1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * (C) COPYRIGHT 2012-2013 ARM Limited. All rights reserved. 4 * 5 * Parts of this file were based on sources as follows: 6 * 7 * Copyright (c) 2006-2008 Intel Corporation 8 * Copyright (c) 2007 Dave Airlie <airlied@linux.ie> 9 * Copyright (C) 2011 Texas Instruments 10 */ 11 12 /** 13 * DOC: ARM PrimeCell PL111 CLCD Driver 14 * 15 * The PL111 is a simple LCD controller that can support TFT and STN 16 * displays. This driver exposes a standard KMS interface for them. 17 * 18 * This driver uses the same Device Tree binding as the fbdev CLCD 19 * driver. While the fbdev driver supports panels that may be 20 * connected to the CLCD internally to the CLCD driver, in DRM the 21 * panels get split out to drivers/gpu/drm/panels/. This means that, 22 * in converting from using fbdev to using DRM, you also need to write 23 * a panel driver (which may be as simple as an entry in 24 * panel-simple.c). 25 * 26 * The driver currently doesn't expose the cursor. The DRM API for 27 * cursors requires support for 64x64 ARGB8888 cursor images, while 28 * the hardware can only support 64x64 monochrome with masking 29 * cursors. While one could imagine trying to hack something together 30 * to look at the ARGB8888 and program reasonable in monochrome, we 31 * just don't expose the cursor at all instead, and leave cursor 32 * support to the X11 software cursor layer. 33 * 34 * TODO: 35 * 36 * - Fix race between setting plane base address and getting IRQ for 37 * vsync firing the pageflip completion. 38 * 39 * - Use the "max-memory-bandwidth" DT property to filter the 40 * supported formats. 41 * 42 * - Read back hardware state at boot to skip reprogramming the 43 * hardware when doing a no-op modeset. 44 * 45 * - Use the CLKSEL bit to support switching between the two external 46 * clock parents. 47 */ 48 49 #include <linux/amba/bus.h> 50 #include <linux/dma-buf.h> 51 #include <linux/module.h> 52 #include <linux/of.h> 53 #include <linux/of_graph.h> 54 #include <linux/of_reserved_mem.h> 55 #include <linux/shmem_fs.h> 56 #include <linux/slab.h> 57 #include <linux/version.h> 58 59 #include <drm/drm_atomic_helper.h> 60 #include <drm/drm_bridge.h> 61 #include <drm/drm_drv.h> 62 #include <drm/drm_fb_cma_helper.h> 63 #include <drm/drm_fb_helper.h> 64 #include <drm/drm_gem_cma_helper.h> 65 #include <drm/drm_gem_framebuffer_helper.h> 66 #include <drm/drm_of.h> 67 #include <drm/drm_panel.h> 68 #include <drm/drm_probe_helper.h> 69 #include <drm/drm_vblank.h> 70 71 #include "pl111_drm.h" 72 #include "pl111_versatile.h" 73 #include "pl111_nomadik.h" 74 75 #define DRIVER_DESC "DRM module for PL111" 76 77 static const struct drm_mode_config_funcs mode_config_funcs = { 78 .fb_create = drm_gem_fb_create, 79 .atomic_check = drm_atomic_helper_check, 80 .atomic_commit = drm_atomic_helper_commit, 81 }; 82 83 static int pl111_modeset_init(struct drm_device *dev) 84 { 85 struct drm_mode_config *mode_config; 86 struct pl111_drm_dev_private *priv = dev->dev_private; 87 struct device_node *np = dev->dev->of_node; 88 struct device_node *remote; 89 struct drm_panel *panel = NULL; 90 struct drm_bridge *bridge = NULL; 91 bool defer = false; 92 int ret; 93 int i; 94 95 ret = drmm_mode_config_init(dev); 96 if (ret) 97 return ret; 98 99 mode_config = &dev->mode_config; 100 mode_config->funcs = &mode_config_funcs; 101 mode_config->min_width = 1; 102 mode_config->max_width = 1024; 103 mode_config->min_height = 1; 104 mode_config->max_height = 768; 105 106 i = 0; 107 for_each_endpoint_of_node(np, remote) { 108 struct drm_panel *tmp_panel; 109 struct drm_bridge *tmp_bridge; 110 111 dev_dbg(dev->dev, "checking endpoint %d\n", i); 112 113 ret = drm_of_find_panel_or_bridge(dev->dev->of_node, 114 0, i, 115 &tmp_panel, 116 &tmp_bridge); 117 if (ret) { 118 if (ret == -EPROBE_DEFER) { 119 /* 120 * Something deferred, but that is often just 121 * another way of saying -ENODEV, but let's 122 * cast a vote for later deferral. 123 */ 124 defer = true; 125 } else if (ret != -ENODEV) { 126 /* Continue, maybe something else is working */ 127 dev_err(dev->dev, 128 "endpoint %d returns %d\n", i, ret); 129 } 130 } 131 132 if (tmp_panel) { 133 dev_info(dev->dev, 134 "found panel on endpoint %d\n", i); 135 panel = tmp_panel; 136 } 137 if (tmp_bridge) { 138 dev_info(dev->dev, 139 "found bridge on endpoint %d\n", i); 140 bridge = tmp_bridge; 141 } 142 143 i++; 144 } 145 146 /* 147 * If we can't find neither panel nor bridge on any of the 148 * endpoints, and any of them retured -EPROBE_DEFER, then 149 * let's defer this driver too. 150 */ 151 if ((!panel && !bridge) && defer) 152 return -EPROBE_DEFER; 153 154 if (panel) { 155 bridge = drm_panel_bridge_add_typed(panel, 156 DRM_MODE_CONNECTOR_Unknown); 157 if (IS_ERR(bridge)) { 158 ret = PTR_ERR(bridge); 159 goto finish; 160 } 161 } else if (bridge) { 162 dev_info(dev->dev, "Using non-panel bridge\n"); 163 } else { 164 dev_err(dev->dev, "No bridge, exiting\n"); 165 return -ENODEV; 166 } 167 168 priv->bridge = bridge; 169 if (panel) { 170 priv->panel = panel; 171 priv->connector = drm_panel_bridge_connector(bridge); 172 } 173 174 ret = pl111_display_init(dev); 175 if (ret != 0) { 176 dev_err(dev->dev, "Failed to init display\n"); 177 goto out_bridge; 178 } 179 180 ret = drm_simple_display_pipe_attach_bridge(&priv->pipe, 181 bridge); 182 if (ret) 183 return ret; 184 185 if (!priv->variant->broken_vblank) { 186 ret = drm_vblank_init(dev, 1); 187 if (ret != 0) { 188 dev_err(dev->dev, "Failed to init vblank\n"); 189 goto out_bridge; 190 } 191 } 192 193 drm_mode_config_reset(dev); 194 195 drm_kms_helper_poll_init(dev); 196 197 goto finish; 198 199 out_bridge: 200 if (panel) 201 drm_panel_bridge_remove(bridge); 202 finish: 203 return ret; 204 } 205 206 static struct drm_gem_object * 207 pl111_gem_import_sg_table(struct drm_device *dev, 208 struct dma_buf_attachment *attach, 209 struct sg_table *sgt) 210 { 211 struct pl111_drm_dev_private *priv = dev->dev_private; 212 213 /* 214 * When using device-specific reserved memory we can't import 215 * DMA buffers: those are passed by reference in any global 216 * memory and we can only handle a specific range of memory. 