xref: /openbmc/linux/drivers/hid/wacom_sys.c (revision 15b7cc78)
1 /*
2  * drivers/input/tablet/wacom_sys.c
3  *
4  *  USB Wacom tablet support - system specific code
5  */
6 
7 /*
8  * This program is free software; you can redistribute it and/or modify
9  * it under the terms of the GNU General Public License as published by
10  * the Free Software Foundation; either version 2 of the License, or
11  * (at your option) any later version.
12  */
13 
14 #include "wacom_wac.h"
15 #include "wacom.h"
16 #include <linux/input/mt.h>
17 
18 #define WAC_MSG_RETRIES		5
19 
20 #define WAC_CMD_WL_LED_CONTROL	0x03
21 #define WAC_CMD_LED_CONTROL	0x20
22 #define WAC_CMD_ICON_START	0x21
23 #define WAC_CMD_ICON_XFER	0x23
24 #define WAC_CMD_ICON_BT_XFER	0x26
25 #define WAC_CMD_RETRIES		10
26 #define WAC_CMD_DELETE_PAIRING	0x20
27 #define WAC_CMD_UNPAIR_ALL	0xFF
28 #define WAC_REMOTE_SERIAL_MAX_STRLEN	9
29 
30 #define DEV_ATTR_RW_PERM (S_IRUGO | S_IWUSR | S_IWGRP)
31 #define DEV_ATTR_WO_PERM (S_IWUSR | S_IWGRP)
32 #define DEV_ATTR_RO_PERM (S_IRUSR | S_IRGRP)
33 
34 static int wacom_get_report(struct hid_device *hdev, u8 type, u8 *buf,
35 			    size_t size, unsigned int retries)
36 {
37 	int retval;
38 
39 	do {
40 		retval = hid_hw_raw_request(hdev, buf[0], buf, size, type,
41 				HID_REQ_GET_REPORT);
42 	} while ((retval == -ETIMEDOUT || retval == -EAGAIN) && --retries);
43 
44 	if (retval < 0)
45 		hid_err(hdev, "wacom_get_report: ran out of retries "
46 			"(last error = %d)\n", retval);
47 
48 	return retval;
49 }
50 
51 static int wacom_set_report(struct hid_device *hdev, u8 type, u8 *buf,
52 			    size_t size, unsigned int retries)
53 {
54 	int retval;
55 
56 	do {
57 		retval = hid_hw_raw_request(hdev, buf[0], buf, size, type,
58 				HID_REQ_SET_REPORT);
59 	} while ((retval == -ETIMEDOUT || retval == -EAGAIN) && --retries);
60 
61 	if (retval < 0)
62 		hid_err(hdev, "wacom_set_report: ran out of retries "
63 			"(last error = %d)\n", retval);
64 
65 	return retval;
66 }
67 
68 static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
69 		u8 *raw_data, int size)
70 {
71 	struct wacom *wacom = hid_get_drvdata(hdev);
72 
73 	if (size > WACOM_PKGLEN_MAX)
74 		return 1;
75 
76 	memcpy(wacom->wacom_wac.data, raw_data, size);
77 
78 	wacom_wac_irq(&wacom->wacom_wac, size);
79 
80 	return 0;
81 }
82 
83 static int wacom_open(struct input_dev *dev)
84 {
85 	struct wacom *wacom = input_get_drvdata(dev);
86 
87 	return hid_hw_open(wacom->hdev);
88 }
89 
90 static void wacom_close(struct input_dev *dev)
91 {
92 	struct wacom *wacom = input_get_drvdata(dev);
93 
94 	hid_hw_close(wacom->hdev);
95 }
96 
97 /*
98  * Calculate the resolution of the X or Y axis using hidinput_calc_abs_res.
99  */
100 static int wacom_calc_hid_res(int logical_extents, int physical_extents,
101 			       unsigned unit, int exponent)
102 {
103 	struct hid_field field = {
104 		.logical_maximum = logical_extents,
105 		.physical_maximum = physical_extents,
106 		.unit = unit,
107 		.unit_exponent = exponent,
108 	};
109 
110 	return hidinput_calc_abs_res(&field, ABS_X);
111 }
112 
113 static void wacom_feature_mapping(struct hid_device *hdev,
114 		struct hid_field *field, struct hid_usage *usage)
115 {
116 	struct wacom *wacom = hid_get_drvdata(hdev);
117 	struct wacom_features *features = &wacom->wacom_wac.features;
118 	struct hid_data *hid_data = &wacom->wacom_wac.hid_data;
119 	u8 *data;
120 	int ret;
121 
122 	switch (usage->hid) {
123 	case HID_DG_CONTACTMAX:
124 		/* leave touch_max as is if predefined */
125 		if (!features->touch_max) {
126 			/* read manually */
127 			data = kzalloc(2, GFP_KERNEL);
128 			if (!data)
129 				break;
130 			data[0] = field->report->id;
131 			ret = wacom_get_report(hdev, HID_FEATURE_REPORT,
132 						data, 2, WAC_CMD_RETRIES);
133 			if (ret == 2) {
134 				features->touch_max = data[1];
135 			} else {
136 				features->touch_max = 16;
137 				hid_warn(hdev, "wacom_feature_mapping: "
138 					 "could not get HID_DG_CONTACTMAX, "
139 					 "defaulting to %d\n",
140 					  features->touch_max);
141 			}
142 			kfree(data);
143 		}
144 		break;
145 	case HID_DG_INPUTMODE:
146 		/* Ignore if value index is out of bounds. */
147 		if (usage->usage_index >= field->report_count) {
148 			dev_err(&hdev->dev, "HID_DG_INPUTMODE out of range\n");
149 			break;
150 		}
151 
152 		hid_data->inputmode = field->report->id;
153 		hid_data->inputmode_index = usage->usage_index;
154 		break;
155 
156 	case HID_UP_DIGITIZER:
157 		if (field->report->id == 0x0B &&
158 		    (field->application == WACOM_G9_DIGITIZER ||
159 		     field->application == WACOM_G11_DIGITIZER)) {
160 			wacom->wacom_wac.mode_report = field->report->id;
161 			wacom->wacom_wac.mode_value = 0;
162 		}
163 		break;
164 
165 	case WACOM_G9_PAGE:
166 	case WACOM_G11_PAGE:
167 		if (field->report->id == 0x03 &&
168 		    (field->application == WACOM_G9_TOUCHSCREEN ||
169 		     field->application == WACOM_G11_TOUCHSCREEN)) {
170 			wacom->wacom_wac.mode_report = field->report->id;
171 			wacom->wacom_wac.mode_value = 0;
172 		}
173 		break;
174 	}
175 }
176 
177 /*
178  * Interface Descriptor of wacom devices can be incomplete and
179  * inconsistent so wacom_features table is used to store stylus
180  * device's packet lengths, various maximum values, and tablet
181  * resolution based on product ID's.
182  *
183  * For devices that contain 2 interfaces, wacom_features table is
184  * inaccurate for the touch interface.  Since the Interface Descriptor
185  * for touch interfaces has pretty complete data, this function exists
186  * to query tablet for this missing information instead of hard coding in
187  * an additional table.
188  *
189  * A typical Interface Descriptor for a stylus will contain a
190  * boot mouse application collection that is not of interest and this
191  * function will ignore it.
192  *
193  * It also contains a digitizer application collection that also is not
194  * of interest since any information it contains would be duplicate
195  * of what is in wacom_features. Usually it defines a report of an array
196  * of bytes that could be used as max length of the stylus packet returned.
197  * If it happens to define a Digitizer-Stylus Physical Collection then
198  * the X and Y logical values contain valid data but it is ignored.
199  *
200  * A typical Interface Descriptor for a touch interface will contain a
201  * Digitizer-Finger Physical Collection which will define both logical
202  * X/Y maximum as well as the physical size of tablet. Since touch
203  * interfaces haven't supported pressure or distance, this is enough
204  * information to override invalid values in the wacom_features table.
205  *
206  * Intuos5 touch interface and 3rd gen Bamboo Touch do not contain useful
207  * data. We deal with them after returning from this function.
208  */
209 static void wacom_usage_mapping(struct hid_device *hdev,
210 		struct hid_field *field, struct hid_usage *usage)
211 {
212 	struct wacom *wacom = hid_get_drvdata(hdev);
213 	struct wacom_features *features = &wacom->wacom_wac.features;
214 	bool finger = WACOM_FINGER_FIELD(field);
215 	bool pen = WACOM_PEN_FIELD(field);
216 
217 	/*
218 	* Requiring Stylus Usage will ignore boot mouse
219 	* X/Y values and some cases of invalid Digitizer X/Y
220 	* values commonly reported.
221 	*/
222 	if (pen)
223 		features->device_type |= WACOM_DEVICETYPE_PEN;
224 	else if (finger)
225 		features->device_type |= WACOM_DEVICETYPE_TOUCH;
226 	else
227 		return;
228 
229 	/*
230 	 * Bamboo models do not support HID_DG_CONTACTMAX.
231 	 * And, Bamboo Pen only descriptor contains touch.
