xref: /openbmc/linux/drivers/hwmon/max6621.c (revision b593bce5)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Hardware monitoring driver for Maxim MAX6621
4  *
5  * Copyright (c) 2017 Mellanox Technologies. All rights reserved.
6  * Copyright (c) 2017 Vadim Pasternak <vadimp@mellanox.com>
7  */
8 
9 #include <linux/bitops.h>
10 #include <linux/hwmon.h>
11 #include <linux/hwmon-sysfs.h>
12 #include <linux/i2c.h>
13 #include <linux/init.h>
14 #include <linux/module.h>
15 #include <linux/of_device.h>
16 #include <linux/regmap.h>
17 
18 #define MAX6621_DRV_NAME		"max6621"
19 #define MAX6621_TEMP_INPUT_REG_NUM	9
20 #define MAX6621_TEMP_INPUT_MIN		-127000
21 #define MAX6621_TEMP_INPUT_MAX		128000
22 #define MAX6621_TEMP_ALERT_CHAN_SHIFT	1
23 
24 #define MAX6621_TEMP_S0D0_REG		0x00
25 #define MAX6621_TEMP_S0D1_REG		0x01
26 #define MAX6621_TEMP_S1D0_REG		0x02
27 #define MAX6621_TEMP_S1D1_REG		0x03
28 #define MAX6621_TEMP_S2D0_REG		0x04
29 #define MAX6621_TEMP_S2D1_REG		0x05
30 #define MAX6621_TEMP_S3D0_REG		0x06
31 #define MAX6621_TEMP_S3D1_REG		0x07
32 #define MAX6621_TEMP_MAX_REG		0x08
33 #define MAX6621_TEMP_MAX_ADDR_REG	0x0a
34 #define MAX6621_TEMP_ALERT_CAUSE_REG	0x0b
35 #define MAX6621_CONFIG0_REG		0x0c
36 #define MAX6621_CONFIG1_REG		0x0d
37 #define MAX6621_CONFIG2_REG		0x0e
38 #define MAX6621_CONFIG3_REG		0x0f
39 #define MAX6621_TEMP_S0_ALERT_REG	0x10
40 #define MAX6621_TEMP_S1_ALERT_REG	0x11
41 #define MAX6621_TEMP_S2_ALERT_REG	0x12
42 #define MAX6621_TEMP_S3_ALERT_REG	0x13
43 #define MAX6621_CLEAR_ALERT_REG		0x15
44 #define MAX6621_REG_MAX			(MAX6621_CLEAR_ALERT_REG + 1)
45 #define MAX6621_REG_TEMP_SHIFT		0x06
46 
47 #define MAX6621_ENABLE_TEMP_ALERTS_BIT	4
48 #define MAX6621_ENABLE_I2C_CRC_BIT	5
49 #define MAX6621_ENABLE_ALTERNATE_DATA	6
50 #define MAX6621_ENABLE_LOCKUP_TO	7
51 #define MAX6621_ENABLE_S0D0_BIT		8
52 #define MAX6621_ENABLE_S3D1_BIT		15
53 #define MAX6621_ENABLE_TEMP_ALL		GENMASK(MAX6621_ENABLE_S3D1_BIT, \
54 						MAX6621_ENABLE_S0D0_BIT)
55 #define MAX6621_POLL_DELAY_MASK		0x5
56 #define MAX6621_CONFIG0_INIT		(MAX6621_ENABLE_TEMP_ALL | \
57 					 BIT(MAX6621_ENABLE_LOCKUP_TO) | \
58 					 BIT(MAX6621_ENABLE_I2C_CRC_BIT) | \
59 					 MAX6621_POLL_DELAY_MASK)
60 #define MAX6621_PECI_BIT_TIME		0x2
61 #define MAX6621_PECI_RETRY_NUM		0x3
62 #define MAX6621_CONFIG1_INIT		((MAX6621_PECI_BIT_TIME << 8) | \
63 					 MAX6621_PECI_RETRY_NUM)
64 
65 /* Error codes */
66 #define MAX6621_TRAN_FAILED	0x8100	/*
67 					 * PECI transaction failed for more
68 					 * than the configured number of
69 					 * consecutive retries.
70 					 */
71 #define MAX6621_POOL_DIS	0x8101	/*
72 					 * Polling disabled for requested
73 					 * socket/domain.
74 					 */
75 #define MAX6621_POOL_UNCOMPLETE	0x8102	/*
76 					 * First poll not yet completed for
77 					 * requested socket/domain (on
78 					 * startup).