217 */ 218 if (priv->use_device_memory) 219 return ERR_PTR(-EINVAL); 220 221 return drm_gem_cma_prime_import_sg_table(dev, attach, sgt); 222 } 223 224 DEFINE_DRM_GEM_CMA_FOPS(drm_fops); 225 226 static struct drm_driver pl111_drm_driver = { 227 .driver_features = 228 DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC, 229 .ioctls = NULL, 230 .fops = &drm_fops, 231 .name = "pl111", 232 .desc = DRIVER_DESC, 233 .date = "20170317", 234 .major = 1, 235 .minor = 0, 236 .patchlevel = 0, 237 .dumb_create = drm_gem_cma_dumb_create, 238 .gem_free_object_unlocked = drm_gem_cma_free_object, 239 .gem_vm_ops = &drm_gem_cma_vm_ops, 240 .prime_handle_to_fd = drm_gem_prime_handle_to_fd, 241 .prime_fd_to_handle = drm_gem_prime_fd_to_handle, 242 .gem_prime_import_sg_table = pl111_gem_import_sg_table, 243 .gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table, 244 .gem_prime_mmap = drm_gem_cma_prime_mmap, 245 .gem_prime_vmap = drm_gem_cma_prime_vmap, 246 247 #if defined(CONFIG_DEBUG_FS) 248 .debugfs_init = pl111_debugfs_init, 249 #endif 250 }; 251 252 static int pl111_amba_probe(struct amba_device *amba_dev, 253 const struct amba_id *id) 254 { 255 struct device *dev = &amba_dev->dev; 256 struct pl111_drm_dev_private *priv; 257 const struct pl111_variant_data *variant = id->data; 258 struct drm_device *drm; 259 int ret; 260 261 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); 262 if (!priv) 263 return -ENOMEM; 264 265 drm = drm_dev_alloc(&pl111_drm_driver, dev); 266 if (IS_ERR(drm)) 267 return PTR_ERR(drm); 268 amba_set_drvdata(amba_dev, drm); 269 priv->drm = drm; 270 drm->dev_private = priv; 271 priv->variant = variant; 272 273 ret = of_reserved_mem_device_init(dev); 274 if (!ret) { 275 dev_info(dev, "using device-specific reserved memory\n"); 276 priv->use_device_memory = true; 277 } 278 279 if (of_property_read_u32(dev->of_node, "max-memory-bandwidth", 280 &priv->memory_bw)) { 281 dev_info(dev, "no max memory bandwidth specified, assume unlimited\n"); 282 priv->memory_bw = 0; 283 } 284 285 /* The two main variants swap this register */ 286 if (variant->is_pl110 || variant->is_lcdc) { 287 priv->ienb = CLCD_PL110_IENB; 288 priv->ctrl = CLCD_PL110_CNTL; 289 } else { 290 priv->ienb = CLCD_PL111_IENB; 291 priv->ctrl = CLCD_PL111_CNTL; 292 } 293 294 priv->regs = devm_ioremap_resource(dev, &amba_dev->res); 295 if (IS_ERR(priv->regs)) { 296 dev_err(dev, "%s failed mmio\n", __func__); 297 ret = PTR_ERR(priv->regs); 298 goto dev_put; 299 } 300 301 /* This may override some variant settings */ 302 ret = pl111_versatile_init(dev, priv); 303 if (ret) 304 goto dev_put; 305 306 pl111_nomadik_init(dev); 307 308 /* turn off interrupts before requesting the irq */ 309 writel(0, priv->regs + priv->ienb); 310 311 ret = devm_request_irq(dev, amba_dev->irq[0], pl111_irq, 0, 312 variant->name, priv); 313 if (ret != 0) { 314 dev_err(dev, "%s failed irq %d\n", __func__, ret); 315 return ret; 316 } 317 318 ret = pl111_modeset_init(drm); 319 if (ret != 0) 320 goto dev_put; 321 322 ret = drm_dev_register(drm, 0); 323 if (ret < 0) 324 goto dev_put; 325 326 drm_fbdev_generic_setup(drm, priv->variant->fb_bpp); 327 328 return 0; 329 330 dev_put: 331 drm_dev_put(drm); 332 of_reserved_mem_device_release(dev); 333 334 return ret; 335 } 336 337 static int pl111_amba_remove(struct amba_device *amba_dev) 338 { 339 struct device *dev = &amba_dev->dev; 340 struct drm_device *drm = amba_get_drvdata(amba_dev); 341 struct pl111_drm_dev_private *priv = drm->dev_private; 342 343 drm_dev_unregister(drm); 344 if (priv->panel) 345 drm_panel_bridge_remove(priv->bridge); 346 drm_dev_put(drm); 347 of_reserved_mem_device_release(dev); 348 349 return 0; 350 } 351 352 /* 353 * This early variant lacks the 565 and 444 pixel formats. 