1 /* 2 * HID driver for N-Trig touchscreens 3 * 4 * Copyright (c) 2008-2010 Rafi Rubin 5 * Copyright (c) 2009-2010 Stephane Chatty 6 * 7 */ 8 9 /* 10 * This program is free software; you can redistribute it and/or modify it 11 * under the terms of the GNU General Public License as published by the Free 12 * Software Foundation; either version 2 of the License, or (at your option) 13 * any later version. 14 */ 15 16 #include <linux/device.h> 17 #include <linux/hid.h> 18 #include <linux/usb.h> 19 #include "usbhid/usbhid.h" 20 #include <linux/module.h> 21 #include <linux/slab.h> 22 23 #include "hid-ids.h" 24 25 #define NTRIG_DUPLICATE_USAGES 0x001 26 27 static unsigned int min_width; 28 module_param(min_width, uint, 0644); 29 MODULE_PARM_DESC(min_width, "Minimum touch contact width to accept."); 30 31 static unsigned int min_height; 32 module_param(min_height, uint, 0644); 33 MODULE_PARM_DESC(min_height, "Minimum touch contact height to accept."); 34 35 static unsigned int activate_slack = 1; 36 module_param(activate_slack, uint, 0644); 37 MODULE_PARM_DESC(activate_slack, "Number of touch frames to ignore at " 38 "the start of touch input."); 39 40 static unsigned int deactivate_slack = 4; 41 module_param(deactivate_slack, uint, 0644); 42 MODULE_PARM_DESC(deactivate_slack, "Number of empty frames to ignore before " 43 "deactivating touch."); 44 45 static unsigned int activation_width = 64; 46 module_param(activation_width, uint, 0644); 47 MODULE_PARM_DESC(activation_width, "Width threshold to immediately start " 48 "processing touch events."); 49 50 static unsigned int activation_height = 32; 51 module_param(activation_height, uint, 0644); 52 MODULE_PARM_DESC(activation_height, "Height threshold to immediately start " 53 "processing touch events."); 54 55 struct ntrig_data { 56 /* Incoming raw values for a single contact */ 57 __u16 x, y, w, h; 58 __u16 id; 59 60 bool tipswitch; 61 bool confidence; 62 bool first_contact_touch; 63 64 bool reading_mt; 65 66 __u8 mt_footer[4]; 67 __u8 mt_foot_count; 68 69 /* The current activation state. */ 70 __s8 act_state; 71 72 /* Empty frames to ignore before recognizing the end of activity */ 73 __s8 deactivate_slack; 74 75 /* Frames to ignore before acknowledging the start of activity */ 76 __s8 activate_slack; 77 78 /* Minimum size contact to accept */ 79 __u16 min_width; 80 __u16 min_height; 81 82 /* Threshold to override activation slack */ 83 __u16 activation_width; 84 __u16 activation_height; 85 86 __u16 sensor_logical_width; 87 __u16 sensor_logical_height; 88 __u16 sensor_physical_width; 89 __u16 sensor_physical_height; 90 }; 91 92 93 /* 94 * This function converts the 4 byte raw firmware code into 95 * a string containing 5 comma separated numbers. 96 */ 97 static int ntrig_version_string(unsigned char *raw, char *buf) 98 { 99 __u8 a = (raw[1] & 0x0e) >> 1; 100 __u8 b = (raw[0] & 0x3c) >> 2; 101 __u8 c = ((raw[0] & 0x03) << 3) | ((raw[3] & 0xe0) >> 5); 102 __u8 d = ((raw[3] & 0x07) << 3) | ((raw[2] & 0xe0) >> 5); 103 __u8 e = raw[2] & 0x07; 104 105 /* 106 * As yet unmapped bits: 107 * 0b11000000 0b11110001 0b00011000 0b00011000 108 */ 109 110 return sprintf(buf, "%u.%u.%u.%u.%u", a, b, c, d, e); 111 } 112 113 static inline int ntrig_get_mode(struct hid_device *hdev) 114 { 115 struct hid_report *report = hdev->report_enum[HID_FEATURE_REPORT]. 116 report_id_hash[0x0d]; 117 118 if (!report) 119 return -EINVAL; 120 121 hid_hw_request(hdev, report, HID_REQ_GET_REPORT); 122 hid_hw_wait(hdev); 123 return (int)report->field[0]->value[0]; 124 } 125 126 static inline void ntrig_set_mode(struct hid_device *hdev, const int mode) 127 { 128 struct hid_report *report; 129 __u8 mode_commands[4] = { 0xe, 0xf, 0x1b, 0x10 }; 130 131 if (mode < 0 || mode > 3) 132 return; 133 134 report = hdev->report_enum[HID_FEATURE_REPORT]. 