1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Copyright (c) 2010 Sascha Hauer <s.hauer@pengutronix.de> 4 * Copyright (C) 2005-2009 Freescale Semiconductor, Inc. 5 */ 6 #include <linux/export.h> 7 #include <linux/module.h> 8 #include <linux/types.h> 9 #include <linux/errno.h> 10 #include <linux/io.h> 11 #include <linux/err.h> 12 #include <linux/platform_device.h> 13 14 #include <video/imx-ipu-v3.h> 15 #include "ipu-prv.h" 16 17 struct ipu_di { 18 void __iomem *base; 19 int id; 20 u32 module; 21 struct clk *clk_di; /* display input clock */ 22 struct clk *clk_ipu; /* IPU bus clock */ 23 struct clk *clk_di_pixel; /* resulting pixel clock */ 24 bool inuse; 25 struct ipu_soc *ipu; 26 }; 27 28 static DEFINE_MUTEX(di_mutex); 29 30 struct di_sync_config { 31 int run_count; 32 int run_src; 33 int offset_count; 34 int offset_src; 35 int repeat_count; 36 int cnt_clr_src; 37 int cnt_polarity_gen_en; 38 int cnt_polarity_clr_src; 39 int cnt_polarity_trigger_src; 40 int cnt_up; 41 int cnt_down; 42 }; 43 44 enum di_pins { 45 DI_PIN11 = 0, 46 DI_PIN12 = 1, 47 DI_PIN13 = 2, 48 DI_PIN14 = 3, 49 DI_PIN15 = 4, 50 DI_PIN16 = 5, 51 DI_PIN17 = 6, 52 DI_PIN_CS = 7, 53 54 DI_PIN_SER_CLK = 0, 55 DI_PIN_SER_RS = 1, 56 }; 57 58 enum di_sync_wave { 59 DI_SYNC_NONE = 0, 60 DI_SYNC_CLK = 1, 61 DI_SYNC_INT_HSYNC = 2, 62 DI_SYNC_HSYNC = 3, 63 DI_SYNC_VSYNC = 4, 64 DI_SYNC_DE = 6, 65 66 DI_SYNC_CNT1 = 2, /* counter >= 2 only */ 67 DI_SYNC_CNT4 = 5, /* counter >= 5 only */ 68 DI_SYNC_CNT5 = 6, /* counter >= 6 only */ 69 }; 70 71 #define SYNC_WAVE 0 72 73 #define DI_GENERAL 0x0000 74 #define DI_BS_CLKGEN0 0x0004 75 #define DI_BS_CLKGEN1 0x0008 76 #define DI_SW_GEN0(gen) (0x000c + 4 * ((gen) - 1)) 77 #define DI_SW_GEN1(gen) (0x0030 + 4 * ((gen) - 1)) 78 #define DI_STP_REP(gen) (0x0148 + 4 * (((gen) - 1)/2)) 79 #define DI_SYNC_AS_GEN 0x0054 80 #define DI_DW_GEN(gen) (0x0058 + 4 * (gen)) 81 #define DI_DW_SET(gen, set) (0x0088 + 4 * ((gen) + 0xc * (set))) 82 #define DI_SER_CONF 0x015c 83 #define DI_SSC 0x0160 84 #define DI_POL 0x0164 85 #define DI_AW0 0x0168 86 #define DI_AW1 0x016c 87 #define DI_SCR_CONF 0x0170 88 #define DI_STAT 0x0174 89 90 #define DI_SW_GEN0_RUN_COUNT(x) ((x) << 19) 91 #define DI_SW_GEN0_RUN_SRC(x) ((x) << 16) 92 #define DI_SW_GEN0_OFFSET_COUNT(x) ((x) << 3) 93 #define DI_SW_GEN0_OFFSET_SRC(x) ((x) << 0) 94 95 #define DI_SW_GEN1_CNT_POL_GEN_EN(x) ((x) << 29) 96 #define DI_SW_GEN1_CNT_CLR_SRC(x) ((x) << 25) 97 #define DI_SW_GEN1_CNT_POL_TRIGGER_SRC(x) ((x) << 12) 98 #define DI_SW_GEN1_CNT_POL_CLR_SRC(x) ((x) << 9) 99 #define DI_SW_GEN1_CNT_DOWN(x) ((x) << 16) 100 #define DI_SW_GEN1_CNT_UP(x) (x) 101 #define DI_SW_GEN1_AUTO_RELOAD (0x10000000) 102 103 #define DI_DW_GEN_ACCESS_SIZE_OFFSET 24 104 #define DI_DW_GEN_COMPONENT_SIZE_OFFSET 16 105 106 #define DI_GEN_POLARITY_1 (1 << 0) 107 #define DI_GEN_POLARITY_2 (1 << 1) 108 #define DI_GEN_POLARITY_3 (1 << 2) 109 #define DI_GEN_POLARITY_4 (1 << 3) 110 #define