1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * f75375s.c - driver for the Fintek F75375/SP, F75373 and 4 * F75387SG/RG hardware monitoring features 5 * Copyright (C) 2006-2007 Riku Voipio 6 * 7 * Datasheets available at: 8 * 9 * f75375: 10 * http://www.fintek.com.tw/files/productfiles/F75375_V026P.pdf 11 * 12 * f75373: 13 * http://www.fintek.com.tw/files/productfiles/F75373_V025P.pdf 14 * 15 * f75387: 16 * http://www.fintek.com.tw/files/productfiles/F75387_V027P.pdf 17 */ 18 19 #include <linux/module.h> 20 #include <linux/jiffies.h> 21 #include <linux/hwmon.h> 22 #include <linux/hwmon-sysfs.h> 23 #include <linux/i2c.h> 24 #include <linux/err.h> 25 #include <linux/mutex.h> 26 #include <linux/f75375s.h> 27 #include <linux/slab.h> 28 29 /* Addresses to scan */ 30 static const unsigned short normal_i2c[] = { 0x2d, 0x2e, I2C_CLIENT_END }; 31 32 enum chips { f75373, f75375, f75387 }; 33 34 /* Fintek F75375 registers */ 35 #define F75375_REG_CONFIG0 0x0 36 #define F75375_REG_CONFIG1 0x1 37 #define F75375_REG_CONFIG2 0x2 38 #define F75375_REG_CONFIG3 0x3 39 #define F75375_REG_ADDR 0x4 40 #define F75375_REG_INTR 0x31 41 #define F75375_CHIP_ID 0x5A 42 #define F75375_REG_VERSION 0x5C 43 #define F75375_REG_VENDOR 0x5D 44 #define F75375_REG_FAN_TIMER 0x60 45 46 #define F75375_REG_VOLT(nr) (0x10 + (nr)) 47 #define F75375_REG_VOLT_HIGH(nr) (0x20 + (nr) * 2) 48 #define F75375_REG_VOLT_LOW(nr) (0x21 + (nr) * 2) 49 50 #define F75375_REG_TEMP(nr) (0x14 + (nr)) 51 #define F75387_REG_TEMP11_LSB(nr) (0x1a + (nr)) 52 #define F75375_REG_TEMP_HIGH(nr) (0x28 + (nr) * 2) 53 #define F75375_REG_TEMP_HYST(nr) (0x29 + (nr) * 2) 54 55 #define F75375_REG_FAN(nr) (0x16 + (nr) * 2) 56 #define F75375_REG_FAN_MIN(nr) (0x2C + (nr) * 2) 57 #define F75375_REG_FAN_FULL(nr) (0x70 + (nr) * 0x10) 58 #define F75375_REG_FAN_PWM_DUTY(nr) (0x76 + (nr) * 0x10) 59 #define F75375_REG_FAN_PWM_CLOCK(nr) (0x7D + (nr) * 0x10) 60 61 #define F75375_REG_FAN_EXP(nr) (0x74 + (nr) * 0x10) 62 #define F75375_REG_FAN_B_TEMP(nr, step) ((0xA0 + (nr) * 0x10) + (step)) 63 #define F75375_REG_FAN_B_SPEED(nr, step) \ 64 ((0xA5 + (nr) * 0x10) + (step) * 2) 65 66 #define F75375_REG_PWM1_RAISE_DUTY 0x69 67 #define F75375_REG_PWM2_RAISE_DUTY 0x6A 68 #define F75375_REG_PWM1_DROP_DUTY 0x6B 69 #define F75375_REG_PWM2_DROP_DUTY 0x6C 70 71 #define F75375_FAN_CTRL_LINEAR(nr) (4 + nr) 72 #define F75387_FAN_CTRL_LINEAR(nr) (1 + ((nr) * 4)) 73 #define FAN_CTRL_MODE(nr) (4 + ((nr) * 2)) 74 #define F75387_FAN_DUTY_MODE(nr) (2 + ((nr) * 4)) 75 #define F75387_FAN_MANU_MODE(nr) ((nr) * 4) 76 77 /* 78 * Data structures and manipulation thereof 79 */ 80 81 struct f75375_data { 82 unsigned short addr; 83 struct device *hwmon_dev; 84 85 const char *name; 86 int kind; 87 struct mutex update_lock; /* protect register access */ 88 bool valid; 89 unsigned long last_updated; /* In jiffies */ 90 unsigned long last_limits; /* In jiffies */ 91 92 /* Register values */ 93 u8 in[4]; 94 u8 in_max[4]; 95 u8 in_min[4]; 96 u16 fan[2]; 97 u16 fan_min[2]; 98 u16 fan_max[2]; 99 u16 fan_target[2]; 100 u8 fan_timer; 101 u8 pwm[2]; 102 u8 pwm_mode[2]; 103 u8 pwm_enable[2]; 104 /* 105 * f75387: For remote temperature reading, it uses signed 11-bit 106 * values with LSB = 0.125 degree Celsius, left-justified in 16-bit 107 * registers. For original 8-bit temp readings, the LSB just is 0. 