1 /* 2 it87.c - Part of lm_sensors, Linux kernel modules for hardware 3 monitoring. 4 5 Supports: IT8705F Super I/O chip w/LPC interface 6 IT8712F Super I/O chip w/LPC interface 7 IT8716F Super I/O chip w/LPC interface 8 IT8718F Super I/O chip w/LPC interface 9 Sis950 A clone of the IT8705F 10 11 Copyright (C) 2001 Chris Gauthron <chrisg@0-in.com> 12 Copyright (C) 2005-2006 Jean Delvare <khali@linux-fr.org> 13 14 This program is free software; you can redistribute it and/or modify 15 it under the terms of the GNU General Public License as published by 16 the Free Software Foundation; either version 2 of the License, or 17 (at your option) any later version. 18 19 This program is distributed in the hope that it will be useful, 20 but WITHOUT ANY WARRANTY; without even the implied warranty of 21 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 22 GNU General Public License for more details. 23 24 You should have received a copy of the GNU General Public License 25 along with this program; if not, write to the Free Software 26 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 27 */ 28 29 #include <linux/module.h> 30 #include <linux/init.h> 31 #include <linux/slab.h> 32 #include <linux/jiffies.h> 33 #include <linux/i2c.h> 34 #include <linux/i2c-isa.h> 35 #include <linux/hwmon.h> 36 #include <linux/hwmon-sysfs.h> 37 #include <linux/hwmon-vid.h> 38 #include <linux/err.h> 39 #include <linux/mutex.h> 40 #include <linux/sysfs.h> 41 #include <asm/io.h> 42 43 44 static unsigned short isa_address; 45 enum chips { it87, it8712, it8716, it8718 }; 46 47 #define REG 0x2e /* The register to read/write */ 48 #define DEV 0x07 /* Register: Logical device select */ 49 #define VAL 0x2f /* The value to read/write */ 50 #define PME 0x04 /* The device with the fan registers in it */ 51 #define GPIO 0x07 /* The device with the IT8718F VID value in it */ 52 #define DEVID 0x20 /* Register: Device ID */ 53 #define DEVREV 0x22 /* Register: Device Revision */ 54 55 static inline int 56 superio_inb(int reg) 57 { 58 outb(reg, REG); 59 return inb(VAL); 60 } 61 62 static int superio_inw(int reg) 63 { 64 int val; 65 outb(reg++, REG); 66 val = inb(VAL) << 8; 67 outb(reg, REG); 68 val |= inb(VAL); 69 return val; 70 } 71 72 static inline void 73 superio_select(int ldn) 74 { 75 outb(DEV, REG); 76 outb(ldn, VAL); 77 } 78 79 static inline void 80 superio_enter(void) 81 { 82 outb(0x87, REG); 83 outb(0x01, REG); 84 outb(0x55, REG); 85 outb(0x55, REG); 86 } 87 88 static inline void 89 superio_exit(void) 90 { 91 outb(0x02, REG); 92 outb(0x02, VAL); 93 } 94 95 /* Logical device 4 registers */ 96 #define IT8712F_DEVID 0x8712 97 #define IT8705F_DEVID 0x8705 98 #define IT8716F_DEVID 0x8716 99 #define IT8718F_DEVID 0x8718 100 #define IT87_ACT_REG 0x30 101 #define IT87_BASE_REG 0x60 102 103 /* Logical device 7 registers (IT8712F and later) */ 104 #define IT87_SIO_PINX2_REG 0x2c /* Pin selection */ 105 #define IT87_SIO_VID_REG 0xfc /* VID value */ 106 107 /* Update battery voltage after every reading if true */ 108 static int update_vbat; 109 110 /* Not all BIOSes properly configure the PWM registers */ 111 static int fix_pwm_polarity; 112 113 /* Values read from Super-I/O config space */ 114 static u16 chip_type; 115 static u8 vid_value; 116 117 /* Many IT87 constants specified below */ 118 119 /* Length of ISA address segment */ 120 #define IT87_EXTENT 8 121 122 /* Where are the ISA address/data registers relative to the base address */ 123 #define IT87_ADDR_REG_OFFSET 5 124 #define IT87_DATA_REG_OFFSET 6 125 126 /*----- The IT87 registers -----*/ 127 128 #define IT87_REG_CONFIG 0x00 129 130 #define IT87_REG_ALARM1 0x01 131 #define IT87_REG_ALARM2 0x02 132 #define IT87_REG_ALARM3 0x03 133 134 /* The IT8718F has the VID value in a different register, in Super-I/O 135 configuration space. */ 136 #define IT87_REG_VID 0x0a 137 /* Warning: register 0x0b is used for something completely different in 138 new chips/revisions. I suspect only 16-bit tachometer mode will work 139 for these. */ 140 #define IT87_REG_FAN_DIV 0x0b 141 #define IT87_REG_FAN_16BIT 0x0c 142 143 /* Monitors: 9 voltage (0 to 7, battery), 3 temp (1 to 3), 3 fan (1 to 3) */ 144 145 #define IT87_REG_FAN(nr) (0x0d + (nr)) 146 #define IT87_REG_FAN_MIN(nr) (0x10 + (nr)) 147 #define IT87_REG_FANX(nr) (0x18 + (nr)) 148 #define IT87_REG_FANX_MIN(nr) (0x1b + (nr)) 149 #define IT87_REG_FAN_MAIN_CTRL 0x13 150 #define IT87_REG_FAN_CTL 0x14 151 #define IT87_REG_PWM(nr) (0x15 + (nr)) 152 153 #define IT87_REG_VIN(nr) (0x20 + (nr)) 154 #define IT87_REG_TEMP(nr) (0x29 + (nr)) 155 156 #define IT87_REG_VIN_MAX(nr) (0x30 + (nr) * 2) 157 #define IT87_REG_VIN_MIN(nr) (0x31 + (nr) * 2) 158 #define IT87_REG_TEMP_HIGH(nr) (0x40 + (nr) * 2) 159 #define IT87_REG_TEMP_LOW(nr) (0x41 + (nr) * 2) 160 161 #define IT87_REG_VIN_ENABLE 0x50 162 #define IT87_REG_TEMP_ENABLE 0x51 163 164 #define IT87_REG_CHIPID 0x58 165 166 #define IN_TO_REG(val) (SENSORS_LIMIT((((val) + 8)/16),0,255)) 167 #define IN_FROM_REG(val) ((val) * 16) 168 169 static inline u8 FAN_TO_REG(long rpm, int div) 170 { 171 if (rpm == 0) 172 return 255; 173 rpm = SENSORS_LIMIT(rpm, 1, 1000000); 174 return SENSORS_LIMIT((1350000 + rpm * div / 2) / (rpm * div), 1, 175 254); 176 } 177 178 static inline u16 FAN16_TO_REG(long rpm) 179 { 180 if (rpm == 0) 181 return 0xffff; 182 return SENSORS_LIMIT((1350000 + rpm) / (rpm * 2), 1, 0xfffe); 183 } 184 185 #define FAN_FROM_REG(val,div) ((val)==0?-1:(val)==255?0:1350000/((val)*(div))) 186 /* The divider is fixed to 2 in 16-bit mode */ 187 #define FAN16_FROM_REG(val) ((val)==0?-1:(val)==0xffff?0:1350000/((val)*2)) 188 189 #define TEMP_TO_REG(val) (SENSORS_LIMIT(((val)<0?(((val)-500)/1000):\ 190 ((val)+500)/1000),-128,127)) 191 #define TEMP_FROM_REG(val) (((val)>0x80?