1 // SPDX-License-Identifier: GPL-2.0
2 // Copyright (c) 2014-2018 Nuvoton Technology corporation.
3 
4 #include <linux/clk.h>
5 #include <linux/device.h>
6 #include <linux/hwmon.h>
7 #include <linux/hwmon-sysfs.h>
8 #include <linux/interrupt.h>
9 #include <linux/kernel.h>
10 #include <linux/module.h>
11 #include <linux/of_address.h>
12 #include <linux/of_irq.h>
13 #include <linux/platform_device.h>
14 #include <linux/spinlock.h>
15 #include <linux/sysfs.h>
16 #include <linux/thermal.h>
17 
18 /* NPCM7XX PWM registers */
19 #define NPCM7XX_PWM_REG_BASE(base, n)    ((base) + ((n) * 0x1000L))
20 
21 #define NPCM7XX_PWM_REG_PR(base, n)	(NPCM7XX_PWM_REG_BASE(base, n) + 0x00)
22 #define NPCM7XX_PWM_REG_CSR(base, n)	(NPCM7XX_PWM_REG_BASE(base, n) + 0x04)
23 #define NPCM7XX_PWM_REG_CR(base, n)	(NPCM7XX_PWM_REG_BASE(base, n) + 0x08)
24 #define NPCM7XX_PWM_REG_CNRx(base, n, ch) \
25 			(NPCM7XX_PWM_REG_BASE(base, n) + 0x0C + (12 * (ch)))
26 #define NPCM7XX_PWM_REG_CMRx(base, n, ch) \
27 			(NPCM7XX_PWM_REG_BASE(base, n) + 0x10 + (12 * (ch)))
28 #define NPCM7XX_PWM_REG_PDRx(base, n, ch) \
29 			(NPCM7XX_PWM_REG_BASE(base, n) + 0x14 + (12 * (ch)))
30 #define NPCM7XX_PWM_REG_PIER(base, n)	(NPCM7XX_PWM_REG_BASE(base, n) + 0x3C)
31 #define NPCM7XX_PWM_REG_PIIR(base, n)	(NPCM7XX_PWM_REG_BASE(base, n) + 0x40)
32 
33 #define NPCM7XX_PWM_CTRL_CH0_MODE_BIT		BIT(3)
34 #define NPCM7XX_PWM_CTRL_CH1_MODE_BIT		BIT(11)
35 #define NPCM7XX_PWM_CTRL_CH2_MODE_BIT		BIT(15)
36 #define NPCM7XX_PWM_CTRL_CH3_MODE_BIT		BIT(19)
37 
38 #define NPCM7XX_PWM_CTRL_CH0_INV_BIT		BIT(2)
39 #define NPCM7XX_PWM_CTRL_CH1_INV_BIT		BIT(10)
40 #define NPCM7XX_PWM_CTRL_CH2_INV_BIT		BIT(14)
41 #define NPCM7XX_PWM_CTRL_CH3_INV_BIT		BIT(18)
42 
43 #define NPCM7XX_PWM_CTRL_CH0_EN_BIT		BIT(0)
44 #define NPCM7XX_PWM_CTRL_CH1_EN_BIT		BIT(8)
45 #define NPCM7XX_PWM_CTRL_CH2_EN_BIT		BIT(12)
46 #define NPCM7XX_PWM_CTRL_CH3_EN_BIT		BIT(16)
47 
48 /* Define the maximum PWM channel number */
49 #define NPCM7XX_PWM_MAX_CHN_NUM			8
50 #define NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE	4
51 #define NPCM7XX_PWM_MAX_MODULES                 2
52 
53 /* Define the Counter Register, value = 100 for match 100% */
54 #define NPCM7XX_PWM_COUNTER_DEFAULT_NUM		255
55 #define NPCM7XX_PWM_CMR_DEFAULT_NUM		255
56 #define NPCM7XX_PWM_CMR_MAX			255
57 
58 /* default all PWM channels PRESCALE2 = 1 */
59 #define NPCM7XX_PWM_PRESCALE2_DEFAULT_CH0	0x4
60 #define NPCM7XX_PWM_PRESCALE2_DEFAULT_CH1	0x40
61 #define NPCM7XX_PWM_PRESCALE2_DEFAULT_CH2	0x400
62 #define NPCM7XX_PWM_PRESCALE2_DEFAULT_CH3	0x4000
63 
64 #define PWM_OUTPUT_FREQ_25KHZ			25000
65 #define PWN_CNT_DEFAULT				256
66 #define MIN_PRESCALE1				2
67 #define NPCM7XX_PWM_PRESCALE_SHIFT_CH01		8
68 
69 #define NPCM7XX_PWM_PRESCALE2_DEFAULT	(NPCM7XX_PWM_PRESCALE2_DEFAULT_CH0 | \
70 					NPCM7XX_PWM_PRESCALE2_DEFAULT_CH1 | \
71 					NPCM7XX_PWM_PRESCALE2_DEFAULT_CH2 | \
72 					NPCM7XX_PWM_PRESCALE2_DEFAULT_CH3)
73 
74 #define NPCM7XX_PWM_CTRL_MODE_DEFAULT	(NPCM7XX_PWM_CTRL_CH0_MODE_BIT | \
75 					NPCM7XX_PWM_CTRL_CH1_MODE_BIT | \
76 					NPCM7XX_PWM_CTRL_CH2_MODE_BIT | \
77 					NPCM7XX_PWM_CTRL_CH3_MODE_BIT)
78 
79 /* NPCM7XX FAN Tacho registers */
80 #define NPCM7XX_FAN_REG_BASE(base, n)	((base) + ((n) * 0x1000L))
81 
82 #define NPCM7XX_FAN_REG_TCNT1(base, n)    (NPCM7XX_FAN_REG_BASE(base, n) + 0x00)
83 #define NPCM7XX_FAN_REG_TCRA(base, n)     (NPCM7XX_FAN_REG_BASE(base, n) + 0x02)
84 #define NPCM7XX_FAN_REG_TCRB(base, n)     (NPCM7XX_FAN_REG_BASE(base, n) + 0x04)
85 #define NPCM7XX_FAN_REG_TCNT2(base, n)    (NPCM7XX_FAN_REG_BASE(base, n) + 0x06)
