1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Hardware monitoring driver for Analog Devices ADM1275 Hot-Swap Controller 4 * and Digital Power Monitor 5 * 6 * Copyright (c) 2011 Ericsson AB. 7 * Copyright (c) 2018 Guenter Roeck 8 */ 9 10 #include <linux/kernel.h> 11 #include <linux/module.h> 12 #include <linux/init.h> 13 #include <linux/err.h> 14 #include <linux/slab.h> 15 #include <linux/i2c.h> 16 #include <linux/bitops.h> 17 #include <linux/bitfield.h> 18 #include <linux/log2.h> 19 #include "pmbus.h" 20 21 enum chips { adm1075, adm1272, adm1275, adm1276, adm1278, adm1293, adm1294 }; 22 23 #define ADM1275_MFR_STATUS_IOUT_WARN2 BIT(0) 24 #define ADM1293_MFR_STATUS_VAUX_UV_WARN BIT(5) 25 #define ADM1293_MFR_STATUS_VAUX_OV_WARN BIT(6) 26 27 #define ADM1275_PEAK_IOUT 0xd0 28 #define ADM1275_PEAK_VIN 0xd1 29 #define ADM1275_PEAK_VOUT 0xd2 30 #define ADM1275_PMON_CONFIG 0xd4 31 32 #define ADM1275_VIN_VOUT_SELECT BIT(6) 33 #define ADM1275_VRANGE BIT(5) 34 #define ADM1075_IRANGE_50 BIT(4) 35 #define ADM1075_IRANGE_25 BIT(3) 36 #define ADM1075_IRANGE_MASK (BIT(3) | BIT(4)) 37 38 #define ADM1272_IRANGE BIT(0) 39 40 #define ADM1278_TEMP1_EN BIT(3) 41 #define ADM1278_VIN_EN BIT(2) 42 #define ADM1278_VOUT_EN BIT(1) 43 44 #define ADM1293_IRANGE_25 0 45 #define ADM1293_IRANGE_50 BIT(6) 46 #define ADM1293_IRANGE_100 BIT(7) 47 #define ADM1293_IRANGE_200 (BIT(6) | BIT(7)) 48 #define ADM1293_IRANGE_MASK (BIT(6) | BIT(7)) 49 50 #define ADM1293_VIN_SEL_012 BIT(2) 51 #define ADM1293_VIN_SEL_074 BIT(3) 52 #define ADM1293_VIN_SEL_210 (BIT(2) | BIT(3)) 53 #define ADM1293_VIN_SEL_MASK (BIT(2) | BIT(3)) 54 55 #define ADM1293_VAUX_EN BIT(1) 56 57 #define ADM1278_PEAK_TEMP 0xd7 58 #define ADM1275_IOUT_WARN2_LIMIT 0xd7 59 #define ADM1275_DEVICE_CONFIG 0xd8 60 61 #define ADM1275_IOUT_WARN2_SELECT BIT(4) 62 63 #define ADM1276_PEAK_PIN 0xda 64 #define ADM1075_READ_VAUX 0xdd 65 #define ADM1075_VAUX_OV_WARN_LIMIT 0xde 66 #define ADM1075_VAUX_UV_WARN_LIMIT 0xdf 67 #define ADM1293_IOUT_MIN 0xe3 68 #define ADM1293_PIN_MIN 0xe4 69 #define ADM1075_VAUX_STATUS 0xf6 70 71 #define ADM1075_VAUX_OV_WARN BIT(7) 72 #define ADM1075_VAUX_UV_WARN BIT(6) 73 74 #define ADM1275_VI_AVG_SHIFT 0 75 #define ADM1275_VI_AVG_MASK GENMASK(ADM1275_VI_AVG_SHIFT + 2, \ 76 ADM1275_VI_AVG_SHIFT) 77 #define ADM1275_SAMPLES_AVG_MAX 128 78 79 #define ADM1278_PWR_AVG_SHIFT 11 80 #define ADM1278_PWR_AVG_MASK GENMASK(ADM1278_PWR_AVG_SHIFT + 2, \ 81 ADM1278_PWR_AVG_SHIFT) 82 #define ADM1278_VI_AVG_SHIFT 8 83 #define ADM1278_VI_AVG_MASK GENMASK(ADM1278_VI_AVG_SHIFT + 2, \ 84 ADM1278_VI_AVG_SHIFT) 85 86 struct adm1275_data { 87 int id; 88 bool have_oc_fault; 89 bool have_uc_fault; 90 bool have_vout; 91 bool have_vaux_status; 92 bool have_mfr_vaux_status; 93 bool have_iout_min; 94 bool have_pin_min; 95 bool have_pin_max; 96 bool have_temp_max; 97 bool have_power_sampling; 98 struct pmbus_driver_info info; 99 }; 100 101 #define to_adm1275_data(x) container_of(x, struct adm1275_data, info) 102 103 struct coefficients { 104 s16 