(val)-0x100:(val))*1000) 192 193 #define PWM_TO_REG(val) ((val) >> 1) 194 #define PWM_FROM_REG(val) (((val)&0x7f) << 1) 195 196 static int DIV_TO_REG(int val) 197 { 198 int answer = 0; 199 while (answer < 7 && (val >>= 1)) 200 answer++; 201 return answer; 202 } 203 #define DIV_FROM_REG(val) (1 << (val)) 204 205 static const unsigned int pwm_freq[8] = { 206 48000000 / 128, 207 24000000 / 128, 208 12000000 / 128, 209 8000000 / 128, 210 6000000 / 128, 211 3000000 / 128, 212 1500000 / 128, 213 750000 / 128, 214 }; 215 216 217 /* For each registered chip, we need to keep some data in memory. 218 The structure is dynamically allocated. */ 219 struct it87_data { 220 struct i2c_client client; 221 struct class_device *class_dev; 222 enum chips type; 223 224 struct mutex update_lock; 225 char valid; /* !=0 if following fields are valid */ 226 unsigned long last_updated; /* In jiffies */ 227 228 u8 in[9]; /* Register value */ 229 u8 in_max[8]; /* Register value */ 230 u8 in_min[8]; /* Register value */ 231 u8 has_fan; /* Bitfield, fans enabled */ 232 u16 fan[3]; /* Register values, possibly combined */ 233 u16 fan_min[3]; /* Register values, possibly combined */ 234 u8 temp[3]; /* Register value */ 235 u8 temp_high[3]; /* Register value */ 236 u8 temp_low[3]; /* Register value */ 237 u8 sensor; /* Register value */ 238 u8 fan_div[3]; /* Register encoding, shifted right */ 239 u8 vid; /* Register encoding, combined */ 240 u8 vrm; 241 u32 alarms; /* Register encoding, combined */ 242 u8 fan_main_ctrl; /* Register value */ 243 u8 fan_ctl; /* Register value */ 244 u8 manual_pwm_ctl[3]; /* manual PWM value set by user */ 245 }; 246 247 248 static int it87_detect(struct i2c_adapter *adapter); 249 static int it87_detach_client(struct i2c_client *client); 250 251 static int it87_read_value(struct i2c_client *client, u8 reg); 252 static void it87_write_value(struct i2c_client *client, u8 reg, u8 value); 253 static struct it87_data *it87_update_device(struct device *dev); 254 static int it87_check_pwm(struct i2c_client *client); 255 static void it87_init_client(struct i2c_client *client, struct it87_data *data); 256 257 258 static struct i2c_driver it87_isa_driver = { 259 .driver = { 260 .owner = THIS_MODULE, 261 .name = "it87-isa", 262 }, 263 .attach_adapter = it87_detect, 264 .detach_client = it87_detach_client, 265 }; 266 267 268 static ssize_t show_in(struct device *dev, struct device_attribute *attr, 269 char *buf) 270 { 271 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 272 int nr = sensor_attr->index; 273 274 struct it87_data *data = it87_update_device(dev); 275 return sprintf(buf, "%d\n", IN_FROM_REG(data->in[nr])); 276 } 277 278 static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, 279 char *buf) 280 { 281 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 282 int nr = sensor_attr->index; 283 284 struct it87_data *data = it87_update_device(dev); 285 return sprintf(buf, "%d\n", IN_FROM_REG(data->in_min[nr])); 286 } 287 288 static ssize_t show_in_max(struct device *dev, struct device_attribute *attr, 289 char *buf) 290 { 291 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 292 int nr = sensor_attr->index; 293 294 struct it87_data *data = it87_update_device(dev); 295 return sprintf(buf, "%d\n", IN_FROM_REG(data->in_max[nr])); 296 } 297 298 static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, 299 const char *buf, size_t count) 300 { 301 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 302 int nr = sensor_attr->index; 303 304 struct i2c_client *client = to_i2c_client(dev); 305 struct it87_data *data = i2c_get_clientdata(client); 306 unsigned long val = simple_strtoul(buf, NULL, 10); 307 308 mutex_lock(&data->update_lock); 309 data->in_min[nr] = IN_TO_REG(val); 310 it87_write_value(client, IT87_REG_VIN_MIN(nr), 311 data->in_min[nr]); 312 mutex_unlock(&data->update_lock); 313 return count; 314 } 315 static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, 316 const char *buf, size_t count) 317 { 318 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 319 int nr = sensor_attr->index; 320 321 struct i2c_client *client = to_i2c_client(dev); 322 struct it87_data *data = i2c_get_clientdata(client); 323 unsigned long val = simple_strtoul(buf, NULL, 10); 324 325 mutex_lock(&data->update_lock); 326 data->in_max[nr] = IN_TO_REG(val); 327 it87_write_value(client, IT87_REG_VIN_MAX(nr), 328 data->in_max[nr]); 329 mutex_unlock(&data->update_lock); 330 return count; 331 } 332 333 #define show_in_offset(offset) \ 334 static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \ 335 show_in, NULL, offset); 336 337 #define limit_in_offset(offset) \ 338 static SENSOR_DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, \ 339 show_in_min, set_in_min, offset); \ 340 static SENSOR_DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, \ 341 show_in_max, set_in_max, offset); 342 343 show_in_offset(0); 344 limit_in_offset(0); 345 show_in_offset(1); 346 limit_in_offset(1); 347 show_in_offset(2); 348 limit_in_offset(2); 349 show_in_offset(3); 350 limit_in_offset(3); 351 show_in_offset(4); 352 limit_in_offset(4); 353 show_in_offset(5); 354 limit_in_offset(5); 355 show_in_offset(6); 356 limit_in_offset(6); 357 show_in_offset(7); 358 limit_in_offset(7); 359 show_in_offset(8); 360 361 /* 3 temperatures */ 362 static ssize_t show_temp(struct device *dev, struct device_attribute *attr, 363 char *buf) 364 { 365 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 366 int nr = sensor_attr->index; 367 368 struct it87_data *data = it87_update_device(dev); 369 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr])); 370 } 371 static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, 372 char *buf) 373 { 374 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 375 int nr = sensor_attr->index; 376 377 struct