1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * MIPI-DSI Samsung s6d16d0 panel driver. This is a 864x480
4  * AMOLED panel with a command-only DSI interface.
5  */
6 
7 #include <drm/drm_modes.h>
8 #include <drm/drm_mipi_dsi.h>
9 #include <drm/drm_panel.h>
10 
11 #include <linux/gpio/consumer.h>
12 #include <linux/regulator/consumer.h>
13 #include <linux/delay.h>
14 #include <linux/of_device.h>
15 #include <linux/module.h>
16 
17 struct s6d16d0 {
18 	struct device *dev;
19 	struct drm_panel panel;
20 	struct regulator *supply;
21 	struct gpio_desc *reset_gpio;
22 };
23 
24 /*
25  * The timings are not very helpful as the display is used in
26  * command mode.
27  */
28 static const struct drm_display_mode samsung_s6d16d0_mode = {
29 	/* HS clock, (htotal*vtotal*vrefresh)/1000 */
30 	.clock = 420160,
31 	.hdisplay = 864,
32 	.hsync_start = 864 + 154,
33 	.hsync_end = 864 + 154 + 16,
34 	.htotal = 864 + 154 + 16 + 32,
35 	.vdisplay = 480,
36 	.vsync_start = 480 + 1,
37 	.vsync_end = 480 + 1 + 1,
38 	.vtotal = 480 + 1 + 1 + 1,
39 	.width_mm = 84,
40 	.height_mm = 48,
41 };
42 
43 static inline struct s6d16d0 *panel_to_s6d16d0(struct drm_panel *panel)
44 {
45 	return container_of(panel, struct s6d16d0, panel);
46 }
47 
48 static int s6d16d0_unprepare(struct drm_panel *panel)
49 {
50 	struct s6d16d0 *s6 = panel_to_s6d16d0(panel);
51 	struct mipi_dsi_device *dsi = to_mipi_dsi_device(s6->dev);
52 	int ret;
53 
54 	/* Enter sleep mode */
55 	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
56 	if (ret) {
57 		dev_err(s6->dev, "failed to enter sleep mode (%d)\n", ret);
58 		return ret;
59 	}
60 
61 	/* Assert RESET */
62 	gpiod_set_value_cansleep(s6->reset_gpio, 1);
63 	regulator_disable(s6->supply);
64 
65 	return 0;
66 }
67 
68 static int s6d16d0_prepare(struct drm_panel *panel)
69 {
70 	struct s6d16d0 *s6 = panel_to_s6d16d0(panel);
71 	struct mipi_dsi_device *dsi = to_mipi_dsi_device(s6->dev);
72 	int ret;
73 
74 	ret = regulator_enable(s6->supply);
75 	if (ret) {
76 		dev_err(s6->dev, "failed to enable supply (%d)\n", ret);
77 		return ret;
78 	}
79 
80 	/* Assert RESET */
81 	gpiod_set_value_cansleep(s6->reset_gpio, 1);
82 	udelay(10);
83 	/* De-assert RESET */
84 	gpiod_set_value_cansleep(s6->reset_gpio, 0);
85 	msleep(120);
86 
87 	/* Enabe tearing mode: send TE (tearing effect) at VBLANK */
88 	ret = mipi_dsi_dcs_set_tear_on(dsi,
89 				       MIPI_DSI_DCS_TEAR_MODE_VBLANK);
90 	if (ret) {
91 		dev_err(s6->dev, "failed to enable vblank TE (%d)\n", ret);
92 		return ret;
93 	}
94 	/* Exit sleep mode and power on */
95 	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
96 	if (ret) {
97 		dev_err(s6->dev, "failed to exit sleep mode (%d)\n", ret);
98 		return ret;
99 	}
100 
101 	return 0;
102 }
103 
104 static int s6d16d0_enable(struct drm_panel *panel)
105 {
106 	struct s6d16d0 *s6 = panel_to_s6d16d0(panel);
107 	struct mipi_dsi_device *dsi = to_mipi_dsi_device(s6->dev);
108 	int ret;
109 
110 	ret = mipi_dsi_dcs_set_display_on(dsi);
111 	if (ret) {
112 		dev_err(s6->dev, "failed to turn display on (%d)\n", ret);
113 		return ret;
114 	}
115 
116 	return 0;
117 }
118 
119 static int s6d16d0_disable(struct drm_panel *panel)
120 {
121 	struct s6d16d0 *s6 = panel_to_s6d16d0(panel);
122 	struct mipi_dsi_device *dsi = to_mipi_dsi_device(s6->dev);
