xref: /openbmc/linux/drivers/hwmon/gl520sm.c (revision 9134211f)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * gl520sm.c - Part of lm_sensors, Linux kernel modules for hardware
4  *	       monitoring
5  * Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl>,
6  *			     Kyösti Mälkki <kmalkki@cc.hut.fi>
7  * Copyright (c) 2005	Maarten Deprez <maartendeprez@users.sourceforge.net>
8  */
9 
10 #include <linux/module.h>
11 #include <linux/init.h>
12 #include <linux/slab.h>
13 #include <linux/jiffies.h>
14 #include <linux/i2c.h>
15 #include <linux/hwmon.h>
16 #include <linux/hwmon-sysfs.h>
17 #include <linux/hwmon-vid.h>
18 #include <linux/err.h>
19 #include <linux/mutex.h>
20 #include <linux/sysfs.h>
21 
22 /* Type of the extra sensor */
23 static unsigned short extra_sensor_type;
24 module_param(extra_sensor_type, ushort, 0);
25 MODULE_PARM_DESC(extra_sensor_type, "Type of extra sensor (0=autodetect, 1=temperature, 2=voltage)");
26 
27 /* Addresses to scan */
28 static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
29 
30 /*
31  * Many GL520 constants specified below
32  * One of the inputs can be configured as either temp or voltage.
33  * That's why _TEMP2 and _IN4 access the same register
34  */
35 
36 /* The GL520 registers */
37 #define GL520_REG_CHIP_ID		0x00
38 #define GL520_REG_REVISION		0x01
39 #define GL520_REG_CONF			0x03
40 #define GL520_REG_MASK			0x11
41 
42 #define GL520_REG_VID_INPUT		0x02
43 
44 static const u8 GL520_REG_IN_INPUT[]	= { 0x15, 0x14, 0x13, 0x0d, 0x0e };
45 static const u8 GL520_REG_IN_LIMIT[]	= { 0x0c, 0x09, 0x0a, 0x0b };
46 static const u8 GL520_REG_IN_MIN[]	= { 0x0c, 0x09, 0x0a, 0x0b, 0x18 };
47 static const u8 GL520_REG_IN_MAX[]	= { 0x0c, 0x09, 0x0a, 0x0b, 0x17 };
48 
49 static const u8 GL520_REG_TEMP_INPUT[]		= { 0x04, 0x0e };
50 static const u8 GL520_REG_TEMP_MAX[]		= { 0x05, 0x17 };
51 static const u8 GL520_REG_TEMP_MAX_HYST[]	= { 0x06, 0x18 };
52 
53 #define GL520_REG_FAN_INPUT		0x07
54 #define GL520_REG_FAN_MIN		0x08
55 #define GL520_REG_FAN_DIV		0x0f
56 #define GL520_REG_FAN_OFF		GL520_REG_FAN_DIV
57 
58 #define GL520_REG_ALARMS		0x12
59 #define GL520_REG_BEEP_MASK		0x10
60 #define GL520_REG_BEEP_ENABLE		GL520_REG_CONF
61 
62 /* Client data */
63 struct gl520_data {
64 	struct i2c_client *client;
65 	const struct attribute_group *groups[3];
66 	struct mutex update_lock;
67 	bool valid;		/* false until the following fields are valid */
68 	unsigned long last_updated;	/* in jiffies */
69 
70 	u8 vid;
71 	u8 vrm;
72 	u8 in_input[5];		/* [0] = VVD */
73 	u8 in_min[5];		/* [0] = VDD */
74 	u8 in_max[5];		/* [0] = VDD */
75 	u8 fan_input[2];
76 	u8 fan_min[2];
77 	u8 fan_div[2];
78 	u8 fan_off;
79 	u8 temp_input[2];
80 	u8 temp_max[2];
81 	u8 temp_max_hyst[2];
82 	u8 alarms;
83 	u8 beep_enable;
84 	u8 beep_mask;
85 	u8 alarm_mask;
86 	u8 two_temps;
87 };
88 
89 /*
90  * Registers 0x07 to 0x0c are word-sized, others are byte-sized
91  * GL520 uses a high-byte first convention
92  */
93 static int gl520_read_value(struct i2c_client *client, u8 reg)
94 {
95 	if ((reg >= 0x07) && (reg <= 0x0c))
96 		return i2c_smbus_read_word_swapped(client, reg);
97 	else
98 		return i2c_smbus_read_byte_data(client, reg);
99 }
100 
101 static int gl520_write_value(struct i2c_client *client, u8 reg, u16 value)
102 {
103 	if ((reg >= 0x07) && (reg <= 0x0c))
104 		return i2c_smbus_write_word_swapped(client, reg, value);
105 	else
106 		return i2c_smbus_write_byte_data(client, reg, value);
107 }
108 
109 static struct gl520_data *gl520_update_device(struct device *dev)
110 {
111 	struct gl520_data *data = dev_get_drvdata(dev);