it87_data *data = it87_update_device(dev); 378 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr])); 379 } 380 static ssize_t show_temp_min(struct device *dev, struct device_attribute *attr, 381 char *buf) 382 { 383 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 384 int nr = sensor_attr->index; 385 386 struct it87_data *data = it87_update_device(dev); 387 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_low[nr])); 388 } 389 static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, 390 const char *buf, size_t count) 391 { 392 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 393 int nr = sensor_attr->index; 394 395 struct i2c_client *client = to_i2c_client(dev); 396 struct it87_data *data = i2c_get_clientdata(client); 397 int val = simple_strtol(buf, NULL, 10); 398 399 mutex_lock(&data->update_lock); 400 data->temp_high[nr] = TEMP_TO_REG(val); 401 it87_write_value(client, IT87_REG_TEMP_HIGH(nr), data->temp_high[nr]); 402 mutex_unlock(&data->update_lock); 403 return count; 404 } 405 static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr, 406 const char *buf, size_t count) 407 { 408 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 409 int nr = sensor_attr->index; 410 411 struct i2c_client *client = to_i2c_client(dev); 412 struct it87_data *data = i2c_get_clientdata(client); 413 int val = simple_strtol(buf, NULL, 10); 414 415 mutex_lock(&data->update_lock); 416 data->temp_low[nr] = TEMP_TO_REG(val); 417 it87_write_value(client, IT87_REG_TEMP_LOW(nr), data->temp_low[nr]); 418 mutex_unlock(&data->update_lock); 419 return count; 420 } 421 #define show_temp_offset(offset) \ 422 static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \ 423 show_temp, NULL, offset - 1); \ 424 static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, \ 425 show_temp_max, set_temp_max, offset - 1); \ 426 static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, \ 427 show_temp_min, set_temp_min, offset - 1); 428 429 show_temp_offset(1); 430 show_temp_offset(2); 431 show_temp_offset(3); 432 433 static ssize_t show_sensor(struct device *dev, struct device_attribute *attr, 434 char *buf) 435 { 436 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 437 int nr = sensor_attr->index; 438 439 struct it87_data *data = it87_update_device(dev); 440 u8 reg = data->sensor; /* In case the value is updated while we use it */ 441 442 if (reg & (1 << nr)) 443 return sprintf(buf, "3\n"); /* thermal diode */ 444 if (reg & (8 << nr)) 445 return sprintf(buf, "2\n"); /* thermistor */ 446 return sprintf(buf, "0\n"); /* disabled */ 447 } 448 static ssize_t set_sensor(struct device *dev, struct device_attribute *attr, 449 const char *buf, size_t count) 450 { 451 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 452 int nr = sensor_attr->index; 453 454 struct i2c_client *client = to_i2c_client(dev); 455 struct it87_data *data = i2c_get_clientdata(client); 456 int val = simple_strtol(buf, NULL, 10); 457 458 mutex_lock(&data->update_lock); 459 460 data->sensor &= ~(1 << nr); 461 data->sensor &= ~(8 << nr); 462 /* 3 = thermal diode; 2 = thermistor; 0 = disabled */ 463 if (val == 3) 464 data->sensor |= 1 << nr; 465 else if (val == 2) 466 data->sensor |= 8 << nr; 467 else if (val != 0) { 468 mutex_unlock(&data->update_lock); 469 return -EINVAL; 470 } 471 it87_write_value(client, IT87_REG_TEMP_ENABLE, data->sensor); 472 mutex_unlock(&data->update_lock); 473 return count; 474 } 475 #define show_sensor_offset(offset) \ 476 static SENSOR_DEVICE_ATTR(temp##offset##_type, S_IRUGO | S_IWUSR, \ 477 show_sensor, set_sensor, offset - 1); 478 479 show_sensor_offset(1); 480 show_sensor_offset(2); 481 show_sensor_offset(3); 482 483 /* 3 Fans */ 484 static ssize_t show_fan(struct device *dev, struct device_attribute *attr, 485 char *buf) 486 { 487 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 488 int nr = sensor_attr->index; 489 490 struct it87_data *data = it87_update_device(dev); 491 return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr], 492 DIV_FROM_REG(data->fan_div[nr]))); 493 } 494 static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr, 495 char *buf) 496 { 497 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 498 int nr = sensor_attr->index; 499 500 struct it87_data *data = it87_update_device(dev); 501 return sprintf(buf,"%d\n", 502 FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr]))); 503 } 504 static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr, 505 char *buf) 506 { 507 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 508 int nr = sensor_attr->index; 509 510 struct it87_data *data = it87_update_device(dev); 511 return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[nr])); 512 } 513 static ssize_t show_pwm_enable(struct device *dev, struct device_attribute *attr, 514 char *buf) 515 { 516 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 517 int nr = sensor_attr->index; 518 519 struct it87_data *data = it87_update_device(dev); 520 return sprintf(buf,"%d\n", (data->fan_main_ctrl & (1 << nr)) ? 1 : 0); 521 } 522 static ssize_t show_pwm(struct device *dev, struct device_attribute *attr, 523 char *buf) 524 { 525 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 526 int nr = sensor_attr->index; 527 528 struct it87_data *data = it87_update_device(dev); 529 return sprintf(buf,"%d\n", data->manual_pwm_ctl[nr]); 530 } 531 static ssize_t show_pwm_freq(struct device *dev, struct device_attribute *attr, 532 char *buf) 533 { 534 struct it87_data *data = it87_update_device(dev); 535 int index = (data->fan_ctl >> 4) & 0x07; 536 537 return sprintf(buf, "%u\n", pwm_freq[index]); 538 } 539 static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, 540 const char *buf, size_t count) 541 { 542 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 543 int nr = sensor_attr->index; 544 545 struct i2c_client *client = to_i2c_client(dev); 546 struct it87_data *data = i2c_get_clientdata(client); 547 int val = simple_strtol(buf, NULL, 10); 548 u8 reg; 549 550 mutex_lock(&data->update_lock); 551 reg = it87_read_value(client, IT87_REG_FAN_DIV); 552 switch (nr) { 553 case 0: data->fan_div[nr] = reg & 0x07; break; 554 case 1: data->fan_div[nr] = (reg >> 3) & 0x07; break; 555 case 2: data->fan_div[nr] = (reg & 0x40) ? 