79 					 */
80 #define MAX6621_SD_DIS		0x8103	/*
81 					 * Read maximum temperature requested,
82 					 * but no sockets/domains enabled or
83 					 * all enabled sockets/domains have
84 					 * errors; or read maximum temperature
85 					 * address requested, but read maximum
86 					 * temperature was not called.
87 					 */
88 #define MAX6621_ALERT_DIS	0x8104	/*
89 					 * Get alert socket/domain requested,
90 					 * but no alert active.
91 					 */
92 #define MAX6621_PECI_ERR_MIN	0x8000	/* Intel spec PECI error min value. */
93 #define MAX6621_PECI_ERR_MAX	0x80ff	/* Intel spec PECI error max value. */
94 
95 static const u32 max6621_temp_regs[] = {
96 	MAX6621_TEMP_MAX_REG, MAX6621_TEMP_S0D0_REG, MAX6621_TEMP_S1D0_REG,
97 	MAX6621_TEMP_S2D0_REG, MAX6621_TEMP_S3D0_REG, MAX6621_TEMP_S0D1_REG,
98 	MAX6621_TEMP_S1D1_REG, MAX6621_TEMP_S2D1_REG, MAX6621_TEMP_S3D1_REG,
99 };
100 
101 static const char *const max6621_temp_labels[] = {
102 	"maximum",
103 	"socket0_0",
104 	"socket1_0",
105 	"socket2_0",
106 	"socket3_0",
107 	"socket0_1",
108 	"socket1_1",
109 	"socket2_1",
110 	"socket3_1",
111 };
112 
113 static const int max6621_temp_alert_chan2reg[] = {
114 	MAX6621_TEMP_S0_ALERT_REG,
115 	MAX6621_TEMP_S1_ALERT_REG,
116 	MAX6621_TEMP_S2_ALERT_REG,
117 	MAX6621_TEMP_S3_ALERT_REG,
118 };
119 
120 /**
121  * struct max6621_data - private data:
122  *
123  * @client: I2C client;
124  * @regmap: register map handle;
125  * @input_chan2reg: mapping from channel to register;
126  */
127 struct max6621_data {
128 	struct i2c_client	*client;
129 	struct regmap		*regmap;
130 	int			input_chan2reg[MAX6621_TEMP_INPUT_REG_NUM + 1];
131 };
132 
133 static long max6621_temp_mc2reg(long val)
134 {
135 	return (val / 1000L) << MAX6621_REG_TEMP_SHIFT;
136 }
137 
138 static umode_t
139 max6621_is_visible(const void *data, enum hwmon_sensor_types type, u32 attr,
140 		   int channel)
141 {
142 	/* Skip channels which are not physically conncted. */
143 	if (((struct max6621_data *)data)->input_chan2reg[channel] < 0)
144 		return 0;
145 
146 	switch (type) {
147 	case hwmon_temp:
148 		switch (attr) {
149 		case hwmon_temp_input:
150 		case hwmon_temp_label:
151 		case hwmon_temp_crit_alarm:
152 			return 0444;
153 		case hwmon_temp_offset:
154 		case hwmon_temp_crit:
155 			return 0644;
156 		default:
157 			break;
158 		}
159 
160 	default:
161 		break;
162 	}
163 
164 	return 0;
165 }
166 
167 static int max6621_verify_reg_data(struct device *dev, int regval)
168 {
169 	if (regval >= MAX6621_PECI_ERR_MIN &&
170 	    regval <= MAX6621_PECI_ERR_MAX) {
171 		dev_dbg(dev, "PECI error code - err 0x%04x.\n",
172 			regval);
173 
174 		return -EIO;
175 	}
176 
177 	switch (regval) {
178 	case MAX6621_TRAN_FAILED:
179 		dev_dbg(dev, "PECI transaction failed - err 0x%04x.\n",
180 			regval);
181 		return -EIO;
182 	case MAX6621_POOL_DIS:
183 		dev_dbg(dev, "Polling disabled - err 0x%04x.\n", regval);
184 		return -EOPNOTSUPP;
185 	case MAX6621_POOL_UNCOMPLETE:
186 		dev_dbg(dev, "First poll not completed on startup - err 0x%04x.\n",
187 			regval);
188 		return -EIO;
189 	case MAX6621_SD_DIS:
190 		dev_dbg(dev, "Resource is disabled - err 0x%04x.\n", regval);
191 		return -EOPNOTSUPP;
192 	case MAX6621_ALERT_DIS:
193 		dev_dbg(dev, "No alert active - err 0x%04x.\n", regval);
194 		return -EOPNOTSUPP;
195 	default:
196 		return 0;
197 	}
198 }
199 
200 static int
201 max6621_read(struct device *dev, enum hwmon_sensor_types type, u32 attr,
202 	     int channel, long *val)
203 {
204 	struct max6621_data *data = dev_get_drvdata(dev);
205 	u32 regval;
206 	int reg;
207 	s8 temp;
208 	int ret;
209 
210 	switch (type) {
211 	case hwmon_temp:
212 		switch (attr) {
213 		case hwmon_temp_input:
214 			reg = data->input_chan2reg[channel];
215 			ret = regmap_read(data->regmap, reg, &regval);
216 			if (ret)
217 				return ret;
218 
219 			ret = max6621_verify_reg_data(dev, regval);
220 			if (ret)
221 				return ret;
222 
223 			/*
224 			 * Bit MAX6621_REG_TEMP_SHIFT represents 1 degree step.