108 */ 109 s16 temp11[2]; 110 s8 temp_high[2]; 111 s8 temp_max_hyst[2]; 112 }; 113 114 static int f75375_detect(struct i2c_client *client, 115 struct i2c_board_info *info); 116 static int f75375_probe(struct i2c_client *client); 117 static void f75375_remove(struct i2c_client *client); 118 119 static const struct i2c_device_id f75375_id[] = { 120 { "f75373", f75373 }, 121 { "f75375", f75375 }, 122 { "f75387", f75387 }, 123 { } 124 }; 125 MODULE_DEVICE_TABLE(i2c, f75375_id); 126 127 static struct i2c_driver f75375_driver = { 128 .class = I2C_CLASS_HWMON, 129 .driver = { 130 .name = "f75375", 131 }, 132 .probe = f75375_probe, 133 .remove = f75375_remove, 134 .id_table = f75375_id, 135 .detect = f75375_detect, 136 .address_list = normal_i2c, 137 }; 138 139 static inline int f75375_read8(struct i2c_client *client, u8 reg) 140 { 141 return i2c_smbus_read_byte_data(client, reg); 142 } 143 144 /* in most cases, should be called while holding update_lock */ 145 static inline u16 f75375_read16(struct i2c_client *client, u8 reg) 146 { 147 return (i2c_smbus_read_byte_data(client, reg) << 8) 148 | i2c_smbus_read_byte_data(client, reg + 1); 149 } 150 151 static inline void f75375_write8(struct i2c_client *client, u8 reg, 152 u8 value) 153 { 154 i2c_smbus_write_byte_data(client, reg, value); 155 } 156 157 static inline void f75375_write16(struct i2c_client *client, u8 reg, 158 u16 value) 159 { 160 int err = i2c_smbus_write_byte_data(client, reg, (value >> 8)); 161 if (err) 162 return; 163 i2c_smbus_write_byte_data(client, reg + 1, (value & 0xFF)); 164 } 165 166 static void f75375_write_pwm(struct i2c_client *client, int nr) 167 { 168 struct f75375_data *data = i2c_get_clientdata(client); 169 if (data->kind == f75387) 170 f75375_write16(client, F75375_REG_FAN_EXP(nr), data->pwm[nr]); 171 else 172 f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), 173 data->pwm[nr]); 174 } 175 176 static struct f75375_data *f75375_update_device(struct device *dev) 177 { 178 struct i2c_client *client = to_i2c_client(dev); 179 struct f75375_data *data = i2c_get_clientdata(client); 180 int nr; 181 182 mutex_lock(&data->update_lock); 183 184 /* Limit registers cache is refreshed after 60 seconds */ 185 if (time_after(jiffies, data->last_limits + 60 * HZ) 186 || !data->valid) { 187 for (nr = 0; nr < 2; nr++) { 188 data->temp_high[nr] = 189 f75375_read8(client, F75375_REG_TEMP_HIGH(nr)); 190 data->temp_max_hyst[nr] = 191 f75375_read8(client, F75375_REG_TEMP_HYST(nr)); 192 data->fan_max[nr] = 193 f75375_read16(client, F75375_REG_FAN_FULL(nr)); 194 data->fan_min[nr] = 195 f75375_read16(client, F75375_REG_FAN_MIN(nr)); 196 data->fan_target[nr] = 197 f75375_read16(client, F75375_REG_FAN_EXP(nr)); 198 } 199 for (nr = 0; nr < 4; nr++) { 200 data->in_max[nr] = 201 f75375_read8(client, F75375_REG_VOLT_HIGH(nr)); 202 data->in_min[nr] = 203 f75375_read8(client, F75375_REG_VOLT_LOW(nr)); 204 } 205 data->fan_timer = f75375_read8(client, F75375_REG_FAN_TIMER); 206 data->last_limits = jiffies; 207 } 208 209 /* Measurement registers cache is refreshed after 2 second */ 210 if (time_after(jiffies, data->last_updated + 2 * HZ) 211 || !data->valid) { 212 for (nr = 0; nr < 2; nr++) { 213 data->pwm[nr] = f75375_read8(client, 214 F75375_REG_FAN_PWM_DUTY(nr)); 215 /* assign MSB, therefore shift it by 8 bits */ 216 data->temp11[nr] = 217 f75375_read8(client, F75375_REG_TEMP(nr)) << 8; 218 if (data->kind == f75387) 219 /* merge F75387's temperature LSB (11-bit) */ 220 data->temp11[nr] |= 221 f75375_read8(client, 222 F75387_REG_TEMP11_LSB(nr)); 223 data->fan[nr] = 224 f75375_read16(client, F75375_REG_FAN(nr)); 225 } 226 for (nr = 0; nr < 4; nr++) 227 data->in[nr] = 228 f75375_read8(client, F75375_REG_VOLT(nr)); 229 230 data->last_updated = jiffies; 231 