112 	struct i2c_client *client = data->client;
113 	int val, i;
114 
115 	mutex_lock(&data->update_lock);
116 
117 	if (time_after(jiffies, data->last_updated + 2 * HZ) || !data->valid) {
118 
119 		dev_dbg(&client->dev, "Starting gl520sm update\n");
120 
121 		data->alarms = gl520_read_value(client, GL520_REG_ALARMS);
122 		data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK);
123 		data->vid = gl520_read_value(client,
124 					     GL520_REG_VID_INPUT) & 0x1f;
125 
126 		for (i = 0; i < 4; i++) {
127 			data->in_input[i] = gl520_read_value(client,
128 							GL520_REG_IN_INPUT[i]);
129 			val = gl520_read_value(client, GL520_REG_IN_LIMIT[i]);
130 			data->in_min[i] = val & 0xff;
131 			data->in_max[i] = (val >> 8) & 0xff;
132 		}
133 
134 		val = gl520_read_value(client, GL520_REG_FAN_INPUT);
135 		data->fan_input[0] = (val >> 8) & 0xff;
136 		data->fan_input[1] = val & 0xff;
137 
138 		val = gl520_read_value(client, GL520_REG_FAN_MIN);
139 		data->fan_min[0] = (val >> 8) & 0xff;
140 		data->fan_min[1] = val & 0xff;
141 
142 		data->temp_input[0] = gl520_read_value(client,
143 						GL520_REG_TEMP_INPUT[0]);
144 		data->temp_max[0] = gl520_read_value(client,
145 						GL520_REG_TEMP_MAX[0]);
146 		data->temp_max_hyst[0] = gl520_read_value(client,
147 						GL520_REG_TEMP_MAX_HYST[0]);
148 
149 		val = gl520_read_value(client, GL520_REG_FAN_DIV);
150 		data->fan_div[0] = (val >> 6) & 0x03;
151 		data->fan_div[1] = (val >> 4) & 0x03;
152 		data->fan_off = (val >> 2) & 0x01;
153 
154 		data->alarms &= data->alarm_mask;
155 
156 		val = gl520_read_value(client, GL520_REG_CONF);
157 		data->beep_enable = !((val >> 2) & 1);
158 
159 		/* Temp1 and Vin4 are the same input */
160 		if (data->two_temps) {
161 			data->temp_input[1] = gl520_read_value(client,
162 						GL520_REG_TEMP_INPUT[1]);
163 			data->temp_max[1] = gl520_read_value(client,
164 						GL520_REG_TEMP_MAX[1]);
165 			data->temp_max_hyst[1] = gl520_read_value(client,
166 						GL520_REG_TEMP_MAX_HYST[1]);
167 		} else {
168 			data->in_input[4] = gl520_read_value(client,
169 						GL520_REG_IN_INPUT[4]);
170 			data->in_min[4] = gl520_read_value(client,
171 						GL520_REG_IN_MIN[4]);
172 			data->in_max[4] = gl520_read_value(client,
173 						GL520_REG_IN_MAX[4]);
174 		}
175 
176 		data->last_updated = jiffies;
177 		data->valid = true;
178 	}
179 
180 	mutex_unlock(&data->update_lock);
181 
182 	return data;
183 }
184 
185 /*
186  * Sysfs stuff
187  */
188 
189 static ssize_t cpu0_vid_show(struct device *dev,
190 			     struct device_attribute *attr, char *buf)
191 {
192 	struct gl520_data *data = gl520_update_device(dev);
193 	return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm));
194 }
195 static DEVICE_ATTR_RO(cpu0_vid);
196 
197 #define VDD_FROM_REG(val)	DIV_ROUND_CLOSEST((val) * 95, 4)
198 #define VDD_CLAMP(val)		clamp_val(val, 0, 255 * 95 / 4)
199 #define VDD_TO_REG(val)		DIV_ROUND_CLOSEST(VDD_CLAMP(val) * 4, 95)
200 
201 #define IN_FROM_REG(val)	((val) * 19)
202 #define IN_CLAMP(val)		clamp_val(val, 0, 255 * 19)
203 #define IN_TO_REG(val)		DIV_ROUND_CLOSEST(IN_CLAMP(val), 19)
204 
205 static ssize_t in_input_show(struct device *dev,
206 			     struct device_attribute *attr, char *buf)
207 {
208 	int n = to_sensor_dev_attr(attr)->index;
209 	struct gl520_data *data = gl520_update_device(dev);
210 	u8 r = data->in_input[n];
211 
212 	if (n == 0)
213 		return sprintf(buf, "%d\n", VDD_FROM_REG(r));
214 	else
215 		return sprintf(buf, "%d\n", IN_FROM_REG(r));
216 }
217 
218 static ssize_t in_min_show(struct device *dev, struct device_attribute *attr,
219 			   char *buf)
220 {