225 			 * The temperature is given in two's complement and 8
226 			 * bits is used for the register conversion.
227 			 */
228 			temp = (regval >> MAX6621_REG_TEMP_SHIFT);
229 			*val = temp * 1000L;
230 
231 			break;
232 		case hwmon_temp_offset:
233 			ret = regmap_read(data->regmap, MAX6621_CONFIG2_REG,
234 					  &regval);
235 			if (ret)
236 				return ret;
237 
238 			ret = max6621_verify_reg_data(dev, regval);
239 			if (ret)
240 				return ret;
241 
242 			*val = (regval >> MAX6621_REG_TEMP_SHIFT) *
243 			       1000L;
244 
245 			break;
246 		case hwmon_temp_crit:
247 			channel -= MAX6621_TEMP_ALERT_CHAN_SHIFT;
248 			reg = max6621_temp_alert_chan2reg[channel];
249 			ret = regmap_read(data->regmap, reg, &regval);
250 			if (ret)
251 				return ret;
252 
253 			ret = max6621_verify_reg_data(dev, regval);
254 			if (ret)
255 				return ret;
256 
257 			*val = regval * 1000L;
258 
259 			break;
260 		case hwmon_temp_crit_alarm:
261 			/*
262 			 * Set val to zero to recover the case, when reading
263 			 * MAX6621_TEMP_ALERT_CAUSE_REG results in for example
264 			 * MAX6621_ALERT_DIS. Reading will return with error,
265 			 * but in such case alarm should be returned as 0.
266 			 */
267 			*val = 0;
268 			ret = regmap_read(data->regmap,
269 					  MAX6621_TEMP_ALERT_CAUSE_REG,
270 					  &regval);
271 			if (ret)
272 				return ret;
273 
274 			ret = max6621_verify_reg_data(dev, regval);
275 			if (ret) {
276 				/* Do not report error if alert is disabled. */
277 				if (regval == MAX6621_ALERT_DIS)
278 					return 0;
279 				else
280 					return ret;
281 			}
282 
283 			/*
284 			 * Clear the alert automatically, using send-byte
285 			 * smbus protocol for clearing alert.
286 			 */
287 			if (regval) {
288 				ret = i2c_smbus_write_byte(data->client,
289 						MAX6621_CLEAR_ALERT_REG);
290 				if (ret)
291 					return ret;
292 			}
293 
294 			*val = !!regval;
295 
296 			break;
297 		default:
298 			return -EOPNOTSUPP;
299 		}
300 		break;
301 
302 	default:
303 		return -EOPNOTSUPP;
304 	}
305 
306 	return 0;
307 }
308 
309 static int
310 max6621_write(struct device *dev, enum hwmon_sensor_types type, u32 attr,
311 	      int channel, long val)
312 {
313 	struct max6621_data *data = dev_get_drvdata(dev);
314 	u32 reg;
315 
316 	switch (type) {
317 	case hwmon_temp:
318 		switch (attr) {
319 		case hwmon_temp_offset:
320 			/* Clamp to allowed range to prevent overflow. */
321 			val = clamp_val(val, MAX6621_TEMP_INPUT_MIN,
322 					MAX6621_TEMP_INPUT_MAX);
323 			val = max6621_temp_mc2reg(val);
324 
325 			return regmap_write(data->regmap,
326 					    MAX6621_CONFIG2_REG, val);
327 		case hwmon_temp_crit:
328 			channel -= MAX6621_TEMP_ALERT_CHAN_SHIFT;
329 			reg = max6621_temp_alert_chan2reg[channel];
330 			/* Clamp to allowed range to prevent overflow. */
331 			val = clamp_val(val, MAX6621_TEMP_INPUT_MIN,
332 					MAX6621_TEMP_INPUT_MAX);
333 			val = val / 1000L;
334 
335 			return regmap_write(data->regmap, reg, val);
336 		default:
337 			return -EOPNOTSUPP;
338 		}
339 		break;
340 
341 	default:
342 		return -EOPNOTSUPP;
343 	}
344 
345 	return -EOPNOTSUPP;
346 }
347 
348 static int
349 max6621_read_string(struct device *dev, enum hwmon_sensor_types type, u32 attr,
