1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Copyright (C) 2015 Free Electrons 4 * Copyright (C) 2015 NextThing Co 5 * 6 * Maxime Ripard <maxime.ripard@free-electrons.com> 7 */ 8 9 #include <linux/component.h> 10 #include <linux/list.h> 11 #include <linux/module.h> 12 #include <linux/of_device.h> 13 #include <linux/of_graph.h> 14 #include <linux/dma-mapping.h> 15 #include <linux/platform_device.h> 16 #include <linux/reset.h> 17 18 #include <drm/drm_atomic.h> 19 #include <drm/drm_atomic_helper.h> 20 #include <drm/drm_crtc.h> 21 #include <drm/drm_fb_cma_helper.h> 22 #include <drm/drm_fourcc.h> 23 #include <drm/drm_gem_cma_helper.h> 24 #include <drm/drm_plane_helper.h> 25 #include <drm/drm_probe_helper.h> 26 27 #include "sun4i_backend.h" 28 #include "sun4i_drv.h" 29 #include "sun4i_frontend.h" 30 #include "sun4i_layer.h" 31 #include "sunxi_engine.h" 32 33 struct sun4i_backend_quirks { 34 /* backend <-> TCON muxing selection done in backend */ 35 bool needs_output_muxing; 36 37 /* alpha at the lowest z position is not always supported */ 38 bool supports_lowest_plane_alpha; 39 }; 40 41 static const u32 sunxi_rgb2yuv_coef[12] = { 42 0x00000107, 0x00000204, 0x00000064, 0x00000108, 43 0x00003f69, 0x00003ed6, 0x000001c1, 0x00000808, 44 0x000001c1, 0x00003e88, 0x00003fb8, 0x00000808 45 }; 46 47 static void sun4i_backend_apply_color_correction(struct sunxi_engine *engine) 48 { 49 int i; 50 51 DRM_DEBUG_DRIVER("Applying RGB to YUV color correction\n"); 52 53 /* Set color correction */ 54 regmap_write(engine->regs, SUN4I_BACKEND_OCCTL_REG, 55 SUN4I_BACKEND_OCCTL_ENABLE); 56 57 for (i = 0; i < 12; i++) 58 regmap_write(engine->regs, SUN4I_BACKEND_OCRCOEF_REG(i), 59 sunxi_rgb2yuv_coef[i]); 60 } 61 62 static void sun4i_backend_disable_color_correction(struct sunxi_engine *engine) 63 { 64 DRM_DEBUG_DRIVER("Disabling color correction\n"); 65 66 /* Disable color correction */ 67 regmap_update_bits(engine->regs, SUN4I_BACKEND_OCCTL_REG, 68 SUN4I_BACKEND_OCCTL_ENABLE, 0); 69 } 70 71 static void sun4i_backend_commit(struct sunxi_engine *engine) 72 { 73 DRM_DEBUG_DRIVER("Committing changes\n"); 74 75 regmap_write(engine->regs, SUN4I_BACKEND_REGBUFFCTL_REG, 76 SUN4I_BACKEND_REGBUFFCTL_AUTOLOAD_DIS | 77 SUN4I_BACKEND_REGBUFFCTL_LOADCTL); 78 } 79 80 void sun4i_backend_layer_enable(struct sun4i_backend *backend, 81 int layer, bool enable) 82 { 83 u32 val; 84 85 DRM_DEBUG_DRIVER("%sabling layer %d\n", enable ? "En" : "Dis", 86 layer); 87 88 if (enable) 89 val = SUN4I_BACKEND_MODCTL_LAY_EN(layer); 90 else 91 val = 0; 92 93 regmap_update_bits(backend->engine.regs, SUN4I_BACKEND_MODCTL_REG, 94 SUN4I_BACKEND_MODCTL_LAY_EN(layer), val); 95 } 96 97 static int sun4i_backend_drm_format_to_layer(u32 format, u32 *mode) 98 { 99 switch (format) { 100 case DRM_FORMAT_ARGB8888: 101 *mode = SUN4I_BACKEND_LAY_FBFMT_ARGB8888; 102 break; 103 104 case DRM_FORMAT_ARGB4444: 105 *mode = SUN4I_BACKEND_LAY_FBFMT_ARGB4444; 106 break; 107 108 case DRM_FORMAT_ARGB1555: 109 *mode = SUN4I_BACKEND_LAY_FBFMT_ARGB1555; 110 break; 111 112 case DRM_FORMAT_RGBA5551: 113 *mode = SUN4I_BACKEND_LAY_FBFMT_RGBA5551; 114 break; 115 116 case DRM_FORMAT_RGBA4444: 117 *mode = SUN4I_BACKEND_LAY_FBFMT_RGBA4444; 118 break; 119 120 case DRM_FORMAT_XRGB8888: 121 *mode = SUN4I_BACKEND_LAY_FBFMT_XRGB8888; 122 break; 123 124 case DRM_FORMAT_RGB888: 125 *mode = SUN4I_BACKEND_LAY_FBFMT_RGB888; 126 break; 127 128 case DRM_FORMAT_RGB565: 129 *mode = SUN4I_BACKEND_LAY_FBFMT_RGB565; 130 break; 131 132 default: 133 return -EINVAL; 134 } 135 136 return 0; 137 } 138 139 static const uint32_t sun4i_backend_formats[] = { 140 DRM_FORMAT_ARGB1555, 141 DRM_FORMAT_ARGB4444, 142 DRM_FORMAT_ARGB8888, 143 DRM_FORMAT_RGB565, 144 DRM_FORMAT_RGB888, 145 DRM_FORMAT_RGBA4444, 146 DRM_FORMAT_RGBA5551, 147 DRM_FORMAT_UYVY, 148 DRM_FORMAT_VYUY, 149 DRM_FORMAT_XRGB8888, 150 DRM_FORMAT_YUYV, 151 DRM_FORMAT_YVYU, 152 }; 153 154 bool sun4i_backend_format_is_supported(uint32_t fmt, uint64_t modifier) 155 { 156 unsigned int i; 157 158 if (modifier != DRM_FORMAT_MOD_LINEAR) 159 return false; 160 161 for (i = 0; i < ARRAY_SIZE(sun4i_backend_formats); i++) 162 if (sun4i_backend_formats[i] == fmt) 163 return true; 164 165 return false; 166 } 167 168 int sun4i_backend_update_layer_coord(struct sun4i_backend *backend, 169 int layer, struct drm_plane *plane) 170 { 171 struct drm_plane_state *state = plane->state; 172 173 DRM_DEBUG_DRIVER("Updating layer %d\n", layer); 174 175 if (plane->type == DRM_PLANE_TYPE_PRIMARY) { 176 DRM_DEBUG_DRIVER("Primary layer, updating global size W: %u H: %u\n", 177 state->crtc_w, state->crtc_h); 178 regmap_write(backend->engine.regs, SUN4I_BACKEND_DISSIZE_REG, 179 SUN4I_BACKEND_DISSIZE(state->crtc_w, 180 state->crtc_h)); 181 } 182 183 /* Set height and width */ 184 DRM_DEBUG_DRIVER("Layer size W: %u H: %u\n", 185 state->crtc_w, state->crtc_h); 186 regmap_write(backend->engine.regs, SUN4I_BACKEND_LAYSIZE_REG(layer), 187 SUN4I_BACKEND_LAYSIZE(state->crtc_w, 188 state->crtc_h)); 189 190 /* Set base coordinates */ 191 DRM_DEBUG_DRIVER("Layer coordinates X: %d Y: %d\n", 192 state->crtc_x, state->crtc_y); 193 regmap_write(backend->engine.regs, SUN4I_BACKEND_LAYCOOR_REG(layer), 194 SUN4I_BACKEND_LAYCOOR(state->crtc_x, 195 state->crtc_y)); 196 197 return 0; 198 } 199 200 static int sun4i_backend_update_yuv_format(struct sun4i_backend *backend, 201 int layer, struct drm_plane *plane) 202 { 203 struct drm_plane_state *state = plane->state; 204 struct drm_framebuffer *fb = state->fb; 205 const struct drm_format_info *format = fb->format; 206 const uint32_t fmt = format->format; 207 u32 val = SUN4I_BACKEND_IYUVCTL_EN; 208 int i; 209 210 for (i = 0; i < ARRAY_SIZE(sunxi_bt601_yuv2rgb_coef); i++) 211 regmap_write(backend->engine.regs, 212 SUN4I_BACKEND_YGCOEF_REG(i), 213 sunxi_bt601_yuv2rgb_coef[i]); 214 215 /* 216 * We should do that only for a single plane, but the 217 * framebuffer's atomic_check has our back on this. 218 */ 219 regmap_update_bits(backend->engine.regs, SUN4I_BACKEND_ATTCTL_REG0(layer), 220 SUN4I_BACKEND_ATTCTL_REG0_LAY_YUVEN, 221 SUN4I_BACKEND_ATTCTL_REG0_LAY_YUVEN); 222 223 /* TODO: Add support for the multi-planar YUV formats */ 224 if (drm_format_info_is_yuv_packed(format) && 225 drm_format_info_is_yuv_sampling_422(format)) 226 val |= SUN4I_BACKEND_IYUVCTL_FBFMT_PACKED_YUV422; 227 else 228 DRM_DEBUG_DRIVER("Unsupported YUV format (0x%x)\n", fmt); 229 230 /* 231 * Allwinner seems to list the pixel sequence from right to left, while 232 * DRM lists it from left to right. 233 */ 234 switch (fmt) { 235 case DRM_FORMAT_YUYV: 236 val |= SUN4I_BACKEND_IYUVCTL_FBPS_VYUY; 237 break; 238 case DRM_FORMAT_YVYU: 239 val |= SUN4I_BACKEND_IYUVCTL_FBPS_UYVY; 240 break; 241 case DRM_FORMAT_UYVY: 242 val |= SUN4I_BACKEND_IYUVCTL_FBPS_YVYU; 243 break; 244 case DRM_FORMAT_VYUY: 245 val |= SUN4I_BACKEND_IYUVCTL_FBPS_YUYV; 246 break; 247 default: 248 DRM_DEBUG_DRIVER("Unsupported YUV pixel sequence (0x%x)\n", 249 fmt); 250 } 251 252 regmap_write(backend->engine.regs, SUN4I_BACKEND_IYUVCTL_REG, val); 253 254 return 0; 255 } 256 257 int sun4i_backend_update_layer_formats(struct sun4i_backend *backend, 258 int layer, struct drm_plane *plane) 259 { 260 struct drm_plane_state *state = plane->state; 261 struct drm_framebuffer *fb = state->fb; 262 bool interlaced = false; 263 u32 val; 264 int ret; 265 266 /* Clear the YUV mode */ 267 regmap_update_bits(backend->engine.regs, SUN4I_BACKEND_ATTCTL_REG0(layer), 268 SUN4I_BACKEND_ATTCTL_REG0_LAY_YUVEN, 0); 269 270 if (plane->state->crtc) 271 interlaced = plane->state->crtc->state->adjusted_mode.flags 272 & DRM_MODE_FLAG_INTERLACE; 273 274 regmap_update_bits(backend->engine.regs, SUN4I_BACKEND_MODCTL_REG, 275 SUN4I_BACKEND_MODCTL_ITLMOD_EN, 276 interlaced ? SUN4I_BACKEND_MODCTL_ITLMOD_EN : 0); 277 278 DRM_DEBUG_DRIVER("Switching display backend interlaced mode %s\n", 279 interlaced ? "on" : "off"); 280 281 val = SUN4I_BACKEND_ATTCTL_REG0_LAY_GLBALPHA(state->alpha >> 8); 282 if (state->alpha != DRM_BLEND_ALPHA_OPAQUE) 283 val |= SUN4I_BACKEND_ATTCTL_REG0_LAY_GLBALPHA_EN; 284 regmap_update_bits(backend->engine.regs, 285 SUN4I_BACKEND_ATTCTL_REG0(layer), 286 SUN4I_BACKEND_ATTCTL_REG0_LAY_GLBALPHA_MASK | 287 SUN4I_BACKEND_ATTCTL_REG0_LAY_GLBALPHA_EN, 288 val); 289 290 if (fb->format->is_yuv) 291 return sun4i_backend_update_yuv_format(backend, layer, plane); 292 293 ret = sun4i_backend_drm_format_to_layer(fb->format->format, &val); 294 if (ret) { 295 DRM_DEBUG_DRIVER("Invalid format\n"); 296 return ret; 297 } 298 299 regmap_update_bits(backend->engine.regs, 300 SUN4I_BACKEND_ATTCTL_REG1(layer), 301 SUN4I_BACKEND_ATTCTL_REG1_LAY_FBFMT, val); 302 303 return 0; 304 } 305 306 int sun4i_backend_update_layer_frontend(struct sun4i_backend *backend, 307 int layer, uint32_t fmt) 308 { 309 u32 val; 310 int ret; 311 312 ret = sun4i_backend_drm_format_to_layer(fmt, &val); 313 if (ret) { 314 DRM_DEBUG_DRIVER("Invalid format\n"); 315 return ret; 316 } 317 318 regmap_update_bits(backend->engine.regs, 319 SUN4I_BACKEND_ATTCTL_REG0(layer), 320 SUN4I_BACKEND_ATTCTL_REG0_LAY_VDOEN, 321 SUN4I_BACKEND_ATTCTL_REG0_LAY_VDOEN); 322 323 regmap_update_bits(backend->engine.regs, 324 SUN4I_BACKEND_ATTCTL_REG1(layer), 325 SUN4I_BACKEND_ATTCTL_REG1_LAY_FBFMT, val); 326 327 return 0; 328 } 329 330 static int sun4i_backend_update_yuv_buffer(struct sun4i_backend *backend, 331 struct drm_framebuffer *fb, 332 dma_addr_t paddr) 333 { 334 /* TODO: Add support for the multi-planar YUV formats */ 335 DRM_DEBUG_DRIVER("Setting packed YUV buffer address to %pad\n", &paddr); 336 regmap_write(backend->engine.regs, SUN4I_BACKEND_IYUVADD_REG(0), paddr); 337 338 DRM_DEBUG_DRIVER("Layer line width: %d bits\n", fb->pitches[0] * 8); 339 regmap_write(backend->engine.regs, SUN4I_BACKEND_IYUVLINEWIDTH_REG(0), 340 fb->pitches[0] * 8); 341 342 return 0; 343 } 344 345 int sun4i_backend_update_layer_buffer(struct sun4i_backend *backend, 346 int layer, struct drm_plane *plane) 347 { 348 struct drm_plane_state *state = plane->state; 349 struct drm_framebuffer *fb = state->fb; 350 u32 lo_paddr, hi_paddr; 351 dma_addr_t paddr; 352 353 /* Set the line width */ 354 DRM_DEBUG_DRIVER("Layer line width: %d bits\n", fb->pitches[0] * 8); 355 regmap_write(backend->engine.regs, 356 SUN4I_BACKEND_LAYLINEWIDTH_REG(layer), 357 fb->pitches[0] * 8); 358 359 /* Get the start of the displayed memory */ 360 paddr = drm_fb_cma_get_gem_addr(fb, state, 0); 361 DRM_DEBUG_DRIVER("Setting buffer address to %pad\n", &paddr); 362 363 if (fb->format->is_yuv) 364 return sun4i_backend_update_yuv_buffer(backend, fb, paddr); 365 366 /* Write the 32 lower bits of the address (in bits) */ 367 lo_paddr = paddr << 3; 368 DRM_DEBUG_DRIVER("Setting address lower bits to 0x%x\n", lo_paddr); 369 regmap_write(backend->engine.regs, 370 SUN4I_BACKEND_LAYFB_L32ADD_REG(layer), 371 lo_paddr); 372 373 /* And the upper bits */ 374 hi_paddr = paddr >> 29; 375 DRM_DEBUG_DRIVER("Setting address high bits to 0x%x\n", hi_paddr); 376 regmap_update_bits(backend->engine.regs, SUN4I_BACKEND_LAYFB_H4ADD_REG, 377 SUN4I_BACKEND_LAYFB_H4ADD_MSK(layer), 378 SUN4I_BACKEND_LAYFB_H4ADD(layer, hi_paddr)); 379 380 return 0; 381 } 382 383 int sun4i_backend_update_layer_zpos(struct sun4i_backend *backend, int layer, 384 struct drm_plane *plane) 385 { 386 struct drm_plane_state *state = plane->state; 387 struct sun4i_layer_state *p_state = state_to_sun4i_layer_state(state); 388 unsigned int priority = state->normalized_zpos; 389 unsigned int pipe = p_state->pipe; 390 391 DRM_DEBUG_DRIVER("Setting layer %d's priority to %d and pipe %d\n", 392 layer, priority, pipe); 393 regmap_update_bits(backend->engine.regs, SUN4I_BACKEND_ATTCTL_REG0(layer), 394 SUN4I_BACKEND_ATTCTL_REG0_LAY_PIPESEL_MASK | 395 SUN4I_BACKEND_ATTCTL_REG0_LAY_PRISEL_MASK, 396 SUN4I_BACKEND_ATTCTL_REG0_LAY_PIPESEL(p_state->pipe) | 397 SUN4I_BACKEND_ATTCTL_REG0_LAY_PRISEL(priority)); 398 399 return 0; 400 } 401 402 void sun4i_backend_cleanup_layer(struct sun4i_backend *backend, 403 int layer) 404 { 405 regmap_update_bits(backend->engine.regs, 406 SUN4I_BACKEND_ATTCTL_REG0(layer), 407 SUN4I_BACKEND_ATTCTL_REG0_LAY_VDOEN | 408 SUN4I_BACKEND_ATTCTL_REG0_LAY_YUVEN, 0); 409 } 410 411 static bool sun4i_backend_plane_uses_scaler(struct drm_plane_state *state) 412 { 413 u16 src_h = state->src_h >> 16; 414 u16 src_w = state->src_w >> 16; 415 416 DRM_DEBUG_DRIVER("Input size %dx%d, output size %dx%d\n", 417 src_w, src_h, state->crtc_w, state->crtc_h); 418 419 if ((state->crtc_h != src_h) || (state->crtc_w != src_w)) 420 return true; 421 422 return false; 423 } 424 425 static bool sun4i_backend_plane_uses_frontend(struct drm_plane_state *state) 426 { 427 struct sun4i_layer *layer = plane_to_sun4i_layer(state->plane); 428 struct sun4i_backend *backend = layer->backend; 429 uint32_t format = state->fb->format->format; 430 uint64_t modifier = state->fb->modifier; 431 432 if (IS_ERR(backend->frontend)) 433 return false; 434 435 if (!sun4i_frontend_format_is_supported(format, modifier)) 436 return false; 437 438 if (!sun4i_backend_format_is_supported(format, modifier)) 439 return true; 440 441 /* 442 * TODO: The backend alone allows 2x and 4x integer scaling, including 443 * support for an alpha component (which the frontend doesn't support). 444 * Use the backend directly instead of the frontend in this case, with 445 * another test to return false. 446 */ 447 448 if (sun4i_backend_plane_uses_scaler(state)) 449 return true; 450 451 /* 452 * Here the format is supported by both the frontend and the backend 453 * and no frontend scaling is required, so use the backend directly. 454 */ 455 return false; 456 } 457 458 static bool sun4i_backend_plane_is_supported(struct drm_plane_state *state, 459 bool *uses_frontend) 460 { 461 if (sun4i_backend_plane_uses_frontend(state)) { 462 *uses_frontend = true; 463 return true; 464 } 465 466 *uses_frontend = false; 467 468 /* Scaling is not supported without the frontend. */ 469 if (sun4i_backend_plane_uses_scaler(state)) 470 return false; 471 472 return true; 473 } 474 475 static void sun4i_backend_atomic_begin(struct sunxi_engine *engine, 476 struct drm_crtc_state *old_state) 477 { 478 u32 val; 479 480 WARN_ON(regmap_read_poll_timeout(engine->regs, 481 SUN4I_BACKEND_REGBUFFCTL_REG, 482 val, !(val & SUN4I_BACKEND_REGBUFFCTL_LOADCTL), 483 100, 50000)); 484 } 485 486 static int sun4i_backend_atomic_check(struct sunxi_engine *engine, 487 struct drm_crtc_state *crtc_state) 488 { 489 struct drm_plane_state *plane_states[SUN4I_BACKEND_NUM_LAYERS] = { 0 }; 490 struct sun4i_backend *backend = engine_to_sun4i_backend(engine); 491 struct drm_atomic_state *state = crtc_state->state; 492 struct drm_device *drm = state->dev; 493 struct drm_plane *plane; 494 unsigned int num_planes = 0; 495 unsigned int num_alpha_planes = 0; 496 unsigned int num_frontend_planes = 0; 497 unsigned int num_alpha_planes_max = 1; 498 unsigned int num_yuv_planes = 0; 499 unsigned int current_pipe = 0; 500 unsigned int i; 501 502 DRM_DEBUG_DRIVER("Starting checking our planes\n"); 503 504 if (!crtc_state->planes_changed) 505 return 0; 506 507 drm_for_each_plane_mask(plane, drm, crtc_state->plane_mask) { 508 struct drm_plane_state *plane_state = 509 drm_atomic_get_plane_state(state, plane); 510 struct sun4i_layer_state *layer_state = 511 state_to_sun4i_layer_state(plane_state); 512 struct drm_framebuffer *fb = plane_state->fb; 513 struct drm_format_name_buf format_name; 514 515 if (!sun4i_backend_plane_is_supported(plane_state, 516 &layer_state->uses_frontend)) 517 return -EINVAL; 518 519 if (layer_state->uses_frontend) { 520 DRM_DEBUG_DRIVER("Using the frontend for plane %d\n", 521 plane->index); 522 num_frontend_planes++; 523 } else { 524 if (fb->format->is_yuv) { 525 DRM_DEBUG_DRIVER("Plane FB format is YUV\n"); 526 num_yuv_planes++; 527 } 528 } 529 530 DRM_DEBUG_DRIVER("Plane FB format is %s\n", 531 drm_get_format_name(fb->format->format, 532 &format_name)); 533 if (fb->format->has_alpha || (plane_state->alpha != DRM_BLEND_ALPHA_OPAQUE)) 534 num_alpha_planes++; 535 536 DRM_DEBUG_DRIVER("Plane zpos is %d\n", 537 plane_state->normalized_zpos); 538 539 /* Sort our planes by Zpos */ 540 plane_states[plane_state->normalized_zpos] = plane_state; 541 542 num_planes++; 543 } 544 545 /* All our planes were disabled, bail out */ 546 if (!num_planes) 547 return 0; 548 549 /* 550 * The hardware is a bit unusual here. 551 * 552 * Even though it supports 4 layers, it does the composition 553 * in two separate steps. 