232 	 */
233 	if (features->type > BAMBOO_PT) {
234 		/* ISDv4 touch devices at least supports one touch point */
235 		if (finger && !features->touch_max)
236 			features->touch_max = 1;
237 	}
238 
239 	switch (usage->hid) {
240 	case HID_GD_X:
241 		features->x_max = field->logical_maximum;
242 		if (finger) {
243 			features->x_phy = field->physical_maximum;
244 			if ((features->type != BAMBOO_PT) &&
245 			    (features->type != BAMBOO_TOUCH)) {
246 				features->unit = field->unit;
247 				features->unitExpo = field->unit_exponent;
248 			}
249 		}
250 		break;
251 	case HID_GD_Y:
252 		features->y_max = field->logical_maximum;
253 		if (finger) {
254 			features->y_phy = field->physical_maximum;
255 			if ((features->type != BAMBOO_PT) &&
256 			    (features->type != BAMBOO_TOUCH)) {
257 				features->unit = field->unit;
258 				features->unitExpo = field->unit_exponent;
259 			}
260 		}
261 		break;
262 	case HID_DG_TIPPRESSURE:
263 		if (pen)
264 			features->pressure_max = field->logical_maximum;
265 		break;
266 	}
267 
268 	if (features->type == HID_GENERIC)
269 		wacom_wac_usage_mapping(hdev, field, usage);
270 }
271 
272 static void wacom_post_parse_hid(struct hid_device *hdev,
273 				 struct wacom_features *features)
274 {
275 	struct wacom *wacom = hid_get_drvdata(hdev);
276 	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
277 
278 	if (features->type == HID_GENERIC) {
279 		/* Any last-minute generic device setup */
280 		if (features->touch_max > 1) {
281 			input_mt_init_slots(wacom_wac->touch_input, wacom_wac->features.touch_max,
282 				    INPUT_MT_DIRECT);
283 		}
284 	}
285 }
286 
287 static void wacom_parse_hid(struct hid_device *hdev,
288 			   struct wacom_features *features)
289 {
290 	struct hid_report_enum *rep_enum;
291 	struct hid_report *hreport;
292 	int i, j;
293 
294 	/* check features first */
295 	rep_enum = &hdev->report_enum[HID_FEATURE_REPORT];
296 	list_for_each_entry(hreport, &rep_enum->report_list, list) {
297 		for (i = 0; i < hreport->maxfield; i++) {
298 			/* Ignore if report count is out of bounds. */
299 			if (hreport->field[i]->report_count < 1)
300 				continue;
301 
302 			for (j = 0; j < hreport->field[i]->maxusage; j++) {
303 				wacom_feature_mapping(hdev, hreport->field[i],
304 						hreport->field[i]->usage + j);
305 			}
306 		}
307 	}
308 
309 	/* now check the input usages */
310 	rep_enum = &hdev->report_enum[HID_INPUT_REPORT];
311 	list_for_each_entry(hreport, &rep_enum->report_list, list) {
312 
313 		if (!hreport->maxfield)
314 			continue;
315 
316 		for (i = 0; i < hreport->maxfield; i++)
317 			for (j = 0; j < hreport->field[i]->maxusage; j++)
318 				wacom_usage_mapping(hdev, hreport->field[i],
319 						hreport->field[i]->usage + j);
320 	}
321 
322 	wacom_post_parse_hid(hdev, features);
323 }
324 
325 static int wacom_hid_set_device_mode(struct hid_device *hdev)
326 {
327 	struct wacom *wacom = hid_get_drvdata(hdev);
328 	struct hid_data *hid_data = &wacom->wacom_wac.hid_data;
329 	struct hid_report *r;
330 	struct hid_report_enum *re;
331 
332 	if (hid_data->inputmode < 0)
333 		return 0;
334 
335 	re = &(hdev->report_enum[HID_FEATURE_REPORT]);
336 	r = re->report_id_hash[hid_data->inputmode];
337 	if (r) {
338 		r->field[0]->value[hid_data->inputmode_index] = 2;
339 		hid_hw_request(hdev, r, HID_REQ_SET_REPORT);
340 	}
341 	return 0;
342 }
343 
344 static int wacom_set_device_mode(struct hid_device *hdev,
345 				 struct wacom_wac *wacom_wac)
346 {
347 	u8 *rep_data;
348 	struct hid_report *r;
349 	struct hid_report_enum *re;
350 	int length;
351 	int error = -ENOMEM, limit = 0;
352 
353 	if (wacom_wac->mode_report < 0)
354 		return 0;
355 
356 	re = &(hdev->report_enum[HID_FEATURE_REPORT]);
357 	r = re->report_id_hash[wacom_wac->mode_report];
358 	if (!r)
359 		return -EINVAL;
360 
361 	rep_data = hid_alloc_report_buf(r, GFP_KERNEL);
362 	if (!rep_data)
363 		return -ENOMEM;
364 
365 	length = hid_report_len(r);
366 
367 	do {
368 		rep_data[0] = wacom_wac->mode_report;
369 		rep_data[1] = wacom_wac->mode_value;
370 
371 		error = wacom_set_report(hdev, HID_FEATURE_REPORT, rep_data,
372 					 length, 1);
373 		if (error >= 0)
374 			error = wacom_get_report(hdev, HID_FEATURE_REPORT,
375 			                         rep_data, length, 1);
376 	} while (error >= 0 &&
377 		 rep_data[1] != wacom_wac->mode_report &&
378 		 limit++ < WAC_MSG_RETRIES);
379 
380 	kfree(rep_data);
381 
382 	return error < 0 ? error : 0;
383 }
384 
385 static int wacom_bt_query_tablet_data(struct hid_device *hdev, u8 speed,
386 		struct wacom_features *features)
387 {
388 	struct wacom *wacom = hid_get_drvdata(hdev);
389 	int ret;
390 	u8 rep_data[2];
391 
392 	switch (features->type) {
393 	case GRAPHIRE_BT:
394 		rep_data[0] = 0x03;
395 		rep_data[1] = 0x00;
396 		ret = wacom_set_report(hdev, HID_FEATURE_REPORT, rep_data, 2,
397 					3);
398 
399 		if (ret >= 0) {
400 			rep_data[0] = speed == 0 ? 0x05 : 0x06;
401 			rep_data[1] = 0x00;
402 
403 			ret = wacom_set_report(hdev, HID_FEATURE_REPORT,
404 						rep_data, 2, 3);
405 
406 			if (ret >= 0) {
407 				wacom->wacom_wac.bt_high_speed = speed;
408 				return 0;
409 			}
410 		}
411 
412 		/*
413 		 * Note that if the raw queries fail, it's not a hard failure
414 		 * and it is safe to continue
415 		 */
416 		hid_warn(hdev, "failed to poke device, command %d, err %d\n",
417 			 rep_data[0], ret);
418 		break;
419 	case INTUOS4WL:
420 		if (speed == 1)
421 			wacom->wacom_wac.bt_features &= ~0x20;
422 		else
423 			wacom->wacom_wac.bt_features |= 0x20;
424 
425 		rep_data[0] = 0x03;
426 		rep_data[1] = wacom->wacom_wac.bt_features;
427 
428 		ret = wacom_set_report(hdev, HID_FEATURE_REPORT, rep_data, 2,
429 					1);
430 		if (ret >= 0)
431 			wacom->wacom_wac.bt_high_speed = speed;
432 		break;
433 	}
434 
435 	return 0;
436 }
437 
438 /*
439  * Switch the tablet into its most-capable mode. Wacom tablets are
440  * typically configured to power-up in a mode which sends mouse-like
441  * reports to the OS. To get absolute position, pressure data, etc.
442  * from the tablet, it is necessary to switch the tablet out of this
443  * mode and into one which sends the full range of tablet data.
444  */
445 static int wacom_query_tablet_data(struct hid_device *hdev,
446 		struct wacom_features *features)
447 {
448 	struct wacom *wacom = hid_get_drvdata(hdev);
449 	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
450 
451 	if (hdev->bus == BUS_BLUETOOTH)
452 		return wacom_bt_query_tablet_data(hdev, 1, features);
453 
454 	if (features->type != HID_GENERIC) {
455 		if (features->device_type & WACOM_DEVICETYPE_TOUCH) {
456 			if (features->type > TABLETPC) {
457 				/* MT Tablet PC touch */
458 				wacom_wac->mode_report = 3;
459 				wacom_wac->mode_value = 4;
460 			} else if (features->type == WACOM_24HDT) {
461 				wacom_wac->mode_report = 18;
462 				wacom_wac->mode_value = 2;
463 			} else if (features->type == WACOM_27QHDT) {
464 				wacom_wac->mode_report = 131;
465 				wacom_wac->mode_value = 2;
466 			} else if (features->type == BAMBOO_PAD) {
467 				wacom_wac->mode_report = 2;
468 				wacom_wac->mode_value = 2;
469 			}
470 		} else if (features->device_type & WACOM_DEVICETYPE_PEN) {
471 			if (features->type <= BAMBOO_PT) {
472 				wacom_wac->mode_report = 2;
473 				wacom_wac->mode_value = 2;
474 			}
475 		}
476 	}
477 
478 	wacom_set_device_mode(hdev, wacom_wac);
479 
480 	if (features->type == HID_GENERIC)
481 		return wacom_hid_set_device_mode(hdev);
482 
483 	return 0;
484 }
485 
486 static void wacom_retrieve_hid_descriptor(struct hid_device *hdev,
487 					 struct wacom_features *features)
488 {
489 	struct wacom *wacom = hid_get_drvdata(hdev);
490 	struct usb_interface *intf = wacom->intf;
491 
492 	/* default features */
493 	features->x_fuzz = 4;
494 	features->y_fuzz = 4;
495 	features->pressure_fuzz = 0;
496 	features->distance_fuzz = 1;
497 	features->tilt_fuzz = 1;
498 
499 	/*
500 	 * The wireless device HID is basic and layout conflicts with
501 	 * other tablets (monitor and touch interface can look like pen).
502 	 * Skip the query for this type and modify defaults based on
503 	 * interface number.