221 	int n = to_sensor_dev_attr(attr)->index;
222 	struct gl520_data *data = gl520_update_device(dev);
223 	u8 r = data->in_min[n];
224 
225 	if (n == 0)
226 		return sprintf(buf, "%d\n", VDD_FROM_REG(r));
227 	else
228 		return sprintf(buf, "%d\n", IN_FROM_REG(r));
229 }
230 
231 static ssize_t in_max_show(struct device *dev, struct device_attribute *attr,
232 			   char *buf)
233 {
234 	int n = to_sensor_dev_attr(attr)->index;
235 	struct gl520_data *data = gl520_update_device(dev);
236 	u8 r = data->in_max[n];
237 
238 	if (n == 0)
239 		return sprintf(buf, "%d\n", VDD_FROM_REG(r));
240 	else
241 		return sprintf(buf, "%d\n", IN_FROM_REG(r));
242 }
243 
244 static ssize_t in_min_store(struct device *dev, struct device_attribute *attr,
245 			    const char *buf, size_t count)
246 {
247 	struct gl520_data *data = dev_get_drvdata(dev);
248 	struct i2c_client *client = data->client;
249 	int n = to_sensor_dev_attr(attr)->index;
250 	u8 r;
251 	long v;
252 	int err;
253 
254 	err = kstrtol(buf, 10, &v);
255 	if (err)
256 		return err;
257 
258 	mutex_lock(&data->update_lock);
259 
260 	if (n == 0)
261 		r = VDD_TO_REG(v);
262 	else
263 		r = IN_TO_REG(v);
264 
265 	data->in_min[n] = r;
266 
267 	if (n < 4)
268 		gl520_write_value(client, GL520_REG_IN_MIN[n],
269 				  (gl520_read_value(client, GL520_REG_IN_MIN[n])
270 				   & ~0xff) | r);
271 	else
272 		gl520_write_value(client, GL520_REG_IN_MIN[n], r);
273 
274 	mutex_unlock(&data->update_lock);
275 	return count;
276 }
277 
278 static ssize_t in_max_store(struct device *dev, struct device_attribute *attr,
279 			    const char *buf, size_t count)
280 {
281 	struct gl520_data *data = dev_get_drvdata(dev);
282 	struct i2c_client *client = data->client;
283 	int n = to_sensor_dev_attr(attr)->index;
284 	u8 r;
285 	long v;
286 	int err;
287 
288 	err = kstrtol(buf, 10, &v);
289 	if (err)
290 		return err;
291 
292 	if (n == 0)
293 		r = VDD_TO_REG(v);
294 	else
295 		r = IN_TO_REG(v);
296 
297 	mutex_lock(&data->update_lock);
298 
299 	data->in_max[n] = r;
300 
301 	if (n < 4)
302 		gl520_write_value(client, GL520_REG_IN_MAX[n],
303 				  (gl520_read_value(client, GL520_REG_IN_MAX[n])
304 				   & ~0xff00) | (r << 8));
305 	else
306 		gl520_write_value(client, GL520_REG_IN_MAX[n], r);
307 
308 	mutex_unlock(&data->update_lock);
309 	return count;
310 }
311 
312 static SENSOR_DEVICE_ATTR_RO(in0_input, in_input, 0);
313 static SENSOR_DEVICE_ATTR_RO(in1_input, in_input, 1);
314 static SENSOR_DEVICE_ATTR_RO(in2_input, in_input, 2);
315 static SENSOR_DEVICE_ATTR_RO(in3_input, in_input, 3);
316 static SENSOR_DEVICE_ATTR_RO(in4_input, in_input, 4);
317 static SENSOR_DEVICE_ATTR_RW(in0_min, in_min, 0);
318 static SENSOR_DEVICE_ATTR_RW(in1_min, in_min, 1);
319 static SENSOR_DEVICE_ATTR_RW(in2_min, in_min, 2);
320 static SENSOR_DEVICE_ATTR_RW(in3_min, in_min, 3);
321 static SENSOR_DEVICE_ATTR_RW(in4_min, in_min, 4);
322 static SENSOR_DEVICE_ATTR_RW(in0_max, in_max, 0);
323 static SENSOR_DEVICE_ATTR_RW(in1_max, in_max, 1);
324 static SENSOR_DEVICE_ATTR_RW(in2_max, in_max, 2);
325 static SENSOR_DEVICE_ATTR_RW(in3_max, in_max, 3);
326 static SENSOR_DEVICE_ATTR_RW(in4_max, in_max, 4);
327 
328 #define DIV_FROM_REG(val) (1 << (val))
329 #define FAN_FROM_REG(val, div) ((val) == 0 ? 0 : (480000 / ((val) << (div))))
330 
331 #define FAN_BASE(div)		(480000 >> (div))
332 #define FAN_CLAMP(val, div)	clamp_val(val, FAN_BASE(div) / 255, \
333 					  FAN_BASE(div))
334 #define FAN_TO_REG(val, div)	((val) == 0 ? 0 : \
335 				 DIV_ROUND_CLOSEST(480000, \
336 						FAN_CLAMP(val, div) << (div)))
337 
338 static ssize_t fan_input_show(struct device *dev,