86 #define NPCM7XX_FAN_REG_TPRSC(base, n)    (NPCM7XX_FAN_REG_BASE(base, n) + 0x08)
87 #define NPCM7XX_FAN_REG_TCKC(base, n)     (NPCM7XX_FAN_REG_BASE(base, n) + 0x0A)
88 #define NPCM7XX_FAN_REG_TMCTRL(base, n)   (NPCM7XX_FAN_REG_BASE(base, n) + 0x0C)
89 #define NPCM7XX_FAN_REG_TICTRL(base, n)   (NPCM7XX_FAN_REG_BASE(base, n) + 0x0E)
90 #define NPCM7XX_FAN_REG_TICLR(base, n)    (NPCM7XX_FAN_REG_BASE(base, n) + 0x10)
91 #define NPCM7XX_FAN_REG_TIEN(base, n)     (NPCM7XX_FAN_REG_BASE(base, n) + 0x12)
92 #define NPCM7XX_FAN_REG_TCPA(base, n)     (NPCM7XX_FAN_REG_BASE(base, n) + 0x14)
93 #define NPCM7XX_FAN_REG_TCPB(base, n)     (NPCM7XX_FAN_REG_BASE(base, n) + 0x16)
94 #define NPCM7XX_FAN_REG_TCPCFG(base, n)   (NPCM7XX_FAN_REG_BASE(base, n) + 0x18)
95 #define NPCM7XX_FAN_REG_TINASEL(base, n)  (NPCM7XX_FAN_REG_BASE(base, n) + 0x1A)
96 #define NPCM7XX_FAN_REG_TINBSEL(base, n)  (NPCM7XX_FAN_REG_BASE(base, n) + 0x1C)
97 
98 #define NPCM7XX_FAN_TCKC_CLKX_NONE	0
99 #define NPCM7XX_FAN_TCKC_CLK1_APB	BIT(0)
100 #define NPCM7XX_FAN_TCKC_CLK2_APB	BIT(3)
101 
102 #define NPCM7XX_FAN_TMCTRL_TBEN		BIT(6)
103 #define NPCM7XX_FAN_TMCTRL_TAEN		BIT(5)
104 #define NPCM7XX_FAN_TMCTRL_TBEDG	BIT(4)
105 #define NPCM7XX_FAN_TMCTRL_TAEDG	BIT(3)
106 #define NPCM7XX_FAN_TMCTRL_MODE_5	BIT(2)
107 
108 #define NPCM7XX_FAN_TICLR_CLEAR_ALL	GENMASK(5, 0)
109 #define NPCM7XX_FAN_TICLR_TFCLR		BIT(5)
110 #define NPCM7XX_FAN_TICLR_TECLR		BIT(4)
111 #define NPCM7XX_FAN_TICLR_TDCLR		BIT(3)
112 #define NPCM7XX_FAN_TICLR_TCCLR		BIT(2)
113 #define NPCM7XX_FAN_TICLR_TBCLR		BIT(1)
114 #define NPCM7XX_FAN_TICLR_TACLR		BIT(0)
115 
116 #define NPCM7XX_FAN_TIEN_ENABLE_ALL	GENMASK(5, 0)
117 #define NPCM7XX_FAN_TIEN_TFIEN		BIT(5)
118 #define NPCM7XX_FAN_TIEN_TEIEN		BIT(4)
119 #define NPCM7XX_FAN_TIEN_TDIEN		BIT(3)
120 #define NPCM7XX_FAN_TIEN_TCIEN		BIT(2)
121 #define NPCM7XX_FAN_TIEN_TBIEN		BIT(1)
122 #define NPCM7XX_FAN_TIEN_TAIEN		BIT(0)
123 
124 #define NPCM7XX_FAN_TICTRL_TFPND	BIT(5)
125 #define NPCM7XX_FAN_TICTRL_TEPND	BIT(4)
126 #define NPCM7XX_FAN_TICTRL_TDPND	BIT(3)
127 #define NPCM7XX_FAN_TICTRL_TCPND	BIT(2)
128 #define NPCM7XX_FAN_TICTRL_TBPND	BIT(1)
129 #define NPCM7XX_FAN_TICTRL_TAPND	BIT(0)
130 
131 #define NPCM7XX_FAN_TCPCFG_HIBEN	BIT(7)
132 #define NPCM7XX_FAN_TCPCFG_EQBEN	BIT(6)
133 #define NPCM7XX_FAN_TCPCFG_LOBEN	BIT(5)
134 #define NPCM7XX_FAN_TCPCFG_CPBSEL	BIT(4)
135 #define NPCM7XX_FAN_TCPCFG_HIAEN	BIT(3)
136 #define NPCM7XX_FAN_TCPCFG_EQAEN	BIT(2)
137 #define NPCM7XX_FAN_TCPCFG_LOAEN	BIT(1)
138 #define NPCM7XX_FAN_TCPCFG_CPASEL	BIT(0)
139 
140 /* FAN General Definition */
141 /* Define the maximum FAN channel number */
142 #define NPCM7XX_FAN_MAX_MODULE			8
143 #define NPCM7XX_FAN_MAX_CHN_NUM_IN_A_MODULE	2
144 #define NPCM7XX_FAN_MAX_CHN_NUM			16
145 
146 /*
147  * Get Fan Tach Timeout (base on clock 214843.75Hz, 1 cnt = 4.654us)
148  * Timeout 94ms ~= 0x5000
149  * (The minimum FAN speed could to support ~640RPM/pulse 1,
150  * 320RPM/pulse 2, ...-- 10.6Hz)
151  */
152 #define NPCM7XX_FAN_TIMEOUT	0x5000
153 #define NPCM7XX_FAN_TCNT	0xFFFF
154 #define NPCM7XX_FAN_TCPA	(NPCM7XX_FAN_TCNT - NPCM7XX_FAN_TIMEOUT)
155 #define NPCM7XX_FAN_TCPB	(NPCM7XX_FAN_TCNT - NPCM7XX_FAN_TIMEOUT)
156 
157 #define NPCM7XX_FAN_POLL_TIMER_200MS			200
158 #define NPCM7XX_FAN_DEFAULT_PULSE_PER_REVOLUTION	2
159 #define NPCM7XX_FAN_TINASEL_FANIN_DEFAULT		0
160 #define NPCM7XX_FAN_CLK_PRESCALE			255
161 
162 #define NPCM7XX_FAN_CMPA				0
163 #define NPCM7XX_FAN_CMPB				1
164 
165 /* Obtain the fan number */
166 #define NPCM7XX_FAN_INPUT(fan, cmp)		(((fan) << 1) + (cmp))
167 
168 /* fan sample status */