504 	 */
505 	if (features->type == WIRELESS) {
506 		if (intf->cur_altsetting->desc.bInterfaceNumber == 0)
507 			features->device_type = WACOM_DEVICETYPE_WL_MONITOR;
508 		else
509 			features->device_type = WACOM_DEVICETYPE_NONE;
510 		return;
511 	}
512 
513 	wacom_parse_hid(hdev, features);
514 }
515 
516 struct wacom_hdev_data {
517 	struct list_head list;
518 	struct kref kref;
519 	struct hid_device *dev;
520 	struct wacom_shared shared;
521 };
522 
523 static LIST_HEAD(wacom_udev_list);
524 static DEFINE_MUTEX(wacom_udev_list_lock);
525 
526 static bool wacom_are_sibling(struct hid_device *hdev,
527 		struct hid_device *sibling)
528 {
529 	struct wacom *wacom = hid_get_drvdata(hdev);
530 	struct wacom_features *features = &wacom->wacom_wac.features;
531 	int vid = features->oVid;
532 	int pid = features->oPid;
533 	int n1,n2;
534 
535 	if (vid == 0 && pid == 0) {
536 		vid = hdev->vendor;
537 		pid = hdev->product;
538 	}
539 
540 	if (vid != sibling->vendor || pid != sibling->product)
541 		return false;
542 
543 	/* Compare the physical path. */
544 	n1 = strrchr(hdev->phys, '.') - hdev->phys;
545 	n2 = strrchr(sibling->phys, '.') - sibling->phys;
546 	if (n1 != n2 || n1 <= 0 || n2 <= 0)
547 		return false;
548 
549 	return !strncmp(hdev->phys, sibling->phys, n1);
550 }
551 
552 static struct wacom_hdev_data *wacom_get_hdev_data(struct hid_device *hdev)
553 {
554 	struct wacom_hdev_data *data;
555 
556 	list_for_each_entry(data, &wacom_udev_list, list) {
557 		if (wacom_are_sibling(hdev, data->dev)) {
558 			kref_get(&data->kref);
559 			return data;
560 		}
561 	}
562 
563 	return NULL;
564 }
565 
566 static int wacom_add_shared_data(struct hid_device *hdev)
567 {
568 	struct wacom *wacom = hid_get_drvdata(hdev);
569 	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
570 	struct wacom_hdev_data *data;
571 	int retval = 0;
572 
573 	mutex_lock(&wacom_udev_list_lock);
574 
575 	data = wacom_get_hdev_data(hdev);
576 	if (!data) {
577 		data = kzalloc(sizeof(struct wacom_hdev_data), GFP_KERNEL);
578 		if (!data) {
579 			retval = -ENOMEM;
580 			goto out;
581 		}
582 
583 		kref_init(&data->kref);
584 		data->dev = hdev;
585 		list_add_tail(&data->list, &wacom_udev_list);
586 	}
587 
588 	wacom_wac->shared = &data->shared;
589 
590 	if (wacom_wac->features.device_type & WACOM_DEVICETYPE_TOUCH)
591 		wacom_wac->shared->touch = hdev;
592 	else if (wacom_wac->features.device_type & WACOM_DEVICETYPE_PEN)
593 		wacom_wac->shared->pen = hdev;
594 
595 out:
596 	mutex_unlock(&wacom_udev_list_lock);
597 	return retval;
598 }
599 
600 static void wacom_release_shared_data(struct kref *kref)
601 {
602 	struct wacom_hdev_data *data =
603 		container_of(kref, struct wacom_hdev_data, kref);
604 
605 	mutex_lock(&wacom_udev_list_lock);
606 	list_del(&data->list);
607 	mutex_unlock(&wacom_udev_list_lock);
608 
609 	kfree(data);
610 }
611 
612 static void wacom_remove_shared_data(struct wacom *wacom)
613 {
614 	struct wacom_hdev_data *data;
615 	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
616 
617 	if (wacom_wac->shared) {
618 		data = container_of(wacom_wac->shared, struct wacom_hdev_data,
619 				    shared);
620 
621 		if (wacom_wac->shared->touch == wacom->hdev)
622 			wacom_wac->shared->touch = NULL;
623 		else if (wacom_wac->shared->pen == wacom->hdev)
624 			wacom_wac->shared->pen = NULL;
625 
626 		kref_put(&data->kref, wacom_release_shared_data);
627 		wacom_wac->shared = NULL;
628 	}
629 }
630 
631 static int wacom_led_control(struct wacom *wacom)
632 {
633 	unsigned char *buf;
634 	int retval;
635 	unsigned char report_id = WAC_CMD_LED_CONTROL;
636 	int buf_size = 9;
637 
638 	if (wacom->wacom_wac.pid) { /* wireless connected */
639 		report_id = WAC_CMD_WL_LED_CONTROL;
640 		buf_size = 13;
641 	}
642 	buf = kzalloc(buf_size, GFP_KERNEL);
643 	if (!buf)
644 		return -ENOMEM;
645 
646 	if (wacom->wacom_wac.features.type >= INTUOS5S &&
647 	    wacom->wacom_wac.features.type <= INTUOSPL) {
648 		/*
649 		 * Touch Ring and crop mark LED luminance may take on
650 		 * one of four values:
651 		 *    0 = Low; 1 = Medium; 2 = High; 3 = Off
652 		 */
653 		int ring_led = wacom->led.select[0] & 0x03;
654 		int ring_lum = (((wacom->led.llv & 0x60) >> 5) - 1) & 0x03;
655 		int crop_lum = 0;
656 		unsigned char led_bits = (crop_lum << 4) | (ring_lum << 2) | (ring_led);
657 
658 		buf[0] = report_id;
659 		if (wacom->wacom_wac.pid) {
660 			wacom_get_report(wacom->hdev, HID_FEATURE_REPORT,
661 					 buf, buf_size, WAC_CMD_RETRIES);
662 			buf[0] = report_id;
663 			buf[4] = led_bits;
664 		} else
665 			buf[1] = led_bits;
666 	}
667 	else {
668 		int led = wacom->led.select[0] | 0x4;
669 
670 		if (wacom->wacom_wac.features.type == WACOM_21UX2 ||
671 		    wacom->wacom_wac.features.type == WACOM_24HD)
672 			led |= (wacom->led.select[1] << 4) | 0x40;
673 
674 		buf[0] = report_id;
675 		buf[1] = led;
676 		buf[2] = wacom->led.llv;
677 		buf[3] = wacom->led.hlv;
678 		buf[4] = wacom->led.img_lum;
679 	}
680 
681 	retval = wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, buf, buf_size,
682 				  WAC_CMD_RETRIES);
683 	kfree(buf);
684 
685 	return retval;
686 }
687 
688 static int wacom_led_putimage(struct wacom *wacom, int button_id, u8 xfer_id,
689 		const unsigned len, const void *img)
690 {
691 	unsigned char *buf;
692 	int i, retval;
693 	const unsigned chunk_len = len / 4; /* 4 chunks are needed to be sent */
694 
695 	buf = kzalloc(chunk_len + 3 , GFP_KERNEL);
696 	if (!buf)
697 		return -ENOMEM;
698 
699 	/* Send 'start' command */
700 	buf[0] = WAC_CMD_ICON_START;
701 	buf[1] = 1;
702 	retval = wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, buf, 2,
703 				  WAC_CMD_RETRIES);
704 	if (retval < 0)
705 		goto out;
706 
707 	buf[0] = xfer_id;
708 	buf[1] = button_id & 0x07;
709 	for (i = 0; i < 4; i++) {
710 		buf[2] = i;
711 		memcpy(buf + 3, img + i * chunk_len, chunk_len);
712 
713 		retval = wacom_set_report(wacom->hdev, HID_FEATURE_REPORT,
714 					  buf, chunk_len + 3, WAC_CMD_RETRIES);
715 		if (retval < 0)
716 			break;
717 	}
718 
719 	/* Send 'stop' */
720 	buf[0] = WAC_CMD_ICON_START;
721 	buf[1] = 0;
722 	wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, buf, 2,
723 			 WAC_CMD_RETRIES);
724 
725 out:
726 	kfree(buf);
727 	return retval;
728 }
729 
730 static ssize_t wacom_led_select_store(struct device *dev, int set_id,
731 				      const char *buf, size_t count)
732 {
733 	struct hid_device *hdev = to_hid_device(dev);
734 	struct wacom *wacom = hid_get_drvdata(hdev);
735 	unsigned int id;
736 	int err;
737 
738 	err = kstrtouint(buf, 10, &id);
739 	if (err)
740 		return err;
741 
742 	mutex_lock(&wacom->lock);
743 
744 	wacom->led.select[set_id] = id & 0x3;
745 	err = wacom_led_control(wacom);
746 
747 	mutex_unlock(&wacom->lock);
748 
749 	return err < 0 ? err : count;
750 }
751 
752 #define DEVICE_LED_SELECT_ATTR(SET_ID)					\
753 static ssize_t wacom_led##SET_ID##_select_store(struct device *dev,	\
754 	struct device_attribute *attr, const char *buf, size_t count)	\
755 {									\
756 	return wacom_led_select_store(dev, SET_ID, buf, count);		\
757 }									\
758 static ssize_t wacom_led##SET_ID##_select_show(struct device *dev,	\
759 	struct device_attribute *attr, char *buf)			\
760 {									\
761 	struct hid_device *hdev = to_hid_device(dev);\
762 	struct wacom *wacom = hid_get_drvdata(hdev);			\
763 	return scnprintf(buf, PAGE_SIZE, "%d\n",			\
764 			 wacom->led.select[SET_ID]);			\
765 }									\
766 static DEVICE_ATTR(status_led##SET_ID##_select, DEV_ATTR_RW_PERM,	\
