1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * nct6775 - Platform driver for the hardware monitoring
4  *	     functionality of Nuvoton NCT677x Super-I/O chips
5  *
6  * Copyright (C) 2012  Guenter Roeck <linux@roeck-us.net>
7  */
8 
9 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
10 
11 #include <linux/acpi.h>
12 #include <linux/dmi.h>
13 #include <linux/hwmon-sysfs.h>
14 #include <linux/hwmon-vid.h>
15 #include <linux/init.h>
16 #include <linux/io.h>
17 #include <linux/module.h>
18 #include <linux/platform_device.h>
19 #include <linux/regmap.h>
20 #include <linux/wmi.h>
21 
22 #include "nct6775.h"
23 
24 enum sensor_access { access_direct, access_asuswmi };
25 
26 static const char * const nct6775_sio_names[] __initconst = {
27 	"NCT6106D",
28 	"NCT6116D",
29 	"NCT6775F",
30 	"NCT6776D/F",
31 	"NCT6779D",
32 	"NCT6791D",
33 	"NCT6792D",
34 	"NCT6793D",
35 	"NCT6795D",
36 	"NCT6796D",
37 	"NCT6797D",
38 	"NCT6798D",
39 };
40 
41 static unsigned short force_id;
42 module_param(force_id, ushort, 0);
43 MODULE_PARM_DESC(force_id, "Override the detected device ID");
44 
45 static unsigned short fan_debounce;
46 module_param(fan_debounce, ushort, 0);
47 MODULE_PARM_DESC(fan_debounce, "Enable debouncing for fan RPM signal");
48 
49 #define DRVNAME "nct6775"
50 
51 #define NCT6775_PORT_CHIPID	0x58
52 
53 /*
54  * ISA constants
55  */
56 
57 #define IOREGION_ALIGNMENT	(~7)
58 #define IOREGION_OFFSET		5
59 #define IOREGION_LENGTH		2
60 #define ADDR_REG_OFFSET		0
61 #define DATA_REG_OFFSET		1
62 
63 /*
64  * Super-I/O constants and functions
65  */
66 
67 #define NCT6775_LD_ACPI		0x0a
68 #define NCT6775_LD_HWM		0x0b
69 #define NCT6775_LD_VID		0x0d
70 #define NCT6775_LD_12		0x12
71 
72 #define SIO_REG_LDSEL		0x07	/* Logical device select */
73 #define SIO_REG_DEVID		0x20	/* Device ID (2 bytes) */
74 #define SIO_REG_ENABLE		0x30	/* Logical device enable */
75 #define SIO_REG_ADDR		0x60	/* Logical device address (2 bytes) */
76 
77 #define SIO_NCT6106_ID		0xc450
78 #define SIO_NCT6116_ID		0xd280
79 #define SIO_NCT6775_ID		0xb470
80 #define SIO_NCT6776_ID		0xc330
81 #define SIO_NCT6779_ID		0xc560
82 #define SIO_NCT6791_ID		0xc800
83 #define SIO_NCT6792_ID		0xc910
84 #define SIO_NCT6793_ID		0xd120
85 #define SIO_NCT6795_ID		0xd350
86 #define SIO_NCT6796_ID		0xd420
87 #define SIO_NCT6797_ID		0xd450
88 #define SIO_NCT6798_ID		0xd428
89 #define SIO_ID_MASK		0xFFF8
90 
91 /*
92  * Control registers
93  */
94 #define NCT6775_REG_CR_FAN_DEBOUNCE	0xf0
95 
96 struct nct6775_sio_data {
97 	int sioreg;
98 	int ld;
99 	enum kinds kind;
100 	enum sensor_access access;
101 
102 	/* superio_() callbacks  */
103 	void (*sio_outb)(struct nct6775_sio_data *sio_data, int reg, int val);
104 	int (*sio_inb)(struct nct6775_sio_data *sio_data, int reg);
105 	void (*sio_select)(struct nct6775_sio_data *sio_data, int ld);
106 	int (*sio_enter)(struct nct6775_sio_data *sio_data);
107 	void (*sio_exit)(struct nct6775_sio_data *sio_data);
108 };
109 
110 #define ASUSWMI_MONITORING_GUID		"466747A0-70EC-11DE-8A39-0800200C9A66"
111 #define ASUSWMI_METHODID_RSIO		0x5253494F
112 #define ASUSWMI_METHODID_WSIO		0x5753494F
113 #define ASUSWMI_METHODID_RHWM		0x5248574D
114 #define ASUSWMI_METHODID_WHWM		0x5748574D
115 #define ASUSWMI_UNSUPPORTED_METHOD	0xFFFFFFFE
116 
117 static int nct6775_asuswmi_evaluate_method(u32 method_id, u8 bank, u8 reg, u8 val, u32 *retval)
118 {
119 #if IS_ENABLED(CONFIG_ACPI_WMI)
120 	u32 args = bank | (reg << 8) | (val << 16);
121 	struct acpi_buffer input = { (acpi_size) sizeof(args), &args };
122 	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
123 	acpi_status status;
124 	union acpi_object *obj;
125 	u32 tmp = ASUSWMI_UNSUPPORTED_METHOD;
126 
127 	status = wmi_evaluate_method(ASUSWMI_MONITORING_GUID, 0,
128 				     method_id, &input, &output);
129 
130 	if (ACPI_FAILURE(status))
131 		return -EIO;
132 
133 	obj = output.pointer;
134 	if (obj && obj->type == ACPI_TYPE_INTEGER)
135 		tmp = obj->integer.value;
136 
137 	if (retval)
138 		*retval = tmp;
139 
140 	kfree(obj);
141 
