1 /* 2 * Copyright (c) 2010 Sascha Hauer <s.hauer@pengutronix.de> 3 * Copyright (C) 2005-2009 Freescale Semiconductor, Inc. 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License as published by the 7 * Free Software Foundation; either version 2 of the License, or (at your 8 * option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, but 11 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY 12 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License 13 * for more details. 14 */ 15 #include <linux/export.h> 16 #include <linux/module.h> 17 #include <linux/types.h> 18 #include <linux/errno.h> 19 #include <linux/io.h> 20 #include <linux/err.h> 21 #include <linux/platform_device.h> 22 23 #include <video/imx-ipu-v3.h> 24 #include "ipu-prv.h" 25 26 struct ipu_di { 27 void __iomem *base; 28 int id; 29 u32 module; 30 struct clk *clk_di; /* display input clock */ 31 struct clk *clk_ipu; /* IPU bus clock */ 32 struct clk *clk_di_pixel; /* resulting pixel clock */ 33 bool inuse; 34 struct ipu_soc *ipu; 35 }; 36 37 static DEFINE_MUTEX(di_mutex); 38 39 struct di_sync_config { 40 int run_count; 41 int run_src; 42 int offset_count; 43 int offset_src; 44 int repeat_count; 45 int cnt_clr_src; 46 int cnt_polarity_gen_en; 47 int cnt_polarity_clr_src; 48 int cnt_polarity_trigger_src; 49 int cnt_up; 50 int cnt_down; 51 }; 52 53 enum di_pins { 54 DI_PIN11 = 0, 55 DI_PIN12 = 1, 56 DI_PIN13 = 2, 57 DI_PIN14 = 3, 58 DI_PIN15 = 4, 59 DI_PIN16 = 5, 60 DI_PIN17 = 6, 61 DI_PIN_CS = 7, 62 63 DI_PIN_SER_CLK = 0, 64 DI_PIN_SER_RS = 1, 65 }; 66 67 enum di_sync_wave { 68 DI_SYNC_NONE = 0, 69 DI_SYNC_CLK = 1, 70 DI_SYNC_INT_HSYNC = 2, 71 DI_SYNC_HSYNC = 3, 72 DI_SYNC_VSYNC = 4, 73 DI_SYNC_DE = 6, 74 75 DI_SYNC_CNT1 = 2, /* counter >= 2 only */ 76 DI_SYNC_CNT4 = 5, /* counter >= 5 only */ 77 DI_SYNC_CNT5 = 6, /* counter >= 6 only */ 78 }; 79 80 #define SYNC_WAVE 0 81 82 #define DI_GENERAL 0x0000 83 #define DI_BS_CLKGEN0 0x0004 84 #define DI_BS_CLKGEN1 0x0008 85 #define DI_SW_GEN0(gen) (0x000c + 4 * ((gen) - 1)) 86 #define DI_SW_GEN1(gen) (0x0030 + 4 * ((gen) - 1)) 87 #define DI_STP_REP(gen) (0x0148 + 4 * (((gen) - 1)/2)) 88 #define DI_SYNC_AS_GEN 0x0054 89 #define DI_DW_GEN(gen) (0x0058 + 4 * (gen)) 90 #define DI_DW_SET(gen, set) (0x0088 + 4 * ((gen) + 0xc * (set))) 91 #define DI_SER_CONF 0x015c 92 #define DI_SSC 0x0160 93 #define DI_POL 0x0164 94 #define DI_AW0 0x0168 95 #define DI_AW1 0x016c 96 #define DI_SCR_CONF 0x0170 97 #define DI_STAT 0x0174 98 99 #define DI_SW_GEN0_RUN_COUNT(x) ((x) << 19) 100 #define DI_SW_GEN0_RUN_SRC(x) ((x) << 16) 101 #define DI_SW_GEN0_OFFSET_COUNT(x) ((x) << 3) 102 #define