1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  *  HID driver for UC-Logic devices not fully compliant with HID standard
4  *
5  *  Copyright (c) 2010-2014 Nikolai Kondrashov
6  *  Copyright (c) 2013 Martin Rusko
7  */
8 
9 /*
10  * This program is free software; you can redistribute it and/or modify it
11  * under the terms of the GNU General Public License as published by the Free
12  * Software Foundation; either version 2 of the License, or (at your option)
13  * any later version.
14  */
15 
16 #include <linux/device.h>
17 #include <linux/hid.h>
18 #include <linux/module.h>
19 #include <linux/timer.h>
20 #include "usbhid/usbhid.h"
21 #include "hid-uclogic-params.h"
22 
23 #include "hid-ids.h"
24 
25 /* Driver data */
26 struct uclogic_drvdata {
27 	/* Interface parameters */
28 	struct uclogic_params params;
29 	/* Pointer to the replacement report descriptor. NULL if none. */
30 	__u8 *desc_ptr;
31 	/*
32 	 * Size of the replacement report descriptor.
33 	 * Only valid if desc_ptr is not NULL
34 	 */
35 	unsigned int desc_size;
36 	/* Pen input device */
37 	struct input_dev *pen_input;
38 	/* In-range timer */
39 	struct timer_list inrange_timer;
40 	/* Last rotary encoder state, or U8_MAX for none */
41 	u8 re_state;
42 };
43 
44 /**
45  * uclogic_inrange_timeout - handle pen in-range state timeout.
46  * Emulate input events normally generated when pen goes out of range for
47  * tablets which don't report that.
48  *
49  * @t:	The timer the timeout handler is attached to, stored in a struct
50  *	uclogic_drvdata.
51  */
52 static void uclogic_inrange_timeout(struct timer_list *t)
53 {
54 	struct uclogic_drvdata *drvdata = from_timer(drvdata, t,
55 							inrange_timer);
56 	struct input_dev *input = drvdata->pen_input;
57 
58 	if (input == NULL)
59 		return;
60 	input_report_abs(input, ABS_PRESSURE, 0);
61 	/* If BTN_TOUCH state is changing */
62 	if (test_bit(BTN_TOUCH, input->key)) {
63 		input_event(input, EV_MSC, MSC_SCAN,
64 				/* Digitizer Tip Switch usage */
65 				0xd0042);
66 		input_report_key(input, BTN_TOUCH, 0);
67 	}
68 	input_report_key(input, BTN_TOOL_PEN, 0);
69 	input_sync(input);
70 }
71 
72 static __u8 *uclogic_report_fixup(struct hid_device *hdev, __u8 *rdesc,
73 					unsigned int *rsize)
74 {
75 	struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev);
76 
77 	if (drvdata->desc_ptr != NULL) {
78 		rdesc = drvdata->desc_ptr;
79 		*rsize = drvdata->desc_size;
80 	}
81 	return rdesc;
82 }
83 
84 static int uclogic_input_mapping(struct hid_device *hdev,
85 				 struct hid_input *hi,
86 				 struct hid_field *field,
87 				 struct hid_usage *usage,
88 				 unsigned long **bit,
89 				 int *max)
90 {
91 	struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev);
92 	struct uclogic_params *params = &drvdata->params;
93 
94 	/* discard the unused pen interface */
95 	if (params->pen_unused && (field->application == HID_DG_PEN))
96 		return -1;
97 
98 	/* let hid-core decide what to do */
99 	return 0;
100 }
101 
102 static int uclogic_input_configured(struct hid_device *hdev,
103 		struct hid_input *hi)
104 {
105 	struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev);
106 	struct uclogic_params *params = &drvdata->params;
107 	char *name;
108 	const char *suffix = NULL;
109 	struct hid_field *field;
110 	size_t len;
111 
112 	/* no report associated (HID_QUIRK_MULTI_INPUT not set) */
113 	if (!hi->report)
114 		return 0;
115 
116 	/*
117 	 * If this is the input corresponding to the pen report
118 	 * in need of tweaking.