339 			      struct device_attribute *attr, char *buf)
340 {
341 	int n = to_sensor_dev_attr(attr)->index;
342 	struct gl520_data *data = gl520_update_device(dev);
343 
344 	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_input[n],
345 						 data->fan_div[n]));
346 }
347 
348 static ssize_t fan_min_show(struct device *dev, struct device_attribute *attr,
349 			    char *buf)
350 {
351 	int n = to_sensor_dev_attr(attr)->index;
352 	struct gl520_data *data = gl520_update_device(dev);
353 
354 	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[n],
355 						 data->fan_div[n]));
356 }
357 
358 static ssize_t fan_div_show(struct device *dev, struct device_attribute *attr,
359 			    char *buf)
360 {
361 	int n = to_sensor_dev_attr(attr)->index;
362 	struct gl520_data *data = gl520_update_device(dev);
363 
364 	return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[n]));
365 }
366 
367 static ssize_t fan1_off_show(struct device *dev,
368 			     struct device_attribute *attr, char *buf)
369 {
370 	struct gl520_data *data = gl520_update_device(dev);
371 	return sprintf(buf, "%d\n", data->fan_off);
372 }
373 
374 static ssize_t fan_min_store(struct device *dev,
375 			     struct device_attribute *attr, const char *buf,
376 			     size_t count)
377 {
378 	struct gl520_data *data = dev_get_drvdata(dev);
379 	struct i2c_client *client = data->client;
380 	int n = to_sensor_dev_attr(attr)->index;
381 	u8 r;
382 	unsigned long v;
383 	int err;
384 
385 	err = kstrtoul(buf, 10, &v);
386 	if (err)
387 		return err;
388 
389 	mutex_lock(&data->update_lock);
390 	r = FAN_TO_REG(v, data->fan_div[n]);
391 	data->fan_min[n] = r;
392 
393 	if (n == 0)
394 		gl520_write_value(client, GL520_REG_FAN_MIN,
395 				  (gl520_read_value(client, GL520_REG_FAN_MIN)
396 				   & ~0xff00) | (r << 8));
397 	else
398 		gl520_write_value(client, GL520_REG_FAN_MIN,
399 				  (gl520_read_value(client, GL520_REG_FAN_MIN)
400 				   & ~0xff) | r);
401 
402 	data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK);
403 	if (data->fan_min[n] == 0)
404 		data->alarm_mask &= (n == 0) ? ~0x20 : ~0x40;
405 	else
406 		data->alarm_mask |= (n == 0) ? 0x20 : 0x40;
407 	data->beep_mask &= data->alarm_mask;
408 	gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask);
409 
410 	mutex_unlock(&data->update_lock);
411 	return count;
412 }
413 
414 static ssize_t fan_div_store(struct device *dev,
415 			     struct device_attribute *attr, const char *buf,
416 			     size_t count)
417 {
418 	struct gl520_data *data = dev_get_drvdata(dev);
419 	struct i2c_client *client = data->client;
420 	int n = to_sensor_dev_attr(attr)->index;
421 	u8 r;
422 	unsigned long v;
423 	int err;
424 
425 	err = kstrtoul(buf, 10, &v);
426 	if (err)
427 		return err;
428 
429 	switch (v) {
430 	case 1:
431 		r = 0;
432 		break;
433 	case 2:
434 		r = 1;
435 		break;
436 	case 4:
437 		r = 2;
438 		break;
439 	case 8:
440 		r = 3;
441 		break;
442 	default:
443 		dev_err(&client->dev,
444 	"fan_div value %ld not supported. Choose one of 1, 2, 4 or 8!\n", v);
445 		return -EINVAL;
446 	}
447 
448 	mutex_lock(&data->update_lock);
449 	data->fan_div[n] = r;
450 
451 	if (n == 0)
452 		gl520_write_value(client, GL520_REG_FAN_DIV,
453 				  (gl520_read_value(client, GL520_REG_FAN_DIV)
454 				   & ~0xc0) | (r << 6));
455 	else
456 		gl520_write_value(client, GL520_REG_FAN_DIV,
457 				  (gl520_read_value(client, GL520_REG_FAN_DIV)
458 				   & ~0x30) | (r << 4));
459 
460 	mutex_unlock(&data->update_lock);
461 	return count;
462 }
463 
464 static ssize_t fan1_off_store(struct device *dev,
465 			      struct device_attribute *attr, const char *buf,
