1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) 2012 Red Hat 4 * 5 * based in parts on udlfb.c: 6 * Copyright (C) 2009 Roberto De Ioris <roberto@unbit.it> 7 * Copyright (C) 2009 Jaya Kumar <jayakumar.lkml@gmail.com> 8 * Copyright (C) 2009 Bernie Thompson <bernie@plugable.com> 9 */ 10 11 #include <drm/drm_atomic_helper.h> 12 #include <drm/drm_crtc_helper.h> 13 #include <drm/drm_damage_helper.h> 14 #include <drm/drm_fourcc.h> 15 #include <drm/drm_gem_atomic_helper.h> 16 #include <drm/drm_gem_framebuffer_helper.h> 17 #include <drm/drm_gem_shmem_helper.h> 18 #include <drm/drm_modeset_helper_vtables.h> 19 #include <drm/drm_vblank.h> 20 21 #include "udl_drv.h" 22 23 #define UDL_COLOR_DEPTH_16BPP 0 24 25 /* 26 * All DisplayLink bulk operations start with 0xAF, followed by specific code 27 * All operations are written to buffers which then later get sent to device 28 */ 29 static char *udl_set_register(char *buf, u8 reg, u8 val) 30 { 31 *buf++ = 0xAF; 32 *buf++ = 0x20; 33 *buf++ = reg; 34 *buf++ = val; 35 return buf; 36 } 37 38 static char *udl_vidreg_lock(char *buf) 39 { 40 return udl_set_register(buf, 0xFF, 0x00); 41 } 42 43 static char *udl_vidreg_unlock(char *buf) 44 { 45 return udl_set_register(buf, 0xFF, 0xFF); 46 } 47 48 static char *udl_set_blank_mode(char *buf, u8 mode) 49 { 50 return udl_set_register(buf, UDL_REG_BLANK_MODE, mode); 51 } 52 53 static char *udl_set_color_depth(char *buf, u8 selection) 54 { 55 return udl_set_register(buf, 0x00, selection); 56 } 57 58 static char *udl_set_base16bpp(char *wrptr, u32 base) 59 { 60 /* the base pointer is 16 bits wide, 0x20 is hi byte. */ 61 wrptr = udl_set_register(wrptr, 0x20, base >> 16); 62 wrptr = udl_set_register(wrptr, 0x21, base >> 8); 63 return udl_set_register(wrptr, 0x22, base); 64 } 65 66 /* 67 * DisplayLink HW has separate 16bpp and 8bpp framebuffers. 68 * In 24bpp modes, the low 323 RGB bits go in the 8bpp framebuffer 69 */ 70 static char *udl_set_base8bpp(char *wrptr, u32 base) 71 { 72 wrptr = udl_set_register(wrptr, 0x26, base >> 16); 73 wrptr = udl_set_register(wrptr, 0x27, base >> 8); 74 return udl_set_register(wrptr, 0x28, base); 75 } 76 77 static char *udl_set_register_16(char *wrptr, u8 reg, u16 value) 78 { 79 wrptr = udl_set_register(wrptr, reg, value >> 8); 80 return udl_set_register(wrptr, reg+1, value); 81 } 82 83 /* 84 * This is kind of weird because the controller takes some 85 * register values in a different byte order than other registers. 86 */ 87 static char *udl_set_register_16be(char *wrptr, u8 reg, u16 value) 88 { 89 wrptr = udl_set_register(wrptr, reg, value); 90 return udl_set_register(wrptr, reg+1, value >> 8); 91 } 92 93 /* 94 * LFSR is linear feedback shift register. The reason we have this is 95 * because the display controller needs to minimize the clock depth of 96 * various counters used in the display path. So this code reverses the 97 * provided value into the lfsr16 value by counting backwards to get 98 * the value that needs to be set in the hardware comparator to get the 99 * same actual count. This makes sense once you read above a couple of 100 * times and think about it from a hardware perspective. 