1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Sony ACX565AKM LCD Panel driver
4  *
5  * Copyright (C) 2019 Texas Instruments Incorporated
6  *
7  * Based on the omapdrm-specific panel-sony-acx565akm driver
8  *
9  * Copyright (C) 2010 Nokia Corporation
10  * Author: Imre Deak <imre.deak@nokia.com>
11  */
12 
13 /*
14  * TODO (to be addressed with hardware access to test the changes):
15  *
16  * - Update backlight support to use backlight_update_status() etc.
17  * - Use prepare/unprepare for the basic power on/off of the backligt
18  */
19 
20 #include <linux/backlight.h>
21 #include <linux/delay.h>
22 #include <linux/gpio/consumer.h>
23 #include <linux/jiffies.h>
24 #include <linux/module.h>
25 #include <linux/mutex.h>
26 #include <linux/sched.h>
27 #include <linux/spi/spi.h>
28 #include <video/mipi_display.h>
29 
30 #include <drm/drm_connector.h>
31 #include <drm/drm_modes.h>
32 #include <drm/drm_panel.h>
33 
34 #define CTRL_DISP_BRIGHTNESS_CTRL_ON		BIT(5)
35 #define CTRL_DISP_AMBIENT_LIGHT_CTRL_ON		BIT(4)
36 #define CTRL_DISP_BACKLIGHT_ON			BIT(2)
37 #define CTRL_DISP_AUTO_BRIGHTNESS_ON		BIT(1)
38 
39 #define MIPID_CMD_WRITE_CABC		0x55
40 #define MIPID_CMD_READ_CABC		0x56
41 
42 #define MIPID_VER_LPH8923		3
43 #define MIPID_VER_LS041Y3		4
44 #define MIPID_VER_L4F00311		8
45 #define MIPID_VER_ACX565AKM		9
46 
47 struct acx565akm_panel {
48 	struct drm_panel panel;
49 
50 	struct spi_device *spi;
51 	struct gpio_desc *reset_gpio;
52 	struct backlight_device *backlight;
53 
54 	struct mutex mutex;
55 
56 	const char *name;
57 	u8 display_id[3];
58 	int model;
59 	int revision;
60 	bool has_bc;
61 	bool has_cabc;
62 
63 	bool enabled;
64 	unsigned int cabc_mode;
65 	/*
66 	 * Next value of jiffies when we can issue the next sleep in/out
67 	 * command.
68 	 */
69 	unsigned long hw_guard_end;
70 	unsigned long hw_guard_wait;		/* max guard time in jiffies */
71 };
72 
73 #define to_acx565akm_device(p) container_of(p, struct acx565akm_panel, panel)
74 
75 static void acx565akm_transfer(struct acx565akm_panel *lcd, int cmd,
76 			      const u8 *wbuf, int wlen, u8 *rbuf, int rlen)
77 {
78 	struct spi_message	m;
79 	struct spi_transfer	*x, xfer[5];
80 	int			ret;
81 
82 	spi_message_init(&m);
83 
84 	memset(xfer, 0, sizeof(xfer));
85 	x = &xfer[0];
86 
87 	cmd &=  0xff;
88 	x->tx_buf = &cmd;
89 	x->bits_per_word = 9;
90 	x->len = 2;
91 
92 	if (rlen > 1 && wlen == 0) {
93 		/*
94 		 * Between the command and the response data there is a
95 		 * dummy clock cycle. Add an extra bit after the command
96 		 * word to account for this.