466 			      size_t count)
467 {
468 	struct gl520_data *data = dev_get_drvdata(dev);
469 	struct i2c_client *client = data->client;
470 	u8 r;
471 	unsigned long v;
472 	int err;
473 
474 	err = kstrtoul(buf, 10, &v);
475 	if (err)
476 		return err;
477 
478 	r = (v ? 1 : 0);
479 
480 	mutex_lock(&data->update_lock);
481 	data->fan_off = r;
482 	gl520_write_value(client, GL520_REG_FAN_OFF,
483 			  (gl520_read_value(client, GL520_REG_FAN_OFF)
484 			   & ~0x0c) | (r << 2));
485 	mutex_unlock(&data->update_lock);
486 	return count;
487 }
488 
489 static SENSOR_DEVICE_ATTR_RO(fan1_input, fan_input, 0);
490 static SENSOR_DEVICE_ATTR_RO(fan2_input, fan_input, 1);
491 static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0);
492 static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1);
493 static SENSOR_DEVICE_ATTR_RW(fan1_div, fan_div, 0);
494 static SENSOR_DEVICE_ATTR_RW(fan2_div, fan_div, 1);
495 static DEVICE_ATTR_RW(fan1_off);
496 
497 #define TEMP_FROM_REG(val)	(((val) - 130) * 1000)
498 #define TEMP_CLAMP(val)		clamp_val(val, -130000, 125000)
499 #define TEMP_TO_REG(val)	(DIV_ROUND_CLOSEST(TEMP_CLAMP(val), 1000) + 130)
500 
501 static ssize_t temp_input_show(struct device *dev,
502 			       struct device_attribute *attr, char *buf)
503 {
504 	int n = to_sensor_dev_attr(attr)->index;
505 	struct gl520_data *data = gl520_update_device(dev);
506 
507 	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_input[n]));
508 }
509 
510 static ssize_t temp_max_show(struct device *dev,
511 			     struct device_attribute *attr, char *buf)
512 {
513 	int n = to_sensor_dev_attr(attr)->index;
514 	struct gl520_data *data = gl520_update_device(dev);
515 
516 	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[n]));
517 }
518 
519 static ssize_t temp_max_hyst_show(struct device *dev,
520 				  struct device_attribute *attr, char *buf)
521 {
522 	int n = to_sensor_dev_attr(attr)->index;
523 	struct gl520_data *data = gl520_update_device(dev);
524 
525 	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max_hyst[n]));
526 }
527 
528 static ssize_t temp_max_store(struct device *dev,
529 			      struct device_attribute *attr, const char *buf,
530 			      size_t count)
531 {
532 	struct gl520_data *data = dev_get_drvdata(dev);
533 	struct i2c_client *client = data->client;
534 	int n = to_sensor_dev_attr(attr)->index;
535 	long v;
536 	int err;
537 
538 	err = kstrtol(buf, 10, &v);
539 	if (err)
540 		return err;
541 
542 	mutex_lock(&data->update_lock);
543 	data->temp_max[n] = TEMP_TO_REG(v);
544 	gl520_write_value(client, GL520_REG_TEMP_MAX[n], data->temp_max[n]);
545 	mutex_unlock(&data->update_lock);
546 	return count;
547 }
548 
549 static ssize_t temp_max_hyst_store(struct device *dev,
550 				   struct device_attribute *attr,
551 				   const char *buf, size_t count)
552 {
553 	struct gl520_data *data = dev_get_drvdata(dev);
554 	struct i2c_client *client = data->client;
555 	int n = to_sensor_dev_attr(attr)->index;
556 	long v;
557 	int err;
558 
559 	err = kstrtol(buf, 10, &v);
560 	if (err)
561 		return err;
562 
563 	mutex_lock(&data->update_lock);
564 	data->temp_max_hyst[n] = TEMP_TO_REG(v);
565 	gl520_write_value(client, GL520_REG_TEMP_MAX_HYST[n],
566 			  data->temp_max_hyst[n]);
567 	mutex_unlock(&data->update_lock);
568 	return count;
569 }
570 
571 static SENSOR_DEVICE_ATTR_RO(temp1_input, temp_input, 0);
572 static SENSOR_DEVICE_ATTR_RO(temp2_input, temp_input, 1);
573 static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0);
574 static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1);
