1 // SPDX-License-Identifier: GPL-2.0
2 /* Copyright 2019 Collabora ltd. */
3 #include <linux/devfreq.h>
4 #include <linux/platform_device.h>
5 #include <linux/pm_opp.h>
6 #include <linux/clk.h>
7 #include <linux/regulator/consumer.h>
8 
9 #include "panfrost_device.h"
10 #include "panfrost_devfreq.h"
11 #include "panfrost_features.h"
12 #include "panfrost_issues.h"
13 #include "panfrost_gpu.h"
14 #include "panfrost_regs.h"
15 
16 static void panfrost_devfreq_update_utilization(struct panfrost_device *pfdev, int slot);
17 
18 static int panfrost_devfreq_target(struct device *dev, unsigned long *freq,
19 				   u32 flags)
20 {
21 	struct panfrost_device *pfdev = platform_get_drvdata(to_platform_device(dev));
22 	struct dev_pm_opp *opp;
23 	unsigned long old_clk_rate = pfdev->devfreq.cur_freq;
24 	unsigned long target_volt, target_rate;
25 	int err;
26 
27 	opp = devfreq_recommended_opp(dev, freq, flags);
28 	if (IS_ERR(opp))
29 		return PTR_ERR(opp);
30 
31 	target_rate = dev_pm_opp_get_freq(opp);
32 	target_volt = dev_pm_opp_get_voltage(opp);
33 	dev_pm_opp_put(opp);
34 
35 	if (old_clk_rate == target_rate)
36 		return 0;
37 
38 	/*
39 	 * If frequency scaling from low to high, adjust voltage first.
40 	 * If frequency scaling from high to low, adjust frequency first.
41 	 */
42 	if (old_clk_rate < target_rate) {
43 		err = regulator_set_voltage(pfdev->regulator, target_volt,
44 					    target_volt);
45 		if (err) {
46 			dev_err(dev, "Cannot set voltage %lu uV\n",
47 				target_volt);
48 			return err;
49 		}
50 	}
51 
52 	err = clk_set_rate(pfdev->clock, target_rate);
53 	if (err) {
54 		dev_err(dev, "Cannot set frequency %lu (%d)\n", target_rate,
55 			err);
56 		regulator_set_voltage(pfdev->regulator, pfdev->devfreq.cur_volt,
57 				      pfdev->devfreq.cur_volt);
58 		return err;
59 	}
60 
61 	if (old_clk_rate > target_rate) {
62 		err = regulator_set_voltage(pfdev->regulator, target_volt,
63 					    target_volt);
64 		if (err)
65 			dev_err(dev, "Cannot set voltage %lu uV\n", target_volt);
66 	}
67 
68 	pfdev->devfreq.cur_freq = target_rate;
69 	pfdev->devfreq.cur_volt = target_volt;
70 
71 	return 0;
72 }
73 
74 static void panfrost_devfreq_reset(struct panfrost_device *pfdev)
75 {
76 	ktime_t now = ktime_get();
77 	int i;
78 
79 	for (i = 0; i < NUM_JOB_SLOTS; i++) {
80 		pfdev->devfreq.slot[i].busy_time = 0;
81 		pfdev->devfreq.slot[i].idle_time = 0;
82 		pfdev->devfreq.slot[i].time_last_update = now;
83 	}
84 }
85 
86 static int panfrost_devfreq_get_dev_status(struct device *dev,
87 					   struct devfreq_dev_status *status)
88 {
89 	struct panfrost_device *pfdev = platform_get_drvdata(to_platform_device(dev));
90 	int i;
91 
92 	for (i = 0; i < NUM_JOB_SLOTS; i++) {
93 		panfrost_devfreq_update_utilization(pfdev, i);
94 	}
95 
96 	status->current_frequency = clk_get_rate(pfdev->clock);
97 	status->total_time = ktime_to_ns(ktime_add(pfdev->devfreq.slot[0].busy_time,
98 						   pfdev->devfreq.slot[0].idle_time));
99 
100 	status->busy_time = 0;
101 	for (i = 0; i < NUM_JOB_SLOTS; i++) {
102 		status->busy_time += ktime_to_ns(pfdev->devfreq.slot[i].busy_time);
103 	}
104 
105 	/* We're scheduling only to one core atm, so don't divide for now */
106 	/* status->busy_time /= NUM_JOB_SLOTS; */
107 
108 	panfrost_devfreq_reset(pfdev);
109 
110 	dev_dbg(pfdev->dev, "busy %lu total %lu %lu %% freq %lu MHz\n", status->busy_time,
111 		status->total_time,
