1 /*
2  * Copyright (C) 2012 Texas Instruments
3  * Author: Rob Clark <robdclark@gmail.com>
4  *
5  * This program is free software; you can redistribute it and/or modify it
6  * under the terms of the GNU General Public License version 2 as published by
7  * the Free Software Foundation.
8  *
9  * This program is distributed in the hope that it will be useful, but WITHOUT
10  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
12  * more details.
13  *
14  * You should have received a copy of the GNU General Public License along with
15  * this program.  If not, see <http://www.gnu.org/licenses/>.
16  */
17 
18 #ifndef __TILCDC_DRV_H__
19 #define __TILCDC_DRV_H__
20 
21 #include <linux/clk.h>
22 #include <linux/cpufreq.h>
23 #include <linux/module.h>
24 #include <linux/platform_device.h>
25 #include <linux/pm.h>
26 #include <linux/pm_runtime.h>
27 #include <linux/slab.h>
28 #include <linux/of.h>
29 #include <linux/of_device.h>
30 #include <linux/list.h>
31 
32 #include <drm/drmP.h>
33 #include <drm/drm_crtc_helper.h>
34 #include <drm/drm_gem_cma_helper.h>
35 #include <drm/drm_fb_cma_helper.h>
36 
37 /* Defaulting to pixel clock defined on AM335x */
38 #define TILCDC_DEFAULT_MAX_PIXELCLOCK  126000
39 /* Defaulting to max width as defined on AM335x */
40 #define TILCDC_DEFAULT_MAX_WIDTH  2048
41 /*
42  * This may need some tweaking, but want to allow at least 1280x1024@60
43  * with optimized DDR & EMIF settings tweaked 1920x1080@24 appears to
44  * be supportable
45  */
46 #define TILCDC_DEFAULT_MAX_BANDWIDTH  (1280*1024*60)
47 
48 
49 struct tilcdc_drm_private {
50 	void __iomem *mmio;
51 
52 	struct clk *disp_clk;    /* display dpll */
53 	struct clk *clk;         /* functional clock */
54 	int rev;                 /* IP revision */
55 
56 	/* don't attempt resolutions w/ higher W * H * Hz: */
57 	uint32_t max_bandwidth;
58 	/*
59 	 * Pixel Clock will be restricted to some value as
60 	 * defined in the device datasheet measured in KHz
61 	 */
62 	uint32_t max_pixelclock;
63 	/*
64 	 * Max allowable width is limited on a per device basis
65 	 * measured in pixels
66 	 */
67 	uint32_t max_width;
68 
69 	/* register contents saved across suspend/resume: */
70 	u32 saved_register[12];
71 
72 #ifdef CONFIG_CPU_FREQ
73 	struct notifier_block freq_transition;
74 	unsigned int lcd_fck_rate;
75 #endif
76 
77 	struct workqueue_struct *wq;
78 
79 	struct drm_fbdev_cma *fbdev;
80 
81 	struct drm_crtc *crtc;
82 
83 	unsigned int num_encoders;
84 	struct drm_encoder *encoders[8];
85 
86 	unsigned int num_connectors;
87 	struct drm_connector *connectors[8];
88 	const struct drm_connector_helper_funcs *connector_funcs[8];
89 
90 	bool is_componentized;
91 };
92 
93 /* Sub-module for display.  Since we don't know at compile time what panels
94  * or display adapter(s) might be present (for ex, off chip dvi/tfp410,
95  * hdmi encoder, various lcd panels), the connector/encoder(s) are split into
96  * separate drivers.  If they are probed and found to be present, they
97  * register themselves with tilcdc_register_module().
98  */
99 struct tilcdc_module;
100 
101 struct tilcdc_module_ops {
102 	/* create appropriate encoders/connectors: */
103 	int (*modeset_init)(struct tilcdc_module *mod, struct drm_device *dev);
104 #ifdef CONFIG_DEBUG_FS
105 	/* create debugfs nodes (can be NULL): */
106 	int (*debugfs_init)(struct tilcdc_module *mod, struct drm_minor *minor);
107 	/* cleanup debugfs nodes (can be NULL): */
108 	void (*debugfs_cleanup)(struct tilcdc_module *mod, struct drm_minor *minor);
109 #endif
110 };
111 
112 struct tilcdc_module {
113 	const char *name;
114 	struct list_head list;
115 	const struct tilcdc_module_ops *funcs;
116 	unsigned int preferred_bpp;
117 };
118 
119 void tilcdc_module_init(struct tilcdc_module *mod, const char *name,
120 		const struct tilcdc_module_ops *funcs);
121 void tilcdc_module_cleanup(struct tilcdc_module *mod);
122 
123 /* Panel config that needs to be set in the crtc, but is not coming from
124  * the mode timings.  The display module is expected to call
125  * tilcdc_crtc_set_panel_info() to set this during modeset.
126  */
127 struct tilcdc_panel_info {
128 
129 	/* AC Bias Pin Frequency */
130 	uint32_t ac_bias;
131 
132 	/* AC Bias Pin Transitions per Interrupt */
133 	uint32_t ac_bias_intrpt;
134 
135 	/* DMA burst size */
136 	uint32_t dma_burst_sz;
137 
138 	/* Bits per pixel */
139 	uint32_t bpp;
140 
141 	/* FIFO DMA Request Delay */
142 	uint32_t fdd;
143 
144 	/* TFT Alternative Signal Mapping (Only for active) */
145 	bool tft_alt_mode;
146 
147 	/* Invert pixel clock */
148 	bool invert_pxl_clk;
149 
150 	/* Horizontal and Vertical Sync Edge: 0=rising 1=falling */
151 	uint32_t sync_edge;
152 
153 	/* Horizontal and Vertical Sync: Control: 0=ignore */
154 	uint32_t sync_ctrl;
155 
156 	/* Raster Data Order Select: 1=Most-to-least 0=Least-to-most */
157 	uint32_t raster_order;
158 
159 	/* DMA FIFO threshold */
160 	uint32_t fifo_th;
161 };
162 
163 #define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__)
164 
165 struct drm_crtc *tilcdc_crtc_create(struct drm_device *dev);
166 void tilcdc_crtc_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file);
167 irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc);
168 void tilcdc_crtc_update_clk(struct drm_crtc *crtc);
169 void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc,
170 		const struct tilcdc_panel_info *info);
171 void tilcdc_crtc_set_simulate_vesa_sync(struct drm_crtc *crtc,
172 					bool simulate_vesa_sync);
173 int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode);
174 int tilcdc_crtc_max_width(struct drm_crtc *crtc);
175 
176 #endif /* __TILCDC_DRV_H__ */
177