169 #define FAN_DISABLE				0xFF
170 #define FAN_INIT				0x00
171 #define FAN_PREPARE_TO_GET_FIRST_CAPTURE	0x01
172 #define FAN_ENOUGH_SAMPLE			0x02
173 
174 struct npcm7xx_fan_dev {
175 	u8 fan_st_flg;
176 	u8 fan_pls_per_rev;
177 	u16 fan_cnt;
178 	u32 fan_cnt_tmp;
179 };
180 
181 struct npcm7xx_cooling_device {
182 	char name[THERMAL_NAME_LENGTH];
183 	struct npcm7xx_pwm_fan_data *data;
184 	struct thermal_cooling_device *tcdev;
185 	int pwm_port;
186 	u8 *cooling_levels;
187 	u8 max_state;
188 	u8 cur_state;
189 };
190 
191 struct npcm7xx_pwm_fan_data {
192 	void __iomem *pwm_base;
193 	void __iomem *fan_base;
194 	unsigned long pwm_clk_freq;
195 	unsigned long fan_clk_freq;
196 	struct clk *pwm_clk;
197 	struct clk *fan_clk;
198 	struct mutex pwm_lock[NPCM7XX_PWM_MAX_MODULES];
199 	spinlock_t fan_lock[NPCM7XX_FAN_MAX_MODULE];
200 	int fan_irq[NPCM7XX_FAN_MAX_MODULE];
201 	bool pwm_present[NPCM7XX_PWM_MAX_CHN_NUM];
202 	bool fan_present[NPCM7XX_FAN_MAX_CHN_NUM];
203 	u32 input_clk_freq;
204 	struct timer_list fan_timer;
205 	struct npcm7xx_fan_dev fan_dev[NPCM7XX_FAN_MAX_CHN_NUM];
206 	struct npcm7xx_cooling_device *cdev[NPCM7XX_PWM_MAX_CHN_NUM];
207 	u8 fan_select;
208 };
209 
210 static int npcm7xx_pwm_config_set(struct npcm7xx_pwm_fan_data *data,
211 				  int channel, u16 val)
212 {
213 	u32 pwm_ch = (channel % NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE);
214 	u32 module = (channel / NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE);
215 	u32 tmp_buf, ctrl_en_bit, env_bit;
216 
217 	/*
218 	 * Config PWM Comparator register for setting duty cycle
219 	 */
220 	mutex_lock(&data->pwm_lock[module]);
221 
222 	/* write new CMR value  */
223 	iowrite32(val, NPCM7XX_PWM_REG_CMRx(data->pwm_base, module, pwm_ch));
224 	tmp_buf = ioread32(NPCM7XX_PWM_REG_CR(data->pwm_base, module));
225 
226 	switch (pwm_ch) {
227 	case 0:
228 		ctrl_en_bit = NPCM7XX_PWM_CTRL_CH0_EN_BIT;
229 		env_bit = NPCM7XX_PWM_CTRL_CH0_INV_BIT;
230 		break;
231 	case 1:
232 		ctrl_en_bit = NPCM7XX_PWM_CTRL_CH1_EN_BIT;
233 		env_bit = NPCM7XX_PWM_CTRL_CH1_INV_BIT;
234 		break;
235 	case 2:
236 		ctrl_en_bit = NPCM7XX_PWM_CTRL_CH2_EN_BIT;
237 		env_bit = NPCM7XX_PWM_CTRL_CH2_INV_BIT;
238 		break;
239 	case 3:
240 		ctrl_en_bit = NPCM7XX_PWM_CTRL_CH3_EN_BIT;
241 		env_bit = NPCM7XX_PWM_CTRL_CH3_INV_BIT;
242 		break;
243 	default:
244 		mutex_unlock(&data->pwm_lock[module]);
245 		return -ENODEV;
246 	}
247 
248 	if (val == 0) {
249 		/* Disable PWM */
250 		tmp_buf &= ~ctrl_en_bit;
251 		tmp_buf |= env_bit;
252 	} else {
253 		/* Enable PWM */
254 		tmp_buf |= ctrl_en_bit;
255 		tmp_buf &= ~env_bit;
256 	}
257 
258 	iowrite32(tmp_buf, NPCM7XX_PWM_REG_CR(data->pwm_base, module));
259 	mutex_unlock(&data->pwm_lock[module]);
260 
261 	return 0;
262 }
263 
264 static inline void npcm7xx_fan_start_capture(struct npcm7xx_pwm_fan_data *data,
265 					     u8 fan, u8 cmp)
266 {
267 	u8 fan_id;
268 	u8 reg_mode;
269 	u8 reg_int;
270 	unsigned long flags;
271 
272 	fan_id = NPCM7XX_FAN_INPUT(fan, cmp);
273 
274 	/* to check whether any fan tach is enable */
275 	if (data->fan_dev[fan_id].fan_st_flg != FAN_DISABLE) {
276 		/* reset status */
277 		spin_lock_irqsave(&data->fan_lock[fan], flags);
278 
279 		data->fan_dev[fan_id].fan_st_flg = FAN_INIT;
280 		reg_int = ioread8(NPCM7XX_FAN_REG_TIEN(data->fan_base, fan));
281 
282 		/*
283 		 * the interrupt enable bits do not need to be cleared before
284 		 * it sets, the interrupt enable bits are cleared only on reset.
285 		 * the clock unit control register is behaving in the same
286 		 * manner that the interrupt enable register behave.
