1 /* 2 * adm1021.c - Part of lm_sensors, Linux kernel modules for hardware 3 * monitoring 4 * Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and 5 * Philip Edelbrock <phil@netroedge.com> 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 20 */ 21 22 #include <linux/module.h> 23 #include <linux/init.h> 24 #include <linux/slab.h> 25 #include <linux/jiffies.h> 26 #include <linux/i2c.h> 27 #include <linux/hwmon.h> 28 #include <linux/hwmon-sysfs.h> 29 #include <linux/err.h> 30 #include <linux/mutex.h> 31 32 33 /* Addresses to scan */ 34 static const unsigned short normal_i2c[] = { 35 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; 36 37 enum chips { 38 adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm, mc1066 }; 39 40 /* adm1021 constants specified below */ 41 42 /* The adm1021 registers */ 43 /* Read-only */ 44 /* For nr in 0-1 */ 45 #define ADM1021_REG_TEMP(nr) (nr) 46 #define ADM1021_REG_STATUS 0x02 47 /* 0x41 = AD, 0x49 = TI, 0x4D = Maxim, 0x23 = Genesys , 0x54 = Onsemi */ 48 #define ADM1021_REG_MAN_ID 0xFE 49 /* ADM1021 = 0x0X, ADM1023 = 0x3X */ 50 #define ADM1021_REG_DEV_ID 0xFF 51 /* These use different addresses for reading/writing */ 52 #define ADM1021_REG_CONFIG_R 0x03 53 #define ADM1021_REG_CONFIG_W 0x09 54 #define ADM1021_REG_CONV_RATE_R 0x04 55 #define ADM1021_REG_CONV_RATE_W 0x0A 56 /* These are for the ADM1023's additional precision on the remote temp sensor */ 57 #define ADM1023_REG_REM_TEMP_PREC 0x10 58 #define ADM1023_REG_REM_OFFSET 0x11 59 #define ADM1023_REG_REM_OFFSET_PREC 0x12 60 #define ADM1023_REG_REM_TOS_PREC 0x13 61 #define ADM1023_REG_REM_THYST_PREC 0x14 62 /* limits */ 63 /* For nr in 0-1 */ 64 #define ADM1021_REG_TOS_R(nr) (0x05 + 2 * (nr)) 65 #define ADM1021_REG_TOS_W(nr) (0x0B + 2 * (nr)) 66 #define ADM1021_REG_THYST_R(nr) (0x06 + 2 * (nr)) 67 #define ADM1021_REG_THYST_W(nr) (0x0C + 2 * (nr)) 68 /* write-only */ 69 #define ADM1021_REG_ONESHOT 0x0F 70 71 /* Initial values */ 72 73 /* 74 * Note: Even though I left the low and high limits named os and hyst, 75 * they don't quite work like a thermostat the way the LM75 does. I.e., 76 * a lower temp than THYST actually triggers an alarm instead of 77 * clearing it. Weird, ey? --Phil 78 */ 79 80 /* Each client has this additional data */ 81 struct adm1021_data { 82 struct device *hwmon_dev; 83 enum chips type; 84 85 struct mutex update_lock; 86 char valid; /* !=0 if following fields are valid */ 87 char low_power; /* !=0 if device in low power mode */ 88 unsigned long last_updated; /* In jiffies */ 89 90 int temp_max[2]; /* Register values */ 91 int temp_min[2]; 92 int temp[2]; 93 u8 alarms; 94 /* Special values for ADM1023 only */ 95 u8 remote_temp_offset; 96 u8 remote_temp_offset_prec; 97 }; 98 99 static int adm1021_probe(struct i2c_client *client, 100 const struct i2c_device_id *id); 101 static int adm1021_detect(struct i2c_client *client, 102 struct i2c_board_info *info); 103 static void adm1021_init_client(struct i2c_client *client); 104 static int adm1021_remove(struct i2c_client *client); 105 static struct adm1021_data *adm1021_update_device(struct device *dev); 106 107 /* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */ 108 static bool read_only; 109 110 111 static const struct i2c_device_id adm1021_id[] = { 112 { "adm1021", adm1021 }, 113 { "adm1023", adm1023 }, 114 { "max1617", max1617 }, 115 { "max1617a", max1617a }, 116 { "thmc10", thmc10 }, 117 { "lm84", lm84 }, 118 { "gl523sm", gl523sm }, 119 { "mc1066", mc1066 }, 120 { } 121 }; 122 MODULE_DEVICE_TABLE(i2c, adm1021_id); 123 124 /* This is the driver that will be inserted */ 125 static struct i2c_driver adm1021_driver = { 126 .class = I2C_CLASS_HWMON, 127 .driver = { 128 .name = "adm1021", 