DI_SW_GEN0_OFFSET_SRC(x) ((x) << 0) 103 104 #define DI_SW_GEN1_CNT_POL_GEN_EN(x) ((x) << 29) 105 #define DI_SW_GEN1_CNT_CLR_SRC(x) ((x) << 25) 106 #define DI_SW_GEN1_CNT_POL_TRIGGER_SRC(x) ((x) << 12) 107 #define DI_SW_GEN1_CNT_POL_CLR_SRC(x) ((x) << 9) 108 #define DI_SW_GEN1_CNT_DOWN(x) ((x) << 16) 109 #define DI_SW_GEN1_CNT_UP(x) (x) 110 #define DI_SW_GEN1_AUTO_RELOAD (0x10000000) 111 112 #define DI_DW_GEN_ACCESS_SIZE_OFFSET 24 113 #define DI_DW_GEN_COMPONENT_SIZE_OFFSET 16 114 115 #define DI_GEN_POLARITY_1 (1 << 0) 116 #define DI_GEN_POLARITY_2 (1 << 1) 117 #define DI_GEN_POLARITY_3 (1 << 2) 118 #define DI_GEN_POLARITY_4 (1 << 3) 119 #define DI_GEN_POLARITY_5 (1 << 4) 120 #define DI_GEN_POLARITY_6 (1 << 5) 121 #define DI_GEN_POLARITY_7 (1 << 6) 122 #define DI_GEN_POLARITY_8 (1 << 7) 123 #define DI_GEN_POLARITY_DISP_CLK (1 << 17) 124 #define DI_GEN_DI_CLK_EXT (1 << 20) 125 #define DI_GEN_DI_VSYNC_EXT (1 << 21) 126 127 #define DI_POL_DRDY_DATA_POLARITY (1 << 7) 128 #define DI_POL_DRDY_POLARITY_15 (1 << 4) 129 130 #define DI_VSYNC_SEL_OFFSET 13 131 132 static inline u32 ipu_di_read(struct ipu_di *di, unsigned offset) 133 { 134 return readl(di->base + offset); 135 } 136 137 static inline void ipu_di_write(struct ipu_di *di, u32 value, unsigned offset) 138 { 139 writel(value, di->base + offset); 140 } 141 142 static void ipu_di_data_wave_config(struct ipu_di *di, 143 int wave_gen, 144 int access_size, int component_size) 145 { 146 u32 reg; 147 reg = (access_size << DI_DW_GEN_ACCESS_SIZE_OFFSET) | 148 (component_size << DI_DW_GEN_COMPONENT_SIZE_OFFSET); 149 ipu_di_write(di, reg, DI_DW_GEN(wave_gen)); 150 } 151 152 static void ipu_di_data_pin_config(struct ipu_di *di, int wave_gen, int di_pin, 153 int set, int up, int down) 154 { 155 u32 reg; 156 157 reg = ipu_di_read(di, DI_DW_GEN(wave_gen)); 158 reg &= ~(0x3 << (di_pin * 2)); 159 reg |= set << (di_pin * 2); 160 ipu_di_write(di, reg, DI_DW_GEN(wave_gen)); 161 162 ipu_di_write(di, (down << 16) | up, DI_DW_SET(wave_gen, set)); 163 } 164 165 static void ipu_di_sync_config(struct ipu_di *di, struct di_sync_config *config, 166 int start, int count) 167 { 168 u32 reg; 169 int i; 170 171 for (i = 0; i < count; i++) { 172 struct di_sync_config *c = &config[i]; 173 int wave_gen = start + i + 1; 174 175 if ((c->run_count >= 0x1000) || (c->offset_count >= 0x1000) || 176 (c->repeat_count >= 0x1000) || 177 (c->cnt_up >= 0x400) || 178 (c->cnt_down >= 0x400)) { 179 dev_err(di->ipu->dev, "DI%d counters out of range.