m; 105 s16 b; 106 s16 R; 107 }; 108 109 static const struct coefficients adm1075_coefficients[] = { 110 [0] = { 27169, 0, -1 }, /* voltage */ 111 [1] = { 806, 20475, -1 }, /* current, irange25 */ 112 [2] = { 404, 20475, -1 }, /* current, irange50 */ 113 [3] = { 8549, 0, -1 }, /* power, irange25 */ 114 [4] = { 4279, 0, -1 }, /* power, irange50 */ 115 }; 116 117 static const struct coefficients adm1272_coefficients[] = { 118 [0] = { 6770, 0, -2 }, /* voltage, vrange 60V */ 119 [1] = { 4062, 0, -2 }, /* voltage, vrange 100V */ 120 [2] = { 1326, 20480, -1 }, /* current, vsense range 15mV */ 121 [3] = { 663, 20480, -1 }, /* current, vsense range 30mV */ 122 [4] = { 3512, 0, -2 }, /* power, vrange 60V, irange 15mV */ 123 [5] = { 21071, 0, -3 }, /* power, vrange 100V, irange 15mV */ 124 [6] = { 17561, 0, -3 }, /* power, vrange 60V, irange 30mV */ 125 [7] = { 10535, 0, -3 }, /* power, vrange 100V, irange 30mV */ 126 [8] = { 42, 31871, -1 }, /* temperature */ 127 128 }; 129 130 static const struct coefficients adm1275_coefficients[] = { 131 [0] = { 19199, 0, -2 }, /* voltage, vrange set */ 132 [1] = { 6720, 0, -1 }, /* voltage, vrange not set */ 133 [2] = { 807, 20475, -1 }, /* current */ 134 }; 135 136 static const struct coefficients adm1276_coefficients[] = { 137 [0] = { 19199, 0, -2 }, /* voltage, vrange set */ 138 [1] = { 6720, 0, -1 }, /* voltage, vrange not set */ 139 [2] = { 807, 20475, -1 }, /* current */ 140 [3] = { 6043, 0, -2 }, /* power, vrange set */ 141 [4] = { 2115, 0, -1 }, /* power, vrange not set */ 142 }; 143 144 static const struct coefficients adm1278_coefficients[] = { 145 [0] = { 19599, 0, -2 }, /* voltage */ 146 [1] = { 800, 20475, -1 }, /* current */ 147 [2] = { 6123, 0, -2 }, /* power */ 148 [3] = { 42, 31880, -1 }, /* temperature */ 149 }; 150 151 static const struct coefficients adm1293_coefficients[] = { 152 [0] = { 3333, -1, 0 }, /* voltage, vrange 1.2V */ 153 [1] = { 5552, -5, -1 }, /* voltage, vrange 7.4V */ 154 [2] = { 19604, -50, -2 }, /* voltage, vrange 21V */ 155 [3] = { 8000, -100, -2 }, /* current, irange25 */ 156 [4] = { 4000, -100, -2 }, /* current, irange50 */ 157 [5] = { 20000, -1000, -3 }, /* current, irange100 */ 158 [6] = { 10000, -1000, -3 }, /* current, irange200 */ 159 [7] = { 10417, 0, -1 }, /* power, 1.2V, irange25 */ 160 [8] = { 5208, 0, -1 }, /* power, 1.2V, irange50 */ 161 [9] = { 26042, 0, -2 }, /* power, 1.2V, irange100 */ 162 [10] = { 13021, 0, -2 }, /* power, 1.2V, irange200 */ 163 [11] = { 17351, 0, -2 }, /* power, 7.4V, irange25 */ 164 [12] = { 8676, 0, -2 }, /* power, 7.4V, irange50 */ 165 [13] = { 4338, 0, -2 }, /* power, 7.4V, irange100 */ 166 [14] = { 21689, 0, -3 }, /* power, 7.4V, irange200 */ 167 [15] = { 6126, 0, -2 }, /* power, 21V, irange25 */ 168 [16] = { 30631, 0, -3 }, /* power, 21V, irange50 */ 169 [17] = { 15316, 0, -3 }, /* power, 21V, irange100 */ 170 [18] = { 7658, 0, -3 }, /* power, 21V, irange200 */ 171 }; 172 173 static int adm1275_read_pmon_config(const struct adm1275_data *data, 174 struct i2c_client *client, bool is_power) 175 { 176 int shift, ret; 177 u16 mask; 178 179 /* 180 * The PMON configuration register is a 16-bit register only on chips 181 * supporting power average sampling. On other chips it is an 8-bit 182 * register. 