101 */ 102 static u16 udl_lfsr16(u16 actual_count) 103 { 104 u32 lv = 0xFFFF; /* This is the lfsr value that the hw starts with */ 105 106 while (actual_count--) { 107 lv = ((lv << 1) | 108 (((lv >> 15) ^ (lv >> 4) ^ (lv >> 2) ^ (lv >> 1)) & 1)) 109 & 0xFFFF; 110 } 111 112 return (u16) lv; 113 } 114 115 /* 116 * This does LFSR conversion on the value that is to be written. 117 * See LFSR explanation above for more detail. 118 */ 119 static char *udl_set_register_lfsr16(char *wrptr, u8 reg, u16 value) 120 { 121 return udl_set_register_16(wrptr, reg, udl_lfsr16(value)); 122 } 123 124 /* 125 * This takes a standard fbdev screeninfo struct and all of its monitor mode 126 * details and converts them into the DisplayLink equivalent register commands. 127 ERR(vreg(dev, 0x00, (color_depth == 16) ? 0 : 1)); 128 ERR(vreg_lfsr16(dev, 0x01, xDisplayStart)); 129 ERR(vreg_lfsr16(dev, 0x03, xDisplayEnd)); 130 ERR(vreg_lfsr16(dev, 0x05, yDisplayStart)); 131 ERR(vreg_lfsr16(dev, 0x07, yDisplayEnd)); 132 ERR(vreg_lfsr16(dev, 0x09, xEndCount)); 133 ERR(vreg_lfsr16(dev, 0x0B, hSyncStart)); 134 ERR(vreg_lfsr16(dev, 0x0D, hSyncEnd)); 135 ERR(vreg_big_endian(dev, 0x0F, hPixels)); 136 ERR(vreg_lfsr16(dev, 0x11, yEndCount)); 137 ERR(vreg_lfsr16(dev, 0x13, vSyncStart)); 138 ERR(vreg_lfsr16(dev, 0x15, vSyncEnd)); 139 ERR(vreg_big_endian(dev, 0x17, vPixels)); 140 ERR(vreg_little_endian(dev, 0x1B, pixelClock5KHz)); 141 142 ERR(vreg(dev, 0x1F, 0)); 143 144 ERR(vbuf(dev, WRITE_VIDREG_UNLOCK, DSIZEOF(WRITE_VIDREG_UNLOCK))); 145 */ 146 static char *udl_set_vid_cmds(char *wrptr, struct drm_display_mode *mode) 147 { 148 u16 xds, yds; 149 u16 xde, yde; 150 u16 yec; 151 152 /* x display start */ 153 xds = mode->crtc_htotal - mode->crtc_hsync_start; 154 wrptr = udl_set_register_lfsr16(wrptr, 0x01, xds); 155 /* x display end */ 156 xde = xds + mode->crtc_hdisplay; 157 wrptr = udl_set_register_lfsr16(wrptr, 0x03, xde); 158 159 /* y display start */ 160 yds = mode->crtc_vtotal - mode->crtc_vsync_start; 161 wrptr = udl_set_register_lfsr16(wrptr, 0x05, yds); 162 /* y display end */ 163 yde = yds + mode->crtc_vdisplay; 164 wrptr = udl_set_register_lfsr16(wrptr, 0x07, yde); 165 166 /* x end count is active + blanking - 1 */ 167 wrptr = udl_set_register_lfsr16(wrptr, 0x09, 168 mode->crtc_htotal - 1); 169 170 /* libdlo hardcodes hsync start to 1 */ 171 wrptr = udl_set_register_lfsr16(wrptr, 0x0B, 1); 172 173 /* hsync end is width of sync pulse + 1 */ 174 wrptr = udl_set_register_lfsr16(wrptr, 0x0D, 175 mode->crtc_hsync_end - mode->crtc_hsync_start + 1); 176 177 /* hpixels is active pixels */ 178 wrptr = udl_set_register_16(wrptr, 0x0F, mode->hdisplay); 179 180 /* yendcount is vertical active + vertical blanking */ 181 yec = mode->crtc_vtotal; 182 wrptr = udl_set_register_lfsr16(wrptr, 0x11, yec); 183 184 /* libdlo hardcodes vsync start to 0 */ 185 wrptr = udl_set_register_lfsr16(wrptr, 0x13, 0); 186 187 /* vsync end is width of vsync pulse */ 188 wrptr = udl_set_register_lfsr16(wrptr, 0x15, mode->crtc_vsync_end - mode->crtc_vsync_start); 189 190 /* vpixels is active pixels */ 191 wrptr = udl_set_register_16(wrptr, 0x17, mode->crtc_vdisplay); 192 193 wrptr = udl_set_register_16be(wrptr, 0x1B, 194 mode->clock / 5); 195 196 return wrptr; 197 } 198 199 static char *udl_dummy_render(char *wrptr) 200 { 201 *wrptr++ = 0xAF; 202 *wrptr++ = 0x6A; /* copy */ 203 *wrptr++ = 0x00; /* from addr */ 204 *wrptr++ = 0x00; 205 *wrptr++ = 0x00; 206 *wrptr++ = 0x01; /* one pixel */ 207 *wrptr++ = 0x00; /* to address */ 208 *wrptr++ = 0x00; 209 *wrptr++ = 0x00; 210 return wrptr; 211 } 212 213 static int udl_crtc_write_mode_to_hw(struct drm_crtc *crtc) 214 { 215 struct drm_device *dev = crtc->dev; 216 struct udl_device *udl = to_udl(dev); 217 struct urb *urb; 218 char *buf; 219 int retval; 220 221 if (udl->mode_buf_len == 0) { 222 DRM_ERROR("No mode set\n"); 223 return -EINVAL; 224 } 225 226 urb = udl_get_urb(dev); 227 if (!urb) 228 return -ENOMEM; 229 230 buf = (char *)urb->transfer_buffer; 231 232 memcpy(buf, udl->mode_buf, udl->mode_buf_len); 233 retval = udl_submit_urb(dev, urb, udl->mode_buf_len); 234 DRM_DEBUG("write mode info %d\n", udl->mode_buf_len); 235 return retval; 236 } 237 238 static long udl_log_cpp(unsigned int cpp) 239 { 240 if (WARN_ON(!is_power_of_2(cpp))) 241 return -EINVAL; 242 return __ffs(cpp); 243 } 244 245 static int udl_aligned_damage_clip(struct drm_rect *clip, int x, int y, 246 int width, int height) 247 { 248 int x1, x2; 249 250 if (WARN_ON_ONCE(x < 0) || 251 WARN_ON_ONCE(y < 0) || 252 WARN_ON_ONCE(width < 0) || 253 WARN_ON_ONCE(height < 0)) 254 return -EINVAL; 255 256 x1 = ALIGN_DOWN(x, sizeof(unsigned long)); 257 x2 = ALIGN(width + (x - x1), sizeof(unsigned long)) + x1; 258 259 clip->x1 = x1; 260 clip->y1 = y; 261 clip->x2 = x2; 262 clip->y2 = y + height; 263 264 return 0; 265 } 266 267 static int udl_handle_damage(struct drm_framebuffer *fb, const struct dma_buf_map *map, 268 int x, int y, int width, int height) 269 { 270 struct drm_device *dev = fb->dev; 271 void *vaddr = map->vaddr; /* TODO: Use mapping abstraction properly */ 272 int i, ret; 273 char *cmd; 274 struct urb *urb; 275 struct drm_rect clip; 276 int log_bpp; 277 278 ret = udl_log_cpp(fb->format->cpp[0]); 279 if (ret < 0) 280 return ret; 281 log_bpp = ret; 282 283 ret = udl_aligned_damage_clip(&clip, x, y, width, height); 284 if (ret) 285 return ret; 286 else if ((clip.x2 > fb->width) || (clip.y2 > fb->height)) 287 return -EINVAL; 288 289 ret = drm_gem_fb_begin_cpu_access(fb, DMA_FROM_DEVICE); 