135 report_id_hash[mode_commands[mode]]; 136 137 if (!report) 138 return; 139 140 hid_hw_request(hdev, report, HID_REQ_GET_REPORT); 141 } 142 143 static void ntrig_report_version(struct hid_device *hdev) 144 { 145 int ret; 146 char buf[20]; 147 struct usb_device *usb_dev = hid_to_usb_dev(hdev); 148 unsigned char *data = kmalloc(8, GFP_KERNEL); 149 150 if (!data) 151 goto err_free; 152 153 ret = usb_control_msg(usb_dev, usb_rcvctrlpipe(usb_dev, 0), 154 USB_REQ_CLEAR_FEATURE, 155 USB_TYPE_CLASS | USB_RECIP_INTERFACE | 156 USB_DIR_IN, 157 0x30c, 1, data, 8, 158 USB_CTRL_SET_TIMEOUT); 159 160 if (ret == 8) { 161 ret = ntrig_version_string(&data[2], buf); 162 163 hid_info(hdev, "Firmware version: %s (%02x%02x %02x%02x)\n", 164 buf, data[2], data[3], data[4], data[5]); 165 } 166 167 err_free: 168 kfree(data); 169 } 170 171 static ssize_t show_phys_width(struct device *dev, 172 struct device_attribute *attr, 173 char *buf) 174 { 175 struct hid_device *hdev = container_of(dev, struct hid_device, dev); 176 struct ntrig_data *nd = hid_get_drvdata(hdev); 177 178 return sprintf(buf, "%d\n", nd->sensor_physical_width); 179 } 180 181 static DEVICE_ATTR(sensor_physical_width, S_IRUGO, show_phys_width, NULL); 182 183 static ssize_t show_phys_height(struct device *dev, 184 struct device_attribute *attr, 185 char *buf) 186 { 187 struct hid_device *hdev = container_of(dev, struct hid_device, dev); 188 struct ntrig_data *nd = hid_get_drvdata(hdev); 189 190 return sprintf(buf, "%d\n", nd->sensor_physical_height); 191 } 192 193 static DEVICE_ATTR(sensor_physical_height, S_IRUGO, show_phys_height, NULL); 194 195 static ssize_t show_log_width(struct device *dev, 196 struct device_attribute *attr, 197 char *buf) 198 { 199 struct hid_device *hdev = container_of(dev, struct hid_device, dev); 200 struct ntrig_data *nd = hid_get_drvdata(hdev); 201 202 return sprintf(buf, "%d\n", nd->sensor_logical_width); 203 } 204 205 static DEVICE_ATTR(sensor_logical_width, S_IRUGO, show_log_width, NULL); 206 207 static ssize_t show_log_height(struct device *dev, 208 struct device_attribute *attr, 209 char *buf) 210 { 211 struct hid_device *hdev = container_of(dev, struct hid_device, dev); 212 struct ntrig_data *nd = hid_get_drvdata(hdev); 213 214 return sprintf(buf, "%d\n", nd->sensor_logical_height); 215 } 216 217 static DEVICE_ATTR(sensor_logical_height, S_IRUGO, show_log_height, NULL); 218 219 static ssize_t show_min_width(struct device *dev, 220 struct device_attribute *attr, 221 char *buf) 222 { 223 struct hid_device *hdev = container_of(dev, struct hid_device, dev); 224 struct ntrig_data *nd = hid_get_drvdata(hdev); 225 226 return sprintf(buf, "%d\n", nd->min_width * 227 nd->sensor_physical_width / 228 nd->sensor_logical_width); 229 } 230 231 static ssize_t set_min_width(struct device *dev, 232 struct device_attribute *attr, 233 const char *buf, size_t count) 234 { 235 struct hid_device *hdev = container_of(dev, struct hid_device, dev); 236 struct ntrig_data *nd = hid_get_drvdata(hdev); 237 238 unsigned long val; 239 240 if (strict_strtoul(buf, 0, &val)) 241 return -EINVAL; 242 243 if (val > nd->sensor_physical_width) 244 return -EINVAL; 245 246 nd->min_width = val * nd->sensor_logical_width / 247 nd->sensor_physical_width; 248 249 return count; 250 } 251 252 static DEVICE_ATTR(min_width, S_IWUSR | S_IRUGO, show_min_width, set_min_width); 253 254 static ssize_t show_min_height(struct device *dev, 255 struct device_attribute *attr, 256 