183 */ 184 if (data->have_power_sampling) { 185 ret = i2c_smbus_read_word_data(client, ADM1275_PMON_CONFIG); 186 mask = is_power ? ADM1278_PWR_AVG_MASK : ADM1278_VI_AVG_MASK; 187 shift = is_power ? ADM1278_PWR_AVG_SHIFT : ADM1278_VI_AVG_SHIFT; 188 } else { 189 ret = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG); 190 mask = ADM1275_VI_AVG_MASK; 191 shift = ADM1275_VI_AVG_SHIFT; 192 } 193 if (ret < 0) 194 return ret; 195 196 return (ret & mask) >> shift; 197 } 198 199 static int adm1275_write_pmon_config(const struct adm1275_data *data, 200 struct i2c_client *client, 201 bool is_power, u16 word) 202 { 203 int shift, ret; 204 u16 mask; 205 206 if (data->have_power_sampling) { 207 ret = i2c_smbus_read_word_data(client, ADM1275_PMON_CONFIG); 208 mask = is_power ? ADM1278_PWR_AVG_MASK : ADM1278_VI_AVG_MASK; 209 shift = is_power ? ADM1278_PWR_AVG_SHIFT : ADM1278_VI_AVG_SHIFT; 210 } else { 211 ret = i2c_smbus_read_byte_data(client, ADM1275_PMON_CONFIG); 212 mask = ADM1275_VI_AVG_MASK; 213 shift = ADM1275_VI_AVG_SHIFT; 214 } 215 if (ret < 0) 216 return ret; 217 218 word = (ret & ~mask) | ((word << shift) & mask); 219 if (data->have_power_sampling) 220 ret = i2c_smbus_write_word_data(client, ADM1275_PMON_CONFIG, 221 word); 222 else 223 ret = i2c_smbus_write_byte_data(client, ADM1275_PMON_CONFIG, 224 word); 225 226 return ret; 227 } 228 229 static int adm1275_read_word_data(struct i2c_client *client, int page, 230 int phase, int reg) 231 { 232 const struct pmbus_driver_info *info = pmbus_get_driver_info(client); 233 const struct adm1275_data *data = to_adm1275_data(info); 234 int ret = 0; 235 236 if (page > 0) 237 return -ENXIO; 238 239 switch (reg) { 240 case PMBUS_IOUT_UC_FAULT_LIMIT: 241 if (!data->have_uc_fault) 242 return -ENXIO; 243 ret = pmbus_read_word_data(client, 0, 0xff, 244 ADM1275_IOUT_WARN2_LIMIT); 245 break; 246 case PMBUS_IOUT_OC_FAULT_LIMIT: 247 if (!data->have_oc_fault) 248 return -ENXIO; 249 ret = pmbus_read_word_data(client, 0, 0xff, 250 ADM1275_IOUT_WARN2_LIMIT); 251 break; 252 case PMBUS_VOUT_OV_WARN_LIMIT: 253 if (data->have_vout) 254 return -ENODATA; 255 ret = pmbus_read_word_data(client, 0, 0xff, 256 ADM1075_VAUX_OV_WARN_LIMIT); 257 break; 258 case PMBUS_VOUT_UV_WARN_LIMIT: 259 if (data->have_vout) 260 return -ENODATA; 261 ret = pmbus_read_word_data(client, 0, 0xff, 262 ADM1075_VAUX_UV_WARN_LIMIT); 263 break; 264 case PMBUS_READ_VOUT: 265 if (data->have_vout) 266 return -ENODATA; 267 ret = pmbus_read_word_data(client, 0, 0xff, 268 ADM1075_READ_VAUX); 269 break; 270 case PMBUS_VIRT_READ_IOUT_MIN: 271 if (!data->have_iout_min) 272 return -ENXIO; 273 ret = pmbus_read_word_data(client, 0, 0xff, 274 ADM1293_IOUT_MIN); 275 break; 276 case PMBUS_VIRT_READ_IOUT_MAX: 277 ret = pmbus_read_word_data(client, 