1# 2# Hardware monitoring chip drivers configuration 3# 4 5menuconfig HWMON 6 tristate "Hardware Monitoring support" 7 depends on HAS_IOMEM 8 default y 9 help 10 Hardware monitoring devices let you monitor the hardware health 11 of a system. Most modern motherboards include such a device. It 12 can include temperature sensors, voltage sensors, fan speed 13 sensors and various additional features such as the ability to 14 control the speed of the fans. If you want this support you 15 should say Y here and also to the specific driver(s) for your 16 sensors chip(s) below. 17 18 To find out which specific driver(s) you need, use the 19 sensors-detect script from the lm_sensors package. Read 20 <file:Documentation/hwmon/userspace-tools> for details. 21 22 This support can also be built as a module. If so, the module 23 will be called hwmon. 24 25if HWMON 26 27config HWMON_VID 28 tristate 29 default n 30 31config HWMON_DEBUG_CHIP 32 bool "Hardware Monitoring Chip debugging messages" 33 default n 34 help 35 Say Y here if you want the I2C chip drivers to produce a bunch of 36 debug messages to the system log. Select this if you are having 37 a problem with I2C support and want to see more of what is going 38 on. 39 40comment "Native drivers" 41 42config SENSORS_ABITUGURU 43 tristate "Abit uGuru (rev 1 & 2)" 44 depends on X86 && EXPERIMENTAL 45 help 46 If you say yes here you get support for the sensor part of the first 47 and second revision of the Abit uGuru chip. The voltage and frequency 48 control parts of the Abit uGuru are not supported. The Abit uGuru 49 chip can be found on Abit uGuru featuring motherboards (most modern 50 Abit motherboards from before end 2005). For more info and a list 51 of which motherboards have which revision see 52 Documentation/hwmon/abituguru 53 54 This driver can also be built as a module. If so, the module 55 will be called abituguru. 56 57config SENSORS_ABITUGURU3 58 tristate "Abit uGuru (rev 3)" 59 depends on X86 && EXPERIMENTAL 60 help 61 If you say yes here you get support for the sensor part of the 62 third revision of the Abit uGuru chip. Only reading the sensors 63 and their settings is supported. The third revision of the Abit 64 uGuru chip can be found on recent Abit motherboards (since end 65 2005). For more info and a list of which motherboards have which 66 revision see Documentation/hwmon/abituguru3 67 68 This driver can also be built as a module. If so, the module 69 will be called abituguru3. 70 71config SENSORS_AD7414 72 tristate "Analog Devices AD7414" 73 depends on I2C && EXPERIMENTAL 74 help 75 If you say yes here you get support for the Analog Devices 76 AD7414 temperature monitoring chip. 77 78 This driver can also be built as a module. If so, the module 79 will be called ad7414. 80 81config SENSORS_AD7418 82 tristate "Analog Devices AD7416, AD7417 and AD7418" 83 depends on I2C && EXPERIMENTAL 84 help 85 If you say yes here you get support for the Analog Devices 86 AD7416, AD7417 and AD7418 temperature monitoring chips. 87 88 This driver can also be built as a module. If so, the module 89 will be called ad7418. 90 91config SENSORS_ADCXX 92 tristate "National Semiconductor ADCxxxSxxx" 93 depends on SPI_MASTER && EXPERIMENTAL 94 help 95 If you say yes here you get support for the National Semiconductor 96 ADC<bb><c>S<sss> chip family, where 97 * bb is the resolution in number of bits (8, 10, 12) 98 * c is the number of channels (1, 2, 4, 8) 99 * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 100 kSPS and 101 for 1 MSPS) 101 102 Examples : ADC081S101, ADC124S501, ... 103 104 This driver can also be built as a module. If so, the module 105 will be called adcxx. 106 107config SENSORS_ADM1021 108 tristate "Analog Devices ADM1021 and compatibles" 109 depends on I2C 110 help 111 If you say yes here you get support for Analog Devices ADM1021 112 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, 113 Genesys Logic GL523SM, National Semiconductor LM84, TI THMC10, 114 and the XEON processor built-in sensor. 115 116 This driver can also be built as a module. If so, the module 117 will be called adm1021. 118 119config SENSORS_ADM1025 120 tristate "Analog Devices ADM1025 and compatibles" 121 depends on I2C 122 select HWMON_VID 123 help 124 If you say yes here you get support for Analog Devices ADM1025 125 and Philips NE1619 sensor chips. 126 127 This driver can also be built as a module. If so, the module 128 will be called adm1025. 129 130config SENSORS_ADM1026 131 tristate "Analog Devices ADM1026 and compatibles" 132 depends on I2C 133 select HWMON_VID 134 help 135 If you say yes here you get support for Analog Devices ADM1026 136 sensor chip. 137 138 This driver can also be built as a module. If so, the module 139 will be called adm1026. 140 141config SENSORS_ADM1029 142 tristate "Analog Devices ADM1029" 143 depends on I2C 144 help 145 If you say yes here you get support for Analog Devices ADM1029 146 sensor chip. 147 Very rare chip, please let us know you use it. 148 149 This driver can also be built as a module. If so, the module 150 will be called adm1029. 151 152config SENSORS_ADM1031 153 tristate "Analog Devices ADM1031 and compatibles" 154 depends on I2C 155 help 156 If you say yes here you get support for Analog Devices ADM1031 157 and ADM1030 sensor chips. 