767 		    wacom_led##SET_ID##_select_show,			\
768 		    wacom_led##SET_ID##_select_store)
769 
770 DEVICE_LED_SELECT_ATTR(0);
771 DEVICE_LED_SELECT_ATTR(1);
772 
773 static ssize_t wacom_luminance_store(struct wacom *wacom, u8 *dest,
774 				     const char *buf, size_t count)
775 {
776 	unsigned int value;
777 	int err;
778 
779 	err = kstrtouint(buf, 10, &value);
780 	if (err)
781 		return err;
782 
783 	mutex_lock(&wacom->lock);
784 
785 	*dest = value & 0x7f;
786 	err = wacom_led_control(wacom);
787 
788 	mutex_unlock(&wacom->lock);
789 
790 	return err < 0 ? err : count;
791 }
792 
793 #define DEVICE_LUMINANCE_ATTR(name, field)				\
794 static ssize_t wacom_##name##_luminance_store(struct device *dev,	\
795 	struct device_attribute *attr, const char *buf, size_t count)	\
796 {									\
797 	struct hid_device *hdev = to_hid_device(dev);\
798 	struct wacom *wacom = hid_get_drvdata(hdev);			\
799 									\
800 	return wacom_luminance_store(wacom, &wacom->led.field,		\
801 				     buf, count);			\
802 }									\
803 static ssize_t wacom_##name##_luminance_show(struct device *dev,	\
804 	struct device_attribute *attr, char *buf)			\
805 {									\
806 	struct wacom *wacom = dev_get_drvdata(dev);			\
807 	return scnprintf(buf, PAGE_SIZE, "%d\n", wacom->led.field);	\
808 }									\
809 static DEVICE_ATTR(name##_luminance, DEV_ATTR_RW_PERM,			\
810 		   wacom_##name##_luminance_show,			\
811 		   wacom_##name##_luminance_store)
812 
813 DEVICE_LUMINANCE_ATTR(status0, llv);
814 DEVICE_LUMINANCE_ATTR(status1, hlv);
815 DEVICE_LUMINANCE_ATTR(buttons, img_lum);
816 
817 static ssize_t wacom_button_image_store(struct device *dev, int button_id,
818 					const char *buf, size_t count)
819 {
820 	struct hid_device *hdev = to_hid_device(dev);
821 	struct wacom *wacom = hid_get_drvdata(hdev);
822 	int err;
823 	unsigned len;
824 	u8 xfer_id;
825 
826 	if (hdev->bus == BUS_BLUETOOTH) {
827 		len = 256;
828 		xfer_id = WAC_CMD_ICON_BT_XFER;
829 	} else {
830 		len = 1024;
831 		xfer_id = WAC_CMD_ICON_XFER;
832 	}
833 
834 	if (count != len)
835 		return -EINVAL;
836 
837 	mutex_lock(&wacom->lock);
838 
839 	err = wacom_led_putimage(wacom, button_id, xfer_id, len, buf);
840 
841 	mutex_unlock(&wacom->lock);
842 
843 	return err < 0 ? err : count;
844 }
845 
846 #define DEVICE_BTNIMG_ATTR(BUTTON_ID)					\
847 static ssize_t wacom_btnimg##BUTTON_ID##_store(struct device *dev,	\
848 	struct device_attribute *attr, const char *buf, size_t count)	\
849 {									\
850 	return wacom_button_image_store(dev, BUTTON_ID, buf, count);	\
851 }									\
852 static DEVICE_ATTR(button##BUTTON_ID##_rawimg, DEV_ATTR_WO_PERM,	\
853 		   NULL, wacom_btnimg##BUTTON_ID##_store)
854 
855 DEVICE_BTNIMG_ATTR(0);
856 DEVICE_BTNIMG_ATTR(1);
857 DEVICE_BTNIMG_ATTR(2);
858 DEVICE_BTNIMG_ATTR(3);
859 DEVICE_BTNIMG_ATTR(4);
860 DEVICE_BTNIMG_ATTR(5);
861 DEVICE_BTNIMG_ATTR(6);
862 DEVICE_BTNIMG_ATTR(7);
863 
864 static struct attribute *cintiq_led_attrs[] = {
865 	&dev_attr_status_led0_select.attr,
866 	&dev_attr_status_led1_select.attr,
867 	NULL
868 };
869 
870 static struct attribute_group cintiq_led_attr_group = {
871 	.name = "wacom_led",
872 	.attrs = cintiq_led_attrs,
873 };
874 
875 static struct attribute *intuos4_led_attrs[] = {
876 	&dev_attr_status0_luminance.attr,
877 	&dev_attr_status1_luminance.attr,
878 	&dev_attr_status_led0_select.attr,
879 	&dev_attr_buttons_luminance.attr,
880 	&dev_attr_button0_rawimg.attr,
881 	&dev_attr_button1_rawimg.attr,
882 	&dev_attr_button2_rawimg.attr,
883 	&dev_attr_button3_rawimg.attr,
884 	&dev_attr_button4_rawimg.attr,
885 	&dev_attr_button5_rawimg.attr,
886 	&dev_attr_button6_rawimg.attr,
887 	&dev_attr_button7_rawimg.attr,
888 	NULL
889 };
890 
891 static struct attribute_group intuos4_led_attr_group = {
892 	.name = "wacom_led",
893 	.attrs = intuos4_led_attrs,
894 };
895 
896 static struct attribute *intuos5_led_attrs[] = {
897 	&dev_attr_status0_luminance.attr,
898 	&dev_attr_status_led0_select.attr,
899 	NULL
900 };
901 
902 static struct attribute_group intuos5_led_attr_group = {
903 	.name = "wacom_led",
904 	.attrs = intuos5_led_attrs,
905 };
906 
907 static int wacom_initialize_leds(struct wacom *wacom)
908 {
909 	int error;
910 
911 	if (!(wacom->wacom_wac.features.device_type & WACOM_DEVICETYPE_PAD))
912 		return 0;
913 
914 	/* Initialize default values */
915 	switch (wacom->wacom_wac.features.type) {
916 	case INTUOS4S:
917 	case INTUOS4:
918 	case INTUOS4WL:
919 	case INTUOS4L:
920 		wacom->led.select[0] = 0;
921 		wacom->led.select[1] = 0;
922 		wacom->led.llv = 10;
923 		wacom->led.hlv = 20;
924 		wacom->led.img_lum = 10;
925 		error = sysfs_create_group(&wacom->hdev->dev.kobj,
926 					   &intuos4_led_attr_group);
927 		break;
928 
929 	case WACOM_24HD:
930 	case WACOM_21UX2:
931 		wacom->led.select[0] = 0;
932 		wacom->led.select[1] = 0;
933 		wacom->led.llv = 0;
934 		wacom->led.hlv = 0;
935 		wacom->led.img_lum = 0;
936 
937 		error = sysfs_create_group(&wacom->hdev->dev.kobj,
938 					   &cintiq_led_attr_group);
939 		break;
940 
941 	case INTUOS5S:
942 	case INTUOS5:
943 	case INTUOS5L:
944 	case INTUOSPS:
945 	case INTUOSPM:
946 	case INTUOSPL:
947 		wacom->led.select[0] = 0;
948 		wacom->led.select[1] = 0;
949 		wacom->led.llv = 32;
950 		wacom->led.hlv = 0;
951 		wacom->led.img_lum = 0;
952 
953 		error = sysfs_create_group(&wacom->hdev->dev.kobj,
954 					  &intuos5_led_attr_group);
955 		break;
956 
957 	default:
958 		return 0;
959 	}
960 
961 	if (error) {
962 		hid_err(wacom->hdev,
963 			"cannot create sysfs group err: %d\n", error);
964 		return error;
965 	}
966 	wacom_led_control(wacom);
967 	wacom->led_initialized = true;
968 
969 	return 0;
970 }
971 
972 static void wacom_destroy_leds(struct wacom *wacom)
973 {
974 	if (!wacom->led_initialized)
975 		return;
976 
977 	if (!(wacom->wacom_wac.features.device_type & WACOM_DEVICETYPE_PAD))
978 		return;
979 
980 	wacom->led_initialized = false;
981 
982 	switch (wacom->wacom_wac.features.type) {
983 	case INTUOS4S:
984 	case INTUOS4:
985 	case INTUOS4WL:
986 	case INTUOS4L:
987 		sysfs_remove_group(&wacom->hdev->dev.kobj,
988 				   &intuos4_led_attr_group);
989 		break;
990 
991 	case WACOM_24HD:
992 	case WACOM_21UX2:
993 		sysfs_remove_group(&wacom->hdev->dev.kobj,
994 				   &cintiq_led_attr_group);
995 		break;
996 
997 	case INTUOS5S:
998 	case INTUOS5:
999 	case INTUOS5L:
1000 	case INTUOSPS:
1001 	case INTUOSPM:
1002 	case INTUOSPL:
1003 		sysfs_remove_group(&wacom->hdev->dev.kobj,
1004 				   &intuos5_led_attr_group);
1005 		break;
1006 	}
1007 }
1008 
1009 static enum power_supply_property wacom_battery_props[] = {
1010 	POWER_SUPPLY_PROP_PRESENT,
1011 	POWER_SUPPLY_PROP_STATUS,
1012 	POWER_SUPPLY_PROP_SCOPE,
1013 	POWER_SUPPLY_PROP_CAPACITY
1014 };
1015 
1016 static enum power_supply_property wacom_ac_props[] = {
1017 	POWER_SUPPLY_PROP_PRESENT,
1018 	POWER_SUPPLY_PROP_ONLINE,
1019 	POWER_SUPPLY_PROP_SCOPE,
1020 };
1021 
1022 static int wacom_battery_get_property(struct power_supply *psy,
1023 				      enum power_supply_property psp,
1024 				      union power_supply_propval *val)
1025 {
1026 	struct wacom *wacom = power_supply_get_drvdata(psy);
1027 	int ret = 0;
1028 
1029 	switch (psp) {
1030 		case POWER_SUPPLY_PROP_PRESENT:
1031 			val->intval = wacom->wacom_wac.bat_connected;
1032 			break;
1033 		case POWER_SUPPLY_PROP_SCOPE:
1034 			val->intval = POWER_SUPPLY_SCOPE_DEVICE;
1035 			break;
1036 		case POWER_SUPPLY_PROP_CAPACITY:
1037 			val->intval =