142 	if (tmp == ASUSWMI_UNSUPPORTED_METHOD)
143 		return -ENODEV;
144 	return 0;
145 #else
146 	return -EOPNOTSUPP;
147 #endif
148 }
149 
150 static inline int nct6775_asuswmi_write(u8 bank, u8 reg, u8 val)
151 {
152 	return nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WHWM, bank,
153 					      reg, val, NULL);
154 }
155 
156 static inline int nct6775_asuswmi_read(u8 bank, u8 reg, u8 *val)
157 {
158 	u32 ret, tmp = 0;
159 
160 	ret = nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RHWM, bank,
161 					      reg, 0, &tmp);
162 	*val = tmp;
163 	return ret;
164 }
165 
166 static int superio_wmi_inb(struct nct6775_sio_data *sio_data, int reg)
167 {
168 	int tmp = 0;
169 
170 	nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_RSIO, sio_data->ld,
171 					reg, 0, &tmp);
172 	return tmp;
173 }
174 
175 static void superio_wmi_outb(struct nct6775_sio_data *sio_data, int reg, int val)
176 {
177 	nct6775_asuswmi_evaluate_method(ASUSWMI_METHODID_WSIO, sio_data->ld,
178 					reg, val, NULL);
179 }
180 
181 static void superio_wmi_select(struct nct6775_sio_data *sio_data, int ld)
182 {
183 	sio_data->ld = ld;
184 }
185 
186 static int superio_wmi_enter(struct nct6775_sio_data *sio_data)
187 {
188 	return 0;
189 }
190 
191 static void superio_wmi_exit(struct nct6775_sio_data *sio_data)
192 {
193 }
194 
195 static void superio_outb(struct nct6775_sio_data *sio_data, int reg, int val)
196 {
197 	int ioreg = sio_data->sioreg;
198 
199 	outb(reg, ioreg);
200 	outb(val, ioreg + 1);
201 }
202 
203 static int superio_inb(struct nct6775_sio_data *sio_data, int reg)
204 {
205 	int ioreg = sio_data->sioreg;
206 
207 	outb(reg, ioreg);
208 	return inb(ioreg + 1);
209 }
210 
211 static void superio_select(struct nct6775_sio_data *sio_data, int ld)
212 {
213 	int ioreg = sio_data->sioreg;
214 
215 	outb(SIO_REG_LDSEL, ioreg);
216 	outb(ld, ioreg + 1);
217 }
218 
219 static int superio_enter(struct nct6775_sio_data *sio_data)
220 {
221 	int ioreg = sio_data->sioreg;
222 
223 	/*
224 	 * Try to reserve <ioreg> and <ioreg + 1> for exclusive access.
225 	 */
226 	if (!request_muxed_region(ioreg, 2, DRVNAME))
227 		return -EBUSY;
228 
229 	outb(0x87, ioreg);
230 	outb(0x87, ioreg);
231 
232 	return 0;
233 }
234 
235 static void superio_exit(struct nct6775_sio_data *sio_data)
236 {
237 	int ioreg = sio_data->sioreg;
238 
239 	outb(0xaa, ioreg);
240 	outb(0x02, ioreg);
241 	outb(0x02, ioreg + 1);
242 	release_region(ioreg, 2);
243 }
244 
245 static inline void nct6775_wmi_set_bank(struct nct6775_data *data, u16 reg)
246 {
247 	u8 bank = reg >> 8;
248 
249 	data->bank = bank;
250 }
251 
252 static int nct6775_wmi_reg_read(void *ctx, unsigned int reg, unsigned int *val)
253 {
254 	struct nct6775_data *data = ctx;
255 	int err, word_sized = nct6775_reg_is_word_sized(data, reg);
256 	u8 tmp = 0;
257 	u16 res;
258 
259 	nct6775_wmi_set_bank(data, reg);
260 
261 	err = nct6775_asuswmi_read(data->bank, reg & 0xff, &tmp);
262 	if (err)
263 		return err;
264 
265 	res = tmp;
266 	if (word_sized) {
267 		err = nct6775_asuswmi_read(data->bank, (reg & 0xff) + 1, &tmp);
268 		if (err)
269 			return err;
270 
271 		res = (res << 8) + tmp;
272 	}
273 	*val = res;
274 	return 0;
275 }
276 
277 static int nct6775_wmi_reg_write(void *ctx, unsigned int reg, unsigned int value)
278 {
279 	struct nct6775_data *data = ctx;
280 	int res, word_sized = nct6775_reg_is_word_sized(data, reg);
281 
282 	nct6775_wmi_set_bank(data, reg);
283 
284 	if (word_sized) {
285 		res = nct6775_asuswmi_write(data->bank, reg & 0xff, value >> 8);
286 		if (res)
287 			return res;
288 
289 		res = nct6775_asuswmi_write(data->bank, (reg & 0xff) + 1, value);
290 	} else {
291 		res = nct6775_asuswmi_write(data->bank, reg & 0xff, value);
292 	}
293 
294 	return res;
295 }
296 
297 /*
298  * On older chips, only registers 0x50-0x5f are banked.
299  * On more recent chips, all registers are banked.
300  * Assume that is the case and set the bank number for each access.
301  * Cache the bank number so it only needs to be set if it changes.
