1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * mpq7932.c - hwmon with optional regulator driver for mps mpq7932 4 * Copyright 2022 Monolithic Power Systems, Inc 5 * 6 * Author: Saravanan Sekar <saravanan@linumiz.com> 7 */ 8 9 #include <linux/bits.h> 10 #include <linux/err.h> 11 #include <linux/i2c.h> 12 #include <linux/init.h> 13 #include <linux/kernel.h> 14 #include <linux/module.h> 15 #include <linux/of.h> 16 #include <linux/pmbus.h> 17 #include "pmbus.h" 18 19 #define MPQ7932_BUCK_UV_MIN 206250 20 #define MPQ7932_UV_STEP 6250 21 #define MPQ7932_N_VOLTAGES 256 22 #define MPQ7932_VOUT_MAX 0xFF 23 #define MPQ7932_NUM_PAGES 6 24 25 #define MPQ7932_TON_DELAY 0x60 26 #define MPQ7932_VOUT_STARTUP_SLEW 0xA3 27 #define MPQ7932_VOUT_SHUTDOWN_SLEW 0xA5 28 #define MPQ7932_VOUT_SLEW_MASK GENMASK(1, 0) 29 #define MPQ7932_TON_DELAY_MASK GENMASK(4, 0) 30 31 struct mpq7932_data { 32 struct pmbus_driver_info info; 33 struct pmbus_platform_data pdata; 34 }; 35 36 #if IS_ENABLED(CONFIG_SENSORS_MPQ7932_REGULATOR) 37 static struct regulator_desc mpq7932_regulators_desc[] = { 38 PMBUS_REGULATOR_STEP("buck", 0, MPQ7932_N_VOLTAGES, 39 MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN), 40 PMBUS_REGULATOR_STEP("buck", 1, MPQ7932_N_VOLTAGES, 41 MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN), 42 PMBUS_REGULATOR_STEP("buck", 2, MPQ7932_N_VOLTAGES, 43 MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN), 44 PMBUS_REGULATOR_STEP("buck", 3, MPQ7932_N_VOLTAGES, 45 MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN), 46 PMBUS_REGULATOR_STEP("buck", 4, MPQ7932_N_VOLTAGES, 47 MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN), 48 PMBUS_REGULATOR_STEP("buck", 5, MPQ7932_N_VOLTAGES, 49 MPQ7932_UV_STEP, MPQ7932_BUCK_UV_MIN), 50 }; 51 #endif 52 53 static int mpq7932_write_word_data(struct i2c_client *client, int page, int reg, 54 u16 word) 55 { 56 switch (reg) { 57 /* 58 * chip supports only byte access for VOUT_COMMAND otherwise 59 * access results -EREMOTEIO 60 */ 61 case PMBUS_VOUT_COMMAND: 62 return pmbus_write_byte_data(client, page, reg, word & 0xFF); 63 64 default: 65 return -ENODATA; 66 } 67 } 68 69 static int mpq7932_read_word_data(struct i2c_client *client, int page, 70 int phase, int reg) 71 { 72 switch (reg) { 73 /* 74 * chip supports neither (PMBUS_VOUT_MARGIN_HIGH, PMBUS_VOUT_MARGIN_LOW) 75 * nor (PMBUS_MFR_VOUT_MIN, PMBUS_MFR_VOUT_MAX). As a result set voltage 76 * fails due to error in pmbus_regulator_get_low_margin, so faked. 77 */ 78 case PMBUS_MFR_VOUT_MIN: 79 return 0; 80 81 case PMBUS_MFR_VOUT_MAX: 82 return MPQ7932_VOUT_MAX; 83 84 /* 85 * chip supports only byte access for VOUT_COMMAND otherwise 86 * access results in -EREMOTEIO 87 */ 88 case PMBUS_READ_VOUT: 89 return pmbus_read_byte_data(client, page, PMBUS_VOUT_COMMAND); 90 91 default: 92 return -ENODATA; 93 } 94 } 95 96 static int mpq7932_probe(struct i2c_client *client) 97 { 98 struct mpq7932_data *data; 99 struct pmbus_driver_info *info; 100 struct device *dev = &client->dev; 101 int i; 102 103 data = devm_kzalloc(dev, sizeof(struct mpq7932_data), GFP_KERNEL); 104 if (!data) 105 return -ENOMEM; 106 107 info = &data->info; 108 info->pages = MPQ7932_NUM_PAGES; 109 info->format[PSC_VOLTAGE_OUT] = direct; 110 info->m[PSC_VOLTAGE_OUT] = 160; 111 info->b[PSC_VOLTAGE_OUT] = -33; 112 for (i = 0; i < info->pages; i++) { 113 info->func[i] = PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT 114 | PMBUS_HAVE_STATUS_TEMP; 115 } 116 117 #if IS_ENABLED(CONFIG_SENSORS_MPQ7932_REGULATOR) 118 info->num_regulators = ARRAY_SIZE(mpq7932_regulators_desc); 119 info->reg_desc = mpq7932_regulators_desc; 120 #endif 121 122 info->read_word_data = mpq7932_read_word_data; 123 info->write_word_data = mpq7932_write_word_data; 124 125 data->pdata.flags = PMBUS_NO_CAPABILITY; 126 dev->platform_data = &data->pdata; 127 128 return pmbus_do_probe(client, info); 129 } 130 131 static const struct of_device_id mpq7932_of_match[] = { 132 { .compatible = "mps,mpq7932"}, 133 {}, 134 }; 135 MODULE_DEVICE_TABLE(of, mpq7932_of_match); 136 137 static const struct i2c_device_id mpq7932_id[] = { 138 { "mpq7932", }, 139 { }, 140 }; 141 MODULE_DEVICE_TABLE(i2c, mpq7932_id); 142 143 static struct i2c_driver mpq7932_regulator_driver = { 144 .driver = { 145 .name = "mpq7932", 146 .of_match_table = mpq7932_of_match, 147 }, 148 .probe = mpq7932_probe, 149 .id_table = mpq7932_id, 150 }; 151 module_i2c_driver(mpq7932_regulator_driver); 152 153 MODULE_AUTHOR("Saravanan Sekar <saravanan@linumiz.com>"); 154 MODULE_DESCRIPTION("MPQ7932 PMIC regulator driver"); 155 MODULE_LICENSE("GPL"); 156 MODULE_IMPORT_NS(PMBUS); 157