\n", 180 di->id); 181 return; 182 } 183 184 reg = DI_SW_GEN0_RUN_COUNT(c->run_count) | 185 DI_SW_GEN0_RUN_SRC(c->run_src) | 186 DI_SW_GEN0_OFFSET_COUNT(c->offset_count) | 187 DI_SW_GEN0_OFFSET_SRC(c->offset_src); 188 ipu_di_write(di, reg, DI_SW_GEN0(wave_gen)); 189 190 reg = DI_SW_GEN1_CNT_POL_GEN_EN(c->cnt_polarity_gen_en) | 191 DI_SW_GEN1_CNT_CLR_SRC(c->cnt_clr_src) | 192 DI_SW_GEN1_CNT_POL_TRIGGER_SRC( 193 c->cnt_polarity_trigger_src) | 194 DI_SW_GEN1_CNT_POL_CLR_SRC(c->cnt_polarity_clr_src) | 195 DI_SW_GEN1_CNT_DOWN(c->cnt_down) | 196 DI_SW_GEN1_CNT_UP(c->cnt_up); 197 198 /* Enable auto reload */ 199 if (c->repeat_count == 0) 200 reg |= DI_SW_GEN1_AUTO_RELOAD; 201 202 ipu_di_write(di, reg, DI_SW_GEN1(wave_gen)); 203 204 reg = ipu_di_read(di, DI_STP_REP(wave_gen)); 205 reg &= ~(0xffff << (16 * ((wave_gen - 1) & 0x1))); 206 reg |= c->repeat_count << (16 * ((wave_gen - 1) & 0x1)); 207 ipu_di_write(di, reg, DI_STP_REP(wave_gen)); 208 } 209 } 210 211 static void ipu_di_sync_config_interlaced(struct ipu_di *di, 212 struct ipu_di_signal_cfg *sig) 213 { 214 u32 h_total = sig->mode.hactive + sig->mode.hsync_len + 215 sig->mode.hback_porch + sig->mode.hfront_porch; 216 u32 v_total = sig->mode.vactive + sig->mode.vsync_len + 217 sig->mode.vback_porch + sig->mode.vfront_porch; 218 struct di_sync_config cfg[] = { 219 { 220 /* 1: internal VSYNC for each frame */ 221 .run_count = v_total * 2 - 1, 222 .run_src = 3, /* == counter 7 */ 223 }, { 224 /* PIN2: HSYNC waveform */ 225 .run_count = h_total - 1, 226 .run_src = DI_SYNC_CLK, 227 .cnt_polarity_gen_en = 1, 228 .cnt_polarity_trigger_src = DI_SYNC_CLK, 229 .cnt_down = sig->mode.hsync_len * 2, 230 }, { 231 /* PIN3: VSYNC waveform */ 232 .run_count = v_total - 1, 233 .run_src = 4, /* == counter 7 */ 234 .cnt_polarity_gen_en = 1, 235 .cnt_polarity_trigger_src = 4, /* == counter 7 */ 236 .cnt_down = sig->mode.vsync_len * 2, 237 .cnt_clr_src = DI_SYNC_CNT1, 238 }, { 239 /* 4: Field */ 240 .run_count = v_total / 2, 241 .run_src = DI_SYNC_HSYNC, 242 .offset_count = h_total / 2, 243 .offset_src = DI_SYNC_CLK, 244 .repeat_count = 2, 245 .cnt_clr_src = DI_SYNC_CNT1, 246 }, { 247 /* 5: Active lines */ 248 .run_src = DI_SYNC_HSYNC, 249 .offset_count = (sig->mode.vsync_len + 250 sig->mode.vback_porch) / 2, 251 .offset_src = DI_SYNC_HSYNC, 252 .repeat_count = sig->mode.vactive / 2, 253 .cnt_clr_src = DI_SYNC_CNT4, 254 }, { 255 /* 6: Active pixel, referenced by DC */ 256 .run_src = DI_SYNC_CLK, 257 .offset_count = sig->mode.hsync_len + 258 sig->mode.hback_porch, 259 .offset_src = DI_SYNC_CLK, 260 .repeat_count = sig->mode.hactive, 261 .cnt_clr_src = DI_SYNC_CNT5, 262 }, { 263 /* 7: Half line HSYNC */ 264 .run_count = h_total / 2 - 1, 265 .run_src = DI_SYNC_CLK, 266 } 267 }; 268 269 