1 /*
2  * Copyright (C) STMicroelectronics SA 2017
3  *
4  * Authors: Philippe Cornu <philippe.cornu@st.com>
5  *          Yannick Fertre <yannick.fertre@st.com>
6  *
7  * License terms:  GNU General Public License (GPL), version 2
8  */
9 
10 #include <linux/clk.h>
11 #include <linux/iopoll.h>
12 #include <linux/module.h>
13 #include <drm/drmP.h>
14 #include <drm/drm_mipi_dsi.h>
15 #include <drm/bridge/dw_mipi_dsi.h>
16 #include <video/mipi_display.h>
17 
18 /* DSI wrapper register & bit definitions */
19 /* Note: registers are named as in the Reference Manual */
20 #define DSI_WCFGR	0x0400		/* Wrapper ConFiGuration Reg */
21 #define WCFGR_DSIM	BIT(0)		/* DSI Mode */
22 #define WCFGR_COLMUX	GENMASK(3, 1)	/* COLor MUltipleXing */
23 
24 #define DSI_WCR		0x0404		/* Wrapper Control Reg */
25 #define WCR_DSIEN	BIT(3)		/* DSI ENable */
26 
27 #define DSI_WISR	0x040C		/* Wrapper Interrupt and Status Reg */
28 #define WISR_PLLLS	BIT(8)		/* PLL Lock Status */
29 #define WISR_RRS	BIT(12)		/* Regulator Ready Status */
30 
31 #define DSI_WPCR0	0x0418		/* Wrapper Phy Conf Reg 0 */
32 #define WPCR0_UIX4	GENMASK(5, 0)	/* Unit Interval X 4 */
33 #define WPCR0_TDDL	BIT(16)		/* Turn Disable Data Lanes */
34 
35 #define DSI_WRPCR	0x0430		/* Wrapper Regulator & Pll Ctrl Reg */
36 #define WRPCR_PLLEN	BIT(0)		/* PLL ENable */
37 #define WRPCR_NDIV	GENMASK(8, 2)	/* pll loop DIVision Factor */
38 #define WRPCR_IDF	GENMASK(14, 11)	/* pll Input Division Factor */
39 #define WRPCR_ODF	GENMASK(17, 16)	/* pll Output Division Factor */
40 #define WRPCR_REGEN	BIT(24)		/* REGulator ENable */
41 #define WRPCR_BGREN	BIT(28)		/* BandGap Reference ENable */
42 #define IDF_MIN		1
43 #define IDF_MAX		7
44 #define NDIV_MIN	10
45 #define NDIV_MAX	125
46 #define ODF_MIN		1
47 #define ODF_MAX		8
48 
49 /* dsi color format coding according to the datasheet */
50 enum dsi_color {
51 	DSI_RGB565_CONF1,
52 	DSI_RGB565_CONF2,
53 	DSI_RGB565_CONF3,
54 	DSI_RGB666_CONF1,
55 	DSI_RGB666_CONF2,
56 	DSI_RGB888,
57 };
58 
59 #define LANE_MIN_KBPS	31250
60 #define LANE_MAX_KBPS	500000
61 
62 /* Sleep & timeout for regulator on/off, pll lock/unlock & fifo empty */
63 #define SLEEP_US	1000
64 #define TIMEOUT_US	200000
65 
66 struct dw_mipi_dsi_stm {
67 	void __iomem *base;
68 	struct clk *pllref_clk;
69 };
70 
71 static inline void dsi_write(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 val)
72 {
73 	writel(val, dsi->base + reg);
74 }
75 
76 static inline u32 dsi_read(struct dw_mipi_dsi_stm *dsi, u32 reg)
77 {
78 	return readl(dsi->base + reg);
79 }
80 
81 static inline void dsi_set(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 mask)
82 {
83 	dsi_write(dsi, reg, dsi_read(dsi, reg) | mask);
84 }
85 