554 * 555 * The first one is assigning a layer to one of its two 556 * pipes. If more that 1 layer is assigned to the same pipe, 557 * and if pixels overlaps, the pipe will take the pixel from 558 * the layer with the highest priority. 559 * 560 * The second step is the actual alpha blending, that takes 561 * the two pipes as input, and uses the potential alpha 562 * component to do the transparency between the two. 563 * 564 * This two-step scenario makes us unable to guarantee a 565 * robust alpha blending between the 4 layers in all 566 * situations, since this means that we need to have one layer 567 * with alpha at the lowest position of our two pipes. 568 * 569 * However, we cannot even do that on every platform, since 570 * the hardware has a bug where the lowest plane of the lowest 571 * pipe (pipe 0, priority 0), if it has any alpha, will 572 * discard the pixel data entirely and just display the pixels 573 * in the background color (black by default). 574 * 575 * This means that on the affected platforms, we effectively 576 * have only three valid configurations with alpha, all of 577 * them with the alpha being on pipe1 with the lowest 578 * position, which can be 1, 2 or 3 depending on the number of 579 * planes and their zpos. 580 */ 581 582 /* For platforms that are not affected by the issue described above. */ 583 if (backend->quirks->supports_lowest_plane_alpha) 584 num_alpha_planes_max++; 585 586 if (num_alpha_planes > num_alpha_planes_max) { 587 DRM_DEBUG_DRIVER("Too many planes with alpha, rejecting...\n"); 588 return -EINVAL; 589 } 590 591 /* We can't have an alpha plane at the lowest position */ 592 if (!backend->quirks->supports_lowest_plane_alpha && 593 (plane_states[0]->fb->format->has_alpha || 594 (plane_states[0]->alpha != DRM_BLEND_ALPHA_OPAQUE))) 595 return -EINVAL; 596 597 for (i = 1; i < num_planes; i++) { 598 struct drm_plane_state *p_state = plane_states[i]; 599 struct drm_framebuffer *fb = p_state->fb; 600 struct sun4i_layer_state *s_state = state_to_sun4i_layer_state(p_state); 601 602 /* 603 * The only alpha position is the lowest plane of the 604 * second pipe. 605 */ 606 if (fb->format->has_alpha || (p_state->alpha != DRM_BLEND_ALPHA_OPAQUE)) 607 current_pipe++; 608 609 s_state->pipe = current_pipe; 610 } 611 612 /* We can only have a single YUV plane at a time */ 613 if (num_yuv_planes > SUN4I_BACKEND_NUM_YUV_PLANES) { 614 DRM_DEBUG_DRIVER("Too many planes with YUV, rejecting...\n"); 615 return -EINVAL; 616 } 617 618 if (num_frontend_planes > SUN4I_BACKEND_NUM_FRONTEND_LAYERS) { 619 DRM_DEBUG_DRIVER("Too many planes going through the frontend, rejecting\n"); 620 return -EINVAL; 621 } 622 623 DRM_DEBUG_DRIVER("State valid with %u planes, %u alpha, %u video, %u YUV\n", 624 num_planes, num_alpha_planes, num_frontend_planes, 625 num_yuv_planes); 626 627 return 0; 628 } 629 630 static void sun4i_backend_vblank_quirk(struct sunxi_engine *engine) 631 { 632 struct sun4i_backend *backend = engine_to_sun4i_backend(engine); 633 struct sun4i_frontend *frontend = backend->frontend; 634 635 if (!frontend) 636 return; 637 638 /* 639 * In a teardown scenario with the frontend involved, we have 640 * to keep the frontend enabled until the next vblank, and 641 * only then disable it. 642 * 643 * This is due to the fact that the backend will not take into 644 * account the new configuration (with the plane that used to 645 * be fed by the frontend now disabled) until we write to the 646 * commit bit and the hardware fetches the new configuration 647 * during the next vblank. 648 * 649 * So we keep the frontend around in order to prevent any 650 * visual artifacts. 