1 /* 2 * Copyright (C) 2012 Texas Instruments 3 * Author: Rob Clark <robdclark@gmail.com> 4 * 5 * This program is free software; you can redistribute it and/or modify it 6 * under the terms of the GNU General Public License version 2 as published by 7 * the Free Software Foundation. 8 * 9 * This program is distributed in the hope that it will be useful, but WITHOUT 10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 12 * more details. 13 * 14 * You should have received a copy of the GNU General Public License along with 15 * this program. If not, see <http://www.gnu.org/licenses/>. 16 */ 17 18 #include "drm_flip_work.h" 19 20 #include "tilcdc_drv.h" 21 #include "tilcdc_regs.h" 22 23 struct tilcdc_crtc { 24 struct drm_crtc base; 25 26 const struct tilcdc_panel_info *info; 27 uint32_t dirty; 28 dma_addr_t start, end; 29 struct drm_pending_vblank_event *event; 30 int dpms; 31 wait_queue_head_t frame_done_wq; 32 bool frame_done; 33 34 /* fb currently set to scanout 0/1: */ 35 struct drm_framebuffer *scanout[2]; 36 37 /* for deferred fb unref's: */ 38 struct drm_flip_work unref_work; 39 }; 40 #define to_tilcdc_crtc(x) container_of(x, struct tilcdc_crtc, base) 41 42 static void unref_worker(struct drm_flip_work *work, void *val) 43 { 44 struct tilcdc_crtc *tilcdc_crtc = 45 container_of(work, struct tilcdc_crtc, unref_work); 46 struct drm_device *dev = tilcdc_crtc->base.dev; 47 48 mutex_lock(&dev->mode_config.mutex); 49 drm_framebuffer_unreference(val); 50 mutex_unlock(&dev->mode_config.mutex); 51 } 52 53 static void set_scanout(struct drm_crtc *crtc, int n) 54 { 55 static const uint32_t base_reg[] = { 56 LCDC_DMA_FB_BASE_ADDR_0_REG, 57 LCDC_DMA_FB_BASE_ADDR_1_REG, 58 }; 59 static const uint32_t ceil_reg[] = { 60 LCDC_DMA_FB_CEILING_ADDR_0_REG, 61 LCDC_DMA_FB_CEILING_ADDR_1_REG, 62 }; 63 static const uint32_t stat[] = { 64 LCDC_END_OF_FRAME0, LCDC_END_OF_FRAME1, 65 }; 66 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); 67 struct drm_device *dev = crtc->dev; 68 struct tilcdc_drm_private *priv = dev->dev_private; 69 70 pm_runtime_get_sync(dev->dev); 71 tilcdc_write(dev, base_reg[n], tilcdc_crtc->start); 72 tilcdc_write(dev, ceil_reg[n], tilcdc_crtc->end); 73 if (tilcdc_crtc->scanout[n]) { 74 drm_flip_work_queue(&tilcdc_crtc->unref_work, tilcdc_crtc->scanout[n]); 75 drm_flip_work_commit(&tilcdc_crtc->unref_work, priv->wq); 76 } 77 tilcdc_crtc->scanout[n] = crtc->fb; 78 drm_framebuffer_reference(tilcdc_crtc->scanout[n]); 79 tilcdc_crtc->dirty &= ~stat[n]; 80 pm_runtime_put_sync(dev->dev); 81 } 82 83 static void update_scanout(struct drm_crtc *crtc) 84 { 85 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); 86 struct drm_device *dev = crtc->dev; 87 struct drm_framebuffer *fb = crtc->fb; 88 struct drm_gem_cma_object *gem; 89 unsigned int depth, bpp; 90 91 drm_fb_get_bpp_depth(fb->pixel_format, &depth, &bpp); 92 gem = drm_fb_cma_get_gem_obj(fb, 0); 93 94 tilcdc_crtc->start = gem->paddr + fb->offsets[0] + 95 (crtc->y * fb->pitches[0]) + (crtc->x * bpp/8); 96 97 tilcdc_crtc->end = tilcdc_crtc->start + 98 (crtc->mode.vdisplay * fb->pitches[0]); 99 100 if (tilcdc_crtc->dpms == DRM_MODE_DPMS_ON) { 101 /* already enabled, so just mark the frames that need 102 * updating and they will be updated on vblank: 103 */ 104 tilcdc_crtc->dirty |= LCDC_END_OF_FRAME0 | LCDC_END_OF_FRAME1; 105 drm_vblank_get(dev, 