86 static inline void dsi_clear(struct dw_mipi_dsi_stm *dsi, u32 reg, u32 mask)
87 {
88 	dsi_write(dsi, reg, dsi_read(dsi, reg) & ~mask);
89 }
90 
91 static inline void dsi_update_bits(struct dw_mipi_dsi_stm *dsi, u32 reg,
92 				   u32 mask, u32 val)
93 {
94 	dsi_write(dsi, reg, (dsi_read(dsi, reg) & ~mask) | val);
95 }
96 
97 static enum dsi_color dsi_color_from_mipi(enum mipi_dsi_pixel_format fmt)
98 {
99 	switch (fmt) {
100 	case MIPI_DSI_FMT_RGB888:
101 		return DSI_RGB888;
102 	case MIPI_DSI_FMT_RGB666:
103 		return DSI_RGB666_CONF2;
104 	case MIPI_DSI_FMT_RGB666_PACKED:
105 		return DSI_RGB666_CONF1;
106 	case MIPI_DSI_FMT_RGB565:
107 		return DSI_RGB565_CONF1;
108 	default:
109 		DRM_DEBUG_DRIVER("MIPI color invalid, so we use rgb888\n");
110 	}
111 	return DSI_RGB888;
112 }
113 
114 static int dsi_pll_get_clkout_khz(int clkin_khz, int idf, int ndiv, int odf)
115 {
116 	/* prevent from division by 0 */
117 	if (idf * odf)
118 		return DIV_ROUND_CLOSEST(clkin_khz * ndiv, idf * odf);
119 
120 	return 0;
121 }
122 
123 static int dsi_pll_get_params(int clkin_khz, int clkout_khz,
124 			      int *idf, int *ndiv, int *odf)
125 {
126 	int i, o, n, n_min, n_max;
127 	int fvco_min, fvco_max, delta, best_delta; /* all in khz */
128 
129 	/* Early checks preventing division by 0 & odd results */
130 	if ((clkin_khz <= 0) || (clkout_khz <= 0))
131 		return -EINVAL;
132 
133 	fvco_min = LANE_MIN_KBPS * 2 * ODF_MAX;
134 	fvco_max = LANE_MAX_KBPS * 2 * ODF_MIN;
135 
136 	best_delta = 1000000; /* big started value (1000000khz) */
137 
138 	for (i = IDF_MIN; i <= IDF_MAX; i++) {
139 		/* Compute ndiv range according to Fvco */
140 		n_min = ((fvco_min * i) / (2 * clkin_khz)) + 1;
141 		n_max = (fvco_max * i) / (2 * clkin_khz);
142 
143 		/* No need to continue idf loop if we reach ndiv max */
144 		if (n_min >= NDIV_MAX)
145 			break;
146 
147 		/* Clamp ndiv to valid values */
148 		if (n_min < NDIV_MIN)
149 			n_min = NDIV_MIN;
150 		if (n_max > NDIV_MAX)
151 			n_max = NDIV_MAX;
152 
153 		for (o = ODF_MIN; o <= ODF_MAX; o *= 2) {
154 			n = DIV_ROUND_CLOSEST(i * o * clkout_khz, clkin_khz);
155 			/* Check ndiv according to vco range */
156 			if ((n < n_min) || (n > n_max))
157 				continue;
158 			/* Check if new delta is better & saves parameters */
159 			delta = dsi_pll_get_clkout_khz(clkin_khz, i, n, o) -
160 				clkout_khz;
161 			if (delta < 0)
162 				delta = -delta;
163 			if (delta < best_delta) {
164 				*idf = i;
165 				*ndiv = n;
166 				*odf = o;
167 				best_delta = delta;
168 			}
169 			/* fast return in case of "perfect result" */
170 			if (!delta)
171 				return 0;
172 		}
173 	}
174 
175 	return 0;
176 }
177 
178 static int dw_mipi_dsi_phy_init(void *priv_data)
179 {