651 */ 652 spin_lock(&backend->frontend_lock); 653 if (backend->frontend_teardown) { 654 sun4i_frontend_exit(frontend); 655 backend->frontend_teardown = false; 656 } 657 spin_unlock(&backend->frontend_lock); 658 }; 659 660 static int sun4i_backend_init_sat(struct device *dev) { 661 struct sun4i_backend *backend = dev_get_drvdata(dev); 662 int ret; 663 664 backend->sat_reset = devm_reset_control_get(dev, "sat"); 665 if (IS_ERR(backend->sat_reset)) { 666 dev_err(dev, "Couldn't get the SAT reset line\n"); 667 return PTR_ERR(backend->sat_reset); 668 } 669 670 ret = reset_control_deassert(backend->sat_reset); 671 if (ret) { 672 dev_err(dev, "Couldn't deassert the SAT reset line\n"); 673 return ret; 674 } 675 676 backend->sat_clk = devm_clk_get(dev, "sat"); 677 if (IS_ERR(backend->sat_clk)) { 678 dev_err(dev, "Couldn't get our SAT clock\n"); 679 ret = PTR_ERR(backend->sat_clk); 680 goto err_assert_reset; 681 } 682 683 ret = clk_prepare_enable(backend->sat_clk); 684 if (ret) { 685 dev_err(dev, "Couldn't enable the SAT clock\n"); 686 return ret; 687 } 688 689 return 0; 690 691 err_assert_reset: 692 reset_control_assert(backend->sat_reset); 693 return ret; 694 } 695 696 static int sun4i_backend_free_sat(struct device *dev) { 697 struct sun4i_backend *backend = dev_get_drvdata(dev); 698 699 clk_disable_unprepare(backend->sat_clk); 700 reset_control_assert(backend->sat_reset); 701 702 return 0; 703 } 704 705 /* 706 * The display backend can take video output from the display frontend, or 707 * the display enhancement unit on the A80, as input for one it its layers. 708 * This relationship within the display pipeline is encoded in the device 709 * tree with of_graph, and we use it here to figure out which backend, if 710 * there are 2 or more, we are currently probing. The number would be in 711 * the "reg" property of the upstream output port endpoint. 712 */ 713 static int sun4i_backend_of_get_id(struct device_node *node) 714 { 715 struct device_node *ep, *remote; 716 struct of_endpoint of_ep; 717 718 /* Input port is 0, and we want the first endpoint. */ 719 ep = of_graph_get_endpoint_by_regs(node, 0, -1); 720 if (!ep) 721 return -EINVAL; 722 723 remote = of_graph_get_remote_endpoint(ep); 724 of_node_put(ep); 725 if (!remote) 726 return -EINVAL; 727 728 of_graph_parse_endpoint(remote, &of_ep); 729 of_node_put(remote); 730 return of_ep.id; 731 } 732 733 /* TODO: This needs to take multiple pipelines into account */ 734 static struct sun4i_frontend *sun4i_backend_find_frontend(struct sun4i_drv *drv, 735 struct device_node *node) 736 { 737 struct device_node *port, *ep, *remote; 738 struct sun4i_frontend *frontend; 739 740 port = of_graph_get_port_by_id(node, 0); 741 if (!port) 742 return ERR_PTR(-EINVAL); 743 744 for_each_available_child_of_node(port, ep) { 745 remote = of_graph_get_remote_port_parent(ep); 746 if (!remote) 747 continue; 748 of_node_put(remote); 749 750 /* does this node match any registered engines? */ 751 list_for_each_entry(frontend, &drv->frontend_list, list) { 752 if (remote == frontend->node) { 753 of_node_put(port); 754 of_node_put(ep); 755 return frontend; 756 } 757 } 758 } 759 of_node_put(port); 760 return ERR_PTR(-EINVAL); 761 } 762 763 static const struct sunxi_engine_ops sun4i_backend_engine_ops = { 764 .atomic_begin = sun4i_backend_atomic_begin, 765 .atomic_check = sun4i_backend_atomic_check, 766 .commit = sun4i_backend_commit, 767 .layers_init = sun4i_layers_init, 768 .apply_color_correction = sun4i_backend_apply_color_correction, 769 .disable_color_correction = sun4i_backend_disable_color_correction, 770 .vblank_quirk = sun4i_backend_vblank_quirk, 771 }; 772 773 static struct regmap_config sun4i_backend_regmap_config = { 774 .reg_bits = 32, 775 .val_bits = 32, 776 .reg_stride = 4, 777 .max_register = 0x5800, 778 }; 779 780 static int sun4i_backend_bind(struct device *dev, struct device *master, 781 void *data) 782 { 783 struct platform_device *pdev = to_platform_device(dev); 784 struct drm_device *drm = data; 785 struct sun4i_drv *drv = drm->dev_private; 786 struct sun4i_backend *backend; 787 const struct sun4i_backend_quirks *quirks; 788 struct resource *res; 789 void __iomem *regs; 790 int i, ret; 791 792 backend = devm_kzalloc(dev, sizeof(*backend), GFP_KERNEL); 793 if (!backend) 794 return -ENOMEM; 795 dev_set_drvdata(dev, backend); 796 spin_lock_init(&backend->frontend_lock); 797 798 if (of_find_property(dev->of_node, "interconnects", NULL)) { 799 /* 800 * This assume we have the same DMA constraints for all our the 801 * devices in our pipeline (all the backends, but also the 802 * frontends). This sounds bad, but it has always been the case 803 * for us, and DRM doesn't do per-device allocation either, so 804 * we would need to fix DRM first... 