1 /* 2 * Copyright (c) 2013 Andrew Duggan <aduggan@synaptics.com> 3 * Copyright (c) 2013 Synaptics Incorporated 4 * Copyright (c) 2014 Benjamin Tissoires <benjamin.tissoires@gmail.com> 5 * Copyright (c) 2014 Red Hat, Inc 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License as published by the Free 9 * Software Foundation; either version 2 of the License, or (at your option) 10 * any later version. 11 */ 12 13 #include <linux/kernel.h> 14 #include <linux/hid.h> 15 #include <linux/input.h> 16 #include <linux/input/mt.h> 17 #include <linux/irq.h> 18 #include <linux/irqdomain.h> 19 #include <linux/module.h> 20 #include <linux/pm.h> 21 #include <linux/slab.h> 22 #include <linux/wait.h> 23 #include <linux/sched.h> 24 #include <linux/rmi.h> 25 #include "hid-ids.h" 26 27 #define RMI_MOUSE_REPORT_ID 0x01 /* Mouse emulation Report */ 28 #define RMI_WRITE_REPORT_ID 0x09 /* Output Report */ 29 #define RMI_READ_ADDR_REPORT_ID 0x0a /* Output Report */ 30 #define RMI_READ_DATA_REPORT_ID 0x0b /* Input Report */ 31 #define RMI_ATTN_REPORT_ID 0x0c /* Input Report */ 32 #define RMI_SET_RMI_MODE_REPORT_ID 0x0f /* Feature Report */ 33 34 /* flags */ 35 #define RMI_READ_REQUEST_PENDING 0 36 #define RMI_READ_DATA_PENDING 1 37 #define RMI_STARTED 2 38 39 /* device flags */ 40 #define RMI_DEVICE BIT(0) 41 #define RMI_DEVICE_HAS_PHYS_BUTTONS BIT(1) 42 43 /* 44 * retrieve the ctrl registers 45 * the ctrl register has a size of 20 but a fw bug split it into 16 + 4, 46 * and there is no way to know if the first 20 bytes are here or not. 47 * We use only the first 12 bytes, so get only them. 48 */ 49 #define RMI_F11_CTRL_REG_COUNT 12 50 51 enum rmi_mode_type { 52 RMI_MODE_OFF = 0, 53 RMI_MODE_ATTN_REPORTS = 1, 54 RMI_MODE_NO_PACKED_ATTN_REPORTS = 2, 55 }; 56 57 /** 58 * struct rmi_data - stores information for hid communication 59 * 60 * @page_mutex: Locks current page to avoid changing pages in unexpected ways. 61 * @page: Keeps track of the current virtual page 62 * @xport: transport device to be registered with the RMI4 core. 63 * 64 * @wait: Used for waiting for read data 65 * 66 * @writeReport: output buffer when writing RMI registers 67 * @readReport: input buffer when reading RMI registers 68 * 69 * @input_report_size: size of an input report (advertised by HID) 70 * @output_report_size: size of an output report (advertised by HID) 71 * 72 * @flags: flags for the current device (started, reading, etc...) 73 * 74 * @reset_work: worker which will be called in case of a mouse report 75 * @hdev: pointer to the struct hid_device 76 * 77 * @device_flags: flags which describe the device 78 * 79 * @domain: the IRQ domain allocated for this RMI4 device 80 * @rmi_irq: the irq that will be used to generate events to rmi-core 81 */ 82 struct rmi_data { 83 struct mutex page_mutex; 84 int page; 85 struct rmi_transport_dev xport; 86 87 wait_queue_head_t wait; 88 89 u8 *writeReport; 90 u8 *readReport; 91 92 int input_report_size; 93 int output_report_size; 94 95 unsigned long flags; 96 97 struct work_struct reset_work; 98 struct hid_device *hdev; 99 100 unsigned long device_flags; 101 102 struct irq_domain *domain; 103 int rmi_irq; 104 }; 105 106 #define RMI_PAGE(addr) (((addr) >> 8) & 0xff) 107 108 static int rmi_write_report(struct hid_device *hdev, u8 *report, int len); 109 110 /** 111 * rmi_set_page - Set RMI page 112 * @hdev: The pointer to the hid_device struct 113 * @page: The new page address. 