char *buf) 257 { 258 struct hid_device *hdev = container_of(dev, struct hid_device, dev); 259 struct ntrig_data *nd = hid_get_drvdata(hdev); 260 261 return sprintf(buf, "%d\n", nd->min_height * 262 nd->sensor_physical_height / 263 nd->sensor_logical_height); 264 } 265 266 static ssize_t set_min_height(struct device *dev, 267 struct device_attribute *attr, 268 const char *buf, size_t count) 269 { 270 struct hid_device *hdev = container_of(dev, struct hid_device, dev); 271 struct ntrig_data *nd = hid_get_drvdata(hdev); 272 273 unsigned long val; 274 275 if (strict_strtoul(buf, 0, &val)) 276 return -EINVAL; 277 278 if (val > nd->sensor_physical_height) 279 return -EINVAL; 280 281 nd->min_height = val * nd->sensor_logical_height / 282 nd->sensor_physical_height; 283 284 return count; 285 } 286 287 static DEVICE_ATTR(min_height, S_IWUSR | S_IRUGO, show_min_height, 288 set_min_height); 289 290 static ssize_t show_activate_slack(struct device *dev, 291 struct device_attribute *attr, 292 char *buf) 293 { 294 struct hid_device *hdev = container_of(dev, struct hid_device, dev); 295 struct ntrig_data *nd = hid_get_drvdata(hdev); 296 297 return sprintf(buf, "%d\n", nd->activate_slack); 298 } 299 300 static ssize_t set_activate_slack(struct device *dev, 301 struct device_attribute *attr, 302 const char *buf, size_t count) 303 { 304 struct hid_device *hdev = container_of(dev, struct hid_device, dev); 305 struct ntrig_data *nd = hid_get_drvdata(hdev); 306 307 unsigned long val; 308 309 if (strict_strtoul(buf, 0, &val)) 310 return -EINVAL; 311 312 if (val > 0x7f) 313 return -EINVAL; 314 315 nd->activate_slack = val; 316 317 return count; 318 } 319 320 static DEVICE_ATTR(activate_slack, S_IWUSR | S_IRUGO, show_activate_slack, 321 set_activate_slack); 322 323 static ssize_t show_activation_width(struct device *dev, 324 struct device_attribute *attr, 325 char *buf) 326 { 327 struct hid_device *hdev = container_of(dev, struct hid_device, dev); 328 struct ntrig_data *nd = hid_get_drvdata(hdev); 329 330 return sprintf(buf, "%d\n", nd->activation_width * 331 nd->sensor_physical_width / 332 nd->sensor_logical_width); 333 } 334 335 static ssize_t set_activation_width(struct device *dev, 336 struct device_attribute *attr, 337 const char *buf, size_t count) 338 { 339 struct hid_device *hdev = container_of(dev, struct hid_device, dev); 340 struct ntrig_data *nd = hid_get_drvdata(hdev); 341 342 unsigned long val; 343 344 if (strict_strtoul(buf, 0, &val)) 345 return -EINVAL; 346 347 if (val > nd->sensor_physical_width) 348 return -EINVAL; 349 350 nd->activation_width = val * nd->sensor_logical_width / 351 nd->sensor_physical_width; 352 353 return count; 354 } 355 356 static DEVICE_ATTR(activation_width, S_IWUSR | S_IRUGO, show_activation_width, 357 set_activation_width); 358 359 static ssize_t show_activation_height(struct device *dev, 360 struct device_attribute *attr, 361 char *buf) 362 { 363 struct hid_device *hdev = container_of(dev, struct hid_device, dev); 364 struct ntrig_data *nd = hid_get_drvdata(hdev); 365 366 return sprintf(buf, "%d\n", nd->activation_height * 367 nd->sensor_physical_height / 368 nd->sensor_logical_height); 369 } 370 371 static ssize_t set_activation_height(struct device *dev, 372 struct device_attribute *attr, 373 const char *buf, size_t count) 374 { 375 struct hid_device *hdev = container_of(dev, struct hid_device, dev); 376 struct ntrig_data *nd = hid_get_drvdata(hdev); 377 378 unsigned long val; 379 380 if (strict_strtoul(buf, 0, &val)) 381 return -EINVAL; 382 383 if (val > nd->sensor_physical_height) 384 return -EINVAL; 385 386 nd->activation_height = val * nd->sensor_logical_height / 387 nd->sensor_physical_height; 388 389 return count; 390 } 391 392 static DEVICE_ATTR(activation_height, S_IWUSR | S_IRUGO, 393 show_activation_height, set_activation_height); 394 395 static ssize_t show_deactivate_slack(struct device *dev, 396 struct device_attribute *attr, 397 char *buf) 398 { 399 struct hid_device *hdev = container_of(dev, struct hid_device, dev); 400 struct ntrig_data *nd = hid_get_drvdata(hdev); 401 402 return sprintf(buf, "%d\n", -nd->deactivate_slack); 403 } 404 405 static ssize_t set_deactivate_slack(struct device *dev, 406 struct device_attribute *attr, 407 const char *buf, size_t count) 408 { 409 struct hid_device *hdev = container_of(dev, struct hid_device, dev); 410 struct ntrig_data *nd = hid_get_drvdata(hdev); 411 412 unsigned long val; 413 414 if (strict_strtoul(buf, 0, &val)) 415 return -EINVAL; 416 417 /* 418 * No more than 8 terminal frames have been observed so far 419 * and higher slack is highly likely to leave the single 420 * touch emulation stuck down. 421 */ 422 if (val > 7) 423 return -EINVAL; 424 425 nd->deactivate_slack = -val; 426 427 return count; 428 } 429 430 static DEVICE_ATTR(deactivate_slack, S_IWUSR | S_IRUGO, show_deactivate_slack, 431 set_deactivate_slack); 432 433 static struct attribute *sysfs_attrs[] = { 434 &dev_attr_sensor_physical_width.attr, 435 &dev_attr_sensor_physical_height.attr, 436 &dev_attr_sensor_logical_width.attr, 437 &dev_attr_sensor_logical_height.attr, 438 &dev_attr_min_height.attr, 439 &dev_attr_min_width.attr, 440 &dev_attr_activate_slack.attr, 441 &dev_attr_activation_width.attr, 442 &dev_attr_activation_height.attr, 443 &dev_attr_deactivate_slack.attr, 444 NULL 445 }; 446 447 static struct attribute_group ntrig_attribute_group = { 448 .attrs = sysfs_attrs 449 }; 450 451 /* 452 * this driver is aimed at two firmware versions in circulation: 453 * - dual pen/finger single touch 454 * - finger multitouch, pen not working 455 */ 456 457 static int ntrig_input_mapping(struct hid_device *hdev, struct hid_input *hi, 458 struct hid_field *field, struct hid_usage *usage, 459 unsigned long **bit, int *max) 460 { 461 struct ntrig_data *nd = hid_get_drvdata(hdev); 462 463 /* No special mappings needed for the pen and single touch */ 464 if (field->physical) 465 return 0; 466 467 switch (usage->hid & HID_USAGE_PAGE) { 468 case HID_UP_GENDESK: 469 switch (usage->hid) { 470 case HID_GD_X: 471 hid_map_usage(hi, usage, bit, max, 472 EV_ABS, ABS_MT_POSITION_X); 473 input_set_abs_params(hi->input, ABS_X, 474 field->logical_minimum, 475 field->logical_maximum, 0, 0); 476 477 if (!nd->sensor_logical_width) { 478 nd->sensor_logical_width = 479 field->logical_maximum - 480 field->logical_minimum; 481 nd->sensor_physical_width = 482 field->physical_maximum - 483 field->physical_minimum; 484 nd->activation_width = activation_width * 485 nd->sensor_logical_width / 486 nd->sensor_physical_width; 487 nd->min_width = min_width * 488 nd->sensor_logical_width / 489 nd->sensor_physical_width; 490 } 491 return 1; 492 case HID_GD_Y: 493 hid_map_usage(hi, usage, bit, max, 494 EV_ABS, ABS_MT_POSITION_Y); 495 input_set_abs_params(hi->input, ABS_Y, 496 field->logical_minimum, 497 field->logical_maximum, 0, 0); 498 499 if (!nd->sensor_logical_height) { 500 nd->sensor_logical_height = 501 field->logical_maximum - 502 field->logical_minimum; 503 nd->sensor_physical_height = 504 field->physical_maximum - 505 field->physical_minimum; 506 nd->activation_height = activation_height * 507 nd->sensor_logical_height / 508 nd->sensor_physical_height; 509 nd->min_height = min_height * 510 nd->sensor_logical_height / 511 