1 /* 2 * lm92 - Hardware monitoring driver 3 * Copyright (C) 2005-2008 Jean Delvare <jdelvare@suse.de> 4 * 5 * Based on the lm90 driver, with some ideas taken from the lm_sensors 6 * lm92 driver as well. 7 * 8 * The LM92 is a sensor chip made by National Semiconductor. It reports 9 * its own temperature with a 0.0625 deg resolution and a 0.33 deg 10 * accuracy. Complete datasheet can be obtained from National's website 11 * at: 12 * http://www.national.com/pf/LM/LM92.html 13 * 14 * This driver also supports the MAX6635 sensor chip made by Maxim. 15 * This chip is compatible with the LM92, but has a lesser accuracy 16 * (1.0 deg). Complete datasheet can be obtained from Maxim's website 17 * at: 18 * http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3074 19 * 20 * Since the LM92 was the first chipset supported by this driver, most 21 * comments will refer to this chipset, but are actually general and 22 * concern all supported chipsets, unless mentioned otherwise. 23 * 24 * Support could easily be added for the National Semiconductor LM76 25 * and Maxim MAX6633 and MAX6634 chips, which are mostly compatible 26 * with the LM92. 27 * 28 * This program is free software; you can redistribute it and/or modify 29 * it under the terms of the GNU General Public License as published by 30 * the Free Software Foundation; either version 2 of the License, or 31 * (at your option) any later version. 32 * 33 * This program is distributed in the hope that it will be useful, 34 * but WITHOUT ANY WARRANTY; without even the implied warranty of 35 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 36 * GNU General Public License for more details. 37 */ 38 39 #include <linux/module.h> 40 #include <linux/init.h> 41 #include <linux/slab.h> 42 #include <linux/i2c.h> 43 #include <linux/hwmon.h> 44 #include <linux/hwmon-sysfs.h> 45 #include <linux/err.h> 46 #include <linux/mutex.h> 47 #include <linux/jiffies.h> 48 49 /* 50 * The LM92 and MAX6635 have 2 two-state pins for address selection, 51 * resulting in 4 possible addresses. 52 */ 53 static const unsigned short normal_i2c[] = { 0x48, 0x49, 0x4a, 0x4b, 54 I2C_CLIENT_END }; 55 enum chips { lm92, max6635 }; 56 57 /* The LM92 registers */ 58 #define LM92_REG_CONFIG 0x01 /* 8-bit, RW */ 59 #define LM92_REG_TEMP 0x00 /* 16-bit, RO */ 60 #define LM92_REG_TEMP_HYST 0x02 /* 16-bit, RW */ 61 #define LM92_REG_TEMP_CRIT 0x03 /* 16-bit, RW */ 62 #define LM92_REG_TEMP_LOW 0x04 /* 16-bit, RW */ 63 #define LM92_REG_TEMP_HIGH 0x05 /* 16-bit, RW */ 64 #define LM92_REG_MAN_ID 0x07 /* 16-bit, RO, LM92 only */ 65 66 /* 67 * The LM92 uses signed 13-bit values with LSB = 0.0625 degree Celsius, 68 * left-justified in 16-bit registers. No rounding is done, with such 69 * a resolution it's just not worth it. Note that the MAX6635 doesn't 70 * make use of the 4 lower bits for limits (i.e. effective resolution 71 * for limits is 1 degree Celsius). 72 */ 73 static inline int TEMP_FROM_REG(s16 reg) 74 { 75 return reg / 8 * 625 / 10; 76 } 77 78 static inline s16 TEMP_TO_REG(long val) 79 { 80 val = clamp_val(val, -60000, 160000); 81 return val * 10 / 625 * 8; 82 } 83 84 /* Alarm flags are stored in the 3 LSB of the temperature register */ 85 static inline u8 ALARMS_FROM_REG(s16 reg) 86 { 87 return reg & 0x0007; 88 } 89 90 enum temp_index { 91 t_input, 92 t_crit, 93 t_min, 94 t_max, 95 t_hyst, 96 t_num_regs 97 }; 98 99 static const u8 regs[t_num_regs] = { 100 [t_input] = LM92_REG_TEMP, 101 [t_crit] = LM92_REG_TEMP_CRIT, 102 [t_min] = LM92_REG_TEMP_LOW, 103 [t_max] = LM92_REG_TEMP_HIGH, 104 [t_hyst] = LM92_REG_TEMP_HYST, 105 }; 106 107 /* Client data (each client gets its own) */ 108 struct