287 		 */
288 		if (cmp == NPCM7XX_FAN_CMPA) {
289 			/* enable interrupt */
290 			iowrite8(reg_int | (NPCM7XX_FAN_TIEN_TAIEN |
291 					    NPCM7XX_FAN_TIEN_TEIEN),
292 				 NPCM7XX_FAN_REG_TIEN(data->fan_base, fan));
293 
294 			reg_mode = NPCM7XX_FAN_TCKC_CLK1_APB
295 				| ioread8(NPCM7XX_FAN_REG_TCKC(data->fan_base,
296 							       fan));
297 
298 			/* start to Capture */
299 			iowrite8(reg_mode, NPCM7XX_FAN_REG_TCKC(data->fan_base,
300 								fan));
301 		} else {
302 			/* enable interrupt */
303 			iowrite8(reg_int | (NPCM7XX_FAN_TIEN_TBIEN |
304 					    NPCM7XX_FAN_TIEN_TFIEN),
305 				 NPCM7XX_FAN_REG_TIEN(data->fan_base, fan));
306 
307 			reg_mode =
308 				NPCM7XX_FAN_TCKC_CLK2_APB
309 				| ioread8(NPCM7XX_FAN_REG_TCKC(data->fan_base,
310 							       fan));
311 
312 			/* start to Capture */
313 			iowrite8(reg_mode,
314 				 NPCM7XX_FAN_REG_TCKC(data->fan_base, fan));
315 		}
316 
317 		spin_unlock_irqrestore(&data->fan_lock[fan], flags);
318 	}
319 }
320 
321 /*
322  * Enable a background timer to poll fan tach value, (200ms * 4)
323  * to polling all fan
324  */
325 static void npcm7xx_fan_polling(struct timer_list *t)
326 {
327 	struct npcm7xx_pwm_fan_data *data;
328 	int i;
329 
330 	data = from_timer(data, t, fan_timer);
331 
332 	/*
333 	 * Polling two module per one round,
334 	 * FAN01 & FAN89 / FAN23 & FAN1011 / FAN45 & FAN1213 / FAN67 & FAN1415
335 	 */
336 	for (i = data->fan_select; i < NPCM7XX_FAN_MAX_MODULE;
337 	      i = i + 4) {
338 		/* clear the flag and reset the counter (TCNT) */
339 		iowrite8(NPCM7XX_FAN_TICLR_CLEAR_ALL,
340 			 NPCM7XX_FAN_REG_TICLR(data->fan_base, i));
341 
342 		if (data->fan_present[i * 2]) {
343 			iowrite16(NPCM7XX_FAN_TCNT,
344 				  NPCM7XX_FAN_REG_TCNT1(data->fan_base, i));
345 			npcm7xx_fan_start_capture(data, i, NPCM7XX_FAN_CMPA);
346 		}
347 		if (data->fan_present[(i * 2) + 1]) {
348 			iowrite16(NPCM7XX_FAN_TCNT,
349 				  NPCM7XX_FAN_REG_TCNT2(data->fan_base, i));
350 			npcm7xx_fan_start_capture(data, i, NPCM7XX_FAN_CMPB);
351 		}
352 	}
353 
354 	data->fan_select++;
355 	data->fan_select &= 0x3;
356 
357 	/* reset the timer interval */
358 	data->fan_timer.expires = jiffies +
359 		msecs_to_jiffies(NPCM7XX_FAN_POLL_TIMER_200MS);
360 	add_timer(&data->fan_timer);
361 }
362 
363 static inline void npcm7xx_fan_compute(struct npcm7xx_pwm_fan_data *data,
364 				       u8 fan, u8 cmp, u8 fan_id, u8 flag_int,
365 				       u8 flag_mode, u8 flag_clear)
366 {
367 	u8  reg_int;
368 	u8  reg_mode;
369 	u16 fan_cap;
370 
371 	if (cmp == NPCM7XX_FAN_CMPA)
372 		fan_cap = ioread16(NPCM7XX_FAN_REG_TCRA(data->fan_base, fan));
373 	else
374 		fan_cap = ioread16(NPCM7XX_FAN_REG_TCRB(data->fan_base, fan));
375 
376 	/* clear capature flag, H/W will auto reset the NPCM7XX_FAN_TCNTx */
377 	iowrite8(flag_clear, NPCM7XX_FAN_REG_TICLR(data->fan_base, fan));
378 
379 	if (data->fan_dev[fan_id].fan_st_flg == FAN_INIT) {
380 		/* First capture, drop it */
381 		data->fan_dev[fan_id].fan_st_flg =
382 			FAN_PREPARE_TO_GET_FIRST_CAPTURE;
383 
384 		/* reset counter */
385 		data->fan_dev[fan_id].fan_cnt_tmp = 0;
386 	} else if (data->fan_dev[fan_id].fan_st_flg < FAN_ENOUGH_SAMPLE) {
387 		/*
388 		 * collect the enough sample,
389 		 * (ex: 2 pulse fan need to get 2 sample)
390 		 */
391 		data->fan_dev[fan_id].fan_cnt_tmp +=
392 			(NPCM7XX_FAN_TCNT - fan_cap);
393 
394 		data->fan_dev[fan_id].fan_st_flg++;
395 	} else {
396 		/* get enough sample or fan disable */
397 		if (data->fan_dev[fan_id].fan_st_flg == FAN_ENOUGH_SAMPLE) {
398 			data->fan_dev[fan_id].fan_cnt_tmp +=
399 				(NPCM7XX_FAN_TCNT - fan_cap);
400 
401 			/* compute finial average cnt per pulse */
402 			data->fan_dev[fan_id].fan_cnt =
403 				data->fan_dev[fan_id].fan_cnt_tmp /
404 				FAN_ENOUGH_SAMPLE;
405 
406 			data->fan_dev[fan_id].fan_st_flg = FAN_INIT;
407 		}
408 
409 		reg_int =  ioread8(NPCM7XX_FAN_REG_TIEN(data->fan_base, fan));
410 
411 		/* disable interrupt */
412 		iowrite8((reg_int & ~flag_int),
413 			 NPCM7XX_FAN_REG_TIEN(data->fan_base, fan));
414 		reg_mode =  ioread8(NPCM7XX_FAN_REG_TCKC(data->fan_base, fan));
415 
416 		/* stop capturing */
417 		iowrite8((reg_mode & ~flag_mode),
418 			 NPCM7XX_FAN_REG_TCKC(data->fan_base, fan));
419 	}
420 }
421 
422 static inline void npcm7xx_check_cmp(struct npcm7xx_pwm_fan_data *data,
423 				     u8 fan, u8 cmp, u8 flag)
424 {
425 	u8 reg_int;
426 	u8 reg_mode;
427 	u8 flag_timeout;
428 	u8 flag_cap;
429 	u8 flag_clear;