805 */ 806 ret = of_dma_configure(drm->dev, dev->of_node, true); 807 if (ret) 808 return ret; 809 } else { 810 /* 811 * If we don't have the interconnect property, most likely 812 * because of an old DT, we need to set the DMA offset by hand 813 * on our device since the RAM mapping is at 0 for the DMA bus, 814 * unlike the CPU. 815 * 816 * XXX(hch): this has no business in a driver and needs to move 817 * to the device tree. 818 */ 819 ret = dma_direct_set_offset(drm->dev, PHYS_OFFSET, 0, SZ_4G); 820 if (ret) 821 return ret; 822 } 823 824 backend->engine.node = dev->of_node; 825 backend->engine.ops = &sun4i_backend_engine_ops; 826 backend->engine.id = sun4i_backend_of_get_id(dev->of_node); 827 if (backend->engine.id < 0) 828 return backend->engine.id; 829 830 backend->frontend = sun4i_backend_find_frontend(drv, dev->of_node); 831 if (IS_ERR(backend->frontend)) 832 dev_warn(dev, "Couldn't find matching frontend, frontend features disabled\n"); 833 834 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 835 regs = devm_ioremap_resource(dev, res); 836 if (IS_ERR(regs)) 837 return PTR_ERR(regs); 838 839 backend->reset = devm_reset_control_get(dev, NULL); 840 if (IS_ERR(backend->reset)) { 841 dev_err(dev, "Couldn't get our reset line\n"); 842 return PTR_ERR(backend->reset); 843 } 844 845 ret = reset_control_deassert(backend->reset); 846 if (ret) { 847 dev_err(dev, "Couldn't deassert our reset line\n"); 848 return ret; 849 } 850 851 backend->bus_clk = devm_clk_get(dev, "ahb"); 852 if (IS_ERR(backend->bus_clk)) { 853 dev_err(dev, "Couldn't get the backend bus clock\n"); 854 ret = PTR_ERR(backend->bus_clk); 855 goto err_assert_reset; 856 } 857 clk_prepare_enable(backend->bus_clk); 858 859 backend->mod_clk = devm_clk_get(dev, "mod"); 860 if (IS_ERR(backend->mod_clk)) { 861 dev_err(dev, "Couldn't get the backend module clock\n"); 862 ret = PTR_ERR(backend->mod_clk); 863 goto err_disable_bus_clk; 864 } 865 866 ret = clk_set_rate_exclusive(backend->mod_clk, 300000000); 867 if (ret) { 868 dev_err(dev, "Couldn't set the module clock frequency\n"); 869 goto err_disable_bus_clk; 870 } 871 872 clk_prepare_enable(backend->mod_clk); 873 874 backend->ram_clk = devm_clk_get(dev, "ram"); 875 if (IS_ERR(backend->ram_clk)) { 876 dev_err(dev, "Couldn't get the backend RAM clock\n"); 877 ret = PTR_ERR(backend->ram_clk); 878 goto err_disable_mod_clk; 879 } 880 clk_prepare_enable(backend->ram_clk); 881 882 if (of_device_is_compatible(dev->of_node, 883 "allwinner,sun8i-a33-display-backend")) { 884 ret = sun4i_backend_init_sat(dev); 885 if (ret) { 886 dev_err(dev, "Couldn't init SAT resources\n"); 887 goto err_disable_ram_clk; 888 } 889 } 890 891 backend->engine.regs = devm_regmap_init_mmio(dev, regs, 892 &sun4i_backend_regmap_config); 893 if (IS_ERR(backend->engine.regs)) { 894 dev_err(dev, "Couldn't create the backend regmap\n"); 895 return PTR_ERR(backend->engine.regs); 896 } 897 898 list_add_tail(&backend->engine.list, &drv->engine_list); 899 900 /* 901 * Many of the backend's layer configuration registers have 902 * undefined default values. This poses a risk as we use 903 * regmap_update_bits in some places, and don't overwrite 904 * the whole register. 905 * 906 * Clear the registers here to have something predictable. 