575 static SENSOR_DEVICE_ATTR_RW(temp1_max_hyst, temp_max_hyst, 0);
576 static SENSOR_DEVICE_ATTR_RW(temp2_max_hyst, temp_max_hyst, 1);
577 
578 static ssize_t alarms_show(struct device *dev, struct device_attribute *attr,
579 			   char *buf)
580 {
581 	struct gl520_data *data = gl520_update_device(dev);
582 	return sprintf(buf, "%d\n", data->alarms);
583 }
584 
585 static ssize_t beep_enable_show(struct device *dev,
586 				struct device_attribute *attr, char *buf)
587 {
588 	struct gl520_data *data = gl520_update_device(dev);
589 	return sprintf(buf, "%d\n", data->beep_enable);
590 }
591 
592 static ssize_t beep_mask_show(struct device *dev,
593 			      struct device_attribute *attr, char *buf)
594 {
595 	struct gl520_data *data = gl520_update_device(dev);
596 	return sprintf(buf, "%d\n", data->beep_mask);
597 }
598 
599 static ssize_t beep_enable_store(struct device *dev,
600 				 struct device_attribute *attr,
601 				 const char *buf, size_t count)
602 {
603 	struct gl520_data *data = dev_get_drvdata(dev);
604 	struct i2c_client *client = data->client;
605 	u8 r;
606 	unsigned long v;
607 	int err;
608 
609 	err = kstrtoul(buf, 10, &v);
610 	if (err)
611 		return err;
612 
613 	r = (v ? 0 : 1);
614 
615 	mutex_lock(&data->update_lock);
616 	data->beep_enable = !r;
617 	gl520_write_value(client, GL520_REG_BEEP_ENABLE,
618 			  (gl520_read_value(client, GL520_REG_BEEP_ENABLE)
619 			   & ~0x04) | (r << 2));
620 	mutex_unlock(&data->update_lock);
621 	return count;
622 }
623 
624 static ssize_t beep_mask_store(struct device *dev,
625 			       struct device_attribute *attr, const char *buf,
626 			       size_t count)
627 {
628 	struct gl520_data *data = dev_get_drvdata(dev);
629 	struct i2c_client *client = data->client;
630 	unsigned long r;
631 	int err;
632 
633 	err = kstrtoul(buf, 10, &r);
634 	if (err)
635 		return err;
636 
637 	mutex_lock(&data->update_lock);
638 	r &= data->alarm_mask;
639 	data->beep_mask = r;
640 	gl520_write_value(client, GL520_REG_BEEP_MASK, r);
641 	mutex_unlock(&data->update_lock);
642 	return count;
643 }
644 
645 static DEVICE_ATTR_RO(alarms);
646 static DEVICE_ATTR_RW(beep_enable);
647 static DEVICE_ATTR_RW(beep_mask);
648 
649 static ssize_t alarm_show(struct device *dev, struct device_attribute *attr,
650 			  char *buf)
651 {
652 	int bit_nr = to_sensor_dev_attr(attr)->index;
653 	struct gl520_data *data = gl520_update_device(dev);
654 
655 	return sprintf(buf, "%d\n", (data->alarms >> bit_nr) & 1);
656 }
657 
658 static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 0);
659 static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 1);
660 static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 2);
661 static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 3);
662 static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 4);
663 static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 5);
664 static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 6);
665 static SENSOR_DEVICE_ATTR_RO(temp2_alarm, alarm, 7);
666 static SENSOR_DEVICE_ATTR_RO(in4_alarm, alarm, 7);
667 
668 static ssize_t beep_show(struct device *dev, struct device_attribute *attr,
669 			 char *buf)
670 {
671 	int bitnr = to_sensor_dev_attr(attr)->index;
672 	struct gl520_data *data = gl520_update_device(dev);
673 
674 	return sprintf(buf, "%d\n", (data->beep_mask >> bitnr) & 1);
675 }
676 
677 static ssize_t beep_store(struct device *dev, struct device_attribute *attr,
678 			  const char *buf, size_t count)
679 {
680 	struct gl520_data *data = dev_get_drvdata(dev);
681 	struct i2c_client *client = data->client;
682 	int bitnr = to_sensor_dev_attr(attr)->index;