430 	u8 flag_int;
431 	u8 flag_mode;
432 	u8 fan_id;
433 
434 	fan_id = NPCM7XX_FAN_INPUT(fan, cmp);
435 
436 	if (cmp == NPCM7XX_FAN_CMPA) {
437 		flag_cap = NPCM7XX_FAN_TICTRL_TAPND;
438 		flag_timeout = NPCM7XX_FAN_TICTRL_TEPND;
439 		flag_int = NPCM7XX_FAN_TIEN_TAIEN | NPCM7XX_FAN_TIEN_TEIEN;
440 		flag_mode = NPCM7XX_FAN_TCKC_CLK1_APB;
441 		flag_clear = NPCM7XX_FAN_TICLR_TACLR | NPCM7XX_FAN_TICLR_TECLR;
442 	} else {
443 		flag_cap = NPCM7XX_FAN_TICTRL_TBPND;
444 		flag_timeout = NPCM7XX_FAN_TICTRL_TFPND;
445 		flag_int = NPCM7XX_FAN_TIEN_TBIEN | NPCM7XX_FAN_TIEN_TFIEN;
446 		flag_mode = NPCM7XX_FAN_TCKC_CLK2_APB;
447 		flag_clear = NPCM7XX_FAN_TICLR_TBCLR | NPCM7XX_FAN_TICLR_TFCLR;
448 	}
449 
450 	if (flag & flag_timeout) {
451 		reg_int =  ioread8(NPCM7XX_FAN_REG_TIEN(data->fan_base, fan));
452 
453 		/* disable interrupt */
454 		iowrite8((reg_int & ~flag_int),
455 			 NPCM7XX_FAN_REG_TIEN(data->fan_base, fan));
456 
457 		/* clear interrupt flag */
458 		iowrite8(flag_clear,
459 			 NPCM7XX_FAN_REG_TICLR(data->fan_base, fan));
460 
461 		reg_mode =  ioread8(NPCM7XX_FAN_REG_TCKC(data->fan_base, fan));
462 
463 		/* stop capturing */
464 		iowrite8((reg_mode & ~flag_mode),
465 			 NPCM7XX_FAN_REG_TCKC(data->fan_base, fan));
466 
467 		/*
468 		 *  If timeout occurs (NPCM7XX_FAN_TIMEOUT), the fan doesn't
469 		 *  connect or speed is lower than 10.6Hz (320RPM/pulse2).
470 		 *  In these situation, the RPM output should be zero.
471 		 */
472 		data->fan_dev[fan_id].fan_cnt = 0;
473 	} else {
474 	    /* input capture is occurred */
475 		if (flag & flag_cap)
476 			npcm7xx_fan_compute(data, fan, cmp, fan_id, flag_int,
477 					    flag_mode, flag_clear);
478 	}
479 }
480 
481 static irqreturn_t npcm7xx_fan_isr(int irq, void *dev_id)
482 {
483 	struct npcm7xx_pwm_fan_data *data = dev_id;
484 	unsigned long flags;
485 	int module;
486 	u8 flag;
487 
488 	module = irq - data->fan_irq[0];
489 	spin_lock_irqsave(&data->fan_lock[module], flags);
490 
491 	flag = ioread8(NPCM7XX_FAN_REG_TICTRL(data->fan_base, module));
492 	if (flag > 0) {
493 		npcm7xx_check_cmp(data, module, NPCM7XX_FAN_CMPA, flag);
494 		npcm7xx_check_cmp(data, module, NPCM7XX_FAN_CMPB, flag);
495 		spin_unlock_irqrestore(&data->fan_lock[module], flags);
496 		return IRQ_HANDLED;
497 	}
498 
499 	spin_unlock_irqrestore(&data->fan_lock[module], flags);
500 
501 	return IRQ_NONE;
502 }
503 
504 static int npcm7xx_read_pwm(struct device *dev, u32 attr, int channel,
505 			    long *val)
506 {
507 	struct npcm7xx_pwm_fan_data *data = dev_get_drvdata(dev);
508 	u32 pmw_ch = (channel % NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE);
509 	u32 module = (channel / NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE);
510 
511 	switch (attr) {
512 	case hwmon_pwm_input:
513 		*val = ioread32
514 			(NPCM7XX_PWM_REG_CMRx(data->pwm_base, module, pmw_ch));
515 		return 0;
516 	default:
517 		return -EOPNOTSUPP;
518 	}
519 }
520 
521 static int npcm7xx_write_pwm(struct device *dev, u32 attr, int channel,
522 			     long val)
523 {
524 	struct npcm7xx_pwm_fan_data *data = dev_get_drvdata(dev);
525 	int err;
526 
527 	switch (attr) {
528 	case hwmon_pwm_input:
529 		if (val < 0 || val > NPCM7XX_PWM_CMR_MAX)
530 			return -EINVAL;
531 		err = npcm7xx_pwm_config_set(data, channel, (u16)val);
532 		break;
533 	default:
534 		err = -EOPNOTSUPP;
535 		break;
536 	}
537 
538 	return err;
539 }
540 
541 static umode_t npcm7xx_pwm_is_visible(const void *_data, u32 attr, int channel)
542 {
543 	const struct npcm7xx_pwm_fan_data *data = _data;
544 
545 	if (!data->pwm_present[channel])
546 		return 0;
547 
548 	switch (attr) {
549 	case hwmon_pwm_input:
550 		return 0644;
551 	default:
552 		return 0;
553 	}
554 }
555 
556 static int npcm7xx_read_fan(struct device *dev, u32 attr, int channel,
557 			    long *val)
558 {
559 	struct npcm7xx_pwm_fan_data *data = dev_get_drvdata(dev);
560 
561 	switch (attr) {
562 	case hwmon_fan_input:
563 		*val = 0;
564 		if (data->fan_dev[channel].fan_cnt <= 0)
565 			return data->fan_dev[channel].fan_cnt;
566 
567 		/* Convert the raw reading to RPM */
568 		if (data->fan_dev[channel].fan_cnt > 0 &&
569 		    data->fan_dev[channel].fan_pls_per_rev > 0)
570 			*val = ((data->input_clk_freq * 60) /
571 				(data->fan_dev[channel].fan_cnt *
572 				 data->fan_dev[channel].fan_pls_per_rev));
573 		return 0;
574 	default:
575 		return -EOPNOTSUPP;
576 	}
577 }
578 
579 static umode_t npcm7xx_fan_is_visible(const void *_data, u32 attr, int channel)
