1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/ 4 * Author: Tomi Valkeinen <tomi.valkeinen@ti.com> 5 */ 6 7 #include <drm/drm_atomic.h> 8 #include <drm/drm_atomic_helper.h> 9 #include <drm/drm_bridge.h> 10 #include <drm/drm_crtc_helper.h> 11 #include <drm/drm_fb_cma_helper.h> 12 #include <drm/drm_fb_helper.h> 13 #include <drm/drm_gem_framebuffer_helper.h> 14 #include <drm/drm_of.h> 15 #include <drm/drm_panel.h> 16 #include <drm/drm_vblank.h> 17 18 #include "tidss_crtc.h" 19 #include "tidss_dispc.h" 20 #include "tidss_drv.h" 21 #include "tidss_encoder.h" 22 #include "tidss_kms.h" 23 #include "tidss_plane.h" 24 25 static void tidss_atomic_commit_tail(struct drm_atomic_state *old_state) 26 { 27 struct drm_device *ddev = old_state->dev; 28 struct tidss_device *tidss = to_tidss(ddev); 29 30 dev_dbg(ddev->dev, "%s\n", __func__); 31 32 tidss_runtime_get(tidss); 33 34 drm_atomic_helper_commit_modeset_disables(ddev, old_state); 35 drm_atomic_helper_commit_planes(ddev, old_state, 0); 36 drm_atomic_helper_commit_modeset_enables(ddev, old_state); 37 38 drm_atomic_helper_commit_hw_done(old_state); 39 drm_atomic_helper_wait_for_flip_done(ddev, old_state); 40 41 drm_atomic_helper_cleanup_planes(ddev, old_state); 42 43 tidss_runtime_put(tidss); 44 } 45 46 static const struct drm_mode_config_helper_funcs mode_config_helper_funcs = { 47 .atomic_commit_tail = tidss_atomic_commit_tail, 48 }; 49 50 static int tidss_atomic_check(struct drm_device *ddev, 51 struct drm_atomic_state *state) 52 { 53 struct drm_plane_state *opstate; 54 struct drm_plane_state *npstate; 55 struct drm_plane *plane; 56 struct drm_crtc_state *cstate; 57 struct drm_crtc *crtc; 58 int ret, i; 59 60 ret = drm_atomic_helper_check(ddev, state); 61 if (ret) 62 return ret; 63 64 /* 65 * Add all active planes on a CRTC to the atomic state, if 66 * x/y/z position or activity of any plane on that CRTC 67 * changes. This is needed for updating the plane positions in 68 * tidss_crtc_position_planes() which is called from 69 * crtc_atomic_enable() and crtc_atomic_flush(). We have an 70 * extra flag to to mark x,y-position changes and together 71 * with zpos_changed the condition recognizes all the above 72 * cases. 73 */ 74 for_each_oldnew_plane_in_state(state, plane, opstate, npstate, i) { 75 if (!npstate->crtc || !npstate->visible) 76 continue; 77 78 if (!opstate->crtc || opstate->crtc_x != npstate->crtc_x || 79 opstate->crtc_y != npstate->crtc_y) { 80 cstate = drm_atomic_get_crtc_state(state, 81 npstate->crtc); 82 if (IS_ERR(cstate)) 83 return PTR_ERR(cstate); 84 to_tidss_crtc_state(cstate)->plane_pos_changed = true; 85 } 86 } 87 88 for_each_new_crtc_in_state(state, crtc, cstate, i) { 89 if (to_tidss_crtc_state(cstate)->plane_pos_changed || 90 cstate->zpos_changed) { 91 ret = drm_atomic_add_affected_planes(state, crtc); 92 if (ret) 93 return ret; 94 } 95 } 96 97 return 0; 98 } 99 100 static const struct drm_mode_config_funcs mode_config_funcs = { 101 .fb_create = drm_gem_fb_create, 102 .atomic_check = tidss_atomic_check, 103 .atomic_commit = drm_atomic_helper_commit, 104 }; 105 106 static int tidss_dispc_modeset_init(struct tidss_device *tidss) 107 { 108 struct device *dev = tidss->dev; 109 unsigned int fourccs_len; 110 const u32 *fourccs = dispc_plane_formats(tidss->dispc, &fourccs_len); 111 unsigned int i; 112 113 struct pipe { 114 u32 hw_videoport; 115 struct drm_bridge *bridge; 116 u32 enc_type; 117 }; 118 119 const struct dispc_features *feat = tidss->feat; 120 u32 max_vps = feat->num_vps; 121 u32 max_planes = feat->num_planes; 122 123 struct pipe pipes[TIDSS_MAX_PORTS]; 124 u32 num_pipes = 0; 125 u32 crtc_mask; 126 127 /* first find all the connected panels & bridges */ 128 129 for (i = 0; i < max_vps; i++) { 130 struct drm_panel *panel; 131 struct drm_bridge *bridge; 132 u32 enc_type = DRM_MODE_ENCODER_NONE; 133 int ret; 134 135 ret = drm_of_find_panel_or_bridge(dev->of_node, i, 0, 136 &panel, &bridge); 137 if (ret == -ENODEV) { 138 dev_dbg(dev, "no