3 : 1; break; 556 } 557 558 data->fan_min[nr] = FAN_TO_REG(val, DIV_FROM_REG(data->fan_div[nr])); 559 it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]); 560 mutex_unlock(&data->update_lock); 561 return count; 562 } 563 static ssize_t set_fan_div(struct device *dev, struct device_attribute *attr, 564 const char *buf, size_t count) 565 { 566 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 567 int nr = sensor_attr->index; 568 569 struct i2c_client *client = to_i2c_client(dev); 570 struct it87_data *data = i2c_get_clientdata(client); 571 unsigned long val = simple_strtoul(buf, NULL, 10); 572 int min; 573 u8 old; 574 575 mutex_lock(&data->update_lock); 576 old = it87_read_value(client, IT87_REG_FAN_DIV); 577 578 /* Save fan min limit */ 579 min = FAN_FROM_REG(data->fan_min[nr], DIV_FROM_REG(data->fan_div[nr])); 580 581 switch (nr) { 582 case 0: 583 case 1: 584 data->fan_div[nr] = DIV_TO_REG(val); 585 break; 586 case 2: 587 if (val < 8) 588 data->fan_div[nr] = 1; 589 else 590 data->fan_div[nr] = 3; 591 } 592 val = old & 0x80; 593 val |= (data->fan_div[0] & 0x07); 594 val |= (data->fan_div[1] & 0x07) << 3; 595 if (data->fan_div[2] == 3) 596 val |= 0x1 << 6; 597 it87_write_value(client, IT87_REG_FAN_DIV, val); 598 599 /* Restore fan min limit */ 600 data->fan_min[nr] = FAN_TO_REG(min, DIV_FROM_REG(data->fan_div[nr])); 601 it87_write_value(client, IT87_REG_FAN_MIN(nr), data->fan_min[nr]); 602 603 mutex_unlock(&data->update_lock); 604 return count; 605 } 606 static ssize_t set_pwm_enable(struct device *dev, 607 struct device_attribute *attr, const char *buf, size_t count) 608 { 609 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 610 int nr = sensor_attr->index; 611 612 struct i2c_client *client = to_i2c_client(dev); 613 struct it87_data *data = i2c_get_clientdata(client); 614 int val = simple_strtol(buf, NULL, 10); 615 616 mutex_lock(&data->update_lock); 617 618 if (val == 0) { 619 int tmp; 620 /* make sure the fan is on when in on/off mode */ 621 tmp = it87_read_value(client, IT87_REG_FAN_CTL); 622 it87_write_value(client, IT87_REG_FAN_CTL, tmp | (1 << nr)); 623 /* set on/off mode */ 624 data->fan_main_ctrl &= ~(1 << nr); 625 it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); 626 } else if (val == 1) { 627 /* set SmartGuardian mode */ 628 data->fan_main_ctrl |= (1 << nr); 629 it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); 630 /* set saved pwm value, clear FAN_CTLX PWM mode bit */ 631 it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr])); 632 } else { 633 mutex_unlock(&data->update_lock); 634 return -EINVAL; 635 } 636 637 mutex_unlock(&data->update_lock); 638 return count; 639 } 640 static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, 641 const char *buf, size_t count) 642 { 643 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 644 int nr = sensor_attr->index; 645 646 struct i2c_client *client = to_i2c_client(dev); 647 struct it87_data *data = i2c_get_clientdata(client); 648 int val = simple_strtol(buf, NULL, 10); 649 650 if (val < 0 || val > 255) 651 return -EINVAL; 652 653 mutex_lock(&data->update_lock); 654 data->manual_pwm_ctl[nr] = val; 655 if (data->fan_main_ctrl & (1 << nr)) 656 it87_write_value(client, IT87_REG_PWM(nr), PWM_TO_REG(data->manual_pwm_ctl[nr])); 657 mutex_unlock(&data->update_lock); 658 return count; 659 } 660 static ssize_t set_pwm_freq(struct device *dev, 661 struct device_attribute *attr, const char *buf, size_t count) 662 { 663 struct i2c_client *client = to_i2c_client(dev); 664 struct it87_data *data = i2c_get_clientdata(client); 665 unsigned long val = simple_strtoul(buf, NULL, 10); 666 int i; 667 668 /* Search for the nearest available frequency */ 669 for (i = 0; i < 7; i++) { 670 if (val > (pwm_freq[i] + pwm_freq[i+1]) / 2) 671 break; 672 } 673 674 mutex_lock(&data->update_lock); 675 data->fan_ctl = it87_read_value(client, IT87_REG_FAN_CTL) & 0x8f; 676 data->fan_ctl |= i << 4; 677 it87_write_value(client, IT87_REG_FAN_CTL, data->fan_ctl); 678 mutex_unlock(&data->update_lock); 679 680 return count; 681 } 682 683 #define show_fan_offset(offset) \ 684 static SENSOR_DEVICE_ATTR(fan##offset##_input, S_IRUGO, \ 685 show_fan, NULL, offset - 1); \ 686 static SENSOR_DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ 687 show_fan_min, set_fan_min, offset - 1); \ 688 static SENSOR_DEVICE_ATTR(fan##offset##_div, S_IRUGO | S_IWUSR, \ 689 show_fan_div, set_fan_div, offset - 1); 690 691 show_fan_offset(1); 692 show_fan_offset(2); 693 show_fan_offset(3); 694 695 #define show_pwm_offset(offset) \ 696 static SENSOR_DEVICE_ATTR(pwm##offset##_enable, S_IRUGO | S_IWUSR, \ 697 show_pwm_enable, set_pwm_enable, offset - 1); \ 698 static SENSOR_DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, \ 699 show_pwm, set_pwm, offset - 1); \ 700 static DEVICE_ATTR(pwm##offset##_freq, \ 701 (offset == 1 ? S_IRUGO | S_IWUSR : S_IRUGO), \ 702 show_pwm_freq, (offset == 1 ? set_pwm_freq : NULL)); 703 704 show_pwm_offset(1); 705 show_pwm_offset(2); 706 show_pwm_offset(3); 707 708 /* A different set of callbacks for 16-bit fans */ 709 static ssize_t show_fan16(struct device *dev, struct device_attribute *attr, 710 char *buf) 711 { 712 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 713 int nr = sensor_attr->index; 714 struct it87_data *data = it87_update_device(dev); 715 return