1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * MIPI-DSI Samsung s6d16d0 panel driver. This is a 864x480 4 * AMOLED panel with a command-only DSI interface. 5 */ 6 7 #include <drm/drm_modes.h> 8 #include <drm/drm_mipi_dsi.h> 9 #include <drm/drm_panel.h> 10 11 #include <linux/gpio/consumer.h> 12 #include <linux/regulator/consumer.h> 13 #include <linux/delay.h> 14 #include <linux/of_device.h> 15 #include <linux/module.h> 16 17 struct s6d16d0 { 18 struct device *dev; 19 struct drm_panel panel; 20 struct regulator *supply; 21 struct gpio_desc *reset_gpio; 22 }; 23 24 /* 25 * The timings are not very helpful as the display is used in 26 * command mode. 27 */ 28 static const struct drm_display_mode samsung_s6d16d0_mode = { 29 /* HS clock, (htotal*vtotal*vrefresh)/1000 */ 30 .clock = 420160, 31 .hdisplay = 864, 32 .hsync_start = 864 + 154, 33 .hsync_end = 864 + 154 + 16, 34 .htotal = 864 + 154 + 16 + 32, 35 .vdisplay = 480, 36 .vsync_start = 480 + 1, 37 .vsync_end = 480 + 1 + 1, 38 .vtotal = 480 + 1 + 1 + 1, 39 .width_mm = 84, 40 .height_mm = 48, 41 }; 42 43 static inline struct s6d16d0 *panel_to_s6d16d0(struct drm_panel *panel) 44 { 45 return container_of(panel, struct s6d16d0, panel); 46 } 47 48 static int s6d16d0_unprepare(struct drm_panel *panel) 49 { 50 struct s6d16d0 *s6 = panel_to_s6d16d0(panel); 51 struct mipi_dsi_device *dsi = to_mipi_dsi_device(s6->dev); 52 int ret; 53 54 /* Enter sleep mode */ 55 ret = mipi_dsi_dcs_enter_sleep_mode(dsi); 56 if (ret) { 57 dev_err(s6->dev, "failed to enter sleep mode (%d)\n", ret); 58 return ret; 59 } 60 61 /* Assert RESET */ 62 gpiod_set_value_cansleep(s6->reset_gpio, 1); 63 regulator_disable(s6->supply); 64 65 return 0; 66 } 67 68 static int s6d16d0_prepare(struct drm_panel *panel) 69 { 70 struct s6d16d0 *s6 = panel_to_s6d16d0(panel); 71 struct mipi_dsi_device *dsi = to_mipi_dsi_device(s6->dev); 72 int ret; 73 74 ret = regulator_enable(s6->supply); 75 if (ret) { 76 dev_err(s6->dev, "failed to enable supply (%d)\n", ret); 77 return ret; 78 } 79 80 /* Assert RESET */ 81 gpiod_set_value_cansleep(s6->reset_gpio, 1); 82 udelay(10); 83 /* De-assert RESET */ 84 gpiod_set_value_cansleep(s6->reset_gpio, 0); 85 msleep(120); 86 87 /* Enabe tearing mode: send TE (tearing effect) at VBLANK */ 88 ret = mipi_dsi_dcs_set_tear_on(dsi, 89 MIPI_DSI_DCS_TEAR_MODE_VBLANK); 90 if (ret) { 91 dev_err(s6->dev, "failed to enable vblank TE (%d)\n", ret); 92 return ret; 93 } 94 /* Exit sleep mode and power on */ 95 ret = mipi_dsi_dcs_exit_sleep_mode(dsi); 96 if (ret) { 97 dev_err(s6->dev, "failed to exit sleep mode (%d)\n", ret); 98 return ret; 99 } 100 101 return 0; 102 } 103 104 static int s6d16d0_enable(struct drm_panel *panel) 105 { 106 struct s6d16d0 *s6 = panel_to_s6d16d0(panel); 107 struct mipi_dsi_device *dsi = to_mipi_dsi_device(s6->dev); 108 int ret; 109 110 ret = mipi_dsi_dcs_set_display_on(dsi); 111 if (ret) { 112 dev_err(s6->dev, "failed to turn display on (%d)\n", ret); 113 return ret; 114 } 115 116 return 0; 117 } 118 119 static int s6d16d0_disable(struct drm_panel *panel) 120 { 121 struct s6d16d0 *s6 = panel_to_s6d16d0(panel); 122 struct mipi_dsi_device *dsi = to_mipi_dsi_device(s6->dev); 