907 */ 908 for (i = 0x800; i < 0x1000; i += 4) 909 regmap_write(backend->engine.regs, i, 0); 910 911 /* Disable registers autoloading */ 912 regmap_write(backend->engine.regs, SUN4I_BACKEND_REGBUFFCTL_REG, 913 SUN4I_BACKEND_REGBUFFCTL_AUTOLOAD_DIS); 914 915 /* Enable the backend */ 916 regmap_write(backend->engine.regs, SUN4I_BACKEND_MODCTL_REG, 917 SUN4I_BACKEND_MODCTL_DEBE_EN | 918 SUN4I_BACKEND_MODCTL_START_CTL); 919 920 /* Set output selection if needed */ 921 quirks = of_device_get_match_data(dev); 922 if (quirks->needs_output_muxing) { 923 /* 924 * We assume there is no dynamic muxing of backends 925 * and TCONs, so we select the backend with same ID. 926 * 927 * While dynamic selection might be interesting, since 928 * the CRTC is tied to the TCON, while the layers are 929 * tied to the backends, this means, we will need to 930 * switch between groups of layers. There might not be 931 * a way to represent this constraint in DRM. 932 */ 933 regmap_update_bits(backend->engine.regs, 934 SUN4I_BACKEND_MODCTL_REG, 935 SUN4I_BACKEND_MODCTL_OUT_SEL, 936 (backend->engine.id 937 ? SUN4I_BACKEND_MODCTL_OUT_LCD1 938 : SUN4I_BACKEND_MODCTL_OUT_LCD0)); 939 } 940 941 backend->quirks = quirks; 942 943 return 0; 944 945 err_disable_ram_clk: 946 clk_disable_unprepare(backend->ram_clk); 947 err_disable_mod_clk: 948 clk_rate_exclusive_put(backend->mod_clk); 949 clk_disable_unprepare(backend->mod_clk); 950 err_disable_bus_clk: 951 clk_disable_unprepare(backend->bus_clk); 952 err_assert_reset: 953 reset_control_assert(backend->reset); 954 return ret; 955 } 956 957 static void sun4i_backend_unbind(struct device *dev, struct device *master, 958 void *data) 959 { 960 struct sun4i_backend *backend = dev_get_drvdata(dev); 961 962 list_del(&backend->engine.list); 963 964 if (of_device_is_compatible(dev->of_node, 965 "allwinner,sun8i-a33-display-backend")) 966 sun4i_backend_free_sat(dev); 967 968 clk_disable_unprepare(backend->ram_clk); 969 clk_rate_exclusive_put(backend->mod_clk); 970 clk_disable_unprepare(backend->mod_clk); 971 clk_disable_unprepare(backend->bus_clk); 972 reset_control_assert(backend->reset); 973 } 974 975 static const struct component_ops sun4i_backend_ops = { 976 .bind = sun4i_backend_bind, 977 .unbind = sun4i_backend_unbind, 978 }; 979 980 static int sun4i_backend_probe(struct platform_device *pdev) 981 { 982 return component_add(&pdev->dev, &sun4i_backend_ops); 983 } 984 985 static int sun4i_backend_remove(struct platform_device *pdev) 986 { 987 component_del(&pdev->dev, &sun4i_backend_ops); 988 989 return 0; 990 } 991 992 static const struct sun4i_backend_quirks sun4i_backend_quirks = { 993 .needs_output_muxing = true, 994 }; 995 996 static const struct sun4i_backend_quirks sun5i_backend_quirks = { 997 }; 998 999 static const struct sun4i_backend_quirks sun6i_backend_quirks = { 1000 }; 1001 1002 static const struct sun4i_backend_quirks sun7i_backend_quirks = { 1003 .needs_output_muxing = true, 1004 .supports_lowest_plane_alpha = true, 1005 }; 1006 1007 static const struct sun4i_backend_quirks sun8i_a33_backend_quirks = { 1008 .supports_lowest_plane_alpha = true, 1009 }; 1010 1011 static const struct sun4i_backend_quirks sun9i_backend_quirks = { 1012 }; 1013 1014 static const struct of_device_id sun4i_backend_of_table[] = { 1015 { 1016 .compatible = "allwinner,sun4i-a10-display-backend", 1017 .data = &sun4i_backend_quirks, 1018 }, 1019 { 1020 .compatible = "allwinner,sun5i-a13-display-backend", 1021 .data = &sun5i_backend_quirks, 1022 }, 1023 { 1024 .compatible = "allwinner,sun6i-a31-display-backend", 1025 .data = &sun6i_backend_quirks, 1026 }, 1027 { 1028 .compatible = "allwinner,sun7i-a20-display-backend", 1029 .data = &sun7i_backend_quirks, 1030 }, 1031 { 1032 .compatible = "allwinner,sun8i-a23-display-backend", 1033 .data = &sun8i_a33_backend_quirks, 1034 }, 1035 { 1036 .compatible = "allwinner,sun8i-a33-display-backend", 1037 .data = &sun8i_a33_backend_quirks, 1038 }, 1039 { 1040 .compatible = "allwinner,sun9i-a80-display-backend", 1041 .data = &sun9i_backend_quirks, 1042 }, 1043 { } 1044 }; 1045 MODULE_DEVICE_TABLE(of, sun4i_backend_of_table); 1046 1047 static struct platform_driver sun4i_backend_platform_driver = { 1048 .probe = sun4i_backend_probe, 1049 .remove = sun4i_backend_remove, 1050 .driver = { 1051 .name = "sun4i-backend", 1052 .of_match_table = sun4i_backend_of_table, 1053 }, 1054 }; 1055 module_platform_driver(sun4i_backend_platform_driver); 1056 1057 MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>"); 1058 MODULE_DESCRIPTION("Allwinner A10 Display Backend Driver"); 1059 MODULE_LICENSE("GPL"); 1060