1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * DRM driver for Multi-Inno MI0283QT panels 4 * 5 * Copyright 2016 Noralf Trønnes 6 */ 7 8 #include <linux/backlight.h> 9 #include <linux/delay.h> 10 #include <linux/gpio/consumer.h> 11 #include <linux/module.h> 12 #include <linux/property.h> 13 #include <linux/regulator/consumer.h> 14 #include <linux/spi/spi.h> 15 16 #include <drm/drm_atomic_helper.h> 17 #include <drm/drm_drv.h> 18 #include <drm/drm_fb_helper.h> 19 #include <drm/drm_gem_atomic_helper.h> 20 #include <drm/drm_gem_cma_helper.h> 21 #include <drm/drm_managed.h> 22 #include <drm/drm_mipi_dbi.h> 23 #include <drm/drm_modeset_helper.h> 24 #include <video/mipi_display.h> 25 26 #define ILI9341_FRMCTR1 0xb1 27 #define ILI9341_DISCTRL 0xb6 28 #define ILI9341_ETMOD 0xb7 29 30 #define ILI9341_PWCTRL1 0xc0 31 #define ILI9341_PWCTRL2 0xc1 32 #define ILI9341_VMCTRL1 0xc5 33 #define ILI9341_VMCTRL2 0xc7 34 #define ILI9341_PWCTRLA 0xcb 35 #define ILI9341_PWCTRLB 0xcf 36 37 #define ILI9341_PGAMCTRL 0xe0 38 #define ILI9341_NGAMCTRL 0xe1 39 #define ILI9341_DTCTRLA 0xe8 40 #define ILI9341_DTCTRLB 0xea 41 #define ILI9341_PWRSEQ 0xed 42 43 #define ILI9341_EN3GAM 0xf2 44 #define ILI9341_PUMPCTRL 0xf7 45 46 #define ILI9341_MADCTL_BGR BIT(3) 47 #define ILI9341_MADCTL_MV BIT(5) 48 #define ILI9341_MADCTL_MX BIT(6) 49 #define ILI9341_MADCTL_MY BIT(7) 50 51 static void mi0283qt_enable(struct drm_simple_display_pipe *pipe, 52 struct drm_crtc_state *crtc_state, 53 struct drm_plane_state *plane_state) 54 { 55 struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev); 56 struct mipi_dbi *dbi = &dbidev->dbi; 57 u8 addr_mode; 58 int ret, idx; 59 60 if (!drm_dev_enter(pipe->crtc.dev, &idx)) 61 return; 62 63 DRM_DEBUG_KMS("\n"); 64 65 ret = mipi_dbi_poweron_conditional_reset(dbidev); 66 if (ret < 0) 67 goto out_exit; 68 if (ret == 1) 69 goto out_enable; 70 71 mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_OFF); 72 73 mipi_dbi_command(dbi, ILI9341_PWCTRLB, 0x00, 0x83, 0x30); 74 mipi_dbi_command(dbi, ILI9341_PWRSEQ, 0x64, 0x03, 0x12, 0x81); 75 mipi_dbi_command(dbi, ILI9341_DTCTRLA, 0x85, 0x01, 0x79); 76 mipi_dbi_command(dbi, ILI9341_PWCTRLA, 0x39, 0x2c, 0x00, 0x34, 0x02); 77 mipi_dbi_command(dbi, ILI9341_PUMPCTRL, 0x20); 78 mipi_dbi_command(dbi, ILI9341_DTCTRLB, 0x00, 0x00); 79 80 /* Power Control */ 81 mipi_dbi_command(dbi, ILI9341_PWCTRL1, 0x26); 82 mipi_dbi_command(dbi, ILI9341_PWCTRL2, 0x11); 83 /* VCOM */ 84 mipi_dbi_command(dbi, ILI9341_VMCTRL1, 0x35, 0x3e); 85 mipi_dbi_command(dbi, ILI9341_VMCTRL2, 0xbe); 86 87 /* Memory Access Control */ 88 mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT); 89 90 /* Frame Rate */ 91 mipi_dbi_command(dbi, ILI9341_FRMCTR1, 