114 * 115 * RMI devices have 16-bit addressing, but some of the physical 116 * implementations (like SMBus) only have 8-bit addressing. So RMI implements 117 * a page address at 0xff of every page so we can reliable page addresses 118 * every 256 registers. 119 * 120 * The page_mutex lock must be held when this function is entered. 121 * 122 * Returns zero on success, non-zero on failure. 123 */ 124 static int rmi_set_page(struct hid_device *hdev, u8 page) 125 { 126 struct rmi_data *data = hid_get_drvdata(hdev); 127 int retval; 128 129 data->writeReport[0] = RMI_WRITE_REPORT_ID; 130 data->writeReport[1] = 1; 131 data->writeReport[2] = 0xFF; 132 data->writeReport[4] = page; 133 134 retval = rmi_write_report(hdev, data->writeReport, 135 data->output_report_size); 136 if (retval != data->output_report_size) { 137 dev_err(&hdev->dev, 138 "%s: set page failed: %d.", __func__, retval); 139 return retval; 140 } 141 142 data->page = page; 143 return 0; 144 } 145 146 static int rmi_set_mode(struct hid_device *hdev, u8 mode) 147 { 148 int ret; 149 const u8 txbuf[2] = {RMI_SET_RMI_MODE_REPORT_ID, mode}; 150 u8 *buf; 151 152 buf = kmemdup(txbuf, sizeof(txbuf), GFP_KERNEL); 153 if (!buf) 154 return -ENOMEM; 155 156 ret = hid_hw_raw_request(hdev, RMI_SET_RMI_MODE_REPORT_ID, buf, 157 sizeof(txbuf), HID_FEATURE_REPORT, HID_REQ_SET_REPORT); 158 kfree(buf); 159 if (ret < 0) { 160 dev_err(&hdev->dev, "unable to set rmi mode to %d (%d)\n", mode, 161 ret); 162 return ret; 163 } 164 165 return 0; 166 } 167 168 static int rmi_write_report(struct hid_device *hdev, u8 *report, int len) 169 { 170 int ret; 171 172 ret = hid_hw_output_report(hdev, (void *)report, len); 173 if (ret < 0) { 174 dev_err(&hdev->dev, "failed to write hid report (%d)\n", ret); 175 return ret; 176 } 177 178 return ret; 179 } 180 181 static int rmi_hid_read_block(struct rmi_transport_dev *xport, u16 addr, 182 void *buf, size_t len) 183 { 184 struct rmi_data *data = container_of(xport, struct rmi_data, xport); 185 struct hid_device *hdev = data->hdev; 186 int ret; 187 int bytes_read; 188 int bytes_needed; 189 int retries; 190 int read_input_count; 191 192 mutex_lock(&data->page_mutex); 193 194 if (RMI_PAGE(addr) != data->page) { 195 ret = rmi_set_page(hdev, RMI_PAGE(addr)); 196 if (ret < 0) 197 goto exit; 198 } 199 200 for (retries = 5; retries > 0; retries--) { 201 data->writeReport[0] = RMI_READ_ADDR_REPORT_ID; 202 data->writeReport[1] = 0; /* old 1 byte read count */ 203 data->writeReport[2] = addr & 0xFF; 204 data->writeReport[3] = (addr >> 8) & 0xFF; 205 data->writeReport[4] = len & 0xFF; 206 data->writeReport[5] = (len >> 8) & 0xFF; 207 208 set_bit(RMI_READ_REQUEST_PENDING, &data->flags); 209 210 ret = rmi_write_report(hdev, data->writeReport, 211 data->output_report_size); 212 if (ret != data->output_report_size) { 213 clear_bit(RMI_READ_REQUEST_PENDING, &data->flags); 214 dev_err(&hdev->dev, 215 "failed to write request output report (%d)\n", 216 ret); 217 goto exit; 218 } 219 220 bytes_read = 0; 221 bytes_needed = len; 222 while (bytes_read < len) { 223 if (!wait_event_timeout(data->wait, 224 test_bit(RMI_READ_DATA_PENDING, &data->flags), 225 msecs_to_jiffies(1000))) { 226 hid_warn(hdev, "%s: timeout elapsed\n", 227 __func__); 228 ret = -EAGAIN; 229 break; 230 } 231 232 read_input_count = data->readReport[1]; 233 memcpy(buf + bytes_read, &data->readReport[2], 234 read_input_count < bytes_needed ? 