data->valid = true; 232 } 233 234 mutex_unlock(&data->update_lock); 235 return data; 236 } 237 238 static inline u16 rpm_from_reg(u16 reg) 239 { 240 if (reg == 0 || reg == 0xffff) 241 return 0; 242 return 1500000 / reg; 243 } 244 245 static inline u16 rpm_to_reg(int rpm) 246 { 247 if (rpm < 367 || rpm > 0xffff) 248 return 0xffff; 249 return 1500000 / rpm; 250 } 251 252 static bool duty_mode_enabled(u8 pwm_enable) 253 { 254 switch (pwm_enable) { 255 case 0: /* Manual, duty mode (full speed) */ 256 case 1: /* Manual, duty mode */ 257 case 4: /* Auto, duty mode */ 258 return true; 259 case 2: /* Auto, speed mode */ 260 case 3: /* Manual, speed mode */ 261 return false; 262 default: 263 WARN(1, "Unexpected pwm_enable value %d\n", pwm_enable); 264 return true; 265 } 266 } 267 268 static bool auto_mode_enabled(u8 pwm_enable) 269 { 270 switch (pwm_enable) { 271 case 0: /* Manual, duty mode (full speed) */ 272 case 1: /* Manual, duty mode */ 273 case 3: /* Manual, speed mode */ 274 return false; 275 case 2: /* Auto, speed mode */ 276 case 4: /* Auto, duty mode */ 277 return true; 278 default: 279 WARN(1, "Unexpected pwm_enable value %d\n", pwm_enable); 280 return false; 281 } 282 } 283 284 static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr, 285 const char *buf, size_t count) 286 { 287 int nr = to_sensor_dev_attr(attr)->index; 288 struct i2c_client *client = to_i2c_client(dev); 289 struct f75375_data *data = i2c_get_clientdata(client); 290 unsigned long val; 291 int err; 292 293 err = kstrtoul(buf, 10, &val); 294 if (err < 0) 295 return err; 296 297 mutex_lock(&data->update_lock); 298 data->fan_min[nr] = rpm_to_reg(val); 299 f75375_write16(client, F75375_REG_FAN_MIN(nr), data->fan_min[nr]); 300 mutex_unlock(&data->update_lock); 301 return count; 302 } 303 304 static ssize_t set_fan_target(struct device *dev, struct device_attribute *attr, 305 const char *buf, size_t count) 306 { 307 int nr = to_sensor_dev_attr(attr)->index; 308 struct i2c_client *client = to_i2c_client(dev); 309 struct f75375_data *data = i2c_get_clientdata(client); 310 unsigned long val; 311 int err; 312 313 err = kstrtoul(buf, 10, &val); 314 if (err < 0) 315 return err; 316 317 if (auto_mode_enabled(data->pwm_enable[nr])) 318 return -EINVAL; 319 if (data->kind == f75387 && duty_mode_enabled(data->pwm_enable[nr])) 320 return -EINVAL; 321 322 mutex_lock(&data->update_lock); 323 data->fan_target[nr] = rpm_to_reg(val); 324 f75375_write16(client, F75375_REG_FAN_EXP(nr), data->fan_target[nr]); 325 mutex_unlock(&data->update_lock); 326 return count; 327 } 328 329 static ssize_t set_pwm(struct device *dev, struct device_attribute *attr, 330 const char *buf, size_t count) 331 { 332 int nr = to_sensor_dev_attr(attr)->index; 333 struct i2c_client *client = to_i2c_client(dev); 334 struct f75375_data *data = i2c_get_clientdata(client); 335 unsigned long val; 336 int err; 337 338 err = kstrtoul(buf, 10, &val); 339 if (err < 0) 340 return err; 341 342 if (auto_mode_enabled(data->pwm_enable[nr]) || 343 !duty_mode_enabled(data->pwm_enable[nr])) 344 return -EINVAL; 345 346 mutex_lock(&data->update_lock); 347 data->pwm[nr] = clamp_val(val, 0, 255); 348 f75375_write_pwm(client, nr); 349 mutex_unlock(&data->update_lock); 350 return count; 351 } 352 353 static ssize_t show_pwm_enable(struct device *dev, struct device_attribute 354 *attr, char *buf) 355 { 356 int nr = to_sensor_dev_attr(attr)->index; 357 struct f75375_data *data = f75375_update_device(dev); 358 return sprintf(buf, "%d\n", data->pwm_enable[nr]); 359 } 360 361 