1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * adm1029.c - Part of lm_sensors, Linux kernel modules for hardware monitoring 4 * 5 * Copyright (C) 2006 Corentin LABBE <clabbe.montjoie@gmail.com> 6 * 7 * Based on LM83 Driver by Jean Delvare <jdelvare@suse.de> 8 * 9 * Give only processor, motherboard temperatures and fan tachs 10 * Very rare chip please let me know if you use it 11 * 12 * http://www.analog.com/UploadedFiles/Data_Sheets/ADM1029.pdf 13 * 14 * 15 * This program is free software; you can redistribute it and/or modify 16 * it under the terms of the GNU General Public License as published by 17 * the Free Software Foundation version 2 of the License 18 * 19 * This program is distributed in the hope that it will be useful, 20 * but WITHOUT ANY WARRANTY; without even the implied warranty of 21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 22 * GNU General Public License for more details. 23 */ 24 25 #include <linux/module.h> 26 #include <linux/init.h> 27 #include <linux/slab.h> 28 #include <linux/jiffies.h> 29 #include <linux/i2c.h> 30 #include <linux/hwmon-sysfs.h> 31 #include <linux/hwmon.h> 32 #include <linux/err.h> 33 #include <linux/mutex.h> 34 35 /* 36 * Addresses to scan 37 */ 38 39 static const unsigned short normal_i2c[] = { 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 40 0x2e, 0x2f, I2C_CLIENT_END 41 }; 42 43 /* 44 * The ADM1029 registers 45 * Manufacturer ID is 0x41 for Analog Devices 46 */ 47 48 #define ADM1029_REG_MAN_ID 0x0D 49 #define ADM1029_REG_CHIP_ID 0x0E 50 #define ADM1029_REG_CONFIG 0x01 51 #define ADM1029_REG_NB_FAN_SUPPORT 0x02 52 53 #define ADM1029_REG_TEMP_DEVICES_INSTALLED 0x06 54 55 #define ADM1029_REG_LOCAL_TEMP 0xA0 56 #define ADM1029_REG_REMOTE1_TEMP 0xA1 57 #define ADM1029_REG_REMOTE2_TEMP 0xA2 58 59 #define ADM1029_REG_LOCAL_TEMP_HIGH 0x90 60 #define ADM1029_REG_REMOTE1_TEMP_HIGH 0x91 61 #define ADM1029_REG_REMOTE2_TEMP_HIGH 0x92 62 63 #define ADM1029_REG_LOCAL_TEMP_LOW 0x98 64 #define ADM1029_REG_REMOTE1_TEMP_LOW 0x99 65 #define ADM1029_REG_REMOTE2_TEMP_LOW 0x9A 66 67 #define ADM1029_REG_FAN1 0x70 68 #define ADM1029_REG_FAN2 0x71 69 70 #define ADM1029_REG_FAN1_MIN 0x78 71 #define ADM1029_REG_FAN2_MIN 0x79 72 73 #define ADM1029_REG_FAN1_CONFIG 0x68 74 #define ADM1029_REG_FAN2_CONFIG 0x69 75 76 #define TEMP_FROM_REG(val) ((val) * 1000) 77 78 #define DIV_FROM_REG(val) (1 << (((val) >> 6) - 1)) 79 80 /* Registers to be checked by adm1029_update_device() */ 81 static const u8 ADM1029_REG_TEMP[] = { 82 ADM1029_REG_LOCAL_TEMP, 83 ADM1029_REG_REMOTE1_TEMP, 84 ADM1029_REG_REMOTE2_TEMP, 85 ADM1029_REG_LOCAL_TEMP_HIGH, 86 ADM1029_REG_REMOTE1_TEMP_HIGH, 87 ADM1029_REG_REMOTE2_TEMP_HIGH, 88 ADM1029_REG_LOCAL_TEMP_LOW, 89 ADM1029_REG_REMOTE1_TEMP_LOW, 90 ADM1029_REG_REMOTE2_TEMP_LOW, 91 }; 92 93 static const u8 ADM1029_REG_FAN[] = { 94 ADM1029_REG_FAN1, 95 ADM1029_REG_FAN2, 96 ADM1029_REG_FAN1_MIN, 97 ADM1029_REG_FAN2_MIN, 98 }; 99 100 static const u8 ADM1029_REG_FAN_DIV[] = { 101 ADM1029_REG_FAN1_CONFIG, 102 ADM1029_REG_FAN2_CONFIG, 103 }; 104 105 /* 106 * Client data (each client gets its own) 107 */ 108 109 struct adm1029_data { 110 struct i2c_client *client; 111 struct mutex update_lock; 112 char valid; /* zero until following fields are valid */ 113 unsigned long last_updated; /* in jiffies */ 114 115 /* registers values, signed for temperature, unsigned for other stuff */ 116 s8 temp[ARRAY_SIZE(ADM1029_REG_TEMP)]; 117 u8 fan[ARRAY_SIZE(ADM1029_REG_FAN)]; 118 u8 fan_div[ARRAY_SIZE(ADM1029_REG_FAN_DIV)]; 119 }; 120 121 /* 122 * function that update the status of the chips (temperature for example) 123 */ 124 static struct adm1029_data *adm1029_update_device(struct device *dev) 125 { 126 struct adm1029_data *data = dev_get_drvdata(dev); 127 struct i2c_client *client = data->client; 128 129 mutex_lock(&data->update_lock); 130 /* 131 * Use the "cache" Luke, don't recheck values 132 * if there are already checked not a long time later 133 */ 134 if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) { 135 int nr; 136 137 dev_dbg(&client->dev, "Updating adm1029 data\n"); 138 139 for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_TEMP); nr++) { 140 data->temp[nr] = 141 i2c_smbus_read_byte_data(client, 142 ADM1029_REG_TEMP[nr]); 143 } 144 for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN); nr++) { 145 data->fan[nr] = 146 i2c_smbus_read_byte_data(client, 147 ADM1029_REG_FAN[nr]); 148 } 149 for (nr = 0; nr < ARRAY_SIZE(ADM1029_REG_FAN_DIV); nr++) { 150 data->fan_div[nr] = 151 i2c_smbus_read_byte_data(client, 152 ADM1029_REG_FAN_DIV[nr]); 153 } 154 155 data->last_updated = jiffies; 156 data->valid = 1; 157 } 158 159 mutex_unlock(&data->update_lock); 160 161 return data; 162 } 163 164 /* 165 * Sysfs stuff 166 */ 167 168 static ssize_t 169 show_temp(struct device *dev, struct device_attribute *devattr, char *buf) 170 { 171 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 172 struct adm1029_data *data = adm1029_update_device(dev); 173 174 return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[attr->index])); 175 } 176 177 static ssize_t 178 show_fan(struct device *dev, struct device_attribute *devattr, char *buf) 179 { 180 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 181 struct adm1029_data *data = adm1029_update_device(dev); 182 u16 val; 183 184 if (data->fan[attr->index] == 0 || 185 (data->fan_div[attr->index] & 0xC0) == 0 || 186 data->fan[attr->index] == 255) { 187 return sprintf(buf, "0\n"); 188 } 189 190 val = 1880 * 120 / DIV_FROM_REG(data->fan_div[attr->index]) 191 / data->fan[attr->index]; 192 return sprintf(buf, "%d\n", val); 193 } 194 195 static ssize_t 196 show_fan_div(struct device *dev, struct device_attribute *devattr, char *buf) 197 { 198 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 199 struct adm1029_data *data = adm1029_update_device(dev); 200 201 if ((data->fan_div[attr->index] & 0xC0) == 0) 202 return sprintf(buf, "0\n"); 203 return sprintf(buf, "%d\n", DIV_FROM_REG(data->fan_div[attr->index])); 204 } 205 206 static ssize_t set_fan_div(struct device *dev, 207 struct device_attribute *devattr, const char *buf, size_t count) 208 { 209 struct adm1029_data *data = dev_get_drvdata(dev); 210 struct i2c_client *client = data->client; 211 struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); 212 u8 reg; 213 long val; 214 int ret = kstrtol(buf, 10, &val); 215 216 if (ret < 0) 217 return ret; 218 219 mutex_lock(&data->update_lock); 220 221 /*Read actual config */ 222 reg = i2c_smbus_read_byte_data(client, 223 ADM1029_REG_FAN_DIV[attr->index]); 224 225 switch (val) { 226 case 1: 227 val = 1; 228 break; 229 case 2: 230 val = 2; 231 break; 232 case 4: 233 val = 3; 234 break; 235 default: 236 mutex_unlock(&data->update_lock); 237 dev_err(&client->dev, 238 "fan_div value %ld not supported. Choose one of 1, 2 or 4!\n", 239 val); 240 return -EINVAL; 241 } 242 /* Update the value */ 243 reg = (reg & 0x3F) | (val << 6); 244 245 /* Update the cache */ 246 data->fan_div[attr->index] = reg; 247 248 /* Write value */ 249 i2c_smbus_write_byte_data(client, 250 ADM1029_REG_FAN_DIV[attr->index], reg); 251 mutex_unlock(&data->update_lock); 252 253 return count; 254 } 255 256 /* Access rights on sysfs. */ 257 static SENSOR_DEVICE_ATTR(temp1_input, 0444, show_temp, NULL, 0); 258 static SENSOR_DEVICE_ATTR(temp2_input, 0444, show_temp, NULL, 1); 259 static SENSOR_DEVICE_ATTR(temp3_input, 0444, show_temp, NULL, 2); 260 261 static SENSOR_DEVICE_ATTR(temp1_max, 0444, show_temp, NULL, 3); 262 static SENSOR_DEVICE_ATTR(temp2_max, 0444, show_temp, NULL, 4); 263 static SENSOR_DEVICE_ATTR(temp3_max, 0444, show_temp, NULL, 5); 264 265 static SENSOR_DEVICE_ATTR(temp1_min, 0444, show_temp, NULL, 6); 266 static SENSOR_DEVICE_ATTR(temp2_min, 0444, show_temp, NULL, 7); 267 static SENSOR_DEVICE_ATTR(temp3_min, 0444, show_temp, NULL, 8); 268 269 static SENSOR_DEVICE_ATTR(fan1_input, 0444, show_fan, NULL, 0); 270 static SENSOR_DEVICE_ATTR(fan2_input, 0444, show_fan, NULL, 1); 271 272 static SENSOR_DEVICE_ATTR(fan1_min, 0444, show_fan, NULL, 2); 273 static SENSOR_DEVICE_ATTR(fan2_min, 0444, show_fan, NULL, 3); 274 275 static SENSOR_DEVICE_ATTR(fan1_div, 0644, show_fan_div, set_fan_div, 0); 276 static SENSOR_DEVICE_ATTR(fan2_div, 0644, show_fan_div, set_fan_div, 1); 277 278 static struct attribute *adm1029_attrs[] = { 279 &sensor_dev_attr_temp1_input.dev_attr.attr, 280 &sensor_dev_attr_temp1_min.dev_attr.attr, 281 &sensor_dev_attr_temp1_max.dev_attr.attr, 282 &sensor_dev_attr_temp2_input.dev_attr.attr, 283 &sensor_dev_attr_temp2_min.dev_attr.attr, 284 &sensor_dev_attr_temp2_max.dev_attr.attr, 285 &sensor_dev_attr_temp3_input.dev_attr.attr, 286 &sensor_dev_attr_temp3_min.dev_attr.attr, 287 &sensor_dev_attr_temp3_max.dev_attr.attr, 288 &sensor_dev_attr_fan1_input.dev_attr.attr, 289 &sensor_dev_attr_fan2_input.dev_attr.attr, 290 &sensor_dev_attr_fan1_min.dev_attr.attr, 291 &sensor_dev_attr_fan2_min.dev_attr.attr, 292 &sensor_dev_attr_fan1_div.dev_attr.attr, 293 &sensor_dev_attr_fan2_div.dev_attr.attr, 294 NULL 295 }; 296 297 ATTRIBUTE_GROUPS(adm1029); 298 299 /* 300 * Real code 301 */ 302 303 /* Return 0 if detection is successful, -ENODEV otherwise */ 304 