354 */ 355 static const u32 pl110_pixel_formats[] = { 356 DRM_FORMAT_ABGR8888, 357 DRM_FORMAT_XBGR8888, 358 DRM_FORMAT_ARGB8888, 359 DRM_FORMAT_XRGB8888, 360 DRM_FORMAT_ABGR1555, 361 DRM_FORMAT_XBGR1555, 362 DRM_FORMAT_ARGB1555, 363 DRM_FORMAT_XRGB1555, 364 }; 365 366 static const struct pl111_variant_data pl110_variant = { 367 .name = "PL110", 368 .is_pl110 = true, 369 .formats = pl110_pixel_formats, 370 .nformats = ARRAY_SIZE(pl110_pixel_formats), 371 .fb_bpp = 16, 372 }; 373 374 /* RealView, Versatile Express etc use this modern variant */ 375 static const u32 pl111_pixel_formats[] = { 376 DRM_FORMAT_ABGR8888, 377 DRM_FORMAT_XBGR8888, 378 DRM_FORMAT_ARGB8888, 379 DRM_FORMAT_XRGB8888, 380 DRM_FORMAT_BGR565, 381 DRM_FORMAT_RGB565, 382 DRM_FORMAT_ABGR1555, 383 DRM_FORMAT_XBGR1555, 384 DRM_FORMAT_ARGB1555, 385 DRM_FORMAT_XRGB1555, 386 DRM_FORMAT_ABGR4444, 387 DRM_FORMAT_XBGR4444, 388 DRM_FORMAT_ARGB4444, 389 DRM_FORMAT_XRGB4444, 390 }; 391 392 static const struct pl111_variant_data pl111_variant = { 393 .name = "PL111", 394 .formats = pl111_pixel_formats, 395 .nformats = ARRAY_SIZE(pl111_pixel_formats), 396 .fb_bpp = 32, 397 }; 398 399 static const u32 pl110_nomadik_pixel_formats[] = { 400 DRM_FORMAT_RGB888, 401 DRM_FORMAT_BGR888, 402 DRM_FORMAT_ABGR8888, 403 DRM_FORMAT_XBGR8888, 404 DRM_FORMAT_ARGB8888, 405 DRM_FORMAT_XRGB8888, 406 DRM_FORMAT_BGR565, 407 DRM_FORMAT_RGB565, 408 DRM_FORMAT_ABGR1555, 409 DRM_FORMAT_XBGR1555, 410 DRM_FORMAT_ARGB1555, 411 DRM_FORMAT_XRGB1555, 412 DRM_FORMAT_ABGR4444, 413 DRM_FORMAT_XBGR4444, 414 DRM_FORMAT_ARGB4444, 415 DRM_FORMAT_XRGB4444, 416 }; 417 418 static const struct pl111_variant_data pl110_nomadik_variant = { 419 .name = "LCDC (PL110 Nomadik)", 420 .formats = pl110_nomadik_pixel_formats, 421 .nformats = ARRAY_SIZE(pl110_nomadik_pixel_formats), 422 .is_lcdc = true, 423 .st_bitmux_control = true, 424 .broken_vblank = true, 425 .fb_bpp = 16, 426 }; 427 428 static const struct amba_id pl111_id_table[] = { 429 { 430 .id = 0x00041110, 431 .mask = 0x000fffff, 432 .data = (void *)&pl110_variant, 433 }, 434 { 435 .id = 0x00180110, 436 .mask = 0x00fffffe, 437 .data = (void *)&pl110_nomadik_variant, 438 }, 439 { 440 .id = 0x00041111, 441 .mask = 0x000fffff, 442 .data = (void *)&pl111_variant, 443 }, 444 {0, 0}, 445 }; 446 MODULE_DEVICE_TABLE(amba, pl111_id_table); 447 448 static struct amba_driver pl111_amba_driver __maybe_unused = { 449 .drv = { 450 .name = "drm-clcd-pl111", 451 }, 452 .probe = pl111_amba_probe, 453 .remove = pl111_amba_remove, 454 .id_table = pl111_id_table, 455 }; 456 457 #ifdef CONFIG_ARM_AMBA 458 module_amba_driver(pl111_amba_driver); 459 #endif 460 461 MODULE_DESCRIPTION(DRIVER_DESC); 462 MODULE_AUTHOR("ARM Ltd."); 463 MODULE_LICENSE("GPL"); 464