xref: /openbmc/linux/drivers/hwmon/lm95241.c (revision 9cdb81c7)
1 /*
2  * Copyright (C) 2008, 2010 Davide Rizzo <elpa.rizzo@gmail.com>
3  *
4  * The LM95241 is a sensor chip made by National Semiconductors.
5  * It reports up to three temperatures (its own plus up to two external ones).
6  * Complete datasheet can be obtained from National's website at:
7  *   http://www.national.com/ds.cgi/LM/LM95241.pdf
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License as published by
11  * the Free Software Foundation; either version 2 of the License, or
12  * (at your option) any later version.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  * GNU General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
22  */
23 
24 #include <linux/module.h>
25 #include <linux/init.h>
26 #include <linux/slab.h>
27 #include <linux/jiffies.h>
28 #include <linux/i2c.h>
29 #include <linux/hwmon.h>
30 #include <linux/hwmon-sysfs.h>
31 #include <linux/err.h>
32 #include <linux/mutex.h>
33 #include <linux/sysfs.h>
34 
35 #define DEVNAME "lm95241"
36 
37 static const unsigned short normal_i2c[] = {
38 	0x19, 0x2a, 0x2b, I2C_CLIENT_END };
39 
40 /* LM95241 registers */
41 #define LM95241_REG_R_MAN_ID		0xFE
42 #define LM95241_REG_R_CHIP_ID		0xFF
43 #define LM95241_REG_R_STATUS		0x02
44 #define LM95241_REG_RW_CONFIG		0x03
45 #define LM95241_REG_RW_REM_FILTER	0x06
46 #define LM95241_REG_RW_TRUTHERM		0x07
47 #define LM95241_REG_W_ONE_SHOT		0x0F
48 #define LM95241_REG_R_LOCAL_TEMPH	0x10
49 #define LM95241_REG_R_REMOTE1_TEMPH	0x11
50 #define LM95241_REG_R_REMOTE2_TEMPH	0x12
51 #define LM95241_REG_R_LOCAL_TEMPL	0x20
52 #define LM95241_REG_R_REMOTE1_TEMPL	0x21
53 #define LM95241_REG_R_REMOTE2_TEMPL	0x22
54 #define LM95241_REG_RW_REMOTE_MODEL	0x30
55 
56 /* LM95241 specific bitfields */
57 #define CFG_STOP 0x40
58 #define CFG_CR0076 0x00
59 #define CFG_CR0182 0x10
60 #define CFG_CR1000 0x20
61 #define CFG_CR2700 0x30
62 #define R1MS_SHIFT 0
63 #define R2MS_SHIFT 2
64 #define R1MS_MASK (0x01 << (R1MS_SHIFT))
65 #define R2MS_MASK (0x01 << (R2MS_SHIFT))
66 #define R1DF_SHIFT 1
67 #define R2DF_SHIFT 2
68 #define R1DF_MASK (0x01 << (R1DF_SHIFT))
69 #define R2DF_MASK (0x01 << (R2DF_SHIFT))
70 #define R1FE_MASK 0x01
71 #define R2FE_MASK 0x05
72 #define TT1_SHIFT 0
73 #define TT2_SHIFT 4
74 #define TT_OFF 0
75 #define TT_ON 1
76 #define TT_MASK 7
77 #define NATSEMI_MAN_ID	0x01
78 #define LM95231_CHIP_ID	0xA1
79 #define LM95241_CHIP_ID	0xA4
80 
81 static const u8 lm95241_reg_address[] = {
82 	LM95241_REG_R_LOCAL_TEMPH,
83 	LM95241_REG_R_LOCAL_TEMPL,
84 	LM95241_REG_R_REMOTE1_TEMPH,
85 	LM95241_REG_R_REMOTE1_TEMPL,
86 	LM95241_REG_R_REMOTE2_TEMPH,
87 	LM95241_REG_R_REMOTE2_TEMPL
88 };
89 
90 /* Client data (each client gets its own) */
91 struct lm95241_data {
92 	struct device *hwmon_dev;
93 	struct mutex update_lock;
94 	unsigned long last_updated, interval;	/* in jiffies */
95 	char valid;		/* zero until following fields are valid */
96 	/* registers values */
97 	u8 temp[ARRAY_SIZE(lm95241_reg_address)];
98 	u8 config, model, trutherm;
99 };
100 
101 /* Conversions */
102 static int temp_from_reg_signed(u8 val_h, u8 val_l)
103 {
104 	s16 val_hl = (val_h << 8) | val_l;