97 		 */
98 		x->bits_per_word = 10;
99 		cmd <<= 1;
100 	}
101 	spi_message_add_tail(x, &m);
102 
103 	if (wlen) {
104 		x++;
105 		x->tx_buf = wbuf;
106 		x->len = wlen;
107 		x->bits_per_word = 9;
108 		spi_message_add_tail(x, &m);
109 	}
110 
111 	if (rlen) {
112 		x++;
113 		x->rx_buf	= rbuf;
114 		x->len		= rlen;
115 		spi_message_add_tail(x, &m);
116 	}
117 
118 	ret = spi_sync(lcd->spi, &m);
119 	if (ret < 0)
120 		dev_dbg(&lcd->spi->dev, "spi_sync %d\n", ret);
121 }
122 
123 static inline void acx565akm_cmd(struct acx565akm_panel *lcd, int cmd)
124 {
125 	acx565akm_transfer(lcd, cmd, NULL, 0, NULL, 0);
126 }
127 
128 static inline void acx565akm_write(struct acx565akm_panel *lcd,
129 			       int reg, const u8 *buf, int len)
130 {
131 	acx565akm_transfer(lcd, reg, buf, len, NULL, 0);
132 }
133 
134 static inline void acx565akm_read(struct acx565akm_panel *lcd,
135 			      int reg, u8 *buf, int len)
136 {
137 	acx565akm_transfer(lcd, reg, NULL, 0, buf, len);
138 }
139 
140 /* -----------------------------------------------------------------------------
141  * Auto Brightness Control Via sysfs
142  */
143 
144 static unsigned int acx565akm_get_cabc_mode(struct acx565akm_panel *lcd)
145 {
146 	return lcd->cabc_mode;
147 }
148 
149 static void acx565akm_set_cabc_mode(struct acx565akm_panel *lcd,
150 				    unsigned int mode)
151 {
152 	u16 cabc_ctrl;
153 
154 	lcd->cabc_mode = mode;
155 	if (!lcd->enabled)
156 		return;
157 	cabc_ctrl = 0;
158 	acx565akm_read(lcd, MIPID_CMD_READ_CABC, (u8 *)&cabc_ctrl, 1);
159 	cabc_ctrl &= ~3;
160 	cabc_ctrl |= (1 << 8) | (mode & 3);
161 	acx565akm_write(lcd, MIPID_CMD_WRITE_CABC, (u8 *)&cabc_ctrl, 2);
162 }
163 
164 static unsigned int acx565akm_get_hw_cabc_mode(struct acx565akm_panel *lcd)
165 {
166 	u8 cabc_ctrl;
167 
168 	acx565akm_read(lcd, MIPID_CMD_READ_CABC, &cabc_ctrl, 1);
169 	return cabc_ctrl & 3;
170 }
171 
172 static const char * const acx565akm_cabc_modes[] = {
173 	"off",		/* always used when CABC is not supported */
174 	"ui",
175 	"still-image",
176 	"moving-image",
177 };
178 
179 static ssize_t cabc_mode_show(struct device *dev,
180 			      struct device_attribute *attr,
181 			      char *buf)
182 {
183 	struct acx565akm_panel *lcd = dev_get_drvdata(dev);
184 	const char *mode_str;
185 	int mode;
186 
187 	if (!lcd->has_cabc)
188 		mode = 0;
189 	else
190 		mode = acx565akm_get_cabc_mode(lcd);
191 
192 	mode_str = "unknown";
193 	if (mode >= 0 && mode < ARRAY_SIZE(acx565akm_cabc_modes))
194 		mode_str = acx565akm_cabc_modes[mode];
195 
196 	return sprintf(buf, "%s\n", mode_str);
197 }
198 
199 static ssize_t cabc_mode_store(struct device *dev,
200 			       struct device_attribute *attr,
201 			       const char *buf, size_t count)
202 {
203 	struct acx565akm_panel *lcd = dev_get_drvdata(dev);
204 	unsigned int i;
205 
206 	for (i = 0; i < ARRAY_SIZE(acx565akm_cabc_modes); i++) {
207 		const char *mode_str = acx565akm_cabc_modes[i];
208 		int cmp_len = strlen(mode_str);
209 
210 		if (count > 0 && buf[count - 1] == '\n')
211 			count--;
212 		if (count != cmp_len)
213 			continue;
214 
215 		if (strncmp(buf, mode_str, cmp_len) == 0)
216 			break;
217 	}
218 
219 	if (i == ARRAY_SIZE(acx565akm_cabc_modes))