158 159 This driver can also be built as a module. If so, the module 160 will be called adm1031. 161 162config SENSORS_ADM9240 163 tristate "Analog Devices ADM9240 and compatibles" 164 depends on I2C 165 select HWMON_VID 166 help 167 If you say yes here you get support for Analog Devices ADM9240, 168 Dallas DS1780, National Semiconductor LM81 sensor chips. 169 170 This driver can also be built as a module. If so, the module 171 will be called adm9240. 172 173config SENSORS_ADT7411 174 tristate "Analog Devices ADT7411" 175 depends on I2C && EXPERIMENTAL 176 help 177 If you say yes here you get support for the Analog Devices 178 ADT7411 voltage and temperature monitoring chip. 179 180 This driver can also be built as a module. If so, the module 181 will be called adt7411. 182 183config SENSORS_ADT7462 184 tristate "Analog Devices ADT7462" 185 depends on I2C && EXPERIMENTAL 186 help 187 If you say yes here you get support for the Analog Devices 188 ADT7462 temperature monitoring chips. 189 190 This driver can also be built as a module. If so, the module 191 will be called adt7462. 192 193config SENSORS_ADT7470 194 tristate "Analog Devices ADT7470" 195 depends on I2C && EXPERIMENTAL 196 help 197 If you say yes here you get support for the Analog Devices 198 ADT7470 temperature monitoring chips. 199 200 This driver can also be built as a module. If so, the module 201 will be called adt7470. 202 203config SENSORS_ADT7475 204 tristate "Analog Devices ADT7473, ADT7475, ADT7476 and ADT7490" 205 depends on I2C 206 select HWMON_VID 207 help 208 If you say yes here you get support for the Analog Devices 209 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring 210 chips. 211 212 This driver can also be build as a module. If so, the module 213 will be called adt7475. 214 215config SENSORS_ASC7621 216 tristate "Andigilog aSC7621" 217 depends on HWMON && I2C 218 help 219 If you say yes here you get support for the aSC7621 220 family of SMBus sensors chip found on most Intel X38, X48, X58, 221 945, 965 and 975 desktop boards. Currently supported chips: 222 aSC7621 223 aSC7621a 224 225 This driver can also be built as a module. If so, the module 226 will be called asc7621. 227 228config SENSORS_K8TEMP 229 tristate "AMD Athlon64/FX or Opteron temperature sensor" 230 depends on X86 && PCI && EXPERIMENTAL 231 help 232 If you say yes here you get support for the temperature 233 sensor(s) inside your CPU. Supported is whole AMD K8 234 microarchitecture. Please note that you will need at least 235 lm-sensors 2.10.1 for proper userspace support. 236 237 This driver can also be built as a module. If so, the module 238 will be called k8temp. 239 240config SENSORS_K10TEMP 241 tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor" 242 depends on X86 && PCI 243 help 244 If you say yes here you get support for the temperature 245 sensor(s) inside your CPU. Supported are later revisions of 246 the AMD Family 10h and all revisions of the AMD Family 11h 247 microarchitectures. 248 249 This driver can also be built as a module. If so, the module 250 will be called k10temp. 251 252config SENSORS_ASB100 253 tristate "Asus ASB100 Bach" 254 depends on X86 && I2C && EXPERIMENTAL 255 select HWMON_VID 256 help 257 If you say yes here you get support for the ASB100 Bach sensor 258 chip found on some Asus mainboards. 259 260 This driver can also be built as a module. If so, the module 261 will be called asb100. 262 263config SENSORS_ATXP1 264 tristate "Attansic ATXP1 VID controller" 265 depends on I2C && EXPERIMENTAL 266 select HWMON_VID 267 help 268 If you say yes here you get support for the Attansic ATXP1 VID 269 controller. 270 271 If your board have such a chip, you are able to control your CPU 272 core and other voltages. 273 274 This driver can also be built as a module. If so, the module 275 will be called atxp1. 276 277config SENSORS_DS620 278 tristate "Dallas Semiconductor DS620" 279 depends on I2C 280 help 281 If you say yes here you get support for Dallas Semiconductor 282 DS620 sensor chip. 283 284 This driver can also be built as a module. If so, the module 285 will be called ds620. 286 287config SENSORS_DS1621 288 tristate "Dallas Semiconductor DS1621 and DS1625" 289 depends on I2C 290 help 291 If you say yes here you get support for Dallas Semiconductor 292 DS1621 and DS1625 sensor chips. 293 294 This driver can also be built as a module. If so, the module 295 will be called ds1621. 296 297config SENSORS_I5K_AMB 298 tristate "FB-DIMM AMB temperature sensor on Intel 5000 series chipsets" 299 depends on PCI && EXPERIMENTAL 300 help 301 If you say yes here you get support for FB-DIMM AMB temperature 302 monitoring chips on systems with the Intel 5000 series chipset. 303 304 This driver can also be built as a module. If so, the module 305 will be called i5k_amb. 306 307config SENSORS_F71805F 308 tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" 309 help 310 If you say yes here you get support for hardware monitoring 311 features of the Fintek F71805F/FG, F71806F/FG and F71872F/FG 312 Super-I/O chips. 