683 	unsigned long bit;
684 
685 	int err;
686 
687 	err = kstrtoul(buf, 10, &bit);
688 	if (err)
689 		return err;
690 	if (bit & ~1)
691 		return -EINVAL;
692 
693 	mutex_lock(&data->update_lock);
694 	data->beep_mask = gl520_read_value(client, GL520_REG_BEEP_MASK);
695 	if (bit)
696 		data->beep_mask |= (1 << bitnr);
697 	else
698 		data->beep_mask &= ~(1 << bitnr);
699 	gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask);
700 	mutex_unlock(&data->update_lock);
701 	return count;
702 }
703 
704 static SENSOR_DEVICE_ATTR_RW(in0_beep, beep, 0);
705 static SENSOR_DEVICE_ATTR_RW(in1_beep, beep, 1);
706 static SENSOR_DEVICE_ATTR_RW(in2_beep, beep, 2);
707 static SENSOR_DEVICE_ATTR_RW(in3_beep, beep, 3);
708 static SENSOR_DEVICE_ATTR_RW(temp1_beep, beep, 4);
709 static SENSOR_DEVICE_ATTR_RW(fan1_beep, beep, 5);
710 static SENSOR_DEVICE_ATTR_RW(fan2_beep, beep, 6);
711 static SENSOR_DEVICE_ATTR_RW(temp2_beep, beep, 7);
712 static SENSOR_DEVICE_ATTR_RW(in4_beep, beep, 7);
713 
714 static struct attribute *gl520_attributes[] = {
715 	&dev_attr_cpu0_vid.attr,
716 
717 	&sensor_dev_attr_in0_input.dev_attr.attr,
718 	&sensor_dev_attr_in0_min.dev_attr.attr,
719 	&sensor_dev_attr_in0_max.dev_attr.attr,
720 	&sensor_dev_attr_in0_alarm.dev_attr.attr,
721 	&sensor_dev_attr_in0_beep.dev_attr.attr,
722 	&sensor_dev_attr_in1_input.dev_attr.attr,
723 	&sensor_dev_attr_in1_min.dev_attr.attr,
724 	&sensor_dev_attr_in1_max.dev_attr.attr,
725 	&sensor_dev_attr_in1_alarm.dev_attr.attr,
726 	&sensor_dev_attr_in1_beep.dev_attr.attr,
727 	&sensor_dev_attr_in2_input.dev_attr.attr,
728 	&sensor_dev_attr_in2_min.dev_attr.attr,
729 	&sensor_dev_attr_in2_max.dev_attr.attr,
730 	&sensor_dev_attr_in2_alarm.dev_attr.attr,
731 	&sensor_dev_attr_in2_beep.dev_attr.attr,
732 	&sensor_dev_attr_in3_input.dev_attr.attr,
733 	&sensor_dev_attr_in3_min.dev_attr.attr,
734 	&sensor_dev_attr_in3_max.dev_attr.attr,
735 	&sensor_dev_attr_in3_alarm.dev_attr.attr,
736 	&sensor_dev_attr_in3_beep.dev_attr.attr,
737 
738 	&sensor_dev_attr_fan1_input.dev_attr.attr,
739 	&sensor_dev_attr_fan1_min.dev_attr.attr,
740 	&sensor_dev_attr_fan1_div.dev_attr.attr,
741 	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
742 	&sensor_dev_attr_fan1_beep.dev_attr.attr,
743 	&dev_attr_fan1_off.attr,
744 	&sensor_dev_attr_fan2_input.dev_attr.attr,
745 	&sensor_dev_attr_fan2_min.dev_attr.attr,
746 	&sensor_dev_attr_fan2_div.dev_attr.attr,
747 	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
748 	&sensor_dev_attr_fan2_beep.dev_attr.attr,
749 
750 	&sensor_dev_attr_temp1_input.dev_attr.attr,
751 	&sensor_dev_attr_temp1_max.dev_attr.attr,
752 	&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
753 	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
754 	&sensor_dev_attr_temp1_beep.dev_attr.attr,
755 
756 	&dev_attr_alarms.attr,
757 	&dev_attr_beep_enable.attr,
758 	&dev_attr_beep_mask.attr,
759 	NULL
760 };
761 
762 static const struct attribute_group gl520_group = {
763 	.attrs = gl520_attributes,
764 };
765 
766 static struct attribute *gl520_attributes_in4[] = {
767 	&sensor_dev_attr_in4_input.dev_attr.attr,
768 	&sensor_dev_attr_in4_min.dev_attr.attr,
769 	&sensor_dev_attr_in4_max.dev_attr.attr,
770 	&sensor_dev_attr_in4_alarm.dev_attr.attr,
771 	&sensor_dev_attr_in4_beep.dev_attr.attr,
772 	NULL
773 };
774 
775 static struct attribute *gl520_attributes_temp2[] = {
776 	&sensor_dev_attr_temp2_input.dev_attr.attr,
777 	&sensor_dev_attr_temp2_max.dev_attr.attr,
778 	&sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
779 	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