180 	struct dw_mipi_dsi_stm *dsi = priv_data;
181 	u32 val;
182 	int ret;
183 
184 	/* Enable the regulator */
185 	dsi_set(dsi, DSI_WRPCR, WRPCR_REGEN | WRPCR_BGREN);
186 	ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_RRS,
187 				 SLEEP_US, TIMEOUT_US);
188 	if (ret)
189 		DRM_DEBUG_DRIVER("!TIMEOUT! waiting REGU, let's continue\n");
190 
191 	/* Enable the DSI PLL & wait for its lock */
192 	dsi_set(dsi, DSI_WRPCR, WRPCR_PLLEN);
193 	ret = readl_poll_timeout(dsi->base + DSI_WISR, val, val & WISR_PLLLS,
194 				 SLEEP_US, TIMEOUT_US);
195 	if (ret)
196 		DRM_DEBUG_DRIVER("!TIMEOUT! waiting PLL, let's continue\n");
197 
198 	/* Enable the DSI wrapper */
199 	dsi_set(dsi, DSI_WCR, WCR_DSIEN);
200 
201 	return 0;
202 }
203 
204 static int
205 dw_mipi_dsi_get_lane_mbps(void *priv_data, struct drm_display_mode *mode,
206 			  unsigned long mode_flags, u32 lanes, u32 format,
207 			  unsigned int *lane_mbps)
208 {
209 	struct dw_mipi_dsi_stm *dsi = priv_data;
210 	unsigned int idf, ndiv, odf, pll_in_khz, pll_out_khz;
211 	int ret, bpp;
212 	u32 val;
213 
214 	pll_in_khz = (unsigned int)(clk_get_rate(dsi->pllref_clk) / 1000);
215 
216 	/* Compute requested pll out */
217 	bpp = mipi_dsi_pixel_format_to_bpp(format);
218 	pll_out_khz = mode->clock * bpp / lanes;
219 	/* Add 20% to pll out to be higher than pixel bw (burst mode only) */
220 	pll_out_khz = (pll_out_khz * 12) / 10;
221 	if (pll_out_khz > LANE_MAX_KBPS) {
222 		pll_out_khz = LANE_MAX_KBPS;
223 		DRM_WARN("Warning max phy mbps is used\n");
224 	}
225 	if (pll_out_khz < LANE_MIN_KBPS) {
226 		pll_out_khz = LANE_MIN_KBPS;
227 		DRM_WARN("Warning min phy mbps is used\n");
228 	}
229 
230 	/* Compute best pll parameters */
231 	idf = 0;
232 	ndiv = 0;
233 	odf = 0;
234 	ret = dsi_pll_get_params(pll_in_khz, pll_out_khz, &idf, &ndiv, &odf);
235 	if (ret)
236 		DRM_WARN("Warning dsi_pll_get_params(): bad params\n");
237 
238 	/* Get the adjusted pll out value */
239 	pll_out_khz = dsi_pll_get_clkout_khz(pll_in_khz, idf, ndiv, odf);
240 
241 	/* Set the PLL division factors */
242 	dsi_update_bits(dsi, DSI_WRPCR,	WRPCR_NDIV | WRPCR_IDF | WRPCR_ODF,
243 			(ndiv << 2) | (idf << 11) | ((ffs(odf) - 1) << 16));
244 
245 	/* Compute uix4 & set the bit period in high-speed mode */
246 	val = 4000000 / pll_out_khz;
247 	dsi_update_bits(dsi, DSI_WPCR0, WPCR0_UIX4, val);
248 
249 	/* Select video mode by resetting DSIM bit */
250 	dsi_clear(dsi, DSI_WCFGR, WCFGR_DSIM);
251 
252 	/* Select the color coding */
253 	dsi_update_bits(dsi, DSI_WCFGR, WCFGR_COLMUX,
254 			dsi_color_from_mipi(format) << 1);
255 
256 	*lane_mbps = pll_out_khz / 1000;
257 
258 	DRM_DEBUG_DRIVER("pll_in %ukHz pll_out %ukHz lane_mbps %uMHz\n",