129 }, 130 .probe = adm1021_probe, 131 .remove = adm1021_remove, 132 .id_table = adm1021_id, 133 .detect = adm1021_detect, 134 .address_list = normal_i2c, 135 }; 136 137 static ssize_t show_temp(struct device *dev, 138 struct device_attribute *devattr, char *buf) 139 { 140 int index = to_sensor_dev_attr(devattr)->index; 141 struct adm1021_data *data = adm1021_update_device(dev); 142 143 return sprintf(buf, "%d\n", data->temp[index]); 144 } 145 146 static ssize_t show_temp_max(struct device *dev, 147 struct device_attribute *devattr, char *buf) 148 { 149 int index = to_sensor_dev_attr(devattr)->index; 150 struct adm1021_data *data = adm1021_update_device(dev); 151 152 return sprintf(buf, "%d\n", data->temp_max[index]); 153 } 154 155 static ssize_t show_temp_min(struct device *dev, 156 struct device_attribute *devattr, char *buf) 157 { 158 int index = to_sensor_dev_attr(devattr)->index; 159 struct adm1021_data *data = adm1021_update_device(dev); 160 161 return sprintf(buf, "%d\n", data->temp_min[index]); 162 } 163 164 static ssize_t show_alarm(struct device *dev, struct device_attribute *attr, 165 char *buf) 166 { 167 int index = to_sensor_dev_attr(attr)->index; 168 struct adm1021_data *data = adm1021_update_device(dev); 169 return sprintf(buf, "%u\n", (data->alarms >> index) & 1); 170 } 171 172 static ssize_t show_alarms(struct device *dev, 173 struct device_attribute *attr, 174 char *buf) 175 { 176 struct adm1021_data *data = adm1021_update_device(dev); 177 return sprintf(buf, "%u\n", data->alarms); 178 } 179 180 static ssize_t set_temp_max(struct device *dev, 181 struct device_attribute *devattr, 182 const char *buf, size_t count) 183 { 184 int index = to_sensor_dev_attr(devattr)->index; 185 struct i2c_client *client = to_i2c_client(dev); 186 struct adm1021_data *data = i2c_get_clientdata(client); 187 long temp; 188 int err; 189 190 err = kstrtol(buf, 10, &temp); 191 if (err) 192 return err; 193 temp /= 1000; 194 195 mutex_lock(&data->update_lock); 196 data->temp_max[index] = SENSORS_LIMIT(temp, -128, 127); 197 if (!read_only) 198 i2c_smbus_write_byte_data(client, ADM1021_REG_TOS_W(index), 199 data->temp_max[index]); 200 mutex_unlock(&data->update_lock); 201 202 return count; 203 } 204 205 static ssize_t set_temp_min(struct device *dev, 206 struct device_attribute *devattr, 207 const char *buf, size_t count) 208 { 209 int index = to_sensor_dev_attr(devattr)->index; 210 struct i2c_client *client = to_i2c_client(dev); 211 struct adm1021_data *data = i2c_get_clientdata(client); 212 long temp; 213 int err; 214 215 err = kstrtol(buf, 10, &temp); 216 if (err) 217 return err; 218 temp /= 1000; 219 220 mutex_lock(&data->update_lock); 221 data->temp_min[index] = SENSORS_LIMIT(temp, -128, 127); 222 if (!read_only) 223 i2c_smbus_write_byte_data(client, ADM1021_REG_THYST_W(index), 224 data->temp_min[index]); 225 mutex_unlock(&data->update_lock); 226 227 return count; 228 } 229 230 static ssize_t show_low_power(struct device *dev, 231 struct device_attribute *devattr, char *buf) 232 { 233 struct adm1021_data *data = adm1021_update_device(dev); 234 return sprintf(buf, "%d\n", data->low_power); 235 } 236 237 static ssize_t set_low_power(struct device *dev, 238 struct device_attribute *devattr, 239 const char *buf, size_t count) 240 { 241 struct i2c_client *client = to_i2c_client(dev); 242 struct adm1021_data *data = i2c_get_clientdata(client); 243 char low_power; 244 unsigned long val; 245 int err; 246 247 err = kstrtoul(buf, 10, &val); 248 if (err) 249 return err; 250 low_power = val != 0; 251 252 mutex_lock(&data->update_lock); 253 if (low_power != data->low_power) { 254 int config = i2c_smbus_read_byte_data( 255 client, ADM1021_REG_CONFIG_R); 256 data->low_power = low_power; 257 i2c_smbus_write_byte_data(client, ADM1021_REG_CONFIG_W, 258 (config & 0xBF) | (low_power << 6)); 259 } 260 mutex_unlock(&data->update_lock); 261 262 return count; 263 } 264 265 266 static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0); 267 static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, 268 set_temp_max, 0); 269 static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min, 270 set_temp_min, 0); 271 static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1); 272 static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max, 273 set_temp_max, 1); 274 static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min, 275 set_temp_min, 1); 276 static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, show_alarm, NULL, 6); 277 static SENSOR_DEVICE_ATTR(temp1_min_alarm, S_IRUGO, show_alarm, NULL, 5); 278 static SENSOR_DEVICE_ATTR(temp2_max_alarm, S_IRUGO, show_alarm, NULL, 4); 279 static SENSOR_DEVICE_ATTR(temp2_min_alarm, S_IRUGO, show_alarm, NULL, 3); 280 static SENSOR_DEVICE_ATTR(temp2_fault, S_IRUGO, show_alarm, NULL, 2); 281 282 static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); 283 static DEVICE_ATTR(low_power, S_IWUSR | S_IRUGO, show_low_power, set_low_power); 284 285 static struct attribute *adm1021_attributes[] = { 286 &sensor_dev_attr_temp1_max.dev_attr.attr, 287 &sensor_dev_attr_temp1_min.dev_attr.attr, 288 &sensor_dev_attr_temp1_input.dev_attr.attr, 289 &sensor_dev_attr_temp2_max.dev_attr.attr, 290 &sensor_dev_attr_temp2_min.dev_attr.attr, 291 &sensor_dev_attr_temp2_input.dev_attr.attr, 292 &sensor_dev_attr_temp1_max_alarm.dev_attr.attr, 293 &sensor_dev_attr_temp1_min_alarm.dev_attr.attr, 294 &sensor_dev_attr_temp2_max_alarm.dev_attr.attr, 295 &sensor_dev_attr_temp2_min_alarm.dev_attr.attr, 296 &sensor_dev_attr_temp2_fault.dev_attr.attr, 297 &dev_attr_alarms.attr, 298 &dev_attr_low_power.attr, 299 NULL 300 }; 301 302 static const struct attribute_group adm1021_group = { 303 .attrs = adm1021_attributes, 304 }; 305 306 /* Return 0 if detection is successful, -ENODEV otherwise */ 307 static int adm1021_detect(struct i2c_client *client, 308 struct i2c_board_info *info) 309 { 310 struct i2c_adapter *adapter = client->adapter; 311 const char *type_name; 312 int conv_rate, status, config, man_id, dev_id; 313 314 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) { 315 pr_debug("adm1021: detect failed, " 316 "smbus byte data not supported!\n"); 317 return -ENODEV; 318 } 319 320 status = i2c_smbus_read_byte_data(client, ADM1021_REG_STATUS); 321 conv_rate = i2c_smbus_read_byte_data(client, 322 ADM1021_REG_CONV_RATE_R); 323 config = i2c_smbus_read_byte_data(client, ADM1021_REG_CONFIG_R); 324 325 /* Check unused bits */ 326 if ((status & 0x03) || (config & 0x3F) || (conv_rate & 0xF8)) { 327 pr_debug("adm1021: detect failed, chip not detected!\n"); 328 return -ENODEV; 329 } 330 331 /* Determine the chip type. */ 332 man_id = i2c_smbus_read_byte_data(client, ADM1021_REG_MAN_ID); 333 dev_id = i2c_smbus_read_byte_data(client, ADM1021_REG_DEV_ID); 334 335 if (man_id == 0x4d && dev_id == 0x01) 336 type_name = "max1617a"; 337 else if (man_id == 0x41) { 338 if ((dev_id & 0xF0) == 0x30) 339 type_name = "adm1023"; 340 else 341 type_name = "adm1021"; 342 } else if (man_id == 0x49) 343 type_name = "thmc10"; 344 else if (man_id == 0x23) 345 type_name = "gl523sm"; 346 else if (man_id == 0x54) 347 type_name = "mc1066"; 348 /* LM84 Mfr ID in a different place, and it has more unused bits */ 349 else if (conv_rate == 0x00 350 && (config & 0x7F) == 0x00 351 && (status & 0xAB) == 0x00) 352 type_name = "lm84"; 353 else 354 type_name = "max1617"; 355 356 pr_debug("adm1021: Detected chip %s at adapter %d, address 0x%02x.