lm92_data { 109 struct i2c_client *client; 110 struct mutex update_lock; 111 char valid; /* zero until following fields are valid */ 112 unsigned long last_updated; /* in jiffies */ 113 114 /* registers values */ 115 s16 temp[t_num_regs]; /* index with enum temp_index */ 116 }; 117 118 /* 119 * Sysfs attributes and callback functions 120 */ 121 122 static struct lm92_data *lm92_update_device(struct device *dev) 123 { 124 struct lm92_data *data = dev_get_drvdata(dev); 125 struct i2c_client *client = data->client; 126 int i; 127 128 mutex_lock(&data->update_lock); 129 130 if (time_after(jiffies, data->last_updated + HZ) || 131 !data->valid) { 132 dev_dbg(&client->dev, "Updating lm92 data\n"); 133 for (i = 0; i < t_num_regs; i++) { 134 data->temp[i] = 135 i2c_smbus_read_word_swapped(client, regs[i]); 136 } 137 data->last_updated = jiffies; 138 data->valid = 1; 139 } 140 141 mutex_unlock(&data->update_lock); 142 143 return data; 144 } 145 146 static ssize_t temp_show(struct device *dev, struct device_attribute *devattr, 147 char *buf) 148 { 149 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 150 struct lm92_data *data = lm92_update_device(dev); 151 152 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index])); 153 } 154 155 static ssize_t temp_store(struct device *dev, 156 struct device_attribute *devattr, const char *buf, 157 size_t count) 158 { 159 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 160 struct lm92_data *data = dev_get_drvdata(dev); 161 struct i2c_client *client = data->client; 162 int nr = attr->index; 163 long val; 164 int err; 165 166 err = kstrtol(buf, 10, &val); 167 if (err) 168 return err; 169 170 mutex_lock(&data->update_lock); 171 data->temp[nr] = TEMP_TO_REG(val); 172 i2c_smbus_write_word_swapped(client, regs[nr], data->temp[nr]); 173 mutex_unlock(&data->update_lock); 174 return count; 175 } 176 177 static ssize_t temp_hyst_show(struct device *dev, 178 struct device_attribute *devattr, char *buf) 179 { 180 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 181 struct lm92_data *data = lm92_update_device(dev); 182 183 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index]) 184 - TEMP_FROM_REG(data->temp[t_hyst])); 185 } 186 187 static ssize_t temp1_min_hyst_show(struct device *dev, 188 struct device_attribute *attr, char *buf) 189 { 190 struct lm92_data *data = lm92_update_device(dev); 191 192 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[t_min]) 193 + TEMP_FROM_REG(data->temp[t_hyst])); 194 } 195 196 static ssize_t temp_hyst_store(struct device *dev, 197 struct device_attribute *devattr, 198 const char *buf, size_t count) 199 { 200 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 201 struct lm92_data *data = dev_get_drvdata(dev); 202 struct i2c_client *client = data->client; 203 long val; 204 int err; 205 206 err = kstrtol(buf, 10, &val); 207 if (err) 208 return err; 209 210 val = clamp_val(val, -120000, 220000); 211 mutex_lock(&data->update_lock); 212 data->temp[t_hyst] = 213 TEMP_TO_REG(TEMP_FROM_REG(data->temp[attr->index]) - val); 214 i2c_smbus_write_word_swapped(client, LM92_REG_TEMP_HYST, 215 data->temp[t_hyst]); 216 mutex_unlock(&data->update_lock); 217 return count; 218 } 219 220 static ssize_t alarms_show(struct device *dev, struct device_attribute *attr, 221 char *buf) 222 { 223 struct lm92_data *data = lm92_update_device(dev); 224 225 return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->temp[t_input])); 226 } 227 228 static ssize_t alarm_show(struct device *dev, struct device_attribute *attr, 229 char *buf) 230 { 231 int bitnr = to_sensor_dev_attr(attr)->index; 232 struct lm92_data *data = lm92_update_device(dev); 233 return