static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val) 362 { 363 struct f75375_data *data = i2c_get_clientdata(client); 364 u8 fanmode; 365 366 if (val < 0 || val > 4) 367 return -EINVAL; 368 369 fanmode = f75375_read8(client, F75375_REG_FAN_TIMER); 370 if (data->kind == f75387) { 371 /* For now, deny dangerous toggling of duty mode */ 372 if (duty_mode_enabled(data->pwm_enable[nr]) != 373 duty_mode_enabled(val)) 374 return -EOPNOTSUPP; 375 /* clear each fanX_mode bit before setting them properly */ 376 fanmode &= ~(1 << F75387_FAN_DUTY_MODE(nr)); 377 fanmode &= ~(1 << F75387_FAN_MANU_MODE(nr)); 378 switch (val) { 379 case 0: /* full speed */ 380 fanmode |= (1 << F75387_FAN_MANU_MODE(nr)); 381 fanmode |= (1 << F75387_FAN_DUTY_MODE(nr)); 382 data->pwm[nr] = 255; 383 break; 384 case 1: /* PWM */ 385 fanmode |= (1 << F75387_FAN_MANU_MODE(nr)); 386 fanmode |= (1 << F75387_FAN_DUTY_MODE(nr)); 387 break; 388 case 2: /* Automatic, speed mode */ 389 break; 390 case 3: /* fan speed */ 391 fanmode |= (1 << F75387_FAN_MANU_MODE(nr)); 392 break; 393 case 4: /* Automatic, pwm */ 394 fanmode |= (1 << F75387_FAN_DUTY_MODE(nr)); 395 break; 396 } 397 } else { 398 /* clear each fanX_mode bit before setting them properly */ 399 fanmode &= ~(3 << FAN_CTRL_MODE(nr)); 400 switch (val) { 401 case 0: /* full speed */ 402 fanmode |= (3 << FAN_CTRL_MODE(nr)); 403 data->pwm[nr] = 255; 404 break; 405 case 1: /* PWM */ 406 fanmode |= (3 << FAN_CTRL_MODE(nr)); 407 break; 408 case 2: /* AUTOMATIC*/ 409 fanmode |= (1 << FAN_CTRL_MODE(nr)); 410 break; 411 case 3: /* fan speed */ 412 break; 413 case 4: /* Automatic pwm */ 414 return -EINVAL; 415 } 416 } 417 418 f75375_write8(client, F75375_REG_FAN_TIMER, fanmode); 419 data->pwm_enable[nr] = val; 420 if (val == 0) 421 f75375_write_pwm(client, nr); 422 return 0; 423 } 424 425 static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr, 426 const char *buf, size_t count) 427 { 428 int nr = to_sensor_dev_attr(attr)->index; 429 struct i2c_client *client = to_i2c_client(dev); 430 struct f75375_data *data = i2c_get_clientdata(client); 431 unsigned long val; 432 int err; 433 434 err = kstrtoul(buf, 10, &val); 435 if (err < 0) 436 return err; 437 438 mutex_lock(&data->update_lock); 439 err = set_pwm_enable_direct(client, nr, val); 440 mutex_unlock(&data->update_lock); 441 return err ? err : count; 442 } 443 444 static ssize_t set_pwm_mode(struct device *dev, struct device_attribute *attr, 445 const char *buf, size_t count) 446 { 447 int nr = to_sensor_dev_attr(attr)->index; 448 struct i2c_client *client = to_i2c_client(dev); 449 struct f75375_data *data = i2c_get_clientdata(client); 450 unsigned long val; 451 int err; 452 u8 conf; 453 char reg, ctrl; 454 455 err = kstrtoul(buf, 10, &val); 456 if (err < 0) 457 return err; 458 459 if (!(val == 0 || val == 1)) 460 return -EINVAL; 461 462 /* F75373 does not support DC (linear voltage) fan control mode */ 463 if (data->kind == f75373 && val == 0) 464 return -EINVAL; 465 466 /* take care for different registers */ 467 if (data->kind == f75387) { 468 reg = F75375_REG_FAN_TIMER; 469 ctrl = F75387_FAN_CTRL_LINEAR(nr); 470 } else { 471 reg = F75375_REG_CONFIG1; 472 ctrl = F75375_FAN_CTRL_LINEAR(nr); 473 } 474 475 mutex_lock(&data->update_lock); 476 conf = f75375_read8(client, reg); 477 conf &= ~(1 << ctrl); 478 479 if (val == 0) 480 conf |= (1 << ctrl); 481 482 f75375_write8(client, reg, conf); 483 data->pwm_mode[nr] = val; 484 mutex_unlock(&data->update_lock); 485 return count; 486 } 487 488 static ssize_t show_pwm(struct device *dev, struct device_attribute 