220 		return -EINVAL;
221 
222 	if (!lcd->has_cabc && i != 0)
223 		return -EINVAL;
224 
225 	mutex_lock(&lcd->mutex);
226 	acx565akm_set_cabc_mode(lcd, i);
227 	mutex_unlock(&lcd->mutex);
228 
229 	return count;
230 }
231 
232 static ssize_t cabc_available_modes_show(struct device *dev,
233 					 struct device_attribute *attr,
234 					 char *buf)
235 {
236 	struct acx565akm_panel *lcd = dev_get_drvdata(dev);
237 	unsigned int i;
238 	size_t len = 0;
239 
240 	if (!lcd->has_cabc)
241 		return sprintf(buf, "%s\n", acx565akm_cabc_modes[0]);
242 
243 	for (i = 0; i < ARRAY_SIZE(acx565akm_cabc_modes); i++)
244 		len += sprintf(&buf[len], "%s%s", i ? " " : "",
245 			       acx565akm_cabc_modes[i]);
246 
247 	buf[len++] = '\n';
248 
249 	return len;
250 }
251 
252 static DEVICE_ATTR_RW(cabc_mode);
253 static DEVICE_ATTR_RO(cabc_available_modes);
254 
255 static struct attribute *acx565akm_cabc_attrs[] = {
256 	&dev_attr_cabc_mode.attr,
257 	&dev_attr_cabc_available_modes.attr,
258 	NULL,
259 };
260 
261 static const struct attribute_group acx565akm_cabc_attr_group = {
262 	.attrs = acx565akm_cabc_attrs,
263 };
264 
265 /* -----------------------------------------------------------------------------
266  * Backlight Device
267  */
268 
269 static int acx565akm_get_actual_brightness(struct acx565akm_panel *lcd)
270 {
271 	u8 bv;
272 
273 	acx565akm_read(lcd, MIPI_DCS_GET_DISPLAY_BRIGHTNESS, &bv, 1);
274 
275 	return bv;
276 }
277 
278 static void acx565akm_set_brightness(struct acx565akm_panel *lcd, int level)
279 {
280 	u16 ctrl;
281 	int bv;
282 
283 	bv = level | (1 << 8);
284 	acx565akm_write(lcd, MIPI_DCS_SET_DISPLAY_BRIGHTNESS, (u8 *)&bv, 2);
285 
286 	acx565akm_read(lcd, MIPI_DCS_GET_CONTROL_DISPLAY, (u8 *)&ctrl, 1);
287 	if (level)
288 		ctrl |= CTRL_DISP_BRIGHTNESS_CTRL_ON |
289 			CTRL_DISP_BACKLIGHT_ON;
290 	else
291 		ctrl &= ~(CTRL_DISP_BRIGHTNESS_CTRL_ON |
292 			  CTRL_DISP_BACKLIGHT_ON);
293 
294 	ctrl |= 1 << 8;
295 	acx565akm_write(lcd, MIPI_DCS_WRITE_CONTROL_DISPLAY, (u8 *)&ctrl, 2);
296 }
297 
298 static int acx565akm_bl_update_status_locked(struct backlight_device *dev)
299 {
300 	struct acx565akm_panel *lcd = dev_get_drvdata(&dev->dev);
301 	int level;
302 
303 	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
304 	    dev->props.power == FB_BLANK_UNBLANK)
305 		level = dev->props.brightness;
306 	else
307 		level = 0;
308 
309 	acx565akm_set_brightness(lcd, level);
310 
311 	return 0;
312 }
313 
314 static int acx565akm_bl_update_status(struct backlight_device *dev)
315 {
316 	struct acx565akm_panel *lcd = dev_get_drvdata(&dev->dev);
317 	int ret;
318 
319 	mutex_lock(&lcd->mutex);
320 	ret = acx565akm_bl_update_status_locked(dev);
321 	mutex_unlock(&lcd->mutex);
322 
323 	return ret;
324 }
325 
326 static int acx565akm_bl_get_intensity(struct backlight_device *dev)
327 {
328 	struct acx565akm_panel *lcd = dev_get_drvdata(&dev->dev);
329 	unsigned int intensity;
330 
331 	mutex_lock(&lcd->mutex);
332 
333 	if (dev->props.fb_blank == FB_BLANK_UNBLANK &&
334 	    dev->props.power == FB_BLANK_UNBLANK)
335 		intensity = acx565akm_get_actual_brightness(lcd);
336 	else
337 		intensity = 0;
338 
339 	mutex_unlock(&lcd->mutex);
