1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * DRM driver for Ilitek ILI9225 panels 4 * 5 * Copyright 2017 David Lechner <david@lechnology.com> 6 * 7 * Some code copied from mipi-dbi.c 8 * Copyright 2016 Noralf Trønnes 9 */ 10 11 #include <linux/delay.h> 12 #include <linux/dma-buf.h> 13 #include <linux/gpio/consumer.h> 14 #include <linux/module.h> 15 #include <linux/property.h> 16 #include <linux/spi/spi.h> 17 #include <video/mipi_display.h> 18 19 #include <drm/drm_atomic_helper.h> 20 #include <drm/drm_damage_helper.h> 21 #include <drm/drm_drv.h> 22 #include <drm/drm_fb_cma_helper.h> 23 #include <drm/drm_fb_helper.h> 24 #include <drm/drm_fourcc.h> 25 #include <drm/drm_gem_atomic_helper.h> 26 #include <drm/drm_gem_cma_helper.h> 27 #include <drm/drm_managed.h> 28 #include <drm/drm_mipi_dbi.h> 29 #include <drm/drm_rect.h> 30 31 #define ILI9225_DRIVER_READ_CODE 0x00 32 #define ILI9225_DRIVER_OUTPUT_CONTROL 0x01 33 #define ILI9225_LCD_AC_DRIVING_CONTROL 0x02 34 #define ILI9225_ENTRY_MODE 0x03 35 #define ILI9225_DISPLAY_CONTROL_1 0x07 36 #define ILI9225_BLANK_PERIOD_CONTROL_1 0x08 37 #define ILI9225_FRAME_CYCLE_CONTROL 0x0b 38 #define ILI9225_INTERFACE_CONTROL 0x0c 39 #define ILI9225_OSCILLATION_CONTROL 0x0f 40 #define ILI9225_POWER_CONTROL_1 0x10 41 #define ILI9225_POWER_CONTROL_2 0x11 42 #define ILI9225_POWER_CONTROL_3 0x12 43 #define ILI9225_POWER_CONTROL_4 0x13 44 #define ILI9225_POWER_CONTROL_5 0x14 45 #define ILI9225_VCI_RECYCLING 0x15 46 #define ILI9225_RAM_ADDRESS_SET_1 0x20 47 #define ILI9225_RAM_ADDRESS_SET_2 0x21 48 #define ILI9225_WRITE_DATA_TO_GRAM 0x22 49 #define ILI9225_SOFTWARE_RESET 0x28 50 #define ILI9225_GATE_SCAN_CONTROL 0x30 51 #define ILI9225_VERTICAL_SCROLL_1 0x31 52 #define ILI9225_VERTICAL_SCROLL_2 0x32 53 #define ILI9225_VERTICAL_SCROLL_3 0x33 54 #define ILI9225_PARTIAL_DRIVING_POS_1 0x34 55 #define ILI9225_PARTIAL_DRIVING_POS_2 0x35 56 #define ILI9225_HORIZ_WINDOW_ADDR_1 0x36 57 #define ILI9225_HORIZ_WINDOW_ADDR_2 0x37 58 #define ILI9225_VERT_WINDOW_ADDR_1 0x38 59 #define ILI9225_VERT_WINDOW_ADDR_2 0x39 60 #define ILI9225_GAMMA_CONTROL_1 0x50 61 #define ILI9225_GAMMA_CONTROL_2 0x51 62 #define ILI9225_GAMMA_CONTROL_3 0x52 63 #define ILI9225_GAMMA_CONTROL_4 0x53 64 #define ILI9225_GAMMA_CONTROL_5 0x54 65 #define ILI9225_GAMMA_CONTROL_6 0x55 66 #define ILI9225_GAMMA_CONTROL_7 0x56 67 #define ILI9225_GAMMA_CONTROL_8 0x57 68 #define ILI9225_GAMMA_CONTROL_9 0x58 69 #define ILI9225_GAMMA_CONTROL_10 0x59 70 71 static inline int ili9225_command(struct mipi_dbi *dbi, u8 cmd, u16 data) 72 { 73 u8 par[2] = { data >> 8, data & 0xff }; 74 75 return mipi_dbi_command_buf(dbi, cmd, par, 2); 76 } 77 78 static void ili9225_fb_dirty(struct drm_framebuffer *fb, struct drm_rect *rect) 79 { 80 struct drm_gem_cma_object *cma_obj = drm_fb_cma_get_gem_obj(fb, 0); 81 struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(fb->dev); 82 unsigned int height = rect->y2 - rect->y1; 83 unsigned int width = rect->x2 - rect->x1; 84 struct mipi_dbi *dbi = &dbidev->dbi; 85 bool swap = dbi->swap_bytes; 86 u16 x_start, y_start; 87 u16 x1, x2, y1, y2; 88 int idx, ret = 0; 89 bool full; 90 void *tr; 91 92 if (!drm_dev_enter(fb->dev, &idx)) 93 return; 94 95 full = width == fb->width && height == fb->height; 96 97 DRM_DEBUG_KMS("Flushing [FB:%d] " DRM_RECT_FMT "\n", fb->base.id, DRM_RECT_ARG(rect)); 98 99 if (!dbi->dc || !full || swap || 100 fb->format->format == DRM_FORMAT_XRGB8888) { 101 tr = dbidev->tx_buf; 102 ret = mipi_dbi_buf_copy(dbidev->tx_buf, fb, rect, swap); 103 if (ret) 104 goto err_msg; 105 } else { 106 tr = cma_obj->vaddr; 107 } 108 109 switch (dbidev->rotation) { 110 default: 111 x1 = rect->x1; 112 x2 = rect->x2 - 1; 113 y1 = rect->y1; 114 y2 = rect->y2 - 1; 115 x_start = x1; 116 y_start = y1; 117 break; 118 case 90: 119 x1 = rect->y1; 120 x2 = rect->y2 - 1; 121 y1 = fb->width - rect->x2; 122 y2 = fb->width - rect->x1 - 1; 123 x_start = x1; 124 y_start = y2; 125 break; 126 case 180: 127 x1 = fb->width - rect->x2; 128 x2 = fb->width - rect->x1 - 1; 129 y1 = fb->height - rect->y2; 130 y2 = fb->height - rect->y1 - 1; 131 x_start = x2; 132 y_start = y2; 133 break; 134 case 270: 135 x1 = fb->height - rect->y2; 136 x2 = fb->height - rect->y1 - 1; 137 y1 = rect->x1; 138 y2 = rect->x2 - 1; 139 x_start = x2; 140 y_start = y1; 141 break; 142 } 143 144 ili9225_command(dbi, ILI9225_HORIZ_WINDOW_ADDR_1, x2); 145 ili9225_command(dbi, ILI9225_HORIZ_WINDOW_ADDR_2, x1); 146 ili9225_command(dbi, ILI9225_VERT_WINDOW_ADDR_1, y2); 147 ili9225_command(dbi, ILI9225_VERT_WINDOW_ADDR_2, y1); 148 149 ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_1, x_start); 150 ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_2, y_start); 151 152 ret = mipi_dbi_command_buf(dbi, ILI9225_WRITE_DATA_TO_GRAM, tr, 153 width * height * 2); 154 err_msg: 155 if (ret) 156 dev_err_once(fb->dev->dev, "Failed to update display %d\n", ret); 157 158 drm_dev_exit(idx); 159 } 160 161 static void ili9225_pipe_update(struct drm_simple_display_pipe *pipe, 162 struct drm_plane_state *old_state) 163 { 164 struct drm_plane_state *state = pipe->plane.state; 165 struct drm_rect rect; 166 167 if (!pipe->crtc.state->active) 168 return; 169 170 if (drm_atomic_helper_damage_merged(old_state, state, &rect)) 171 ili9225_fb_dirty(state->fb, &rect); 172 } 173 174 static void ili9225_pipe_enable(struct drm_simple_display_pipe *pipe, 175 struct drm_crtc_state *crtc_state, 176 struct drm_plane_state *plane_state) 177 { 178 struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev); 179 struct drm_framebuffer *fb = plane_state->fb; 180 struct device *dev = pipe->crtc.dev->dev; 181 struct mipi_dbi *dbi = &dbidev->dbi; 182 struct drm_rect rect = { 183 .x1 = 0, 184 .x2 = fb->width, 185 .y1 = 0, 186 .y2 = fb->height, 187 }; 188 int ret, idx; 189 u8 am_id; 190 191 if (!drm_dev_enter(pipe->crtc.dev, &idx)) 192 return; 193 194 DRM_DEBUG_KMS("\n"); 195 196 mipi_dbi_hw_reset(dbi); 197 198 /* 199 * There don't seem to be two example init sequences that match, so 200 * using the one from the popular Arduino library for this display. 201 * https://github.com/Nkawu/TFT_22_ILI9225/blob/master/src/TFT_22_ILI9225.cpp 202 */ 203 204 ret = ili9225_command(dbi, ILI9225_POWER_CONTROL_1, 0x0000); 205 if (ret) { 206 DRM_DEV_ERROR(dev, "Error sending command %d\n", ret); 207 goto out_exit; 208 } 209 ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x0000); 210 ili9225_command(dbi, ILI9225_POWER_CONTROL_3, 0x0000); 211 ili9225_command(dbi, ILI9225_POWER_CONTROL_4, 0x0000); 212 ili9225_command(dbi, ILI9225_POWER_CONTROL_5, 0x0000); 213 214 msleep(40); 215 216 ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x0018); 217 ili9225_command(dbi, ILI9225_POWER_CONTROL_3, 0x6121); 218 ili9225_command(dbi, ILI9225_POWER_CONTROL_4, 0x006f); 219 ili9225_command(dbi, ILI9225_POWER_CONTROL_5, 0x495f); 