489 *attr, char *buf) 490 { 491 int nr = to_sensor_dev_attr(attr)->index; 492 struct f75375_data *data = f75375_update_device(dev); 493 return sprintf(buf, "%d\n", data->pwm[nr]); 494 } 495 496 static ssize_t show_pwm_mode(struct device *dev, struct device_attribute 497 *attr, char *buf) 498 { 499 int nr = to_sensor_dev_attr(attr)->index; 500 struct f75375_data *data = f75375_update_device(dev); 501 return sprintf(buf, "%d\n", data->pwm_mode[nr]); 502 } 503 504 #define VOLT_FROM_REG(val) ((val) * 8) 505 #define VOLT_TO_REG(val) ((val) / 8) 506 507 static ssize_t show_in(struct device *dev, struct device_attribute *attr, 508 char *buf) 509 { 510 int nr = to_sensor_dev_attr(attr)->index; 511 struct f75375_data *data = f75375_update_device(dev); 512 return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in[nr])); 513 } 514 515 static ssize_t show_in_max(struct device *dev, struct device_attribute *attr, 516 char *buf) 517 { 518 int nr = to_sensor_dev_attr(attr)->index; 519 struct f75375_data *data = f75375_update_device(dev); 520 return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in_max[nr])); 521 } 522 523 static ssize_t show_in_min(struct device *dev, struct device_attribute *attr, 524 char *buf) 525 { 526 int nr = to_sensor_dev_attr(attr)->index; 527 struct f75375_data *data = f75375_update_device(dev); 528 return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in_min[nr])); 529 } 530 531 static ssize_t set_in_max(struct device *dev, struct device_attribute *attr, 532 const char *buf, size_t count) 533 { 534 int nr = to_sensor_dev_attr(attr)->index; 535 struct i2c_client *client = to_i2c_client(dev); 536 struct f75375_data *data = i2c_get_clientdata(client); 537 unsigned long val; 538 int err; 539 540 err = kstrtoul(buf, 10, &val); 541 if (err < 0) 542 return err; 543 544 val = clamp_val(VOLT_TO_REG(val), 0, 0xff); 545 mutex_lock(&data->update_lock); 546 data->in_max[nr] = val; 547 f75375_write8(client, F75375_REG_VOLT_HIGH(nr), data->in_max[nr]); 548 mutex_unlock(&data->update_lock); 549 return count; 550 } 551 552 static ssize_t set_in_min(struct device *dev, struct device_attribute *attr, 553 const char *buf, size_t count) 554 { 555 int nr = to_sensor_dev_attr(attr)->index; 556 struct i2c_client *client = to_i2c_client(dev); 557 struct f75375_data *data = i2c_get_clientdata(client); 558 unsigned long val; 559 int err; 560 561 err = kstrtoul(buf, 10, &val); 562 if (err < 0) 563 return err; 564 565 val = clamp_val(VOLT_TO_REG(val), 0, 0xff); 566 mutex_lock(&data->update_lock); 567 data->in_min[nr] = val; 568 f75375_write8(client, F75375_REG_VOLT_LOW(nr), data->in_min[nr]); 569 mutex_unlock(&data->update_lock); 570 return count; 571 } 572 #define TEMP_FROM_REG(val) ((val) * 1000) 573 #define TEMP_TO_REG(val) ((val) / 1000) 574 #define TEMP11_FROM_REG(reg) ((reg) / 32 * 125) 575 576 static ssize_t show_temp11(struct device *dev, struct device_attribute *attr, 577 char *buf) 578 { 579 int nr = to_sensor_dev_attr(attr)->index; 580 struct f75375_data *data = f75375_update_device(dev); 581 return sprintf(buf, "%d\n", TEMP11_FROM_REG(data->temp11[nr])); 582 } 583 584 static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr, 585 char *buf) 586 { 587 int nr = to_sensor_dev_attr(attr)->index; 588 struct f75375_data *data = f75375_update_device(dev); 589 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr])); 590 } 591 592 static ssize_t show_temp_max_hyst(struct device *dev, 593 struct device_attribute *attr, char *buf) 594 { 595 int nr = to_sensor_dev_attr(attr)->index; 596 