ipu_di_sync_config(di, cfg, 0, ARRAY_SIZE(cfg)); 270 271 ipu_di_write(di, v_total / 2 - 1, DI_SCR_CONF); 272 } 273 274 static void ipu_di_sync_config_noninterlaced(struct ipu_di *di, 275 struct ipu_di_signal_cfg *sig, int div) 276 { 277 u32 h_total = sig->mode.hactive + sig->mode.hsync_len + 278 sig->mode.hback_porch + sig->mode.hfront_porch; 279 u32 v_total = sig->mode.vactive + sig->mode.vsync_len + 280 sig->mode.vback_porch + sig->mode.vfront_porch; 281 struct di_sync_config cfg[] = { 282 { 283 /* 1: INT_HSYNC */ 284 .run_count = h_total - 1, 285 .run_src = DI_SYNC_CLK, 286 } , { 287 /* PIN2: HSYNC */ 288 .run_count = h_total - 1, 289 .run_src = DI_SYNC_CLK, 290 .offset_count = div * sig->v_to_h_sync, 291 .offset_src = DI_SYNC_CLK, 292 .cnt_polarity_gen_en = 1, 293 .cnt_polarity_trigger_src = DI_SYNC_CLK, 294 .cnt_down = sig->mode.hsync_len * 2, 295 } , { 296 /* PIN3: VSYNC */ 297 .run_count = v_total - 1, 298 .run_src = DI_SYNC_INT_HSYNC, 299 .cnt_polarity_gen_en = 1, 300 .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC, 301 .cnt_down = sig->mode.vsync_len * 2, 302 } , { 303 /* 4: Line Active */ 304 .run_src = DI_SYNC_HSYNC, 305 .offset_count = sig->mode.vsync_len + 306 sig->mode.vback_porch, 307 .offset_src = DI_SYNC_HSYNC, 308 .repeat_count = sig->mode.vactive, 309 .cnt_clr_src = DI_SYNC_VSYNC, 310 } , { 311 /* 5: Pixel Active, referenced by DC */ 312 .run_src = DI_SYNC_CLK, 313 .offset_count = sig->mode.hsync_len + 314 sig->mode.hback_porch, 315 .offset_src = DI_SYNC_CLK, 316 .repeat_count = sig->mode.hactive, 317 .cnt_clr_src = 5, /* Line Active */ 318 } , { 319 /* unused */ 320 } , { 321 /* unused */ 322 } , { 323 /* unused */ 324 } , { 325 /* unused */ 326 }, 327 }; 328 /* can't use #7 and #8 for line active and pixel active counters */ 329 struct di_sync_config cfg_vga[] = { 330 { 331 /* 1: INT_HSYNC */ 332 .run_count = h_total - 1, 333 .run_src = DI_SYNC_CLK, 334 } , { 335 /* 2: VSYNC */ 336 .run_count = v_total - 1, 337 .run_src = DI_SYNC_INT_HSYNC, 338 } , { 339 /* 3: Line Active */ 340 .run_src = DI_SYNC_INT_HSYNC, 341 .offset_count = sig->mode.vsync_len + 342 sig->mode.vback_porch, 343 .offset_src = DI_SYNC_INT_HSYNC, 344 .repeat_count = sig->mode.vactive, 345 .cnt_clr_src = 3 /* VSYNC */, 346 } , { 347 /* PIN4: HSYNC for VGA via TVEv2 on TQ MBa53 */ 348 .run_count = h_total - 1, 349 .run_src = DI_SYNC_CLK, 350 .offset_count = div * sig->v_to_h_sync + 18, /* magic value from Freescale TVE driver */ 351 .offset_src = DI_SYNC_CLK, 352 .cnt_polarity_gen_en = 1, 353 .cnt_polarity_trigger_src = DI_SYNC_CLK, 354 .cnt_down = sig->mode.hsync_len * 2, 355 } , { 356 /* 5: Pixel Active