290 if (ret) 291 return ret; 292 293 urb = udl_get_urb(dev); 294 if (!urb) { 295 ret = -ENOMEM; 296 goto out_drm_gem_fb_end_cpu_access; 297 } 298 cmd = urb->transfer_buffer; 299 300 for (i = clip.y1; i < clip.y2; i++) { 301 const int line_offset = fb->pitches[0] * i; 302 const int byte_offset = line_offset + (clip.x1 << log_bpp); 303 const int dev_byte_offset = (fb->width * i + clip.x1) << log_bpp; 304 const int byte_width = (clip.x2 - clip.x1) << log_bpp; 305 ret = udl_render_hline(dev, log_bpp, &urb, (char *)vaddr, 306 &cmd, byte_offset, dev_byte_offset, 307 byte_width); 308 if (ret) 309 goto out_drm_gem_fb_end_cpu_access; 310 } 311 312 if (cmd > (char *)urb->transfer_buffer) { 313 /* Send partial buffer remaining before exiting */ 314 int len; 315 if (cmd < (char *)urb->transfer_buffer + urb->transfer_buffer_length) 316 *cmd++ = 0xAF; 317 len = cmd - (char *)urb->transfer_buffer; 318 ret = udl_submit_urb(dev, urb, len); 319 } else { 320 udl_urb_completion(urb); 321 } 322 323 ret = 0; 324 325 out_drm_gem_fb_end_cpu_access: 326 drm_gem_fb_end_cpu_access(fb, DMA_FROM_DEVICE); 327 return ret; 328 } 329 330 /* 331 * Simple display pipeline 332 */ 333 334 static const uint32_t udl_simple_display_pipe_formats[] = { 335 DRM_FORMAT_RGB565, 336 DRM_FORMAT_XRGB8888, 337 }; 338 339 static enum drm_mode_status 340 udl_simple_display_pipe_mode_valid(struct drm_simple_display_pipe *pipe, 341 const struct drm_display_mode *mode) 342 { 343 return MODE_OK; 344 } 345 346 static void 347 udl_simple_display_pipe_enable(struct drm_simple_display_pipe *pipe, 348 struct drm_crtc_state *crtc_state, 349 struct drm_plane_state *plane_state) 350 { 351 struct drm_crtc *crtc = &pipe->crtc; 352 struct drm_device *dev = crtc->dev; 353 struct drm_framebuffer *fb = plane_state->fb; 354 struct udl_device *udl = to_udl(dev); 355 struct drm_display_mode *mode = &crtc_state->mode; 356 struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state); 357 char *buf; 358 char *wrptr; 359 int color_depth = UDL_COLOR_DEPTH_16BPP; 360 361 buf = (char *)udl->mode_buf; 362 363 /* This first section has to do with setting the base address on the 364 * controller associated with the display. There are 2 base 365 * pointers, currently, we only use the 16 bpp segment. 366 */ 367 wrptr = udl_vidreg_lock(buf); 368 wrptr = udl_set_color_depth(wrptr, color_depth); 369 /* set base for 16bpp segment to 0 */ 370 wrptr = udl_set_base16bpp(wrptr, 0); 371 /* set base for 8bpp segment to end of fb */ 372 wrptr = udl_set_base8bpp(wrptr, 2 * mode->vdisplay * mode->hdisplay); 373 374 wrptr = udl_set_vid_cmds(wrptr, mode); 375 wrptr = udl_set_blank_mode(wrptr, UDL_BLANK_MODE_ON); 376 wrptr = udl_vidreg_unlock(wrptr); 377 378 wrptr = udl_dummy_render(wrptr); 379 380 udl->mode_buf_len = wrptr - buf; 381 382 udl_handle_damage(fb, &shadow_plane_state->data[0], 0, 0, fb->width, fb->height); 