580 {
581 	const struct npcm7xx_pwm_fan_data *data = _data;
582 
583 	if (!data->fan_present[channel])
584 		return 0;
585 
586 	switch (attr) {
587 	case hwmon_fan_input:
588 		return 0444;
589 	default:
590 		return 0;
591 	}
592 }
593 
594 static int npcm7xx_read(struct device *dev, enum hwmon_sensor_types type,
595 			u32 attr, int channel, long *val)
596 {
597 	switch (type) {
598 	case hwmon_pwm:
599 		return npcm7xx_read_pwm(dev, attr, channel, val);
600 	case hwmon_fan:
601 		return npcm7xx_read_fan(dev, attr, channel, val);
602 	default:
603 		return -EOPNOTSUPP;
604 	}
605 }
606 
607 static int npcm7xx_write(struct device *dev, enum hwmon_sensor_types type,
608 			 u32 attr, int channel, long val)
609 {
610 	switch (type) {
611 	case hwmon_pwm:
612 		return npcm7xx_write_pwm(dev, attr, channel, val);
613 	default:
614 		return -EOPNOTSUPP;
615 	}
616 }
617 
618 static umode_t npcm7xx_is_visible(const void *data,
619 				  enum hwmon_sensor_types type,
620 				  u32 attr, int channel)
621 {
622 	switch (type) {
623 	case hwmon_pwm:
624 		return npcm7xx_pwm_is_visible(data, attr, channel);
625 	case hwmon_fan:
626 		return npcm7xx_fan_is_visible(data, attr, channel);
627 	default:
628 		return 0;
629 	}
630 }
631 
632 static const struct hwmon_channel_info * const npcm7xx_info[] = {
633 	HWMON_CHANNEL_INFO(pwm,
634 			   HWMON_PWM_INPUT,
635 			   HWMON_PWM_INPUT,
636 			   HWMON_PWM_INPUT,
637 			   HWMON_PWM_INPUT,
638 			   HWMON_PWM_INPUT,
639 			   HWMON_PWM_INPUT,
640 			   HWMON_PWM_INPUT,
641 			   HWMON_PWM_INPUT),
642 	HWMON_CHANNEL_INFO(fan,
643 			   HWMON_F_INPUT,
644 			   HWMON_F_INPUT,
645 			   HWMON_F_INPUT,
646 			   HWMON_F_INPUT,
647 			   HWMON_F_INPUT,
648 			   HWMON_F_INPUT,
649 			   HWMON_F_INPUT,
650 			   HWMON_F_INPUT,
651 			   HWMON_F_INPUT,
652 			   HWMON_F_INPUT,
653 			   HWMON_F_INPUT,
654 			   HWMON_F_INPUT,
655 			   HWMON_F_INPUT,
656 			   HWMON_F_INPUT,
657 			   HWMON_F_INPUT,
658 			   HWMON_F_INPUT),
659 	NULL
660 };
661 
662 static const struct hwmon_ops npcm7xx_hwmon_ops = {
663 	.is_visible = npcm7xx_is_visible,
664 	.read = npcm7xx_read,
665 	.write = npcm7xx_write,
666 };
667 
668 static const struct hwmon_chip_info npcm7xx_chip_info = {
669 	.ops = &npcm7xx_hwmon_ops,
670 	.info = npcm7xx_info,
671 };
672 
673 static u32 npcm7xx_pwm_init(struct npcm7xx_pwm_fan_data *data)
674 {
675 	int m, ch;
676 	u32 prescale_val, output_freq;
677 
678 	data->pwm_clk_freq = clk_get_rate(data->pwm_clk);
679 
680 	/* Adjust NPCM7xx PWMs output frequency to ~25Khz */
681 	output_freq = data->pwm_clk_freq / PWN_CNT_DEFAULT;
682 	prescale_val = DIV_ROUND_CLOSEST(output_freq, PWM_OUTPUT_FREQ_25KHZ);
683 
684 	/* If prescale_val = 0, then the prescale output clock is stopped */
685 	if (prescale_val < MIN_PRESCALE1)
686 		prescale_val = MIN_PRESCALE1;
687 	/*
688 	 * prescale_val need to decrement in one because in the PWM Prescale
689 	 * register the Prescale value increment by one
690 	 */
691 	prescale_val--;
692 
693 	/* Setting PWM Prescale Register value register to both modules */
694 	prescale_val |= (prescale_val << NPCM7XX_PWM_PRESCALE_SHIFT_CH01);
695 
696 	for (m = 0; m < NPCM7XX_PWM_MAX_MODULES  ; m++) {
697 		iowrite32(prescale_val, NPCM7XX_PWM_REG_PR(data->pwm_base, m));
698 		iowrite32(NPCM7XX_PWM_PRESCALE2_DEFAULT,
699 			  NPCM7XX_PWM_REG_CSR(data->pwm_base, m));
700 		iowrite32(NPCM7XX_PWM_CTRL_MODE_DEFAULT,
701 			  NPCM7XX_PWM_REG_CR(data->pwm_base, m));
702 
703 		for (ch = 0; ch < NPCM7XX_PWM_MAX_CHN_NUM_IN_A_MODULE; ch++) {
704 			iowrite32(NPCM7XX_PWM_COUNTER_DEFAULT_NUM,
705 				  NPCM7XX_PWM_REG_CNRx(data->pwm_base, m, ch));
706 		}
707 	}
708 
709 	return output_freq / ((prescale_val & 0xf) + 1);
710 }
711 
712 static void npcm7xx_fan_init(struct npcm7xx_pwm_fan_data *data)
713 {
714 	int md;
715 	int ch;
716 	int i;
717 	u32 apb_clk_freq;
718 
719 	for (md = 0; md < NPCM7XX_FAN_MAX_MODULE; md++) {
720 		/* stop FAN0~7 clock */
721 		iowrite8(NPCM7XX_FAN_TCKC_CLKX_NONE,
722 			 NPCM7XX_FAN_REG_TCKC(data->fan_base, md));
723 
724 		/* disable all interrupt */
725 		iowrite8(0x00, NPCM7XX_FAN_REG_TIEN(data->fan_base, md));
726 
727 		/* clear all interrupt */
728 		iowrite8(NPCM7XX_FAN_TICLR_CLEAR_ALL,
729 			 NPCM7XX_FAN_REG_TICLR(data->fan_base, md));
730 
731 		/* set FAN0~7 clock prescaler */
732 		iowrite8(NPCM7XX_FAN_CLK_PRESCALE,
733 			 NPCM7XX_FAN_REG_TPRSC(data->fan_base, md));
734 
735 		/* set FAN0~7 mode (high-to-low transition) */