sprintf(buf, "%d\n", FAN16_FROM_REG(data->fan[nr])); 716 } 717 718 static ssize_t show_fan16_min(struct device *dev, struct device_attribute *attr, 719 char *buf) 720 { 721 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 722 int nr = sensor_attr->index; 723 struct it87_data *data = it87_update_device(dev); 724 return sprintf(buf, "%d\n", FAN16_FROM_REG(data->fan_min[nr])); 725 } 726 727 static ssize_t set_fan16_min(struct device *dev, struct device_attribute *attr, 728 const char *buf, size_t count) 729 { 730 struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); 731 int nr = sensor_attr->index; 732 struct i2c_client *client = to_i2c_client(dev); 733 struct it87_data *data = i2c_get_clientdata(client); 734 int val = simple_strtol(buf, NULL, 10); 735 736 mutex_lock(&data->update_lock); 737 data->fan_min[nr] = FAN16_TO_REG(val); 738 it87_write_value(client, IT87_REG_FAN_MIN(nr), 739 data->fan_min[nr] & 0xff); 740 it87_write_value(client, IT87_REG_FANX_MIN(nr), 741 data->fan_min[nr] >> 8); 742 mutex_unlock(&data->update_lock); 743 return count; 744 } 745 746 /* We want to use the same sysfs file names as 8-bit fans, but we need 747 different variable names, so we have to use SENSOR_ATTR instead of 748 SENSOR_DEVICE_ATTR. */ 749 #define show_fan16_offset(offset) \ 750 static struct sensor_device_attribute sensor_dev_attr_fan##offset##_input16 \ 751 = SENSOR_ATTR(fan##offset##_input, S_IRUGO, \ 752 show_fan16, NULL, offset - 1); \ 753 static struct sensor_device_attribute sensor_dev_attr_fan##offset##_min16 \ 754 = SENSOR_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, \ 755 show_fan16_min, set_fan16_min, offset - 1) 756 757 show_fan16_offset(1); 758 show_fan16_offset(2); 759 show_fan16_offset(3); 760 761 /* Alarms */ 762 static ssize_t show_alarms(struct device *dev, struct device_attribute *attr, char *buf) 763 { 764 struct it87_data *data = it87_update_device(dev); 765 return sprintf(buf, "%u\n", data->alarms); 766 } 767 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); 768 769 static ssize_t 770 show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf) 771 { 772 struct it87_data *data = it87_update_device(dev); 773 return sprintf(buf, "%u\n", data->vrm); 774 } 775 static ssize_t 776 store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) 777 { 778 struct i2c_client *client = to_i2c_client(dev); 779 struct it87_data *data = i2c_get_clientdata(client); 780 u32 val; 781 782 val = simple_strtoul(buf, NULL, 10); 783 data->vrm = val; 784 785 return count; 786 } 787 static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg); 788 789 static ssize_t 790 show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf) 791 { 792 struct it87_data *data = it87_update_device(dev); 793 return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm)); 794 } 795 static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL); 796 797 static struct attribute *it87_attributes[] = { 798 &sensor_dev_attr_in0_input.dev_attr.attr, 799 &sensor_dev_attr_in1_input.dev_attr.attr, 800 &sensor_dev_attr_in2_input.dev_attr.attr, 801 &sensor_dev_attr_in3_input.dev_attr.attr, 802 &sensor_dev_attr_in4_input.dev_attr.attr, 803 &sensor_dev_attr_in5_input.dev_attr.attr, 804 &sensor_dev_attr_in6_input.dev_attr.attr, 805 &sensor_dev_attr_in7_input.dev_attr.attr, 806 &sensor_dev_attr_in8_input.dev_attr.attr, 807 &sensor_dev_attr_in0_min.dev_attr.attr, 808 &sensor_dev_attr_in1_min.dev_attr.attr, 809 &sensor_dev_attr_in2_min.dev_attr.attr, 810 &sensor_dev_attr_in3_min.dev_attr.attr, 811 &sensor_dev_attr_in4_min.dev_attr.attr, 812 &sensor_dev_attr_in5_min.dev_attr.attr, 813 &sensor_dev_attr_in6_min.dev_attr.attr, 814 &sensor_dev_attr_in7_min.dev_attr.attr, 815 &sensor_dev_attr_in0_max.dev_attr.attr, 816 &sensor_dev_attr_in1_max.dev_attr.attr, 817 &sensor_dev_attr_in2_max.dev_attr.attr, 818 &sensor_dev_attr_in3_max.dev_attr.attr, 819 &sensor_dev_attr_in4_max.dev_attr.attr, 820 &sensor_dev_attr_in5_max.dev_attr.attr, 821 &sensor_dev_attr_in6_max.dev_attr.attr, 822 &sensor_dev_attr_in7_max.dev_attr.attr, 823 824 &sensor_dev_attr_temp1_input.dev_attr.attr, 825 &sensor_dev_attr_temp2_input.dev_attr.attr, 826 &sensor_dev_attr_temp3_input.dev_attr.attr, 827 &sensor_dev_attr_temp1_max.dev_attr.attr, 828 &sensor_dev_attr_temp2_max.dev_attr.attr, 829 &sensor_dev_attr_temp3_max.dev_attr.attr, 830 &sensor_dev_attr_temp1_min.dev_attr.attr, 831 &sensor_dev_attr_temp2_min.dev_attr.attr, 832 &sensor_dev_attr_temp3_min.dev_attr.attr, 833 &sensor_dev_attr_temp1_type.dev_attr.attr, 834 &sensor_dev_attr_temp2_type.dev_attr.attr, 835 &sensor_dev_attr_temp3_type.dev_attr.attr, 836 837 &dev_attr_alarms.attr, 838 NULL 839 }; 840 841 static const struct attribute_group it87_group = { 842 .attrs = it87_attributes, 843 }; 844 845 static struct attribute *it87_attributes_opt[] = { 846 &sensor_dev_attr_fan1_input16.dev_attr.attr, 847 &sensor_dev_attr_fan1_min16.dev_attr.attr, 848 &sensor_dev_attr_fan2_input16.dev_attr.attr, 849 &sensor_dev_attr_fan2_min16.dev_attr.attr, 850 &sensor_dev_attr_fan3_input16.dev_attr.attr, 851 &sensor_dev_attr_fan3_min16.dev_attr.attr, 852 853 &sensor_dev_attr_fan1_input.dev_attr.attr, 854 &sensor_dev_attr_fan1_min.dev_attr.attr, 855 &sensor_dev_attr_fan1_div.dev_attr.attr, 856 &sensor_dev_attr_fan2_input.dev_attr.attr, 857 &sensor_dev_attr_fan2_min.dev_attr.attr, 858 &sensor_dev_attr_fan2_div.dev_attr.attr, 859 &sensor_dev_attr_fan3_input.dev_attr.attr, 860 &sensor_dev_attr_fan3_min.dev_attr.attr, 861 &sensor_dev_attr_fan3_div.dev_attr.attr, 862 863 &sensor_dev_attr_pwm1_enable.dev_attr.attr, 864 &sensor_dev_attr_pwm2_enable.dev_attr.attr, 865 &sensor_dev_attr_pwm3_enable.dev_attr.attr, 866 &sensor_dev_attr_pwm1.dev_attr.attr, 867 &sensor_dev_attr_pwm2.dev_attr.attr, 868 &sensor_dev_attr_pwm3.dev_attr.attr, 869 870 &dev_attr_vrm.attr, 871 &dev_attr_cpu0_vid.attr, 872 NULL 873 }; 874 875 static const struct attribute_group it87_group_opt = { 876 .attrs = it87_attributes_opt, 877 }; 878 879 /* SuperIO detection - will change isa_address if a chip is found */ 880 static int __init it87_find(unsigned short *address) 881 { 882 int err = -ENODEV; 883 884 superio_enter(); 885 chip_type = superio_inw(DEVID); 886 if (chip_type != IT8712F_DEVID 887 && chip_type != IT8716F_DEVID 888 && chip_type != IT8718F_DEVID 889 && chip_type != IT8705F_DEVID) 890 goto exit; 891 892 superio_select(PME); 893 if (!