nd->sensor_physical_height; 512 } 513 return 1; 514 } 515 return 0; 516 517 case HID_UP_DIGITIZER: 518 switch (usage->hid) { 519 /* we do not want to map these for now */ 520 case HID_DG_CONTACTID: /* Not trustworthy, squelch for now */ 521 case HID_DG_INPUTMODE: 522 case HID_DG_DEVICEINDEX: 523 case HID_DG_CONTACTMAX: 524 return -1; 525 526 /* width/height mapped on TouchMajor/TouchMinor/Orientation */ 527 case HID_DG_WIDTH: 528 hid_map_usage(hi, usage, bit, max, 529 EV_ABS, ABS_MT_TOUCH_MAJOR); 530 return 1; 531 case HID_DG_HEIGHT: 532 hid_map_usage(hi, usage, bit, max, 533 EV_ABS, ABS_MT_TOUCH_MINOR); 534 input_set_abs_params(hi->input, ABS_MT_ORIENTATION, 535 0, 1, 0, 0); 536 return 1; 537 } 538 return 0; 539 540 case 0xff000000: 541 /* we do not want to map these: no input-oriented meaning */ 542 return -1; 543 } 544 545 return 0; 546 } 547 548 static int ntrig_input_mapped(struct hid_device *hdev, struct hid_input *hi, 549 struct hid_field *field, struct hid_usage *usage, 550 unsigned long **bit, int *max) 551 { 552 /* No special mappings needed for the pen and single touch */ 553 if (field->physical) 554 return 0; 555 556 if (usage->type == EV_KEY || usage->type == EV_REL 557 || usage->type == EV_ABS) 558 clear_bit(usage->code, *bit); 559 560 return 0; 561 } 562 563 /* 564 * this function is called upon all reports 565 * so that we can filter contact point information, 566 * decide whether we are in multi or single touch mode 567 * and call input_mt_sync after each point if necessary 568 */ 569 static int ntrig_event (struct hid_device *hid, struct hid_field *field, 570 struct hid_usage *usage, __s32 value) 571 { 572 struct ntrig_data *nd = hid_get_drvdata(hid); 573 struct input_dev *input; 574 575 /* Skip processing if not a claimed input */ 576 if (!(hid->claimed & HID_CLAIMED_INPUT)) 577 goto not_claimed_input; 578 579 /* This function is being called before the structures are fully 580 * initialized */ 581 if(!(field->hidinput && field->hidinput->input)) 582 return -EINVAL; 583 584 input = field->hidinput->input; 585 586 /* No special handling needed for the pen */ 587 if (field->application == HID_DG_PEN) 588 return 0; 589 590 switch (usage->hid) { 591 case 0xff000001: 592 /* Tag indicating the start of a multitouch group */ 593 nd->reading_mt = 1; 594 nd->first_contact_touch = 0; 595 break; 596 case HID_DG_TIPSWITCH: 597 nd->tipswitch = value; 598 /* Prevent emission of touch until validated */ 599 return 1; 600 case HID_DG_CONFIDENCE: 601 nd->confidence = value; 602 break; 603 case HID_GD_X: 604 nd->x = value; 605 /* Clear the contact footer */ 606 nd->mt_foot_count = 0; 607 break; 608 case HID_GD_Y: 609 nd->y = value; 610 break; 611 case HID_DG_CONTACTID: 612 nd->id = value; 613 break; 614 case HID_DG_WIDTH: 615 nd->w = value; 616 break; 617 case HID_DG_HEIGHT: 618 nd->h = value; 619 /* 620 * when in single touch mode, this is the last 621 * report received in a finger event. We want 622 * to emit a normal (X, Y) position 623 */ 624 if (!nd->reading_mt) { 625 /* 626 * TipSwitch indicates the presence of a 627 * finger in single touch mode. 628 */ 629 input_report_key(input, BTN_TOUCH, 630 nd->tipswitch); 631 input_report_key(input, BTN_TOOL_DOUBLETAP, 632 nd->tipswitch); 633 input_event(input, EV_ABS, ABS_X, nd->x); 634 input_event(input, EV_ABS, ABS_Y, nd->y); 635 } 636 break; 637 case 0xff000002: 638 /* 639 * we receive this when the device is in multitouch 640 * mode. The first of the three values tagged with 641 * this usage tells if the contact point is real 642 * or a placeholder 643 */ 644 645 /* Shouldn't get more than 4 footer packets, so skip */ 646 if (nd->mt_foot_count >= 4) 647 break; 648 649 nd->mt_footer[nd->mt_foot_count++] = value; 650 651 /* if the footer isn't complete break */ 652 if (nd->mt_foot_count != 4) 653 break; 654 655 /* Pen activity signal. */ 656 if (nd->mt_footer[2]) { 657 /* 658 * When the pen deactivates touch, we see a 659 * bogus frame with ContactCount > 0. 