736 		iowrite8((NPCM7XX_FAN_TMCTRL_MODE_5 | NPCM7XX_FAN_TMCTRL_TBEN |
737 			  NPCM7XX_FAN_TMCTRL_TAEN),
738 			 NPCM7XX_FAN_REG_TMCTRL(data->fan_base, md));
739 
740 		/* set FAN0~7 Initial Count/Cap */
741 		iowrite16(NPCM7XX_FAN_TCNT,
742 			  NPCM7XX_FAN_REG_TCNT1(data->fan_base, md));
743 		iowrite16(NPCM7XX_FAN_TCNT,
744 			  NPCM7XX_FAN_REG_TCNT2(data->fan_base, md));
745 
746 		/* set FAN0~7 compare (equal to count) */
747 		iowrite8((NPCM7XX_FAN_TCPCFG_EQAEN | NPCM7XX_FAN_TCPCFG_EQBEN),
748 			 NPCM7XX_FAN_REG_TCPCFG(data->fan_base, md));
749 
750 		/* set FAN0~7 compare value */
751 		iowrite16(NPCM7XX_FAN_TCPA,
752 			  NPCM7XX_FAN_REG_TCPA(data->fan_base, md));
753 		iowrite16(NPCM7XX_FAN_TCPB,
754 			  NPCM7XX_FAN_REG_TCPB(data->fan_base, md));
755 
756 		/* set FAN0~7 fan input FANIN 0~15 */
757 		iowrite8(NPCM7XX_FAN_TINASEL_FANIN_DEFAULT,
758 			 NPCM7XX_FAN_REG_TINASEL(data->fan_base, md));
759 		iowrite8(NPCM7XX_FAN_TINASEL_FANIN_DEFAULT,
760 			 NPCM7XX_FAN_REG_TINBSEL(data->fan_base, md));
761 
762 		for (i = 0; i < NPCM7XX_FAN_MAX_CHN_NUM_IN_A_MODULE; i++) {
763 			ch = md * NPCM7XX_FAN_MAX_CHN_NUM_IN_A_MODULE + i;
764 			data->fan_dev[ch].fan_st_flg = FAN_DISABLE;
765 			data->fan_dev[ch].fan_pls_per_rev =
766 				NPCM7XX_FAN_DEFAULT_PULSE_PER_REVOLUTION;
767 			data->fan_dev[ch].fan_cnt = 0;
768 		}
769 	}
770 
771 	apb_clk_freq = clk_get_rate(data->fan_clk);
772 
773 	/* Fan tach input clock = APB clock / prescalar, default is 255. */
774 	data->input_clk_freq = apb_clk_freq / (NPCM7XX_FAN_CLK_PRESCALE + 1);
775 }
776 
777 static int
778 npcm7xx_pwm_cz_get_max_state(struct thermal_cooling_device *tcdev,
779 			     unsigned long *state)
780 {
781 	struct npcm7xx_cooling_device *cdev = tcdev->devdata;
782 
783 	*state = cdev->max_state;
784 
785 	return 0;
786 }
787 
788 static int
789 npcm7xx_pwm_cz_get_cur_state(struct thermal_cooling_device *tcdev,
790 			     unsigned long *state)
791 {
792 	struct npcm7xx_cooling_device *cdev = tcdev->devdata;
793 
794 	*state = cdev->cur_state;
795 
796 	return 0;
797 }
798 
799 static int
800 npcm7xx_pwm_cz_set_cur_state(struct thermal_cooling_device *tcdev,
801 			     unsigned long state)
802 {
803 	struct npcm7xx_cooling_device *cdev = tcdev->devdata;
804 	int ret;
805 
806 	if (state > cdev->max_state)
807 		return -EINVAL;
808 
809 	cdev->cur_state = state;
810 	ret = npcm7xx_pwm_config_set(cdev->data, cdev->pwm_port,
811 				     cdev->cooling_levels[cdev->cur_state]);
812 
813 	return ret;
814 }
815 
816 static const struct thermal_cooling_device_ops npcm7xx_pwm_cool_ops = {
817 	.get_max_state = npcm7xx_pwm_cz_get_max_state,
818 	.get_cur_state = npcm7xx_pwm_cz_get_cur_state,
819 	.set_cur_state = npcm7xx_pwm_cz_set_cur_state,
820 };
821 
822 static int npcm7xx_create_pwm_cooling(struct device *dev,
823 				      struct device_node *child,
824 				      struct npcm7xx_pwm_fan_data *data,
825 				      u32 pwm_port, u8 num_levels)
826 {
827 	int ret;
828 	struct npcm7xx_cooling_device *cdev;
829 
830 	cdev = devm_kzalloc(dev, sizeof(*cdev), GFP_KERNEL);
831 	if (!cdev)
832 		return -ENOMEM;
833 
834 	cdev->cooling_levels = devm_kzalloc(dev, num_levels, GFP_KERNEL);
835 	if (!cdev->cooling_levels)
836 		return -ENOMEM;
837 
838 	cdev->max_state = num_levels - 1;
839 	ret = of_property_read_u8_array(child, "cooling-levels",
840 					cdev->cooling_levels,
841 					num_levels);
842 	if (ret) {
843 		dev_err(dev, "Property 'cooling-levels' cannot be read.\n");
844 		return ret;
845 	}
846 	snprintf(cdev->name, THERMAL_NAME_LENGTH, "%pOFn%d", child,
847 		 pwm_port);
848 
849 	cdev->tcdev = devm_thermal_of_cooling_device_register(dev, child,
850 				cdev->name, cdev, &npcm7xx_pwm_cool_ops);
851 	if (IS_ERR(cdev->tcdev))
852 		return PTR_ERR(cdev->tcdev);
853 
854 	cdev->data = data;
855 	cdev->pwm_port = pwm_port;
856 
857 	data->cdev[pwm_port] = cdev;
858 
859 	return 0;
860 }
861 
862 static int npcm7xx_en_pwm_fan(struct device *dev,
863 			      struct device_node *child,
864 			      struct npcm7xx_pwm_fan_data *data)
865 {
866 	u8 *fan_ch;
867 	u32 pwm_port;
868 	int ret, fan_cnt;
869 	u8 index, ch;
870 
871 	ret = of_property_read_u32(child, "reg", &pwm_port);
872 	if (ret)
873 		return ret;
874 
875 	data->pwm_present[pwm_port] = true;
876 	ret = npcm7xx_pwm_config_set(data, pwm_port,
877 				     NPCM7XX_PWM_CMR_DEFAULT_NUM);
878 
879 	ret = of_property_count_u8_elems(child, "cooling-levels");
880 	if (ret > 0) {