(superio_inb(IT87_ACT_REG) & 0x01)) { 894 pr_info("it87: Device not activated, skipping\n"); 895 goto exit; 896 } 897 898 *address = superio_inw(IT87_BASE_REG) & ~(IT87_EXTENT - 1); 899 if (*address == 0) { 900 pr_info("it87: Base address not set, skipping\n"); 901 goto exit; 902 } 903 904 err = 0; 905 pr_info("it87: Found IT%04xF chip at 0x%x, revision %d\n", 906 chip_type, *address, superio_inb(DEVREV) & 0x0f); 907 908 /* Read GPIO config and VID value from LDN 7 (GPIO) */ 909 if (chip_type != IT8705F_DEVID) { 910 int reg; 911 912 superio_select(GPIO); 913 if (chip_type == it8718) 914 vid_value = superio_inb(IT87_SIO_VID_REG); 915 916 reg = superio_inb(IT87_SIO_PINX2_REG); 917 if (reg & (1 << 0)) 918 pr_info("it87: in3 is VCC (+5V)\n"); 919 if (reg & (1 << 1)) 920 pr_info("it87: in7 is VCCH (+5V Stand-By)\n"); 921 } 922 923 exit: 924 superio_exit(); 925 return err; 926 } 927 928 /* This function is called by i2c_probe */ 929 static int it87_detect(struct i2c_adapter *adapter) 930 { 931 struct i2c_client *new_client; 932 struct it87_data *data; 933 int err = 0; 934 const char *name; 935 int enable_pwm_interface; 936 937 /* Reserve the ISA region */ 938 if (!request_region(isa_address, IT87_EXTENT, 939 it87_isa_driver.driver.name)){ 940 err = -EBUSY; 941 goto ERROR0; 942 } 943 944 if (!(data = kzalloc(sizeof(struct it87_data), GFP_KERNEL))) { 945 err = -ENOMEM; 946 goto ERROR1; 947 } 948 949 new_client = &data->client; 950 i2c_set_clientdata(new_client, data); 951 new_client->addr = isa_address; 952 new_client->adapter = adapter; 953 new_client->driver = &it87_isa_driver; 954 955 /* Now, we do the remaining detection. */ 956 if ((it87_read_value(new_client, IT87_REG_CONFIG) & 0x80) 957 || it87_read_value(new_client, IT87_REG_CHIPID) != 0x90) { 958 err = -ENODEV; 959 goto ERROR2; 960 } 961 962 /* Determine the chip type. */ 963 switch (chip_type) { 964 case IT8712F_DEVID: 965 data->type = it8712; 966 name = "it8712"; 967 break; 968 case IT8716F_DEVID: 969 data->type = it8716; 970 name = "it8716"; 971 break; 972 case IT8718F_DEVID: 973 data->type = it8718; 974 name = "it8718"; 975 break; 976 default: 977 data->type = it87; 978 name = "it87"; 979 } 980 981 /* Fill in the remaining client fields and put it into the global list */ 982 strlcpy(new_client->name, name, I2C_NAME_SIZE); 983 mutex_init(&data->update_lock); 984 985 /* Tell the I2C layer a new client has arrived */ 986 if ((err = i2c_attach_client(new_client))) 987 goto ERROR2; 988 989 /* Check PWM configuration */ 990 enable_pwm_interface = it87_check_pwm(new_client); 991 992 /* Initialize the IT87 chip */ 993 it87_init_client(new_client, data); 994 995 /* Register sysfs hooks */ 996 if ((err = sysfs_create_group(&new_client->dev.kobj, &it87_group))) 997 goto ERROR3; 998 999 /* Do not create fan files for disabled fans */ 1000 if (data->type == it8716 || data->type == it8718) { 1001 /* 16-bit tachometers */ 1002 if (data->has_fan & (1 << 0)) { 1003 if ((err = device_create_file(&new_client->dev, 1004 &sensor_dev_attr_fan1_input16.dev_attr)) 1005 || (err = device_create_file(&new_client->dev, 1006 &sensor_dev_attr_fan1_min16.dev_attr))) 1007 goto ERROR4; 1008 } 1009 if (data->has_fan & (1 << 1)) { 1010 if ((err = device_create_file(&new_client->dev, 1011 &sensor_dev_attr_fan2_input16.dev_attr)) 1012 || (err = device_create_file(&new_client->dev, 1013 &sensor_dev_attr_fan2_min16.dev_attr))) 1014 goto ERROR4; 1015 } 1016 if (data->has_fan & (1 << 2)) { 1017 if ((err = device_create_file(&new_client->dev, 1018 &sensor_dev_attr_fan3_input16.dev_attr)) 1019 || (err = device_create_file(&new_client->dev, 1020 &sensor_dev_attr_fan3_min16.dev_attr))) 1021 goto ERROR4; 1022 } 1023 } else { 1024 /* 8-bit tachometers with clock divider */ 1025 if (data->has_fan & (1 << 0)) { 1026 if ((err = device_create_file(&new_client->dev, 1027 &sensor_dev_attr_fan1_input.dev_attr)) 1028 || (err = device_create_file(&new_client->dev, 1029 &sensor_dev_attr_fan1_min.dev_attr)) 1030 || (err = device_create_file(&new_client->dev, 1031 &sensor_dev_attr_fan1_div.dev_attr))) 1032 goto ERROR4; 1033 } 1034 if (data->has_fan & (1 << 1)) { 1035 if ((err = device_create_file(&new_client->dev, 1036 &sensor_dev_attr_fan2_input.dev_attr)) 1037 || (err = device_create_file(&new_client->dev, 1038 &sensor_dev_attr_fan2_min.dev_attr)) 1039 || (err = device_create_file(&new_client->dev, 1040 &sensor_dev_attr_fan2_div.dev_attr))) 1041 goto ERROR4; 1042 } 1043 if (data->has_fan & (1 << 2)) { 1044 if ((err = device_create_file(&new_client->dev, 1045 &sensor_dev_attr_fan3_input.dev_attr)) 1046 || (err = device_create_file(&new_client->dev, 1047 &sensor_dev_attr_fan3_min.dev_attr)) 1048 || (err = device_create_file(&new_client->dev, 1049 &sensor_dev_attr_fan3_div.dev_attr))) 1050 goto ERROR4; 1051 } 1052 } 1053 1054 if (enable_pwm_interface) { 1055 if ((err = device_create_file(&new_client->dev, 1056 &sensor_dev_attr_pwm1_enable.dev_attr)) 1057 || (err = device_create_file(&new_client->dev, 1058 &sensor_dev_attr_pwm2_enable.dev_attr)) 1059 || (err = device_create_file(&new_client->dev, 1060 &sensor_dev_attr_pwm3_enable.dev_attr)) 1061 || (err = device_create_file(&new_client->dev, 