0); 106 } else { 107 /* not enabled yet, so update registers immediately: */ 108 set_scanout(crtc, 0); 109 set_scanout(crtc, 1); 110 } 111 } 112 113 static void start(struct drm_crtc *crtc) 114 { 115 struct drm_device *dev = crtc->dev; 116 struct tilcdc_drm_private *priv = dev->dev_private; 117 118 if (priv->rev == 2) { 119 tilcdc_set(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET); 120 msleep(1); 121 tilcdc_clear(dev, LCDC_CLK_RESET_REG, LCDC_CLK_MAIN_RESET); 122 msleep(1); 123 } 124 125 tilcdc_set(dev, LCDC_DMA_CTRL_REG, LCDC_DUAL_FRAME_BUFFER_ENABLE); 126 tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_PALETTE_LOAD_MODE(DATA_ONLY)); 127 tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE); 128 } 129 130 static void stop(struct drm_crtc *crtc) 131 { 132 struct drm_device *dev = crtc->dev; 133 134 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ENABLE); 135 } 136 137 static void tilcdc_crtc_destroy(struct drm_crtc *crtc) 138 { 139 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); 140 141 WARN_ON(tilcdc_crtc->dpms == DRM_MODE_DPMS_ON); 142 143 drm_crtc_cleanup(crtc); 144 drm_flip_work_cleanup(&tilcdc_crtc->unref_work); 145 146 kfree(tilcdc_crtc); 147 } 148 149 static int tilcdc_crtc_page_flip(struct drm_crtc *crtc, 150 struct drm_framebuffer *fb, 151 struct drm_pending_vblank_event *event, 152 uint32_t page_flip_flags) 153 { 154 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); 155 struct drm_device *dev = crtc->dev; 156 157 if (tilcdc_crtc->event) { 158 dev_err(dev->dev, "already pending page flip!\n"); 159 return -EBUSY; 160 } 161 162 crtc->fb = fb; 163 tilcdc_crtc->event = event; 164 update_scanout(crtc); 165 166 return 0; 167 } 168 169 static void tilcdc_crtc_dpms(struct drm_crtc *crtc, int mode) 170 { 171 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); 172 struct drm_device *dev = crtc->dev; 173 struct tilcdc_drm_private *priv = dev->dev_private; 174 175 /* we really only care about on or off: */ 176 if (mode != DRM_MODE_DPMS_ON) 177 mode = DRM_MODE_DPMS_OFF; 178 179 if (tilcdc_crtc->dpms == mode) 180 return; 181 182 tilcdc_crtc->dpms = mode; 183 184 pm_runtime_get_sync(dev->dev); 185 186 if (mode == DRM_MODE_DPMS_ON) { 187 pm_runtime_forbid(dev->dev); 188 start(crtc); 189 } else { 190 tilcdc_crtc->frame_done = false; 191 stop(crtc); 192 193 /* 194 * if necessary wait for framedone irq which will still come 195 * before putting things to sleep.. 196 */ 197 if (priv->rev == 2) { 198 int ret = wait_event_timeout( 199 tilcdc_crtc->frame_done_wq, 200 tilcdc_crtc->frame_done, 201 msecs_to_jiffies(50)); 202 if (ret == 0) 203 dev_err(dev->dev, "timeout waiting for framedone\n"); 204 } 205 pm_runtime_allow(dev->dev); 206 } 207 208 pm_runtime_put_sync(dev->dev); 209 } 210 211 static bool tilcdc_crtc_mode_fixup(struct drm_crtc *crtc, 212 const struct drm_display_mode *mode, 213 struct drm_display_mode *adjusted_mode) 214 { 215 return true; 216 } 217 218 static void tilcdc_crtc_prepare(struct drm_crtc *crtc) 219 { 220 tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); 221 } 222 223 static void tilcdc_crtc_commit(struct drm_crtc *crtc) 224 { 225 tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_ON); 226 } 227 228 static int tilcdc_crtc_mode_set(struct drm_crtc *crtc, 229 struct drm_display_mode *mode, 230 struct drm_display_mode *adjusted_mode, 