1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * DRM driver for Multi-Inno MI0283QT panels 4 * 5 * Copyright 2016 Noralf Trønnes 6 */ 7 8 #include <linux/backlight.h> 9 #include <linux/delay.h> 10 #include <linux/gpio/consumer.h> 11 #include <linux/module.h> 12 #include <linux/property.h> 13 #include <linux/regulator/consumer.h> 14 #include <linux/spi/spi.h> 15 16 #include <drm/drm_atomic_helper.h> 17 #include <drm/drm_drv.h> 18 #include <drm/drm_fb_helper.h> 19 #include <drm/drm_gem_atomic_helper.h> 20 #include <drm/drm_gem_dma_helper.h> 21 #include <drm/drm_managed.h> 22 #include <drm/drm_mipi_dbi.h> 23 #include <drm/drm_modeset_helper.h> 24 #include <video/mipi_display.h> 25 26 #define ILI9341_FRMCTR1 0xb1 27 #define ILI9341_DISCTRL 0xb6 28 #define ILI9341_ETMOD 0xb7 29 30 #define ILI9341_PWCTRL1 0xc0 31 #define ILI9341_PWCTRL2 0xc1 32 #define ILI9341_VMCTRL1 0xc5 33 #define ILI9341_VMCTRL2 0xc7 34 #define ILI9341_PWCTRLA 0xcb 35 #define ILI9341_PWCTRLB 0xcf 36 37 #define ILI9341_PGAMCTRL 0xe0 38 #define ILI9341_NGAMCTRL 0xe1 39 #define ILI9341_DTCTRLA 0xe8 40 #define ILI9341_DTCTRLB 0xea 41 #define ILI9341_PWRSEQ 0xed 42 43 #define ILI9341_EN3GAM 0xf2 44 #define ILI9341_PUMPCTRL 0xf7 45 46 #define ILI9341_MADCTL_BGR BIT(3) 47 #define ILI9341_MADCTL_MV BIT(5) 48 #define ILI9341_MADCTL_MX BIT(6) 49 #define ILI9341_MADCTL_MY BIT(7) 50 51 static void mi0283qt_enable(struct drm_simple_display_pipe *pipe, 52 struct drm_crtc_state *crtc_state, 53 struct drm_plane_state *plane_state) 54 { 55 struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev); 56 struct mipi_dbi *dbi = &dbidev->dbi; 57 u8 addr_mode; 58 int ret, idx; 59 60 if (!drm_dev_enter(pipe->crtc.dev, &idx)) 61 return; 62 63 DRM_DEBUG_KMS("\n"); 64 65 ret = mipi_dbi_poweron_conditional_reset(dbidev); 66 if (ret < 0) 67 goto out_exit; 68 if (ret == 1) 69 goto out_enable; 70 71 mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_OFF); 72 73 mipi_dbi_command(dbi, ILI9341_PWCTRLB, 0x00, 0x83, 0x30); 74 mipi_dbi_command(dbi, ILI9341_PWRSEQ, 0x64, 0x03, 0x12, 0x81); 75 mipi_dbi_command(dbi, ILI9341_DTCTRLA, 0x85, 0x01, 0x79); 76 mipi_dbi_command(dbi, ILI9341_PWCTRLA, 0x39, 0x2c, 0x00, 0x34, 0x02); 77 mipi_dbi_command(dbi, ILI9341_PUMPCTRL, 0x20); 78 mipi_dbi_command(dbi, ILI9341_DTCTRLB, 0x00, 0x00); 79 80 /* Power Control */ 81 mipi_dbi_command(dbi, ILI9341_PWCTRL1, 0x26); 82 mipi_dbi_command(dbi, ILI9341_PWCTRL2, 0x11); 83 /* VCOM */ 84 mipi_dbi_command(dbi, ILI9341_VMCTRL1, 0x35, 0x3e); 85 mipi_dbi_command(dbi, ILI9341_VMCTRL2, 0xbe); 86 87 /* Memory Access Control */ 88 mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT); 89 90 /* Frame Rate */ 91 mipi_dbi_command(dbi, ILI9341_FRMCTR1, 