xref: /openbmc/linux/drivers/gpu/drm/sprd/sprd_dsi.h (revision 85250a24)
1 /* SPDX-License-Identifier: GPL-2.0 */
2 /*
3  * Copyright (C) 2020 Unisoc Inc.
4  */
5 
6 #ifndef __SPRD_DSI_H__
7 #define __SPRD_DSI_H__
8 
9 #include <linux/of.h>
10 #include <linux/device.h>
11 #include <linux/regmap.h>
12 #include <video/videomode.h>
13 
14 #include <drm/drm_bridge.h>
15 #include <drm/drm_connector.h>
16 #include <drm/drm_encoder.h>
17 #include <drm/drm_mipi_dsi.h>
18 #include <drm/drm_print.h>
19 #include <drm/drm_panel.h>
20 
21 #define encoder_to_dsi(encoder) \
22 	container_of(encoder, struct sprd_dsi, encoder)
23 
24 enum dsi_work_mode {
25 	DSI_MODE_CMD = 0,
26 	DSI_MODE_VIDEO
27 };
28 
29 enum video_burst_mode {
30 	VIDEO_NON_BURST_WITH_SYNC_PULSES = 0,
31 	VIDEO_NON_BURST_WITH_SYNC_EVENTS,
32 	VIDEO_BURST_WITH_SYNC_PULSES
33 };
34 
35 enum dsi_color_coding {
36 	COLOR_CODE_16BIT_CONFIG1 = 0,
37 	COLOR_CODE_16BIT_CONFIG2,
38 	COLOR_CODE_16BIT_CONFIG3,
39 	COLOR_CODE_18BIT_CONFIG1,
40 	COLOR_CODE_18BIT_CONFIG2,
41 	COLOR_CODE_24BIT,
42 	COLOR_CODE_20BIT_YCC422_LOOSELY,
43 	COLOR_CODE_24BIT_YCC422,
44 	COLOR_CODE_16BIT_YCC422,
45 	COLOR_CODE_30BIT,
46 	COLOR_CODE_36BIT,
47 	COLOR_CODE_12BIT_YCC420,
48 	COLOR_CODE_COMPRESSTION,
49 	COLOR_CODE_MAX
50 };
51 
52 enum pll_timing {
53 	NONE,
54 	REQUEST_TIME,
55 	PREPARE_TIME,
56 	SETTLE_TIME,
57 	ZERO_TIME,
58 	TRAIL_TIME,
59 	EXIT_TIME,
60 	CLKPOST_TIME,
61 	TA_GET,
62 	TA_GO,
63 	TA_SURE,
64 	TA_WAIT,
65 };
66 
67 struct dphy_pll {
68 	u8 refin; /* Pre-divider control signal */
69 	u8 cp_s; /* 00: SDM_EN=1, 10: SDM_EN=0 */
70 	u8 fdk_s; /* PLL mode control: integer or fraction */
71 	u8 sdm_en;
72 	u8 div;
73 	u8 int_n; /* integer N PLL */
74 	u32 ref_clk; /* dphy reference clock, unit: MHz */
75 	u32 freq; /* panel config, unit: KHz */
76 	u32 fvco;
77 	u32 potential_fvco;
78 	u32 nint; /* sigma delta modulator NINT control */
79 	u32 kint; /* sigma delta modulator KINT control */
80 	u8 lpf_sel; /* low pass filter control */
81 	u8 out_sel; /* post divider control */
82 	u8 vco_band; /* vco range */
83 	u8 det_delay;
84 };
85 
86 struct dsi_context {
87 	void __iomem *base;
88 	struct regmap *regmap;
89 	struct dphy_pll pll;
90 	struct videomode vm;
91 	bool enabled;
92 
93 	u8 work_mode;
94 	u8 burst_mode;
95 	u32 int0_mask;
96 	u32 int1_mask;
97 
98 	/* maximum time (ns) for data lanes from HS to LP */
99 	u16 data_hs2lp;
100 	/* maximum time (ns) for data lanes from LP to HS */
101 	u16 data_lp2hs;
102 	/* maximum time (ns) for clk lanes from HS to LP */
103 	u16 clk_hs2lp;
104 	/* maximum time (ns) for clk lanes from LP to HS */
105 	u16 clk_lp2hs;
106 	/* maximum time (ns) for BTA operation - REQUIRED */
107 	u16 max_rd_time;
108 	/* enable receiving frame ack packets - for video mode */
109 	bool frame_ack_en;
110 	/* enable receiving tear effect ack packets - for cmd mode */
111 	bool te_ack_en;
112 };
113 
114 struct sprd_dsi {
115 	struct drm_device *drm;
116 	struct mipi_dsi_host host;
117 	struct mipi_dsi_device *slave;
118 	struct drm_encoder encoder;
119 	struct drm_bridge *panel_bridge;
120 	struct dsi_context ctx;
121 };
122 
123 int dphy_pll_config(struct dsi_context *ctx);
124 void dphy_timing_config(struct dsi_context *ctx);
125 
126 #endif /* __SPRD_DSI_H__ */
127