static int adm1029_detect(struct i2c_client *client, 305 struct i2c_board_info *info) 306 { 307 struct i2c_adapter *adapter = client->adapter; 308 u8 man_id, chip_id, temp_devices_installed, nb_fan_support; 309 310 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) 311 return -ENODEV; 312 313 /* 314 * ADM1029 doesn't have CHIP ID, check just MAN ID 315 * For better detection we check also ADM1029_TEMP_DEVICES_INSTALLED, 316 * ADM1029_REG_NB_FAN_SUPPORT and compare it with possible values 317 * documented 318 */ 319 320 man_id = i2c_smbus_read_byte_data(client, ADM1029_REG_MAN_ID); 321 chip_id = i2c_smbus_read_byte_data(client, ADM1029_REG_CHIP_ID); 322 temp_devices_installed = i2c_smbus_read_byte_data(client, 323 ADM1029_REG_TEMP_DEVICES_INSTALLED); 324 nb_fan_support = i2c_smbus_read_byte_data(client, 325 ADM1029_REG_NB_FAN_SUPPORT); 326 /* 0x41 is Analog Devices */ 327 if (man_id != 0x41 || (temp_devices_installed & 0xf9) != 0x01 || 328 nb_fan_support != 0x03) 329 return -ENODEV; 330 331 if ((chip_id & 0xF0) != 0x00) { 332 /* 333 * There are no "official" CHIP ID, so actually 334 * we use Major/Minor revision for that 335 */ 336 pr_info("Unknown major revision %x, please let us know\n", 337 chip_id); 338 return -ENODEV; 339 } 340 341 strlcpy(info->type, "adm1029", I2C_NAME_SIZE); 342 343 return 0; 344 } 345 346 static int adm1029_init_client(struct i2c_client *client) 347 { 348 u8 config; 349 350 config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG); 351 if ((config & 0x10) == 0) { 352 i2c_smbus_write_byte_data(client, ADM1029_REG_CONFIG, 353 config | 0x10); 354 } 355 /* recheck config */ 356 config = i2c_smbus_read_byte_data(client, ADM1029_REG_CONFIG); 357 if ((config & 0x10) == 0) { 358 dev_err(&client->dev, "Initialization failed!\n"); 359 return 0; 360 } 361 return 1; 362 } 363 364 static int adm1029_probe(struct i2c_client *client, 365 const struct i2c_device_id *id) 366 { 367 struct device *dev = &client->dev; 368 struct adm1029_data *data; 369 struct device *hwmon_dev; 370 371 data = devm_kzalloc(dev, sizeof(struct adm1029_data), GFP_KERNEL); 372 if (!data) 373 return -ENOMEM; 374 375 data->client = client; 376 mutex_init(&data->update_lock); 377 378 /* 379 * Initialize the ADM1029 chip 380 * Check config register 381 */ 382 if (adm1029_init_client(client) == 0) 383 return -ENODEV; 384 385 hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, 386 data, 387 adm1029_groups); 388 return PTR_ERR_OR_ZERO(hwmon_dev); 389 } 390 391 static const struct i2c_device_id adm1029_id[] = { 392 { "adm1029", 0 }, 393 { } 394 }; 395 MODULE_DEVICE_TABLE(i2c, adm1029_id); 396 397 static struct i2c_driver adm1029_driver = { 398 .class = I2C_CLASS_HWMON, 399 .driver = { 400 .name = "adm1029", 401 }, 402 .probe = adm1029_probe, 403 .id_table = adm1029_id, 404 .detect = adm1029_detect, 405 .address_list = normal_i2c, 406 }; 407 408 module_i2c_driver(adm1029_driver); 409 410 MODULE_AUTHOR("Corentin LABBE <clabbe.montjoie@gmail.com>"); 411 MODULE_DESCRIPTION("adm1029 driver"); 412 MODULE_LICENSE("GPL v2"); 413