123 int ret; 124 125 ret = mipi_dsi_dcs_set_display_off(dsi); 126 if (ret) { 127 dev_err(s6->dev, "failed to turn display off (%d)\n", ret); 128 return ret; 129 } 130 131 return 0; 132 } 133 134 static int s6d16d0_get_modes(struct drm_panel *panel, 135 struct drm_connector *connector) 136 { 137 struct drm_display_mode *mode; 138 139 mode = drm_mode_duplicate(connector->dev, &samsung_s6d16d0_mode); 140 if (!mode) { 141 dev_err(panel->dev, "bad mode or failed to add mode\n"); 142 return -EINVAL; 143 } 144 drm_mode_set_name(mode); 145 mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; 146 147 connector->display_info.width_mm = mode->width_mm; 148 connector->display_info.height_mm = mode->height_mm; 149 150 drm_mode_probed_add(connector, mode); 151 152 return 1; /* Number of modes */ 153 } 154 155 static const struct drm_panel_funcs s6d16d0_drm_funcs = { 156 .disable = s6d16d0_disable, 157 .unprepare = s6d16d0_unprepare, 158 .prepare = s6d16d0_prepare, 159 .enable = s6d16d0_enable, 160 .get_modes = s6d16d0_get_modes, 161 }; 162 163 static int s6d16d0_probe(struct mipi_dsi_device *dsi) 164 { 165 struct device *dev = &dsi->dev; 166 struct s6d16d0 *s6; 167 int ret; 168 169 s6 = devm_kzalloc(dev, sizeof(struct s6d16d0), GFP_KERNEL); 170 if (!s6) 171 return -ENOMEM; 172 173 mipi_dsi_set_drvdata(dsi, s6); 174 s6->dev = dev; 175 176 dsi->lanes = 2; 177 dsi->format = MIPI_DSI_FMT_RGB888; 178 dsi->hs_rate = 420160000; 179 dsi->lp_rate = 19200000; 180 /* 181 * This display uses command mode so no MIPI_DSI_MODE_VIDEO 182 * or MIPI_DSI_MODE_VIDEO_SYNC_PULSE 183 * 184 * As we only send commands we do not need to be continuously 185 * clocked. 186 */ 187 dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS; 188 189 s6->supply = devm_regulator_get(dev, "vdd1"); 190 if (IS_ERR(s6->supply)) 191 return PTR_ERR(s6->supply); 192 193 /* This asserts RESET by default */ 194 s6->reset_gpio = devm_gpiod_get_optional(dev, "reset", 195 GPIOD_OUT_HIGH); 196 if (IS_ERR(s6->reset_gpio)) { 197 ret = PTR_ERR(s6->reset_gpio); 198 if (ret != -EPROBE_DEFER) 199 dev_err(dev, "failed to request GPIO (%d)\n", ret); 200 return ret; 201 } 202 203 drm_panel_init(&s6->panel, dev, &s6d16d0_drm_funcs, 204 DRM_MODE_CONNECTOR_DSI); 205 206 drm_panel_add(&s6->panel); 207 208 ret = mipi_dsi_attach(dsi); 209 if (ret < 0) 210 drm_panel_remove(&s6->panel); 211 212 return ret; 213 } 214 215 static void s6d16d0_remove(struct mipi_dsi_device *dsi) 216 { 217 struct s6d16d0 *s6 = mipi_dsi_get_drvdata(dsi); 218 219 mipi_dsi_detach(dsi); 220 drm_panel_remove(&s6->panel); 221 } 222 223 static const struct of_device_id s6d16d0_of_match[] = { 224 { .compatible = "samsung,s6d16d0" }, 225 { } 226 }; 227 MODULE_DEVICE_TABLE(of, s6d16d0_of_match); 228 229 static struct mipi_dsi_driver s6d16d0_driver = { 230 .probe = s6d16d0_probe, 231 .remove = s6d16d0_remove, 232 .driver = { 233 .name = "panel-samsung-s6d16d0", 234 .of_match_table = s6d16d0_of_match, 235 }, 236 }; 237 module_mipi_dsi_driver(s6d16d0_driver); 238 239 MODULE_AUTHOR("Linus Wallei <linus.walleij@linaro.org>"); 240 MODULE_DESCRIPTION("MIPI-DSI s6d16d0 Panel Driver"); 241 MODULE_LICENSE("GPL v2"); 242