881 		ret = npcm7xx_create_pwm_cooling(dev, child, data, pwm_port,
882 						 ret);
883 		if (ret)
884 			return ret;
885 	}
886 
887 	fan_cnt = of_property_count_u8_elems(child, "fan-tach-ch");
888 	if (fan_cnt < 1)
889 		return -EINVAL;
890 
891 	fan_ch = devm_kcalloc(dev, fan_cnt, sizeof(*fan_ch), GFP_KERNEL);
892 	if (!fan_ch)
893 		return -ENOMEM;
894 
895 	ret = of_property_read_u8_array(child, "fan-tach-ch", fan_ch, fan_cnt);
896 	if (ret)
897 		return ret;
898 
899 	for (ch = 0; ch < fan_cnt; ch++) {
900 		index = fan_ch[ch];
901 		data->fan_present[index] = true;
902 		data->fan_dev[index].fan_st_flg = FAN_INIT;
903 	}
904 
905 	return 0;
906 }
907 
908 static int npcm7xx_pwm_fan_probe(struct platform_device *pdev)
909 {
910 	struct device *dev = &pdev->dev;
911 	struct device_node *np, *child;
912 	struct npcm7xx_pwm_fan_data *data;
913 	struct resource *res;
914 	struct device *hwmon;
915 	char name[20];
916 	int ret, cnt;
917 	u32 output_freq;
918 	u32 i;
919 
920 	np = dev->of_node;
921 
922 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
923 	if (!data)
924 		return -ENOMEM;
925 
926 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm");
927 	if (!res) {
928 		dev_err(dev, "pwm resource not found\n");
929 		return -ENODEV;
930 	}
931 
932 	data->pwm_base = devm_ioremap_resource(dev, res);
933 	dev_dbg(dev, "pwm base resource is %pR\n", res);
934 	if (IS_ERR(data->pwm_base))
935 		return PTR_ERR(data->pwm_base);
936 
937 	data->pwm_clk = devm_clk_get(dev, "pwm");
938 	if (IS_ERR(data->pwm_clk)) {
939 		dev_err(dev, "couldn't get pwm clock\n");
940 		return PTR_ERR(data->pwm_clk);
941 	}
942 
943 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fan");
944 	if (!res) {
945 		dev_err(dev, "fan resource not found\n");
946 		return -ENODEV;
947 	}
948 
949 	data->fan_base = devm_ioremap_resource(dev, res);
950 	dev_dbg(dev, "fan base resource is %pR\n", res);
951 	if (IS_ERR(data->fan_base))
952 		return PTR_ERR(data->fan_base);
953 
954 	data->fan_clk = devm_clk_get(dev, "fan");
955 	if (IS_ERR(data->fan_clk)) {
956 		dev_err(dev, "couldn't get fan clock\n");
957 		return PTR_ERR(data->fan_clk);
958 	}
959 
960 	output_freq = npcm7xx_pwm_init(data);
961 	npcm7xx_fan_init(data);
962 
963 	for (cnt = 0; cnt < NPCM7XX_PWM_MAX_MODULES  ; cnt++)
964 		mutex_init(&data->pwm_lock[cnt]);
965 
966 	for (i = 0; i < NPCM7XX_FAN_MAX_MODULE; i++) {
967 		spin_lock_init(&data->fan_lock[i]);
968 
969 		data->fan_irq[i] = platform_get_irq(pdev, i);
970 		if (data->fan_irq[i] < 0)
971 			return data->fan_irq[i];
972 
973 		sprintf(name, "NPCM7XX-FAN-MD%d", i);
974 		ret = devm_request_irq(dev, data->fan_irq[i], npcm7xx_fan_isr,
975 				       0, name, (void *)data);
976 		if (ret) {
977 			dev_err(dev, "register IRQ fan%d failed\n", i);
978 			return ret;
979 		}
980 	}
981 
982 	for_each_child_of_node(np, child) {
983 		ret = npcm7xx_en_pwm_fan(dev, child, data);
984 		if (ret) {
985 			dev_err(dev, "enable pwm and fan failed\n");
986 			of_node_put(child);
987 			return ret;
988 		}
989 	}
990 
991 	hwmon = devm_hwmon_device_register_with_info(dev, "npcm7xx_pwm_fan",
992 						     data, &npcm7xx_chip_info,
993 						     NULL);
994 	if (IS_ERR(hwmon)) {
995 		dev_err(dev, "unable to register hwmon device\n");
996 		return PTR_ERR(hwmon);
997 	}
998 
999 	for (i = 0; i < NPCM7XX_FAN_MAX_CHN_NUM; i++) {
1000 		if (data->fan_present[i]) {
1001 			/* fan timer initialization */
1002 			data->fan_timer.expires = jiffies +
1003 				msecs_to_jiffies(NPCM7XX_FAN_POLL_TIMER_200MS);
1004 			timer_setup(&data->fan_timer,
1005 				    npcm7xx_fan_polling, 0);
1006 			add_timer(&data->fan_timer);
1007 			break;
1008 		}
1009 	}
1010 
1011 	pr_info("NPCM7XX PWM-FAN Driver probed, output Freq %dHz[PWM], input Freq %dHz[FAN]\n",
1012 		output_freq, data->input_clk_freq);
1013 
1014 	return 0;
1015 }
1016 
1017 static const struct of_device_id of_pwm_fan_match_table[] = {
1018 	{ .compatible = "nuvoton,npcm750-pwm-fan", },
1019 	{},
1020 };
1021 MODULE_DEVICE_TABLE(of, of_pwm_fan_match_table);
1022 
1023 static struct platform_driver npcm7xx_pwm_fan_driver = {
1024 	.probe		= npcm7xx_pwm_fan_probe,
1025 	.driver		= {
1026 		.name	= "npcm7xx_pwm_fan",
1027 		.of_match_table = of_pwm_fan_match_table,
1028 	},
1029 };
1030 
1031 module_platform_driver(npcm7xx_pwm_fan_driver);
1032 
1033 MODULE_DESCRIPTION("Nuvoton NPCM7XX PWM and Fan Tacho driver");
1034 MODULE_AUTHOR("Tomer Maimon <tomer.maimon@nuvoton.com>");
1035 MODULE_LICENSE("GPL v2");
1036