1062 &sensor_dev_attr_pwm1.dev_attr)) 1063 || (err = device_create_file(&new_client->dev, 1064 &sensor_dev_attr_pwm2.dev_attr)) 1065 || (err = device_create_file(&new_client->dev, 1066 &sensor_dev_attr_pwm3.dev_attr)) 1067 || (err = device_create_file(&new_client->dev, 1068 &dev_attr_pwm1_freq)) 1069 || (err = device_create_file(&new_client->dev, 1070 &dev_attr_pwm2_freq)) 1071 || (err = device_create_file(&new_client->dev, 1072 &dev_attr_pwm3_freq))) 1073 goto ERROR4; 1074 } 1075 1076 if (data->type == it8712 || data->type == it8716 1077 || data->type == it8718) { 1078 data->vrm = vid_which_vrm(); 1079 /* VID reading from Super-I/O config space if available */ 1080 data->vid = vid_value; 1081 if ((err = device_create_file(&new_client->dev, 1082 &dev_attr_vrm)) 1083 || (err = device_create_file(&new_client->dev, 1084 &dev_attr_cpu0_vid))) 1085 goto ERROR4; 1086 } 1087 1088 data->class_dev = hwmon_device_register(&new_client->dev); 1089 if (IS_ERR(data->class_dev)) { 1090 err = PTR_ERR(data->class_dev); 1091 goto ERROR4; 1092 } 1093 1094 return 0; 1095 1096 ERROR4: 1097 sysfs_remove_group(&new_client->dev.kobj, &it87_group); 1098 sysfs_remove_group(&new_client->dev.kobj, &it87_group_opt); 1099 ERROR3: 1100 i2c_detach_client(new_client); 1101 ERROR2: 1102 kfree(data); 1103 ERROR1: 1104 release_region(isa_address, IT87_EXTENT); 1105 ERROR0: 1106 return err; 1107 } 1108 1109 static int it87_detach_client(struct i2c_client *client) 1110 { 1111 struct it87_data *data = i2c_get_clientdata(client); 1112 int err; 1113 1114 hwmon_device_unregister(data->class_dev); 1115 sysfs_remove_group(&client->dev.kobj, &it87_group); 1116 sysfs_remove_group(&client->dev.kobj, &it87_group_opt); 1117 1118 if ((err = i2c_detach_client(client))) 1119 return err; 1120 1121 release_region(client->addr, IT87_EXTENT); 1122 kfree(data); 1123 1124 return 0; 1125 } 1126 1127 /* Must be called with data->update_lock held, except during initialization. 1128 We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks, 1129 would slow down the IT87 access and should not be necessary. */ 1130 static int it87_read_value(struct i2c_client *client, u8 reg) 1131 { 1132 outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET); 1133 return inb_p(client->addr + IT87_DATA_REG_OFFSET); 1134 } 1135 1136 /* Must be called with data->update_lock held, except during initialization. 1137 We ignore the IT87 BUSY flag at this moment - it could lead to deadlocks, 1138 would slow down the IT87 access and should not be necessary. */ 1139 static void it87_write_value(struct i2c_client *client, u8 reg, u8 value) 1140 { 1141 outb_p(reg, client->addr + IT87_ADDR_REG_OFFSET); 1142 outb_p(value, client->addr + IT87_DATA_REG_OFFSET); 1143 } 1144 1145 /* Return 1 if and only if the PWM interface is safe to use */ 1146 static int it87_check_pwm(struct i2c_client *client) 1147 { 1148 /* Some BIOSes fail to correctly configure the IT87 fans. All fans off 1149 * and polarity set to active low is sign that this is the case so we 1150 * disable pwm control to protect the user. */ 1151 int tmp = it87_read_value(client, IT87_REG_FAN_CTL); 1152 if ((tmp & 0x87) == 0) { 1153 if (fix_pwm_polarity) { 1154 /* The user asks us to attempt a chip reconfiguration. 1155 * This means switching to active high polarity and 1156 * inverting all fan speed values. */ 1157 int i; 1158 u8 pwm[3]; 1159 1160 for (i = 0; i < 3; i++) 1161 pwm[i] = it87_read_value(client, 1162 IT87_REG_PWM(i)); 1163 1164 /* If any fan is in automatic pwm mode, the polarity 1165 * might be correct, as suspicious as it seems, so we 1166 * better don't change anything (but still disable the 1167 * PWM interface). */ 1168 if (!((pwm[0] | pwm[1] | pwm[2]) & 0x80)) { 1169 dev_info(&client->dev, "Reconfiguring PWM to " 1170 "active high polarity\n"); 1171 it87_write_value(client, IT87_REG_FAN_CTL, 1172 tmp | 0x87); 1173 for (i = 0; i < 3; i++) 1174 it87_write_value(client, 1175 IT87_REG_PWM(i), 1176 0x7f & ~pwm[i]); 1177 return 1; 1178 } 1179 1180 dev_info(&client->dev, "PWM configuration is " 1181 "too broken to be fixed\n"); 1182 } 1183 1184 dev_info(&client->dev, "Detected broken BIOS " 1185 "defaults, disabling PWM interface\n"); 1186 return 0; 1187 } else if (fix_pwm_polarity) { 1188 dev_info(&client->dev, "PWM configuration looks " 1189 "sane, won't touch\n"); 1190 } 1191 1192 return 1; 1193 } 1194 1195 /* Called when we have found a new IT87. */ 1196 static void it87_init_client(struct i2c_client *client, struct it87_data *data) 1197 { 1198 int tmp, i; 1199 1200 /* initialize to sane defaults: 1201 * - if the chip is in manual pwm mode, this will be overwritten with 1202 * the actual settings on the chip (so in this case, initialization 1203 * is not needed) 1204 * - if in automatic or on/off mode, we could switch to manual mode, 1205 * read the registers and set manual_pwm_ctl accordingly, but currently 1206 * this is not implemented, so we initialize to something sane */ 1207 for (i = 0; i < 3; i++) { 1208 data->manual_pwm_ctl[i] = 0xff; 1209 } 1210 1211 /* Some chips seem to have default value 0xff for all limit 1212 * registers. For low voltage limits it makes no sense and triggers 1213 * alarms, so change to 0 instead. For high temperature limits, it 1214 * means -1 degree C, which surprisingly doesn't trigger an alarm, 1215 * but is still confusing, so change to 127 degrees C. */ 1216 for (i = 0; i < 8; i++) { 1217 tmp = it87_read_value(client, IT87_REG_VIN_MIN(i)); 1218 if (tmp == 0xff) 1219 it87_write_value(client, IT87_REG_VIN_MIN(i), 0); 1220 } 1221 for (i = 0; i < 3; i++) { 1222 tmp = it87_read_value(client, IT87_REG_TEMP_HIGH(i)); 1223 if (tmp == 0xff) 1224 it87_write_value(client, IT87_REG_TEMP_HIGH(i), 127); 1225 } 1226 1227 /* Check if temperature channnels are reset manually