350 		    int channel, const char **str)
351 {
352 	switch (type) {
353 	case hwmon_temp:
354 		switch (attr) {
355 		case hwmon_temp_label:
356 			*str = max6621_temp_labels[channel];
357 			return 0;
358 		default:
359 			return -EOPNOTSUPP;
360 		}
361 		break;
362 	default:
363 		return -EOPNOTSUPP;
364 	}
365 
366 	return -EOPNOTSUPP;
367 }
368 
369 static bool max6621_writeable_reg(struct device *dev, unsigned int reg)
370 {
371 	switch (reg) {
372 	case MAX6621_CONFIG0_REG:
373 	case MAX6621_CONFIG1_REG:
374 	case MAX6621_CONFIG2_REG:
375 	case MAX6621_CONFIG3_REG:
376 	case MAX6621_TEMP_S0_ALERT_REG:
377 	case MAX6621_TEMP_S1_ALERT_REG:
378 	case MAX6621_TEMP_S2_ALERT_REG:
379 	case MAX6621_TEMP_S3_ALERT_REG:
380 	case MAX6621_TEMP_ALERT_CAUSE_REG:
381 		return true;
382 	}
383 	return false;
384 }
385 
386 static bool max6621_readable_reg(struct device *dev, unsigned int reg)
387 {
388 	switch (reg) {
389 	case MAX6621_TEMP_S0D0_REG:
390 	case MAX6621_TEMP_S0D1_REG:
391 	case MAX6621_TEMP_S1D0_REG:
392 	case MAX6621_TEMP_S1D1_REG:
393 	case MAX6621_TEMP_S2D0_REG:
394 	case MAX6621_TEMP_S2D1_REG:
395 	case MAX6621_TEMP_S3D0_REG:
396 	case MAX6621_TEMP_S3D1_REG:
397 	case MAX6621_TEMP_MAX_REG:
398 	case MAX6621_TEMP_MAX_ADDR_REG:
399 	case MAX6621_CONFIG0_REG:
400 	case MAX6621_CONFIG1_REG:
401 	case MAX6621_CONFIG2_REG:
402 	case MAX6621_CONFIG3_REG:
403 	case MAX6621_TEMP_S0_ALERT_REG:
404 	case MAX6621_TEMP_S1_ALERT_REG:
405 	case MAX6621_TEMP_S2_ALERT_REG:
406 	case MAX6621_TEMP_S3_ALERT_REG:
407 		return true;
408 	}
409 	return false;
410 }
411 
412 static bool max6621_volatile_reg(struct device *dev, unsigned int reg)
413 {
414 	switch (reg) {
415 	case MAX6621_TEMP_S0D0_REG:
416 	case MAX6621_TEMP_S0D1_REG:
417 	case MAX6621_TEMP_S1D0_REG:
418 	case MAX6621_TEMP_S1D1_REG:
419 	case MAX6621_TEMP_S2D0_REG:
420 	case MAX6621_TEMP_S2D1_REG:
421 	case MAX6621_TEMP_S3D0_REG:
422 	case MAX6621_TEMP_S3D1_REG:
423 	case MAX6621_TEMP_MAX_REG:
424 	case MAX6621_TEMP_S0_ALERT_REG:
425 	case MAX6621_TEMP_S1_ALERT_REG:
426 	case MAX6621_TEMP_S2_ALERT_REG:
427 	case MAX6621_TEMP_S3_ALERT_REG:
428 	case MAX6621_TEMP_ALERT_CAUSE_REG:
429 		return true;
430 	}
431 	return false;
432 }
433 
434 static const struct reg_default max6621_regmap_default[] = {
435 	{ MAX6621_CONFIG0_REG, MAX6621_CONFIG0_INIT },
436 	{ MAX6621_CONFIG1_REG, MAX6621_CONFIG1_INIT },
437 };
438 
439 static const struct regmap_config max6621_regmap_config = {
440 	.reg_bits = 8,
441 	.val_bits = 16,
442 	.max_register = MAX6621_REG_MAX,
443 	.val_format_endian = REGMAP_ENDIAN_LITTLE,
444 	.cache_type = REGCACHE_FLAT,
445 	.writeable_reg = max6621_writeable_reg,
446 	.readable_reg = max6621_readable_reg,
447 	.volatile_reg = max6621_volatile_reg,
448 	.reg_defaults = max6621_regmap_default,
449 	.num_reg_defaults = ARRAY_SIZE(max6621_regmap_default),
450 };
451 
452 static const struct hwmon_channel_info *max6621_info[] = {
453 	HWMON_CHANNEL_INFO(chip,
454 			   HWMON_C_REGISTER_TZ),
455 	HWMON_CHANNEL_INFO(temp,
456 			   HWMON_T_INPUT | HWMON_T_LABEL | HWMON_T_OFFSET,
457 			   HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL,