\n", 357 type_name, i2c_adapter_id(adapter), client->addr); 358 strlcpy(info->type, type_name, I2C_NAME_SIZE); 359 360 return 0; 361 } 362 363 static int adm1021_probe(struct i2c_client *client, 364 const struct i2c_device_id *id) 365 { 366 struct adm1021_data *data; 367 int err; 368 369 data = devm_kzalloc(&client->dev, sizeof(struct adm1021_data), 370 GFP_KERNEL); 371 if (!data) { 372 pr_debug("adm1021: detect failed, devm_kzalloc failed!\n"); 373 return -ENOMEM; 374 } 375 376 i2c_set_clientdata(client, data); 377 data->type = id->driver_data; 378 mutex_init(&data->update_lock); 379 380 /* Initialize the ADM1021 chip */ 381 if (data->type != lm84 && !read_only) 382 adm1021_init_client(client); 383 384 /* Register sysfs hooks */ 385 err = sysfs_create_group(&client->dev.kobj, &adm1021_group); 386 if (err) 387 return err; 388 389 data->hwmon_dev = hwmon_device_register(&client->dev); 390 if (IS_ERR(data->hwmon_dev)) { 391 err = PTR_ERR(data->hwmon_dev); 392 goto error; 393 } 394 395 return 0; 396 397 error: 398 sysfs_remove_group(&client->dev.kobj, &adm1021_group); 399 return err; 400 } 401 402 static void adm1021_init_client(struct i2c_client *client) 403 { 404 /* Enable ADC and disable suspend mode */ 405 i2c_smbus_write_byte_data(client, ADM1021_REG_CONFIG_W, 406 i2c_smbus_read_byte_data(client, ADM1021_REG_CONFIG_R) & 0xBF); 407 /* Set Conversion rate to 1/sec (this can be tinkered with) */ 408 i2c_smbus_write_byte_data(client, ADM1021_REG_CONV_RATE_W, 0x04); 409 } 410 411 static int adm1021_remove(struct i2c_client *client) 412 { 413 struct adm1021_data *data = i2c_get_clientdata(client); 414 415 hwmon_device_unregister(data->hwmon_dev); 416 sysfs_remove_group(&client->dev.kobj, &adm1021_group); 417 418 return 0; 419 } 420 421 static struct adm1021_data *adm1021_update_device(struct device *dev) 422 { 423 struct i2c_client *client = to_i2c_client(dev); 424 struct adm1021_data *data = i2c_get_clientdata(client); 425 426 mutex_lock(&data->update_lock); 427 428 if (time_after(jiffies, data->last_updated + HZ + HZ / 2) 429 || !data->valid) { 430 int i; 431 432 dev_dbg(&client->dev, "Starting adm1021 update\n"); 433 434 for (i = 0; i < 2; i++) { 435 data->temp[i] = 1000 * 436 (s8) i2c_smbus_read_byte_data( 437 client, ADM1021_REG_TEMP(i)); 438 data->temp_max[i] = 1000 * 439 (s8) i2c_smbus_read_byte_data( 440 client, ADM1021_REG_TOS_R(i)); 441 data->temp_min[i] = 1000 * 442 (s8) i2c_smbus_read_byte_data( 443 client, ADM1021_REG_THYST_R(i)); 444 } 445 data->alarms = i2c_smbus_read_byte_data(client, 446 ADM1021_REG_STATUS) & 0x7c; 447 if (data->type == adm1023) { 448 /* 449 * The ADM1023 provides 3 extra bits of precision for 450 * the remote sensor in extra registers. 451 */ 452 data->temp[1] += 125 * (i2c_smbus_read_byte_data( 453 client, ADM1023_REG_REM_TEMP_PREC) >> 5); 454 data->temp_max[1] += 125 * (i2c_smbus_read_byte_data( 455 client, ADM1023_REG_REM_TOS_PREC) >> 5); 456 data->temp_min[1] += 125 * (i2c_smbus_read_byte_data( 457 client, ADM1023_REG_REM_THYST_PREC) >> 5); 458 data->remote_temp_offset = 459 i2c_smbus_read_byte_data(client, 460 ADM1023_REG_REM_OFFSET); 461 data->remote_temp_offset_prec = 462 i2c_smbus_read_byte_data(client, 463 ADM1023_REG_REM_OFFSET_PREC); 464 } 465 data->last_updated = jiffies; 466 data->valid = 1; 467 } 468 469 mutex_unlock(&data->update_lock); 470 471 return data; 472 } 473 474 module_i2c_driver(adm1021_driver); 475 476 MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and " 477 "Philip Edelbrock <phil@netroedge.com>"); 478 MODULE_DESCRIPTION("adm1021 driver"); 479 MODULE_LICENSE("GPL"); 480 481 module_param(read_only, bool, 0); 482 MODULE_PARM_DESC(read_only, "Don't set any values, read only mode"); 483