0x00, 0x1b); 92 93 /* Gamma */ 94 mipi_dbi_command(dbi, ILI9341_EN3GAM, 0x08); 95 mipi_dbi_command(dbi, MIPI_DCS_SET_GAMMA_CURVE, 0x01); 96 mipi_dbi_command(dbi, ILI9341_PGAMCTRL, 97 0x1f, 0x1a, 0x18, 0x0a, 0x0f, 0x06, 0x45, 0x87, 98 0x32, 0x0a, 0x07, 0x02, 0x07, 0x05, 0x00); 99 mipi_dbi_command(dbi, ILI9341_NGAMCTRL, 100 0x00, 0x25, 0x27, 0x05, 0x10, 0x09, 0x3a, 0x78, 101 0x4d, 0x05, 0x18, 0x0d, 0x38, 0x3a, 0x1f); 102 103 /* DDRAM */ 104 mipi_dbi_command(dbi, ILI9341_ETMOD, 0x07); 105 106 /* Display */ 107 mipi_dbi_command(dbi, ILI9341_DISCTRL, 0x0a, 0x82, 0x27, 0x00); 108 mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE); 109 msleep(100); 110 111 mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON); 112 msleep(100); 113 114 out_enable: 115 /* The PiTFT (ili9340) has a hardware reset circuit that 116 * resets only on power-on and not on each reboot through 117 * a gpio like the rpi-display does. 118 * As a result, we need to always apply the rotation value 119 * regardless of the display "on/off" state. 120 */ 121 switch (dbidev->rotation) { 122 default: 123 addr_mode = ILI9341_MADCTL_MV | ILI9341_MADCTL_MY | 124 ILI9341_MADCTL_MX; 125 break; 126 case 90: 127 addr_mode = ILI9341_MADCTL_MY; 128 break; 129 case 180: 130 addr_mode = ILI9341_MADCTL_MV; 131 break; 132 case 270: 133 addr_mode = ILI9341_MADCTL_MX; 134 break; 135 } 136 addr_mode |= ILI9341_MADCTL_BGR; 137 mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode); 138 mipi_dbi_enable_flush(dbidev, crtc_state, plane_state); 139 out_exit: 140 drm_dev_exit(idx); 141 } 142 143 static const struct drm_simple_display_pipe_funcs mi0283qt_pipe_funcs = { 144 .enable = mi0283qt_enable, 145 .disable = mipi_dbi_pipe_disable, 146 .update = mipi_dbi_pipe_update, 147 }; 148 149 static const struct drm_display_mode mi0283qt_mode = { 150 DRM_SIMPLE_MODE(320, 240, 58, 43), 151 }; 152 153 DEFINE_DRM_GEM_CMA_FOPS(mi0283qt_fops); 154 155 static const struct drm_driver mi0283qt_driver = { 156 .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, 157 .fops = &mi0283qt_fops, 158 DRM_GEM_CMA_DRIVER_OPS_VMAP, 159 .debugfs_init = mipi_dbi_debugfs_init, 160 .name = "mi0283qt", 161 .desc = "Multi-Inno MI0283QT", 162 .date = "20160614", 163 .major = 1, 164 .minor = 0, 165 }; 166 167 static const struct of_device_id mi0283qt_of_match[] = { 168 { .compatible = "multi-inno,mi0283qt" }, 169 {}, 170 }; 171 MODULE_DEVICE_TABLE(of, mi0283qt_of_match); 172 173 static const struct spi_device_id mi0283qt_id[] = { 174 { "mi0283qt", 0 }, 175 { }, 176 }; 177 MODULE_DEVICE_TABLE(spi, mi0283qt_id); 178 179 static int mi0283qt_probe(struct spi_device *spi) 180 { 181 struct device *dev = &spi->dev; 