235 read_input_count : bytes_needed); 236 237 bytes_read += read_input_count; 238 bytes_needed -= read_input_count; 239 clear_bit(RMI_READ_DATA_PENDING, &data->flags); 240 } 241 242 if (ret >= 0) { 243 ret = 0; 244 break; 245 } 246 } 247 248 exit: 249 clear_bit(RMI_READ_REQUEST_PENDING, &data->flags); 250 mutex_unlock(&data->page_mutex); 251 return ret; 252 } 253 254 static int rmi_hid_write_block(struct rmi_transport_dev *xport, u16 addr, 255 const void *buf, size_t len) 256 { 257 struct rmi_data *data = container_of(xport, struct rmi_data, xport); 258 struct hid_device *hdev = data->hdev; 259 int ret; 260 261 mutex_lock(&data->page_mutex); 262 263 if (RMI_PAGE(addr) != data->page) { 264 ret = rmi_set_page(hdev, RMI_PAGE(addr)); 265 if (ret < 0) 266 goto exit; 267 } 268 269 data->writeReport[0] = RMI_WRITE_REPORT_ID; 270 data->writeReport[1] = len; 271 data->writeReport[2] = addr & 0xFF; 272 data->writeReport[3] = (addr >> 8) & 0xFF; 273 memcpy(&data->writeReport[4], buf, len); 274 275 ret = rmi_write_report(hdev, data->writeReport, 276 data->output_report_size); 277 if (ret < 0) { 278 dev_err(&hdev->dev, 279 "failed to write request output report (%d)\n", 280 ret); 281 goto exit; 282 } 283 ret = 0; 284 285 exit: 286 mutex_unlock(&data->page_mutex); 287 return ret; 288 } 289 290 static int rmi_reset_attn_mode(struct hid_device *hdev) 291 { 292 struct rmi_data *data = hid_get_drvdata(hdev); 293 struct rmi_device *rmi_dev = data->xport.rmi_dev; 294 int ret; 295 296 ret = rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS); 297 if (ret) 298 return ret; 299 300 if (test_bit(RMI_STARTED, &data->flags)) 301 ret = rmi_dev->driver->reset_handler(rmi_dev); 302 303 return ret; 304 } 305 306 static void rmi_reset_work(struct work_struct *work) 307 { 308 struct rmi_data *hdata = container_of(work, struct rmi_data, 309 reset_work); 310 311 /* switch the device to RMI if we receive a generic mouse report */ 312 rmi_reset_attn_mode(hdata->hdev); 313 } 314 315 static int rmi_input_event(struct hid_device *hdev, u8 *data, int size) 316 { 317 struct rmi_data *hdata = hid_get_drvdata(hdev); 318 struct rmi_device *rmi_dev = hdata->xport.rmi_dev; 319 unsigned long flags; 320 321 if (!(test_bit(RMI_STARTED, &hdata->flags))) 322 return 0; 323 324 local_irq_save(flags); 325 326 rmi_set_attn_data(rmi_dev, data[1], &data[2], size - 2); 327 328 generic_handle_irq(hdata->rmi_irq); 329 330 local_irq_restore(flags); 331 332 return 1; 333 } 334 335 static int rmi_read_data_event(struct hid_device *hdev, u8 *data, int size) 336 { 337 struct rmi_data *hdata = hid_get_drvdata(hdev); 338 339 if (!test_bit(RMI_READ_REQUEST_PENDING, &hdata->flags)) { 340 hid_dbg(hdev, "no read request pending\n"); 341 return 0; 342 } 343 344 memcpy(hdata->readReport, data, size < hdata->input_report_size ? 