302  */
303 static inline void nct6775_set_bank(struct nct6775_data *data, u16 reg)
304 {
305 	u8 bank = reg >> 8;
306 
307 	if (data->bank != bank) {
308 		outb_p(NCT6775_REG_BANK, data->addr + ADDR_REG_OFFSET);
309 		outb_p(bank, data->addr + DATA_REG_OFFSET);
310 		data->bank = bank;
311 	}
312 }
313 
314 static int nct6775_reg_read(void *ctx, unsigned int reg, unsigned int *val)
315 {
316 	struct nct6775_data *data = ctx;
317 	int word_sized = nct6775_reg_is_word_sized(data, reg);
318 
319 	nct6775_set_bank(data, reg);
320 	outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET);
321 	*val = inb_p(data->addr + DATA_REG_OFFSET);
322 	if (word_sized) {
323 		outb_p((reg & 0xff) + 1,
324 		       data->addr + ADDR_REG_OFFSET);
325 		*val = (*val << 8) + inb_p(data->addr + DATA_REG_OFFSET);
326 	}
327 	return 0;
328 }
329 
330 static int nct6775_reg_write(void *ctx, unsigned int reg, unsigned int value)
331 {
332 	struct nct6775_data *data = ctx;
333 	int word_sized = nct6775_reg_is_word_sized(data, reg);
334 
335 	nct6775_set_bank(data, reg);
336 	outb_p(reg & 0xff, data->addr + ADDR_REG_OFFSET);
337 	if (word_sized) {
338 		outb_p(value >> 8, data->addr + DATA_REG_OFFSET);
339 		outb_p((reg & 0xff) + 1,
340 		       data->addr + ADDR_REG_OFFSET);
341 	}
342 	outb_p(value & 0xff, data->addr + DATA_REG_OFFSET);
343 	return 0;
344 }
345 
346 static void nct6791_enable_io_mapping(struct nct6775_sio_data *sio_data)
347 {
348 	int val;
349 
350 	val = sio_data->sio_inb(sio_data, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE);
351 	if (val & 0x10) {
352 		pr_info("Enabling hardware monitor logical device mappings.\n");
353 		sio_data->sio_outb(sio_data, NCT6791_REG_HM_IO_SPACE_LOCK_ENABLE,
354 			       val & ~0x10);
355 	}
356 }
357 
358 static int __maybe_unused nct6775_suspend(struct device *dev)
359 {
360 	int err;
361 	u16 tmp;
362 	struct nct6775_data *data = dev_get_drvdata(dev);
363 
364 	if (IS_ERR(data))
365 		return PTR_ERR(data);
366 
367 	mutex_lock(&data->update_lock);
368 	err = nct6775_read_value(data, data->REG_VBAT, &tmp);
369 	if (err)
370 		goto out;
371 	data->vbat = tmp;
372 	if (data->kind == nct6775) {
373 		err = nct6775_read_value(data, NCT6775_REG_FANDIV1, &tmp);
374 		if (err)
375 			goto out;
376 		data->fandiv1 = tmp;
377 
378 		err = nct6775_read_value(data, NCT6775_REG_FANDIV2, &tmp);
379 		if (err)
380 			goto out;
381 		data->fandiv2 = tmp;
382 	}
383 out:
384 	mutex_unlock(&data->update_lock);
385 
386 	return err;
387 }
388 
389 static int __maybe_unused nct6775_resume(struct device *dev)
390 {
391 	struct nct6775_data *data = dev_get_drvdata(dev);
392 	struct nct6775_sio_data *sio_data = dev_get_platdata(dev);
393 	int i, j, err = 0;
394 	u8 reg;
395 
396 	mutex_lock(&data->update_lock);
397 	data->bank = 0xff;		/* Force initial bank selection */
398 
399 	err = sio_data->sio_enter(sio_data);
400 	if (err)
401 		goto abort;
402 
403 	sio_data->sio_select(sio_data, NCT6775_LD_HWM);
404 	reg = sio_data->sio_inb(sio_data, SIO_REG_ENABLE);
405 	if (reg != data->sio_reg_enable)
406 		sio_data->sio_outb(sio_data, SIO_REG_ENABLE, data->sio_reg_enable);
407 
408 	if (data->kind == nct6791 || data->kind == nct6792 ||
409 	    data->kind == nct6793 || data->kind == nct6795 ||
410 	    data->kind == nct6796 || data->kind == nct6797 ||
411 	    data->kind == nct6798)
412 		nct6791_enable_io_mapping(sio_data);
413 
414 	sio_data->sio_exit(sio_data);
415 
416 	/* Restore limits */
417 	for (i = 0; i < data->in_num; i++) {
418 		if (!(data->have_in & BIT(i)))
419 			continue;
420 
421 		err = nct6775_write_value(data, data->REG_IN_MINMAX[0][i], data->in[i][1]);
422 		if (err)
423 			goto abort;
424 		err = nct6775_write_value(data, data->REG_IN_MINMAX[1][i], data->in[i][2]);
425 		if (err)
426 			goto abort;
427 	}
428 
429 	for (i = 0; i < ARRAY_SIZE(data->fan_min); i++) {
430 		if (!(data->has_fan_min & BIT(i)))
431 			continue;
432 
433 		err = nct6775_write_value(data, data->REG_FAN_MIN[i], data->fan_min[i]);
434 		if (err)
435 			goto abort;
436 	}
437 
438 	for (i = 0; i < NUM_TEMP; i++) {
439 		if (!(data->have_temp & BIT(i)))
440 			continue;
441 
442 		for (j = 1; j < ARRAY_SIZE(data->reg_temp); j++)
443 			if (data->reg_temp[j][i]) {
444 				err = nct6775_write_temp(data, data->reg_temp[j][i],
445 							 data->temp[j][i]);
446 				if (err)
447 					goto abort;
448 			}
449 	}
450 
451 	/* Restore other settings */
452 	err = nct6775_write_value(data, data->REG_VBAT, data->vbat);
453 	if (err)
454 		goto abort;
455 	if (data->kind == nct6775) {
456 		err = nct6775_write_value(data, NCT6775_REG_FANDIV1, data->fandiv1);
457 		if (err)
458 			goto abort;
459 		err = nct6775_write_value(data, NCT6775_REG_FANDIV2, data->fandiv2);
460 	}
461 
462 abort:
463 	/* Force re-reading all values */
464 	data->valid = false;
465 	mutex_unlock(&data->update_lock);
466 
467 	return err;
468 }
469 
470 static SIMPLE_DEV_PM_OPS(nct6775_dev_pm_ops, nct6775_suspend, nct6775_resume);
471 
472 static void
473 nct6775_check_fan_inputs(struct nct6775_data *data, struct nct6775_sio_data *sio_data)
474 {
475 	bool fan3pin = false, fan4pin = false, fan4min = false;
476 	bool fan5pin = false, fan6pin = false, fan7pin = false;
477 	bool pwm3pin = false, pwm4pin = false, pwm5pin = false;
478 	bool pwm6pin = false, pwm7pin = false;
479 
480 	/* Store SIO_REG_ENABLE for use during resume */
481 	sio_data->sio_select(sio_data, NCT6775_LD_HWM);
482 	data->sio_reg_enable = sio_data->sio_inb(sio_data, SIO_REG_ENABLE);
483 
484 	/* fan4 and fan5 share some pins with the GPIO and serial flash */
485 	if (data->kind == nct6775) {
486 		int cr2c = sio_data->sio_inb(sio_data, 0x2c);
487 
488 		fan3pin = cr2c & BIT(6);
489 		pwm3pin = cr2c & BIT(7);
490 
491 		/* On NCT6775, fan4 shares pins with the fdc interface */
492 		fan4pin = !(sio_data->sio_inb(sio_data, 0x2A) & 0x80);
493 	} else if (data->kind == nct6776) {
494 		bool gpok = sio_data->sio_inb(sio_data, 0x27) & 0x80;
495 		const char *board_vendor, *board_name;
496 
497 		board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
498 		board_name = dmi_get_system_info(DMI_BOARD_NAME);
499 
500 		if (board_name && board_vendor &&
501 		    !strcmp(board_vendor, "ASRock")) {
502 			/*
503 			 * Auxiliary fan monitoring is not enabled on ASRock
504 			 * Z77 Pro4-M if booted in UEFI Ultra-FastBoot mode.