313 314 This driver can also be built as a module. If so, the module 315 will be called f71805f. 316 317config SENSORS_F71882FG 318 tristate "Fintek F71858FG, F71862FG, F71882FG, F71889FG and F8000" 319 help 320 If you say yes here you get support for hardware monitoring 321 features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG, 322 F71889FG and F8000 Super-I/O chips. 323 324 This driver can also be built as a module. If so, the module 325 will be called f71882fg. 326 327config SENSORS_F75375S 328 tristate "Fintek F75375S/SP and F75373" 329 depends on I2C 330 help 331 If you say yes here you get support for hardware monitoring 332 features of the Fintek F75375S/SP and F75373 333 334 This driver can also be built as a module. If so, the module 335 will be called f75375s. 336 337config SENSORS_FSCHMD 338 tristate "Fujitsu Siemens Computers sensor chips" 339 depends on X86 && I2C 340 help 341 If you say yes here you get support for the following Fujitsu 342 Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, 343 Heimdall, Heracles, Hades and Syleus including support for the 344 integrated watchdog. 345 346 This is a merged driver for FSC sensor chips replacing the fscpos, 347 fscscy and fscher drivers and adding support for several other FSC 348 sensor chips. 349 350 This driver can also be built as a module. If so, the module 351 will be called fschmd. 352 353config SENSORS_G760A 354 tristate "GMT G760A" 355 depends on I2C 356 help 357 If you say yes here you get support for Global Mixed-mode 358 Technology Inc G760A fan speed PWM controller chips. 359 360 This driver can also be built as a module. If so, the module 361 will be called g760a. 362 363config SENSORS_GL518SM 364 tristate "Genesys Logic GL518SM" 365 depends on I2C 366 help 367 If you say yes here you get support for Genesys Logic GL518SM 368 sensor chips. 369 370 This driver can also be built as a module. If so, the module 371 will be called gl518sm. 372 373config SENSORS_GL520SM 374 tristate "Genesys Logic GL520SM" 375 depends on I2C 376 select HWMON_VID 377 help 378 If you say yes here you get support for Genesys Logic GL520SM 379 sensor chips. 380 381 This driver can also be built as a module. If so, the module 382 will be called gl520sm. 383 384config SENSORS_GPIO_FAN 385 tristate "GPIO fan" 386 depends on GENERIC_GPIO 387 help 388 If you say yes here you get support for fans connected to GPIO lines. 389 390 This driver can also be built as a module. If so, the module 391 will be called gpio-fan. 392 393config SENSORS_CORETEMP 394 tristate "Intel Core/Core2/Atom temperature sensor" 395 depends on X86 && PCI && EXPERIMENTAL 396 help 397 If you say yes here you get support for the temperature 398 sensor inside your CPU. Most of the family 6 CPUs 399 are supported. Check Documentation/hwmon/coretemp for details. 400 401config SENSORS_PKGTEMP 402 tristate "Intel processor package temperature sensor" 403 depends on X86 && EXPERIMENTAL 404 help 405 If you say yes here you get support for the package level temperature 406 sensor inside your CPU. Check documentation/driver for details. 407 408config SENSORS_IBMAEM 409 tristate "IBM Active Energy Manager temperature/power sensors and control" 410 select IPMI_SI 411 depends on IPMI_HANDLER 412 help 413 If you say yes here you get support for the temperature and 414 power sensors and capping hardware in various IBM System X 415 servers that support Active Energy Manager. This includes 416 the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, 417 and certain HC10/HS2x/LS2x/QS2x blades. 418 419 This driver can also be built as a module. If so, the module 420 will be called ibmaem. 421 422config SENSORS_IBMPEX 423 tristate "IBM PowerExecutive temperature/power sensors" 424 select IPMI_SI 425 depends on IPMI_HANDLER 426 help 427 If you say yes here you get support for the temperature and 428 power sensors in various IBM System X servers that support 429 PowerExecutive. So far this includes the x3350, x3550, x3650, 430 x3655, and x3755; the x3800, x3850, and x3950 models that have 431 PCI Express; and some of the HS2x, LS2x, and QS2x blades. 432 433 This driver can also be built as a module. If so, the module 434 will be called ibmpex. 435 436config SENSORS_IT87 437 tristate "ITE IT87xx and compatibles" 438 select HWMON_VID 439 help 440 If you say yes here you get support for ITE IT8705F, IT8712F, 441 IT8716F, IT8718F, IT8720F, IT8721F, IT8726F and IT8758E sensor 442 chips, and the SiS960 clone. 443 444 This driver can also be built as a module. If so, the module 445 will be called it87. 446 447config SENSORS_JZ4740 448 tristate "Ingenic JZ4740 SoC ADC driver" 449 depends on MACH_JZ4740 && MFD_JZ4740_ADC 450 help 451 If you say yes here you get support for reading adc values from the ADCIN 452 pin on Ingenic JZ4740 SoC based boards. 453 454 This driver can also be build as a module. If so, the module will be 455 called jz4740-hwmon. 456 457config SENSORS_JC42 458 tristate "JEDEC JC42.4 compliant temperature sensors" 459 depends on I2C 460 help 461 If you say yes here you get support for Jedec JC42.4 compliant 462 temperature sensors. Support will include, but not be limited to, 463 ADT7408, CAT34TS02,, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243, 464 MCP9843, SE97, SE98, STTS424, TSE2002B3, and TS3000B3. 