1 /* 2 * Copyright (C) 2012 Texas Instruments 3 * Author: Rob Clark <robdclark@gmail.com> 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 as published by 7 * the Free Software Foundation. 8 * 9 * This program is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 * more details. 13 * 14 * You should have received a copy of the GNU General Public License along with 15 * this program. If not, see <http://www.gnu.org/licenses/>. 16 */ 17 18 #ifndef __TILCDC_DRV_H__ 19 #define __TILCDC_DRV_H__ 20 21 #include <linux/clk.h> 22 #include <linux/cpufreq.h> 23 #include <linux/module.h> 24 #include <linux/platform_device.h> 25 #include <linux/pm.h> 26 #include <linux/pm_runtime.h> 27 #include <linux/slab.h> 28 #include <linux/of.h> 29 #include <linux/of_device.h> 30 #include <linux/list.h> 31 32 #include <drm/drmP.h> 33 #include <drm/drm_crtc_helper.h> 34 #include <drm/drm_gem_cma_helper.h> 35 #include <drm/drm_fb_cma_helper.h> 36 #include <drm/drm_bridge.h> 37 38 /* Defaulting to pixel clock defined on AM335x */ 39 #define TILCDC_DEFAULT_MAX_PIXELCLOCK 126000 40 /* Defaulting to max width as defined on AM335x */ 41 #define TILCDC_DEFAULT_MAX_WIDTH 2048 42 /* 43 * This may need some tweaking, but want to allow at least 1280x1024@60 44 * with optimized DDR & EMIF settings tweaked 1920x1080@24 appears to 45 * be supportable 46 */ 47 #define TILCDC_DEFAULT_MAX_BANDWIDTH (1280*1024*60) 48 49 50 struct tilcdc_drm_private { 51 void __iomem *mmio; 52 53 struct clk *clk; /* functional clock */ 54 int rev; /* IP revision */ 55 56 /* don't attempt resolutions w/ higher W * H * Hz: */ 57 uint32_t max_bandwidth; 58 /* 59 * Pixel Clock will be restricted to some value as 60 * defined in the device datasheet measured in KHz 61 */ 62 uint32_t max_pixelclock; 63 /* 64 * Max allowable width is limited on a per device basis 65 * measured in pixels 66 */ 67 uint32_t max_width; 68 69 /* Supported pixel formats */ 70 const uint32_t *pixelformats; 71 uint32_t num_pixelformats; 72 73 #ifdef CONFIG_CPU_FREQ 74 struct notifier_block freq_transition; 75 #endif 76 77 struct workqueue_struct *wq; 78 79 struct drm_crtc *crtc; 80 81 unsigned int num_encoders; 82 struct drm_encoder *encoders[8]; 83 84 unsigned int num_connectors; 85 struct drm_connector *connectors[8]; 86 87 struct drm_encoder *external_encoder; 88 struct drm_connector *external_connector; 89 const struct drm_connector_helper_funcs *connector_funcs; 90 91 bool is_registered; 92 bool is_componentized; 93 }; 94 95 /* Sub-module for display. Since we don't know at compile time what panels 96 * or display adapter(s) might be present (for ex, off chip dvi/tfp410, 97 * hdmi encoder, various lcd panels), the connector/encoder(s) are split into 98 * separate drivers. If they are probed and found to be present, they 99 * register themselves with tilcdc_register_module(). 100 */ 101 struct tilcdc_module; 102 103 struct tilcdc_module_ops { 104 /* create appropriate encoders/connectors: */ 105 int (*modeset_init)(struct tilcdc_module *mod, struct drm_device *dev); 106 #ifdef CONFIG_DEBUG_FS 107 /* create debugfs nodes (can be NULL): */ 108 int (*debugfs_init)(struct tilcdc_module *mod, struct drm_minor *minor); 109 #endif 110 }; 111 112 struct tilcdc_module { 113 const char *name; 114 struct list_head list; 115 const struct tilcdc_module_ops *funcs; 116 }; 117 118 void tilcdc_module_init(struct tilcdc_module *mod, const char *name, 119 const struct tilcdc_module_ops *funcs); 120 void tilcdc_module_cleanup(struct tilcdc_module *mod); 121 122 /* Panel config that needs to be set in the crtc, but is not coming from 123 * the mode timings. The display module is expected to call 124 * tilcdc_crtc_set_panel_info() to set this during modeset. 125 */ 126 struct tilcdc_panel_info { 127 128 /* AC Bias Pin Frequency */ 129 uint32_t ac_bias; 130 131 /* AC Bias Pin Transitions per Interrupt */ 132 uint32_t ac_bias_intrpt; 133 134 /* DMA burst size */ 135 uint32_t dma_burst_sz; 136 137 /* Bits per pixel */ 138 uint32_t bpp; 139 140 /* FIFO DMA Request Delay */ 141 uint32_t fdd; 142 143 /* TFT Alternative Signal Mapping (Only for active) */ 144 bool tft_alt_mode; 145 146 /* Invert pixel clock */ 147 bool invert_pxl_clk; 148 149 /* Horizontal and Vertical Sync Edge: 0=rising 1=falling */ 150 uint32_t sync_edge; 151 152 /* Horizontal and Vertical Sync: Control: 0=ignore */ 153 uint32_t sync_ctrl; 154 155 /* Raster Data Order Select: 1=Most-to-least 0=Least-to-most */ 156 uint32_t raster_order; 157 158 /* DMA FIFO threshold */ 159 uint32_t fifo_th; 160 }; 161 162 #define DBG(fmt, ...) DRM_DEBUG(fmt"\n", ##__VA_ARGS__) 163 164 int tilcdc_crtc_create(struct drm_device *dev); 165 irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc); 166 void tilcdc_crtc_update_clk(struct drm_crtc *crtc); 167 void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc, 168 const struct tilcdc_panel_info *info); 169 void tilcdc_crtc_set_simulate_vesa_sync(struct drm_crtc *crtc, 170 bool simulate_vesa_sync); 171 int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode); 172 int tilcdc_crtc_max_width(struct drm_crtc *crtc); 173 void tilcdc_crtc_shutdown(struct drm_crtc *crtc); 174 int tilcdc_crtc_update_fb(struct drm_crtc *crtc, 175 struct drm_framebuffer *fb, 176 struct drm_pending_vblank_event *event); 177 178 int tilcdc_plane_init(struct drm_device *dev, struct drm_plane *plane); 179 180 #endif /* __TILCDC_DRV_H__ */ 181