505 			 * Observed with BIOS version 2.00.
506 			 */
507 			if (!strcmp(board_name, "Z77 Pro4-M")) {
508 				if ((data->sio_reg_enable & 0xe0) != 0xe0) {
509 					data->sio_reg_enable |= 0xe0;
510 					sio_data->sio_outb(sio_data, SIO_REG_ENABLE,
511 						     data->sio_reg_enable);
512 				}
513 			}
514 		}
515 
516 		if (data->sio_reg_enable & 0x80)
517 			fan3pin = gpok;
518 		else
519 			fan3pin = !(sio_data->sio_inb(sio_data, 0x24) & 0x40);
520 
521 		if (data->sio_reg_enable & 0x40)
522 			fan4pin = gpok;
523 		else
524 			fan4pin = sio_data->sio_inb(sio_data, 0x1C) & 0x01;
525 
526 		if (data->sio_reg_enable & 0x20)
527 			fan5pin = gpok;
528 		else
529 			fan5pin = sio_data->sio_inb(sio_data, 0x1C) & 0x02;
530 
531 		fan4min = fan4pin;
532 		pwm3pin = fan3pin;
533 	} else if (data->kind == nct6106) {
534 		int cr24 = sio_data->sio_inb(sio_data, 0x24);
535 
536 		fan3pin = !(cr24 & 0x80);
537 		pwm3pin = cr24 & 0x08;
538 	} else if (data->kind == nct6116) {
539 		int cr1a = sio_data->sio_inb(sio_data, 0x1a);
540 		int cr1b = sio_data->sio_inb(sio_data, 0x1b);
541 		int cr24 = sio_data->sio_inb(sio_data, 0x24);
542 		int cr2a = sio_data->sio_inb(sio_data, 0x2a);
543 		int cr2b = sio_data->sio_inb(sio_data, 0x2b);
544 		int cr2f = sio_data->sio_inb(sio_data, 0x2f);
545 
546 		fan3pin = !(cr2b & 0x10);
547 		fan4pin = (cr2b & 0x80) ||			// pin 1(2)
548 			(!(cr2f & 0x10) && (cr1a & 0x04));	// pin 65(66)
549 		fan5pin = (cr2b & 0x80) ||			// pin 126(127)
550 			(!(cr1b & 0x03) && (cr2a & 0x02));	// pin 94(96)
551 
552 		pwm3pin = fan3pin && (cr24 & 0x08);
553 		pwm4pin = fan4pin;
554 		pwm5pin = fan5pin;
555 	} else {
556 		/*
557 		 * NCT6779D, NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D,
558 		 * NCT6797D, NCT6798D
559 		 */
560 		int cr1a = sio_data->sio_inb(sio_data, 0x1a);
561 		int cr1b = sio_data->sio_inb(sio_data, 0x1b);
562 		int cr1c = sio_data->sio_inb(sio_data, 0x1c);
563 		int cr1d = sio_data->sio_inb(sio_data, 0x1d);
564 		int cr2a = sio_data->sio_inb(sio_data, 0x2a);
565 		int cr2b = sio_data->sio_inb(sio_data, 0x2b);
566 		int cr2d = sio_data->sio_inb(sio_data, 0x2d);
567 		int cr2f = sio_data->sio_inb(sio_data, 0x2f);
568 		bool dsw_en = cr2f & BIT(3);
569 		bool ddr4_en = cr2f & BIT(4);
570 		int cre0;
571 		int creb;
572 		int cred;
573 
574 		sio_data->sio_select(sio_data, NCT6775_LD_12);
575 		cre0 = sio_data->sio_inb(sio_data, 0xe0);
576 		creb = sio_data->sio_inb(sio_data, 0xeb);
577 		cred = sio_data->sio_inb(sio_data, 0xed);
578 
579 		fan3pin = !(cr1c & BIT(5));
580 		fan4pin = !(cr1c & BIT(6));
581 		fan5pin = !(cr1c & BIT(7));
582 
583 		pwm3pin = !(cr1c & BIT(0));
584 		pwm4pin = !(cr1c & BIT(1));
585 		pwm5pin = !(cr1c & BIT(2));
586 
587 		switch (data->kind) {
588 		case nct6791:
589 			fan6pin = cr2d & BIT(1);
590 			pwm6pin = cr2d & BIT(0);
591 			break;
592 		case nct6792:
593 			fan6pin = !dsw_en && (cr2d & BIT(1));
594 			pwm6pin = !dsw_en && (cr2d & BIT(0));
595 			break;
596 		case nct6793:
597 			fan5pin |= cr1b & BIT(5);
598 			fan5pin |= creb & BIT(5);
599 
600 			fan6pin = !dsw_en && (cr2d & BIT(1));
601 			fan6pin |= creb & BIT(3);
602 
603 			pwm5pin |= cr2d & BIT(7);
604 			pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
605 
606 			pwm6pin = !dsw_en && (cr2d & BIT(0));
607 			pwm6pin |= creb & BIT(2);
608 			break;
609 		case nct6795:
610 			fan5pin |= cr1b & BIT(5);
611 			fan5pin |= creb & BIT(5);
612 
613 			fan6pin = (cr2a & BIT(4)) &&
614 					(!dsw_en || (cred & BIT(4)));
615 			fan6pin |= creb & BIT(3);
616 
617 			pwm5pin |= cr2d & BIT(7);
618 			pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
619 
620 			pwm6pin = (cr2a & BIT(3)) && (cred & BIT(2));
621 			pwm6pin |= creb & BIT(2);
622 			break;
623 		case nct6796:
624 			fan5pin |= cr1b & BIT(5);
625 			fan5pin |= (cre0 & BIT(3)) && !(cr1b & BIT(0));
626 			fan5pin |= creb & BIT(5);
627 
628 			fan6pin = (cr2a & BIT(4)) &&
629 					(!dsw_en || (cred & BIT(4)));
630 			fan6pin |= creb & BIT(3);
631 
632 			fan7pin = !(cr2b & BIT(2));
633 
634 			pwm5pin |= cr2d & BIT(7);
635 			pwm5pin |= (cre0 & BIT(4)) && !(cr1b & BIT(0));
636 			pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
637 
638 			pwm6pin = (cr2a & BIT(3)) && (cred & BIT(2));
639 			pwm6pin |= creb & BIT(2);
640 
641 			pwm7pin = !(cr1d & (BIT(2) | BIT(3)));
642 			break;
643 		case nct6797:
644 			fan5pin |= !ddr4_en && (cr1b & BIT(5));
645 			fan5pin |= creb & BIT(5);
646 
647 			fan6pin = cr2a & BIT(4);
648 			fan6pin |= creb & BIT(3);