220 ili9225_command(dbi, ILI9225_POWER_CONTROL_1, 0x0800); 221 222 msleep(10); 223 224 ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x103b); 225 226 msleep(50); 227 228 switch (dbidev->rotation) { 229 default: 230 am_id = 0x30; 231 break; 232 case 90: 233 am_id = 0x18; 234 break; 235 case 180: 236 am_id = 0x00; 237 break; 238 case 270: 239 am_id = 0x28; 240 break; 241 } 242 ili9225_command(dbi, ILI9225_DRIVER_OUTPUT_CONTROL, 0x011c); 243 ili9225_command(dbi, ILI9225_LCD_AC_DRIVING_CONTROL, 0x0100); 244 ili9225_command(dbi, ILI9225_ENTRY_MODE, 0x1000 | am_id); 245 ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x0000); 246 ili9225_command(dbi, ILI9225_BLANK_PERIOD_CONTROL_1, 0x0808); 247 ili9225_command(dbi, ILI9225_FRAME_CYCLE_CONTROL, 0x1100); 248 ili9225_command(dbi, ILI9225_INTERFACE_CONTROL, 0x0000); 249 ili9225_command(dbi, ILI9225_OSCILLATION_CONTROL, 0x0d01); 250 ili9225_command(dbi, ILI9225_VCI_RECYCLING, 0x0020); 251 ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_1, 0x0000); 252 ili9225_command(dbi, ILI9225_RAM_ADDRESS_SET_2, 0x0000); 253 254 ili9225_command(dbi, ILI9225_GATE_SCAN_CONTROL, 0x0000); 255 ili9225_command(dbi, ILI9225_VERTICAL_SCROLL_1, 0x00db); 256 ili9225_command(dbi, ILI9225_VERTICAL_SCROLL_2, 0x0000); 257 ili9225_command(dbi, ILI9225_VERTICAL_SCROLL_3, 0x0000); 258 ili9225_command(dbi, ILI9225_PARTIAL_DRIVING_POS_1, 0x00db); 259 ili9225_command(dbi, ILI9225_PARTIAL_DRIVING_POS_2, 0x0000); 260 261 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_1, 0x0000); 262 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_2, 0x0808); 263 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_3, 0x080a); 264 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_4, 0x000a); 265 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_5, 0x0a08); 266 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_6, 0x0808); 267 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_7, 0x0000); 268 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_8, 0x0a00); 269 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_9, 0x0710); 270 ili9225_command(dbi, ILI9225_GAMMA_CONTROL_10, 0x0710); 271 272 ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x0012); 273 274 msleep(50); 275 276 ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x1017); 277 278 ili9225_fb_dirty(fb, &rect); 279 out_exit: 280 drm_dev_exit(idx); 281 } 282 283 static void ili9225_pipe_disable(struct drm_simple_display_pipe *pipe) 284 { 285 struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev); 286 struct mipi_dbi *dbi = &dbidev->dbi; 287 288 DRM_DEBUG_KMS("\n"); 289 290 /* 291 * This callback is not protected by drm_dev_enter/exit since we want to 292 * turn off the display on regular driver unload. It's highly unlikely 293 * that the underlying SPI controller is gone should this be called after 294 * unplug. 295 */ 296 297 ili9225_command(dbi, ILI9225_DISPLAY_CONTROL_1, 0x0000); 298 msleep(50); 299 ili9225_command(dbi, ILI9225_POWER_CONTROL_2, 0x0007); 300 msleep(50); 301 ili9225_command(dbi, ILI9225_POWER_CONTROL_1, 0x0a02); 302 } 303 304 static int ili9225_dbi_command(struct mipi_dbi *dbi, u8 *cmd, u8 *par, 305 size_t num) 306 { 307 struct spi_device *spi = dbi->spi; 308 unsigned int bpw = 8; 309 u32 speed_hz; 310 int ret; 311 312 gpiod_set_value_cansleep(dbi->dc, 0); 313 speed_hz = mipi_dbi_spi_cmd_max_speed(spi, 1); 314 ret = mipi_dbi_spi_transfer(spi, speed_hz, 