0, 0xff, 278 ADM1275_PEAK_IOUT); 279 break; 280 case PMBUS_VIRT_READ_VOUT_MAX: 281 ret = pmbus_read_word_data(client, 0, 0xff, 282 ADM1275_PEAK_VOUT); 283 break; 284 case PMBUS_VIRT_READ_VIN_MAX: 285 ret = pmbus_read_word_data(client, 0, 0xff, 286 ADM1275_PEAK_VIN); 287 break; 288 case PMBUS_VIRT_READ_PIN_MIN: 289 if (!data->have_pin_min) 290 return -ENXIO; 291 ret = pmbus_read_word_data(client, 0, 0xff, 292 ADM1293_PIN_MIN); 293 break; 294 case PMBUS_VIRT_READ_PIN_MAX: 295 if (!data->have_pin_max) 296 return -ENXIO; 297 ret = pmbus_read_word_data(client, 0, 0xff, 298 ADM1276_PEAK_PIN); 299 break; 300 case PMBUS_VIRT_READ_TEMP_MAX: 301 if (!data->have_temp_max) 302 return -ENXIO; 303 ret = pmbus_read_word_data(client, 0, 0xff, 304 ADM1278_PEAK_TEMP); 305 break; 306 case PMBUS_VIRT_RESET_IOUT_HISTORY: 307 case PMBUS_VIRT_RESET_VOUT_HISTORY: 308 case PMBUS_VIRT_RESET_VIN_HISTORY: 309 break; 310 case PMBUS_VIRT_RESET_PIN_HISTORY: 311 if (!data->have_pin_max) 312 return -ENXIO; 313 break; 314 case PMBUS_VIRT_RESET_TEMP_HISTORY: 315 if (!data->have_temp_max) 316 return -ENXIO; 317 break; 318 case PMBUS_VIRT_POWER_SAMPLES: 319 if (!data->have_power_sampling) 320 return -ENXIO; 321 ret = adm1275_read_pmon_config(data, client, true); 322 if (ret < 0) 323 break; 324 ret = BIT(ret); 325 break; 326 case PMBUS_VIRT_IN_SAMPLES: 327 case PMBUS_VIRT_CURR_SAMPLES: 328 ret = adm1275_read_pmon_config(data, client, false); 329 if (ret < 0) 330 break; 331 ret = BIT(ret); 332 break; 333 default: 334 ret = -ENODATA; 335 break; 336 } 337 return ret; 338 } 339 340 static int adm1275_write_word_data(struct i2c_client *client, int page, int reg, 341 u16 word) 342 { 343 const struct pmbus_driver_info *info = pmbus_get_driver_info(client); 344 const struct adm1275_data *data = to_adm1275_data(info); 345 int ret; 346 347 if (page > 0) 348 return -ENXIO; 349 350 switch (reg) { 351 case PMBUS_IOUT_UC_FAULT_LIMIT: 352 case PMBUS_IOUT_OC_FAULT_LIMIT: 353 ret = pmbus_write_word_data(client, 0, ADM1275_IOUT_WARN2_LIMIT, 354 word); 355 break; 356 case PMBUS_VIRT_RESET_IOUT_HISTORY: 357 ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_IOUT, 0); 358 if (!ret && data->have_iout_min) 359 ret = pmbus_write_word_data(client, 0, 360 ADM1293_IOUT_MIN, 0); 361 break; 362 case PMBUS_VIRT_RESET_VOUT_HISTORY: 363 ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_VOUT, 0); 364 break; 365 case PMBUS_VIRT_RESET_VIN_HISTORY: 366 ret = pmbus_write_word_data(client, 0, ADM1275_PEAK_VIN, 0); 367 break; 368 case PMBUS_VIRT_RESET_PIN_HISTORY: 369 ret = pmbus_write_word_data(client, 0, ADM1276_PEAK_PIN, 0); 370 if (!ret && data->have_pin_min) 371 ret = pmbus_write_word_data(client, 0, 372 ADM1293_PIN_MIN, 0); 373 break; 374 case PMBUS_VIRT_RESET_TEMP_HISTORY: 375 ret = pmbus_write_word_data(client, 0, ADM1278_PEAK_TEMP, 0); 376 break; 377 case PMBUS_VIRT_POWER_SAMPLES: 378 if (!data->have_power_sampling) 379 return -ENXIO; 380 word = clamp_val(word, 1, ADM1275_SAMPLES_AVG_MAX); 381 ret = adm1275_write_pmon_config(data, client, true, 382 ilog2(word)); 383 break; 384 case PMBUS_VIRT_IN_SAMPLES: 385 case PMBUS_VIRT_CURR_SAMPLES: 386 word = clamp_val(word, 1, ADM1275_SAMPLES_AVG_MAX); 387 ret = adm1275_write_pmon_config(data, client, false, 388 ilog2(word)); 389 break; 390 default: 391 ret = -ENODATA; 392 break; 393 } 394 return ret; 395 } 396 397 static int adm1275_read_byte_data(struct i2c_client *client, int page, int reg) 398 { 399 const struct pmbus_driver_info *info = pmbus_get_driver_info(client); 400 const struct adm1275_data *data = to_adm1275_data(info); 401 int mfr_status, ret; 402 403 if (page > 0) 404 return -ENXIO; 405 406 switch (reg) { 407 case PMBUS_STATUS_IOUT: 408 ret = pmbus_read_byte_data(client, page, PMBUS_STATUS_IOUT); 409 if (ret < 0) 410 break; 411 if (!data->have_oc_fault && !data->have_uc_fault) 412 break; 413 mfr_status = pmbus_read_byte_data(client, page, 414 PMBUS_STATUS_MFR_SPECIFIC); 415 if (mfr_status < 0) 416 return mfr_status; 417 if (mfr_status & ADM1275_MFR_STATUS_IOUT_WARN2) { 418 ret |= data->have_oc_fault ? 419 PB_IOUT_OC_FAULT : PB_IOUT_UC_FAULT; 420 } 421 break; 422 case PMBUS_STATUS_VOUT: 423 if (data->have_vout) 424 return -ENODATA; 425 ret = 0; 426 if (data->have_vaux_status) { 427 mfr_status = pmbus_read_byte_data(client, 0, 428 ADM1075_VAUX_STATUS); 429 if (mfr_status < 0) 430 return mfr_status; 431 if (mfr_status & ADM1075_VAUX_OV_WARN) 432 ret |= PB_VOLTAGE_OV_WARNING; 433 if (mfr_status & ADM1075_VAUX_UV_WARN) 434 ret |= PB_VOLTAGE_UV_WARNING; 435 } else if (data->have_mfr_vaux_status) { 436 mfr_status = pmbus_read_byte_data(client, page, 437 PMBUS_STATUS_MFR_SPECIFIC); 438 if (mfr_status < 0) 439 return mfr_status; 440 if (mfr_status & ADM1293_MFR_STATUS_VAUX_OV_WARN) 441 ret |= PB_VOLTAGE_OV_WARNING; 442 if (mfr_status & ADM1293_MFR_STATUS_VAUX_UV_WARN) 443 ret |= PB_VOLTAGE_UV_WARNING; 444 } 445 break; 446 default: 447 ret = -ENODATA; 448 break; 449 } 450 return ret; 451 } 452 453 static const struct i2c_device_id adm1275_id[] = { 454 { "adm1075", adm1075 }, 455 { "adm1272", adm1272 }, 456 { "adm1275", adm1275 }, 457 { "adm1276", adm1276 }, 458 { "adm1278", adm1278 }, 459 { "adm1293", adm1293 }, 460 { "adm1294", adm1294 }, 461 { } 462 }; 463 MODULE_DEVICE_TABLE(i2c, adm1275_id); 464 465 static int adm1275_probe(struct i2c_client *client) 466 { 467 s32 (*config_read_fn)(const struct i2c_client *client, u8 reg); 468 u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1]; 469 int config, device_config; 470 int ret; 471 struct pmbus_driver_info *info; 472 struct adm1275_data *data; 473 const struct i2c_device_id *mid; 474 const struct coefficients *coefficients; 475 int vindex = -1, voindex = -1, cindex = -1, pindex = -1; 476 int tindex = -1; 477 u32 shunt; 478 479 if (!i2c_check_functionality(client->adapter, 480 I2C_FUNC_SMBUS_READ_BYTE_DATA 481 | I2C_FUNC_SMBUS_BLOCK_DATA)) 482 return -ENODEV; 483 484 ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, block_buffer); 485 if (ret < 0) { 486 