struct f75375_data *data = f75375_update_device(dev); 597 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max_hyst[nr])); 598 } 599 600 static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr, 601 const char *buf, size_t count) 602 { 603 int nr = to_sensor_dev_attr(attr)->index; 604 struct i2c_client *client = to_i2c_client(dev); 605 struct f75375_data *data = i2c_get_clientdata(client); 606 unsigned long val; 607 int err; 608 609 err = kstrtoul(buf, 10, &val); 610 if (err < 0) 611 return err; 612 613 val = clamp_val(TEMP_TO_REG(val), 0, 127); 614 mutex_lock(&data->update_lock); 615 data->temp_high[nr] = val; 616 f75375_write8(client, F75375_REG_TEMP_HIGH(nr), data->temp_high[nr]); 617 mutex_unlock(&data->update_lock); 618 return count; 619 } 620 621 static ssize_t set_temp_max_hyst(struct device *dev, 622 struct device_attribute *attr, const char *buf, size_t count) 623 { 624 int nr = to_sensor_dev_attr(attr)->index; 625 struct i2c_client *client = to_i2c_client(dev); 626 struct f75375_data *data = i2c_get_clientdata(client); 627 unsigned long val; 628 int err; 629 630 err = kstrtoul(buf, 10, &val); 631 if (err < 0) 632 return err; 633 634 val = clamp_val(TEMP_TO_REG(val), 0, 127); 635 mutex_lock(&data->update_lock); 636 data->temp_max_hyst[nr] = val; 637 f75375_write8(client, F75375_REG_TEMP_HYST(nr), 638 data->temp_max_hyst[nr]); 639 mutex_unlock(&data->update_lock); 640 return count; 641 } 642 643 #define show_fan(thing) \ 644 static ssize_t show_##thing(struct device *dev, struct device_attribute *attr, \ 645 char *buf)\ 646 {\ 647 int nr = to_sensor_dev_attr(attr)->index;\ 648 struct f75375_data *data = f75375_update_device(dev); \ 649 return sprintf(buf, "%d\n", rpm_from_reg(data->thing[nr])); \ 650 } 651 652 show_fan(fan); 653 show_fan(fan_min); 654 show_fan(fan_max); 655 show_fan(fan_target); 656 657 static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in, NULL, 0); 658 static SENSOR_DEVICE_ATTR(in0_max, S_IRUGO|S_IWUSR, 659 show_in_max, set_in_max, 0); 660 static SENSOR_DEVICE_ATTR(in0_min, S_IRUGO|S_IWUSR, 661 show_in_min, set_in_min, 0); 662 static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1); 663 static SENSOR_DEVICE_ATTR(in1_max, S_IRUGO|S_IWUSR, 664 show_in_max, set_in_max, 1); 665 static SENSOR_DEVICE_ATTR(in1_min, S_IRUGO|S_IWUSR, 666 show_in_min, set_in_min, 1); 667 static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 2); 668 static SENSOR_DEVICE_ATTR(in2_max, S_IRUGO|S_IWUSR, 669 show_in_max, set_in_max, 2); 670 static SENSOR_DEVICE_ATTR(in2_min, S_IRUGO|S_IWUSR, 671 show_in_min, set_in_min, 2); 672 static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 3); 673 static SENSOR_DEVICE_ATTR(in3_max, S_IRUGO|S_IWUSR, 674 show_in_max, set_in_max, 3); 675 static SENSOR_DEVICE_ATTR(in3_min, S_IRUGO|S_IWUSR, 676 show_in_min, set_in_min, 3); 677 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp11, NULL, 0); 678 static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO|S_IWUSR, 679 show_temp_max_hyst, set_temp_max_hyst, 0); 680 static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO|S_IWUSR, 681 show_temp_max, set_temp_max, 0); 682 static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp11, NULL, 1); 683 static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IRUGO|S_IWUSR, 684 show_temp_max_hyst, set_temp_max_hyst, 1); 685 static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO|S_IWUSR, 686 show_temp_max, set_temp_max, 1); 687 static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0); 688 static