8, cmd, 1); 315 if (ret || !num) 316 return ret; 317 318 if (*cmd == ILI9225_WRITE_DATA_TO_GRAM && !dbi->swap_bytes) 319 bpw = 16; 320 321 gpiod_set_value_cansleep(dbi->dc, 1); 322 speed_hz = mipi_dbi_spi_cmd_max_speed(spi, num); 323 324 return mipi_dbi_spi_transfer(spi, speed_hz, bpw, par, num); 325 } 326 327 static const struct drm_simple_display_pipe_funcs ili9225_pipe_funcs = { 328 .enable = ili9225_pipe_enable, 329 .disable = ili9225_pipe_disable, 330 .update = ili9225_pipe_update, 331 }; 332 333 static const struct drm_display_mode ili9225_mode = { 334 DRM_SIMPLE_MODE(176, 220, 35, 44), 335 }; 336 337 DEFINE_DRM_GEM_CMA_FOPS(ili9225_fops); 338 339 static const struct drm_driver ili9225_driver = { 340 .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, 341 .fops = &ili9225_fops, 342 DRM_GEM_CMA_DRIVER_OPS_VMAP, 343 .name = "ili9225", 344 .desc = "Ilitek ILI9225", 345 .date = "20171106", 346 .major = 1, 347 .minor = 0, 348 }; 349 350 static const struct of_device_id ili9225_of_match[] = { 351 { .compatible = "vot,v220hf01a-t" }, 352 {}, 353 }; 354 MODULE_DEVICE_TABLE(of, ili9225_of_match); 355 356 static const struct spi_device_id ili9225_id[] = { 357 { "v220hf01a-t", 0 }, 358 { }, 359 }; 360 MODULE_DEVICE_TABLE(spi, ili9225_id); 361 362 static int ili9225_probe(struct spi_device *spi) 363 { 364 struct device *dev = &spi->dev; 365 struct mipi_dbi_dev *dbidev; 366 struct drm_device *drm; 367 struct mipi_dbi *dbi; 368 struct gpio_desc *rs; 369 u32 rotation = 0; 370 int ret; 371 372 dbidev = devm_drm_dev_alloc(dev, &ili9225_driver, 373 struct mipi_dbi_dev, drm); 374 if (IS_ERR(dbidev)) 375 return PTR_ERR(dbidev); 376 377 dbi = &dbidev->dbi; 378 drm = &dbidev->drm; 379 380 dbi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); 381 if (IS_ERR(dbi->reset)) 382 return dev_err_probe(dev, PTR_ERR(dbi->reset), "Failed to get GPIO 'reset'\n"); 383 384 rs = devm_gpiod_get(dev, "rs", GPIOD_OUT_LOW); 385 if (IS_ERR(rs)) 386 return dev_err_probe(dev, PTR_ERR(rs), "Failed to get GPIO 'rs'\n"); 387 388 device_property_read_u32(dev, "rotation", &rotation); 389 390 ret = mipi_dbi_spi_init(spi, dbi, rs); 391 if (ret) 392 return ret; 393 394 /* override the command function set in mipi_dbi_spi_init() */ 395 dbi->command = ili9225_dbi_command; 396 397 ret = mipi_dbi_dev_init(dbidev, &ili9225_pipe_funcs, &ili9225_mode, rotation); 398 if (ret) 399 return ret; 400 401 drm_mode_config_reset(drm); 402 403 ret = drm_dev_register(drm, 0); 404 if (ret) 405 return ret; 406 407 spi_set_drvdata(spi, drm); 408 409 drm_fbdev_generic_setup(drm, 0); 410 411 return 0; 412 } 413 414 static int ili9225_remove(struct spi_device *spi) 415 { 416 struct drm_device *drm = spi_get_drvdata(spi); 417 418 drm_dev_unplug(drm); 419 drm_atomic_helper_shutdown(drm); 420 421 return 0; 422 } 423 424 static void ili9225_shutdown(struct spi_device *spi) 425 { 426 drm_atomic_helper_shutdown(spi_get_drvdata(spi)); 427 } 428 429 static struct spi_driver ili9225_spi_driver = { 430 .driver = { 431 .name = "ili9225", 432 .owner = THIS_MODULE, 433 .of_match_table = ili9225_of_match, 434 }, 435 .id_table = ili9225_id, 436 .probe = ili9225_probe, 437 .remove = ili9225_remove, 438 .shutdown = ili9225_shutdown, 439 }; 440 module_spi_driver(ili9225_spi_driver); 441 442 MODULE_DESCRIPTION("Ilitek ILI9225 DRM driver"); 443 MODULE_AUTHOR("David Lechner <david@lechnology.com>"); 444 MODULE_LICENSE("GPL"); 445