1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Hardware monitoring driver for Maxim MAX16508 and MAX16601. 4 * 5 * Implementation notes: 6 * 7 * This chip series supports two rails, VCORE and VSA. Telemetry information 8 * for the two rails is reported in two subsequent I2C addresses. The driver 9 * instantiates a dummy I2C client at the second I2C address to report 10 * information for the VSA rail in a single instance of the driver. 11 * Telemetry for the VSA rail is reported to the PMBus core in PMBus page 2. 12 * 13 * The chip reports input current using two separate methods. The input current 14 * reported with the standard READ_IIN command is derived from the output 15 * current. The first method is reported to the PMBus core with PMBus page 0, 16 * the second method is reported with PMBus page 1. 17 * 18 * The chip supports reading per-phase temperatures and per-phase input/output 19 * currents for VCORE. Telemetry is reported in vendor specific registers. 20 * The driver translates the vendor specific register values to PMBus standard 21 * register values and reports per-phase information in PMBus page 0. 22 * 23 * Copyright 2019, 2020 Google LLC. 24 */ 25 26 #include <linux/bits.h> 27 #include <linux/i2c.h> 28 #include <linux/init.h> 29 #include <linux/kernel.h> 30 #include <linux/module.h> 31 32 #include "pmbus.h" 33 34 enum chips { max16508, max16601 }; 35 36 #define REG_DEFAULT_NUM_POP 0xc4 37 #define REG_SETPT_DVID 0xd1 38 #define DAC_10MV_MODE BIT(4) 39 #define REG_IOUT_AVG_PK 0xee 40 #define REG_IIN_SENSOR 0xf1 41 #define REG_TOTAL_INPUT_POWER 0xf2 42 #define REG_PHASE_ID 0xf3 43 #define CORE_RAIL_INDICATOR BIT(7) 44 #define REG_PHASE_REPORTING 0xf4 45 46 #define MAX16601_NUM_PHASES 8 47 48 struct max16601_data { 49 enum chips id; 50 struct pmbus_driver_info info; 51 struct i2c_client *vsa; 52 int iout_avg_pkg; 53 }; 54 55 #define to_max16601_data(x) container_of(x, struct max16601_data, info) 56 57 static int max16601_read_byte(struct i2c_client *client, int page, int reg) 58 { 59 const struct pmbus_driver_info *info = pmbus_get_driver_info(client); 60 struct max16601_data *data = to_max16601_data(info); 61 62 if (page > 0) { 63 if (page == 2) /* VSA */ 64 return i2c_smbus_read_byte_data(data->vsa, reg); 65 return -EOPNOTSUPP; 66 } 67 return -ENODATA; 68 } 69 70 static int max16601_read_word(struct i2c_client *client, int page, int phase, 71 int reg) 72 { 73 const struct pmbus_driver_info *info = pmbus_get_driver_info(client); 74 struct max16601_data *data = to_max16601_data(info); 75 u8 buf[I2C_SMBUS_BLOCK_MAX + 1]; 76 int ret; 77 78 switch (page) { 79 case 0: /* VCORE */ 80 if (phase == 0xff) 81 return -ENODATA; 82 switch (reg) { 83 case PMBUS_READ_IIN: 84 case PMBUS_READ_IOUT: 85 case PMBUS_READ_TEMPERATURE_1: 86 ret = i2c_smbus_write_byte_data(client, REG_PHASE_ID, 87 phase); 88 if (ret) 89 return ret; 90 ret = i2c_smbus_read_block_data(client, 91 REG_PHASE_REPORTING, 92 buf); 93 if (ret < 0) 94 return ret; 95 if (ret < 6) 96 return -EIO; 97 switch (reg) { 98 case PMBUS_READ_TEMPERATURE_1: 99 return buf[1] << 8 | buf[0]; 100 case PMBUS_READ_IOUT: 101 return buf[3] << 8 | buf[2]; 102 case PMBUS_READ_IIN: 103 return buf[5] << 8 | buf[4]; 104 default: 105 break; 106 } 107 } 108 return -EOPNOTSUPP; 109 case 1: /* VCORE, read IIN/PIN from sensor element */ 110 switch (reg) { 111 case PMBUS_READ_IIN: 112 return i2c_smbus_read_word_data(client, REG_IIN_SENSOR); 113 case PMBUS_READ_PIN: 114 return i2c_smbus_read_word_data(client, 115 REG_TOTAL_INPUT_POWER); 116 default: 117 break; 118 } 119 return -EOPNOTSUPP; 120 