105 	return val_hl * 1000 / 256;
106 }
107 
108 static int temp_from_reg_unsigned(u8 val_h, u8 val_l)
109 {
110 	u16 val_hl = (val_h << 8) | val_l;
111 	return val_hl * 1000 / 256;
112 }
113 
114 static struct lm95241_data *lm95241_update_device(struct device *dev)
115 {
116 	struct i2c_client *client = to_i2c_client(dev);
117 	struct lm95241_data *data = i2c_get_clientdata(client);
118 
119 	mutex_lock(&data->update_lock);
120 
121 	if (time_after(jiffies, data->last_updated + data->interval) ||
122 	    !data->valid) {
123 		int i;
124 
125 		dev_dbg(&client->dev, "Updating lm95241 data.\n");
126 		for (i = 0; i < ARRAY_SIZE(lm95241_reg_address); i++)
127 			data->temp[i]
128 			  = i2c_smbus_read_byte_data(client,
129 						     lm95241_reg_address[i]);
130 		data->last_updated = jiffies;
131 		data->valid = 1;
132 	}
133 
134 	mutex_unlock(&data->update_lock);
135 
136 	return data;
137 }
138 
139 /* Sysfs stuff */
140 static ssize_t show_input(struct device *dev, struct device_attribute *attr,
141 			  char *buf)
142 {
143 	struct lm95241_data *data = lm95241_update_device(dev);
144 	int index = to_sensor_dev_attr(attr)->index;
145 
146 	return snprintf(buf, PAGE_SIZE - 1, "%d\n",
147 			index == 0 || (data->config & (1 << (index / 2))) ?
148 		temp_from_reg_signed(data->temp[index], data->temp[index + 1]) :
149 		temp_from_reg_unsigned(data->temp[index],
150 				       data->temp[index + 1]));
151 }
152 
153 static ssize_t show_type(struct device *dev, struct device_attribute *attr,
154 			 char *buf)
155 {
156 	struct i2c_client *client = to_i2c_client(dev);
157 	struct lm95241_data *data = i2c_get_clientdata(client);
158 
159 	return snprintf(buf, PAGE_SIZE - 1,
160 		data->model & to_sensor_dev_attr(attr)->index ? "1\n" : "2\n");
161 }
162 
163 static ssize_t set_type(struct device *dev, struct device_attribute *attr,
164 			const char *buf, size_t count)
165 {
166 	struct i2c_client *client = to_i2c_client(dev);
167 	struct lm95241_data *data = i2c_get_clientdata(client);
168 	unsigned long val;
169 	int shift;
170 	u8 mask = to_sensor_dev_attr(attr)->index;
171 
172 	if (kstrtoul(buf, 10, &val) < 0)
173 		return -EINVAL;
174 	if (val != 1 && val != 2)
175 		return -EINVAL;
176 
177 	shift = mask == R1MS_MASK ? TT1_SHIFT : TT2_SHIFT;
178 
179 	mutex_lock(&data->update_lock);
180 
181 	data->trutherm &= ~(TT_MASK << shift);
182 	if (val == 1) {
183 		data->model |= mask;
184 		data->trutherm |= (TT_ON << shift);
185 	} else {
186 		data->model &= ~mask;
187 		data->trutherm |= (TT_OFF << shift);
188 	}
189 	data->valid = 0;
190 
191 	i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL,
192 				  data->model);
193 	i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM,
194 				  data->trutherm);
195 
196 	mutex_unlock(&data->update_lock);
197 
198 	return count;
199 }
200 
201 static ssize_t show_min(struct device *dev, struct device_attribute *attr,
202 			char *buf)
203 {
204 	struct i2c_client *client = to_i2c_client(dev);
205 	struct lm95241_data *data = i2c_get_clientdata(client);
206 
207 	return snprintf(buf, PAGE_SIZE - 1,
208 			data->config & to_sensor_dev_attr(attr)->index ?
