1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) 2012 Avionic Design GmbH 4 * Copyright (C) 2012 NVIDIA CORPORATION. All rights reserved. 5 */ 6 7 #include <linux/clk.h> 8 9 #include <drm/drm_atomic_helper.h> 10 #include <drm/drm_panel.h> 11 12 #include "drm.h" 13 #include "dc.h" 14 15 struct tegra_rgb { 16 struct tegra_output output; 17 struct tegra_dc *dc; 18 19 struct clk *clk_parent; 20 struct clk *clk; 21 }; 22 23 static inline struct tegra_rgb *to_rgb(struct tegra_output *output) 24 { 25 return container_of(output, struct tegra_rgb, output); 26 } 27 28 struct reg_entry { 29 unsigned long offset; 30 unsigned long value; 31 }; 32 33 static const struct reg_entry rgb_enable[] = { 34 { DC_COM_PIN_OUTPUT_ENABLE(0), 0x00000000 }, 35 { DC_COM_PIN_OUTPUT_ENABLE(1), 0x00000000 }, 36 { DC_COM_PIN_OUTPUT_ENABLE(2), 0x00000000 }, 37 { DC_COM_PIN_OUTPUT_ENABLE(3), 0x00000000 }, 38 { DC_COM_PIN_OUTPUT_POLARITY(0), 0x00000000 }, 39 { DC_COM_PIN_OUTPUT_POLARITY(1), 0x01000000 }, 40 { DC_COM_PIN_OUTPUT_POLARITY(2), 0x00000000 }, 41 { DC_COM_PIN_OUTPUT_POLARITY(3), 0x00000000 }, 42 { DC_COM_PIN_OUTPUT_DATA(0), 0x00000000 }, 43 { DC_COM_PIN_OUTPUT_DATA(1), 0x00000000 }, 44 { DC_COM_PIN_OUTPUT_DATA(2), 0x00000000 }, 45 { DC_COM_PIN_OUTPUT_DATA(3), 0x00000000 }, 46 { DC_COM_PIN_OUTPUT_SELECT(0), 0x00000000 }, 47 { DC_COM_PIN_OUTPUT_SELECT(1), 0x00000000 }, 48 { DC_COM_PIN_OUTPUT_SELECT(2), 0x00000000 }, 49 { DC_COM_PIN_OUTPUT_SELECT(3), 0x00000000 }, 50 { DC_COM_PIN_OUTPUT_SELECT(4), 0x00210222 }, 51 { DC_COM_PIN_OUTPUT_SELECT(5), 0x00002200 }, 52 { DC_COM_PIN_OUTPUT_SELECT(6), 0x00020000 }, 53 }; 54 55 static const struct reg_entry rgb_disable[] = { 56 { DC_COM_PIN_OUTPUT_SELECT(6), 0x00000000 }, 57 { DC_COM_PIN_OUTPUT_SELECT(5), 0x00000000 }, 58 { DC_COM_PIN_OUTPUT_SELECT(4), 0x00000000 }, 59 { DC_COM_PIN_OUTPUT_SELECT(3), 0x00000000 }, 60 { DC_COM_PIN_OUTPUT_SELECT(2), 0x00000000 }, 61 { DC_COM_PIN_OUTPUT_SELECT(1), 0x00000000 }, 62 { DC_COM_PIN_OUTPUT_SELECT(0), 0x00000000 }, 63 { DC_COM_PIN_OUTPUT_DATA(3), 0xaaaaaaaa }, 64 { DC_COM_PIN_OUTPUT_DATA(2), 0xaaaaaaaa }, 65 { DC_COM_PIN_OUTPUT_DATA(1), 0xaaaaaaaa }, 66 { DC_COM_PIN_OUTPUT_DATA(0), 0xaaaaaaaa }, 67 { DC_COM_PIN_OUTPUT_POLARITY(3), 0x00000000 }, 68 { DC_COM_PIN_OUTPUT_POLARITY(2), 0x00000000 }, 69 { DC_COM_PIN_OUTPUT_POLARITY(1), 0x00000000 }, 70 { DC_COM_PIN_OUTPUT_POLARITY(0), 0x00000000 }, 71 { DC_COM_PIN_OUTPUT_ENABLE(3), 0x55555555 }, 72 { DC_COM_PIN_OUTPUT_ENABLE(2), 0x55555555 }, 73 { DC_COM_PIN_OUTPUT_ENABLE(1), 0x55150005 }, 74 { DC_COM_PIN_OUTPUT_ENABLE(0), 0x55555555 }, 75 }; 76 77 static void tegra_dc_write_regs(struct tegra_dc *dc, 78 const struct reg_entry *table, 79 unsigned int num) 80 { 81 unsigned int i; 82 83 for (i = 0; i < num; i++) 84 tegra_dc_writel(dc, table[i].value, table[i].offset); 85 } 86 87 static const struct drm_connector_funcs tegra_rgb_connector_funcs = { 88 .reset = drm_atomic_helper_connector_reset, 89 .detect = tegra_output_connector_detect, 90 .fill_modes = drm_helper_probe_single_connector_modes, 91 .destroy = tegra_output_connector_destroy, 92 .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, 93 .