465 466 This driver can also be built as a module. If so, the module 467 will be called jc42. 468 469config SENSORS_LM63 470 tristate "National Semiconductor LM63 and LM64" 471 depends on I2C 472 help 473 If you say yes here you get support for the National 474 Semiconductor LM63 and LM64 remote diode digital temperature 475 sensors with integrated fan control. Such chips are found 476 on the Tyan S4882 (Thunder K8QS Pro) motherboard, among 477 others. 478 479 This driver can also be built as a module. If so, the module 480 will be called lm63. 481 482config SENSORS_LM70 483 tristate "National Semiconductor LM70 / Texas Instruments TMP121" 484 depends on SPI_MASTER 485 help 486 If you say yes here you get support for the National Semiconductor 487 LM70 and Texas Instruments TMP121/TMP123 digital temperature 488 sensor chips. 489 490 This driver can also be built as a module. If so, the module 491 will be called lm70. 492 493config SENSORS_LM73 494 tristate "National Semiconductor LM73" 495 depends on I2C 496 help 497 If you say yes here you get support for National Semiconductor LM73 498 sensor chips. 499 This driver can also be built as a module. If so, the module 500 will be called lm73. 501 502config SENSORS_LM75 503 tristate "National Semiconductor LM75 and compatibles" 504 depends on I2C 505 help 506 If you say yes here you get support for one common type of 507 temperature sensor chip, with models including: 508 509 - Dallas Semiconductor DS75 and DS1775 510 - Maxim MAX6625 and MAX6626 511 - Microchip MCP980x 512 - National Semiconductor LM75 513 - NXP's LM75A 514 - ST Microelectronics STDS75 515 - TelCom (now Microchip) TCN75 516 - Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175, 517 TMP275 518 519 This driver supports driver model based binding through board 520 specific I2C device tables. 521 522 It also supports the "legacy" style of driver binding. To use 523 that with some chips which don't replicate LM75 quirks exactly, 524 you may need the "force" module parameter. 525 526 This driver can also be built as a module. If so, the module 527 will be called lm75. 528 529config SENSORS_LM77 530 tristate "National Semiconductor LM77" 531 depends on I2C 532 help 533 If you say yes here you get support for National Semiconductor LM77 534 sensor chips. 535 536 This driver can also be built as a module. If so, the module 537 will be called lm77. 538 539config SENSORS_LM78 540 tristate "National Semiconductor LM78 and compatibles" 541 depends on I2C 542 select HWMON_VID 543 help 544 If you say yes here you get support for National Semiconductor LM78, 545 LM78-J and LM79. 546 547 This driver can also be built as a module. If so, the module 548 will be called lm78. 549 550config SENSORS_LM80 551 tristate "National Semiconductor LM80" 552 depends on I2C 553 help 554 If you say yes here you get support for National Semiconductor 555 LM80 sensor chips. 556 557 This driver can also be built as a module. If so, the module 558 will be called lm80. 559 560config SENSORS_LM83 561 tristate "National Semiconductor LM83 and compatibles" 562 depends on I2C 563 help 564 If you say yes here you get support for National Semiconductor 565 LM82 and LM83 sensor chips. 566 567 This driver can also be built as a module. If so, the module 568 will be called lm83. 569 570config SENSORS_LM85 571 tristate "National Semiconductor LM85 and compatibles" 572 depends on I2C 573 select HWMON_VID 574 help 575 If you say yes here you get support for National Semiconductor LM85 576 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, 577 EMC6D101 and EMC6D102. 578 579 This driver can also be built as a module. If so, the module 580 will be called lm85. 581 582config SENSORS_LM87 583 tristate "National Semiconductor LM87 and compatibles" 584 depends on I2C 585 select HWMON_VID 586 help 587 If you say yes here you get support for National Semiconductor LM87 588 and Analog Devices ADM1024 sensor chips. 589 590 This driver can also be built as a module. If so, the module 591 will be called lm87. 592 593config SENSORS_LM90 594 tristate "National Semiconductor LM90 and compatibles" 595 depends on I2C 596 help 597 If you say yes here you get support for National Semiconductor LM90, 598 LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim 599 MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, 600 MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, and Winbond/Nuvoton 601 W83L771W/G/AWG/ASG sensor chips. 602 603 This driver can also be built as a module. If so, the module 604 will be called lm90. 605 606config SENSORS_LM92 607 tristate "National Semiconductor LM92 and compatibles" 608 depends on I2C 609 help 610 If you say yes here you get support for National Semiconductor LM92 611 and Maxim MAX6635 sensor chips. 612 613 This driver can also be built as a module. If so, the module 614 will be called lm92. 615 616config SENSORS_LM93 617 tristate "National Semiconductor LM93 and compatibles" 618 depends on I2C 619 select HWMON_VID 620 help 621 If you say yes here you get support for National Semiconductor LM93, 622 LM94, and compatible sensor chips. 623 624 This driver can also be built as a module. If so, the module 625 will be called lm93. 