sprintf(buf, "%d\n", (data->temp[t_input] >> bitnr) & 1); 234 } 235 236 static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, t_input); 237 static SENSOR_DEVICE_ATTR_RW(temp1_crit, temp, t_crit); 238 static SENSOR_DEVICE_ATTR_RW(temp1_crit_hyst, temp_hyst, t_crit); 239 static SENSOR_DEVICE_ATTR_RW(temp1_min, temp, t_min); 240 static DEVICE_ATTR_RO(temp1_min_hyst); 241 static SENSOR_DEVICE_ATTR_RW(temp1_max, temp, t_max); 242 static SENSOR_DEVICE_ATTR_RO(temp1_max_hyst, temp_hyst, t_max); 243 static DEVICE_ATTR_RO(alarms); 244 static SENSOR_DEVICE_ATTR_RO(temp1_crit_alarm, alarm, 2); 245 static SENSOR_DEVICE_ATTR_RO(temp1_min_alarm, alarm, 0); 246 static SENSOR_DEVICE_ATTR_RO(temp1_max_alarm, alarm, 1); 247 248 /* 249 * Detection and registration 250 */ 251 252 static void lm92_init_client(struct i2c_client *client) 253 { 254 u8 config; 255 256 /* Start the conversions if needed */ 257 config = i2c_smbus_read_byte_data(client, LM92_REG_CONFIG); 258 if (config & 0x01) 259 i2c_smbus_write_byte_data(client, LM92_REG_CONFIG, 260 config & 0xFE); 261 } 262 263 static struct attribute *lm92_attrs[] = { 264 &sensor_dev_attr_temp1_input.dev_attr.attr, 265 &sensor_dev_attr_temp1_crit.dev_attr.attr, 266 &sensor_dev_attr_temp1_crit_hyst.dev_attr.attr, 267 &sensor_dev_attr_temp1_min.dev_attr.attr, 268 &dev_attr_temp1_min_hyst.attr, 269 &sensor_dev_attr_temp1_max.dev_attr.attr, 270 &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, 271 &dev_attr_alarms.attr, 272 &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr, 273 &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, 274 &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, 275 NULL 276 }; 277 ATTRIBUTE_GROUPS(lm92); 278 279 /* Return 0 if detection is successful, -ENODEV otherwise */ 280 static int lm92_detect(struct i2c_client *new_client, 281 struct i2c_board_info *info) 282 { 283 struct i2c_adapter *adapter = new_client->adapter; 284 u8 config; 285 u16 man_id; 286 287 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA 288 | I2C_FUNC_SMBUS_WORD_DATA)) 289 return -ENODEV; 290 291 config = i2c_smbus_read_byte_data(new_client, LM92_REG_CONFIG); 292 man_id = i2c_smbus_read_word_data(new_client, LM92_REG_MAN_ID); 293 294 if ((config & 0xe0) == 0x00 && man_id == 0x0180) 295 pr_info("lm92: Found National Semiconductor LM92 chip\n"); 296 else 297 return -ENODEV; 298 299 strlcpy(info->type, "lm92", I2C_NAME_SIZE); 300 301 return 0; 302 } 303 304 static int lm92_probe(struct i2c_client *new_client, 305 const struct i2c_device_id *id) 306 { 307 struct device *hwmon_dev; 308 struct lm92_data *data; 309 310 data = devm_kzalloc(&new_client->dev, sizeof(struct lm92_data), 311 GFP_KERNEL); 312 if (!data) 313 return -ENOMEM; 314 315 data->client = new_client; 316 mutex_init(&data->update_lock); 317 318 /* Initialize the chipset */ 319 lm92_init_client(new_client); 320 321 hwmon_dev = devm_hwmon_device_register_with_groups(&new_client->dev, 322 new_client->name, 323 data, lm92_groups); 324 return PTR_ERR_OR_ZERO(hwmon_dev); 325 } 326 327 /* 328 * Module and driver stuff 329 */ 330 331 static const struct i2c_device_id lm92_id[] = { 332 { "lm92", lm92 }, 333 { "max6635", max6635 }, 334 { } 335 }; 336 MODULE_DEVICE_TABLE(i2c, lm92_id); 337 338 static struct i2c_driver lm92_driver = { 339 .class = I2C_CLASS_HWMON, 340 .driver = { 341 .name = "lm92", 342 }, 343 .probe = lm92_probe, 344 .id_table = lm92_id, 345 .detect = lm92_detect, 346 .address_list = normal_i2c, 347 }; 348 349 module_i2c_driver(lm92_driver); 350 351 MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>"); 352 MODULE_DESCRIPTION("LM92/MAX6635 driver"); 353 MODULE_LICENSE("GPL"); 354