signal to DC */ 357 .run_src = DI_SYNC_CLK, 358 .offset_count = sig->mode.hsync_len + 359 sig->mode.hback_porch, 360 .offset_src = DI_SYNC_CLK, 361 .repeat_count = sig->mode.hactive, 362 .cnt_clr_src = 4, /* Line Active */ 363 } , { 364 /* PIN6: VSYNC for VGA via TVEv2 on TQ MBa53 */ 365 .run_count = v_total - 1, 366 .run_src = DI_SYNC_INT_HSYNC, 367 .offset_count = 1, /* magic value from Freescale TVE driver */ 368 .offset_src = DI_SYNC_INT_HSYNC, 369 .cnt_polarity_gen_en = 1, 370 .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC, 371 .cnt_down = sig->mode.vsync_len * 2, 372 } , { 373 /* PIN4: HSYNC for VGA via TVEv2 on i.MX53-QSB */ 374 .run_count = h_total - 1, 375 .run_src = DI_SYNC_CLK, 376 .offset_count = div * sig->v_to_h_sync + 18, /* magic value from Freescale TVE driver */ 377 .offset_src = DI_SYNC_CLK, 378 .cnt_polarity_gen_en = 1, 379 .cnt_polarity_trigger_src = DI_SYNC_CLK, 380 .cnt_down = sig->mode.hsync_len * 2, 381 } , { 382 /* PIN6: VSYNC for VGA via TVEv2 on i.MX53-QSB */ 383 .run_count = v_total - 1, 384 .run_src = DI_SYNC_INT_HSYNC, 385 .offset_count = 1, /* magic value from Freescale TVE driver */ 386 .offset_src = DI_SYNC_INT_HSYNC, 387 .cnt_polarity_gen_en = 1, 388 .cnt_polarity_trigger_src = DI_SYNC_INT_HSYNC, 389 .cnt_down = sig->mode.vsync_len * 2, 390 } , { 391 /* unused */ 392 }, 393 }; 394 395 ipu_di_write(di, v_total - 1, DI_SCR_CONF); 396 if (sig->hsync_pin == 2 && sig->vsync_pin == 3) 397 ipu_di_sync_config(di, cfg, 0, ARRAY_SIZE(cfg)); 398 else 399 ipu_di_sync_config(di, cfg_vga, 0, ARRAY_SIZE(cfg_vga)); 400 } 401 402 static void ipu_di_config_clock(struct ipu_di *di, 403 const struct ipu_di_signal_cfg *sig) 404 { 405 struct clk *clk; 406 unsigned clkgen0; 407 uint32_t val; 408 409 if (sig->clkflags & IPU_DI_CLKMODE_EXT) { 410 /* 411 * CLKMODE_EXT means we must use the DI clock: this is 412 * needed for things like LVDS which needs to feed the 413 * DI and LDB with the same pixel clock. 414 */ 415 clk = di->clk_di; 416 417 if (sig->clkflags & IPU_DI_CLKMODE_SYNC) { 418 /* 419 * CLKMODE_SYNC means that we want the DI to be 420 * clocked at the same rate as the parent clock. 421 * This is needed (eg) for LDB which needs to be 422 * fed with the same pixel clock. We assume that 423 * the LDB clock has already been set correctly. 424 */ 425 clkgen0 = 1 << 4; 426 } else { 427 /* 428 * We can use the divider. We should really have 429 * a flag here indicating whether the bridge can 430 * cope with a fractional divider or not. For the 431 * time being, let's go for simplicitly and 432 * reliability. 