626 627config SENSORS_LTC4215 628 tristate "Linear Technology LTC4215" 629 depends on I2C && EXPERIMENTAL 630 default n 631 help 632 If you say yes here you get support for Linear Technology LTC4215 633 Hot Swap Controller I2C interface. 634 635 This driver can also be built as a module. If so, the module will 636 be called ltc4215. 637 638config SENSORS_LTC4245 639 tristate "Linear Technology LTC4245" 640 depends on I2C && EXPERIMENTAL 641 default n 642 help 643 If you say yes here you get support for Linear Technology LTC4245 644 Multiple Supply Hot Swap Controller I2C interface. 645 646 This driver can also be built as a module. If so, the module will 647 be called ltc4245. 648 649config SENSORS_LTC4261 650 tristate "Linear Technology LTC4261" 651 depends on I2C && EXPERIMENTAL 652 default n 653 help 654 If you say yes here you get support for Linear Technology LTC4261 655 Negative Voltage Hot Swap Controller I2C interface. 656 657 This driver can also be built as a module. If so, the module will 658 be called ltc4261. 659 660config SENSORS_LM95241 661 tristate "National Semiconductor LM95241 sensor chip" 662 depends on I2C 663 help 664 If you say yes here you get support for LM95241 sensor chip. 665 666 This driver can also be built as a module. If so, the module 667 will be called lm95241. 668 669config SENSORS_MAX1111 670 tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip" 671 depends on SPI_MASTER 672 help 673 Say y here to support Maxim's MAX1111 ADC chips. 674 675 This driver can also be built as a module. If so, the module 676 will be called max1111. 677 678config SENSORS_MAX1619 679 tristate "Maxim MAX1619 sensor chip" 680 depends on I2C 681 help 682 If you say yes here you get support for MAX1619 sensor chip. 683 684 This driver can also be built as a module. If so, the module 685 will be called max1619. 686 687config SENSORS_MAX6650 688 tristate "Maxim MAX6650 sensor chip" 689 depends on I2C && EXPERIMENTAL 690 help 691 If you say yes here you get support for the MAX6650 / MAX6651 692 sensor chips. 693 694 This driver can also be built as a module. If so, the module 695 will be called max6650. 696 697config SENSORS_PC87360 698 tristate "National Semiconductor PC87360 family" 699 select HWMON_VID 700 help 701 If you say yes here you get access to the hardware monitoring 702 functions of the National Semiconductor PC8736x Super-I/O chips. 703 The PC87360, PC87363 and PC87364 only have fan monitoring and 704 control. The PC87365 and PC87366 additionally have voltage and 705 temperature monitoring. 706 707 This driver can also be built as a module. If so, the module 708 will be called pc87360. 709 710config SENSORS_PC87427 711 tristate "National Semiconductor PC87427" 712 help 713 If you say yes here you get access to the hardware monitoring 714 functions of the National Semiconductor PC87427 Super-I/O chip. 715 The chip has two distinct logical devices, one for fan speed 716 monitoring and control, and one for voltage and temperature 717 monitoring. Fan speed monitoring and control are supported, as 718 well as temperature monitoring. Voltages aren't supported yet. 719 720 This driver can also be built as a module. If so, the module 721 will be called pc87427. 722 723config SENSORS_PCF8591 724 tristate "Philips PCF8591 ADC/DAC" 725 depends on I2C 726 default n 727 help 728 If you say yes here you get support for Philips PCF8591 4-channel 729 ADC, 1-channel DAC chips. 730 731 This driver can also be built as a module. If so, the module 732 will be called pcf8591. 733 734 These devices are hard to detect and rarely found on mainstream 735 hardware. If unsure, say N. 736 737config SENSORS_SHT15 738 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." 739 depends on GENERIC_GPIO 740 help 741 If you say yes here you get support for the Sensiron SHT10, SHT11, 742 SHT15, SHT71, SHT75 humidity and temperature sensors. 743 744 This driver can also be built as a module. If so, the module 745 will be called sht15. 746 747config SENSORS_SHT21 748 tristate "Sensiron humidity and temperature sensors. SHT21 and compat." 749 depends on I2C 750 help 751 If you say yes here you get support for the Sensiron SHT21, SHT25 752 humidity and temperature sensors. 753 754 This driver can also be built as a module. If so, the module 755 will be called sht21. 756 757config SENSORS_S3C 758 tristate "Samsung built-in ADC" 759 depends on S3C_ADC 760 help 761 If you say yes here you get support for the on-board ADCs of 762 the Samsung S3C24XX, S3C64XX and other series of SoC 763 764 This driver can also be built as a module. If so, the module 765 will be called s3c-hwmon. 766 767config SENSORS_S3C_RAW 768 bool "Include raw channel attributes in sysfs" 769 depends on SENSORS_S3C 770 help 771 Say Y here if you want to include raw copies of all the ADC 772 channels in sysfs. 773 774config SENSORS_SIS5595 775 tristate "Silicon Integrated Systems Corp. SiS5595" 776 depends on PCI 777 help 778 If you say yes here you get support for the integrated sensors in 779 SiS5595 South Bridges. 780 781 This driver can also be built as a module. If so, the module 782 will be called sis5595. 