383 384 if (!crtc_state->mode_changed) 385 return; 386 387 /* enable display */ 388 udl_crtc_write_mode_to_hw(crtc); 389 } 390 391 static void 392 udl_simple_display_pipe_disable(struct drm_simple_display_pipe *pipe) 393 { 394 struct drm_crtc *crtc = &pipe->crtc; 395 struct drm_device *dev = crtc->dev; 396 struct urb *urb; 397 char *buf; 398 399 urb = udl_get_urb(dev); 400 if (!urb) 401 return; 402 403 buf = (char *)urb->transfer_buffer; 404 buf = udl_vidreg_lock(buf); 405 buf = udl_set_blank_mode(buf, UDL_BLANK_MODE_POWERDOWN); 406 buf = udl_vidreg_unlock(buf); 407 buf = udl_dummy_render(buf); 408 409 udl_submit_urb(dev, urb, buf - (char *)urb->transfer_buffer); 410 } 411 412 static void 413 udl_simple_display_pipe_update(struct drm_simple_display_pipe *pipe, 414 struct drm_plane_state *old_plane_state) 415 { 416 struct drm_plane_state *state = pipe->plane.state; 417 struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(state); 418 struct drm_framebuffer *fb = state->fb; 419 struct drm_rect rect; 420 421 if (!fb) 422 return; 423 424 if (drm_atomic_helper_damage_merged(old_plane_state, state, &rect)) 425 udl_handle_damage(fb, &shadow_plane_state->data[0], rect.x1, rect.y1, 426 rect.x2 - rect.x1, rect.y2 - rect.y1); 427 } 428 429 static const struct drm_simple_display_pipe_funcs udl_simple_display_pipe_funcs = { 430 .mode_valid = udl_simple_display_pipe_mode_valid, 431 .enable = udl_simple_display_pipe_enable, 432 .disable = udl_simple_display_pipe_disable, 433 .update = udl_simple_display_pipe_update, 434 DRM_GEM_SIMPLE_DISPLAY_PIPE_SHADOW_PLANE_FUNCS, 435 }; 436 437 /* 438 * Modesetting 439 */ 440 441 static const struct drm_mode_config_funcs udl_mode_funcs = { 442 .fb_create = drm_gem_fb_create_with_dirty, 443 .atomic_check = drm_atomic_helper_check, 444 .atomic_commit = drm_atomic_helper_commit, 445 }; 446 447 int udl_modeset_init(struct drm_device *dev) 448 { 449 size_t format_count = ARRAY_SIZE(udl_simple_display_pipe_formats); 450 struct udl_device *udl = to_udl(dev); 451 struct drm_connector *connector; 452 int ret; 453 454 ret = drmm_mode_config_init(dev); 455 if (ret) 456 return ret; 457 458 dev->mode_config.min_width = 640; 459 dev->mode_config.min_height = 480; 460 461 dev->mode_config.max_width = 2048; 462 dev->mode_config.max_height = 2048; 463 464 dev->mode_config.prefer_shadow = 0; 465 dev->mode_config.preferred_depth = 16; 466 467 dev->mode_config.funcs = &udl_mode_funcs; 468 469 connector = udl_connector_init(dev); 470 if (IS_ERR(connector)) 471 return PTR_ERR(connector); 472 473 format_count = ARRAY_SIZE(udl_simple_display_pipe_formats); 474 475 ret = drm_simple_display_pipe_init(dev, &udl->display_pipe, 476 &udl_simple_display_pipe_funcs, 477 udl_simple_display_pipe_formats, 478 format_count, NULL, connector); 479 if (ret) 480 return ret; 481 482 drm_mode_config_reset(dev); 483 484 return 0; 485 } 486