433 */ 434 unsigned long in_rate; 435 unsigned div; 436 437 clk_set_rate(clk, sig->mode.pixelclock); 438 439 in_rate = clk_get_rate(clk); 440 div = DIV_ROUND_CLOSEST(in_rate, sig->mode.pixelclock); 441 div = clamp(div, 1U, 255U); 442 443 clkgen0 = div << 4; 444 } 445 } else { 446 /* 447 * For other interfaces, we can arbitarily select between 448 * the DI specific clock and the internal IPU clock. See 449 * DI_GENERAL bit 20. We select the IPU clock if it can 450 * give us a clock rate within 1% of the requested frequency, 451 * otherwise we use the DI clock. 452 */ 453 unsigned long rate, clkrate; 454 unsigned div, error; 455 456 clkrate = clk_get_rate(di->clk_ipu); 457 div = DIV_ROUND_CLOSEST(clkrate, sig->mode.pixelclock); 458 div = clamp(div, 1U, 255U); 459 rate = clkrate / div; 460 461 error = rate / (sig->mode.pixelclock / 1000); 462 463 dev_dbg(di->ipu->dev, " IPU clock can give %lu with divider %u, error %d.%u%%\n", 464 rate, div, (signed)(error - 1000) / 10, error % 10); 465 466 /* Allow a 1% error */ 467 if (error < 1010 && error >= 990) { 468 clk = di->clk_ipu; 469 470 clkgen0 = div << 4; 471 } else { 472 unsigned long in_rate; 473 unsigned div; 474 475 clk = di->clk_di; 476 477 clk_set_rate(clk, sig->mode.pixelclock); 478 479 in_rate = clk_get_rate(clk); 480 div = DIV_ROUND_CLOSEST(in_rate, sig->mode.pixelclock); 481 div = clamp(div, 1U, 255U); 482 483 clkgen0 = div << 4; 484 } 485 } 486 487 di->clk_di_pixel = clk; 488 489 /* Set the divider */ 490 ipu_di_write(di, clkgen0, DI_BS_CLKGEN0); 491 492 /* 493 * Set the high/low periods. Bits 24:16 give us the falling edge, 494 * and bits 8:0 give the rising edge. LSB is fraction, and is 495 * based on the divider above. We want a 50% duty cycle, so set 496 * the falling edge to be half the divider. 497 */ 498 ipu_di_write(di, (clkgen0 >> 4) << 16, DI_BS_CLKGEN1); 499 500 /* Finally select the input clock */ 501 val = ipu_di_read(di, DI_GENERAL) & ~DI_GEN_DI_CLK_EXT; 502 if (clk == di->clk_di) 503 val |= DI_GEN_DI_CLK_EXT; 504 ipu_di_write(di, val, DI_GENERAL); 505 506 dev_dbg(di->ipu->dev, "Want %luHz IPU %luHz DI %luHz using %s, %luHz\n", 507 sig->mode.pixelclock, 508 clk_get_rate(di->clk_ipu), 509 clk_get_rate(di->clk_di), 510 clk == di->clk_di ? "DI" : "IPU", 511 clk_get_rate(di->clk_di_pixel) / (clkgen0 >> 4)); 512 } 513 514 /* 515 * This function is called to adjust a video mode to IPU restrictions. 516 * It is meant to be called from drm crtc mode_fixup() methods. 