dev_err(&client->dev, "Failed to read Manufacturer ID\n"); 487 return ret; 488 } 489 if (ret != 3 || strncmp(block_buffer, "ADI", 3)) { 490 dev_err(&client->dev, "Unsupported Manufacturer ID\n"); 491 return -ENODEV; 492 } 493 494 ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, block_buffer); 495 if (ret < 0) { 496 dev_err(&client->dev, "Failed to read Manufacturer Model\n"); 497 return ret; 498 } 499 for (mid = adm1275_id; mid->name[0]; mid++) { 500 if (!strncasecmp(mid->name, block_buffer, strlen(mid->name))) 501 break; 502 } 503 if (!mid->name[0]) { 504 dev_err(&client->dev, "Unsupported device\n"); 505 return -ENODEV; 506 } 507 508 if (strcmp(client->name, mid->name) != 0) 509 dev_notice(&client->dev, 510 "Device mismatch: Configured %s, detected %s\n", 511 client->name, mid->name); 512 513 if (mid->driver_data == adm1272 || mid->driver_data == adm1278 || 514 mid->driver_data == adm1293 || mid->driver_data == adm1294) 515 config_read_fn = i2c_smbus_read_word_data; 516 else 517 config_read_fn = i2c_smbus_read_byte_data; 518 config = config_read_fn(client, ADM1275_PMON_CONFIG); 519 if (config < 0) 520 return config; 521 522 device_config = config_read_fn(client, ADM1275_DEVICE_CONFIG); 523 if (device_config < 0) 524 return device_config; 525 526 data = devm_kzalloc(&client->dev, sizeof(struct adm1275_data), 527 GFP_KERNEL); 528 if (!data) 529 return -ENOMEM; 530 531 if (of_property_read_u32(client->dev.of_node, 532 "shunt-resistor-micro-ohms", &shunt)) 533 shunt = 1000; /* 1 mOhm if not set via DT */ 534 535 if (shunt == 0) 536 return -EINVAL; 537 538 data->id = mid->driver_data; 539 540 info = &data->info; 541 542 info->pages = 1; 543 info->format[PSC_VOLTAGE_IN] = direct; 544 info->format[PSC_VOLTAGE_OUT] = direct; 545 info->format[PSC_CURRENT_OUT] = direct; 546 info->format[PSC_POWER] = direct; 547 info->format[PSC_TEMPERATURE] = direct; 548 info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT | 549 PMBUS_HAVE_SAMPLES; 550 551 info->read_word_data = adm1275_read_word_data; 552 info->read_byte_data = adm1275_read_byte_data; 553 info->write_word_data = adm1275_write_word_data; 554 555 switch (data->id) { 556 case adm1075: 557 if (device_config & ADM1275_IOUT_WARN2_SELECT) 558 data->have_oc_fault = true; 559 else 560 data->have_uc_fault = true; 561 data->have_pin_max = true; 562 data->have_vaux_status = true; 563 564 coefficients = adm1075_coefficients; 565 vindex = 0; 566 switch (config & ADM1075_IRANGE_MASK) { 567 case ADM1075_IRANGE_25: 568 cindex = 1; 569 pindex = 3; 570 break; 571 case ADM1075_IRANGE_50: 572 cindex = 2; 573 pindex = 4; 574 break; 575 default: 576 dev_err(&client->dev, "Invalid input current range"); 577 break; 578 } 579 580 info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN 581 | PMBUS_HAVE_STATUS_INPUT; 582 if (config & ADM1275_VIN_VOUT_SELECT) 583 info->func[0] |= 584 PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; 585 break; 586 case adm1272: 587 data->have_vout = true; 588 data->have_pin_max = true; 589 data->have_temp_max = true; 590 data->have_power_sampling = true; 591 592 coefficients = adm1272_coefficients; 593 vindex = (config & ADM1275_VRANGE) ? 