182 struct mipi_dbi_dev *dbidev; 183 struct drm_device *drm; 184 struct mipi_dbi *dbi; 185 struct gpio_desc *dc; 186 u32 rotation = 0; 187 int ret; 188 189 dbidev = devm_drm_dev_alloc(dev, &mi0283qt_driver, 190 struct mipi_dbi_dev, drm); 191 if (IS_ERR(dbidev)) 192 return PTR_ERR(dbidev); 193 194 dbi = &dbidev->dbi; 195 drm = &dbidev->drm; 196 197 dbi->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); 198 if (IS_ERR(dbi->reset)) 199 return dev_err_probe(dev, PTR_ERR(dbi->reset), "Failed to get GPIO 'reset'\n"); 200 201 dc = devm_gpiod_get_optional(dev, "dc", GPIOD_OUT_LOW); 202 if (IS_ERR(dc)) 203 return dev_err_probe(dev, PTR_ERR(dc), "Failed to get GPIO 'dc'\n"); 204 205 dbidev->regulator = devm_regulator_get(dev, "power"); 206 if (IS_ERR(dbidev->regulator)) 207 return PTR_ERR(dbidev->regulator); 208 209 dbidev->backlight = devm_of_find_backlight(dev); 210 if (IS_ERR(dbidev->backlight)) 211 return PTR_ERR(dbidev->backlight); 212 213 device_property_read_u32(dev, "rotation", &rotation); 214 215 ret = mipi_dbi_spi_init(spi, dbi, dc); 216 if (ret) 217 return ret; 218 219 ret = mipi_dbi_dev_init(dbidev, &mi0283qt_pipe_funcs, &mi0283qt_mode, rotation); 220 if (ret) 221 return ret; 222 223 drm_mode_config_reset(drm); 224 225 ret = drm_dev_register(drm, 0); 226 if (ret) 227 return ret; 228 229 spi_set_drvdata(spi, drm); 230 231 drm_fbdev_generic_setup(drm, 0); 232 233 return 0; 234 } 235 236 static int mi0283qt_remove(struct spi_device *spi) 237 { 238 struct drm_device *drm = spi_get_drvdata(spi); 239 240 drm_dev_unplug(drm); 241 drm_atomic_helper_shutdown(drm); 242 243 return 0; 244 } 245 246 static void mi0283qt_shutdown(struct spi_device *spi) 247 { 248 drm_atomic_helper_shutdown(spi_get_drvdata(spi)); 249 } 250 251 static int __maybe_unused mi0283qt_pm_suspend(struct device *dev) 252 { 253 return drm_mode_config_helper_suspend(dev_get_drvdata(dev)); 254 } 255 256 static int __maybe_unused mi0283qt_pm_resume(struct device *dev) 257 { 258 drm_mode_config_helper_resume(dev_get_drvdata(dev)); 259 260 return 0; 261 } 262 263 static const struct dev_pm_ops mi0283qt_pm_ops = { 264 SET_SYSTEM_SLEEP_PM_OPS(mi0283qt_pm_suspend, mi0283qt_pm_resume) 265 }; 266 267 static struct spi_driver mi0283qt_spi_driver = { 268 .driver = { 269 .name = "mi0283qt", 270 .owner = THIS_MODULE, 271 .of_match_table = mi0283qt_of_match, 272 .pm = &mi0283qt_pm_ops, 273 }, 274 .id_table = mi0283qt_id, 275 .probe = mi0283qt_probe, 276 .remove = mi0283qt_remove, 277 .shutdown = mi0283qt_shutdown, 278 }; 279 module_spi_driver(mi0283qt_spi_driver); 280 281 MODULE_DESCRIPTION("Multi-Inno MI0283QT DRM driver"); 282 MODULE_AUTHOR("Noralf Trønnes"); 283 MODULE_LICENSE("GPL"); 284