209 			"-127000\n" : "0\n");
210 }
211 
212 static ssize_t set_min(struct device *dev, struct device_attribute *attr,
213 		       const char *buf, size_t count)
214 {
215 	struct i2c_client *client = to_i2c_client(dev);
216 	struct lm95241_data *data = i2c_get_clientdata(client);
217 	long val;
218 
219 	if (kstrtol(buf, 10, &val) < 0)
220 		return -EINVAL;
221 	if (val < -128000)
222 		return -EINVAL;
223 
224 	mutex_lock(&data->update_lock);
225 
226 	if (val < 0)
227 		data->config |= to_sensor_dev_attr(attr)->index;
228 	else
229 		data->config &= ~to_sensor_dev_attr(attr)->index;
230 	data->valid = 0;
231 
232 	i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config);
233 
234 	mutex_unlock(&data->update_lock);
235 
236 	return count;
237 }
238 
239 static ssize_t show_max(struct device *dev, struct device_attribute *attr,
240 			char *buf)
241 {
242 	struct i2c_client *client = to_i2c_client(dev);
243 	struct lm95241_data *data = i2c_get_clientdata(client);
244 
245 	return snprintf(buf, PAGE_SIZE - 1,
246 			data->config & to_sensor_dev_attr(attr)->index ?
247 			"127000\n" : "255000\n");
248 }
249 
250 static ssize_t set_max(struct device *dev, struct device_attribute *attr,
251 		       const char *buf, size_t count)
252 {
253 	struct i2c_client *client = to_i2c_client(dev);
254 	struct lm95241_data *data = i2c_get_clientdata(client);
255 	long val;
256 
257 	if (kstrtol(buf, 10, &val) < 0)
258 		return -EINVAL;
259 	if (val >= 256000)
260 		return -EINVAL;
261 
262 	mutex_lock(&data->update_lock);
263 
264 	if (val <= 127000)
265 		data->config |= to_sensor_dev_attr(attr)->index;
266 	else
267 		data->config &= ~to_sensor_dev_attr(attr)->index;
268 	data->valid = 0;
269 
270 	i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config);
271 
272 	mutex_unlock(&data->update_lock);
273 
274 	return count;
275 }
276 
277 static ssize_t show_interval(struct device *dev, struct device_attribute *attr,
278 			     char *buf)
279 {
280 	struct lm95241_data *data = lm95241_update_device(dev);
281 
282 	return snprintf(buf, PAGE_SIZE - 1, "%lu\n", 1000 * data->interval
283 			/ HZ);
284 }
285 
286 static ssize_t set_interval(struct device *dev, struct device_attribute *attr,
287 			    const char *buf, size_t count)
288 {
289 	struct i2c_client *client = to_i2c_client(dev);
290 	struct lm95241_data *data = i2c_get_clientdata(client);
291 	unsigned long val;
292 
293 	if (kstrtoul(buf, 10, &val) < 0)
294 		return -EINVAL;
295 
296 	data->interval = val * HZ / 1000;
297 
298 	return count;
299 }
300 
301 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_input, NULL, 0);
302 static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_input, NULL, 2);
303 static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_input, NULL, 4);
304 static SENSOR_DEVICE_ATTR(temp2_type, S_IWUSR | S_IRUGO, show_type, set_type,
305 			  R1MS_MASK);
306 static SENSOR_DEVICE_ATTR(temp3_type, S_IWUSR | S_IRUGO, show_type, set_type,
307 			  R2MS_MASK);
308 static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_min, set_min,
309 			  R1DF_MASK);
310 static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_min, set_min,
311 			  R2DF_MASK);
312 static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_max, set_max,
313 			  R1DF_MASK);
314 static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_max, set_max,
315 			  R2DF_MASK);
316 static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval,
317 		   set_interval);
318 
319 static struct attribute *lm95241_attributes[] = {
320 	&sensor_dev_attr_temp1_input.dev_attr.attr,
321 	&sensor_dev_attr_temp2_input.dev_attr.attr,
322 	&sensor_dev_attr_temp3_input.dev_attr.attr,
323 	&sensor_dev_attr_temp2_type.dev_attr.attr,
324 	&sensor_dev_attr_temp3_type.dev_attr.attr,
325 	&sensor_dev_attr_temp2_min.dev_attr.attr,