517 */ 518 int ipu_di_adjust_videomode(struct ipu_di *di, struct videomode *mode) 519 { 520 u32 diff; 521 522 if (mode->vfront_porch >= 2) 523 return 0; 524 525 diff = 2 - mode->vfront_porch; 526 527 if (mode->vback_porch >= diff) { 528 mode->vfront_porch = 2; 529 mode->vback_porch -= diff; 530 } else if (mode->vsync_len > diff) { 531 mode->vfront_porch = 2; 532 mode->vsync_len = mode->vsync_len - diff; 533 } else { 534 dev_warn(di->ipu->dev, "failed to adjust videomode\n"); 535 return -EINVAL; 536 } 537 538 dev_dbg(di->ipu->dev, "videomode adapted for IPU restrictions\n"); 539 return 0; 540 } 541 EXPORT_SYMBOL_GPL(ipu_di_adjust_videomode); 542 543 static u32 ipu_di_gen_polarity(int pin) 544 { 545 switch (pin) { 546 case 1: 547 return DI_GEN_POLARITY_1; 548 case 2: 549 return DI_GEN_POLARITY_2; 550 case 3: 551 return DI_GEN_POLARITY_3; 552 case 4: 553 return DI_GEN_POLARITY_4; 554 case 5: 555 return DI_GEN_POLARITY_5; 556 case 6: 557 return DI_GEN_POLARITY_6; 558 case 7: 559 return DI_GEN_POLARITY_7; 560 case 8: 561 return DI_GEN_POLARITY_8; 562 } 563 return 0; 564 } 565 566 int ipu_di_init_sync_panel(struct ipu_di *di, struct ipu_di_signal_cfg *sig) 567 { 568 u32 reg; 569 u32 di_gen, vsync_cnt; 570 u32 div; 571 572 dev_dbg(di->ipu->dev, "disp %d: panel size = %d x %d\n", 573 di->id, sig->mode.hactive, sig->mode.vactive); 574 575 dev_dbg(di->ipu->dev, "Clocks: IPU %luHz DI %luHz Needed %luHz\n", 576 clk_get_rate(di->clk_ipu), 577 clk_get_rate(di->clk_di), 578 sig->mode.pixelclock); 579 580 mutex_lock(&di_mutex); 581 582 ipu_di_config_clock(di, sig); 583 584 div = ipu_di_read(di, DI_BS_CLKGEN0) & 0xfff; 585 div = div / 16; /* Now divider is integer portion */ 586 587 /* Setup pixel clock timing */ 588 /* Down time is half of period */ 589 ipu_di_write(di, (div << 16), DI_BS_CLKGEN1); 590 591 ipu_di_data_wave_config(di, SYNC_WAVE, div - 1, div - 1); 592 ipu_di_data_pin_config(di, SYNC_WAVE, DI_PIN15, 3, 0, div * 2); 593 594 di_gen = ipu_di_read(di, DI_GENERAL) & DI_GEN_DI_CLK_EXT; 595 di_gen |= DI_GEN_DI_VSYNC_EXT; 596 597 if (sig->mode.flags & DISPLAY_FLAGS_INTERLACED) { 598 ipu_di_sync_config_interlaced(di, sig); 599 600 /* set y_sel = 1 */ 601 di_gen |= 0x10000000; 602 603 vsync_cnt = 3; 604 } else { 605 ipu_di_sync_config_noninterlaced(di, sig, div); 606 607 vsync_cnt = 3; 608 if (di->id == 1) 609 /* 610 * TODO: change only for TVEv2, parallel display 611 * uses pin 2 / 3 612 */ 613 if (!(sig->hsync_pin == 2 && sig->vsync_pin == 3)) 614 vsync_cnt = 6; 615 } 616 617 if (sig->mode.flags & DISPLAY_FLAGS_HSYNC_HIGH) 618 di_gen |= ipu_di_gen_polarity(sig->hsync_pin); 619 if (sig->mode.flags & DISPLAY_FLAGS_VSYNC_HIGH) 620 di_gen |= ipu_di_gen_polarity(sig->vsync_pin); 621 622 if (sig->clk_pol) 623 di_gen |= DI_GEN_POLARITY_DISP_CLK; 624 625 ipu_di_write(di, di_gen, DI_GENERAL); 626 627 