259 			 pll_in_khz, pll_out_khz, *lane_mbps);
260 
261 	return 0;
262 }
263 
264 static struct dw_mipi_dsi_phy_ops dw_mipi_dsi_stm_phy_ops = {
265 	.init = dw_mipi_dsi_phy_init,
266 	.get_lane_mbps = dw_mipi_dsi_get_lane_mbps,
267 };
268 
269 static struct dw_mipi_dsi_plat_data dw_mipi_dsi_stm_plat_data = {
270 	.max_data_lanes = 2,
271 	.phy_ops = &dw_mipi_dsi_stm_phy_ops,
272 };
273 
274 static const struct of_device_id dw_mipi_dsi_stm_dt_ids[] = {
275 	{ .compatible = "st,stm32-dsi", .data = &dw_mipi_dsi_stm_plat_data, },
276 	{ },
277 };
278 MODULE_DEVICE_TABLE(of, dw_mipi_dsi_stm_dt_ids);
279 
280 static int dw_mipi_dsi_stm_probe(struct platform_device *pdev)
281 {
282 	struct device *dev = &pdev->dev;
283 	struct dw_mipi_dsi_stm *dsi;
284 	struct resource *res;
285 	int ret;
286 
287 	dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
288 	if (!dsi)
289 		return -ENOMEM;
290 
291 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
292 	if (!res) {
293 		DRM_ERROR("Unable to get resource\n");
294 		return -ENODEV;
295 	}
296 
297 	dsi->base = devm_ioremap_resource(dev, res);
298 	if (IS_ERR(dsi->base)) {
299 		DRM_ERROR("Unable to get dsi registers\n");
300 		return PTR_ERR(dsi->base);
301 	}
302 
303 	dsi->pllref_clk = devm_clk_get(dev, "ref");
304 	if (IS_ERR(dsi->pllref_clk)) {
305 		ret = PTR_ERR(dsi->pllref_clk);
306 		dev_err(dev, "Unable to get pll reference clock: %d\n", ret);
307 		return ret;
308 	}
309 
310 	ret = clk_prepare_enable(dsi->pllref_clk);
311 	if (ret) {
312 		dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__);
313 		return ret;
314 	}
315 
316 	dw_mipi_dsi_stm_plat_data.base = dsi->base;
317 	dw_mipi_dsi_stm_plat_data.priv_data = dsi;
318 
319 	ret = dw_mipi_dsi_probe(pdev, &dw_mipi_dsi_stm_plat_data);
320 	if (ret) {
321 		DRM_ERROR("Failed to initialize mipi dsi host\n");
322 		clk_disable_unprepare(dsi->pllref_clk);
323 	}
324 
325 	return ret;
326 }
327 
328 static int dw_mipi_dsi_stm_remove(struct platform_device *pdev)
329 {
330 	struct dw_mipi_dsi_stm *dsi = dw_mipi_dsi_stm_plat_data.priv_data;
331 
332 	clk_disable_unprepare(dsi->pllref_clk);
333 	dw_mipi_dsi_remove(pdev);
334 
335 	return 0;
336 }
337 
338 static struct platform_driver dw_mipi_dsi_stm_driver = {
339 	.probe		= dw_mipi_dsi_stm_probe,
340 	.remove		= dw_mipi_dsi_stm_remove,
341 	.driver		= {
342 		.of_match_table = dw_mipi_dsi_stm_dt_ids,
343 		.name	= "dw_mipi_dsi-stm",
344 	},
345 };
346 
347 module_platform_driver(dw_mipi_dsi_stm_driver);
348 
349 MODULE_AUTHOR("Philippe Cornu <philippe.cornu@st.com>");
350 MODULE_AUTHOR("Yannick Fertre <yannick.fertre@st.com>");
351 MODULE_DESCRIPTION("STMicroelectronics DW MIPI DSI host controller driver");
352 MODULE_LICENSE("GPL v2");
353