1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) STMicroelectronics SA 2017
4  *
5  * Authors: Philippe Cornu <philippe.cornu@st.com>
6  *          Yannick Fertre <yannick.fertre@st.com>
7  */
8 
9 #include <linux/backlight.h>
10 #include <linux/delay.h>
11 #include <linux/gpio/consumer.h>
12 #include <linux/module.h>
13 #include <linux/regulator/consumer.h>
14 
15 #include <video/mipi_display.h>
16 
17 #include <drm/drm_mipi_dsi.h>
18 #include <drm/drm_modes.h>
19 #include <drm/drm_panel.h>
20 
21 #define OTM8009A_BACKLIGHT_DEFAULT	240
22 #define OTM8009A_BACKLIGHT_MAX		255
23 
24 /* Manufacturer Command Set */
25 #define MCS_ADRSFT	0x0000	/* Address Shift Function */
26 #define MCS_PANSET	0xB3A6	/* Panel Type Setting */
27 #define MCS_SD_CTRL	0xC0A2	/* Source Driver Timing Setting */
28 #define MCS_P_DRV_M	0xC0B4	/* Panel Driving Mode */
29 #define MCS_OSC_ADJ	0xC181	/* Oscillator Adjustment for Idle/Normal mode */
30 #define MCS_RGB_VID_SET	0xC1A1	/* RGB Video Mode Setting */
31 #define MCS_SD_PCH_CTRL	0xC480	/* Source Driver Precharge Control */
32 #define MCS_NO_DOC1	0xC48A	/* Command not documented */
33 #define MCS_PWR_CTRL1	0xC580	/* Power Control Setting 1 */
34 #define MCS_PWR_CTRL2	0xC590	/* Power Control Setting 2 for Normal Mode */
35 #define MCS_PWR_CTRL4	0xC5B0	/* Power Control Setting 4 for DC Voltage */
36 #define MCS_PANCTRLSET1	0xCB80	/* Panel Control Setting 1 */
37 #define MCS_PANCTRLSET2	0xCB90	/* Panel Control Setting 2 */
38 #define MCS_PANCTRLSET3	0xCBA0	/* Panel Control Setting 3 */
39 #define MCS_PANCTRLSET4	0xCBB0	/* Panel Control Setting 4 */
40 #define MCS_PANCTRLSET5	0xCBC0	/* Panel Control Setting 5 */
41 #define MCS_PANCTRLSET6	0xCBD0	/* Panel Control Setting 6 */
42 #define MCS_PANCTRLSET7	0xCBE0	/* Panel Control Setting 7 */
43 #define MCS_PANCTRLSET8	0xCBF0	/* Panel Control Setting 8 */
44 #define MCS_PANU2D1	0xCC80	/* Panel U2D Setting 1 */
45 #define MCS_PANU2D2	0xCC90	/* Panel U2D Setting 2 */
46 #define MCS_PANU2D3	0xCCA0	/* Panel U2D Setting 3 */
47 #define MCS_PAND2U1	0xCCB0	/* Panel D2U Setting 1 */
48 #define MCS_PAND2U2	0xCCC0	/* Panel D2U Setting 2 */
49 #define MCS_PAND2U3	0xCCD0	/* Panel D2U Setting 3 */
50 #define MCS_GOAVST	0xCE80	/* GOA VST Setting */
51 #define MCS_GOACLKA1	0xCEA0	/* GOA CLKA1 Setting */
52 #define MCS_GOACLKA3	0xCEB0	/* GOA CLKA3 Setting */
53 #define MCS_GOAECLK	0xCFC0	/* GOA ECLK Setting */
54 #define MCS_NO_DOC2	0xCFD0	/* Command not documented */
55 #define MCS_GVDDSET	0xD800	/* GVDD/NGVDD */
56 #define MCS_VCOMDC	0xD900	/* VCOM Voltage Setting */
57 #define MCS_GMCT2_2P	0xE100	/* Gamma Correction 2.2+ Setting */
58 #define MCS_GMCT2_2N	0xE200	/* Gamma Correction 2.2- Setting */
59 #define MCS_NO_DOC3	0xF5B6	/* Command not documented */