783 784config SENSORS_SMM665 785 tristate "Summit Microelectronics SMM665" 786 depends on I2C && EXPERIMENTAL 787 default n 788 help 789 If you say yes here you get support for the hardware monitoring 790 features of the Summit Microelectronics SMM665/SMM665B Six-Channel 791 Active DC Output Controller / Monitor. 792 793 Other supported chips are SMM465, SMM665C, SMM764, and SMM766. 794 Support for those chips is untested. 795 796 This driver can also be built as a module. If so, the module will 797 be called smm665. 798 799config SENSORS_DME1737 800 tristate "SMSC DME1737, SCH311x and compatibles" 801 depends on I2C && EXPERIMENTAL 802 select HWMON_VID 803 help 804 If you say yes here you get support for the hardware monitoring 805 and fan control features of the SMSC DME1737, SCH311x, SCH5027, and 806 Asus A8000 Super-I/O chips. 807 808 This driver can also be built as a module. If so, the module 809 will be called dme1737. 810 811config SENSORS_EMC1403 812 tristate "SMSC EMC1403/23 thermal sensor" 813 depends on I2C 814 help 815 If you say yes here you get support for the SMSC EMC1403/23 816 temperature monitoring chip. 817 818 Threshold values can be configured using sysfs. 819 Data from the different diodes are accessible via sysfs. 820 821config SENSORS_EMC2103 822 tristate "SMSC EMC2103" 823 depends on I2C 824 help 825 If you say yes here you get support for the temperature 826 and fan sensors of the SMSC EMC2103 chips. 827 828 This driver can also be built as a module. If so, the module 829 will be called emc2103. 830 831config SENSORS_SMSC47M1 832 tristate "SMSC LPC47M10x and compatibles" 833 help 834 If you say yes here you get support for the integrated fan 835 monitoring and control capabilities of the SMSC LPC47B27x, 836 LPC47M10x, LPC47M112, LPC47M13x, LPC47M14x, LPC47M15x, 837 LPC47M192, LPC47M292 and LPC47M997 chips. 838 839 The temperature and voltage sensor features of the LPC47M15x, 840 LPC47M192, LPC47M292 and LPC47M997 are supported by another 841 driver, select also "SMSC LPC47M192 and compatibles" below for 842 those. 843 844 This driver can also be built as a module. If so, the module 845 will be called smsc47m1. 846 847config SENSORS_SMSC47M192 848 tristate "SMSC LPC47M192 and compatibles" 849 depends on I2C 850 select HWMON_VID 851 help 852 If you say yes here you get support for the temperature and 853 voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292 854 and LPC47M997 chips. 855 856 The fan monitoring and control capabilities of these chips 857 are supported by another driver, select 858 "SMSC LPC47M10x and compatibles" above. You need both drivers 859 if you want fan control and voltage/temperature sensor support. 860 861 This driver can also be built as a module. If so, the module 862 will be called smsc47m192. 863 864config SENSORS_SMSC47B397 865 tristate "SMSC LPC47B397-NC" 866 depends on EXPERIMENTAL 867 help 868 If you say yes here you get support for the SMSC LPC47B397-NC 869 sensor chip. 870 871 This driver can also be built as a module. If so, the module 872 will be called smsc47b397. 873 874config SENSORS_ADS7828 875 tristate "Texas Instruments ADS7828" 876 depends on I2C 877 help 878 If you say yes here you get support for Texas Instruments ADS7828 879 12-bit 8-channel ADC device. 880 881 This driver can also be built as a module. If so, the module 882 will be called ads7828. 883 884config SENSORS_ADS7871 885 tristate "Texas Instruments ADS7871 A/D converter" 886 depends on SPI 887 help 888 If you say yes here you get support for TI ADS7871 & ADS7870 889 890 This driver can also be built as a module. If so, the module 891 will be called ads7871. 892 893config SENSORS_AMC6821 894 tristate "Texas Instruments AMC6821" 895 depends on I2C && EXPERIMENTAL 896 help 897 If you say yes here you get support for the Texas Instruments 898 AMC6821 hardware monitoring chips. 899 900 This driver can also be build as a module. If so, the module 901 will be called amc6821. 902 903config SENSORS_THMC50 904 tristate "Texas Instruments THMC50 / Analog Devices ADM1022" 905 depends on I2C 906 help 907 If you say yes here you get support for Texas Instruments THMC50 908 sensor chips and clones: the Analog Devices ADM1022. 909 910 This driver can also be built as a module. If so, the module 911 will be called thmc50. 912 913config SENSORS_TMP102 914 tristate "Texas Instruments TMP102" 915 depends on I2C && EXPERIMENTAL 916 help 917 If you say yes here you get support for Texas Instruments TMP102 918 sensor chips. 919 920 This driver can also be built as a module. If so, the module 921 will be called tmp102. 922 923config SENSORS_TMP401 924 tristate "Texas Instruments TMP401 and compatibles" 925 depends on I2C && EXPERIMENTAL 926 help 927 If you say yes here you get support for Texas Instruments TMP401 and 928 TMP411 temperature sensor chips. 929 930 This driver can also be built as a module. If so, the module 931 will be called tmp401. 932 933config SENSORS_TMP421 934 tristate "Texas Instruments TMP421 and compatible" 935 depends on I2C && EXPERIMENTAL 936 help 937 If you say yes here you get support for Texas Instruments TMP421, 938 TMP422 and TMP423 temperature sensor chips. 939 940 This driver can also be built as a module. If so, the module 941 will be called tmp421. 