326 	&sensor_dev_attr_temp3_min.dev_attr.attr,
327 	&sensor_dev_attr_temp2_max.dev_attr.attr,
328 	&sensor_dev_attr_temp3_max.dev_attr.attr,
329 	&dev_attr_update_interval.attr,
330 	NULL
331 };
332 
333 static const struct attribute_group lm95241_group = {
334 	.attrs = lm95241_attributes,
335 };
336 
337 /* Return 0 if detection is successful, -ENODEV otherwise */
338 static int lm95241_detect(struct i2c_client *new_client,
339 			  struct i2c_board_info *info)
340 {
341 	struct i2c_adapter *adapter = new_client->adapter;
342 	const char *name;
343 	int mfg_id, chip_id;
344 
345 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
346 		return -ENODEV;
347 
348 	mfg_id = i2c_smbus_read_byte_data(new_client, LM95241_REG_R_MAN_ID);
349 	if (mfg_id != NATSEMI_MAN_ID)
350 		return -ENODEV;
351 
352 	chip_id = i2c_smbus_read_byte_data(new_client, LM95241_REG_R_CHIP_ID);
353 	switch (chip_id) {
354 	case LM95231_CHIP_ID:
355 		name = "lm95231";
356 		break;
357 	case LM95241_CHIP_ID:
358 		name = "lm95241";
359 		break;
360 	default:
361 		return -ENODEV;
362 	}
363 
364 	/* Fill the i2c board info */
365 	strlcpy(info->type, name, I2C_NAME_SIZE);
366 	return 0;
367 }
368 
369 static void lm95241_init_client(struct i2c_client *client)
370 {
371 	struct lm95241_data *data = i2c_get_clientdata(client);
372 
373 	data->interval = HZ;	/* 1 sec default */
374 	data->valid = 0;
375 	data->config = CFG_CR0076;
376 	data->model = 0;
377 	data->trutherm = (TT_OFF << TT1_SHIFT) | (TT_OFF << TT2_SHIFT);
378 
379 	i2c_smbus_write_byte_data(client, LM95241_REG_RW_CONFIG, data->config);
380 	i2c_smbus_write_byte_data(client, LM95241_REG_RW_REM_FILTER,
381 				  R1FE_MASK | R2FE_MASK);
382 	i2c_smbus_write_byte_data(client, LM95241_REG_RW_TRUTHERM,
383 				  data->trutherm);
384 	i2c_smbus_write_byte_data(client, LM95241_REG_RW_REMOTE_MODEL,
385 				  data->model);
386 }
387 
388 static int lm95241_probe(struct i2c_client *new_client,
389 			 const struct i2c_device_id *id)
390 {
391 	struct lm95241_data *data;
392 	int err;
393 
394 	data = kzalloc(sizeof(struct lm95241_data), GFP_KERNEL);
395 	if (!data) {
396 		err = -ENOMEM;
397 		goto exit;
398 	}
399 
400 	i2c_set_clientdata(new_client, data);
401 	mutex_init(&data->update_lock);
402 
403 	/* Initialize the LM95241 chip */
404 	lm95241_init_client(new_client);
405 
406 	/* Register sysfs hooks */
407 	err = sysfs_create_group(&new_client->dev.kobj, &lm95241_group);
408 	if (err)
409 		goto exit_free;
410 
411 	data->hwmon_dev = hwmon_device_register(&new_client->dev);
412 	if (IS_ERR(data->hwmon_dev)) {
413 		err = PTR_ERR(data->hwmon_dev);
414 		goto exit_remove_files;
415 	}
416 
417 	return 0;
418 
419 exit_remove_files:
420 	sysfs_remove_group(&new_client->dev.kobj, &lm95241_group);
421 exit_free:
422 	kfree(data);
423 exit:
424 	return err;
425 }
426 
427 static int lm95241_remove(struct i2c_client *client)
428 {
429 	struct lm95241_data *data = i2c_get_clientdata(client);
430 
431 	hwmon_device_unregister(data->hwmon_dev);
432 	sysfs_remove_group(&client->dev.kobj, &lm95241_group);
433 
434 	kfree(data);
435 	return 0;
436 }
437 
438 /* Driver data (common to all clients) */
439 static const struct i2c_device_id lm95241_id[] = {
440 	{ "lm95231", 0 },
441 	{ "lm95241", 0 },
442 	{ }
443 };
444 MODULE_DEVICE_TABLE(i2c, lm95241_id);
445 
446 static struct i2c_driver lm95241_driver = {
447 	.class		= I2C_CLASS_HWMON,
448 	.driver = {
449 		.name	= DEVNAME,
450 	},
451 	.probe		= lm95241_probe,
452 	.remove		= lm95241_remove,
453 	.id_table	= lm95241_id,
454 	.detect		= lm95241_detect,
455 	.address_list	= normal_i2c,
456 };
457 
458 module_i2c_driver(lm95241_driver);
459 
460 MODULE_AUTHOR("Davide Rizzo <elpa.rizzo@gmail.com>");
461 MODULE_DESCRIPTION("LM95241 sensor driver");
462 MODULE_LICENSE("GPL");
463