1038 				wacom->wacom_wac.battery_capacity;
1039 			break;
1040 		case POWER_SUPPLY_PROP_STATUS:
1041 			if (wacom->wacom_wac.bat_charging)
1042 				val->intval = POWER_SUPPLY_STATUS_CHARGING;
1043 			else if (wacom->wacom_wac.battery_capacity == 100 &&
1044 				    wacom->wacom_wac.ps_connected)
1045 				val->intval = POWER_SUPPLY_STATUS_FULL;
1046 			else if (wacom->wacom_wac.ps_connected)
1047 				val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
1048 			else
1049 				val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
1050 			break;
1051 		default:
1052 			ret = -EINVAL;
1053 			break;
1054 	}
1055 
1056 	return ret;
1057 }
1058 
1059 static int wacom_ac_get_property(struct power_supply *psy,
1060 				enum power_supply_property psp,
1061 				union power_supply_propval *val)
1062 {
1063 	struct wacom *wacom = power_supply_get_drvdata(psy);
1064 	int ret = 0;
1065 
1066 	switch (psp) {
1067 	case POWER_SUPPLY_PROP_PRESENT:
1068 		/* fall through */
1069 	case POWER_SUPPLY_PROP_ONLINE:
1070 		val->intval = wacom->wacom_wac.ps_connected;
1071 		break;
1072 	case POWER_SUPPLY_PROP_SCOPE:
1073 		val->intval = POWER_SUPPLY_SCOPE_DEVICE;
1074 		break;
1075 	default:
1076 		ret = -EINVAL;
1077 		break;
1078 	}
1079 	return ret;
1080 }
1081 
1082 static int wacom_initialize_battery(struct wacom *wacom)
1083 {
1084 	static atomic_t battery_no = ATOMIC_INIT(0);
1085 	struct power_supply_config psy_cfg = { .drv_data = wacom, };
1086 	unsigned long n;
1087 
1088 	if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_BATTERY) {
1089 		struct power_supply_desc *bat_desc = &wacom->battery_desc;
1090 		struct power_supply_desc *ac_desc = &wacom->ac_desc;
1091 		n = atomic_inc_return(&battery_no) - 1;
1092 
1093 		bat_desc->properties = wacom_battery_props;
1094 		bat_desc->num_properties = ARRAY_SIZE(wacom_battery_props);
1095 		bat_desc->get_property = wacom_battery_get_property;
1096 		sprintf(wacom->wacom_wac.bat_name, "wacom_battery_%ld", n);
1097 		bat_desc->name = wacom->wacom_wac.bat_name;
1098 		bat_desc->type = POWER_SUPPLY_TYPE_BATTERY;
1099 		bat_desc->use_for_apm = 0;
1100 
1101 		ac_desc->properties = wacom_ac_props;
1102 		ac_desc->num_properties = ARRAY_SIZE(wacom_ac_props);
1103 		ac_desc->get_property = wacom_ac_get_property;
1104 		sprintf(wacom->wacom_wac.ac_name, "wacom_ac_%ld", n);
1105 		ac_desc->name = wacom->wacom_wac.ac_name;
1106 		ac_desc->type = POWER_SUPPLY_TYPE_MAINS;
1107 		ac_desc->use_for_apm = 0;
1108 
1109 		wacom->battery = power_supply_register(&wacom->hdev->dev,
1110 					      &wacom->battery_desc, &psy_cfg);
1111 		if (IS_ERR(wacom->battery))
1112 			return PTR_ERR(wacom->battery);
1113 
1114 		power_supply_powers(wacom->battery, &wacom->hdev->dev);
1115 
1116 		wacom->ac = power_supply_register(&wacom->hdev->dev,
1117 						  &wacom->ac_desc,
1118 						  &psy_cfg);
1119 		if (IS_ERR(wacom->ac)) {
1120 			power_supply_unregister(wacom->battery);
1121 			return PTR_ERR(wacom->ac);
1122 		}
1123 
1124 		power_supply_powers(wacom->ac, &wacom->hdev->dev);
1125 	}
1126 
1127 	return 0;
1128 }
1129 
1130 static void wacom_destroy_battery(struct wacom *wacom)
1131 {
1132 	if (wacom->battery) {
1133 		power_supply_unregister(wacom->battery);
1134 		wacom->battery = NULL;
1135 		power_supply_unregister(wacom->ac);
1136 		wacom->ac = NULL;
1137 	}
1138 }
1139 
1140 static ssize_t wacom_show_speed(struct device *dev,
1141 				struct device_attribute
1142 				*attr, char *buf)
1143 {
1144 	struct hid_device *hdev = to_hid_device(dev);
1145 	struct wacom *wacom = hid_get_drvdata(hdev);
1146 
1147 	return snprintf(buf, PAGE_SIZE, "%i\n", wacom->wacom_wac.bt_high_speed);
1148 }
1149 
1150 static ssize_t wacom_store_speed(struct device *dev,
1151 				struct device_attribute *attr,
1152 				const char *buf, size_t count)
1153 {
1154 	struct hid_device *hdev = to_hid_device(dev);
1155 	struct wacom *wacom = hid_get_drvdata(hdev);
1156 	u8 new_speed;
1157 
1158 	if (kstrtou8(buf, 0, &new_speed))
1159 		return -EINVAL;
1160 
1161 	if (new_speed != 0 && new_speed != 1)
1162 		return -EINVAL;
1163 
1164 	wacom_bt_query_tablet_data(hdev, new_speed, &wacom->wacom_wac.features);
1165 
1166 	return count;
1167 }
1168 
1169 static DEVICE_ATTR(speed, DEV_ATTR_RW_PERM,
1170 		wacom_show_speed, wacom_store_speed);
1171 
1172 
1173 static ssize_t wacom_show_remote_mode(struct kobject *kobj,
1174 				      struct kobj_attribute *kattr,
1175 				      char *buf, int index)
1176 {
1177 	struct device *dev = kobj_to_dev(kobj->parent);
1178 	struct hid_device *hdev = to_hid_device(dev);
1179 	struct wacom *wacom = hid_get_drvdata(hdev);
1180 	u8 mode;
1181 
1182 	mode = wacom->led.select[index];
1183 	if (mode >= 0 && mode < 3)
1184 		return snprintf(buf, PAGE_SIZE, "%d\n", mode);
1185 	else
1186 		return snprintf(buf, PAGE_SIZE, "%d\n", -1);
1187 }
1188 
1189 #define DEVICE_EKR_ATTR_GROUP(SET_ID)					\
1190 static ssize_t wacom_show_remote##SET_ID##_mode(struct kobject *kobj,	\
1191 			       struct kobj_attribute *kattr, char *buf)	\
1192 {									\
1193 	return wacom_show_remote_mode(kobj, kattr, buf, SET_ID);	\
1194 }									\
1195 static struct kobj_attribute remote##SET_ID##_mode_attr = {		\
1196 	.attr = {.name = "remote_mode",					\
1197 		.mode = DEV_ATTR_RO_PERM},				\
1198 	.show = wacom_show_remote##SET_ID##_mode,			\
1199 };									\
1200 static struct attribute *remote##SET_ID##_serial_attrs[] = {		\
1201 	&remote##SET_ID##_mode_attr.attr,				\
1202 	NULL								\
1203 };									\
1204 static struct attribute_group remote##SET_ID##_serial_group = {		\
1205 	.name = NULL,							\
1206 	.attrs = remote##SET_ID##_serial_attrs,				\
1207 }
1208 
1209 DEVICE_EKR_ATTR_GROUP(0);
1210 DEVICE_EKR_ATTR_GROUP(1);
1211 DEVICE_EKR_ATTR_GROUP(2);
1212 DEVICE_EKR_ATTR_GROUP(3);
1213 DEVICE_EKR_ATTR_GROUP(4);
1214 
1215 int wacom_remote_create_attr_group(struct wacom *wacom, __u32 serial, int index)
1216 {
1217 	int error = 0;
1218 	char *buf;
1219 	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
1220 
1221 	wacom_wac->serial[index] = serial;
1222 
1223 	buf = kzalloc(WAC_REMOTE_SERIAL_MAX_STRLEN, GFP_KERNEL);
1224 	if (!buf)
1225 		return -ENOMEM;
1226 	snprintf(buf, WAC_REMOTE_SERIAL_MAX_STRLEN, "%d", serial);
1227 	wacom->remote_group[index].name = buf;
1228 
1229 	error = sysfs_create_group(wacom->remote_dir,
1230 				   &wacom->remote_group[index]);
1231 	if (error) {
1232 		hid_err(wacom->hdev,
1233 			"cannot create sysfs group err: %d\n", error);
1234 		kobject_put(wacom->remote_dir);
1235 		return error;
1236 	}
1237 
1238 	return 0;
1239 }
1240 
1241 void wacom_remote_destroy_attr_group(struct wacom *wacom, __u32 serial)
1242 {
1243 	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
1244 	int i;
1245 
1246 	if (!serial)
1247 		return;
1248 
1249 	for (i = 0; i < WACOM_MAX_REMOTES; i++) {
1250 		if (wacom_wac->serial[i] == serial) {
1251 			wacom_wac->serial[i] = 0;
1252 			wacom->led.select[i] = WACOM_STATUS_UNKNOWN;
1253 			if (wacom->remote_group[i].name) {
1254 				sysfs_remove_group(wacom->remote_dir,
1255 						   &wacom->remote_group[i]);
1256 				kfree(wacom->remote_group[i].name);
1257 				wacom->remote_group[i].name = NULL;
1258 			}
1259 		}
1260 	}
1261 }
1262 
1263 static int wacom_cmd_unpair_remote(struct wacom *wacom, unsigned char selector)
1264 {
1265 	const size_t buf_size = 2;
1266 	unsigned char *buf;
1267 	int retval;
1268 
1269 	buf = kzalloc(buf_size, GFP_KERNEL);
1270 	if (!buf)
1271 		return -ENOMEM;
1272 
1273 	buf[0] = WAC_CMD_DELETE_PAIRING;