231 int x, int y, 232 struct drm_framebuffer *old_fb) 233 { 234 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); 235 struct drm_device *dev = crtc->dev; 236 struct tilcdc_drm_private *priv = dev->dev_private; 237 const struct tilcdc_panel_info *info = tilcdc_crtc->info; 238 uint32_t reg, hbp, hfp, hsw, vbp, vfp, vsw; 239 int ret; 240 241 ret = tilcdc_crtc_mode_valid(crtc, mode); 242 if (WARN_ON(ret)) 243 return ret; 244 245 if (WARN_ON(!info)) 246 return -EINVAL; 247 248 pm_runtime_get_sync(dev->dev); 249 250 /* Configure the Burst Size and fifo threshold of DMA: */ 251 reg = tilcdc_read(dev, LCDC_DMA_CTRL_REG) & ~0x00000770; 252 switch (info->dma_burst_sz) { 253 case 1: 254 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_1); 255 break; 256 case 2: 257 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_2); 258 break; 259 case 4: 260 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_4); 261 break; 262 case 8: 263 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_8); 264 break; 265 case 16: 266 reg |= LCDC_DMA_BURST_SIZE(LCDC_DMA_BURST_16); 267 break; 268 default: 269 return -EINVAL; 270 } 271 reg |= (info->fifo_th << 8); 272 tilcdc_write(dev, LCDC_DMA_CTRL_REG, reg); 273 274 /* Configure timings: */ 275 hbp = mode->htotal - mode->hsync_end; 276 hfp = mode->hsync_start - mode->hdisplay; 277 hsw = mode->hsync_end - mode->hsync_start; 278 vbp = mode->vtotal - mode->vsync_end; 279 vfp = mode->vsync_start - mode->vdisplay; 280 vsw = mode->vsync_end - mode->vsync_start; 281 282 DBG("%dx%d, hbp=%u, hfp=%u, hsw=%u, vbp=%u, vfp=%u, vsw=%u", 283 mode->hdisplay, mode->vdisplay, hbp, hfp, hsw, vbp, vfp, vsw); 284 285 /* Configure the AC Bias Period and Number of Transitions per Interrupt: */ 286 reg = tilcdc_read(dev, LCDC_RASTER_TIMING_2_REG) & ~0x000fff00; 287 reg |= LCDC_AC_BIAS_FREQUENCY(info->ac_bias) | 288 LCDC_AC_BIAS_TRANSITIONS_PER_INT(info->ac_bias_intrpt); 289 290 /* 291 * subtract one from hfp, hbp, hsw because the hardware uses 292 * a value of 0 as 1 293 */ 294 if (priv->rev == 2) { 295 /* clear bits we're going to set */ 296 reg &= ~0x78000033; 297 reg |= ((hfp-1) & 0x300) >> 8; 298 reg |= ((hbp-1) & 0x300) >> 4; 299 reg |= ((hsw-1) & 0x3c0) << 21; 300 } 301 tilcdc_write(dev, LCDC_RASTER_TIMING_2_REG, reg); 302 303 reg = (((mode->hdisplay >> 4) - 1) << 4) | 304 (((hbp-1) & 0xff) << 24) | 305 (((hfp-1) & 0xff) << 16) | 306 (((hsw-1) & 0x3f) << 10); 307 if (priv->rev == 2) 308 reg |= (((mode->hdisplay >> 4) - 1) & 0x40) >> 3; 309 tilcdc_write(dev, LCDC_RASTER_TIMING_0_REG, reg); 310 311 reg = ((mode->vdisplay - 1) & 0x3ff) | 312 ((vbp & 0xff) << 24) | 313 ((vfp & 0xff) << 16) | 314 (((vsw-1) & 0x3f) << 10); 315 tilcdc_write(dev, LCDC_RASTER_TIMING_1_REG, reg); 316 317 /* 318 * be sure to set Bit 10 for the V2 LCDC controller, 319 * otherwise limited to 1024 pixels width, stopping 320 * 1920x1080 being suppoted. 