60 #define MCS_CMD2_ENA1	0xFF00	/* Enable Access Command2 "CMD2" */
61 #define MCS_CMD2_ENA2	0xFF80	/* Enable Access Orise Command2 */
62 
63 #define OTM8009A_HDISPLAY	480
64 #define OTM8009A_VDISPLAY	800
65 
66 struct otm8009a {
67 	struct device *dev;
68 	struct drm_panel panel;
69 	struct backlight_device *bl_dev;
70 	struct gpio_desc *reset_gpio;
71 	struct regulator *supply;
72 	bool prepared;
73 	bool enabled;
74 };
75 
76 static const struct drm_display_mode modes[] = {
77 	{ /* 50 Hz, preferred */
78 		.clock = 29700,
79 		.hdisplay = 480,
80 		.hsync_start = 480 + 98,
81 		.hsync_end = 480 + 98 + 32,
82 		.htotal = 480 + 98 + 32 + 98,
83 		.vdisplay = 800,
84 		.vsync_start = 800 + 15,
85 		.vsync_end = 800 + 15 + 10,
86 		.vtotal = 800 + 15 + 10 + 14,
87 		.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
88 		.width_mm = 52,
89 		.height_mm = 86,
90 	},
91 	{ /* 60 Hz */
92 		.clock = 33000,
93 		.hdisplay = 480,
94 		.hsync_start = 480 + 70,
95 		.hsync_end = 480 + 70 + 32,
96 		.htotal = 480 + 70 + 32 + 72,
97 		.vdisplay = 800,
98 		.vsync_start = 800 + 15,
99 		.vsync_end = 800 + 15 + 10,
100 		.vtotal = 800 + 15 + 10 + 16,
101 		.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
102 		.width_mm = 52,
103 		.height_mm = 86,
104 	},
105 };
106 
107 static inline struct otm8009a *panel_to_otm8009a(struct drm_panel *panel)
108 {
109 	return container_of(panel, struct otm8009a, panel);
110 }
111 
112 static void otm8009a_dcs_write_buf(struct otm8009a *ctx, const void *data,
113 				   size_t len)
114 {
115 	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
116 
117 	if (mipi_dsi_dcs_write_buffer(dsi, data, len) < 0)
118 		dev_warn(ctx->dev, "mipi dsi dcs write buffer failed\n");
119 }
120 
121 #define dcs_write_seq(ctx, seq...)			\
122 ({							\
123 	static const u8 d[] = { seq };			\
124 	otm8009a_dcs_write_buf(ctx, d, ARRAY_SIZE(d));	\
125 })
126 
127 #define dcs_write_cmd_at(ctx, cmd, seq...)		\
128 ({							\
129 	dcs_write_seq(ctx, MCS_ADRSFT, (cmd) & 0xFF);	\
130 	dcs_write_seq(ctx, (cmd) >> 8, seq);		\
131 })
132 
133 static int otm8009a_init_sequence(struct otm8009a *ctx)
134 {
135 	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
136 	int ret;
137 
138 	/* Enter CMD2 */
139 	dcs_write_cmd_at(ctx, MCS_CMD2_ENA1, 0x80, 0x09, 0x01);
140 
141 	/* Enter Orise Command2 */
142 	dcs_write_cmd_at(ctx, MCS_CMD2_ENA2, 0x80, 0x09);
143 
144 	dcs_write_cmd_at(ctx, MCS_SD_PCH_CTRL, 0x30);
145 	mdelay(10);
146 
147 	dcs_write_cmd_at(ctx, MCS_NO_DOC1, 0x40);
148 	mdelay(10);
149 
150 	dcs_write_cmd_at(ctx, MCS_PWR_CTRL4 + 1, 0xA9);
151 	dcs_write_cmd_at(ctx, MCS_PWR_CTRL2 + 1, 0x34);
152 	dcs_write_cmd_at(ctx, MCS_P_DRV_M, 0x50);
153 	dcs_write_cmd_at(ctx, MCS_VCOMDC, 0x4E);