panel/bridge for port %d\n", i); 139 continue; 140 } else if (ret) { 141 dev_dbg(dev, "port %d probe returned %d\n", i, ret); 142 return ret; 143 } 144 145 if (panel) { 146 u32 conn_type; 147 148 dev_dbg(dev, "Setting up panel for port %d\n", i); 149 150 switch (feat->vp_bus_type[i]) { 151 case DISPC_VP_OLDI: 152 enc_type = DRM_MODE_ENCODER_LVDS; 153 conn_type = DRM_MODE_CONNECTOR_LVDS; 154 break; 155 case DISPC_VP_DPI: 156 enc_type = DRM_MODE_ENCODER_DPI; 157 conn_type = DRM_MODE_CONNECTOR_LVDS; 158 break; 159 default: 160 WARN_ON(1); 161 return -EINVAL; 162 } 163 164 if (panel->connector_type != conn_type) { 165 dev_err(dev, 166 "%s: Panel %s has incompatible connector type for vp%d (%d != %d)\n", 167 __func__, dev_name(panel->dev), i, 168 panel->connector_type, conn_type); 169 return -EINVAL; 170 } 171 172 bridge = devm_drm_panel_bridge_add(dev, panel); 173 if (IS_ERR(bridge)) { 174 dev_err(dev, 175 "failed to set up panel bridge for port %d\n", 176 i); 177 return PTR_ERR(bridge); 178 } 179 } 180 181 pipes[num_pipes].hw_videoport = i; 182 pipes[num_pipes].bridge = bridge; 183 pipes[num_pipes].enc_type = enc_type; 184 num_pipes++; 185 } 186 187 /* all planes can be on any crtc */ 188 crtc_mask = (1 << num_pipes) - 1; 189 190 /* then create a plane, a crtc and an encoder for each panel/bridge */ 191 192 for (i = 0; i < num_pipes; ++i) { 193 struct tidss_plane *tplane; 194 struct tidss_crtc *tcrtc; 195 struct drm_encoder *enc; 196 u32 hw_plane_id = feat->vid_order[tidss->num_planes]; 197 int ret; 198 199 tplane = tidss_plane_create(tidss, hw_plane_id, 200 DRM_PLANE_TYPE_PRIMARY, crtc_mask, 201 fourccs, fourccs_len); 202 if (IS_ERR(tplane)) { 203 dev_err(tidss->dev, "plane create failed\n"); 204 return PTR_ERR(tplane); 205 } 206 207 tidss->planes[tidss->num_planes++] = &tplane->plane; 208 209 tcrtc = tidss_crtc_create(tidss, pipes[i].hw_videoport, 210 &tplane->plane); 211 if (IS_ERR(tcrtc)) { 212 dev_err(tidss->dev, "crtc create failed\n"); 213 return PTR_ERR(tcrtc); 214 } 215 216 tidss->crtcs[tidss->num_crtcs++] = &tcrtc->crtc; 217 218 enc = tidss_encoder_create(tidss, pipes[i].enc_type, 219 1 << tcrtc->crtc.index); 220 if (IS_ERR(enc)) { 221 dev_err(tidss->dev, "encoder create failed\n"); 222 return PTR_ERR(enc); 223 } 224 225 ret = drm_bridge_attach(enc, pipes[i].bridge, NULL, 0); 226 if (ret) { 227 dev_err(tidss->dev, "bridge attach failed: %d\n", ret); 228 return ret; 229 } 230 } 231 232 /* create overlay planes of the leftover planes */ 233 234 while (tidss->num_planes < max_planes) { 235 struct tidss_plane *tplane; 236 u32 hw_plane_id = feat->vid_order[tidss->num_planes]; 237 238 tplane = tidss_plane_create(tidss, hw_plane_id, 239 DRM_PLANE_TYPE_OVERLAY, crtc_mask, 240 fourccs, fourccs_len); 241 242 if (IS_ERR(tplane)) { 243 dev_err(tidss->dev, "plane create failed\n"); 244 return PTR_ERR(tplane); 245 } 246 247 tidss->planes[tidss->num_planes++] = &tplane->plane; 248 } 249 250 return 0; 251 } 252 253 int tidss_modeset_init(struct tidss_device *tidss) 254 { 255 struct drm_device *ddev = &tidss->ddev; 256 unsigned int i; 257 int ret; 258 259 dev_dbg(tidss->dev, "%s\n", __func__); 260 261 ret = drmm_mode_config_init(ddev); 262 if (ret) 263 return ret; 264 265 ddev->mode_config.min_width = 8; 266 ddev->mode_config.min_height = 8; 267 ddev->mode_config.max_width = 8096; 268 ddev->mode_config.max_height = 8096; 269 ddev->mode_config.normalize_zpos = true; 270 ddev->mode_config.funcs = &mode_config_funcs; 271 ddev->mode_config.helper_private = &mode_config_helper_funcs; 272 273 ret = tidss_dispc_modeset_init(tidss); 274 if (ret) 275 return ret; 276 277 ret = drm_vblank_init(ddev, tidss->num_crtcs); 278 if (ret) 279 return ret; 280 281 /* Start with vertical blanking interrupt reporting disabled. */ 282 for (i = 0; i < tidss->num_crtcs; ++i) 283 drm_crtc_vblank_reset(tidss->crtcs[i]); 284 285 drm_mode_config_reset(ddev); 286 287 dev_dbg(tidss->dev, "%s done\n", __func__); 288 289 return 0; 290 } 291