649 
650 			fan7pin = cr1a & BIT(1);
651 
652 			pwm5pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
653 			pwm5pin |= !ddr4_en && (cr2d & BIT(7));
654 
655 			pwm6pin = creb & BIT(2);
656 			pwm6pin |= cred & BIT(2);
657 
658 			pwm7pin = cr1d & BIT(4);
659 			break;
660 		case nct6798:
661 			fan6pin = !(cr1b & BIT(0)) && (cre0 & BIT(3));
662 			fan6pin |= cr2a & BIT(4);
663 			fan6pin |= creb & BIT(5);
664 
665 			fan7pin = cr1b & BIT(5);
666 			fan7pin |= !(cr2b & BIT(2));
667 			fan7pin |= creb & BIT(3);
668 
669 			pwm6pin = !(cr1b & BIT(0)) && (cre0 & BIT(4));
670 			pwm6pin |= !(cred & BIT(2)) && (cr2a & BIT(3));
671 			pwm6pin |= (creb & BIT(4)) && !(cr2a & BIT(0));
672 
673 			pwm7pin = !(cr1d & (BIT(2) | BIT(3)));
674 			pwm7pin |= cr2d & BIT(7);
675 			pwm7pin |= creb & BIT(2);
676 			break;
677 		default:	/* NCT6779D */
678 			break;
679 		}
680 
681 		fan4min = fan4pin;
682 	}
683 
684 	/* fan 1 and 2 (0x03) are always present */
685 	data->has_fan = 0x03 | (fan3pin << 2) | (fan4pin << 3) |
686 		(fan5pin << 4) | (fan6pin << 5) | (fan7pin << 6);
687 	data->has_fan_min = 0x03 | (fan3pin << 2) | (fan4min << 3) |
688 		(fan5pin << 4) | (fan6pin << 5) | (fan7pin << 6);
689 	data->has_pwm = 0x03 | (pwm3pin << 2) | (pwm4pin << 3) |
690 		(pwm5pin << 4) | (pwm6pin << 5) | (pwm7pin << 6);
691 }
692 
693 static ssize_t
694 cpu0_vid_show(struct device *dev, struct device_attribute *attr, char *buf)
695 {
696 	struct nct6775_data *data = dev_get_drvdata(dev);
697 
698 	return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
699 }
700 
701 static DEVICE_ATTR_RO(cpu0_vid);
702 
703 /* Case open detection */
704 
705 static const u8 NCT6775_REG_CR_CASEOPEN_CLR[] = { 0xe6, 0xee };
706 static const u8 NCT6775_CR_CASEOPEN_CLR_MASK[] = { 0x20, 0x01 };
707 
708 static ssize_t
709 clear_caseopen(struct device *dev, struct device_attribute *attr,
710 	       const char *buf, size_t count)
711 {
712 	struct nct6775_data *data = dev_get_drvdata(dev);
713 	struct nct6775_sio_data *sio_data = data->driver_data;
714 	int nr = to_sensor_dev_attr(attr)->index - INTRUSION_ALARM_BASE;
715 	unsigned long val;
716 	u8 reg;
717 	int ret;
718 
719 	if (kstrtoul(buf, 10, &val) || val != 0)
720 		return -EINVAL;
721 
722 	mutex_lock(&data->update_lock);
723 
724 	/*
725 	 * Use CR registers to clear caseopen status.
726 	 * The CR registers are the same for all chips, and not all chips
727 	 * support clearing the caseopen status through "regular" registers.
728 	 */
729 	ret = sio_data->sio_enter(sio_data);
730 	if (ret) {
731 		count = ret;
732 		goto error;
733 	}
734 
735 	sio_data->sio_select(sio_data, NCT6775_LD_ACPI);
736 	reg = sio_data->sio_inb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr]);
737 	reg |= NCT6775_CR_CASEOPEN_CLR_MASK[nr];
738 	sio_data->sio_outb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg);
739 	reg &= ~NCT6775_CR_CASEOPEN_CLR_MASK[nr];
740 	sio_data->sio_outb(sio_data, NCT6775_REG_CR_CASEOPEN_CLR[nr], reg);
741 	sio_data->sio_exit(sio_data);
742 
743 	data->valid = false;	/* Force cache refresh */
744 error:
745 	mutex_unlock(&data->update_lock);
746 	return count;
747 }
748 
749 static SENSOR_DEVICE_ATTR(intrusion0_alarm, 0644, nct6775_show_alarm,
750 			  clear_caseopen, INTRUSION_ALARM_BASE);
751 static SENSOR_DEVICE_ATTR(intrusion1_alarm, 0644, nct6775_show_alarm,
752 			  clear_caseopen, INTRUSION_ALARM_BASE + 1);
753 static SENSOR_DEVICE_ATTR(intrusion0_beep, 0644, nct6775_show_beep,
754 			  nct6775_store_beep, INTRUSION_ALARM_BASE);
755 static SENSOR_DEVICE_ATTR(intrusion1_beep, 0644, nct6775_show_beep,
756 			  nct6775_store_beep, INTRUSION_ALARM_BASE + 1);
757 static SENSOR_DEVICE_ATTR(beep_enable, 0644, nct6775_show_beep,
758 			  nct6775_store_beep, BEEP_ENABLE_BASE);
759 
760 static umode_t nct6775_other_is_visible(struct kobject *kobj,
761 					struct attribute *attr, int index)
762 {
763 	struct device *dev = kobj_to_dev(kobj);
764 	struct nct6775_data *data = dev_get_drvdata(dev);
765 
766 	if (index == 0 && !data->have_vid)
767 		return 0;
768 
769 	if (index == 1 || index == 2) {
770 		if (data->ALARM_BITS[INTRUSION_ALARM_BASE + index - 1] < 0)
771 			return 0;
772 	}
773 
774 	if (index == 3 || index == 4) {
775 		if (data->BEEP_BITS[INTRUSION_ALARM_BASE + index - 3] < 0)
776 			return 0;
777 	}
778 
779 	return nct6775_attr_mode(data, attr);
780 }
781 
782 /*
783  * nct6775_other_is_visible uses the index into the following array
784  * to determine if attributes should be created or not.
