1 /* 2 * max1619.c - Part of lm_sensors, Linux kernel modules for hardware 3 * monitoring 4 * Copyright (C) 2003-2004 Oleksij Rempel <bug-track@fisher-privat.net> 5 * Jean Delvare <jdelvare@suse.de> 6 * 7 * Based on the lm90 driver. The MAX1619 is a sensor chip made by Maxim. 8 * It reports up to two temperatures (its own plus up to 9 * one external one). Complete datasheet can be 10 * obtained from Maxim's website at: 11 * http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf 12 * 13 * This program is free software; you can redistribute it and/or modify 14 * it under the terms of the GNU General Public License as published by 15 * the Free Software Foundation; either version 2 of the License, or 16 * (at your option) any later version. 17 * 18 * This program is distributed in the hope that it will be useful, 19 * but WITHOUT ANY WARRANTY; without even the implied warranty of 20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 21 * GNU General Public License for more details. 22 * 23 * You should have received a copy of the GNU General Public License 24 * along with this program; if not, write to the Free Software 25 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 26 */ 27 28 29 #include <linux/module.h> 30 #include <linux/init.h> 31 #include <linux/slab.h> 32 #include <linux/jiffies.h> 33 #include <linux/i2c.h> 34 #include <linux/hwmon.h> 35 #include <linux/hwmon-sysfs.h> 36 #include <linux/err.h> 37 #include <linux/mutex.h> 38 #include <linux/sysfs.h> 39 40 static const unsigned short normal_i2c[] = { 41 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; 42 43 /* 44 * The MAX1619 registers 45 */ 46 47 #define MAX1619_REG_R_MAN_ID 0xFE 48 #define MAX1619_REG_R_CHIP_ID 0xFF 49 #define MAX1619_REG_R_CONFIG 0x03 50 #define MAX1619_REG_W_CONFIG 0x09 51 #define MAX1619_REG_R_CONVRATE 0x04 52 #define MAX1619_REG_W_CONVRATE 0x0A 53 #define MAX1619_REG_R_STATUS 0x02 54 #define MAX1619_REG_R_LOCAL_TEMP 0x00 55 #define MAX1619_REG_R_REMOTE_TEMP 0x01 56 #define MAX1619_REG_R_REMOTE_HIGH 0x07 57 #define MAX1619_REG_W_REMOTE_HIGH 0x0D 58 #define MAX1619_REG_R_REMOTE_LOW 0x08 59 #define MAX1619_REG_W_REMOTE_LOW 0x0E 60 #define MAX1619_REG_R_REMOTE_CRIT 0x10 61 #define MAX1619_REG_W_REMOTE_CRIT 0x12 62 #define MAX1619_REG_R_TCRIT_HYST 0x11 63 #define MAX1619_REG_W_TCRIT_HYST 0x13 64 65 /* 66 * Conversions 67 */ 68 69 static int temp_from_reg(int val) 70 { 71 return (val & 0x80 ? val-0x100 : val) * 1000; 72 } 73 74 static int temp_to_reg(int val) 75 { 76 return (val < 0 ? val+0x100*1000 : val) / 1000; 77 } 78 79 /* 80 * Functions declaration 81 */ 82 83 static int max1619_probe(struct i2c_client *client, 84 const struct i2c_device_id *id); 85 static int max1619_detect(struct i2c_client *client, 86 struct i2c_board_info *info); 87 static void max1619_init_client(struct i2c_client *client); 88 static int max1619_remove(struct i2c_client *client); 89 static struct max1619_data *max1619_update_device(struct device *dev); 90 91 /* 92 * Driver data (common to all clients) 93 */ 94 95 static const struct i2c_device_id max1619_id[] = { 96 { "max1619", 0 }, 97 { } 98 }; 99 MODULE_DEVICE_TABLE(i2c, max1619_id); 100 101 static struct i2c_driver max1619_driver = { 102 .class = I2C_CLASS_HWMON, 103 .driver = { 104 .name = "max1619", 105 }, 106 .probe = max1619_probe, 107 .remove = max1619_remove, 108 .id_table = max1619_id, 109 .detect = max1619_detect, 110 .address_list = normal_i2c, 111 }; 112 113 /* 114 * Client data (each client gets its own) 115 */ 116 117 struct max1619_data { 118 struct device *hwmon_dev; 119 struct mutex update_lock; 120 char valid; /* zero until following fields are valid */ 121 unsigned long last_updated; /* in jiffies */ 122 123 /* registers values */ 124 u8 temp_input1; /* local */ 125 u8 temp_input2, temp_low2, temp_high2; /* remote */ 126 u8 temp_crit2; 127 u8 temp_hyst2; 128 u8 alarms; 129 }; 130 131 /* 132 * Sysfs stuff 133 */ 134 135 #define show_temp(value) \ 136 static ssize_t show_##value(struct device *dev, struct device_attribute *attr, \ 137 char *buf) \ 138 { \ 139 struct max1619_data *data = max1619_update_device(dev); \ 140 return sprintf(buf, "%d\n", temp_from_reg(data->value)); \ 141 } 142 show_temp(temp_input1); 143 show_temp(temp_input2); 144 show_temp(temp_low2); 145 show_temp(temp_high2); 146 show_temp(temp_crit2); 147 show_temp(temp_hyst2); 148 149 #define set_temp2(value, reg) \ 150 static ssize_t set_##value(struct device *dev, struct device_attribute *attr, \ 151 const char *buf, \ 152 size_t count) \ 153 { \ 154 struct i2c_client *client = to_i2c_client(dev); \ 155 struct max1619_data *data = i2c_get_clientdata(client); \ 156 long val; \ 157 int err = kstrtol(buf, 10, &val); \ 158 if (err) \ 159 return err; \ 160 \ 161 mutex_lock(&data->update_lock); \ 162 data->value = temp_to_reg(val); \ 163 i2c_smbus_write_byte_data(client, reg, data->value); \ 164 mutex_unlock(&data->update_lock); \ 165 return count; \ 166 } 167 168 set_temp2(temp_low2, MAX1619_REG_W_REMOTE_LOW); 169 set_temp2(temp_high2, MAX1619_REG_W_REMOTE_HIGH); 170 set_temp2(temp_crit2, MAX1619_REG_W_REMOTE_CRIT); 171 set_temp2(temp_hyst2, MAX1619_REG_W_TCRIT_HYST); 172 173 static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, 174 char *buf) 175 { 176 struct max1619_data *data = max1619_update_device(dev); 177 return sprintf(buf, "%d\n", data->alarms); 178 } 179 180 static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, 181 char *buf) 182 { 183 int bitnr = to_sensor_dev_attr(attr)->index; 184 struct max1619_data *data = max1619_update_device(dev); 185 return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1); 186 } 187 188 static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input1, NULL); 189 static DEVICE_ATTR(temp2_input, S_IRUGO, show_temp_input2, NULL); 190 static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_low2, 191 set_temp_low2); 192 static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_high2, 193 set_temp_high2); 194 static DEVICE_ATTR(temp2_crit, S_IWUSR | S_IRUGO, show_temp_crit2, 195 set_temp_crit2); 196 static DEVICE_ATTR(temp2_crit_hyst, S_IWUSR | S_IRUGO, show_temp_hyst2, 197 set_temp_hyst2); 198 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); 199 static SENSOR_DEVICE_ATTR(temp2_crit_alarm, S_IRUGO, show_alarm, NULL, 1); 200 static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2); 201 static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3); 202 static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4); 203 204 static struct attribute *max1619_attributes[] = { 205 &dev_attr_temp1_input.attr, 206 &dev_attr_temp2_input.attr, 207 &dev_attr_temp2_min.attr, 208 &dev_attr_temp2_max.attr, 209 &dev_attr_temp2_crit.attr, 210 &dev_attr_temp2_crit_hyst.attr, 211 212 &dev_attr_alarms.attr, 213 &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr, 214 &sensor_dev_attr_temp2_fault.dev_attr.attr, 215 &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, 216 &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, 217 NULL 218 }; 219 220 static const struct attribute_group max1619_group = { 221 .attrs = max1619_attributes, 222 }; 223 224 /* 225 * Real code 226 */ 227 228 /* Return 0 if detection is successful, -ENODEV otherwise */ 229 static int max1619_detect(struct i2c_client *client, 230 struct i2c_board_info *info) 231 { 232 struct i2c_adapter *adapter = client->adapter; 233 u8 reg_config, reg_convrate, reg_status, man_id, chip_id; 234 235 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) 236 return -ENODEV; 237 238 /* detection */ 239 reg_config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG); 240 reg_convrate = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONVRATE); 241 reg_status = i2c_smbus_read_byte_data(client, MAX1619_REG_R_STATUS); 242 if ((reg_config & 0x03) != 0x00 243 || reg_convrate > 0x07 || (reg_status & 0x61) != 0x00) { 244 dev_dbg(&adapter->dev, "MAX1619 detection failed at 0x%02x\n", 245 client->addr); 246 return -ENODEV; 247 } 248 249 /* identification */ 250 man_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_MAN_ID); 251 chip_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CHIP_ID); 252 if (man_id != 0x4D || chip_id != 0x04) { 253 dev_info(&adapter->dev, 254 "Unsupported chip (man_id=0x%02X, chip_id=0x%02X).\n", 255 man_id, chip_id); 256 return -ENODEV; 257 } 258 259 strlcpy(info->type, "max1619", I2C_NAME_SIZE); 260 261 return 0; 262 } 263 264 static int max1619_probe(struct i2c_client *new_client, 265 const struct i2c_device_id *id) 266 { 267 struct max1619_data *data; 268 int err; 269 270 data = devm_kzalloc(&new_client->dev, sizeof(struct max1619_data), 271 GFP_KERNEL); 272 if (!data) 273 return -ENOMEM; 274 275 i2c_set_clientdata(new_client, data); 276 data->valid = 0; 277 mutex_init(&data->update_lock); 278 279 /* Initialize the MAX1619 chip */ 280 max1619_init_client(new_client); 281 282 /* Register sysfs hooks */ 283 err = sysfs_create_group(&new_client->dev.kobj, &max1619_group); 284 if (err) 285 return err; 286 287 data->hwmon_dev = hwmon_device_register(&new_client->dev); 288 if (IS_ERR(data->hwmon_dev)) { 289 err = PTR_ERR(data->hwmon_dev); 290 goto exit_remove_files; 291 } 292 293 return 0; 294 295 exit_remove_files: 296 sysfs_remove_group(&new_client->dev.kobj, &max1619_group); 297 return err; 298 } 299 300 static void max1619_init_client(struct i2c_client *client) 301 { 302 u8 config; 303 304 /* 305 * Start the conversions. 306 */ 307 i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONVRATE, 308 5); /* 2 Hz */ 309 config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG); 310 if (config & 0x40) 311 i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONFIG, 312 config & 0xBF); /* run */ 313 } 314 315 static int max1619_remove(struct i2c_client *client) 316 { 317 struct max1619_data *data = i2c_get_clientdata(client); 318 319 hwmon_device_unregister(data->hwmon_dev); 320 sysfs_remove_group(&client->dev.kobj, &max1619_group); 321 322 return 0; 323 } 324 325 static struct max1619_data *max1619_update_device(struct device *dev) 326 { 327 struct i2c_client *client = to_i2c_client(dev); 328 struct max1619_data *data = i2c_get_clientdata(client); 329 330 mutex_lock(&data->update_lock); 331 332 if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { 333 dev_dbg(&client->dev, "Updating max1619 data.\n"); 334 data->temp_input1 = i2c_smbus_read_byte_data(client, 335 MAX1619_REG_R_LOCAL_TEMP); 336 data->temp_input2 = i2c_smbus_read_byte_data(client, 337 MAX1619_REG_R_REMOTE_TEMP); 338 data->temp_high2 = i2c_smbus_read_byte_data(client, 339 MAX1619_REG_R_REMOTE_HIGH); 340 data->temp_low2 = i2c_smbus_read_byte_data(client, 341 MAX1619_REG_R_REMOTE_LOW); 342 data->temp_crit2 = i2c_smbus_read_byte_data(client, 343 MAX1619_REG_R_REMOTE_CRIT); 344 data->temp_hyst2 = i2c_smbus_read_byte_data(client, 345 MAX1619_REG_R_TCRIT_HYST); 346 data->alarms = i2c_smbus_read_byte_data(client, 347 MAX1619_REG_R_STATUS); 348 349 data->last_updated = jiffies; 350 data->valid = 1; 351 } 352 353 mutex_unlock(&data->update_lock); 354 355 return data; 356 } 357 358 module_i2c_driver(max1619_driver); 359 360 MODULE_AUTHOR("Oleksij Rempel <bug-track@fisher-privat.net>, Jean Delvare <jdelvare@suse.de>"); 361 MODULE_DESCRIPTION("MAX1619 sensor driver"); 362 MODULE_LICENSE("GPL"); 363