SENSOR_DEVICE_ATTR(fan1_max, S_IRUGO, show_fan_max, NULL, 0); 689 static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO|S_IWUSR, 690 show_fan_min, set_fan_min, 0); 691 static SENSOR_DEVICE_ATTR(fan1_target, S_IRUGO|S_IWUSR, 692 show_fan_target, set_fan_target, 0); 693 static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1); 694 static SENSOR_DEVICE_ATTR(fan2_max, S_IRUGO, show_fan_max, NULL, 1); 695 static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO|S_IWUSR, 696 show_fan_min, set_fan_min, 1); 697 static SENSOR_DEVICE_ATTR(fan2_target, S_IRUGO|S_IWUSR, 698 show_fan_target, set_fan_target, 1); 699 static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO|S_IWUSR, 700 show_pwm, set_pwm, 0); 701 static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR, 702 show_pwm_enable, set_pwm_enable, 0); 703 static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO, 704 show_pwm_mode, set_pwm_mode, 0); 705 static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR, 706 show_pwm, set_pwm, 1); 707 static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO|S_IWUSR, 708 show_pwm_enable, set_pwm_enable, 1); 709 static SENSOR_DEVICE_ATTR(pwm2_mode, S_IRUGO, 710 show_pwm_mode, set_pwm_mode, 1); 711 712 static struct attribute *f75375_attributes[] = { 713 &sensor_dev_attr_temp1_input.dev_attr.attr, 714 &sensor_dev_attr_temp1_max.dev_attr.attr, 715 &sensor_dev_attr_temp1_max_hyst.dev_attr.attr, 716 &sensor_dev_attr_temp2_input.dev_attr.attr, 717 &sensor_dev_attr_temp2_max.dev_attr.attr, 718 &sensor_dev_attr_temp2_max_hyst.dev_attr.attr, 719 &sensor_dev_attr_fan1_input.dev_attr.attr, 720 &sensor_dev_attr_fan1_max.dev_attr.attr, 721 &sensor_dev_attr_fan1_min.dev_attr.attr, 722 &sensor_dev_attr_fan1_target.dev_attr.attr, 723 &sensor_dev_attr_fan2_input.dev_attr.attr, 724 &sensor_dev_attr_fan2_max.dev_attr.attr, 725 &sensor_dev_attr_fan2_min.dev_attr.attr, 726 &sensor_dev_attr_fan2_target.dev_attr.attr, 727 &sensor_dev_attr_pwm1.dev_attr.attr, 728 &sensor_dev_attr_pwm1_enable.dev_attr.attr, 729 &sensor_dev_attr_pwm1_mode.dev_attr.attr, 730 &sensor_dev_attr_pwm2.dev_attr.attr, 731 &sensor_dev_attr_pwm2_enable.dev_attr.attr, 732 &sensor_dev_attr_pwm2_mode.dev_attr.attr, 733 &sensor_dev_attr_in0_input.dev_attr.attr, 734 &sensor_dev_attr_in0_max.dev_attr.attr, 735 &sensor_dev_attr_in0_min.dev_attr.attr, 736 &sensor_dev_attr_in1_input.dev_attr.attr, 737 &sensor_dev_attr_in1_max.dev_attr.attr, 738 &sensor_dev_attr_in1_min.dev_attr.attr, 739 &sensor_dev_attr_in2_input.dev_attr.attr, 740 &sensor_dev_attr_in2_max.dev_attr.attr, 741 &sensor_dev_attr_in2_min.dev_attr.attr, 742 &sensor_dev_attr_in3_input.dev_attr.attr, 743 &sensor_dev_attr_in3_max.dev_attr.attr, 744 &sensor_dev_attr_in3_min.dev_attr.attr, 745 NULL 746 }; 747 748 static const struct attribute_group f75375_group = { 749 .attrs = f75375_attributes, 750 }; 751 752 static void f75375_init(struct i2c_client *client, struct f75375_data *data, 753 struct f75375s_platform_data *f75375s_pdata) 754 { 755 int nr; 756 757 if (!f75375s_pdata) { 758 u8 conf, mode; 759 int nr; 760 761 conf = f75375_read8(client, F75375_REG_CONFIG1); 762 mode = f75375_read8(client, F75375_REG_FAN_TIMER); 763 for (nr = 0; nr < 2; nr++) { 764 if (data->kind == f75387) { 765 bool manu, duty; 766 767 if (!(mode & (1 << F75387_FAN_CTRL_LINEAR(nr)))) 768 data->pwm_mode[nr] = 1; 769 770 manu = ((mode >> F75387_FAN_MANU_MODE(nr)) & 1); 771 duty = ((mode >> F75387_FAN_DUTY_MODE(nr)) & 1); 772 if (!manu && duty) 773 /* auto, pwm */ 774 data->pwm_enable[nr] = 4; 775 else if (manu && !duty) 776 /* manual, speed */ 777 data->pwm_enable[nr] = 3; 778 else if (!manu && !duty) 779 /* automatic, speed */ 780 data->pwm_enable[nr] = 2; 781 else 782 /* manual, pwm */ 783 data->pwm_enable[nr] = 1; 784 } else { 785 if (!