154 	dcs_write_cmd_at(ctx, MCS_OSC_ADJ, 0x66); /* 65Hz */
155 	dcs_write_cmd_at(ctx, MCS_PWR_CTRL2 + 2, 0x01);
156 	dcs_write_cmd_at(ctx, MCS_PWR_CTRL2 + 5, 0x34);
157 	dcs_write_cmd_at(ctx, MCS_PWR_CTRL2 + 4, 0x33);
158 	dcs_write_cmd_at(ctx, MCS_GVDDSET, 0x79, 0x79);
159 	dcs_write_cmd_at(ctx, MCS_SD_CTRL + 1, 0x1B);
160 	dcs_write_cmd_at(ctx, MCS_PWR_CTRL1 + 2, 0x83);
161 	dcs_write_cmd_at(ctx, MCS_SD_PCH_CTRL + 1, 0x83);
162 	dcs_write_cmd_at(ctx, MCS_RGB_VID_SET, 0x0E);
163 	dcs_write_cmd_at(ctx, MCS_PANSET, 0x00, 0x01);
164 
165 	dcs_write_cmd_at(ctx, MCS_GOAVST, 0x85, 0x01, 0x00, 0x84, 0x01, 0x00);
166 	dcs_write_cmd_at(ctx, MCS_GOACLKA1, 0x18, 0x04, 0x03, 0x39, 0x00, 0x00,
167 			 0x00, 0x18, 0x03, 0x03, 0x3A, 0x00, 0x00, 0x00);
168 	dcs_write_cmd_at(ctx, MCS_GOACLKA3, 0x18, 0x02, 0x03, 0x3B, 0x00, 0x00,
169 			 0x00, 0x18, 0x01, 0x03, 0x3C, 0x00, 0x00, 0x00);
170 	dcs_write_cmd_at(ctx, MCS_GOAECLK, 0x01, 0x01, 0x20, 0x20, 0x00, 0x00,
171 			 0x01, 0x02, 0x00, 0x00);
172 
173 	dcs_write_cmd_at(ctx, MCS_NO_DOC2, 0x00);
174 
175 	dcs_write_cmd_at(ctx, MCS_PANCTRLSET1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
176 	dcs_write_cmd_at(ctx, MCS_PANCTRLSET2, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
177 			 0, 0, 0, 0, 0);
178 	dcs_write_cmd_at(ctx, MCS_PANCTRLSET3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
179 			 0, 0, 0, 0, 0);
180 	dcs_write_cmd_at(ctx, MCS_PANCTRLSET4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
181 	dcs_write_cmd_at(ctx, MCS_PANCTRLSET5, 0, 4, 4, 4, 4, 4, 0, 0, 0, 0,
182 			 0, 0, 0, 0, 0);
183 	dcs_write_cmd_at(ctx, MCS_PANCTRLSET6, 0, 0, 0, 0, 0, 0, 4, 4, 4, 4,
184 			 4, 0, 0, 0, 0);
185 	dcs_write_cmd_at(ctx, MCS_PANCTRLSET7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0);
186 	dcs_write_cmd_at(ctx, MCS_PANCTRLSET8, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
187 			 0xFF, 0xFF, 0xFF, 0xFF, 0xFF);
188 
189 	dcs_write_cmd_at(ctx, MCS_PANU2D1, 0x00, 0x26, 0x09, 0x0B, 0x01, 0x25,
190 			 0x00, 0x00, 0x00, 0x00);
191 	dcs_write_cmd_at(ctx, MCS_PANU2D2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
192 			 0x00, 0x00, 0x00, 0x00, 0x00, 0x26, 0x0A, 0x0C, 0x02);
193 	dcs_write_cmd_at(ctx, MCS_PANU2D3, 0x25, 0x00, 0x00, 0x00, 0x00, 0x00,
194 			 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
195 	dcs_write_cmd_at(ctx, MCS_PAND2U1, 0x00, 0x25, 0x0C, 0x0A, 0x02, 0x26,
196 			 0x00, 0x00, 0x00, 0x00);
197 	dcs_write_cmd_at(ctx, MCS_PAND2U2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
198 			 0x00, 0x00, 0x00, 0x00, 0x00, 0x25, 0x0B, 0x09, 0x01);
199 	dcs_write_cmd_at(ctx, MCS_PAND2U3, 0x26, 0x00, 0x00, 0x00, 0x00, 0x00,
200 			 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00);
201 
