xref: /openbmc/linux/drivers/hwmon/max1619.c (revision 9a8f3203)
1 /*
2  * max1619.c - Part of lm_sensors, Linux kernel modules for hardware
3  *             monitoring
4  * Copyright (C) 2003-2004 Oleksij Rempel <bug-track@fisher-privat.net>
5  *                         Jean Delvare <jdelvare@suse.de>
6  *
7  * Based on the lm90 driver. The MAX1619 is a sensor chip made by Maxim.
8  * It reports up to two temperatures (its own plus up to
9  * one external one). Complete datasheet can be
10  * obtained from Maxim's website at:
11  *   http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf
12  *
13  * This program is free software; you can redistribute it and/or modify
14  * it under the terms of the GNU General Public License as published by
15  * the Free Software Foundation; either version 2 of the License, or
16  * (at your option) any later version.
17  *
18  * This program is distributed in the hope that it will be useful,
19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21  * GNU General Public License for more details.
22  */
23 
24 #include <linux/module.h>
25 #include <linux/init.h>
26 #include <linux/slab.h>
27 #include <linux/jiffies.h>
28 #include <linux/i2c.h>
29 #include <linux/hwmon.h>
30 #include <linux/hwmon-sysfs.h>
31 #include <linux/err.h>
32 #include <linux/mutex.h>
33 #include <linux/sysfs.h>
34 
35 static const unsigned short normal_i2c[] = {
36 	0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
37 
38 /*
39  * The MAX1619 registers
40  */
41 
42 #define MAX1619_REG_R_MAN_ID		0xFE
43 #define MAX1619_REG_R_CHIP_ID		0xFF
44 #define MAX1619_REG_R_CONFIG		0x03
45 #define MAX1619_REG_W_CONFIG		0x09
46 #define MAX1619_REG_R_CONVRATE		0x04
47 #define MAX1619_REG_W_CONVRATE		0x0A
48 #define MAX1619_REG_R_STATUS		0x02
49 #define MAX1619_REG_R_LOCAL_TEMP	0x00
50 #define MAX1619_REG_R_REMOTE_TEMP	0x01
51 #define MAX1619_REG_R_REMOTE_HIGH	0x07
52 #define MAX1619_REG_W_REMOTE_HIGH	0x0D
53 #define MAX1619_REG_R_REMOTE_LOW	0x08
54 #define MAX1619_REG_W_REMOTE_LOW	0x0E
55 #define MAX1619_REG_R_REMOTE_CRIT	0x10
56 #define MAX1619_REG_W_REMOTE_CRIT	0x12
57 #define MAX1619_REG_R_TCRIT_HYST	0x11
58 #define MAX1619_REG_W_TCRIT_HYST	0x13
59 
60 /*
61  * Conversions
62  */
63 
64 static int temp_from_reg(int val)
65 {
66 	return (val & 0x80 ? val-0x100 : val) * 1000;
67 }
68 
69 static int temp_to_reg(int val)
70 {
71 	return (val < 0 ? val+0x100*1000 : val) / 1000;
72 }
73 
74 enum temp_index {
75 	t_input1 = 0,
76 	t_input2,
77 	t_low2,
78 	t_high2,
79 	t_crit2,
80 	t_hyst2,
81 	t_num_regs
82 };
83 
84 /*
85  * Client data (each client gets its own)
86  */
87 
88 struct max1619_data {
89 	struct i2c_client *client;
90 	struct mutex update_lock;
91 	char valid; /* zero until following fields are valid */
92 	unsigned long last_updated; /* in jiffies */
93 
94 	/* registers values */
95 	u8 temp[t_num_regs];	/* index with enum temp_index */
96 	u8 alarms;
97 };
98 
99 static const u8 regs_read[t_num_regs] = {
100 	[t_input1] = MAX1619_REG_R_LOCAL_TEMP,
101 	[t_input2] = MAX1619_REG_R_REMOTE_TEMP,
102 	[t_low2] = MAX1619_REG_R_REMOTE_LOW,
103 	[t_high2] = MAX1619_REG_R_REMOTE_HIGH,
104 	[t_crit2] = MAX1619_REG_R_REMOTE_CRIT,
105 	[t_hyst2] = MAX1619_REG_R_TCRIT_HYST,
106 };
107 
108 static const u8 regs_write[t_num_regs] = {
109 	[t_low2] = MAX1619_REG_W_REMOTE_LOW,
110 	[t_high2] = MAX1619_REG_W_REMOTE_HIGH,
111 	[t_crit2] = MAX1619_REG_W_REMOTE_CRIT,
112 	[t_hyst2] = MAX1619_REG_W_TCRIT_HYST,
113 };
114 
115 static struct max1619_data *max1619_update_device(struct device *dev)