(conf & (1 << F75375_FAN_CTRL_LINEAR(nr)))) 786 data->pwm_mode[nr] = 1; 787 788 switch ((mode >> FAN_CTRL_MODE(nr)) & 3) { 789 case 0: /* speed */ 790 data->pwm_enable[nr] = 3; 791 break; 792 case 1: /* automatic */ 793 data->pwm_enable[nr] = 2; 794 break; 795 default: /* manual */ 796 data->pwm_enable[nr] = 1; 797 break; 798 } 799 } 800 } 801 return; 802 } 803 804 set_pwm_enable_direct(client, 0, f75375s_pdata->pwm_enable[0]); 805 set_pwm_enable_direct(client, 1, f75375s_pdata->pwm_enable[1]); 806 for (nr = 0; nr < 2; nr++) { 807 if (auto_mode_enabled(f75375s_pdata->pwm_enable[nr]) || 808 !duty_mode_enabled(f75375s_pdata->pwm_enable[nr])) 809 continue; 810 data->pwm[nr] = clamp_val(f75375s_pdata->pwm[nr], 0, 255); 811 f75375_write_pwm(client, nr); 812 } 813 814 } 815 816 static int f75375_probe(struct i2c_client *client) 817 { 818 struct f75375_data *data; 819 struct f75375s_platform_data *f75375s_pdata = 820 dev_get_platdata(&client->dev); 821 int err; 822 823 if (!i2c_check_functionality(client->adapter, 824 I2C_FUNC_SMBUS_BYTE_DATA)) 825 return -EIO; 826 data = devm_kzalloc(&client->dev, sizeof(struct f75375_data), 827 GFP_KERNEL); 828 if (!data) 829 return -ENOMEM; 830 831 i2c_set_clientdata(client, data); 832 mutex_init(&data->update_lock); 833 data->kind = i2c_match_id(f75375_id, client)->driver_data; 834 835 err = sysfs_create_group(&client->dev.kobj, &f75375_group); 836 if (err) 837 return err; 838 839 if (data->kind != f75373) { 840 err = sysfs_chmod_file(&client->dev.kobj, 841 &sensor_dev_attr_pwm1_mode.dev_attr.attr, 842 S_IRUGO | S_IWUSR); 843 if (err) 844 goto exit_remove; 845 err = sysfs_chmod_file(&client->dev.kobj, 846 &sensor_dev_attr_pwm2_mode.dev_attr.attr, 847 S_IRUGO | S_IWUSR); 848 if (err) 849 goto exit_remove; 850 } 851 852 data->hwmon_dev = hwmon_device_register(&client->dev); 853 if (IS_ERR(data->hwmon_dev)) { 854 err = PTR_ERR(data->hwmon_dev); 855 goto exit_remove; 856 } 857 858 f75375_init(client, data, f75375s_pdata); 859 860 return 0; 861 862 exit_remove: 863 sysfs_remove_group(&client->dev.kobj, &f75375_group); 864 return err; 865 } 866 867 static void f75375_remove(struct i2c_client *client) 868 { 869 struct f75375_data *data = i2c_get_clientdata(client); 870 hwmon_device_unregister(data->hwmon_dev); 871 sysfs_remove_group(&client->dev.kobj, &f75375_group); 872 } 873 874 /* Return 0 if detection is successful, -ENODEV otherwise */ 875 static int f75375_detect(struct i2c_client *client, 876 struct i2c_board_info *info) 877 { 878 struct i2c_adapter *adapter = client->adapter; 879 u16 vendid, chipid; 880 u8 version; 881 const char *name; 882 883 vendid = f75375_read16(client, F75375_REG_VENDOR); 884 chipid = f75375_read16(client, F75375_CHIP_ID); 885 if (vendid != 0x1934) 886 return -ENODEV; 887 888 if (chipid == 0x0306) 889 name = "f75375"; 890 else if (chipid == 0x0204) 891 name = "f75373"; 892 else if (chipid == 0x0410) 893 name = "f75387"; 894 else 895 return -ENODEV; 896 897 version = f75375_read8(client, F75375_REG_VERSION); 898 dev_info(&adapter->dev, "found %s version: %02X\n", name, version); 899 strscpy(info->type, name, I2C_NAME_SIZE); 900 901 return 0; 902 } 903 904 module_i2c_driver(f75375_driver); 905 906 MODULE_AUTHOR("Riku Voipio"); 907 MODULE_LICENSE("GPL"); 908 MODULE_DESCRIPTION("F75373/F75375/F75387 hardware monitoring driver"); 909