DI_GEN_POLARITY_5 (1 << 4) 111 #define DI_GEN_POLARITY_6 (1 << 5) 112 #define DI_GEN_POLARITY_7 (1 << 6) 113 #define DI_GEN_POLARITY_8 (1 << 7) 114 #define DI_GEN_POLARITY_DISP_CLK (1 << 17) 115 #define DI_GEN_DI_CLK_EXT (1 << 20) 116 #define DI_GEN_DI_VSYNC_EXT (1 << 21) 117 118 #define DI_POL_DRDY_DATA_POLARITY (1 << 7) 119 #define DI_POL_DRDY_POLARITY_15 (1 << 4) 120 121 #define DI_VSYNC_SEL_OFFSET 13 122 123 static inline u32 ipu_di_read(struct ipu_di *di, unsigned offset) 124 { 125 return readl(di->base + offset); 126 } 127 128 static inline void ipu_di_write(struct ipu_di *di, u32 value, unsigned offset) 129 { 130 writel(value, di->base + offset); 131 } 132 133 static void ipu_di_data_wave_config(struct ipu_di *di, 134 int wave_gen, 135 int access_size, int component_size) 136 { 137 u32 reg; 138 reg = (access_size << DI_DW_GEN_ACCESS_SIZE_OFFSET) | 139 (component_size << DI_DW_GEN_COMPONENT_SIZE_OFFSET); 140 ipu_di_write(di, reg, DI_DW_GEN(wave_gen)); 141 } 142 143 static void ipu_di_data_pin_config(struct ipu_di *di, int wave_gen, int di_pin, 144 int set, int up, int down) 145 { 146 u32 reg; 147 148 reg = ipu_di_read(di, DI_DW_GEN(wave_gen)); 149 reg &= ~(0x3 << (di_pin * 2)); 150 reg |= set << (di_pin * 2); 151 ipu_di_write(di, reg, DI_DW_GEN(wave_gen)); 152 153 ipu_di_write(di, (down << 16) | up, DI_DW_SET(wave_gen, set)); 154 } 155 156 static void ipu_di_sync_config(struct ipu_di *di, struct di_sync_config *config, 157 int start, int count) 158 { 159 u32 reg; 160 int i; 161 162 for (i = 0; i < count; i++) { 163 struct di_sync_config *c = &config[i]; 164 int wave_gen = start + i + 1; 165 166 if ((c->run_count >= 0x1000) || (c->offset_count >= 0x1000) || 167 (c->repeat_count >= 0x1000) || 168 (c->cnt_up >= 0x400) || 169 (c->cnt_down >= 0x400)) { 170 dev_err(di->ipu->dev, "DI%d counters out of range.\n", 171 di->id); 172 return; 173 } 174 175 reg = DI_SW_GEN0_RUN_COUNT(c->run_count) | 176 DI_SW_GEN0_RUN_SRC(c->run_src) | 177 DI_SW_GEN0_OFFSET_COUNT(c->offset_count) | 178 DI_SW_GEN0_OFFSET_SRC(c->offset_src); 179 ipu_di_write(di, reg, DI_SW_GEN0(wave_gen)); 180 181 reg = DI_SW_GEN1_CNT_POL_GEN_EN(c->cnt_polarity_gen_en) | 182 DI_SW_GEN1_CNT_CLR_SRC(c->cnt_clr_src) | 183 DI_SW_GEN1_CNT_POL_TRIGGER_SRC( 184 c->cnt_polarity_trigger_src) | 185 DI_SW_GEN1_CNT_POL_CLR_SRC(c->cnt_polarity_clr_src) | 186 DI_SW_GEN1_CNT_DOWN(c->cnt_down) | 187 DI_SW_GEN1_CNT_UP(c->cnt_up); 188 189 /* Enable auto reload */ 190 if (c->repeat_count == 0) 191 reg |= DI_SW_GEN1_AUTO_RELOAD; 192 193 ipu_di_write(di, reg, DI_SW_GEN1(wave_gen)); 194 195 reg = ipu_di_read(di, DI_STP_REP(wave_gen)); 196 reg &= ~(0xffff << (16 * ((wave_gen - 1) & 0x1))); 197 reg |= c->repeat_count << (16 * ((wave_gen - 1) & 0x1)); 198 ipu_di_write(di, reg, DI_STP_REP(wave_gen)); 199 } 200 } 201 202 static void ipu_di_sync_config_interlaced(struct ipu_di *di, 203 struct ipu_di_signal_cfg *sig) 204 { 205 u32 h_total = sig->mode.hactive + sig->mode.hsync_len + 206 sig->mode.hback_porch + sig->mode.hfront_porch; 207 u32 v_total = sig->mode.vactive + sig->mode.vsync_len + 208 sig->mode.vback_porch + sig->mode.vfront_porch; 209 struct di_sync_config cfg[] = { 210 { 211 /* 1: internal VSYNC for each frame */ 212 .run_count = v_total * 2 - 1, 213 .run_src = 3, /* == counter 7 */ 214 }, { 215 /* PIN2: HSYNC waveform */ 216 .run_count = h_total - 1, 217 .run_src = DI_SYNC_CLK, 218 .cnt_polarity_gen_en = 1, 219 .cnt_polarity_trigger_src = DI_SYNC_CLK, 220 .cnt_down = sig->mode.hsync_len * 2, 221 }, { 222 /* PIN3: VSYNC waveform */ 223 .run_count = v_total - 1, 224 .run_src = 4, /* == counter 7 */ 225 .cnt_polarity_gen_en = 1, 226 .cnt_polarity_trigger_src = 4, /* == counter 7 */ 227 .cnt_down = sig->mode.vsync_len * 2, 228 .cnt_clr_src = DI_SYNC_CNT1, 229 }, { 230 /* 4: Field */ 231 .run_count = v_total / 2, 232 .run_src = DI_SYNC_HSYNC, 233 .offset_count = h_total / 2, 234 .offset_src = DI_SYNC_CLK, 235 .repeat_count = 2, 236 .cnt_clr_src = DI_SYNC_CNT1, 237 }, { 238 /* 5: Active lines */ 239 .run_src = DI_SYNC_HSYNC, 240 .offset_count = (sig->mode.vsync_len + 241 sig->mode.vback_porch) / 2, 242 .offset_src = DI_SYNC_HSYNC, 243 .repeat_count = sig->mode.vactive / 2, 244 .cnt_clr_src = DI_SYNC_CNT4, 245 }, { 246 /* 6: Active pixel, referenced by DC */ 247 .run_src = DI_SYNC_CLK, 248 .offset_count = sig->mode.hsync_len + 249 sig->mode.hback_porch, 250 .offset_src = DI_SYNC_CLK, 251 .repeat_count = sig->mode.hactive, 252 .cnt_clr_src = DI_SYNC_CNT5, 253 }, { 254 /* 7: Half line HSYNC */ 255 .run_count = h_total / 2 - 1, 256 .run_src = DI_SYNC_CLK, 257 } 258 }; 259 260 ipu_di_sync_config(di, cfg, 0, ARRAY_SIZE(cfg)); 261 262 ipu_di_write(di, v_total / 2 - 1, DI_SCR_CONF); 263 } 264 265 static void ipu_di_sync_config_noninterlaced(struct ipu_di *di, 266 struct ipu_di_signal_cfg *sig, int div) 267 { 268 u32 h_total = sig->mode.hactive + sig->mode.hsync_len + 269 sig->mode.hback_porch + sig->mode.hfront_porch; 270 u32 v_total = sig->mode.vactive + sig->mode.vsync_len + 271 sig->mode.vback_porch + sig->mode.vfront_porch; 272 struct di_sync_config cfg[] = { 273 { 274 /* 1: INT_HSYNC */ 275 .run_count = h_total - 1, 276 .run_src = DI_SYNC_CLK, 277 } , { 278 /* PIN2: HSYNC */ 279 .run_count = h_total - 1, 280 .run_src = DI_SYNC_CLK, 281 .offset_count = div * sig->v_to_h_sync, 282 .offset_src = DI_SYNC_CLK, 283 .cnt_polarity_gen_en = 1, 284 .cnt_polarity_trigger_src = DI_SYNC_CLK, 285 .cnt_down = sig->mode.hsync_len * 2, 286 } , { 287 /* PIN3: VSYNC */ 288 .run_count = v_total - 1, 289 .run_src = DI_SYNC_INT_HSYNC, 290 .cnt_polarity_gen_en = 1, 291 .