1 : 0; 594 cindex = (config & ADM1272_IRANGE) ? 3 : 2; 595 /* pindex depends on the combination of the above */ 596 switch (config & (ADM1275_VRANGE | ADM1272_IRANGE)) { 597 case 0: 598 default: 599 pindex = 4; 600 break; 601 case ADM1275_VRANGE: 602 pindex = 5; 603 break; 604 case ADM1272_IRANGE: 605 pindex = 6; 606 break; 607 case ADM1275_VRANGE | ADM1272_IRANGE: 608 pindex = 7; 609 break; 610 } 611 tindex = 8; 612 613 info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT | 614 PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; 615 616 /* Enable VOUT if not enabled (it is disabled by default) */ 617 if (!(config & ADM1278_VOUT_EN)) { 618 config |= ADM1278_VOUT_EN; 619 ret = i2c_smbus_write_byte_data(client, 620 ADM1275_PMON_CONFIG, 621 config); 622 if (ret < 0) { 623 dev_err(&client->dev, 624 "Failed to enable VOUT monitoring\n"); 625 return -ENODEV; 626 } 627 } 628 629 if (config & ADM1278_TEMP1_EN) 630 info->func[0] |= 631 PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; 632 if (config & ADM1278_VIN_EN) 633 info->func[0] |= PMBUS_HAVE_VIN; 634 break; 635 case adm1275: 636 if (device_config & ADM1275_IOUT_WARN2_SELECT) 637 data->have_oc_fault = true; 638 else 639 data->have_uc_fault = true; 640 data->have_vout = true; 641 642 coefficients = adm1275_coefficients; 643 vindex = (config & ADM1275_VRANGE) ? 0 : 1; 644 cindex = 2; 645 646 if (config & ADM1275_VIN_VOUT_SELECT) 647 info->func[0] |= 648 PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; 649 else 650 info->func[0] |= 651 PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT; 652 break; 653 case adm1276: 654 if (device_config & ADM1275_IOUT_WARN2_SELECT) 655 data->have_oc_fault = true; 656 else 657 data->have_uc_fault = true; 658 data->have_vout = true; 659 data->have_pin_max = true; 660 661 coefficients = adm1276_coefficients; 662 vindex = (config & ADM1275_VRANGE) ? 0 : 1; 663 cindex = 2; 664 pindex = (config & ADM1275_VRANGE) ? 3 : 4; 665 666 info->func[0] |= PMBUS_HAVE_VIN | PMBUS_HAVE_PIN 667 | PMBUS_HAVE_STATUS_INPUT; 668 if (config & ADM1275_VIN_VOUT_SELECT) 669 info->func[0] |= 670 PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; 671 break; 672 case adm1278: 673 data->have_vout = true; 674 data->have_pin_max = true; 675 data->have_temp_max = true; 676 data->have_power_sampling = true; 677 678 coefficients = adm1278_coefficients; 679 vindex = 0; 680 cindex = 1; 681 pindex = 2; 682 tindex = 3; 683 684 info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT | 685 PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT | 686 PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP; 687 688 /* Enable VOUT & TEMP1 if not enabled (disabled by default) */ 689 if ((config & (ADM1278_VOUT_EN | ADM1278_TEMP1_EN)) != 690 (ADM1278_VOUT_EN | ADM1278_TEMP1_EN)) { 691 config |= ADM1278_VOUT_EN | ADM1278_TEMP1_EN; 692 ret = i2c_smbus_write_byte_data(client, 