116 {
117 	struct max1619_data *data = dev_get_drvdata(dev);
118 	struct i2c_client *client = data->client;
119 	int config, i;
120 
121 	mutex_lock(&data->update_lock);
122 
123 	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
124 		dev_dbg(&client->dev, "Updating max1619 data.\n");
125 		for (i = 0; i < t_num_regs; i++)
126 			data->temp[i] = i2c_smbus_read_byte_data(client,
127 					regs_read[i]);
128 		data->alarms = i2c_smbus_read_byte_data(client,
129 					MAX1619_REG_R_STATUS);
130 		/* If OVERT polarity is low, reverse alarm bit */
131 		config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG);
132 		if (!(config & 0x20))
133 			data->alarms ^= 0x02;
134 
135 		data->last_updated = jiffies;
136 		data->valid = 1;
137 	}
138 
139 	mutex_unlock(&data->update_lock);
140 
141 	return data;
142 }
143 
144 /*
145  * Sysfs stuff
146  */
147 
148 static ssize_t temp_show(struct device *dev, struct device_attribute *devattr,
149 			 char *buf)
150 {
151 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
152 	struct max1619_data *data = max1619_update_device(dev);
153 
154 	return sprintf(buf, "%d\n", temp_from_reg(data->temp[attr->index]));
155 }
156 
157 static ssize_t temp_store(struct device *dev,
158 			  struct device_attribute *devattr, const char *buf,
159 			  size_t count)
160 {
161 	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
162 	struct max1619_data *data = dev_get_drvdata(dev);
163 	struct i2c_client *client = data->client;
164 	long val;
165 	int err = kstrtol(buf, 10, &val);
166 	if (err)
167 		return err;
168 
169 	mutex_lock(&data->update_lock);
170 	data->temp[attr->index] = temp_to_reg(val);
171 	i2c_smbus_write_byte_data(client, regs_write[attr->index],
172 				  data->temp[attr->index]);
173 	mutex_unlock(&data->update_lock);
174 	return count;
175 }
176 
177 static ssize_t alarms_show(struct device *dev, struct device_attribute *attr,
178 			   char *buf)
179 {
180 	struct max1619_data *data = max1619_update_device(dev);
181 	return sprintf(buf, "%d\n", data->alarms);
182 }
183 
184 static ssize_t alarm_show(struct device *dev, struct device_attribute *attr,
185 			  char *buf)
186 {
187 	int bitnr = to_sensor_dev_attr(attr)->index;
188 	struct max1619_data *data = max1619_update_device(dev);
189 	return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1);
190 }
191 
192 static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, t_input1);
193 static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, t_input2);
194 static SENSOR_DEVICE_ATTR_RW(temp2_min, temp, t_low2);
195 static SENSOR_DEVICE_ATTR_RW(temp2_max, temp, t_high2);
196 static SENSOR_DEVICE_ATTR_RW(temp2_crit, temp, t_crit2);
197 static SENSOR_DEVICE_ATTR_RW(temp2_crit_hyst, temp, t_hyst2);
198 
199 static DEVICE_ATTR_RO(alarms);
200 static SENSOR_DEVICE_ATTR_RO(temp2_crit_alarm, alarm, 1);
201 static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, 2);
202 static SENSOR_DEVICE_ATTR_RO(temp2_min_alarm, alarm, 3);
203 static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, alarm, 4);
204 
205 static struct attribute *max1619_attrs[] = {
206 	&sensor_dev_attr_temp1_input.dev_attr.attr,
207 	&sensor_dev_attr_temp2_input.dev_attr.attr,
208 	&sensor_dev_attr_temp2_min.dev_attr.attr,
209 	&sensor_dev_attr_temp2_max.dev_attr.attr,
210 	&sensor_dev_attr_temp2_crit.dev_attr.attr,
211 	&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
212 
213 	&dev_attr_alarms.attr,
214 	&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