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC, 292 .cnt_down = sig->mode.vsync_len * 2, 293 } , { 294 /* 4: Line Active */ 295 .run_src = DI_SYNC_HSYNC, 296 .offset_count = sig->mode.vsync_len + 297 sig->mode.vback_porch, 298 .offset_src = DI_SYNC_HSYNC, 299 .repeat_count = sig->mode.vactive, 300 .cnt_clr_src = DI_SYNC_VSYNC, 301 } , { 302 /* 5: Pixel Active, referenced by DC */ 303 .run_src = DI_SYNC_CLK, 304 .offset_count = sig->mode.hsync_len + 305 sig->mode.hback_porch, 306 .offset_src = DI_SYNC_CLK, 307 .repeat_count = sig->mode.hactive, 308 .cnt_clr_src = 5, /* Line Active */ 309 } , { 310 /* unused */ 311 } , { 312 /* unused */ 313 }, 314 }; 315 /* can't use #7 and #8 for line active and pixel active counters */ 316 struct di_sync_config cfg_vga[] = { 317 { 318 /* 1: INT_HSYNC */ 319 .run_count = h_total - 1, 320 .run_src = DI_SYNC_CLK, 321 } , { 322 /* 2: VSYNC */ 323 .run_count = v_total - 1, 324 .run_src = DI_SYNC_INT_HSYNC, 325 } , { 326 /* 3: Line Active */ 327 .run_src = DI_SYNC_INT_HSYNC, 328 .offset_count = sig->mode.vsync_len + 329 sig->mode.vback_porch, 330 .offset_src = DI_SYNC_INT_HSYNC, 331 .repeat_count = sig->mode.vactive, 332 .cnt_clr_src = 3 /* VSYNC */, 333 } , { 334 /* PIN4: HSYNC for VGA via TVEv2 on TQ MBa53 */ 335 .run_count = h_total - 1, 336 .run_src = DI_SYNC_CLK, 337 .offset_count = div * sig->v_to_h_sync + 18, /* magic value from Freescale TVE driver */ 338 .offset_src = DI_SYNC_CLK, 339 .cnt_polarity_gen_en = 1, 340 .cnt_polarity_trigger_src = DI_SYNC_CLK, 341 .cnt_down = sig->mode.hsync_len * 2, 342 } , { 343 /* 5: Pixel Active signal to DC */ 344 .run_src = DI_SYNC_CLK, 345 .offset_count = sig->mode.hsync_len + 346 sig->mode.hback_porch, 347 .offset_src = DI_SYNC_CLK, 348 .repeat_count = sig->mode.hactive, 349 .cnt_clr_src = 4, /* Line Active */ 350 } , { 351 /* PIN6: VSYNC for VGA via TVEv2 on TQ MBa53 */ 352 .run_count = v_total - 1, 353 .run_src = DI_SYNC_INT_HSYNC, 354 .offset_count = 1, /* magic value from Freescale TVE driver */ 355 .offset_src = DI_SYNC_INT_HSYNC, 356 .cnt_polarity_gen_en = 1, 357 .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC, 358 .cnt_down = sig->mode.vsync_len * 2, 359 } , { 360 /* PIN4: HSYNC for VGA via TVEv2 on i.MX53-QSB */ 361 .run_count = h_total - 1, 362 .run_src = DI_SYNC_CLK, 363 .offset_count = div * sig->v_to_h_sync + 18, /* magic value from Freescale TVE driver */ 364 .offset_src = DI_SYNC_CLK, 365 .cnt_polarity_gen_en = 1, 366 .cnt_polarity_trigger_src = DI_SYNC_CLK, 367 .cnt_down = sig->mode.hsync_len * 2, 368 } , { 369 /* PIN6: VSYNC for VGA via TVEv2 on i.MX53-QSB */ 370 .run_count = v_total - 1, 371 .run_src = DI_SYNC_INT_HSYNC, 372 .offset_count = 1, /* magic value from Freescale TVE driver */ 373 .offset_src = DI_SYNC_INT_HSYNC, 374 .cnt_polarity_gen_en = 1, 375 .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC, 376 .cnt_down = sig->mode.vsync_len * 2, 377 } , { 378 /* unused */ 379 }, 380 }; 381 382 ipu_di_write(di, v_total - 1, DI_SCR_CONF); 383 if (sig->hsync_pin == 2 && sig->vsync_pin == 3) 384 ipu_di_sync_config(di, cfg, 0, ARRAY_SIZE(cfg)); 385 else 386 ipu_di_sync_config(di, cfg_vga, 0, ARRAY_SIZE(cfg_vga)); 387 } 388 389 static void ipu_di_config_clock(struct ipu_di *di, 390 const struct ipu_di_signal_cfg *sig) 391 { 392 struct clk *clk; 393 unsigned clkgen0; 394 uint32_t val; 395 396 if (sig->clkflags & IPU_DI_CLKMODE_EXT) { 397 /* 398 * CLKMODE_EXT means we must use the DI clock: this is 399 * needed for things like LVDS which needs to feed the 400 * DI and LDB with the same pixel clock. 