942 943config SENSORS_VIA_CPUTEMP 944 tristate "VIA CPU temperature sensor" 945 depends on X86 946 help 947 If you say yes here you get support for the temperature 948 sensor inside your CPU. Supported are all known variants of 949 the VIA C7 and Nano. 950 951config SENSORS_VIA686A 952 tristate "VIA686A" 953 depends on PCI 954 help 955 If you say yes here you get support for the integrated sensors in 956 Via 686A/B South Bridges. 957 958 This driver can also be built as a module. If so, the module 959 will be called via686a. 960 961config SENSORS_VT1211 962 tristate "VIA VT1211" 963 select HWMON_VID 964 help 965 If you say yes here then you get support for hardware monitoring 966 features of the VIA VT1211 Super-I/O chip. 967 968 This driver can also be built as a module. If so, the module 969 will be called vt1211. 970 971config SENSORS_VT8231 972 tristate "VIA VT8231" 973 depends on PCI 974 select HWMON_VID 975 help 976 If you say yes here then you get support for the integrated sensors 977 in the VIA VT8231 device. 978 979 This driver can also be built as a module. If so, the module 980 will be called vt8231. 981 982config SENSORS_W83781D 983 tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F" 984 depends on I2C 985 select HWMON_VID 986 help 987 If you say yes here you get support for the Winbond W8378x series 988 of sensor chips: the W83781D, W83782D and W83783S, and the similar 989 Asus AS99127F. 990 991 This driver can also be built as a module. If so, the module 992 will be called w83781d. 993 994config SENSORS_W83791D 995 tristate "Winbond W83791D" 996 depends on I2C 997 select HWMON_VID 998 help 999 If you say yes here you get support for the Winbond W83791D chip. 1000 1001 This driver can also be built as a module. If so, the module 1002 will be called w83791d. 1003 1004config SENSORS_W83792D 1005 tristate "Winbond W83792D" 1006 depends on I2C 1007 help 1008 If you say yes here you get support for the Winbond W83792D chip. 1009 1010 This driver can also be built as a module. If so, the module 1011 will be called w83792d. 1012 1013config SENSORS_W83793 1014 tristate "Winbond W83793" 1015 depends on I2C && EXPERIMENTAL 1016 select HWMON_VID 1017 help 1018 If you say yes here you get support for the Winbond W83793 1019 hardware monitoring chip, including support for the integrated 1020 watchdog. 1021 1022 This driver can also be built as a module. If so, the module 1023 will be called w83793. 1024 1025config SENSORS_W83795 1026 tristate "Winbond/Nuvoton W83795G/ADG" 1027 depends on I2C && EXPERIMENTAL 1028 help 1029 If you say yes here you get support for the Winbond W83795G and 1030 W83795ADG hardware monitoring chip. 1031 1032 This driver can also be built as a module. If so, the module 1033 will be called w83795. 1034 1035config SENSORS_W83795_FANCTRL 1036 boolean "Include fan control support (DANGEROUS)" 1037 depends on SENSORS_W83795 && EXPERIMENTAL 1038 default n 1039 help 1040 If you say yes here, support for the both manual and automatic 1041 fan control features will be included in the driver. 1042 1043 This part of the code wasn't carefully reviewed and tested yet, 1044 so enabling this option is strongly discouraged on production 1045 servers. Only developers and testers should enable it for the 1046 time being. 1047 1048 Please also note that this option will create sysfs attribute 1049 files which may change in the future, so you shouldn't rely 1050 on them being stable. 1051 1052config SENSORS_W83L785TS 1053 tristate "Winbond W83L785TS-S" 1054 depends on I2C && EXPERIMENTAL 1055 help 1056 If you say yes here you get support for the Winbond W83L785TS-S 1057 sensor chip, which is used on the Asus A7N8X, among other 1058 motherboards. 1059 1060 This driver can also be built as a module. If so, the module 1061 will be called w83l785ts. 1062 1063config SENSORS_W83L786NG 1064 tristate "Winbond W83L786NG, W83L786NR" 1065 depends on I2C && EXPERIMENTAL 1066 help 1067 If you say yes here you get support for the Winbond W83L786NG 1068 and W83L786NR sensor chips. 1069 1070 This driver can also be built as a module. If so, the module 1071 will be called w83l786ng. 1072 1073config SENSORS_W83627HF 1074 tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" 1075 select HWMON_VID 1076 help 1077 If you say yes here you get support for the Winbond W836X7 series 1078 of sensor chips: the W83627HF, W83627THF, W83637HF, W83687THF and 1079 W83697HF. 1080 1081 This driver can also be built as a module. If so, the module 1082 will be called w83627hf. 1083 1084config SENSORS_W83627EHF 1085 tristate "Winbond W83627EHF/EHG/DHG, W83667HG" 1086 select HWMON_VID 1087 help 1088 If you say yes here you get support for the hardware 1089 monitoring functionality of the Winbond W83627EHF Super-I/O chip. 1090 1091 This driver also supports the W83627EHG, which is the lead-free 1092 version of the W83627EHF, and the W83627DHG, which is a similar 1093 chip suited for specific Intel processors that use PECI such as 1094 the Core 2 Duo. 1095 1096 This driver also supports the W83667HG chip. 1097 1098 This driver can also be built as a module. If so, the module 1099 will be called w83627ehf. 1100 1101config SENSORS_WM831X 1102 tristate "WM831x PMICs" 1103 depends on MFD_WM831X 1104 help 1105 If you say yes here you get support for the hardware 1106 monitoring functionality of the Wolfson Microelectronics 1107 WM831x series of PMICs. 