345 size : hdata->input_report_size); 346 set_bit(RMI_READ_DATA_PENDING, &hdata->flags); 347 wake_up(&hdata->wait); 348 349 return 1; 350 } 351 352 static int rmi_check_sanity(struct hid_device *hdev, u8 *data, int size) 353 { 354 int valid_size = size; 355 /* 356 * On the Dell XPS 13 9333, the bus sometimes get confused and fills 357 * the report with a sentinel value "ff". Synaptics told us that such 358 * behavior does not comes from the touchpad itself, so we filter out 359 * such reports here. 360 */ 361 362 while ((data[valid_size - 1] == 0xff) && valid_size > 0) 363 valid_size--; 364 365 return valid_size; 366 } 367 368 static int rmi_raw_event(struct hid_device *hdev, 369 struct hid_report *report, u8 *data, int size) 370 { 371 size = rmi_check_sanity(hdev, data, size); 372 if (size < 2) 373 return 0; 374 375 switch (data[0]) { 376 case RMI_READ_DATA_REPORT_ID: 377 return rmi_read_data_event(hdev, data, size); 378 case RMI_ATTN_REPORT_ID: 379 return rmi_input_event(hdev, data, size); 380 default: 381 return 1; 382 } 383 384 return 0; 385 } 386 387 static int rmi_event(struct hid_device *hdev, struct hid_field *field, 388 struct hid_usage *usage, __s32 value) 389 { 390 struct rmi_data *data = hid_get_drvdata(hdev); 391 392 if ((data->device_flags & RMI_DEVICE) && 393 (field->application == HID_GD_POINTER || 394 field->application == HID_GD_MOUSE)) { 395 if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS) { 396 if ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON) 397 return 0; 398 399 if ((usage->hid == HID_GD_X || usage->hid == HID_GD_Y) 400 && !value) 401 return 1; 402 } 403 404 schedule_work(&data->reset_work); 405 return 1; 406 } 407 408 return 0; 409 } 410 411 #ifdef CONFIG_PM 412 static int rmi_suspend(struct hid_device *hdev, pm_message_t message) 413 { 414 struct rmi_data *data = hid_get_drvdata(hdev); 415 struct rmi_device *rmi_dev = data->xport.rmi_dev; 416 int ret; 417 418 if (!(data->device_flags & RMI_DEVICE)) 419 return 0; 420 421 ret = rmi_driver_suspend(rmi_dev, false); 422 if (ret) { 423 hid_warn(hdev, "Failed to suspend device: %d\n", ret); 424 return ret; 425 } 426 427 return 0; 428 } 429 430 static int rmi_post_resume(struct hid_device *hdev) 431 { 432 struct rmi_data *data = hid_get_drvdata(hdev); 433 struct rmi_device *rmi_dev = data->xport.rmi_dev; 434 int ret; 435 436 if (!(data->device_flags & RMI_DEVICE)) 437 return 0; 438 439 ret = rmi_reset_attn_mode(hdev); 440 if (ret) 441 return ret; 442 443 ret = rmi_driver_resume(rmi_dev, false); 444 if (ret) { 445 hid_warn(hdev, "Failed to resume device: %d\n", ret); 446 return ret; 447 } 448 449 return 0; 450 } 451 #endif /* CONFIG_PM */ 452 453 static int rmi_hid_reset(struct rmi_transport_dev *xport, u16 reset_addr) 454 { 455 struct rmi_data *data = container_of(xport, struct rmi_data, xport); 456 struct hid_device *hdev = data->hdev; 457 458 return rmi_reset_attn_mode(hdev); 459 } 460 461 static int rmi_input_configured(struct hid_device *hdev, struct hid_input *hi) 462 { 463 struct rmi_data *data = hid_get_drvdata(hdev); 464 struct input_dev *input = hi->input; 465 int ret = 0; 466 467 if (!(data->device_flags & RMI_DEVICE)) 468 return 0; 469 470 data->xport.input = input; 471 472 hid_dbg(hdev, "Opening low level driver\n"); 473 ret = hid_hw_open(hdev); 474 if (ret) 475 return ret; 476 477 /* Allow incoming hid reports */ 478 hid_device_io_start(hdev); 479 480 ret = rmi_set_mode(hdev, RMI_MODE_ATTN_REPORTS); 481 if (ret < 0) { 482 dev_err(&hdev->dev, "failed to set rmi mode\n"); 483 goto exit; 484 } 485 486 ret = rmi_set_page(hdev, 0); 487 if (ret < 0) { 488 dev_err(&hdev->dev, "failed to set page select to 0.