321 */ 322 if (priv->rev == 2) { 323 if ((mode->vdisplay - 1) & 0x400) { 324 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, 325 LCDC_LPP_B10); 326 } else { 327 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, 328 LCDC_LPP_B10); 329 } 330 } 331 332 /* Configure display type: */ 333 reg = tilcdc_read(dev, LCDC_RASTER_CTRL_REG) & 334 ~(LCDC_TFT_MODE | LCDC_MONO_8BIT_MODE | LCDC_MONOCHROME_MODE | 335 LCDC_V2_TFT_24BPP_MODE | LCDC_V2_TFT_24BPP_UNPACK | 0x000ff000); 336 reg |= LCDC_TFT_MODE; /* no monochrome/passive support */ 337 if (info->tft_alt_mode) 338 reg |= LCDC_TFT_ALT_ENABLE; 339 if (priv->rev == 2) { 340 unsigned int depth, bpp; 341 342 drm_fb_get_bpp_depth(crtc->fb->pixel_format, &depth, &bpp); 343 switch (bpp) { 344 case 16: 345 break; 346 case 32: 347 reg |= LCDC_V2_TFT_24BPP_UNPACK; 348 /* fallthrough */ 349 case 24: 350 reg |= LCDC_V2_TFT_24BPP_MODE; 351 break; 352 default: 353 dev_err(dev->dev, "invalid pixel format\n"); 354 return -EINVAL; 355 } 356 } 357 reg |= info->fdd < 12; 358 tilcdc_write(dev, LCDC_RASTER_CTRL_REG, reg); 359 360 if (info->invert_pxl_clk) 361 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK); 362 else 363 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_PIXEL_CLOCK); 364 365 if (info->sync_ctrl) 366 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL); 367 else 368 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_CTRL); 369 370 if (info->sync_edge) 371 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE); 372 else 373 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_SYNC_EDGE); 374 375 /* 376 * use value from adjusted_mode here as this might have been 377 * changed as part of the fixup for slave encoders to solve the 378 * issue where tilcdc timings are not VESA compliant 379 */ 380 if (adjusted_mode->flags & DRM_MODE_FLAG_NHSYNC) 381 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC); 382 else 383 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_HSYNC); 384 385 if (mode->flags & DRM_MODE_FLAG_NVSYNC) 386 tilcdc_set(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC); 387 else 388 tilcdc_clear(dev, LCDC_RASTER_TIMING_2_REG, LCDC_INVERT_VSYNC); 389 390 if (info->raster_order) 391 tilcdc_set(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER); 392 else 393 tilcdc_clear(dev, LCDC_RASTER_CTRL_REG, LCDC_RASTER_ORDER); 394 395 396 update_scanout(crtc); 397 tilcdc_crtc_update_clk(crtc); 398 399 pm_runtime_put_sync(dev->dev); 400 401 return 0; 402 } 403 404 static int tilcdc_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, 405 struct drm_framebuffer *old_fb) 406 { 407 update_scanout(crtc); 408 return 0; 409 } 410 411 static const struct drm_crtc_funcs tilcdc_crtc_funcs = { 412 .destroy = tilcdc_crtc_destroy, 413 .set_config = drm_crtc_helper_set_config, 414 .page_flip = tilcdc_crtc_page_flip, 415 }; 416 417 static const struct drm_crtc_helper_funcs tilcdc_crtc_helper_funcs = { 418 .dpms = tilcdc_crtc_dpms, 419 .mode_fixup = tilcdc_crtc_mode_fixup, 420 .prepare = tilcdc_crtc_prepare, 421 .commit = tilcdc_crtc_commit, 422 .mode_set = tilcdc_crtc_mode_set, 423 .mode_set_base = tilcdc_crtc_mode_set_base, 424 }; 425 426 int tilcdc_crtc_max_width(struct drm_crtc *crtc) 427 { 428 struct drm_device *dev = crtc->dev; 429 struct tilcdc_drm_private *priv = dev->dev_private; 430 int max_width = 0; 431 432 if (priv->rev == 1) 433 max_width = 1024; 434 else if (priv->rev == 2) 435 max_width = 2048; 436 437 return max_width; 438 } 439 440 int tilcdc_crtc_mode_valid(struct drm_crtc *crtc, struct drm_display_mode *mode) 441 { 442 struct tilcdc_drm_private *priv = crtc->dev->dev_private; 443 unsigned int bandwidth; 444 uint32_t hbp, hfp, hsw, vbp, vfp, vsw; 445 446 /* 447 * check to see if the width is within the range that 448 * the LCD Controller physically supports 449 */ 