119 	 */
120 	if (hi->report->id == params->pen.id) {
121 		/* Remember the input device so we can simulate events */
122 		drvdata->pen_input = hi->input;
123 	}
124 
125 	field = hi->report->field[0];
126 
127 	switch (field->application) {
128 	case HID_GD_KEYBOARD:
129 		suffix = "Keyboard";
130 		break;
131 	case HID_GD_MOUSE:
132 		suffix = "Mouse";
133 		break;
134 	case HID_GD_KEYPAD:
135 		suffix = "Pad";
136 		break;
137 	case HID_DG_PEN:
138 		suffix = "Pen";
139 		break;
140 	case HID_CP_CONSUMER_CONTROL:
141 		suffix = "Consumer Control";
142 		break;
143 	case HID_GD_SYSTEM_CONTROL:
144 		suffix = "System Control";
145 		break;
146 	}
147 
148 	if (suffix) {
149 		len = strlen(hdev->name) + 2 + strlen(suffix);
150 		name = devm_kzalloc(&hi->input->dev, len, GFP_KERNEL);
151 		if (name) {
152 			snprintf(name, len, "%s %s", hdev->name, suffix);
153 			hi->input->name = name;
154 		}
155 	}
156 
157 	return 0;
158 }
159 
160 static int uclogic_probe(struct hid_device *hdev,
161 		const struct hid_device_id *id)
162 {
163 	int rc;
164 	struct uclogic_drvdata *drvdata = NULL;
165 	bool params_initialized = false;
166 
167 	/*
168 	 * libinput requires the pad interface to be on a different node
169 	 * than the pen, so use QUIRK_MULTI_INPUT for all tablets.
170 	 */
171 	hdev->quirks |= HID_QUIRK_MULTI_INPUT;
172 
173 	/* Allocate and assign driver data */
174 	drvdata = devm_kzalloc(&hdev->dev, sizeof(*drvdata), GFP_KERNEL);
175 	if (drvdata == NULL) {
176 		rc = -ENOMEM;
177 		goto failure;
178 	}
179 	timer_setup(&drvdata->inrange_timer, uclogic_inrange_timeout, 0);
180 	drvdata->re_state = U8_MAX;
181 	hid_set_drvdata(hdev, drvdata);
182 
183 	/* Initialize the device and retrieve interface parameters */
184 	rc = uclogic_params_init(&drvdata->params, hdev);
185 	if (rc != 0) {
186 		hid_err(hdev, "failed probing parameters: %d\n", rc);
187 		goto failure;
188 	}
189 	params_initialized = true;
190 	hid_dbg(hdev, "parameters:\n" UCLOGIC_PARAMS_FMT_STR,
191 		UCLOGIC_PARAMS_FMT_ARGS(&drvdata->params));
192 	if (drvdata->params.invalid) {
193 		hid_info(hdev, "interface is invalid, ignoring\n");
194 		rc = -ENODEV;
195 		goto failure;
196 	}
197 
198 	/* Generate replacement report descriptor */
199 	rc = uclogic_params_get_desc(&drvdata->params,
200 				     &drvdata->desc_ptr,
201 				     &drvdata->desc_size);
202 	if (rc) {
203 		hid_err(hdev,
204 			"failed generating replacement report descriptor: %d\n",
205 			rc);
206 		goto failure;
207 	}
208 
209 	rc = hid_parse(hdev);
210 	if (rc) {
211 		hid_err(hdev, "parse failed\n");
212 		goto failure;
213 	}
214 
215 	rc = hid_hw_start(hdev, HID_CONNECT_DEFAULT);
216 	if (rc) {
217 		hid_err(hdev, "hw start failed\n");
218 		goto failure;
219 	}
220 
221 	return 0;
222 failure:
223 	/* Assume "remove" might not be called if "probe" failed */
224 	if (params_initialized)
225 		uclogic_params_cleanup(&drvdata->params);
226 	return rc;
227 }
228 
229 #ifdef CONFIG_PM
230 static int uclogic_resume(struct hid_device *hdev)
231 {
232 	int rc;
233 	struct uclogic_params params;
234 
235 	/* Re-initialize the device, but discard parameters */
236 	rc = uclogic_params_init(&params, hdev);
237 	if (rc != 0)
238 		hid_err(hdev, "failed to re-initialize the device\n");
239 	else