458 			   HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL,
459 			   HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL,
460 			   HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_CRIT_ALARM | HWMON_T_LABEL,
461 			   HWMON_T_INPUT | HWMON_T_LABEL,
462 			   HWMON_T_INPUT | HWMON_T_LABEL,
463 			   HWMON_T_INPUT | HWMON_T_LABEL,
464 			   HWMON_T_INPUT | HWMON_T_LABEL),
465 	NULL
466 };
467 
468 static const struct hwmon_ops max6621_hwmon_ops = {
469 	.read = max6621_read,
470 	.write = max6621_write,
471 	.read_string = max6621_read_string,
472 	.is_visible = max6621_is_visible,
473 };
474 
475 static const struct hwmon_chip_info max6621_chip_info = {
476 	.ops = &max6621_hwmon_ops,
477 	.info = max6621_info,
478 };
479 
480 static int max6621_probe(struct i2c_client *client,
481 			 const struct i2c_device_id *id)
482 {
483 	struct device *dev = &client->dev;
484 	struct max6621_data *data;
485 	struct device *hwmon_dev;
486 	int i;
487 	int ret;
488 
489 	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
490 	if (!data)
491 		return -ENOMEM;
492 
493 	data->regmap = devm_regmap_init_i2c(client, &max6621_regmap_config);
494 	if (IS_ERR(data->regmap))
495 		return PTR_ERR(data->regmap);
496 
497 	i2c_set_clientdata(client, data);
498 	data->client = client;
499 
500 	/* Set CONFIG0 register masking temperature alerts and PEC. */
501 	ret = regmap_write(data->regmap, MAX6621_CONFIG0_REG,
502 			   MAX6621_CONFIG0_INIT);
503 	if (ret)
504 		return ret;
505 
506 	/* Set CONFIG1 register for PEC access retry number. */
507 	ret = regmap_write(data->regmap, MAX6621_CONFIG1_REG,
508 			   MAX6621_CONFIG1_INIT);
509 	if (ret)
510 		return ret;
511 
512 	/* Sync registers with hardware. */
513 	regcache_mark_dirty(data->regmap);
514 	ret = regcache_sync(data->regmap);
515 	if (ret)
516 		return ret;
517 
518 	/* Verify which temperature input registers are enabled. */
519 	for (i = 0; i < MAX6621_TEMP_INPUT_REG_NUM; i++) {
520 		ret = i2c_smbus_read_word_data(client, max6621_temp_regs[i]);
521 		if (ret < 0)
522 			return ret;
523 		ret = max6621_verify_reg_data(dev, ret);
524 		if (ret) {
525 			data->input_chan2reg[i] = -1;
526 			continue;
527 		}
528 
529 		data->input_chan2reg[i] = max6621_temp_regs[i];
530 	}
531 
532 	hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
533 							 data,
534 							 &max6621_chip_info,
535 							 NULL);
536 
537 	return PTR_ERR_OR_ZERO(hwmon_dev);
538 }
539 
540 static const struct i2c_device_id max6621_id[] = {
541 	{ MAX6621_DRV_NAME, 0 },
542 	{ }
543 };
544 MODULE_DEVICE_TABLE(i2c, max6621_id);
545 
546 static const struct of_device_id __maybe_unused max6621_of_match[] = {
547 	{ .compatible = "maxim,max6621" },
548 	{ }
549 };
550 MODULE_DEVICE_TABLE(of, max6621_of_match);
551 
552 static struct i2c_driver max6621_driver = {
553 	.class		= I2C_CLASS_HWMON,
554 	.driver = {
555 		.name = MAX6621_DRV_NAME,
556 		.of_match_table = of_match_ptr(max6621_of_match),
557 	},
558 	.probe		= max6621_probe,
559 	.id_table	= max6621_id,
560 };
561 
562 module_i2c_driver(max6621_driver);
563 
564 MODULE_AUTHOR("Vadim Pasternak <vadimp@mellanox.com>");
565 MODULE_DESCRIPTION("Driver for Maxim MAX6621");
566 MODULE_LICENSE("GPL");
567