case 2: /* VSA */ 121 switch (reg) { 122 case PMBUS_VIRT_READ_IOUT_MAX: 123 ret = i2c_smbus_read_word_data(data->vsa, 124 REG_IOUT_AVG_PK); 125 if (ret < 0) 126 return ret; 127 if (sign_extend32(ret, 10) > 128 sign_extend32(data->iout_avg_pkg, 10)) 129 data->iout_avg_pkg = ret; 130 return data->iout_avg_pkg; 131 case PMBUS_VIRT_RESET_IOUT_HISTORY: 132 return 0; 133 case PMBUS_IOUT_OC_FAULT_LIMIT: 134 case PMBUS_IOUT_OC_WARN_LIMIT: 135 case PMBUS_OT_FAULT_LIMIT: 136 case PMBUS_OT_WARN_LIMIT: 137 case PMBUS_READ_IIN: 138 case PMBUS_READ_IOUT: 139 case PMBUS_READ_TEMPERATURE_1: 140 case PMBUS_STATUS_WORD: 141 return i2c_smbus_read_word_data(data->vsa, reg); 142 default: 143 return -EOPNOTSUPP; 144 } 145 default: 146 return -EOPNOTSUPP; 147 } 148 } 149 150 static int max16601_write_byte(struct i2c_client *client, int page, u8 reg) 151 { 152 const struct pmbus_driver_info *info = pmbus_get_driver_info(client); 153 struct max16601_data *data = to_max16601_data(info); 154 155 if (page == 2) { 156 if (reg == PMBUS_CLEAR_FAULTS) 157 return i2c_smbus_write_byte(data->vsa, reg); 158 return -EOPNOTSUPP; 159 } 160 return -ENODATA; 161 } 162 163 static int max16601_write_word(struct i2c_client *client, int page, int reg, 164 u16 value) 165 { 166 const struct pmbus_driver_info *info = pmbus_get_driver_info(client); 167 struct max16601_data *data = to_max16601_data(info); 168 169 switch (page) { 170 case 0: /* VCORE */ 171 return -ENODATA; 172 case 1: /* VCORE IIN/PIN from sensor element */ 173 default: 174 return -EOPNOTSUPP; 175 case 2: /* VSA */ 176 switch (reg) { 177 case PMBUS_VIRT_RESET_IOUT_HISTORY: 178 data->iout_avg_pkg = 0xfc00; 179 return 0; 180 case PMBUS_IOUT_OC_FAULT_LIMIT: 181 case PMBUS_IOUT_OC_WARN_LIMIT: 182 case PMBUS_OT_FAULT_LIMIT: 183 case PMBUS_OT_WARN_LIMIT: 184 return i2c_smbus_write_word_data(data->vsa, reg, value); 185 default: 186 return -EOPNOTSUPP; 187 } 188 } 189 } 190 191 static int max16601_identify(struct i2c_client *client, 192 struct pmbus_driver_info *info) 193 { 194 struct max16601_data *data = to_max16601_data(info); 195 int reg; 196 197 reg = i2c_smbus_read_byte_data(client, REG_SETPT_DVID); 198 if (reg < 0) 199 return reg; 200 if (reg & DAC_10MV_MODE) 201 info->vrm_version[0] = vr13; 202 else 203 info->vrm_version[0] = vr12; 204 205 if (data->id != max16601) 206 return 0; 207 208 reg = i2c_smbus_read_byte_data(client, REG_DEFAULT_NUM_POP); 209 if (reg < 0) 210 return reg; 211 212 /* 213 * If REG_DEFAULT_NUM_POP returns 0, we don't know how many phases 214 * are populated. Stick with the default in that case. 215 */ 216 reg &= 0x0f; 217 if (reg && reg <= MAX16601_NUM_PHASES) 218 info->phases[0] = reg; 219 220 return 0; 221 } 222 223 static struct pmbus_driver_info max16601_info = { 224 .pages = 3, 225 .format[PSC_VOLTAGE_IN] = linear, 226 .format[PSC_VOLTAGE_OUT] = vid, 227 .format[PSC_CURRENT_IN] = linear, 228 .format[PSC_CURRENT_OUT] = linear, 229 .format[PSC_TEMPERATURE] = linear, 230 .format[PSC_POWER] = linear, 231 .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN | 232 PMBUS_HAVE_STATUS_INPUT | 233 PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | 234 PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | 235 PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | 236 PMBUS_HAVE_POUT | PMBUS_PAGE_VIRTUAL | PMBUS_PHASE_VIRTUAL, 237 .func[1] = PMBUS_HAVE_IIN | PMBUS_HAVE_PIN | PMBUS_PAGE_VIRTUAL, 238 .func[2] = PMBUS_HAVE_IIN | PMBUS_HAVE_STATUS_INPUT | 239 PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | 240 PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP | PMBUS_PAGE_VIRTUAL, 