660 * We can 661 * save a bit of work by ensuring act_state < 0 662 * even if deactivation slack is turned off. 663 */ 664 nd->act_state = deactivate_slack - 1; 665 nd->confidence = 0; 666 break; 667 } 668 669 /* 670 * The first footer value indicates the presence of a 671 * finger. 672 */ 673 if (nd->mt_footer[0]) { 674 /* 675 * We do not want to process contacts under 676 * the size threshold, but do not want to 677 * ignore them for activation state 678 */ 679 if (nd->w < nd->min_width || 680 nd->h < nd->min_height) 681 nd->confidence = 0; 682 } else 683 break; 684 685 if (nd->act_state > 0) { 686 /* 687 * Contact meets the activation size threshold 688 */ 689 if (nd->w >= nd->activation_width && 690 nd->h >= nd->activation_height) { 691 if (nd->id) 692 /* 693 * first contact, activate now 694 */ 695 nd->act_state = 0; 696 else { 697 /* 698 * avoid corrupting this frame 699 * but ensure next frame will 700 * be active 701 */ 702 nd->act_state = 1; 703 break; 704 } 705 } else 706 /* 707 * Defer adjusting the activation state 708 * until the end of the frame. 709 */ 710 break; 711 } 712 713 /* Discarding this contact */ 714 if (!nd->confidence) 715 break; 716 717 /* emit a normal (X, Y) for the first point only */ 718 if (nd->id == 0) { 719 /* 720 * TipSwitch is superfluous in multitouch 721 * mode. The footer events tell us 722 * if there is a finger on the screen or 723 * not. 724 */ 725 nd->first_contact_touch = nd->confidence; 726 input_event(input, EV_ABS, ABS_X, nd->x); 727 input_event(input, EV_ABS, ABS_Y, nd->y); 728 } 729 730 /* Emit MT events */ 731 input_event(input, EV_ABS, ABS_MT_POSITION_X, nd->x); 732 input_event(input, EV_ABS, ABS_MT_POSITION_Y, nd->y); 733 734 /* 735 * Translate from height and width to size 736 * and orientation. 737 */ 738 if (nd->w > nd->h) { 739 input_event(input, EV_ABS, 740 ABS_MT_ORIENTATION, 1); 741 input_event(input, EV_ABS, 742 ABS_MT_TOUCH_MAJOR, nd->w); 743 input_event(input, EV_ABS, 744 ABS_MT_TOUCH_MINOR, nd->h); 745 } else { 746 input_event(input, EV_ABS, 747 ABS_MT_ORIENTATION, 0); 748 input_event(input, EV_ABS, 749 ABS_MT_TOUCH_MAJOR, nd->h); 750 input_event(input, EV_ABS, 751 ABS_MT_TOUCH_MINOR, nd->w); 752 } 753 input_mt_sync(field->hidinput->input); 754 break; 755 756 case HID_DG_CONTACTCOUNT: /* End of a multitouch group */ 757 if (!nd->reading_mt) /* Just to be sure */ 758 break; 759 760 nd->reading_mt = 0; 761 762 763 /* 764 * Activation state machine logic: 765 * 766 * Fundamental states: 767 * state > 0: Inactive 768 * state <= 0: Active 769 * state < -deactivate_slack: 770 * Pen termination of touch 771 * 772 * Specific values of interest 773 * state == activate_slack 774 * no valid input since the last reset 775 * 776 * state == 0 777 * general operational state 778 * 779 * state == -deactivate_slack 780 * read sufficient empty frames to accept 781 * the end of input and reset 782 */ 783 784 if (nd->act_state > 0) { /* Currently inactive */ 785 if (value) 786 /* 787 * Consider each live contact as 788 * evidence of intentional activity. 789 */ 790 nd->act_state = (nd->act_state > value) 791 ? nd->act_state - value 792 : 0; 793 else 794 /* 795 * Empty frame before we hit the 796 * activity threshold, reset. 