340 
341 	return intensity;
342 }
343 
344 static const struct backlight_ops acx565akm_bl_ops = {
345 	.get_brightness = acx565akm_bl_get_intensity,
346 	.update_status  = acx565akm_bl_update_status,
347 };
348 
349 static int acx565akm_backlight_init(struct acx565akm_panel *lcd)
350 {
351 	struct backlight_properties props = {
352 		.fb_blank = FB_BLANK_UNBLANK,
353 		.power = FB_BLANK_UNBLANK,
354 		.type = BACKLIGHT_RAW,
355 	};
356 	int ret;
357 
358 	lcd->backlight = backlight_device_register(lcd->name, &lcd->spi->dev,
359 						   lcd, &acx565akm_bl_ops,
360 						   &props);
361 	if (IS_ERR(lcd->backlight)) {
362 		ret = PTR_ERR(lcd->backlight);
363 		lcd->backlight = NULL;
364 		return ret;
365 	}
366 
367 	if (lcd->has_cabc) {
368 		ret = sysfs_create_group(&lcd->backlight->dev.kobj,
369 					 &acx565akm_cabc_attr_group);
370 		if (ret < 0) {
371 			dev_err(&lcd->spi->dev,
372 				"%s failed to create sysfs files\n", __func__);
373 			backlight_device_unregister(lcd->backlight);
374 			return ret;
375 		}
376 
377 		lcd->cabc_mode = acx565akm_get_hw_cabc_mode(lcd);
378 	}
379 
380 	lcd->backlight->props.max_brightness = 255;
381 	lcd->backlight->props.brightness = acx565akm_get_actual_brightness(lcd);
382 
383 	acx565akm_bl_update_status_locked(lcd->backlight);
384 
385 	return 0;
386 }
387 
388 static void acx565akm_backlight_cleanup(struct acx565akm_panel *lcd)
389 {
390 	if (lcd->has_cabc)
391 		sysfs_remove_group(&lcd->backlight->dev.kobj,
392 				   &acx565akm_cabc_attr_group);
393 
394 	backlight_device_unregister(lcd->backlight);
395 }
396 
397 /* -----------------------------------------------------------------------------
398  * DRM Bridge Operations
399  */
400 
401 static void acx565akm_set_sleep_mode(struct acx565akm_panel *lcd, int on)
402 {
403 	int cmd = on ? MIPI_DCS_ENTER_SLEEP_MODE : MIPI_DCS_EXIT_SLEEP_MODE;
404 	unsigned long wait;
405 
406 	/*
407 	 * We have to keep 120msec between sleep in/out commands.
408 	 * (8.2.15, 8.2.16).
409 	 */
410 	wait = lcd->hw_guard_end - jiffies;
411 	if ((long)wait > 0 && wait <= lcd->hw_guard_wait) {
412 		set_current_state(TASK_UNINTERRUPTIBLE);
413 		schedule_timeout(wait);
414 	}
415 
416 	acx565akm_cmd(lcd, cmd);
417 
418 	lcd->hw_guard_wait = msecs_to_jiffies(120);
419 	lcd->hw_guard_end = jiffies + lcd->hw_guard_wait;
420 }
421 
422 static void acx565akm_set_display_state(struct acx565akm_panel *lcd,
423 					int enabled)
424 {
425 	int cmd = enabled ? MIPI_DCS_SET_DISPLAY_ON : MIPI_DCS_SET_DISPLAY_OFF;
426 
427 	acx565akm_cmd(lcd, cmd);
428 }
429 
430 static int acx565akm_power_on(struct acx565akm_panel *lcd)
431 {
432 	/*FIXME tweak me */
433 	msleep(50);
434 
435 	gpiod_set_value(lcd->reset_gpio, 1);
436 
437 	if (lcd->enabled) {
438 		dev_dbg(&lcd->spi->dev, "panel already enabled\n");
439 		return 0;
440 	}
441 
442 	/*
443 	 * We have to meet all the following delay requirements:
444 	 * 1. tRW: reset pulse width 10usec (7.12.1)
445 	 * 2. tRT: reset cancel time 5msec (7.12.1)
446 	 * 3. Providing PCLK,HS,VS signals for 2 frames = ~50msec worst
447 	 *    case (7.6.2)
448 	 * 4. 120msec before the sleep out command (7.12.1)
449 	 */
450 	msleep(120);
451 