202 	dcs_write_cmd_at(ctx, MCS_PWR_CTRL1 + 1, 0x66);
203 
204 	dcs_write_cmd_at(ctx, MCS_NO_DOC3, 0x06);
205 
206 	dcs_write_cmd_at(ctx, MCS_GMCT2_2P, 0x00, 0x09, 0x0F, 0x0E, 0x07, 0x10,
207 			 0x0B, 0x0A, 0x04, 0x07, 0x0B, 0x08, 0x0F, 0x10, 0x0A,
208 			 0x01);
209 	dcs_write_cmd_at(ctx, MCS_GMCT2_2N, 0x00, 0x09, 0x0F, 0x0E, 0x07, 0x10,
210 			 0x0B, 0x0A, 0x04, 0x07, 0x0B, 0x08, 0x0F, 0x10, 0x0A,
211 			 0x01);
212 
213 	/* Exit CMD2 */
214 	dcs_write_cmd_at(ctx, MCS_CMD2_ENA1, 0xFF, 0xFF, 0xFF);
215 
216 	ret = mipi_dsi_dcs_nop(dsi);
217 	if (ret)
218 		return ret;
219 
220 	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
221 	if (ret)
222 		return ret;
223 
224 	/* Wait for sleep out exit */
225 	mdelay(120);
226 
227 	/* Default portrait 480x800 rgb24 */
228 	dcs_write_seq(ctx, MIPI_DCS_SET_ADDRESS_MODE, 0x00);
229 
230 	ret = mipi_dsi_dcs_set_column_address(dsi, 0, OTM8009A_HDISPLAY - 1);
231 	if (ret)
232 		return ret;
233 
234 	ret = mipi_dsi_dcs_set_page_address(dsi, 0, OTM8009A_VDISPLAY - 1);
235 	if (ret)
236 		return ret;
237 
238 	/* See otm8009a driver documentation for pixel format descriptions */
239 	ret = mipi_dsi_dcs_set_pixel_format(dsi, MIPI_DCS_PIXEL_FMT_24BIT |
240 					    MIPI_DCS_PIXEL_FMT_24BIT << 4);
241 	if (ret)
242 		return ret;
243 
244 	/* Disable CABC feature */
245 	dcs_write_seq(ctx, MIPI_DCS_WRITE_POWER_SAVE, 0x00);
246 
247 	ret = mipi_dsi_dcs_set_display_on(dsi);
248 	if (ret)
249 		return ret;
250 
251 	ret = mipi_dsi_dcs_nop(dsi);
252 	if (ret)
253 		return ret;
254 
255 	/* Send Command GRAM memory write (no parameters) */
256 	dcs_write_seq(ctx, MIPI_DCS_WRITE_MEMORY_START);
257 
258 	/* Wait a short while to let the panel be ready before the 1st frame */
259 	mdelay(10);
260 
261 	return 0;
262 }
263 
264 static int otm8009a_disable(struct drm_panel *panel)
265 {
266 	struct otm8009a *ctx = panel_to_otm8009a(panel);
267 	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
268 	int ret;
269 
270 	if (!ctx->enabled)
271 		return 0; /* This is not an issue so we return 0 here */
272 
273 	backlight_disable(ctx->bl_dev);
274 
275 	ret = mipi_dsi_dcs_set_display_off(dsi);
276 	if (ret)
277 		return ret;
278 
279 	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
280 	if (ret)
281 		return ret;
282 
283 	msleep(120);
284 
285 	ctx->enabled = false;
286 
287 	return 0;
288 }
289 
290 static int otm8009a_unprepare(struct drm_panel *panel)
291 {
292 	struct otm8009a *ctx = panel_to_otm8009a(panel);
293 
294 	if (!ctx->prepared)
295 		return 0;
296 
297 	if (ctx->reset_gpio) {
298 		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
299 		msleep(20);
300 	}
301 
302 	regulator_disable(ctx->supply);
303 
304 	ctx->prepared = false;
305 
306 	return 0;