1274 	buf[1] = selector;
1275 
1276 	retval = wacom_set_report(wacom->hdev, HID_OUTPUT_REPORT, buf,
1277 				  buf_size, WAC_CMD_RETRIES);
1278 	kfree(buf);
1279 
1280 	return retval;
1281 }
1282 
1283 static ssize_t wacom_store_unpair_remote(struct kobject *kobj,
1284 					 struct kobj_attribute *attr,
1285 					 const char *buf, size_t count)
1286 {
1287 	unsigned char selector = 0;
1288 	struct device *dev = kobj_to_dev(kobj->parent);
1289 	struct hid_device *hdev = to_hid_device(dev);
1290 	struct wacom *wacom = hid_get_drvdata(hdev);
1291 	int err;
1292 
1293 	if (!strncmp(buf, "*\n", 2)) {
1294 		selector = WAC_CMD_UNPAIR_ALL;
1295 	} else {
1296 		hid_info(wacom->hdev, "remote: unrecognized unpair code: %s\n",
1297 			 buf);
1298 		return -1;
1299 	}
1300 
1301 	mutex_lock(&wacom->lock);
1302 
1303 	err = wacom_cmd_unpair_remote(wacom, selector);
1304 	mutex_unlock(&wacom->lock);
1305 
1306 	return err < 0 ? err : count;
1307 }
1308 
1309 static struct kobj_attribute unpair_remote_attr = {
1310 	.attr = {.name = "unpair_remote", .mode = 0200},
1311 	.store = wacom_store_unpair_remote,
1312 };
1313 
1314 static const struct attribute *remote_unpair_attrs[] = {
1315 	&unpair_remote_attr.attr,
1316 	NULL
1317 };
1318 
1319 static int wacom_initialize_remote(struct wacom *wacom)
1320 {
1321 	int error = 0;
1322 	struct wacom_wac *wacom_wac = &(wacom->wacom_wac);
1323 	int i;
1324 
1325 	if (wacom->wacom_wac.features.type != REMOTE)
1326 		return 0;
1327 
1328 	wacom->remote_group[0] = remote0_serial_group;
1329 	wacom->remote_group[1] = remote1_serial_group;
1330 	wacom->remote_group[2] = remote2_serial_group;
1331 	wacom->remote_group[3] = remote3_serial_group;
1332 	wacom->remote_group[4] = remote4_serial_group;
1333 
1334 	wacom->remote_dir = kobject_create_and_add("wacom_remote",
1335 						   &wacom->hdev->dev.kobj);
1336 	if (!wacom->remote_dir)
1337 		return -ENOMEM;
1338 
1339 	error = sysfs_create_files(wacom->remote_dir, remote_unpair_attrs);
1340 
1341 	if (error) {
1342 		hid_err(wacom->hdev,
1343 			"cannot create sysfs group err: %d\n", error);
1344 		return error;
1345 	}
1346 
1347 	for (i = 0; i < WACOM_MAX_REMOTES; i++) {
1348 		wacom->led.select[i] = WACOM_STATUS_UNKNOWN;
1349 		wacom_wac->serial[i] = 0;
1350 	}
1351 
1352 	return 0;
1353 }
1354 
1355 static struct input_dev *wacom_allocate_input(struct wacom *wacom)
1356 {
1357 	struct input_dev *input_dev;
1358 	struct hid_device *hdev = wacom->hdev;
1359 	struct wacom_wac *wacom_wac = &(wacom->wacom_wac);
1360 
1361 	input_dev = input_allocate_device();
1362 	if (!input_dev)
1363 		return NULL;
1364 
1365 	input_dev->name = wacom_wac->features.name;
1366 	input_dev->phys = hdev->phys;
1367 	input_dev->dev.parent = &hdev->dev;
1368 	input_dev->open = wacom_open;
1369 	input_dev->close = wacom_close;
1370 	input_dev->uniq = hdev->uniq;
1371 	input_dev->id.bustype = hdev->bus;
1372 	input_dev->id.vendor  = hdev->vendor;
1373 	input_dev->id.product = wacom_wac->pid ? wacom_wac->pid : hdev->product;
1374 	input_dev->id.version = hdev->version;
1375 	input_set_drvdata(input_dev, wacom);
1376 
1377 	return input_dev;
1378 }
1379 
1380 static void wacom_clean_inputs(struct wacom *wacom)
1381 {
1382 	if (wacom->wacom_wac.pen_input) {
1383 		if (wacom->wacom_wac.pen_registered)
1384 			input_unregister_device(wacom->wacom_wac.pen_input);
1385 		else
1386 			input_free_device(wacom->wacom_wac.pen_input);
1387 	}
1388 	if (wacom->wacom_wac.touch_input) {
1389 		if (wacom->wacom_wac.touch_registered)
1390 			input_unregister_device(wacom->wacom_wac.touch_input);
1391 		else
1392 			input_free_device(wacom->wacom_wac.touch_input);
1393 	}
1394 	if (wacom->wacom_wac.pad_input) {
1395 		if (wacom->wacom_wac.pad_registered)
1396 			input_unregister_device(wacom->wacom_wac.pad_input);
1397 		else
1398 			input_free_device(wacom->wacom_wac.pad_input);
1399 	}
1400 	kobject_put(wacom->remote_dir);
1401 	wacom->wacom_wac.pen_input = NULL;
1402 	wacom->wacom_wac.touch_input = NULL;
1403 	wacom->wacom_wac.pad_input = NULL;
1404 	wacom->wacom_wac.pen_registered = false;
1405 	wacom->wacom_wac.touch_registered = false;
1406 	wacom->wacom_wac.pad_registered = false;
1407 	wacom_destroy_leds(wacom);
1408 }
1409 
1410 static int wacom_allocate_inputs(struct wacom *wacom)
1411 {
1412 	struct wacom_wac *wacom_wac = &(wacom->wacom_wac);
1413 
1414 	wacom_wac->pen_input = wacom_allocate_input(wacom);
1415 	wacom_wac->touch_input = wacom_allocate_input(wacom);
1416 	wacom_wac->pad_input = wacom_allocate_input(wacom);
1417 	if (!wacom_wac->pen_input || !wacom_wac->touch_input || !wacom_wac->pad_input) {
1418 		wacom_clean_inputs(wacom);
1419 		return -ENOMEM;
1420 	}
1421 
1422 	wacom_wac->pen_input->name = wacom_wac->pen_name;
1423 	wacom_wac->touch_input->name = wacom_wac->touch_name;
1424 	wacom_wac->pad_input->name = wacom_wac->pad_name;
1425 
1426 	return 0;
1427 }
1428 
1429 static int wacom_register_inputs(struct wacom *wacom)
1430 {
1431 	struct input_dev *pen_input_dev, *touch_input_dev, *pad_input_dev;
1432 	struct wacom_wac *wacom_wac = &(wacom->wacom_wac);
1433 	int error = 0;
1434 
1435 	pen_input_dev = wacom_wac->pen_input;
1436 	touch_input_dev = wacom_wac->touch_input;
1437 	pad_input_dev = wacom_wac->pad_input;
1438 
1439 	if (!pen_input_dev || !touch_input_dev || !pad_input_dev)
1440 		return -EINVAL;
1441 
1442 	error = wacom_setup_pen_input_capabilities(pen_input_dev, wacom_wac);
1443 	if (error) {
1444 		/* no pen in use on this interface */
1445 		input_free_device(pen_input_dev);
1446 		wacom_wac->pen_input = NULL;
1447 		pen_input_dev = NULL;
1448 	} else {
1449 		error = input_register_device(pen_input_dev);
1450 		if (error)
1451 			goto fail_register_pen_input;
1452 		wacom_wac->pen_registered = true;
1453 	}
1454 
1455 	error = wacom_setup_touch_input_capabilities(touch_input_dev, wacom_wac);
1456 	if (error) {
1457 		/* no touch in use on this interface */
1458 		input_free_device(touch_input_dev);
1459 		wacom_wac->touch_input = NULL;
1460 		touch_input_dev = NULL;
1461 	} else {
1462 		error = input_register_device(touch_input_dev);
1463 		if (error)
1464 			goto fail_register_touch_input;
1465 		wacom_wac->touch_registered = true;
1466 	}
1467 
1468 	error = wacom_setup_pad_input_capabilities(pad_input_dev, wacom_wac);
1469 	if (error) {
1470 		/* no pad in use on this interface */
1471 		input_free_device(pad_input_dev);
1472 		wacom_wac->pad_input = NULL;
1473 		pad_input_dev = NULL;
1474 	} else {
1475 		error = input_register_device(pad_input_dev);
1476 		if (error)
1477 			goto fail_register_pad_input;
1478 		wacom_wac->pad_registered = true;
1479 
1480 		error = wacom_initialize_leds(wacom);
1481 		if (error)
1482 			goto fail_leds;
1483 
1484 		error = wacom_initialize_remote(wacom);
1485 		if (error)
1486 			goto fail_remote;
1487 	}
1488 
1489 	return 0;
1490 
1491 fail_remote:
1492 	wacom_destroy_leds(wacom);
1493 fail_leds:
1494 	input_unregister_device(pad_input_dev);
1495 	pad_input_dev = NULL;
1496 	wacom_wac->pad_registered = false;
1497 fail_register_pad_input:
1498 	if (touch_input_dev)
1499 		input_unregister_device(touch_input_dev);
1500 	wacom_wac->touch_input = NULL;
1501 	wacom_wac->touch_registered = false;
1502 fail_register_touch_input:
1503 	if (pen_input_dev)
1504 		input_unregister_device(pen_input_dev);
1505 	wacom_wac->pen_input = NULL;
1506 	wacom_wac->pen_registered = false;
1507 fail_register_pen_input:
1508 	return error;
1509 }
1510 
1511 /*
1512  * Not all devices report physical dimensions from HID.