452 	acx565akm_set_sleep_mode(lcd, 0);
453 	lcd->enabled = true;
454 
455 	/* 5msec between sleep out and the next command. (8.2.16) */
456 	usleep_range(5000, 10000);
457 	acx565akm_set_display_state(lcd, 1);
458 	acx565akm_set_cabc_mode(lcd, lcd->cabc_mode);
459 
460 	return acx565akm_bl_update_status_locked(lcd->backlight);
461 }
462 
463 static void acx565akm_power_off(struct acx565akm_panel *lcd)
464 {
465 	if (!lcd->enabled)
466 		return;
467 
468 	acx565akm_set_display_state(lcd, 0);
469 	acx565akm_set_sleep_mode(lcd, 1);
470 	lcd->enabled = false;
471 	/*
472 	 * We have to provide PCLK,HS,VS signals for 2 frames (worst case
473 	 * ~50msec) after sending the sleep in command and asserting the
474 	 * reset signal. We probably could assert the reset w/o the delay
475 	 * but we still delay to avoid possible artifacts. (7.6.1)
476 	 */
477 	msleep(50);
478 
479 	gpiod_set_value(lcd->reset_gpio, 0);
480 
481 	/* FIXME need to tweak this delay */
482 	msleep(100);
483 }
484 
485 static int acx565akm_disable(struct drm_panel *panel)
486 {
487 	struct acx565akm_panel *lcd = to_acx565akm_device(panel);
488 
489 	mutex_lock(&lcd->mutex);
490 	acx565akm_power_off(lcd);
491 	mutex_unlock(&lcd->mutex);
492 
493 	return 0;
494 }
495 
496 static int acx565akm_enable(struct drm_panel *panel)
497 {
498 	struct acx565akm_panel *lcd = to_acx565akm_device(panel);
499 
500 	mutex_lock(&lcd->mutex);
501 	acx565akm_power_on(lcd);
502 	mutex_unlock(&lcd->mutex);
503 
504 	return 0;
505 }
506 
507 static const struct drm_display_mode acx565akm_mode = {
508 	.clock = 24000,
509 	.hdisplay = 800,
510 	.hsync_start = 800 + 28,
511 	.hsync_end = 800 + 28 + 4,
512 	.htotal = 800 + 28 + 4 + 24,
513 	.vdisplay = 480,
514 	.vsync_start = 480 + 3,
515 	.vsync_end = 480 + 3 + 3,
516 	.vtotal = 480 + 3 + 3 + 4,
517 	.type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED,
518 	.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
519 	.width_mm = 77,
520 	.height_mm = 46,
521 };
522 
523 static int acx565akm_get_modes(struct drm_panel *panel,
524 			       struct drm_connector *connector)
525 {
526 	struct drm_display_mode *mode;
527 
528 	mode = drm_mode_duplicate(connector->dev, &acx565akm_mode);
529 	if (!mode)
530 		return -ENOMEM;
531 
532 	drm_mode_set_name(mode);
533 	drm_mode_probed_add(connector, mode);
534 
535 	connector->display_info.width_mm = acx565akm_mode.width_mm;
536 	connector->display_info.height_mm = acx565akm_mode.height_mm;
537 	connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH
538 					  | DRM_BUS_FLAG_SYNC_SAMPLE_POSEDGE
539 					  | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE;
540 
541 	return 1;
542 }
543 
544 static const struct drm_panel_funcs acx565akm_funcs = {
545 	.disable = acx565akm_disable,
546 	.enable = acx565akm_enable,
547 	.get_modes = acx565akm_get_modes,
548 };
549 
550 /* -----------------------------------------------------------------------------
551  * Probe, Detect and Remove
552  */
553 
554 static int acx565akm_detect(struct acx565akm_panel *lcd)
555 {
556 	__be32 value;
557 	u32 status;
558 	int ret = 0;
559 
560 	/*
561 	 * After being taken out of reset the panel needs 5ms before the first
562 	 * command can be sent.