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, 94 }; 95 96 static enum drm_mode_status 97 tegra_rgb_connector_mode_valid(struct drm_connector *connector, 98 struct drm_display_mode *mode) 99 { 100 /* 101 * FIXME: For now, always assume that the mode is okay. There are 102 * unresolved issues with clk_round_rate(), which doesn't always 103 * reliably report whether a frequency can be set or not. 104 */ 105 return MODE_OK; 106 } 107 108 static const struct drm_connector_helper_funcs tegra_rgb_connector_helper_funcs = { 109 .get_modes = tegra_output_connector_get_modes, 110 .mode_valid = tegra_rgb_connector_mode_valid, 111 }; 112 113 static const struct drm_encoder_funcs tegra_rgb_encoder_funcs = { 114 .destroy = tegra_output_encoder_destroy, 115 }; 116 117 static void tegra_rgb_encoder_disable(struct drm_encoder *encoder) 118 { 119 struct tegra_output *output = encoder_to_output(encoder); 120 struct tegra_rgb *rgb = to_rgb(output); 121 122 if (output->panel) 123 drm_panel_disable(output->panel); 124 125 tegra_dc_write_regs(rgb->dc, rgb_disable, ARRAY_SIZE(rgb_disable)); 126 tegra_dc_commit(rgb->dc); 127 128 if (output->panel) 129 drm_panel_unprepare(output->panel); 130 } 131 132 static void tegra_rgb_encoder_enable(struct drm_encoder *encoder) 133 { 134 struct tegra_output *output = encoder_to_output(encoder); 135 struct tegra_rgb *rgb = to_rgb(output); 136 u32 value; 137 138 if (output->panel) 139 drm_panel_prepare(output->panel); 140 141 tegra_dc_write_regs(rgb->dc, rgb_enable, ARRAY_SIZE(rgb_enable)); 142 143 value = DE_SELECT_ACTIVE | DE_CONTROL_NORMAL; 144 tegra_dc_writel(rgb->dc, value, DC_DISP_DATA_ENABLE_OPTIONS); 145 146 /* XXX: parameterize? */ 147 value = tegra_dc_readl(rgb->dc, DC_COM_PIN_OUTPUT_POLARITY(1)); 148 value &= ~LVS_OUTPUT_POLARITY_LOW; 149 value &= ~LHS_OUTPUT_POLARITY_LOW; 150 tegra_dc_writel(rgb->dc, value, DC_COM_PIN_OUTPUT_POLARITY(1)); 151 152 /* XXX: parameterize? */ 153 value = DISP_DATA_FORMAT_DF1P1C | DISP_ALIGNMENT_MSB | 154 DISP_ORDER_RED_BLUE; 155 tegra_dc_writel(rgb->dc, value, DC_DISP_DISP_INTERFACE_CONTROL); 156 157 /* XXX: parameterize? */ 158 value = SC0_H_QUALIFIER_NONE | SC1_H_QUALIFIER_NONE; 159 tegra_dc_writel(rgb->dc, value, DC_DISP_SHIFT_CLOCK_OPTIONS); 160 161 tegra_dc_commit(rgb->dc); 162 163 if (output->panel) 164 drm_panel_enable(output->panel); 165 } 166 167 static int 168 tegra_rgb_encoder_atomic_check(struct drm_encoder *encoder, 169 struct drm_crtc_state *crtc_state, 170 struct drm_connector_state *conn_state) 171 { 172 struct tegra_output *output = encoder_to_output(encoder); 173 struct tegra_dc *dc = to_tegra_dc(conn_state->crtc); 174 unsigned long pclk = crtc_state->mode.clock * 1000; 175 struct tegra_rgb *rgb = to_rgb(output); 176 unsigned int div; 177 int err; 178 179 /* 180 * We may not want to change the frequency of the parent clock, since 181 * it may be a parent for other peripherals. This is due to the fact 182 * that on Tegra20 there's only a single clock dedicated to display 183 * (pll_d_out0), whereas later generations have a second one that can 184 * be used to independently drive a second output (pll_d2_out0). 185 * 186 * As a way to support multiple outputs on Tegra20 as well, pll_p is 187 * typically used as the parent clock for the display controllers. 