1513  * Compute the default from hardcoded logical dimension
1514  * and resolution before driver overwrites them.
1515  */
1516 static void wacom_set_default_phy(struct wacom_features *features)
1517 {
1518 	if (features->x_resolution) {
1519 		features->x_phy = (features->x_max * 100) /
1520 					features->x_resolution;
1521 		features->y_phy = (features->y_max * 100) /
1522 					features->y_resolution;
1523 	}
1524 }
1525 
1526 static void wacom_calculate_res(struct wacom_features *features)
1527 {
1528 	/* set unit to "100th of a mm" for devices not reported by HID */
1529 	if (!features->unit) {
1530 		features->unit = 0x11;
1531 		features->unitExpo = -3;
1532 	}
1533 
1534 	features->x_resolution = wacom_calc_hid_res(features->x_max,
1535 						    features->x_phy,
1536 						    features->unit,
1537 						    features->unitExpo);
1538 	features->y_resolution = wacom_calc_hid_res(features->y_max,
1539 						    features->y_phy,
1540 						    features->unit,
1541 						    features->unitExpo);
1542 }
1543 
1544 void wacom_battery_work(struct work_struct *work)
1545 {
1546 	struct wacom *wacom = container_of(work, struct wacom, work);
1547 
1548 	if ((wacom->wacom_wac.features.quirks & WACOM_QUIRK_BATTERY) &&
1549 	     !wacom->battery) {
1550 		wacom_initialize_battery(wacom);
1551 	}
1552 	else if (!(wacom->wacom_wac.features.quirks & WACOM_QUIRK_BATTERY) &&
1553 		 wacom->battery) {
1554 		wacom_destroy_battery(wacom);
1555 	}
1556 }
1557 
1558 static size_t wacom_compute_pktlen(struct hid_device *hdev)
1559 {
1560 	struct hid_report_enum *report_enum;
1561 	struct hid_report *report;
1562 	size_t size = 0;
1563 
1564 	report_enum = hdev->report_enum + HID_INPUT_REPORT;
1565 
1566 	list_for_each_entry(report, &report_enum->report_list, list) {
1567 		size_t report_size = hid_report_len(report);
1568 		if (report_size > size)
1569 			size = report_size;
1570 	}
1571 
1572 	return size;
1573 }
1574 
1575 static void wacom_update_name(struct wacom *wacom, const char *suffix)
1576 {
1577 	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
1578 	struct wacom_features *features = &wacom_wac->features;
1579 	char name[WACOM_NAME_MAX];
1580 
1581 	/* Generic devices name unspecified */
1582 	if ((features->type == HID_GENERIC) && !strcmp("Wacom HID", features->name)) {
1583 		if (strstr(wacom->hdev->name, "Wacom") ||
1584 		    strstr(wacom->hdev->name, "wacom") ||
1585 		    strstr(wacom->hdev->name, "WACOM")) {
1586 			/* name is in HID descriptor, use it */
1587 			strlcpy(name, wacom->hdev->name, sizeof(name));
1588 
1589 			/* strip out excess whitespaces */
1590 			while (1) {
1591 				char *gap = strstr(name, "  ");
1592 				if (gap == NULL)
1593 					break;
1594 				/* shift everything including the terminator */
1595 				memmove(gap, gap+1, strlen(gap));
1596 			}
1597 			/* get rid of trailing whitespace */
1598 			if (name[strlen(name)-1] == ' ')
1599 				name[strlen(name)-1] = '\0';
1600 		} else {
1601 			/* no meaningful name retrieved. use product ID */
1602 			snprintf(name, sizeof(name),
1603 				 "%s %X", features->name, wacom->hdev->product);
1604 		}
1605 	} else {
1606 		strlcpy(name, features->name, sizeof(name));
1607 	}
1608 
1609 	/* Append the device type to the name */
1610 	snprintf(wacom_wac->pen_name, sizeof(wacom_wac->pen_name),
1611 		"%s%s Pen", name, suffix);
1612 	snprintf(wacom_wac->touch_name, sizeof(wacom_wac->touch_name),
1613 		"%s%s Finger", name, suffix);
1614 	snprintf(wacom_wac->pad_name, sizeof(wacom_wac->pad_name),
1615 		"%s%s Pad", name, suffix);
1616 }
1617 
1618 static int wacom_parse_and_register(struct wacom *wacom, bool wireless)
1619 {
1620 	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
1621 	struct wacom_features *features = &wacom_wac->features;
1622 	struct hid_device *hdev = wacom->hdev;
1623 	int error;
1624 	unsigned int connect_mask = HID_CONNECT_HIDRAW;
1625 
1626 	features->pktlen = wacom_compute_pktlen(hdev);
1627 	if (features->pktlen > WACOM_PKGLEN_MAX)
1628 		return -EINVAL;
1629 
1630 	error = wacom_allocate_inputs(wacom);
1631 	if (error)
1632 		return error;
1633 
1634 	/*
1635 	 * Bamboo Pad has a generic hid handling for the Pen, and we switch it
1636 	 * into debug mode for the touch part.
1637 	 * We ignore the other interfaces.
1638 	 */
1639 	if (features->type == BAMBOO_PAD) {
1640 		if (features->pktlen == WACOM_PKGLEN_PENABLED) {
1641 			features->type = HID_GENERIC;
1642 		} else if ((features->pktlen != WACOM_PKGLEN_BPAD_TOUCH) &&
1643 			   (features->pktlen != WACOM_PKGLEN_BPAD_TOUCH_USB)) {
1644 			error = -ENODEV;
1645 			goto fail_allocate_inputs;
1646 		}
1647 	}
1648 
1649 	/* set the default size in case we do not get them from hid */
1650 	wacom_set_default_phy(features);
1651 
1652 	/* Retrieve the physical and logical size for touch devices */
1653 	wacom_retrieve_hid_descriptor(hdev, features);
1654 	wacom_setup_device_quirks(wacom);
1655 
1656 	if (features->device_type == WACOM_DEVICETYPE_NONE &&
1657 	    features->type != WIRELESS) {
1658 		error = features->type == HID_GENERIC ? -ENODEV : 0;
1659 
1660 		dev_warn(&hdev->dev, "Unknown device_type for '%s'. %s.",
1661 			 hdev->name,
1662 			 error ? "Ignoring" : "Assuming pen");
1663 
1664 		if (error)
1665 			goto fail_parsed;
1666 
1667 		features->device_type |= WACOM_DEVICETYPE_PEN;
1668 	}
1669 
1670 	wacom_calculate_res(features);
1671 
1672 	wacom_update_name(wacom, wireless ? " (WL)" : "");
1673 
1674 	error = wacom_add_shared_data(hdev);
1675 	if (error)
1676 		goto fail_shared_data;
1677 
1678 	if (!(features->device_type & WACOM_DEVICETYPE_WL_MONITOR) &&
1679 	     (features->quirks & WACOM_QUIRK_BATTERY)) {
1680 		error = wacom_initialize_battery(wacom);
1681 		if (error)
1682 			goto fail_battery;
1683 	}
1684 
1685 	error = wacom_register_inputs(wacom);
1686 	if (error)
1687 		goto fail_register_inputs;
1688 
1689 	if (features->type == HID_GENERIC)
1690 		connect_mask |= HID_CONNECT_DRIVER;
1691 
1692 	/* Regular HID work starts now */
1693 	error = hid_hw_start(hdev, connect_mask);
1694 	if (error) {
1695 		hid_err(hdev, "hw start failed\n");
1696 		goto fail_hw_start;
1697 	}
1698 
1699 	if (!wireless) {
1700 		/* Note that if query fails it is not a hard failure */
1701 		wacom_query_tablet_data(hdev, features);
1702 	}
1703 
1704 	/* touch only Bamboo doesn't support pen */
1705 	if ((features->type == BAMBOO_TOUCH) &&
1706 	    (features->device_type & WACOM_DEVICETYPE_PEN)) {
1707 		error = -ENODEV;
1708 		goto fail_hw_start;
1709 	}
1710 
1711 	/* pen only Bamboo neither support touch nor pad */
1712 	if ((features->type == BAMBOO_PEN) &&
1713 	    ((features->device_type & WACOM_DEVICETYPE_TOUCH) ||
1714 	    (features->device_type & WACOM_DEVICETYPE_PAD))) {
1715 		error = -ENODEV;
1716 		goto fail_hw_start;
1717 	}
1718 
1719 	if (features->device_type & WACOM_DEVICETYPE_WL_MONITOR)
1720 		error = hid_hw_open(hdev);
1721 
1722 	if ((wacom_wac->features.type == INTUOSHT ||
1723 	    wacom_wac->features.type == INTUOSHT2) &&
1724 	    (wacom_wac->features.device_type & WACOM_DEVICETYPE_TOUCH)) {
1725 			wacom_wac->shared->touch_input = wacom_wac->touch_input;
1726 	}
1727 
1728 	return 0;
1729 
1730 fail_hw_start:
1731 	hid_hw_stop(hdev);
1732 fail_register_inputs:
1733 	wacom_clean_inputs(wacom);
1734 	wacom_destroy_battery(wacom);
1735 fail_battery:
1736 	wacom_remove_shared_data(wacom);
1737 fail_shared_data:
1738 fail_parsed:
1739 fail_allocate_inputs:
1740 	wacom_clean_inputs(wacom);
1741 	return error;
1742 }
1743 
1744 static void wacom_wireless_work(struct work_struct *work)
1745 {
1746 	struct wacom *wacom = container_of(work, struct wacom, work);
1747 	struct usb_device *usbdev = wacom->usbdev;
1748 	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
1749 	struct hid_device *hdev1, *hdev2;
1750 	struct wacom *wacom1, *wacom2;
1751 	struct wacom_wac *wacom_wac1, *wacom_wac2;
1752 	int error;
1753 
1754 	/*
1755 	 * Regardless if this is a disconnect or a new tablet,
1756 	 * remove any existing input and battery devices.