563 	 */
564 	gpiod_set_value(lcd->reset_gpio, 1);
565 	usleep_range(5000, 10000);
566 
567 	acx565akm_read(lcd, MIPI_DCS_GET_DISPLAY_STATUS, (u8 *)&value, 4);
568 	status = __be32_to_cpu(value);
569 	lcd->enabled = (status & (1 << 17)) && (status & (1 << 10));
570 
571 	dev_dbg(&lcd->spi->dev,
572 		"LCD panel %s by bootloader (status 0x%04x)\n",
573 		lcd->enabled ? "enabled" : "disabled ", status);
574 
575 	acx565akm_read(lcd, MIPI_DCS_GET_DISPLAY_ID, lcd->display_id, 3);
576 	dev_dbg(&lcd->spi->dev, "MIPI display ID: %02x%02x%02x\n",
577 		lcd->display_id[0], lcd->display_id[1], lcd->display_id[2]);
578 
579 	switch (lcd->display_id[0]) {
580 	case 0x10:
581 		lcd->model = MIPID_VER_ACX565AKM;
582 		lcd->name = "acx565akm";
583 		lcd->has_bc = 1;
584 		lcd->has_cabc = 1;
585 		break;
586 	case 0x29:
587 		lcd->model = MIPID_VER_L4F00311;
588 		lcd->name = "l4f00311";
589 		break;
590 	case 0x45:
591 		lcd->model = MIPID_VER_LPH8923;
592 		lcd->name = "lph8923";
593 		break;
594 	case 0x83:
595 		lcd->model = MIPID_VER_LS041Y3;
596 		lcd->name = "ls041y3";
597 		break;
598 	default:
599 		lcd->name = "unknown";
600 		dev_err(&lcd->spi->dev, "unknown display ID\n");
601 		ret = -ENODEV;
602 		goto done;
603 	}
604 
605 	lcd->revision = lcd->display_id[1];
606 
607 	dev_info(&lcd->spi->dev, "%s rev %02x panel detected\n",
608 		 lcd->name, lcd->revision);
609 
610 done:
611 	if (!lcd->enabled)
612 		gpiod_set_value(lcd->reset_gpio, 0);
613 
614 	return ret;
615 }
616 
617 static int acx565akm_probe(struct spi_device *spi)
618 {
619 	struct acx565akm_panel *lcd;
620 	int ret;
621 
622 	lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
623 	if (!lcd)
624 		return -ENOMEM;
625 
626 	spi_set_drvdata(spi, lcd);
627 	spi->mode = SPI_MODE_3;
628 
629 	lcd->spi = spi;
630 	mutex_init(&lcd->mutex);
631 
632 	lcd->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
633 	if (IS_ERR(lcd->reset_gpio)) {
634 		dev_err(&spi->dev, "failed to get reset GPIO\n");
635 		return PTR_ERR(lcd->reset_gpio);
636 	}
637 
638 	ret = acx565akm_detect(lcd);
639 	if (ret < 0) {
640 		dev_err(&spi->dev, "panel detection failed\n");
641 		return ret;
642 	}
643 
644 	if (lcd->has_bc) {
645 		ret = acx565akm_backlight_init(lcd);
646 		if (ret < 0)
647 			return ret;
648 	}
649 
650 	drm_panel_init(&lcd->panel, &lcd->spi->dev, &acx565akm_funcs,
651 		       DRM_MODE_CONNECTOR_DPI);
652 
653 	drm_panel_add(&lcd->panel);
654 
655 	return 0;
656 }
657 
658 static int acx565akm_remove(struct spi_device *spi)
659 {
660 	struct acx565akm_panel *lcd = spi_get_drvdata(spi);
661 
662 	drm_panel_remove(&lcd->panel);
663 
664 	if (lcd->has_bc)
665 		acx565akm_backlight_cleanup(lcd);
666 
667 	drm_panel_disable(&lcd->panel);
668 	drm_panel_unprepare(&lcd->panel);
669 
670 	return 0;
671 }
672 
673 static const struct of_device_id acx565akm_of_match[] = {
674 	{ .compatible = "sony,acx565akm", },
675 	{ /* sentinel */ },
676 };
677 
678 MODULE_DEVICE_TABLE(of, acx565akm_of_match);
679 
680 static const struct spi_device_id acx565akm_ids[] = {
681 	{ "acx565akm", 0 },
682 	{ /* sentinel */ }
683 };
684 
685 MODULE_DEVICE_TABLE(spi, acx565akm_ids);
686 
687 static struct spi_driver acx565akm_driver = {
688 	.probe		= acx565akm_probe,
689 	.remove		= acx565akm_remove,
690 	.id_table	= acx565akm_ids,
691 	.driver		= {
692 		.name	= "panel-sony-acx565akm",
693 		.of_match_table = acx565akm_of_match,
694 	},
695 };
696 
697 module_spi_driver(acx565akm_driver);
698 
699 MODULE_AUTHOR("Nokia Corporation");
700 MODULE_DESCRIPTION("Sony ACX565AKM LCD Panel Driver");
701 MODULE_LICENSE("GPL");
702