401 */ 402 clk = di->clk_di; 403 404 if (sig->clkflags & IPU_DI_CLKMODE_SYNC) { 405 /* 406 * CLKMODE_SYNC means that we want the DI to be 407 * clocked at the same rate as the parent clock. 408 * This is needed (eg) for LDB which needs to be 409 * fed with the same pixel clock. We assume that 410 * the LDB clock has already been set correctly. 411 */ 412 clkgen0 = 1 << 4; 413 } else { 414 /* 415 * We can use the divider. We should really have 416 * a flag here indicating whether the bridge can 417 * cope with a fractional divider or not. For the 418 * time being, let's go for simplicitly and 419 * reliability. 420 */ 421 unsigned long in_rate; 422 unsigned div; 423 424 clk_set_rate(clk, sig->mode.pixelclock); 425 426 in_rate = clk_get_rate(clk); 427 div = DIV_ROUND_CLOSEST(in_rate, sig->mode.pixelclock); 428 div = clamp(div, 1U, 255U); 429 430 clkgen0 = div << 4; 431 } 432 } else { 433 /* 434 * For other interfaces, we can arbitarily select between 435 * the DI specific clock and the internal IPU clock. See 436 * DI_GENERAL bit 20. We select the IPU clock if it can 437 * give us a clock rate within 1% of the requested frequency, 438 * otherwise we use the DI clock. 439 */ 440 unsigned long rate, clkrate; 441 unsigned div, error; 442 443 clkrate = clk_get_rate(di->clk_ipu); 444 div = DIV_ROUND_CLOSEST(clkrate, sig->mode.pixelclock); 445 div = clamp(div, 1U, 255U); 446 rate = clkrate / div; 447 448 error = rate / (sig->mode.pixelclock / 1000); 449 450 dev_dbg(di->ipu->dev, " IPU clock can give %lu with divider %u, error %d.%u%%\n", 451 rate, div, (signed)(error - 1000) / 10, error % 10); 452 453 /* Allow a 1% error */ 454 if (error < 1010 && error >= 990) { 455 clk = di->clk_ipu; 456 457 clkgen0 = div << 4; 458 } else { 459 unsigned long in_rate; 460 unsigned div; 461 462 clk = di->clk_di; 463 464 clk_set_rate(clk, sig->mode.pixelclock); 465 466 in_rate = clk_get_rate(clk); 467 div = DIV_ROUND_CLOSEST(in_rate, sig->mode.pixelclock); 468 div = clamp(div, 1U, 255U); 469 470 clkgen0 = div << 4; 471 } 472 } 473 474 di->clk_di_pixel = clk; 475 476 /* Set the divider */ 477 ipu_di_write(di, clkgen0, DI_BS_CLKGEN0); 478 479 /* 480 * Set the high/low periods. Bits 24:16 give us the falling edge, 481 * and bits 8:0 give the rising edge. LSB is fraction, and is 482 * based on the divider above. We want a 50% duty cycle, so set 483 * the falling edge to be half the divider. 