785  * Any change in order or content must be matched.
786  */
787 static struct attribute *nct6775_attributes_other[] = {
788 	&dev_attr_cpu0_vid.attr,				/* 0 */
789 	&sensor_dev_attr_intrusion0_alarm.dev_attr.attr,	/* 1 */
790 	&sensor_dev_attr_intrusion1_alarm.dev_attr.attr,	/* 2 */
791 	&sensor_dev_attr_intrusion0_beep.dev_attr.attr,		/* 3 */
792 	&sensor_dev_attr_intrusion1_beep.dev_attr.attr,		/* 4 */
793 	&sensor_dev_attr_beep_enable.dev_attr.attr,		/* 5 */
794 
795 	NULL
796 };
797 
798 static const struct attribute_group nct6775_group_other = {
799 	.attrs = nct6775_attributes_other,
800 	.is_visible = nct6775_other_is_visible,
801 };
802 
803 static int nct6775_platform_probe_init(struct nct6775_data *data)
804 {
805 	int err;
806 	u8 cr2a;
807 	struct nct6775_sio_data *sio_data = data->driver_data;
808 
809 	err = sio_data->sio_enter(sio_data);
810 	if (err)
811 		return err;
812 
813 	cr2a = sio_data->sio_inb(sio_data, 0x2a);
814 	switch (data->kind) {
815 	case nct6775:
816 		data->have_vid = (cr2a & 0x40);
817 		break;
818 	case nct6776:
819 		data->have_vid = (cr2a & 0x60) == 0x40;
820 		break;
821 	case nct6106:
822 	case nct6116:
823 	case nct6779:
824 	case nct6791:
825 	case nct6792:
826 	case nct6793:
827 	case nct6795:
828 	case nct6796:
829 	case nct6797:
830 	case nct6798:
831 		break;
832 	}
833 
834 	/*
835 	 * Read VID value
836 	 * We can get the VID input values directly at logical device D 0xe3.
837 	 */
838 	if (data->have_vid) {
839 		sio_data->sio_select(sio_data, NCT6775_LD_VID);
840 		data->vid = sio_data->sio_inb(sio_data, 0xe3);
841 		data->vrm = vid_which_vrm();
842 	}
843 
844 	if (fan_debounce) {
845 		u8 tmp;
846 
847 		sio_data->sio_select(sio_data, NCT6775_LD_HWM);
848 		tmp = sio_data->sio_inb(sio_data,
849 				    NCT6775_REG_CR_FAN_DEBOUNCE);
850 		switch (data->kind) {
851 		case nct6106:
852 		case nct6116:
853 			tmp |= 0xe0;
854 			break;
855 		case nct6775:
856 			tmp |= 0x1e;
857 			break;
858 		case nct6776:
859 		case nct6779:
860 			tmp |= 0x3e;
861 			break;
862 		case nct6791:
863 		case nct6792:
864 		case nct6793:
865 		case nct6795:
866 		case nct6796:
867 		case nct6797:
868 		case nct6798:
869 			tmp |= 0x7e;
870 			break;
871 		}
872 		sio_data->sio_outb(sio_data, NCT6775_REG_CR_FAN_DEBOUNCE,
873 			     tmp);
874 		pr_info("Enabled fan debounce for chip %s\n", data->name);
875 	}
876 
877 	nct6775_check_fan_inputs(data, sio_data);
878 
879 	sio_data->sio_exit(sio_data);
880 
881 	return nct6775_add_attr_group(data, &nct6775_group_other);
882 }
883 
884 static const struct regmap_config nct6775_regmap_config = {
885 	.reg_bits = 16,
886 	.val_bits = 16,
887 	.reg_read = nct6775_reg_read,
888 	.reg_write = nct6775_reg_write,
889 };
890 
891 static const struct regmap_config nct6775_wmi_regmap_config = {
892 	.reg_bits = 16,
893 	.val_bits = 16,
894 	.reg_read = nct6775_wmi_reg_read,
895 	.reg_write = nct6775_wmi_reg_write,
896 };
897 
898 static int nct6775_platform_probe(struct platform_device *pdev)
899 {
900 	struct device *dev = &pdev->dev;
901 	struct nct6775_sio_data *sio_data = dev_get_platdata(dev);
902 	struct nct6775_data *data;
903 	struct resource *res;
904 	const struct regmap_config *regmapcfg;
905 
906 	if (sio_data->access == access_direct) {
907 		res = platform_get_resource(pdev, IORESOURCE_IO, 0);
908 		if (!devm_request_region(&pdev->dev, res->start, IOREGION_LENGTH, DRVNAME))
909 			return -EBUSY;
910 	}
911 
912 	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
913 	if (!data)
914 		return -ENOMEM;
915 
916 	data->kind = sio_data->kind;
917 	data->sioreg = sio_data->sioreg;
918 
919 	if (sio_data->access == access_direct) {
920 		data->addr = res->start;
921 		regmapcfg = &nct6775_regmap_config;
922 	} else {
923 		regmapcfg = &nct6775_wmi_regmap_config;
924 	}
925 
926 	platform_set_drvdata(pdev, data);
927 
928 	data->driver_data = sio_data;
929 	data->driver_init = nct6775_platform_probe_init;
930 
931 	return nct6775_probe(&pdev->dev, data, regmapcfg);
932 }
933 
934 static struct platform_driver nct6775_driver = {
935 	.driver = {
936 		.name	= DRVNAME,
937 		.pm	= &nct6775_dev_pm_ops,
938 	},
939 	.probe		= nct6775_platform_probe,
940 };
941 
942 /* nct6775_find() looks for a '627 in the Super-I/O config space */
943 static int __init nct6775_find(int sioaddr, struct nct6775_sio_data *sio_data)