188 * But this comes at a cost: pll_p is the parent of several other 189 * peripherals, so its frequency shouldn't change out of the blue. 190 * 191 * The best we can do at this point is to use the shift clock divider 192 * and hope that the desired frequency can be matched (or at least 193 * matched sufficiently close that the panel will still work). 194 */ 195 div = ((clk_get_rate(rgb->clk) * 2) / pclk) - 2; 196 pclk = 0; 197 198 err = tegra_dc_state_setup_clock(dc, crtc_state, rgb->clk_parent, 199 pclk, div); 200 if (err < 0) { 201 dev_err(output->dev, "failed to setup CRTC state: %d\n", err); 202 return err; 203 } 204 205 return err; 206 } 207 208 static const struct drm_encoder_helper_funcs tegra_rgb_encoder_helper_funcs = { 209 .disable = tegra_rgb_encoder_disable, 210 .enable = tegra_rgb_encoder_enable, 211 .atomic_check = tegra_rgb_encoder_atomic_check, 212 }; 213 214 int tegra_dc_rgb_probe(struct tegra_dc *dc) 215 { 216 struct device_node *np; 217 struct tegra_rgb *rgb; 218 int err; 219 220 np = of_get_child_by_name(dc->dev->of_node, "rgb"); 221 if (!np || !of_device_is_available(np)) 222 return -ENODEV; 223 224 rgb = devm_kzalloc(dc->dev, sizeof(*rgb), GFP_KERNEL); 225 if (!rgb) 226 return -ENOMEM; 227 228 rgb->output.dev = dc->dev; 229 rgb->output.of_node = np; 230 rgb->dc = dc; 231 232 err = tegra_output_probe(&rgb->output); 233 if (err < 0) 234 return err; 235 236 rgb->clk = devm_clk_get(dc->dev, NULL); 237 if (IS_ERR(rgb->clk)) { 238 dev_err(dc->dev, "failed to get clock\n"); 239 return PTR_ERR(rgb->clk); 240 } 241 242 rgb->clk_parent = devm_clk_get(dc->dev, "parent"); 243 if (IS_ERR(rgb->clk_parent)) { 244 dev_err(dc->dev, "failed to get parent clock\n"); 245 return PTR_ERR(rgb->clk_parent); 246 } 247 248 err = clk_set_parent(rgb->clk, rgb->clk_parent); 249 if (err < 0) { 250 dev_err(dc->dev, "failed to set parent clock: %d\n", err); 251 return err; 252 } 253 254 dc->rgb = &rgb->output; 255 256 return 0; 257 } 258 259 int tegra_dc_rgb_remove(struct tegra_dc *dc) 260 { 261 if (!dc->rgb) 262 return 0; 263 264 tegra_output_remove(dc->rgb); 265 dc->rgb = NULL; 266 267 return 0; 268 } 269 270 int tegra_dc_rgb_init(struct drm_device *drm, struct tegra_dc *dc) 271 { 272 struct tegra_output *output = dc->rgb; 273 int err; 274 275 if (!dc->rgb) 276 return -ENODEV; 277 278 drm_connector_init(drm, &output->connector, &tegra_rgb_connector_funcs, 279 DRM_MODE_CONNECTOR_LVDS); 280 drm_connector_helper_add(&output->connector, 281 &tegra_rgb_connector_helper_funcs); 282 output->connector.dpms = DRM_MODE_DPMS_OFF; 283 284 drm_encoder_init(drm, &output->encoder, &tegra_rgb_encoder_funcs, 285 DRM_MODE_ENCODER_LVDS, NULL); 286 drm_encoder_helper_add(&output->encoder, 287 &tegra_rgb_encoder_helper_funcs); 288 289 drm_connector_attach_encoder(&output->connector, 290 &output->encoder); 291 drm_connector_register(&output->connector); 292 293 err = tegra_output_init(drm, output); 294 if (err < 0) { 295 dev_err(output->dev, "failed to initialize output: %d\n", err); 296 return err; 297 } 298 299 /* 300 * Other outputs can be attached to either display controller. The RGB 301 * outputs are an exception and work only with their parent display 302 * controller. 303 */ 304 output->encoder.possible_crtcs = drm_crtc_mask(&dc->base); 305 306 return 0; 307 } 308 309 int tegra_dc_rgb_exit(struct tegra_dc *dc) 310 { 311 if (dc->rgb) 312 tegra_output_exit(dc->rgb); 313 314 return 0; 315 } 316