780 	&sensor_dev_attr_temp2_beep.dev_attr.attr,
781 	NULL
782 };
783 
784 static const struct attribute_group gl520_group_in4 = {
785 	.attrs = gl520_attributes_in4,
786 };
787 
788 static const struct attribute_group gl520_group_temp2 = {
789 	.attrs = gl520_attributes_temp2,
790 };
791 
792 
793 /*
794  * Real code
795  */
796 
797 /* Return 0 if detection is successful, -ENODEV otherwise */
798 static int gl520_detect(struct i2c_client *client, struct i2c_board_info *info)
799 {
800 	struct i2c_adapter *adapter = client->adapter;
801 
802 	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
803 				     I2C_FUNC_SMBUS_WORD_DATA))
804 		return -ENODEV;
805 
806 	/* Determine the chip type. */
807 	if ((gl520_read_value(client, GL520_REG_CHIP_ID) != 0x20) ||
808 	    ((gl520_read_value(client, GL520_REG_REVISION) & 0x7f) != 0x00) ||
809 	    ((gl520_read_value(client, GL520_REG_CONF) & 0x80) != 0x00)) {
810 		dev_dbg(&client->dev, "Unknown chip type, skipping\n");
811 		return -ENODEV;
812 	}
813 
814 	strscpy(info->type, "gl520sm", I2C_NAME_SIZE);
815 
816 	return 0;
817 }
818 
819 /* Called when we have found a new GL520SM. */
820 static void gl520_init_client(struct i2c_client *client)
821 {
822 	struct gl520_data *data = i2c_get_clientdata(client);
823 	u8 oldconf, conf;
824 
825 	conf = oldconf = gl520_read_value(client, GL520_REG_CONF);
826 
827 	data->alarm_mask = 0xff;
828 	data->vrm = vid_which_vrm();
829 
830 	if (extra_sensor_type == 1)
831 		conf &= ~0x10;
832 	else if (extra_sensor_type == 2)
833 		conf |= 0x10;
834 	data->two_temps = !(conf & 0x10);
835 
836 	/* If IRQ# is disabled, we can safely force comparator mode */
837 	if (!(conf & 0x20))
838 		conf &= 0xf7;
839 
840 	/* Enable monitoring if needed */
841 	conf |= 0x40;
842 
843 	if (conf != oldconf)
844 		gl520_write_value(client, GL520_REG_CONF, conf);
845 
846 	gl520_update_device(&(client->dev));
847 
848 	if (data->fan_min[0] == 0)
849 		data->alarm_mask &= ~0x20;
850 	if (data->fan_min[1] == 0)
851 		data->alarm_mask &= ~0x40;
852 
853 	data->beep_mask &= data->alarm_mask;
854 	gl520_write_value(client, GL520_REG_BEEP_MASK, data->beep_mask);
855 }
856 
857 static int gl520_probe(struct i2c_client *client)
858 {
859 	struct device *dev = &client->dev;
860 	struct device *hwmon_dev;
861 	struct gl520_data *data;
862 
863 	data = devm_kzalloc(dev, sizeof(struct gl520_data), GFP_KERNEL);
864 	if (!data)
865 		return -ENOMEM;
866 
867 	i2c_set_clientdata(client, data);
868 	mutex_init(&data->update_lock);
869 	data->client = client;
870 
871 	/* Initialize the GL520SM chip */
872 	gl520_init_client(client);
873 
874 	/* sysfs hooks */
875 	data->groups[0] = &gl520_group;
876 
877 	if (data->two_temps)
878 		data->groups[1] = &gl520_group_temp2;
879 	else
880 		data->groups[1] = &gl520_group_in4;
881 
882 	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
883 							   data, data->groups);
884 	return PTR_ERR_OR_ZERO(hwmon_dev);
885 }
886 
887 static const struct i2c_device_id gl520_id[] = {
888 	{ "gl520sm", 0 },
889 	{ }
890 };
891 MODULE_DEVICE_TABLE(i2c, gl520_id);
892 
893 static struct i2c_driver gl520_driver = {
894 	.class		= I2C_CLASS_HWMON,
895 	.driver = {
896 		.name	= "gl520sm",
897 	},
898 	.probe		= gl520_probe,
899 	.id_table	= gl520_id,
900 	.detect		= gl520_detect,
901 	.address_list	= normal_i2c,
902 };
903 
904 module_i2c_driver(gl520_driver);
905 
906 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
907 	"Kyösti Mälkki <kmalkki@cc.hut.fi>, "
908 	"Maarten Deprez <maartendeprez@users.sourceforge.net>");
909 MODULE_DESCRIPTION("GL520SM driver");
910 MODULE_LICENSE("GPL");
911