241 .phases[0] = MAX16601_NUM_PHASES, 242 .pfunc[0] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP, 243 .pfunc[1] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT, 244 .pfunc[2] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP, 245 .pfunc[3] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT, 246 .pfunc[4] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP, 247 .pfunc[5] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT, 248 .pfunc[6] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT | PMBUS_HAVE_TEMP, 249 .pfunc[7] = PMBUS_HAVE_IIN | PMBUS_HAVE_IOUT, 250 .identify = max16601_identify, 251 .read_byte_data = max16601_read_byte, 252 .read_word_data = max16601_read_word, 253 .write_byte = max16601_write_byte, 254 .write_word_data = max16601_write_word, 255 }; 256 257 static void max16601_remove(void *_data) 258 { 259 struct max16601_data *data = _data; 260 261 i2c_unregister_device(data->vsa); 262 } 263 264 static const struct i2c_device_id max16601_id[] = { 265 {"max16508", max16508}, 266 {"max16601", max16601}, 267 {} 268 }; 269 MODULE_DEVICE_TABLE(i2c, max16601_id); 270 271 static int max16601_get_id(struct i2c_client *client) 272 { 273 struct device *dev = &client->dev; 274 u8 buf[I2C_SMBUS_BLOCK_MAX + 1]; 275 enum chips id; 276 int ret; 277 278 ret = i2c_smbus_read_block_data(client, PMBUS_IC_DEVICE_ID, buf); 279 if (ret < 0 || ret < 11) 280 return -ENODEV; 281 282 /* 283 * PMBUS_IC_DEVICE_ID is expected to return "MAX16601y.xx" 284 * or "MAX16500y.xx". 285 */ 286 if (!strncmp(buf, "MAX16500", 8)) { 287 id = max16508; 288 } else if (!strncmp(buf, "MAX16601", 8)) { 289 id = max16601; 290 } else { 291 buf[ret] = '\0'; 292 dev_err(dev, "Unsupported chip '%s'\n", buf); 293 return -ENODEV; 294 } 295 return id; 296 } 297 298 static int max16601_probe(struct i2c_client *client) 299 { 300 struct device *dev = &client->dev; 301 const struct i2c_device_id *id; 302 struct max16601_data *data; 303 int ret, chip_id; 304 305 if (!i2c_check_functionality(client->adapter, 306 I2C_FUNC_SMBUS_READ_BYTE_DATA | 307 I2C_FUNC_SMBUS_READ_BLOCK_DATA)) 308 return -ENODEV; 309 310 chip_id = max16601_get_id(client); 311 if (chip_id < 0) 312 return chip_id; 313 314 id = i2c_match_id(max16601_id, client); 315 if (chip_id != id->driver_data) 316 dev_warn(&client->dev, 317 "Device mismatch: Configured %s (%d), detected %d\n", 318 id->name, (int) id->driver_data, chip_id); 319 320 ret = i2c_smbus_read_byte_data(client, REG_PHASE_ID); 321 if (ret < 0) 322 return ret; 323 if (!(ret & CORE_RAIL_INDICATOR)) { 324 dev_err(dev, 325 "Driver must be instantiated on CORE rail I2C address\n"); 326 return -ENODEV; 327 } 328 329 data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); 330 if (!data) 331 return -ENOMEM; 332 333 data->id = chip_id; 334 data->iout_avg_pkg = 0xfc00; 335 data->vsa = i2c_new_dummy_device(client->adapter, client->addr + 1); 336 if (IS_ERR(data->vsa)) { 337 dev_err(dev, "Failed to register VSA client\n"); 338 return PTR_ERR(data->vsa); 339 } 340 ret = devm_add_action_or_reset(dev, max16601_remove, data); 341 if (ret) 342 return ret; 343 344 data->info = max16601_info; 345 346 return pmbus_do_probe(client, &data->info); 347 } 348 349 static struct i2c_driver max16601_driver = { 350 .driver = { 351 .name = "max16601", 352 }, 353 .probe_new = max16601_probe, 354 .id_table = max16601_id, 355 }; 356 357 module_i2c_driver(max16601_driver); 358 359 MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>"); 360 MODULE_DESCRIPTION("PMBus driver for Maxim MAX16601"); 361 MODULE_LICENSE("GPL v2"); 362 MODULE_IMPORT_NS(PMBUS); 363