450 if (mode->hdisplay > tilcdc_crtc_max_width(crtc)) 451 return MODE_VIRTUAL_X; 452 453 /* width must be multiple of 16 */ 454 if (mode->hdisplay & 0xf) 455 return MODE_VIRTUAL_X; 456 457 if (mode->vdisplay > 2048) 458 return MODE_VIRTUAL_Y; 459 460 DBG("Processing mode %dx%d@%d with pixel clock %d", 461 mode->hdisplay, mode->vdisplay, 462 drm_mode_vrefresh(mode), mode->clock); 463 464 hbp = mode->htotal - mode->hsync_end; 465 hfp = mode->hsync_start - mode->hdisplay; 466 hsw = mode->hsync_end - mode->hsync_start; 467 vbp = mode->vtotal - mode->vsync_end; 468 vfp = mode->vsync_start - mode->vdisplay; 469 vsw = mode->vsync_end - mode->vsync_start; 470 471 if ((hbp-1) & ~0x3ff) { 472 DBG("Pruning mode: Horizontal Back Porch out of range"); 473 return MODE_HBLANK_WIDE; 474 } 475 476 if ((hfp-1) & ~0x3ff) { 477 DBG("Pruning mode: Horizontal Front Porch out of range"); 478 return MODE_HBLANK_WIDE; 479 } 480 481 if ((hsw-1) & ~0x3ff) { 482 DBG("Pruning mode: Horizontal Sync Width out of range"); 483 return MODE_HSYNC_WIDE; 484 } 485 486 if (vbp & ~0xff) { 487 DBG("Pruning mode: Vertical Back Porch out of range"); 488 return MODE_VBLANK_WIDE; 489 } 490 491 if (vfp & ~0xff) { 492 DBG("Pruning mode: Vertical Front Porch out of range"); 493 return MODE_VBLANK_WIDE; 494 } 495 496 if ((vsw-1) & ~0x3f) { 497 DBG("Pruning mode: Vertical Sync Width out of range"); 498 return MODE_VSYNC_WIDE; 499 } 500 501 /* 502 * some devices have a maximum allowed pixel clock 503 * configured from the DT 504 */ 505 if (mode->clock > priv->max_pixelclock) { 506 DBG("Pruning mode: pixel clock too high"); 507 return MODE_CLOCK_HIGH; 508 } 509 510 /* 511 * some devices further limit the max horizontal resolution 512 * configured from the DT 513 */ 514 if (mode->hdisplay > priv->max_width) 515 return MODE_BAD_WIDTH; 516 517 /* filter out modes that would require too much memory bandwidth: */ 518 bandwidth = mode->hdisplay * mode->vdisplay * 519 drm_mode_vrefresh(mode); 520 if (bandwidth > priv->max_bandwidth) { 521 DBG("Pruning mode: exceeds defined bandwidth limit"); 522 return MODE_BAD; 523 } 524 525 return MODE_OK; 526 } 527 528 void tilcdc_crtc_set_panel_info(struct drm_crtc *crtc, 529 const struct tilcdc_panel_info *info) 530 { 531 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); 532 tilcdc_crtc->info = info; 533 } 534 535 void tilcdc_crtc_update_clk(struct drm_crtc *crtc) 536 { 537 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); 538 struct drm_device *dev = crtc->dev; 539 struct tilcdc_drm_private *priv = dev->dev_private; 540 int dpms = tilcdc_crtc->dpms; 541 unsigned int lcd_clk, div; 542 int ret; 543 544 pm_runtime_get_sync(dev->dev); 545 546 if (dpms == DRM_MODE_DPMS_ON) 547 tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_OFF); 548 549 /* in raster mode, minimum divisor is 2: */ 550 ret = clk_set_rate(priv->disp_clk, crtc->mode.clock * 1000 * 2); 551 if (ret) { 552 dev_err(dev->dev, "failed to set display clock rate to: %d\n", 553 crtc->mode.clock); 554 goto out; 555 } 556 557 lcd_clk = clk_get_rate(priv->clk); 558 div = lcd_clk / (crtc->mode.clock * 1000); 559 560 DBG("lcd_clk=%u, mode clock=%d, div=%u", lcd_clk, crtc->mode.clock, div); 561 DBG("fck=%lu, dpll_disp_ck=%lu", clk_get_rate(priv->clk), clk_get_rate(priv->disp_clk)); 562 563 /* Configure the LCD clock divisor. */ 564 