0x00, 0x1b); 92 93 /* Gamma */ 94 mipi_dbi_command(dbi, ILI9341_EN3GAM, 0x08); 95 mipi_dbi_command(dbi, MIPI_DCS_SET_GAMMA_CURVE, 0x01); 96 mipi_dbi_command(dbi, ILI9341_PGAMCTRL, 97 0x1f, 0x1a, 0x18, 0x0a, 0x0f, 0x06, 0x45, 0x87, 98 0x32, 0x0a, 0x07, 0x02, 0x07, 0x05, 0x00); 99 mipi_dbi_command(dbi, ILI9341_NGAMCTRL, 100 0x00, 0x25, 0x27, 0x05, 0x10, 0x09, 0x3a, 0x78, 101 0x4d, 0x05, 0x18, 0x0d, 0x38, 0x3a, 0x1f); 102 103 /* DDRAM */ 104 mipi_dbi_command(dbi, ILI9341_ETMOD, 0x07); 105 106 /* Display */ 107 mipi_dbi_command(dbi, ILI9341_DISCTRL, 0x0a, 0x82, 0x27, 0x00); 108 mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE); 109 msleep(100); 110 111 mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON); 112 msleep(100); 113 114 out_enable: 115 /* The PiTFT (ili9340) has a hardware reset circuit that 116 * resets only on power-on and not on each reboot through 117 * a gpio like the rpi-display does. 118 * As a result, we need to always apply the rotation value 119 * regardless of the display "on/off" state. 120 */ 121 switch (dbidev->rotation) { 122 default: 123 addr_mode = ILI9341_MADCTL_MV | ILI9341_MADCTL_MY | 124 ILI9341_MADCTL_MX; 125 break; 126 case 90: 127 addr_mode = ILI9341_MADCTL_MY; 128 break; 129 case 180: 130 addr_mode = ILI9341_MADCTL_MV; 131 break; 132 case 270: 133 addr_mode = ILI9341_MADCTL_MX; 134 break; 135 } 136 addr_mode |= ILI9341_MADCTL_BGR; 137 mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode); 138 mipi_dbi_enable_flush(dbidev, crtc_state, plane_state); 139 out_exit: 140 drm_dev_exit(idx); 141 } 142 143 static const struct drm_simple_display_pipe_funcs mi0283qt_pipe_funcs = { 144 .mode_valid = mipi_dbi_pipe_mode_valid, 145 .enable = mi0283qt_enable, 146 .disable = mipi_dbi_pipe_disable, 147 .update = mipi_dbi_pipe_update, 148 }; 149 150 static const struct drm_display_mode mi0283qt_mode = { 151 DRM_SIMPLE_MODE(320, 240, 58, 43), 152 }; 153 154 DEFINE_DRM_GEM_DMA_FOPS(mi0283qt_fops); 155 156 static const struct drm_driver mi0283qt_driver = { 157 .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, 158 .fops = &mi0283qt_fops, 159 DRM_GEM_DMA_DRIVER_OPS_VMAP, 160 .debugfs_init = mipi_dbi_debugfs_init, 161 .name = "mi0283qt", 162 .desc = "Multi-Inno MI0283QT", 163 .date = "20160614", 164 .major = 1, 165 .minor = 0, 166 }; 167 168 static const struct of_device_id mi0283qt_of_match[] = { 169 { .compatible = "multi-inno,mi0283qt" }, 170 {}, 171 }; 172 MODULE_DEVICE_TABLE(of, mi0283qt_of_match); 173 174 static const struct spi_device_id mi0283qt_id[] = { 175 { "mi0283qt", 0 }, 176 { }, 177 }; 178 MODULE_DEVICE_TABLE(spi, mi0283qt_id); 179 180 static int mi0283qt_probe(struct spi_device *spi) 181 { 182 struct