240 		uclogic_params_cleanup(&params);
241 
242 	return rc;
243 }
244 #endif
245 
246 static int uclogic_raw_event(struct hid_device *hdev,
247 				struct hid_report *report,
248 				u8 *data, int size)
249 {
250 	struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev);
251 	struct uclogic_params *params = &drvdata->params;
252 
253 	/* Tweak pen reports, if necessary */
254 	if (!params->pen_unused &&
255 	    (report->type == HID_INPUT_REPORT) &&
256 	    (report->id == params->pen.id) &&
257 	    (size >= 2)) {
258 		/* If it's the "virtual" frame controls report */
259 		if (params->frame.id != 0 &&
260 		    data[1] & params->pen_frame_flag) {
261 			/* Change to virtual frame controls report ID */
262 			data[0] = params->frame.id;
263 			return 0;
264 		}
265 		/* If in-range reports are inverted */
266 		if (params->pen.inrange ==
267 			UCLOGIC_PARAMS_PEN_INRANGE_INVERTED) {
268 			/* Invert the in-range bit */
269 			data[1] ^= 0x40;
270 		}
271 		/*
272 		 * If report contains fragmented high-resolution pen
273 		 * coordinates
274 		 */
275 		if (size >= 10 && params->pen.fragmented_hires) {
276 			u8 pressure_low_byte;
277 			u8 pressure_high_byte;
278 
279 			/* Lift pressure bytes */
280 			pressure_low_byte = data[6];
281 			pressure_high_byte = data[7];
282 			/*
283 			 * Move Y coord to make space for high-order X
284 			 * coord byte
285 			 */
286 			data[6] = data[5];
287 			data[5] = data[4];
288 			/* Move high-order X coord byte */
289 			data[4] = data[8];
290 			/* Move high-order Y coord byte */
291 			data[7] = data[9];
292 			/* Place pressure bytes */
293 			data[8] = pressure_low_byte;
294 			data[9] = pressure_high_byte;
295 		}
296 		/* If we need to emulate in-range detection */
297 		if (params->pen.inrange == UCLOGIC_PARAMS_PEN_INRANGE_NONE) {
298 			/* Set in-range bit */
299 			data[1] |= 0x40;
300 			/* (Re-)start in-range timeout */
301 			mod_timer(&drvdata->inrange_timer,
302 					jiffies + msecs_to_jiffies(100));
303 		}
304 	}
305 
306 	/* Tweak frame control reports, if necessary */
307 	if ((report->type == HID_INPUT_REPORT) &&
308 	    (report->id == params->frame.id)) {
309 		/* If need to, and can, set pad device ID for Wacom drivers */
310 		if (params->frame.dev_id_byte > 0 &&
311 		    params->frame.dev_id_byte < size) {
312 			data[params->frame.dev_id_byte] = 0xf;
313 		}
314 		/* If need to, and can, read rotary encoder state change */
315 		if (params->frame.re_lsb > 0 &&
316 		    params->frame.re_lsb / 8 < size) {
317 			unsigned int byte = params->frame.re_lsb / 8;
318 			unsigned int bit = params->frame.re_lsb % 8;
319 
320 			u8 change;
321 			u8 prev_state = drvdata->re_state;
322 			/* Read Gray-coded state */
323 			u8 state = (data[byte] >> bit) & 0x3;
324 			/* Encode state change into 2-bit signed integer */
325 			if ((prev_state == 1 && state == 0) ||
326 			    (prev_state == 2 && state == 3)) {
327 				change = 1;
328 			} else if ((prev_state == 2 && state == 0) ||
329 				   (prev_state == 1 && state == 3)) {
330 				change = 3;
331 			} else {
332 				change = 0;
333 			}
334 			/* Write change */
335 			data[byte] = (data[byte] & ~((u8)3 << bit)) |
336 					(change << bit);
337 			/* Remember state */
338 			drvdata->re_state = state;
339 		}
340 	}
341 
342 	return 0;