1108 1109 This driver can also be built as a module. If so, the module 1110 will be called wm831x-hwmon. 1111 1112config SENSORS_WM8350 1113 tristate "Wolfson Microelectronics WM835x" 1114 depends on MFD_WM8350 1115 help 1116 If you say yes here you get support for the hardware 1117 monitoring features of the WM835x series of PMICs. 1118 1119 This driver can also be built as a module. If so, the module 1120 will be called wm8350-hwmon. 1121 1122config SENSORS_ULTRA45 1123 tristate "Sun Ultra45 PIC16F747" 1124 depends on SPARC64 1125 help 1126 This driver provides support for the Ultra45 workstation environmental 1127 sensors. 1128 1129config SENSORS_LIS3_SPI 1130 tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (SPI)" 1131 depends on !ACPI && SPI_MASTER && INPUT 1132 select INPUT_POLLDEV 1133 default n 1134 help 1135 This driver provides support for the LIS3LV02Dx accelerometer connected 1136 via SPI. The accelerometer data is readable via 1137 /sys/devices/platform/lis3lv02d. 1138 1139 This driver also provides an absolute input class device, allowing 1140 the laptop to act as a pinball machine-esque joystick. 1141 1142 This driver can also be built as modules. If so, the core module 1143 will be called lis3lv02d and a specific module for the SPI transport 1144 is called lis3lv02d_spi. 1145 1146config SENSORS_LIS3_I2C 1147 tristate "STMicroeletronics LIS3LV02Dx three-axis digital accelerometer (I2C)" 1148 depends on I2C && INPUT 1149 select INPUT_POLLDEV 1150 default n 1151 help 1152 This driver provides support for the LIS3LV02Dx accelerometer connected 1153 via I2C. The accelerometer data is readable via 1154 /sys/devices/platform/lis3lv02d. 1155 1156 This driver also provides an absolute input class device, allowing 1157 the device to act as a pinball machine-esque joystick. 1158 1159 This driver can also be built as modules. If so, the core module 1160 will be called lis3lv02d and a specific module for the I2C transport 1161 is called lis3lv02d_i2c. 1162 1163config SENSORS_APPLESMC 1164 tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" 1165 depends on INPUT && X86 1166 select NEW_LEDS 1167 select LEDS_CLASS 1168 select INPUT_POLLDEV 1169 default n 1170 help 1171 This driver provides support for the Apple System Management 1172 Controller, which provides an accelerometer (Apple Sudden Motion 1173 Sensor), light sensors, temperature sensors, keyboard backlight 1174 control and fan control. 1175 1176 Only Intel-based Apple's computers are supported (MacBook Pro, 1177 MacBook, MacMini). 1178 1179 Data from the different sensors, keyboard backlight control and fan 1180 control are accessible via sysfs. 1181 1182 This driver also provides an absolute input class device, allowing 1183 the laptop to act as a pinball machine-esque joystick. 1184 1185 Say Y here if you have an applicable laptop and want to experience 1186 the awesome power of applesmc. 1187 1188config SENSORS_MC13783_ADC 1189 tristate "Freescale MC13783 ADC" 1190 depends on MFD_MC13783 1191 help 1192 Support for the A/D converter on MC13783 PMIC. 1193 1194if ACPI 1195 1196comment "ACPI drivers" 1197 1198config SENSORS_ATK0110 1199 tristate "ASUS ATK0110" 1200 depends on X86 && EXPERIMENTAL 1201 help 1202 If you say yes here you get support for the ACPI hardware 1203 monitoring interface found in many ASUS motherboards. This 1204 driver will provide readings of fans, voltages and temperatures 1205 through the system firmware. 1206 1207 This driver can also be built as a module. If so, the module 1208 will be called asus_atk0110. 1209 1210config SENSORS_LIS3LV02D 1211 tristate "STMicroeletronics LIS3* three-axis digital accelerometer" 1212 depends on INPUT 1213 select INPUT_POLLDEV 1214 select NEW_LEDS 1215 select LEDS_CLASS 1216 default n 1217 help 1218 This driver provides support for the LIS3* accelerometers, such as the 1219 LIS3LV02DL or the LIS331DL. In particular, it can be found in a number 1220 of HP laptops, which have the "Mobile Data Protection System 3D" or 1221 "3D DriveGuard" feature. On such systems the driver should load 1222 automatically (via ACPI alias). The accelerometer might also be found 1223 in other systems, connected via SPI or I2C. The accelerometer data is 1224 readable via /sys/devices/platform/lis3lv02d. 1225 1226 This driver also provides an absolute input class device, allowing 1227 a laptop to act as a pinball machine-esque joystick. It provides also 1228 a misc device which can be used to detect free-fall. On HP laptops, 1229 if the led infrastructure is activated, support for a led indicating 1230 disk protection will be provided as hp::hddprotect. For more 1231 information on the feature, refer to Documentation/hwmon/lis3lv02d. 1232 1233 This driver can also be built as modules. If so, the core module 1234 will be called lis3lv02d and a specific module for HP laptops will be 1235 called hp_accel. 1236 1237 Say Y here if you have an applicable laptop and want to experience 1238 the awesome power of lis3lv02d. 1239 1240endif # ACPI 1241 1242endif # HWMON 1243