device *dev = &spi->dev; 183 struct mipi_dbi_dev *dbidev; 184 struct drm_device *drm; 185 struct mipi_dbi *dbi; 186 struct gpio_desc *dc; 187 u32 rotation = 0; 188 int ret; 189 190 dbidev = devm_drm_dev_alloc(dev, &mi0283qt_driver, 191 struct mipi_dbi_dev, drm); 192 if (IS_ERR(dbidev)) 193 return PTR_ERR(dbidev); 194 195 dbi = &dbidev->dbi; 196 drm = &dbidev->drm; 197 198 dbi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); 199 if (IS_ERR(dbi->reset)) 200 return dev_err_probe(dev, PTR_ERR(dbi->reset), "Failed to get GPIO 'reset'\n"); 201 202 dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW); 203 if (IS_ERR(dc)) 204 return dev_err_probe(dev, PTR_ERR(dc), "Failed to get GPIO 'dc'\n"); 205 206 dbidev->regulator = devm_regulator_get(dev, "power"); 207 if (IS_ERR(dbidev->regulator)) 208 return PTR_ERR(dbidev->regulator); 209 210 dbidev->backlight = devm_of_find_backlight(dev); 211 if (IS_ERR(dbidev->backlight)) 212 return PTR_ERR(dbidev->backlight); 213 214 device_property_read_u32(dev, "rotation", &rotation); 215 216 ret = mipi_dbi_spi_init(spi, dbi, dc); 217 if (ret) 218 return ret; 219 220 ret = mipi_dbi_dev_init(dbidev, &mi0283qt_pipe_funcs, &mi0283qt_mode, rotation); 221 if (ret) 222 return ret; 223 224 drm_mode_config_reset(drm); 225 226 ret = drm_dev_register(drm, 0); 227 if (ret) 228 return ret; 229 230 spi_set_drvdata(spi, drm); 231 232 drm_fbdev_generic_setup(drm, 0); 233 234 return 0; 235 } 236 237 static void mi0283qt_remove(struct spi_device *spi) 238 { 239 struct drm_device *drm = spi_get_drvdata(spi); 240 241 drm_dev_unplug(drm); 242 drm_atomic_helper_shutdown(drm); 243 } 244 245 static void mi0283qt_shutdown(struct spi_device *spi) 246 { 247 drm_atomic_helper_shutdown(spi_get_drvdata(spi)); 248 } 249 250 static int __maybe_unused mi0283qt_pm_suspend(struct device *dev) 251 { 252 return drm_mode_config_helper_suspend(dev_get_drvdata(dev)); 253 } 254 255 static int __maybe_unused mi0283qt_pm_resume(struct device *dev) 256 { 257 drm_mode_config_helper_resume(dev_get_drvdata(dev)); 258 259 return 0; 260 } 261 262 static const struct dev_pm_ops mi0283qt_pm_ops = { 263 SET_SYSTEM_SLEEP_PM_OPS(mi0283qt_pm_suspend, mi0283qt_pm_resume) 264 }; 265 266 static struct spi_driver mi0283qt_spi_driver = { 267 .driver = { 268 .name = "mi0283qt", 269 .owner = THIS_MODULE, 270 .of_match_table = mi0283qt_of_match, 271 .pm = &mi0283qt_pm_ops, 272 }, 273 .id_table = mi0283qt_id, 274 .probe = mi0283qt_probe, 275 .remove = mi0283qt_remove, 276 .shutdown = mi0283qt_shutdown, 277 }; 278 module_spi_driver(mi0283qt_spi_driver); 279 280 MODULE_DESCRIPTION("Multi-Inno MI0283QT DRM driver"); 281 MODULE_AUTHOR("Noralf Trønnes"); 282 MODULE_LICENSE("GPL"); 283