1757 	 */
1758 
1759 	wacom_destroy_battery(wacom);
1760 
1761 	/* Stylus interface */
1762 	hdev1 = usb_get_intfdata(usbdev->config->interface[1]);
1763 	wacom1 = hid_get_drvdata(hdev1);
1764 	wacom_wac1 = &(wacom1->wacom_wac);
1765 	wacom_clean_inputs(wacom1);
1766 
1767 	/* Touch interface */
1768 	hdev2 = usb_get_intfdata(usbdev->config->interface[2]);
1769 	wacom2 = hid_get_drvdata(hdev2);
1770 	wacom_wac2 = &(wacom2->wacom_wac);
1771 	wacom_clean_inputs(wacom2);
1772 
1773 	if (wacom_wac->pid == 0) {
1774 		hid_info(wacom->hdev, "wireless tablet disconnected\n");
1775 		wacom_wac1->shared->type = 0;
1776 	} else {
1777 		const struct hid_device_id *id = wacom_ids;
1778 
1779 		hid_info(wacom->hdev, "wireless tablet connected with PID %x\n",
1780 			 wacom_wac->pid);
1781 
1782 		while (id->bus) {
1783 			if (id->vendor == USB_VENDOR_ID_WACOM &&
1784 			    id->product == wacom_wac->pid)
1785 				break;
1786 			id++;
1787 		}
1788 
1789 		if (!id->bus) {
1790 			hid_info(wacom->hdev, "ignoring unknown PID.\n");
1791 			return;
1792 		}
1793 
1794 		/* Stylus interface */
1795 		wacom_wac1->features =
1796 			*((struct wacom_features *)id->driver_data);
1797 
1798 		wacom_wac1->pid = wacom_wac->pid;
1799 		hid_hw_stop(hdev1);
1800 		error = wacom_parse_and_register(wacom1, true);
1801 		if (error)
1802 			goto fail;
1803 
1804 		/* Touch interface */
1805 		if (wacom_wac1->features.touch_max ||
1806 		    (wacom_wac1->features.type >= INTUOSHT &&
1807 		    wacom_wac1->features.type <= BAMBOO_PT)) {
1808 			wacom_wac2->features =
1809 				*((struct wacom_features *)id->driver_data);
1810 			wacom_wac2->pid = wacom_wac->pid;
1811 			hid_hw_stop(hdev2);
1812 			error = wacom_parse_and_register(wacom2, true);
1813 			if (error)
1814 				goto fail;
1815 		}
1816 
1817 		error = wacom_initialize_battery(wacom);
1818 		if (error)
1819 			goto fail;
1820 	}
1821 
1822 	return;
1823 
1824 fail:
1825 	wacom_clean_inputs(wacom1);
1826 	wacom_clean_inputs(wacom2);
1827 	return;
1828 }
1829 
1830 static int wacom_probe(struct hid_device *hdev,
1831 		const struct hid_device_id *id)
1832 {
1833 	struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
1834 	struct usb_device *dev = interface_to_usbdev(intf);
1835 	struct wacom *wacom;
1836 	struct wacom_wac *wacom_wac;
1837 	struct wacom_features *features;
1838 	int error;
1839 
1840 	if (!id->driver_data)
1841 		return -EINVAL;
1842 
1843 	hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS;
1844 
1845 	/* hid-core sets this quirk for the boot interface */
1846 	hdev->quirks &= ~HID_QUIRK_NOGET;
1847 
1848 	wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
1849 	if (!wacom)
1850 		return -ENOMEM;
1851 
1852 	hid_set_drvdata(hdev, wacom);
1853 	wacom->hdev = hdev;
1854 
1855 	wacom_wac = &wacom->wacom_wac;
1856 	wacom_wac->features = *((struct wacom_features *)id->driver_data);
1857 	features = &wacom_wac->features;
1858 
1859 	if (features->check_for_hid_type && features->hid_type != hdev->type) {
1860 		error = -ENODEV;
1861 		goto fail_type;
1862 	}
1863 
1864 	wacom_wac->hid_data.inputmode = -1;
1865 	wacom_wac->mode_report = -1;
1866 
1867 	wacom->usbdev = dev;
1868 	wacom->intf = intf;
1869 	mutex_init(&wacom->lock);
1870 	INIT_WORK(&wacom->work, wacom_wireless_work);
1871 
1872 	/* ask for the report descriptor to be loaded by HID */
1873 	error = hid_parse(hdev);
1874 	if (error) {
1875 		hid_err(hdev, "parse failed\n");
1876 		goto fail_parse;
1877 	}
1878 
1879 	error = wacom_parse_and_register(wacom, false);
1880 	if (error)
1881 		goto fail_parse;
1882 
1883 	if (hdev->bus == BUS_BLUETOOTH) {
1884 		error = device_create_file(&hdev->dev, &dev_attr_speed);
1885 		if (error)
1886 			hid_warn(hdev,
1887 				 "can't create sysfs speed attribute err: %d\n",
1888 				 error);
1889 	}
1890 
1891 	return 0;
1892 
1893 fail_type:
1894 fail_parse:
1895 	kfree(wacom);
1896 	hid_set_drvdata(hdev, NULL);
1897 	return error;
1898 }
1899 
1900 static void wacom_remove(struct hid_device *hdev)
1901 {
1902 	struct wacom *wacom = hid_get_drvdata(hdev);
1903 	struct wacom_wac *wacom_wac = &wacom->wacom_wac;
1904 	struct wacom_features *features = &wacom_wac->features;
1905 
1906 	if (features->device_type & WACOM_DEVICETYPE_WL_MONITOR)
1907 		hid_hw_close(hdev);
1908 
1909 	hid_hw_stop(hdev);
1910 
1911 	cancel_work_sync(&wacom->work);
1912 	wacom_clean_inputs(wacom);
1913 	if (hdev->bus == BUS_BLUETOOTH)
1914 		device_remove_file(&hdev->dev, &dev_attr_speed);
1915 	wacom_destroy_battery(wacom);
1916 	wacom_remove_shared_data(wacom);
1917 
1918 	hid_set_drvdata(hdev, NULL);
1919 	kfree(wacom);
1920 }
1921 
1922 #ifdef CONFIG_PM
1923 static int wacom_resume(struct hid_device *hdev)
1924 {
1925 	struct wacom *wacom = hid_get_drvdata(hdev);
1926 	struct wacom_features *features = &wacom->wacom_wac.features;
1927 
1928 	mutex_lock(&wacom->lock);
1929 
1930 	/* switch to wacom mode first */
1931 	wacom_query_tablet_data(hdev, features);
1932 	wacom_led_control(wacom);
1933 
1934 	mutex_unlock(&wacom->lock);
1935 
1936 	return 0;
1937 }
1938 
1939 static int wacom_reset_resume(struct hid_device *hdev)
1940 {
1941 	return wacom_resume(hdev);
1942 }
1943 #endif /* CONFIG_PM */
1944 
1945 static struct hid_driver wacom_driver = {
1946 	.name =		"wacom",
1947 	.id_table =	wacom_ids,
1948 	.probe =	wacom_probe,
1949 	.remove =	wacom_remove,
1950 	.report =	wacom_wac_report,
1951 #ifdef CONFIG_PM
1952 	.resume =	wacom_resume,
1953 	.reset_resume =	wacom_reset_resume,
1954 #endif
1955 	.raw_event =	wacom_raw_event,
1956 };
1957 module_hid_driver(wacom_driver);
1958 
1959 MODULE_VERSION(DRIVER_VERSION);
1960 MODULE_AUTHOR(DRIVER_AUTHOR);
1961 MODULE_DESCRIPTION(DRIVER_DESC);
1962 MODULE_LICENSE(DRIVER_LICENSE);
1963