484 */ 485 ipu_di_write(di, (clkgen0 >> 4) << 16, DI_BS_CLKGEN1); 486 487 /* Finally select the input clock */ 488 val = ipu_di_read(di, DI_GENERAL) & ~DI_GEN_DI_CLK_EXT; 489 if (clk == di->clk_di) 490 val |= DI_GEN_DI_CLK_EXT; 491 ipu_di_write(di, val, DI_GENERAL); 492 493 dev_dbg(di->ipu->dev, "Want %luHz IPU %luHz DI %luHz using %s, %luHz\n", 494 sig->mode.pixelclock, 495 clk_get_rate(di->clk_ipu), 496 clk_get_rate(di->clk_di), 497 clk == di->clk_di ? "DI" : "IPU", 498 clk_get_rate(di->clk_di_pixel) / (clkgen0 >> 4)); 499 } 500 501 /* 502 * This function is called to adjust a video mode to IPU restrictions. 503 * It is meant to be called from drm crtc mode_fixup() methods. 504 */ 505 int ipu_di_adjust_videomode(struct ipu_di *di, struct videomode *mode) 506 { 507 u32 diff; 508 509 if (mode->vfront_porch >= 2) 510 return 0; 511 512 diff = 2 - mode->vfront_porch; 513 514 if (mode->vback_porch >= diff) { 515 mode->vfront_porch = 2; 516 mode->vback_porch -= diff; 517 } else if (mode->vsync_len > diff) { 518 mode->vfront_porch = 2; 519 mode->vsync_len = mode->vsync_len - diff; 520 } else { 521 dev_warn(di->ipu->dev, "failed to adjust videomode\n"); 522 return -EINVAL; 523 } 524 525 dev_dbg(di->ipu->dev, "videomode adapted for IPU restrictions\n"); 526 return 0; 527 } 528 EXPORT_SYMBOL_GPL(ipu_di_adjust_videomode); 529 530 static u32 ipu_di_gen_polarity(int pin) 531 { 532 switch (pin) { 533 case 1: 534 return DI_GEN_POLARITY_1; 535 case 2: 536 return DI_GEN_POLARITY_2; 537 case 3: 538 return DI_GEN_POLARITY_3; 539 case 4: 540 return DI_GEN_POLARITY_4; 541 case 5: 542 return DI_GEN_POLARITY_5; 543 case 6: 544 return DI_GEN_POLARITY_6; 545 case 7: 546 return DI_GEN_POLARITY_7; 547 case 8: 548 return DI_GEN_POLARITY_8; 549 } 550 return 0; 551 } 552 553 int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig) 554 { 555 u32 reg; 556 u32 di_gen, vsync_cnt; 557 u32 div; 558 559 dev_dbg(di->ipu->dev, "disp %d: panel size = %d x %d\n", 560 di->id, sig->mode.hactive, sig->mode.vactive); 561 562 dev_dbg(di->ipu->dev, "Clocks: IPU %luHz DI %luHz Needed %luHz\n", 563 clk_get_rate(di->clk_ipu), 564 clk_get_rate(di->clk_di), 565 sig->mode.pixelclock); 566 567 mutex_lock(&di_mutex); 568 569 ipu_di_config_clock(di, sig); 570 571 div = ipu_di_read(di, DI_BS_CLKGEN0) & 0xfff; 572 div = div / 16; /* Now divider is integer portion */ 573 574 /* Setup pixel clock timing */ 575 /* Down time is half of period */ 576 ipu_di_write(di, (div << 16), DI_BS_CLKGEN1); 577 578 ipu_di_data_wave_config(di, SYNC_WAVE, div - 1, div - 1); 579 ipu_di_data_pin_config(di, SYNC_WAVE, DI_PIN15, 3, 0, div * 2); 580 581 di_gen = ipu_di_read(di, DI_GENERAL) & DI_GEN_DI_CLK_EXT; 582 di_gen |= DI_GEN_DI_VSYNC_EXT; 583 584 if (sig->mode.flags & DISPLAY_FLAGS_INTERLACED) { 585 ipu_di_sync_config_interlaced(di, sig); 586 587 /* set y_sel = 1 */ 588 di_gen |= 0x10000000; 589 590 vsync_cnt = 3; 591 } else { 592 ipu_di_sync_config_noninterlaced(di, sig, div); 593 594 vsync_cnt = 3; 595 if (di->id == 1) 596 /* 597 * TODO: change only for TVEv2, parallel display 598 * uses pin 2 / 3 599 */ 600 if (!