797 */ 798 nd->act_state = nd->activate_slack; 799 800 /* 801 * Entered this block inactive and no 802 * coordinates sent this frame, so hold off 803 * on button state. 804 */ 805 break; 806 } else { /* Currently active */ 807 if (value && nd->act_state >= 808 nd->deactivate_slack) 809 /* 810 * Live point: clear accumulated 811 * deactivation count. 812 */ 813 nd->act_state = 0; 814 else if (nd->act_state <= nd->deactivate_slack) 815 /* 816 * We've consumed the deactivation 817 * slack, time to deactivate and reset. 818 */ 819 nd->act_state = 820 nd->activate_slack; 821 else { /* Move towards deactivation */ 822 nd->act_state--; 823 break; 824 } 825 } 826 827 if (nd->first_contact_touch && nd->act_state <= 0) { 828 /* 829 * Check to see if we're ready to start 830 * emitting touch events. 831 * 832 * Note: activation slack will decrease over 833 * the course of the frame, and it will be 834 * inconsistent from the start to the end of 835 * the frame. However if the frame starts 836 * with slack, first_contact_touch will still 837 * be 0 and we will not get to this point. 838 */ 839 input_report_key(input, BTN_TOOL_DOUBLETAP, 1); 840 input_report_key(input, BTN_TOUCH, 1); 841 } else { 842 input_report_key(input, BTN_TOOL_DOUBLETAP, 0); 843 input_report_key(input, BTN_TOUCH, 0); 844 } 845 break; 846 847 default: 848 /* fall-back to the generic hidinput handling */ 849 return 0; 850 } 851 852 not_claimed_input: 853 854 /* we have handled the hidinput part, now remains hiddev */ 855 if ((hid->claimed & HID_CLAIMED_HIDDEV) && hid->hiddev_hid_event) 856 hid->hiddev_hid_event(hid, field, usage, value); 857 858 return 1; 859 } 860 861 static void ntrig_input_configured(struct hid_device *hid, 862 struct hid_input *hidinput) 863 864 { 865 struct input_dev *input = hidinput->input; 866 867 if (hidinput->report->maxfield < 1) 868 return; 869 870 switch (hidinput->report->field[0]->application) { 871 case HID_DG_PEN: 872 input->name = "N-Trig Pen"; 873 break; 874 case HID_DG_TOUCHSCREEN: 875 /* These keys are redundant for fingers, clear them 876 * to prevent incorrect identification */ 877 __clear_bit(BTN_TOOL_PEN, input->keybit); 878 __clear_bit(BTN_TOOL_FINGER, input->keybit); 879 __clear_bit(BTN_0, input->keybit); 880 __set_bit(BTN_TOOL_DOUBLETAP, input->keybit); 881 /* 882 * The physical touchscreen (single touch) 883 * input has a value for physical, whereas 884 * the multitouch only has logical input 885 * fields. 886 */ 887 input->name = (hidinput->report->field[0]->physical) ? 888 "N-Trig Touchscreen" : 889 "N-Trig MultiTouch"; 890 break; 891 } 892 } 893 894 static int ntrig_probe(struct hid_device *hdev, const struct hid_device_id *id) 895 { 896 int ret; 897 struct ntrig_data *nd; 898 struct hid_report *report; 899 900 if (id->driver_data) 901 hdev->quirks |= HID_QUIRK_MULTI_INPUT 902 | HID_QUIRK_NO_INIT_REPORTS; 903 904 nd = kmalloc(sizeof(struct ntrig_data), GFP_KERNEL); 905 if (!nd) { 906 hid_err(hdev, "cannot allocate N-Trig data\n"); 907 return -ENOMEM; 908 } 909 910 nd->reading_mt = 0; 911 nd->min_width = 0; 912 nd->min_height = 0; 913 nd->activate_slack = activate_slack; 914 nd->act_state = activate_slack; 915 nd->deactivate_slack = -deactivate_slack; 916 nd->sensor_logical_width = 1; 917 nd->sensor_logical_height = 1; 918 nd->sensor_physical_width = 1; 919 nd->sensor_physical_height = 1; 920 921 hid_set_drvdata(hdev, nd); 922 923 ret = hid_parse(hdev); 924 if (ret) { 925 hid_err(hdev, "parse failed\n"); 926 goto err_free; 927 } 928 929 ret = hid_hw_start(hdev, HID_CONNECT_DEFAULT & ~HID_CONNECT_FF); 930 if (ret) { 931 hid_err(hdev, "hw start failed\n"); 932 goto err_free; 933 } 934 935 /* This is needed for devices with more recent firmware versions */ 936 report = hdev->report_enum[HID_FEATURE_REPORT].report_id_hash[0x0a]; 937 if (report) { 938 /* Let the device settle to ensure the wakeup message gets 939 * through */ 940 hid_hw_wait(hdev); 941 hid_hw_request(hdev, report, HID_REQ_GET_REPORT); 942 943 /* 944 * Sanity check: if the current mode is invalid reset it to 945 * something reasonable. 