or by some reason */ 1228 tmp = it87_read_value(client, IT87_REG_TEMP_ENABLE); 1229 if ((tmp & 0x3f) == 0) { 1230 /* Temp1,Temp3=thermistor; Temp2=thermal diode */ 1231 tmp = (tmp & 0xc0) | 0x2a; 1232 it87_write_value(client, IT87_REG_TEMP_ENABLE, tmp); 1233 } 1234 data->sensor = tmp; 1235 1236 /* Check if voltage monitors are reset manually or by some reason */ 1237 tmp = it87_read_value(client, IT87_REG_VIN_ENABLE); 1238 if ((tmp & 0xff) == 0) { 1239 /* Enable all voltage monitors */ 1240 it87_write_value(client, IT87_REG_VIN_ENABLE, 0xff); 1241 } 1242 1243 /* Check if tachometers are reset manually or by some reason */ 1244 data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL); 1245 if ((data->fan_main_ctrl & 0x70) == 0) { 1246 /* Enable all fan tachometers */ 1247 data->fan_main_ctrl |= 0x70; 1248 it87_write_value(client, IT87_REG_FAN_MAIN_CTRL, data->fan_main_ctrl); 1249 } 1250 data->has_fan = (data->fan_main_ctrl >> 4) & 0x07; 1251 1252 /* Set tachometers to 16-bit mode if needed */ 1253 if (data->type == it8716 || data->type == it8718) { 1254 tmp = it87_read_value(client, IT87_REG_FAN_16BIT); 1255 if (~tmp & 0x07 & data->has_fan) { 1256 dev_dbg(&client->dev, 1257 "Setting fan1-3 to 16-bit mode\n"); 1258 it87_write_value(client, IT87_REG_FAN_16BIT, 1259 tmp | 0x07); 1260 } 1261 } 1262 1263 /* Set current fan mode registers and the default settings for the 1264 * other mode registers */ 1265 for (i = 0; i < 3; i++) { 1266 if (data->fan_main_ctrl & (1 << i)) { 1267 /* pwm mode */ 1268 tmp = it87_read_value(client, IT87_REG_PWM(i)); 1269 if (tmp & 0x80) { 1270 /* automatic pwm - not yet implemented, but 1271 * leave the settings made by the BIOS alone 1272 * until a change is requested via the sysfs 1273 * interface */ 1274 } else { 1275 /* manual pwm */ 1276 data->manual_pwm_ctl[i] = PWM_FROM_REG(tmp); 1277 } 1278 } 1279 } 1280 1281 /* Start monitoring */ 1282 it87_write_value(client, IT87_REG_CONFIG, 1283 (it87_read_value(client, IT87_REG_CONFIG) & 0x36) 1284 | (update_vbat ? 0x41 : 0x01)); 1285 } 1286 1287 static struct it87_data *it87_update_device(struct device *dev) 1288 { 1289 struct i2c_client *client = to_i2c_client(dev); 1290 struct it87_data *data = i2c_get_clientdata(client); 1291 int i; 1292 1293 mutex_lock(&data->update_lock); 1294 1295 if (time_after(jiffies, data->last_updated + HZ + HZ / 2) 1296 || !data->valid) { 1297 1298 if (update_vbat) { 1299 /* Cleared after each update, so reenable. Value 1300 returned by this read will be previous value */ 1301 it87_write_value(client, IT87_REG_CONFIG, 1302 it87_read_value(client, IT87_REG_CONFIG) | 0x40); 1303 } 1304 for (i = 0; i <= 7; i++) { 1305 data->in[i] = 1306 it87_read_value(client, IT87_REG_VIN(i)); 1307 data->in_min[i] = 1308 it87_read_value(client, IT87_REG_VIN_MIN(i)); 1309 data->in_max[i] = 1310 it87_read_value(client, IT87_REG_VIN_MAX(i)); 1311 } 1312 /* in8 (battery) has no limit registers */ 1313 data->in[8] = 1314 it87_read_value(client, IT87_REG_VIN(8)); 1315 1316 for (i = 0; i < 3; i++) { 1317 /* Skip disabled fans */ 1318 if (!(data->has_fan & (1 << i))) 1319 continue; 1320 1321 data->fan_min[i] = 1322 it87_read_value(client, IT87_REG_FAN_MIN(i)); 1323 data->fan[i] = it87_read_value(client, 1324 IT87_REG_FAN(i)); 1325 /* Add high byte if in 16-bit mode */ 1326 if (data->type == it8716 || data->type == it8718) { 1327 data->fan[i] |= it87_read_value(client, 1328 IT87_REG_FANX(i)) << 8; 1329 data->fan_min[i] |= it87_read_value(client, 1330 IT87_REG_FANX_MIN(i)) << 8; 1331 } 1332 } 1333 for (i = 0; i < 3; i++) { 1334 data->temp[i] = 1335 it87_read_value(client, IT87_REG_TEMP(i)); 1336 data->temp_high[i] = 1337 it87_read_value(client, IT87_REG_TEMP_HIGH(i)); 1338 data->temp_low[i] = 1339 it87_read_value(client, IT87_REG_TEMP_LOW(i)); 1340 } 1341 1342 /* Newer chips don't have clock dividers */ 1343 if ((data->has_fan & 0x07) && data->type != it8716 1344 && data->type != it8718) { 1345 i = it87_read_value(client, IT87_REG_FAN_DIV); 1346 data->fan_div[0] = i & 0x07; 1347 data->fan_div[1] = (i >> 3) & 0x07; 1348 data->fan_div[2] = (i & 0x40) ? 3 : 1; 1349 } 1350 1351 data->alarms = 1352 it87_read_value(client, IT87_REG_ALARM1) | 1353 (it87_read_value(client, IT87_REG_ALARM2) << 8) | 1354 (it87_read_value(client, IT87_REG_ALARM3) << 16); 1355 data->fan_main_ctrl = it87_read_value(client, IT87_REG_FAN_MAIN_CTRL); 1356 data->fan_ctl = it87_read_value(client, IT87_REG_FAN_CTL); 1357 1358 data->sensor = it87_read_value(client, IT87_REG_TEMP_ENABLE); 1359 /* The 8705 does not have VID capability */ 1360 if (data->type == it8712 || data->type == it8716) { 1361 data->vid = it87_read_value(client, IT87_REG_VID); 1362 /* The older IT8712F revisions had only 5 VID pins, 1363 but we assume it is always safe to read 6 bits. */ 1364 data->vid &= 0x3f; 1365 } 1366 data->last_updated = jiffies; 1367 data->valid = 1; 1368 } 1369 1370 mutex_unlock(&data->update_lock); 1371 1372 return data; 1373 } 1374 1375 static int __init sm_it87_init(void) 1376 { 1377 int res; 1378 1379 if ((res = it87_find(&isa_address))) 1380 return res; 1381 return i2c_isa_add_driver(&it87_isa_driver); 1382 } 1383 1384 static void __exit sm_it87_exit(void) 1385 { 1386 i2c_isa_del_driver(&it87_isa_driver); 1387 } 1388 1389 1390 MODULE_AUTHOR("Chris Gauthron <chrisg@0-in.com>, " 1391 "Jean Delvare <khali@linux-fr.org>"); 1392 MODULE_DESCRIPTION("IT8705F/8712F/8716F/8718F, SiS950 driver"); 1393 module_param(update_vbat, bool, 0); 1394 MODULE_PARM_DESC(update_vbat, "Update vbat if set else return powerup value"); 1395 module_param(fix_pwm_polarity, bool, 0); 1396 MODULE_PARM_DESC(fix_pwm_polarity, "Force PWM polarity to active high (DANGEROUS)"); 1397 MODULE_LICENSE("GPL"); 1398 1399 module_init(sm_it87_init); 1400 module_exit(sm_it87_exit); 1401