944 {
945 	u16 val;
946 	int err;
947 	int addr;
948 
949 	sio_data->access = access_direct;
950 	sio_data->sioreg = sioaddr;
951 
952 	err = sio_data->sio_enter(sio_data);
953 	if (err)
954 		return err;
955 
956 	val = (sio_data->sio_inb(sio_data, SIO_REG_DEVID) << 8) |
957 		sio_data->sio_inb(sio_data, SIO_REG_DEVID + 1);
958 	if (force_id && val != 0xffff)
959 		val = force_id;
960 
961 	switch (val & SIO_ID_MASK) {
962 	case SIO_NCT6106_ID:
963 		sio_data->kind = nct6106;
964 		break;
965 	case SIO_NCT6116_ID:
966 		sio_data->kind = nct6116;
967 		break;
968 	case SIO_NCT6775_ID:
969 		sio_data->kind = nct6775;
970 		break;
971 	case SIO_NCT6776_ID:
972 		sio_data->kind = nct6776;
973 		break;
974 	case SIO_NCT6779_ID:
975 		sio_data->kind = nct6779;
976 		break;
977 	case SIO_NCT6791_ID:
978 		sio_data->kind = nct6791;
979 		break;
980 	case SIO_NCT6792_ID:
981 		sio_data->kind = nct6792;
982 		break;
983 	case SIO_NCT6793_ID:
984 		sio_data->kind = nct6793;
985 		break;
986 	case SIO_NCT6795_ID:
987 		sio_data->kind = nct6795;
988 		break;
989 	case SIO_NCT6796_ID:
990 		sio_data->kind = nct6796;
991 		break;
992 	case SIO_NCT6797_ID:
993 		sio_data->kind = nct6797;
994 		break;
995 	case SIO_NCT6798_ID:
996 		sio_data->kind = nct6798;
997 		break;
998 	default:
999 		if (val != 0xffff)
1000 			pr_debug("unsupported chip ID: 0x%04x\n", val);
1001 		sio_data->sio_exit(sio_data);
1002 		return -ENODEV;
1003 	}
1004 
1005 	/* We have a known chip, find the HWM I/O address */
1006 	sio_data->sio_select(sio_data, NCT6775_LD_HWM);
1007 	val = (sio_data->sio_inb(sio_data, SIO_REG_ADDR) << 8)
1008 	    | sio_data->sio_inb(sio_data, SIO_REG_ADDR + 1);
1009 	addr = val & IOREGION_ALIGNMENT;
1010 	if (addr == 0) {
1011 		pr_err("Refusing to enable a Super-I/O device with a base I/O port 0\n");
1012 		sio_data->sio_exit(sio_data);
1013 		return -ENODEV;
1014 	}
1015 
1016 	/* Activate logical device if needed */
1017 	val = sio_data->sio_inb(sio_data, SIO_REG_ENABLE);
1018 	if (!(val & 0x01)) {
1019 		pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n");
1020 		sio_data->sio_outb(sio_data, SIO_REG_ENABLE, val | 0x01);
1021 	}
1022 
1023 	if (sio_data->kind == nct6791 || sio_data->kind == nct6792 ||
1024 	    sio_data->kind == nct6793 || sio_data->kind == nct6795 ||
1025 	    sio_data->kind == nct6796 || sio_data->kind == nct6797 ||
1026 	    sio_data->kind == nct6798)
1027 		nct6791_enable_io_mapping(sio_data);
1028 
1029 	sio_data->sio_exit(sio_data);
1030 	pr_info("Found %s or compatible chip at %#x:%#x\n",
1031 		nct6775_sio_names[sio_data->kind], sioaddr, addr);
1032 
1033 	return addr;
1034 }
1035 
1036 /*
1037  * when Super-I/O functions move to a separate file, the Super-I/O
1038  * bus will manage the lifetime of the device and this module will only keep
1039  * track of the nct6775 driver. But since we use platform_device_alloc(), we
1040  * must keep track of the device
1041  */
1042 static struct platform_device *pdev[2];
1043 
1044 static const char * const asus_wmi_boards[] = {
1045 	"PRO H410T",
1046 	"ProArt X570-CREATOR WIFI",
1047 	"Pro B550M-C",
1048 	"Pro WS X570-ACE",
1049 	"PRIME B360-PLUS",
1050 	"PRIME B460-PLUS",
1051 	"PRIME B550-PLUS",
1052 	"PRIME B550M-A",
1053 	"PRIME B550M-A (WI-FI)",
1054 	"PRIME H410M-R",
1055 	"PRIME X570-P",
1056 	"PRIME X570-PRO",
1057 	"ROG CROSSHAIR VIII DARK HERO",
1058 	"ROG CROSSHAIR VIII FORMULA",
1059 	"ROG CROSSHAIR VIII HERO",
1060 	"ROG CROSSHAIR VIII IMPACT",
1061 	"ROG STRIX B550-A GAMING",
1062 	"ROG STRIX B550-E GAMING",
1063 	"ROG STRIX B550-F GAMING",
1064 	"ROG STRIX B550-F GAMING (WI-FI)",
1065 	"ROG STRIX B550-F GAMING WIFI II",
1066 	"ROG STRIX B550-I GAMING",
1067 	"ROG STRIX B550-XE GAMING (WI-FI)",
1068 	"ROG STRIX X570-E GAMING",
1069 	"ROG STRIX X570-E GAMING WIFI II",
1070 	"ROG STRIX X570-F GAMING",
1071 	"ROG STRIX X570-I GAMING",
1072 	"ROG STRIX Z390-E GAMING",
1073 	"ROG STRIX Z390-F GAMING",
1074 	"ROG STRIX Z390-H GAMING",
1075 	"ROG STRIX Z390-I GAMING",
1076 	"ROG STRIX Z490-A GAMING",
1077 	"ROG STRIX Z490-E GAMING",
1078 	"ROG STRIX Z490-F GAMING",
1079 	"ROG STRIX Z490-G GAMING",
1080 	"ROG STRIX Z490-G GAMING (WI-FI)",
1081 	"ROG STRIX Z490-H GAMING",
1082 	"ROG STRIX Z490-I GAMING",
1083 	"TUF GAMING B550M-PLUS",
1084 	"TUF GAMING B550M-PLUS (WI-FI)",
1085 	"TUF GAMING B550-PLUS",