\n"); 489 goto exit; 490 } 491 492 ret = rmi_register_transport_device(&data->xport); 493 if (ret < 0) { 494 dev_err(&hdev->dev, "failed to register transport driver\n"); 495 goto exit; 496 } 497 498 set_bit(RMI_STARTED, &data->flags); 499 500 exit: 501 hid_device_io_stop(hdev); 502 hid_hw_close(hdev); 503 return ret; 504 } 505 506 static int rmi_input_mapping(struct hid_device *hdev, 507 struct hid_input *hi, struct hid_field *field, 508 struct hid_usage *usage, unsigned long **bit, int *max) 509 { 510 struct rmi_data *data = hid_get_drvdata(hdev); 511 512 /* 513 * we want to make HID ignore the advertised HID collection 514 * for RMI deivces 515 */ 516 if (data->device_flags & RMI_DEVICE) { 517 if ((data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS) && 518 ((usage->hid & HID_USAGE_PAGE) == HID_UP_BUTTON)) 519 return 0; 520 521 return -1; 522 } 523 524 return 0; 525 } 526 527 static int rmi_check_valid_report_id(struct hid_device *hdev, unsigned type, 528 unsigned id, struct hid_report **report) 529 { 530 int i; 531 532 *report = hdev->report_enum[type].report_id_hash[id]; 533 if (*report) { 534 for (i = 0; i < (*report)->maxfield; i++) { 535 unsigned app = (*report)->field[i]->application; 536 if ((app & HID_USAGE_PAGE) >= HID_UP_MSVENDOR) 537 return 1; 538 } 539 } 540 541 return 0; 542 } 543 544 static struct rmi_device_platform_data rmi_hid_pdata = { 545 .sensor_pdata = { 546 .sensor_type = rmi_sensor_touchpad, 547 .axis_align.flip_y = true, 548 .dribble = RMI_REG_STATE_ON, 549 .palm_detect = RMI_REG_STATE_OFF, 550 }, 551 }; 552 553 static const struct rmi_transport_ops hid_rmi_ops = { 554 .write_block = rmi_hid_write_block, 555 .read_block = rmi_hid_read_block, 556 .reset = rmi_hid_reset, 557 }; 558 559 static void rmi_irq_teardown(void *data) 560 { 561 struct rmi_data *hdata = data; 562 struct irq_domain *domain = hdata->domain; 563 564 if (!domain) 565 return; 566 567 irq_dispose_mapping(irq_find_mapping(domain, 0)); 568 569 irq_domain_remove(domain); 570 hdata->domain = NULL; 571 hdata->rmi_irq = 0; 572 } 573 574 static int rmi_irq_map(struct irq_domain *h, unsigned int virq, 575 irq_hw_number_t hw_irq_num) 576 { 577 irq_set_chip_and_handler(virq, &dummy_irq_chip, handle_simple_irq); 578 579 return 0; 580 } 581 582 static const struct irq_domain_ops rmi_irq_ops = { 583 .map = rmi_irq_map, 584 }; 585 586 static int rmi_setup_irq_domain(struct hid_device *hdev) 587 { 588 struct rmi_data *hdata = hid_get_drvdata(hdev); 589 int ret; 590 591 hdata->domain = irq_domain_create_linear(hdev->dev.fwnode, 1, 592 &rmi_irq_ops, hdata); 593 if (!hdata->domain) 594 return -ENOMEM; 595 596 ret = devm_add_action_or_reset(&hdev->dev, &rmi_irq_teardown, hdata); 597 if (ret) 598 return ret; 599 600 hdata->rmi_irq = irq_create_mapping(hdata->domain, 0); 601 if (hdata->rmi_irq <= 0) { 602 hid_err(hdev, "Can't allocate an IRQ\n"); 603 return hdata->rmi_irq < 0 ? hdata->rmi_irq : -ENXIO; 604 } 605 606 return 0; 607 } 608 609 static int rmi_probe(struct hid_device *hdev, const struct hid_device_id *id) 610 { 611 struct rmi_data *data = NULL; 612 int ret; 613 size_t alloc_size; 614 struct hid_report *input_report; 615 struct hid_report *output_report; 616 struct hid_report *feature_report; 617 618 data = devm_kzalloc(&hdev->dev, sizeof(struct rmi_data), GFP_KERNEL); 619 if (!data) 620 return -ENOMEM; 621 622 INIT_WORK(&data->reset_work, rmi_reset_work); 623 data->hdev = hdev; 624 625 hid_set_drvdata(hdev, data); 626 627 hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS; 628 629 ret = hid_parse(hdev); 630 if (ret) { 631 hid_err(hdev, "parse failed\n"); 632 return ret; 633 } 634 635 if (id->driver_data) 636 data->device_flags = id->driver_data; 637 638 /* 639 * Check for the RMI specific report ids. If they are misisng 640 * simply return and let the events be processed by hid-input 641 */ 642 if (!rmi_check_valid_report_id(hdev, HID_FEATURE_REPORT, 643 RMI_SET_RMI_MODE_REPORT_ID, &feature_report)) { 644 hid_dbg(hdev, "device does not have set mode feature report\n"); 645 goto start; 646 } 647 648 if (!rmi_check_valid_report_id(hdev, HID_INPUT_REPORT, 649 RMI_ATTN_REPORT_ID, &input_report)) { 650 hid_dbg(hdev, "device does not have attention input report\n"); 651 goto start; 652 } 653 654 data->input_report_size = hid_report_len(input_report); 655 656 if (!rmi_check_valid_report_id(hdev, HID_OUTPUT_REPORT, 657 RMI_WRITE_REPORT_ID, &output_report)) { 658 hid_dbg(hdev, 659 "device does not have rmi write output report\n"); 660 goto start; 661 } 662 663 data->output_report_size = hid_report_len(output_report); 664 665 data->device_flags |= RMI_DEVICE; 666 alloc_size = data->output_report_size + data->input_report_size; 667 668 data->writeReport = devm_kzalloc(&hdev->dev, alloc_size, GFP_KERNEL); 669 if (!data->writeReport) { 670 hid_err(hdev, "failed to allocate buffer for HID reports\n"); 671 return -ENOMEM; 672 } 673 674 data->readReport = data->writeReport + data->output_report_size; 675 676 init_waitqueue_head(&data->wait); 677 678 mutex_init(&data->page_mutex); 679 680 ret = rmi_setup_irq_domain(hdev); 681 if (ret) { 682 hid_err(hdev, "failed to allocate IRQ domain\n"); 683 return ret; 684 } 685 686 if (data->device_flags & RMI_DEVICE_HAS_PHYS_BUTTONS) 687 rmi_hid_pdata.f30_data.disable = true; 688 689 data->xport.dev = hdev->dev.parent; 690 data->xport.pdata = rmi_hid_pdata; 691 data->xport.pdata.irq = data->rmi_irq; 692 data->xport.proto_name = "hid"; 693 data->xport.ops = &hid_rmi_ops; 694 695 start: 696 ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT); 697 if (ret) { 698 hid_err(hdev, "hw start failed\n"); 699 return ret; 700 } 701 702 return 0; 703 } 704 705 static void rmi_remove(struct hid_device *hdev) 706 { 707 struct rmi_data *hdata = hid_get_drvdata(hdev); 708 709 clear_bit(RMI_STARTED, &hdata->flags); 710 cancel_work_sync(&hdata->reset_work); 711 rmi_unregister_transport_device(&hdata->xport); 712 713 hid_hw_stop(hdev); 714 } 715 716 static const struct hid_device_id rmi_id[] = { 717 { HID_USB_DEVICE(USB_VENDOR_ID_RAZER, USB_DEVICE_ID_RAZER_BLADE_14), 718 .driver_data = RMI_DEVICE_HAS_PHYS_BUTTONS }, 719 { HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_X1_COVER) }, 720 { HID_DEVICE(HID_BUS_ANY, HID_GROUP_RMI, HID_ANY_ID, HID_ANY_ID) }, 721 { } 722 }; 723 MODULE_DEVICE_TABLE(hid, rmi_id); 724 725 static struct hid_driver rmi_driver = { 726 .name = "hid-rmi", 727 .id_table = rmi_id, 728 .probe = rmi_probe, 729 .remove = rmi_remove, 730 .event = rmi_event, 731 .raw_event = rmi_raw_event, 732 .input_mapping = rmi_input_mapping, 733 .input_configured = rmi_input_configured, 734 #ifdef CONFIG_PM 735 .suspend = rmi_suspend, 736 .resume = rmi_post_resume, 737 .reset_resume = rmi_post_resume, 738 #endif 739 }; 740 741 module_hid_driver(rmi_driver); 742 743 MODULE_AUTHOR("Andrew Duggan <aduggan@synaptics.com>"); 744 MODULE_DESCRIPTION("RMI HID driver"); 745 MODULE_LICENSE("GPL"); 746