307 }
308 
309 static int otm8009a_prepare(struct drm_panel *panel)
310 {
311 	struct otm8009a *ctx = panel_to_otm8009a(panel);
312 	int ret;
313 
314 	if (ctx->prepared)
315 		return 0;
316 
317 	ret = regulator_enable(ctx->supply);
318 	if (ret < 0) {
319 		dev_err(panel->dev, "failed to enable supply: %d\n", ret);
320 		return ret;
321 	}
322 
323 	if (ctx->reset_gpio) {
324 		gpiod_set_value_cansleep(ctx->reset_gpio, 0);
325 		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
326 		msleep(20);
327 		gpiod_set_value_cansleep(ctx->reset_gpio, 0);
328 		msleep(100);
329 	}
330 
331 	ret = otm8009a_init_sequence(ctx);
332 	if (ret)
333 		return ret;
334 
335 	ctx->prepared = true;
336 
337 	return 0;
338 }
339 
340 static int otm8009a_enable(struct drm_panel *panel)
341 {
342 	struct otm8009a *ctx = panel_to_otm8009a(panel);
343 
344 	if (ctx->enabled)
345 		return 0;
346 
347 	backlight_enable(ctx->bl_dev);
348 
349 	ctx->enabled = true;
350 
351 	return 0;
352 }
353 
354 static int otm8009a_get_modes(struct drm_panel *panel,
355 			      struct drm_connector *connector)
356 {
357 	struct drm_display_mode *mode;
358 	unsigned int num_modes = ARRAY_SIZE(modes);
359 	unsigned int i;
360 
361 	for (i = 0; i < num_modes; i++) {
362 		mode = drm_mode_duplicate(connector->dev, &modes[i]);
363 		if (!mode) {
364 			dev_err(panel->dev, "failed to add mode %ux%u@%u\n",
365 				modes[i].hdisplay,
366 				modes[i].vdisplay,
367 				drm_mode_vrefresh(&modes[i]));
368 			return -ENOMEM;
369 		}
370 
371 		mode->type = DRM_MODE_TYPE_DRIVER;
372 
373 		/* Setting first mode as preferred */
374 		if (!i)
375 			mode->type |=  DRM_MODE_TYPE_PREFERRED;
376 
377 		drm_mode_set_name(mode);
378 		drm_mode_probed_add(connector, mode);
379 	}
380 
381 	connector->display_info.width_mm = mode->width_mm;
382 	connector->display_info.height_mm = mode->height_mm;
383 
384 	return num_modes;
385 }
386 
387 static const struct drm_panel_funcs otm8009a_drm_funcs = {
388 	.disable   = otm8009a_disable,
389 	.unprepare = otm8009a_unprepare,
390 	.prepare   = otm8009a_prepare,
391 	.enable    = otm8009a_enable,
392 	.get_modes = otm8009a_get_modes,
393 };
394 
395 /*
396  * DSI-BASED BACKLIGHT
397  */
398 
399 static int otm8009a_backlight_update_status(struct backlight_device *bd)
400 {
401 	struct otm8009a *ctx = bl_get_data(bd);
402 	u8 data[2];
403 
404 	if (!ctx->prepared) {
405 		dev_dbg(&bd->dev, "lcd not ready yet for setting its backlight!\n");
406 		return -ENXIO;
407 	}
408 
409 	if (bd->props.power <= FB_BLANK_NORMAL) {
410 		/* Power on the backlight with the requested brightness
411 		 * Note We can not use mipi_dsi_dcs_set_display_brightness()
412 		 * as otm8009a driver support only 8-bit brightness (1 param).