946 */ 947 if (ntrig_get_mode(hdev) >= 4) 948 ntrig_set_mode(hdev, 3); 949 } 950 951 ntrig_report_version(hdev); 952 953 ret = sysfs_create_group(&hdev->dev.kobj, 954 &ntrig_attribute_group); 955 956 return 0; 957 err_free: 958 kfree(nd); 959 return ret; 960 } 961 962 static void ntrig_remove(struct hid_device *hdev) 963 { 964 sysfs_remove_group(&hdev->dev.kobj, 965 &ntrig_attribute_group); 966 hid_hw_stop(hdev); 967 kfree(hid_get_drvdata(hdev)); 968 } 969 970 static const struct hid_device_id ntrig_devices[] = { 971 { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN), 972 .driver_data = NTRIG_DUPLICATE_USAGES }, 973 { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_1), 974 .driver_data = NTRIG_DUPLICATE_USAGES }, 975 { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_2), 976 .driver_data = NTRIG_DUPLICATE_USAGES }, 977 { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_3), 978 .driver_data = NTRIG_DUPLICATE_USAGES }, 979 { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_4), 980 .driver_data = NTRIG_DUPLICATE_USAGES }, 981 { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_5), 982 .driver_data = NTRIG_DUPLICATE_USAGES }, 983 { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_6), 984 .driver_data = NTRIG_DUPLICATE_USAGES }, 985 { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_7), 986 .driver_data = NTRIG_DUPLICATE_USAGES }, 987 { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_8), 988 .driver_data = NTRIG_DUPLICATE_USAGES }, 989 { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_9), 990 .driver_data = NTRIG_DUPLICATE_USAGES }, 991 { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_10), 992 .driver_data = NTRIG_DUPLICATE_USAGES }, 993 { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_11), 994 .driver_data = NTRIG_DUPLICATE_USAGES }, 995 { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_12), 996 .driver_data = NTRIG_DUPLICATE_USAGES }, 997 { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_13), 998 .driver_data = NTRIG_DUPLICATE_USAGES }, 999 { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_14), 1000 .driver_data = NTRIG_DUPLICATE_USAGES }, 1001 { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_15), 1002 .driver_data = NTRIG_DUPLICATE_USAGES }, 1003 { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_16), 1004 .driver_data = NTRIG_DUPLICATE_USAGES }, 1005 { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_17), 1006 .driver_data = NTRIG_DUPLICATE_USAGES }, 1007 { HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN_18), 1008 .driver_data = NTRIG_DUPLICATE_USAGES }, 1009 { } 1010 }; 1011 MODULE_DEVICE_TABLE(hid, ntrig_devices); 1012 1013 static const struct hid_usage_id ntrig_grabbed_usages[] = { 1014 { HID_ANY_ID, HID_ANY_ID, HID_ANY_ID }, 1015 { HID_ANY_ID - 1, HID_ANY_ID - 1, HID_ANY_ID - 1 } 1016 }; 1017 1018 static struct hid_driver ntrig_driver = { 1019 .name = "ntrig", 1020 .id_table = ntrig_devices, 1021 .probe = ntrig_probe, 1022 .remove = ntrig_remove, 1023 .input_mapping = ntrig_input_mapping, 1024 .input_mapped = ntrig_input_mapped, 1025 .input_configured = ntrig_input_configured, 1026 .usage_table = ntrig_grabbed_usages, 1027 .event = ntrig_event, 1028 }; 1029 module_hid_driver(ntrig_driver); 1030 1031 MODULE_LICENSE("GPL"); 1032