(sig->hsync_pin == 2 && sig->vsync_pin == 3)) 601 vsync_cnt = 6; 602 } 603 604 if (sig->mode.flags & DISPLAY_FLAGS_HSYNC_HIGH) 605 di_gen |= ipu_di_gen_polarity(sig->hsync_pin); 606 if (sig->mode.flags & DISPLAY_FLAGS_VSYNC_HIGH) 607 di_gen |= ipu_di_gen_polarity(sig->vsync_pin); 608 609 if (sig->clk_pol) 610 di_gen |= DI_GEN_POLARITY_DISP_CLK; 611 612 ipu_di_write(di, di_gen, DI_GENERAL); 613 614 ipu_di_write(di, (--vsync_cnt << DI_VSYNC_SEL_OFFSET) | 0x00000002, 615 DI_SYNC_AS_GEN); 616 617 reg = ipu_di_read(di, DI_POL); 618 reg &= ~(DI_POL_DRDY_DATA_POLARITY | DI_POL_DRDY_POLARITY_15); 619 620 if (sig->enable_pol) 621 reg |= DI_POL_DRDY_POLARITY_15; 622 if (sig->data_pol) 623 reg |= DI_POL_DRDY_DATA_POLARITY; 624 625 ipu_di_write(di, reg, DI_POL); 626 627 mutex_unlock(&di_mutex); 628 629 return 0; 630 } 631 EXPORT_SYMBOL_GPL(ipu_di_init_sync_panel); 632 633 int ipu_di_enable(struct ipu_di *di) 634 { 635 int ret; 636 637 WARN_ON(IS_ERR(di->clk_di_pixel)); 638 639 ret = clk_prepare_enable(di->clk_di_pixel); 640 if (ret) 641 return ret; 642 643 ipu_module_enable(di->ipu, di->module); 644 645 return 0; 646 } 647 EXPORT_SYMBOL_GPL(ipu_di_enable); 648 649 int ipu_di_disable(struct ipu_di *di) 650 { 651 WARN_ON(IS_ERR(di->clk_di_pixel)); 652 653 ipu_module_disable(di->ipu, di->module); 654 655 clk_disable_unprepare(di->clk_di_pixel); 656 657 return 0; 658 } 659 EXPORT_SYMBOL_GPL(ipu_di_disable); 660 661 int ipu_di_get_num(struct ipu_di *di) 662 { 663 return di->id; 664 } 665 EXPORT_SYMBOL_GPL(ipu_di_get_num); 666 667 static DEFINE_MUTEX(ipu_di_lock); 668 669 struct ipu_di *ipu_di_get(struct ipu_soc *ipu, int disp) 670 { 671 struct ipu_di *di; 672 673 if (disp > 1) 674 return ERR_PTR(-EINVAL); 675 676 di = ipu->di_priv[disp]; 677 678 mutex_lock(&ipu_di_lock); 679 680 if (di->inuse) { 681 di = ERR_PTR(-EBUSY); 682 goto out; 683 } 684 685 di->inuse = true; 686 out: 687 mutex_unlock(&ipu_di_lock); 688 689 return di; 690 } 691 EXPORT_SYMBOL_GPL(ipu_di_get); 692 693 void ipu_di_put(struct ipu_di *di) 694 { 695 mutex_lock(&ipu_di_lock); 696 697 di->inuse = false; 698 699 mutex_unlock(&ipu_di_lock); 700 } 701 EXPORT_SYMBOL_GPL(ipu_di_put); 702 703 int ipu_di_init(struct ipu_soc *ipu, struct device *dev, int id, 704 unsigned long base, 705 u32 module, struct clk *clk_ipu) 706 { 707 struct ipu_di *di; 708 709 if (id > 1) 710 return -ENODEV; 711 712 di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL); 713 if (!di) 714 return -ENOMEM; 715 716 ipu->di_priv[id] = di; 717 718 di->clk_di = devm_clk_get(dev, id ? "di1" : "di0"); 719 if (IS_ERR(di->clk_di)) 720 return PTR_ERR(di->clk_di); 721 722 di->module = module; 723 di->id = id; 724 di->clk_ipu = clk_ipu; 725 di->base = devm_ioremap(dev, base, PAGE_SIZE); 726 if (!di->base) 727 return -ENOMEM; 728 729 ipu_di_write(di, 0x10, DI_BS_CLKGEN0); 730 731 dev_dbg(dev, "DI%d base: 0x%08lx remapped to %p\n", 732 id, base, di->base); 733 di->inuse = false; 734 di->ipu = ipu; 735 736 return 0; 737 } 738 739 void ipu_di_exit(struct ipu_soc *ipu, int id) 740 { 741 } 742