343 }
344 
345 static void uclogic_remove(struct hid_device *hdev)
346 {
347 	struct uclogic_drvdata *drvdata = hid_get_drvdata(hdev);
348 
349 	del_timer_sync(&drvdata->inrange_timer);
350 	hid_hw_stop(hdev);
351 	kfree(drvdata->desc_ptr);
352 	uclogic_params_cleanup(&drvdata->params);
353 }
354 
355 static const struct hid_device_id uclogic_devices[] = {
356 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
357 				USB_DEVICE_ID_UCLOGIC_TABLET_PF1209) },
358 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
359 				USB_DEVICE_ID_UCLOGIC_TABLET_WP4030U) },
360 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
361 				USB_DEVICE_ID_UCLOGIC_TABLET_WP5540U) },
362 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
363 				USB_DEVICE_ID_UCLOGIC_TABLET_WP8060U) },
364 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
365 				USB_DEVICE_ID_UCLOGIC_TABLET_WP1062) },
366 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
367 				USB_DEVICE_ID_UCLOGIC_WIRELESS_TABLET_TWHL850) },
368 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
369 				USB_DEVICE_ID_UCLOGIC_TABLET_TWHA60) },
370 	{ HID_USB_DEVICE(USB_VENDOR_ID_HUION,
371 				USB_DEVICE_ID_HUION_TABLET) },
372 	{ HID_USB_DEVICE(USB_VENDOR_ID_HUION,
373 				USB_DEVICE_ID_HUION_HS64) },
374 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
375 				USB_DEVICE_ID_HUION_TABLET) },
376 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
377 				USB_DEVICE_ID_YIYNOVA_TABLET) },
378 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
379 				USB_DEVICE_ID_UCLOGIC_UGEE_TABLET_81) },
380 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
381 				USB_DEVICE_ID_UCLOGIC_UGEE_TABLET_45) },
382 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
383 				USB_DEVICE_ID_UCLOGIC_UGEE_TABLET_47) },
384 	{ HID_USB_DEVICE(USB_VENDOR_ID_UCLOGIC,
385 				USB_DEVICE_ID_UCLOGIC_DRAWIMAGE_G3) },
386 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGTIZER,
387 				USB_DEVICE_ID_UGTIZER_TABLET_GP0610) },
388 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
389 				USB_DEVICE_ID_UGEE_TABLET_G5) },
390 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
391 				USB_DEVICE_ID_UGEE_TABLET_EX07S) },
392 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
393 				USB_DEVICE_ID_UGEE_TABLET_RAINBOW_CV720) },
394 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
395 				USB_DEVICE_ID_UGEE_XPPEN_TABLET_G540) },
396 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
397 				USB_DEVICE_ID_UGEE_XPPEN_TABLET_G640) },
398 	{ HID_USB_DEVICE(USB_VENDOR_ID_UGEE,
399 				USB_DEVICE_ID_UGEE_XPPEN_TABLET_DECO01) },
400 	{ }
401 };
402 MODULE_DEVICE_TABLE(hid, uclogic_devices);
403 
404 static struct hid_driver uclogic_driver = {
405 	.name = "uclogic",
406 	.id_table = uclogic_devices,
407 	.probe = uclogic_probe,
408 	.remove = uclogic_remove,
409 	.report_fixup = uclogic_report_fixup,
410 	.raw_event = uclogic_raw_event,
411 	.input_mapping = uclogic_input_mapping,
412 	.input_configured = uclogic_input_configured,
413 #ifdef CONFIG_PM
414 	.resume	          = uclogic_resume,
415 	.reset_resume     = uclogic_resume,
416 #endif
417 };
418 module_hid_driver(uclogic_driver);
419 
420 MODULE_AUTHOR("Martin Rusko");
421 MODULE_AUTHOR("Nikolai Kondrashov");
422 MODULE_LICENSE("GPL");
423