tilcdc_write(dev, LCDC_CTRL_REG, LCDC_CLK_DIVISOR(div) | 565 LCDC_RASTER_MODE); 566 567 if (priv->rev == 2) 568 tilcdc_set(dev, LCDC_CLK_ENABLE_REG, 569 LCDC_V2_DMA_CLK_EN | LCDC_V2_LIDD_CLK_EN | 570 LCDC_V2_CORE_CLK_EN); 571 572 if (dpms == DRM_MODE_DPMS_ON) 573 tilcdc_crtc_dpms(crtc, DRM_MODE_DPMS_ON); 574 575 out: 576 pm_runtime_put_sync(dev->dev); 577 } 578 579 irqreturn_t tilcdc_crtc_irq(struct drm_crtc *crtc) 580 { 581 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); 582 struct drm_device *dev = crtc->dev; 583 struct tilcdc_drm_private *priv = dev->dev_private; 584 uint32_t stat = tilcdc_read_irqstatus(dev); 585 586 if ((stat & LCDC_SYNC_LOST) && (stat & LCDC_FIFO_UNDERFLOW)) { 587 stop(crtc); 588 dev_err(dev->dev, "error: %08x\n", stat); 589 tilcdc_clear_irqstatus(dev, stat); 590 start(crtc); 591 } else if (stat & LCDC_PL_LOAD_DONE) { 592 tilcdc_clear_irqstatus(dev, stat); 593 } else { 594 struct drm_pending_vblank_event *event; 595 unsigned long flags; 596 uint32_t dirty = tilcdc_crtc->dirty & stat; 597 598 tilcdc_clear_irqstatus(dev, stat); 599 600 if (dirty & LCDC_END_OF_FRAME0) 601 set_scanout(crtc, 0); 602 603 if (dirty & LCDC_END_OF_FRAME1) 604 set_scanout(crtc, 1); 605 606 drm_handle_vblank(dev, 0); 607 608 spin_lock_irqsave(&dev->event_lock, flags); 609 event = tilcdc_crtc->event; 610 tilcdc_crtc->event = NULL; 611 if (event) 612 drm_send_vblank_event(dev, 0, event); 613 spin_unlock_irqrestore(&dev->event_lock, flags); 614 615 if (dirty && !tilcdc_crtc->dirty) 616 drm_vblank_put(dev, 0); 617 } 618 619 if (priv->rev == 2) { 620 if (stat & LCDC_FRAME_DONE) { 621 tilcdc_crtc->frame_done = true; 622 wake_up(&tilcdc_crtc->frame_done_wq); 623 } 624 tilcdc_write(dev, LCDC_END_OF_INT_IND_REG, 0); 625 } 626 627 return IRQ_HANDLED; 628 } 629 630 void tilcdc_crtc_cancel_page_flip(struct drm_crtc *crtc, struct drm_file *file) 631 { 632 struct tilcdc_crtc *tilcdc_crtc = to_tilcdc_crtc(crtc); 633 struct drm_pending_vblank_event *event; 634 struct drm_device *dev = crtc->dev; 635 unsigned long flags; 636 637 /* Destroy the pending vertical blanking event associated with the 638 * pending page flip, if any, and disable vertical blanking interrupts. 639 */ 640 spin_lock_irqsave(&dev->event_lock, flags); 641 event = tilcdc_crtc->event; 642 if (event && event->base.file_priv == file) { 643 tilcdc_crtc->event = NULL; 644 event->base.destroy(&event->base); 645 drm_vblank_put(dev, 0); 646 } 647 spin_unlock_irqrestore(&dev->event_lock, flags); 648 } 649 650 struct drm_crtc *tilcdc_crtc_create(struct drm_device *dev) 651 { 652 struct tilcdc_crtc *tilcdc_crtc; 653 struct drm_crtc *crtc; 654 int ret; 655 656 tilcdc_crtc = kzalloc(sizeof(*tilcdc_crtc), GFP_KERNEL); 657 if (!tilcdc_crtc) { 658 dev_err(dev->dev, "allocation failed\n"); 659 return NULL; 660 } 661 662 crtc = &tilcdc_crtc->base; 663 664 tilcdc_crtc->dpms = DRM_MODE_DPMS_OFF; 665 init_waitqueue_head(&tilcdc_crtc->frame_done_wq); 666 667 ret = drm_flip_work_init(&tilcdc_crtc->unref_work, 16, 668 "unref", unref_worker); 669 if (ret) { 670 dev_err(dev->dev, "could not allocate unref FIFO\n"); 671 goto fail; 672 } 673 674 ret = drm_crtc_init(dev, crtc, &tilcdc_crtc_funcs); 675 if (ret < 0) 676 goto fail; 677 678 drm_crtc_helper_add(crtc, &tilcdc_crtc_helper_funcs); 679 680 return crtc; 681 682 fail: 683 tilcdc_crtc_destroy(crtc); 684 return NULL; 685 } 686