123 	int ret;
124 
125 	ret = mipi_dsi_dcs_set_display_off(dsi);
126 	if (ret) {
127 		dev_err(s6->dev, "failed to turn display off (%d)\n", ret);
128 		return ret;
129 	}
130 
131 	return 0;
132 }
133 
134 static int s6d16d0_get_modes(struct drm_panel *panel,
135 			     struct drm_connector *connector)
136 {
137 	struct drm_display_mode *mode;
138 
139 	mode = drm_mode_duplicate(connector->dev, &samsung_s6d16d0_mode);
140 	if (!mode) {
141 		dev_err(panel->dev, "bad mode or failed to add mode\n");
142 		return -EINVAL;
143 	}
144 	drm_mode_set_name(mode);
145 	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
146 
147 	connector->display_info.width_mm = mode->width_mm;
148 	connector->display_info.height_mm = mode->height_mm;
149 
150 	drm_mode_probed_add(connector, mode);
151 
152 	return 1; /* Number of modes */
153 }
154 
155 static const struct drm_panel_funcs s6d16d0_drm_funcs = {
156 	.disable = s6d16d0_disable,
157 	.unprepare = s6d16d0_unprepare,
158 	.prepare = s6d16d0_prepare,
159 	.enable = s6d16d0_enable,
160 	.get_modes = s6d16d0_get_modes,
161 };
162 
163 static int s6d16d0_probe(struct mipi_dsi_device *dsi)
164 {
165 	struct device *dev = &dsi->dev;
166 	struct s6d16d0 *s6;
167 	int ret;
168 
169 	s6 = devm_kzalloc(dev, sizeof(struct s6d16d0), GFP_KERNEL);
170 	if (!s6)
171 		return -ENOMEM;
172 
173 	mipi_dsi_set_drvdata(dsi, s6);
174 	s6->dev = dev;
175 
176 	dsi->lanes = 2;
177 	dsi->format = MIPI_DSI_FMT_RGB888;
178 	dsi->hs_rate = 420160000;
179 	dsi->lp_rate = 19200000;
180 	/*
181 	 * This display uses command mode so no MIPI_DSI_MODE_VIDEO
182 	 * or MIPI_DSI_MODE_VIDEO_SYNC_PULSE
183 	 *
184 	 * As we only send commands we do not need to be continuously
185 	 * clocked.
186 	 */
187 	dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS;
188 
189 	s6->supply = devm_regulator_get(dev, "vdd1");
190 	if (IS_ERR(s6->supply))
191 		return PTR_ERR(s6->supply);
192 
193 	/* This asserts RESET by default */
194 	s6->reset_gpio = devm_gpiod_get_optional(dev, "reset",
195 						 GPIOD_OUT_HIGH);
196 	if (IS_ERR(s6->reset_gpio)) {
197 		ret = PTR_ERR(s6->reset_gpio);
198 		if (ret != -EPROBE_DEFER)
199 			dev_err(dev, "failed to request GPIO (%d)\n", ret);
200 		return ret;
201 	}
202 
203 	drm_panel_init(&s6->panel, dev, &s6d16d0_drm_funcs,
204 		       DRM_MODE_CONNECTOR_DSI);
205 
206 	drm_panel_add(&s6->panel);
207 
208 	ret = mipi_dsi_attach(dsi);
209 	if (ret < 0)
210 		drm_panel_remove(&s6->panel);
211 
212 	return ret;
213 }
214 
215 static void s6d16d0_remove(struct mipi_dsi_device *dsi)
216 {
217 	struct s6d16d0 *s6 = mipi_dsi_get_drvdata(dsi);
218 
219 	mipi_dsi_detach(dsi);
220 	drm_panel_remove(&s6->panel);
221 }
222 
223 static const struct of_device_id s6d16d0_of_match[] = {
224 	{ .compatible = "samsung,s6d16d0" },
225 	{ }
226 };
227 MODULE_DEVICE_TABLE(of, s6d16d0_of_match);
228 
229 static struct mipi_dsi_driver s6d16d0_driver = {
230 	.probe = s6d16d0_probe,
231 	.remove = s6d16d0_remove,
232 	.driver = {
233 		.name = "panel-samsung-s6d16d0",
234 		.of_match_table = s6d16d0_of_match,
235 	},
236 };
237 module_mipi_dsi_driver(s6d16d0_driver);
238 
239 MODULE_AUTHOR("Linus Wallei <linus.walleij@linaro.org>");
240 MODULE_DESCRIPTION("MIPI-DSI s6d16d0 Panel Driver");
241 MODULE_LICENSE("GPL v2");
242