112 		status->busy_time / (status->total_time / 100),
113 		status->current_frequency / 1000 / 1000);
114 
115 	return 0;
116 }
117 
118 static int panfrost_devfreq_get_cur_freq(struct device *dev, unsigned long *freq)
119 {
120 	struct panfrost_device *pfdev = platform_get_drvdata(to_platform_device(dev));
121 
122 	*freq = pfdev->devfreq.cur_freq;
123 
124 	return 0;
125 }
126 
127 static struct devfreq_dev_profile panfrost_devfreq_profile = {
128 	.polling_ms = 50, /* ~3 frames */
129 	.target = panfrost_devfreq_target,
130 	.get_dev_status = panfrost_devfreq_get_dev_status,
131 	.get_cur_freq = panfrost_devfreq_get_cur_freq,
132 };
133 
134 int panfrost_devfreq_init(struct panfrost_device *pfdev)
135 {
136 	int ret;
137 	struct dev_pm_opp *opp;
138 
139 	ret = dev_pm_opp_of_add_table(&pfdev->pdev->dev);
140 	if (ret == -ENODEV) /* Optional, continue without devfreq */
141 		return 0;
142 	else if (ret)
143 		return ret;
144 
145 	panfrost_devfreq_reset(pfdev);
146 
147 	pfdev->devfreq.cur_freq = clk_get_rate(pfdev->clock);
148 
149 	opp = devfreq_recommended_opp(&pfdev->pdev->dev, &pfdev->devfreq.cur_freq, 0);
150 	if (IS_ERR(opp))
151 		return PTR_ERR(opp);
152 
153 	panfrost_devfreq_profile.initial_freq = pfdev->devfreq.cur_freq;
154 	dev_pm_opp_put(opp);
155 
156 	pfdev->devfreq.devfreq = devm_devfreq_add_device(&pfdev->pdev->dev,
157 			&panfrost_devfreq_profile, DEVFREQ_GOV_SIMPLE_ONDEMAND,
158 			NULL);
159 	if (IS_ERR(pfdev->devfreq.devfreq)) {
160 		DRM_DEV_ERROR(&pfdev->pdev->dev, "Couldn't initialize GPU devfreq\n");
161 		ret = PTR_ERR(pfdev->devfreq.devfreq);
162 		pfdev->devfreq.devfreq = NULL;
163 		dev_pm_opp_of_remove_table(&pfdev->pdev->dev);
164 		return ret;
165 	}
166 
167 	return 0;
168 }
169 
170 void panfrost_devfreq_fini(struct panfrost_device *pfdev)
171 {
172 	dev_pm_opp_of_remove_table(&pfdev->pdev->dev);
173 }
174 
175 void panfrost_devfreq_resume(struct panfrost_device *pfdev)
176 {
177 	int i;
178 
179 	if (!pfdev->devfreq.devfreq)
180 		return;
181 
182 	panfrost_devfreq_reset(pfdev);
183 	for (i = 0; i < NUM_JOB_SLOTS; i++)
184 		pfdev->devfreq.slot[i].busy = false;
185 
186 	devfreq_resume_device(pfdev->devfreq.devfreq);
187 }
188 
189 void panfrost_devfreq_suspend(struct panfrost_device *pfdev)
190 {
191 	if (!pfdev->devfreq.devfreq)
192 		return;
193 
194 	devfreq_suspend_device(pfdev->devfreq.devfreq);
195 }
196 
197 static void panfrost_devfreq_update_utilization(struct panfrost_device *pfdev, int slot)
198 {
199 	struct panfrost_devfreq_slot *devfreq_slot = &pfdev->devfreq.slot[slot];
200 	ktime_t now;
201 	ktime_t last;
202 
203 	if (!pfdev->devfreq.devfreq)
204 		return;
205 
206 	now = ktime_get();
207 	last = pfdev->devfreq.slot[slot].time_last_update;
208 
209 	/* If we last recorded a transition to busy, we have been idle since */
210 	if (devfreq_slot->busy)
211 		pfdev->devfreq.slot[slot].busy_time += ktime_sub(now, last);
212 	else
213 		pfdev->devfreq.slot[slot].idle_time += ktime_sub(now, last);
214 
215 	pfdev->devfreq.slot[slot].time_last_update = now;
216 }
217 
218 /* The job scheduler is expected to call this at every transition busy <-> idle */
219 void panfrost_devfreq_record_transition(struct panfrost_device *pfdev, int slot)
220 {
221 	struct panfrost_devfreq_slot *devfreq_slot = &pfdev->devfreq.slot[slot];
222 
223 	panfrost_devfreq_update_utilization(pfdev, slot);
224 	devfreq_slot->busy = !devfreq_slot->busy;
225 }
226