693 ADM1275_PMON_CONFIG, 694 config); 695 if (ret < 0) { 696 dev_err(&client->dev, 697 "Failed to enable VOUT monitoring\n"); 698 return -ENODEV; 699 } 700 } 701 702 if (config & ADM1278_VIN_EN) 703 info->func[0] |= PMBUS_HAVE_VIN; 704 break; 705 case adm1293: 706 case adm1294: 707 data->have_iout_min = true; 708 data->have_pin_min = true; 709 data->have_pin_max = true; 710 data->have_mfr_vaux_status = true; 711 data->have_power_sampling = true; 712 713 coefficients = adm1293_coefficients; 714 715 voindex = 0; 716 switch (config & ADM1293_VIN_SEL_MASK) { 717 case ADM1293_VIN_SEL_012: /* 1.2V */ 718 vindex = 0; 719 break; 720 case ADM1293_VIN_SEL_074: /* 7.4V */ 721 vindex = 1; 722 break; 723 case ADM1293_VIN_SEL_210: /* 21V */ 724 vindex = 2; 725 break; 726 default: /* disabled */ 727 break; 728 } 729 730 switch (config & ADM1293_IRANGE_MASK) { 731 case ADM1293_IRANGE_25: 732 cindex = 3; 733 break; 734 case ADM1293_IRANGE_50: 735 cindex = 4; 736 break; 737 case ADM1293_IRANGE_100: 738 cindex = 5; 739 break; 740 case ADM1293_IRANGE_200: 741 cindex = 6; 742 break; 743 } 744 745 if (vindex >= 0) 746 pindex = 7 + vindex * 4 + (cindex - 3); 747 748 if (config & ADM1293_VAUX_EN) 749 info->func[0] |= 750 PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT; 751 752 info->func[0] |= PMBUS_HAVE_PIN | 753 PMBUS_HAVE_VIN | PMBUS_HAVE_STATUS_INPUT; 754 755 break; 756 default: 757 dev_err(&client->dev, "Unsupported device\n"); 758 return -ENODEV; 759 } 760 761 if (voindex < 0) 762 voindex = vindex; 763 if (vindex >= 0) { 764 info->m[PSC_VOLTAGE_IN] = coefficients[vindex].m; 765 info->b[PSC_VOLTAGE_IN] = coefficients[vindex].b; 766 info->R[PSC_VOLTAGE_IN] = coefficients[vindex].R; 767 } 768 if (voindex >= 0) { 769 info->m[PSC_VOLTAGE_OUT] = coefficients[voindex].m; 770 info->b[PSC_VOLTAGE_OUT] = coefficients[voindex].b; 771 info->R[PSC_VOLTAGE_OUT] = coefficients[voindex].R; 772 } 773 if (cindex >= 0) { 774 /* Scale current with sense resistor value */ 775 info->m[PSC_CURRENT_OUT] = 776 coefficients[cindex].m * shunt / 1000; 777 info->b[PSC_CURRENT_OUT] = coefficients[cindex].b; 778 info->R[PSC_CURRENT_OUT] = coefficients[cindex].R; 779 } 780 if (pindex >= 0) { 781 info->m[PSC_POWER] = 782 coefficients[pindex].m * shunt / 1000; 783 info->b[PSC_POWER] = coefficients[pindex].b; 784 info->R[PSC_POWER] = coefficients[pindex].R; 785 } 786 if (tindex >= 0) { 787 info->m[PSC_TEMPERATURE] = coefficients[tindex].m; 788 info->b[PSC_TEMPERATURE] = coefficients[tindex].b; 789 info->R[PSC_TEMPERATURE] = coefficients[tindex].R; 790 } 791 792 return pmbus_do_probe(client, info); 793 } 794 795 static struct i2c_driver adm1275_driver = { 796 .driver = { 797 .name = "adm1275", 798 }, 799 .probe_new = adm1275_probe, 800 .remove = pmbus_do_remove, 801 .id_table = adm1275_id, 802 }; 803 804 module_i2c_driver(adm1275_driver); 805 806 MODULE_AUTHOR("Guenter Roeck"); 807 MODULE_DESCRIPTION("PMBus driver for Analog Devices ADM1275 and compatibles"); 808 MODULE_LICENSE("GPL"); 809