413 		 */
414 		data[0] = MIPI_DCS_SET_DISPLAY_BRIGHTNESS;
415 		data[1] = bd->props.brightness;
416 		otm8009a_dcs_write_buf(ctx, data, ARRAY_SIZE(data));
417 
418 		/* set Brightness Control & Backlight on */
419 		data[1] = 0x24;
420 
421 	} else {
422 		/* Power off the backlight: set Brightness Control & Bl off */
423 		data[1] = 0;
424 	}
425 
426 	/* Update Brightness Control & Backlight */
427 	data[0] = MIPI_DCS_WRITE_CONTROL_DISPLAY;
428 	otm8009a_dcs_write_buf(ctx, data, ARRAY_SIZE(data));
429 
430 	return 0;
431 }
432 
433 static const struct backlight_ops otm8009a_backlight_ops = {
434 	.update_status = otm8009a_backlight_update_status,
435 };
436 
437 static int otm8009a_probe(struct mipi_dsi_device *dsi)
438 {
439 	struct device *dev = &dsi->dev;
440 	struct otm8009a *ctx;
441 	int ret;
442 
443 	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
444 	if (!ctx)
445 		return -ENOMEM;
446 
447 	ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
448 	if (IS_ERR(ctx->reset_gpio)) {
449 		dev_err(dev, "cannot get reset-gpio\n");
450 		return PTR_ERR(ctx->reset_gpio);
451 	}
452 
453 	ctx->supply = devm_regulator_get(dev, "power");
454 	if (IS_ERR(ctx->supply)) {
455 		ret = PTR_ERR(ctx->supply);
456 		if (ret != -EPROBE_DEFER)
457 			dev_err(dev, "failed to request regulator: %d\n", ret);
458 		return ret;
459 	}
460 
461 	mipi_dsi_set_drvdata(dsi, ctx);
462 
463 	ctx->dev = dev;
464 
465 	dsi->lanes = 2;
466 	dsi->format = MIPI_DSI_FMT_RGB888;
467 	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
468 			  MIPI_DSI_MODE_LPM | MIPI_DSI_CLOCK_NON_CONTINUOUS;
469 
470 	drm_panel_init(&ctx->panel, dev, &otm8009a_drm_funcs,
471 		       DRM_MODE_CONNECTOR_DSI);
472 
473 	ctx->bl_dev = devm_backlight_device_register(dev, dev_name(dev),
474 						     dsi->host->dev, ctx,
475 						     &otm8009a_backlight_ops,
476 						     NULL);
477 	if (IS_ERR(ctx->bl_dev)) {
478 		ret = PTR_ERR(ctx->bl_dev);
479 		dev_err(dev, "failed to register backlight: %d\n", ret);
480 		return ret;
481 	}
482 
483 	ctx->bl_dev->props.max_brightness = OTM8009A_BACKLIGHT_MAX;
484 	ctx->bl_dev->props.brightness = OTM8009A_BACKLIGHT_DEFAULT;
485 	ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
486 	ctx->bl_dev->props.type = BACKLIGHT_RAW;
487 
488 	drm_panel_add(&ctx->panel);
489 
490 	ret = mipi_dsi_attach(dsi);
491 	if (ret < 0) {
492 		dev_err(dev, "mipi_dsi_attach failed. Is host ready?\n");
493 		drm_panel_remove(&ctx->panel);
494 		return ret;
495 	}
496 
497 	return 0;
498 }
499 
500 static int otm8009a_remove(struct mipi_dsi_device *dsi)
501 {
502 	struct otm8009a *ctx = mipi_dsi_get_drvdata(dsi);
503 
504 	mipi_dsi_detach(dsi);
505 	drm_panel_remove(&ctx->panel);
506 
507 	return 0;
508 }
509 
510 static const struct of_device_id orisetech_otm8009a_of_match[] = {
511 	{ .compatible = "orisetech,otm8009a" },
512 	{ }
513 };
514 MODULE_DEVICE_TABLE(of, orisetech_otm8009a_of_match);
515 
516 static struct mipi_dsi_driver orisetech_otm8009a_driver = {
517 	.probe  = otm8009a_probe,
518 	.remove = otm8009a_remove,
519 	.driver = {
520 		.name = "panel-orisetech-otm8009a",
521 		.of_match_table = orisetech_otm8009a_of_match,
522 	},
523 };
524 module_mipi_dsi_driver(orisetech_otm8009a_driver);
525 
526 MODULE_AUTHOR("Philippe Cornu <philippe.cornu@st.com>");
527 MODULE_AUTHOR("Yannick Fertre <yannick.fertre@st.com>");
528 MODULE_DESCRIPTION("DRM driver for Orise Tech OTM8009A MIPI DSI panel");
529 MODULE_LICENSE("GPL v2");
530