ipu_di_write(di, (--vsync_cnt << DI_VSYNC_SEL_OFFSET) | 0x00000002, 628 DI_SYNC_AS_GEN); 629 630 reg = ipu_di_read(di, DI_POL); 631 reg &= ~(DI_POL_DRDY_DATA_POLARITY | DI_POL_DRDY_POLARITY_15); 632 633 if (sig->enable_pol) 634 reg |= DI_POL_DRDY_POLARITY_15; 635 if (sig->data_pol) 636 reg |= DI_POL_DRDY_DATA_POLARITY; 637 638 ipu_di_write(di, reg, DI_POL); 639 640 mutex_unlock(&di_mutex); 641 642 return 0; 643 } 644 EXPORT_SYMBOL_GPL(ipu_di_init_sync_panel); 645 646 int ipu_di_enable(struct ipu_di *di) 647 { 648 int ret; 649 650 WARN_ON(IS_ERR(di->clk_di_pixel)); 651 652 ret = clk_prepare_enable(di->clk_di_pixel); 653 if (ret) 654 return ret; 655 656 ipu_module_enable(di->ipu, di->module); 657 658 return 0; 659 } 660 EXPORT_SYMBOL_GPL(ipu_di_enable); 661 662 int ipu_di_disable(struct ipu_di *di) 663 { 664 WARN_ON(IS_ERR(di->clk_di_pixel)); 665 666 ipu_module_disable(di->ipu, di->module); 667 668 clk_disable_unprepare(di->clk_di_pixel); 669 670 return 0; 671 } 672 EXPORT_SYMBOL_GPL(ipu_di_disable); 673 674 int ipu_di_get_num(struct ipu_di *di) 675 { 676 return di->id; 677 } 678 EXPORT_SYMBOL_GPL(ipu_di_get_num); 679 680 static DEFINE_MUTEX(ipu_di_lock); 681 682 struct ipu_di *ipu_di_get(struct ipu_soc *ipu, int disp) 683 { 684 struct ipu_di *di; 685 686 if (disp > 1) 687 return ERR_PTR(-EINVAL); 688 689 di = ipu->di_priv[disp]; 690 691 mutex_lock(&ipu_di_lock); 692 693 if (di->inuse) { 694 di = ERR_PTR(-EBUSY); 695 goto out; 696 } 697 698 di->inuse = true; 699 out: 700 mutex_unlock(&ipu_di_lock); 701 702 return di; 703 } 704 EXPORT_SYMBOL_GPL(ipu_di_get); 705 706 void ipu_di_put(struct ipu_di *di) 707 { 708 mutex_lock(&ipu_di_lock); 709 710 di->inuse = false; 711 712 mutex_unlock(&ipu_di_lock); 713 } 714 EXPORT_SYMBOL_GPL(ipu_di_put); 715 716 int ipu_di_init(struct ipu_soc *ipu, struct device *dev, int id, 717 unsigned long base, 718 u32 module, struct clk *clk_ipu) 719 { 720 struct ipu_di *di; 721 722 if (id > 1) 723 return -ENODEV; 724 725 di = devm_kzalloc(dev, sizeof(*di), GFP_KERNEL); 726 if (!di) 727 return -ENOMEM; 728 729 ipu->di_priv[id] = di; 730 731 di->clk_di = devm_clk_get(dev, id ? "di1" : "di0"); 732 if (IS_ERR(di->clk_di)) 733 return PTR_ERR(di->clk_di); 734 735 di->module = module; 736 di->id = id; 737 di->clk_ipu = clk_ipu; 738 di->base = devm_ioremap(dev, base, PAGE_SIZE); 739 if (!di->base) 740 return -ENOMEM; 741 742 ipu_di_write(di, 0x10, DI_BS_CLKGEN0); 743 744 dev_dbg(dev, "DI%d base: 0x%08lx remapped to %p\n", 745 id, base, di->base); 746 di->inuse = false; 747 di->ipu = ipu; 748 749 return 0; 750 } 751 752 void ipu_di_exit(struct ipu_soc *ipu, int id) 753 { 754 } 755