215 	&sensor_dev_attr_temp2_fault.dev_attr.attr,
216 	&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
217 	&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
218 	NULL
219 };
220 ATTRIBUTE_GROUPS(max1619);
221 
222 /* Return 0 if detection is successful, -ENODEV otherwise */
223 static int max1619_detect(struct i2c_client *client,
224 			  struct i2c_board_info *info)
225 {
226 	struct i2c_adapter *adapter = client->adapter;
227 	u8 reg_config, reg_convrate, reg_status, man_id, chip_id;
228 
229 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
230 		return -ENODEV;
231 
232 	/* detection */
233 	reg_config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG);
234 	reg_convrate = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONVRATE);
235 	reg_status = i2c_smbus_read_byte_data(client, MAX1619_REG_R_STATUS);
236 	if ((reg_config & 0x03) != 0x00
237 	 || reg_convrate > 0x07 || (reg_status & 0x61) != 0x00) {
238 		dev_dbg(&adapter->dev, "MAX1619 detection failed at 0x%02x\n",
239 			client->addr);
240 		return -ENODEV;
241 	}
242 
243 	/* identification */
244 	man_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_MAN_ID);
245 	chip_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CHIP_ID);
246 	if (man_id != 0x4D || chip_id != 0x04) {
247 		dev_info(&adapter->dev,
248 			 "Unsupported chip (man_id=0x%02X, chip_id=0x%02X).\n",
249 			 man_id, chip_id);
250 		return -ENODEV;
251 	}
252 
253 	strlcpy(info->type, "max1619", I2C_NAME_SIZE);
254 
255 	return 0;
256 }
257 
258 static void max1619_init_client(struct i2c_client *client)
259 {
260 	u8 config;
261 
262 	/*
263 	 * Start the conversions.
264 	 */
265 	i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONVRATE,
266 				  5); /* 2 Hz */
267 	config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG);
268 	if (config & 0x40)
269 		i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONFIG,
270 					  config & 0xBF); /* run */
271 }
272 
273 static int max1619_probe(struct i2c_client *new_client,
274 			 const struct i2c_device_id *id)
275 {
276 	struct max1619_data *data;
277 	struct device *hwmon_dev;
278 
279 	data = devm_kzalloc(&new_client->dev, sizeof(struct max1619_data),
280 			    GFP_KERNEL);
281 	if (!data)
282 		return -ENOMEM;
283 
284 	data->client = new_client;
285 	mutex_init(&data->update_lock);
286 
287 	/* Initialize the MAX1619 chip */
288 	max1619_init_client(new_client);
289 
290 	hwmon_dev = devm_hwmon_device_register_with_groups(&new_client->dev,
291 							   new_client->name,
292 							   data,
293 							   max1619_groups);
294 	return PTR_ERR_OR_ZERO(hwmon_dev);
295 }
296 
297 static const struct i2c_device_id max1619_id[] = {
298 	{ "max1619", 0 },
299 	{ }
300 };
301 MODULE_DEVICE_TABLE(i2c, max1619_id);
302 
303 #ifdef CONFIG_OF
304 static const struct of_device_id max1619_of_match[] = {
305 	{ .compatible = "maxim,max1619", },
306 	{},
307 };
308 
309 MODULE_DEVICE_TABLE(of, max1619_of_match);
310 #endif
311 
312 static struct i2c_driver max1619_driver = {
313 	.class		= I2C_CLASS_HWMON,
314 	.driver = {
315 		.name	= "max1619",
316 		.of_match_table = of_match_ptr(max1619_of_match),
317 	},
318 	.probe		= max1619_probe,
319 	.id_table	= max1619_id,
320 	.detect		= max1619_detect,
321 	.address_list	= normal_i2c,
322 };
323 
324 module_i2c_driver(max1619_driver);
325 
326 MODULE_AUTHOR("Oleksij Rempel <bug-track@fisher-privat.net>, Jean Delvare <jdelvare@suse.de>");
327 MODULE_DESCRIPTION("MAX1619 sensor driver");
328 MODULE_LICENSE("GPL");
329