1086 	"TUF GAMING B550-PRO",
1087 	"TUF GAMING X570-PLUS",
1088 	"TUF GAMING X570-PLUS (WI-FI)",
1089 	"TUF GAMING X570-PRO (WI-FI)",
1090 	"TUF GAMING Z490-PLUS",
1091 	"TUF GAMING Z490-PLUS (WI-FI)",
1092 };
1093 
1094 static int __init sensors_nct6775_platform_init(void)
1095 {
1096 	int i, err;
1097 	bool found = false;
1098 	int address;
1099 	struct resource res;
1100 	struct nct6775_sio_data sio_data;
1101 	int sioaddr[2] = { 0x2e, 0x4e };
1102 	enum sensor_access access = access_direct;
1103 	const char *board_vendor, *board_name;
1104 	u8 tmp;
1105 
1106 	err = platform_driver_register(&nct6775_driver);
1107 	if (err)
1108 		return err;
1109 
1110 	board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR);
1111 	board_name = dmi_get_system_info(DMI_BOARD_NAME);
1112 
1113 	if (board_name && board_vendor &&
1114 	    !strcmp(board_vendor, "ASUSTeK COMPUTER INC.")) {
1115 		err = match_string(asus_wmi_boards, ARRAY_SIZE(asus_wmi_boards),
1116 				   board_name);
1117 		if (err >= 0) {
1118 			/* if reading chip id via WMI succeeds, use WMI */
1119 			if (!nct6775_asuswmi_read(0, NCT6775_PORT_CHIPID, &tmp) && tmp) {
1120 				pr_info("Using Asus WMI to access %#x chip.\n", tmp);
1121 				access = access_asuswmi;
1122 			} else {
1123 				pr_err("Can't read ChipID by Asus WMI.\n");
1124 			}
1125 		}
1126 	}
1127 
1128 	/*
1129 	 * initialize sio_data->kind and sio_data->sioreg.
1130 	 *
1131 	 * when Super-I/O functions move to a separate file, the Super-I/O
1132 	 * driver will probe 0x2e and 0x4e and auto-detect the presence of a
1133 	 * nct6775 hardware monitor, and call probe()
1134 	 */
1135 	for (i = 0; i < ARRAY_SIZE(pdev); i++) {
1136 		sio_data.sio_outb = superio_outb;
1137 		sio_data.sio_inb = superio_inb;
1138 		sio_data.sio_select = superio_select;
1139 		sio_data.sio_enter = superio_enter;
1140 		sio_data.sio_exit = superio_exit;
1141 
1142 		address = nct6775_find(sioaddr[i], &sio_data);
1143 		if (address <= 0)
1144 			continue;
1145 
1146 		found = true;
1147 
1148 		sio_data.access = access;
1149 
1150 		if (access == access_asuswmi) {
1151 			sio_data.sio_outb = superio_wmi_outb;
1152 			sio_data.sio_inb = superio_wmi_inb;
1153 			sio_data.sio_select = superio_wmi_select;
1154 			sio_data.sio_enter = superio_wmi_enter;
1155 			sio_data.sio_exit = superio_wmi_exit;
1156 		}
1157 
1158 		pdev[i] = platform_device_alloc(DRVNAME, address);
1159 		if (!pdev[i]) {
1160 			err = -ENOMEM;
1161 			goto exit_device_unregister;
1162 		}
1163 
1164 		err = platform_device_add_data(pdev[i], &sio_data,
1165 					       sizeof(struct nct6775_sio_data));
1166 		if (err)
1167 			goto exit_device_put;
1168 
1169 		if (sio_data.access == access_direct) {
1170 			memset(&res, 0, sizeof(res));
1171 			res.name = DRVNAME;
1172 			res.start = address + IOREGION_OFFSET;
1173 			res.end = address + IOREGION_OFFSET + IOREGION_LENGTH - 1;
1174 			res.flags = IORESOURCE_IO;
1175 
1176 			err = acpi_check_resource_conflict(&res);
1177 			if (err) {
1178 				platform_device_put(pdev[i]);
1179 				pdev[i] = NULL;
1180 				continue;
1181 			}
1182 
1183 			err = platform_device_add_resources(pdev[i], &res, 1);
1184 			if (err)
1185 				goto exit_device_put;
1186 		}
1187 
1188 		/* platform_device_add calls probe() */
1189 		err = platform_device_add(pdev[i]);
1190 		if (err)
1191 			goto exit_device_put;
1192 	}
1193 	if (!found) {
1194 		err = -ENODEV;
1195 		goto exit_unregister;
1196 	}
1197 
1198 	return 0;
1199 
1200 exit_device_put:
1201 	platform_device_put(pdev[i]);
1202 exit_device_unregister:
1203 	while (--i >= 0) {
1204 		if (pdev[i])
1205 			platform_device_unregister(pdev[i]);
1206 	}
1207 exit_unregister:
1208 	platform_driver_unregister(&nct6775_driver);
1209 	return err;
1210 }
1211 
1212 static void __exit sensors_nct6775_platform_exit(void)
1213 {
1214 	int i;
1215 
1216 	for (i = 0; i < ARRAY_SIZE(pdev); i++) {
1217 		if (pdev[i])
1218 			platform_device_unregister(pdev[i]);
1219 	}
1220 	platform_driver_unregister(&nct6775_driver);
1221 }
1222 
1223 MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
1224 MODULE_DESCRIPTION("Platform driver for NCT6775F and compatible chips");
1225 MODULE_LICENSE("GPL");
1226 MODULE_IMPORT_NS(HWMON_NCT6775);
1227 
1228 module_init(sensors_nct6775_platform_init);
1229 module_exit(sensors_nct6775_platform_exit);
1230