1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Novatek NT35950 DriverIC panels driver 4 * 5 * Copyright (c) 2021 AngeloGioacchino Del Regno 6 * <angelogioacchino.delregno@somainline.org> 7 */ 8 #include <linux/delay.h> 9 #include <linux/gpio/consumer.h> 10 #include <linux/module.h> 11 #include <linux/of_device.h> 12 #include <linux/of_graph.h> 13 #include <linux/regulator/consumer.h> 14 15 #include <drm/drm_connector.h> 16 #include <drm/drm_crtc.h> 17 #include <drm/drm_mipi_dsi.h> 18 #include <drm/drm_modes.h> 19 #include <drm/drm_panel.h> 20 21 #define MCS_CMD_MAUCCTR 0xf0 /* Manufacturer command enable */ 22 #define MCS_PARAM_SCALER_FUNCTION 0x58 /* Scale-up function */ 23 #define MCS_PARAM_SCALEUP_MODE 0xc9 24 #define MCS_SCALEUP_SIMPLE 0x0 25 #define MCS_SCALEUP_BILINEAR BIT(0) 26 #define MCS_SCALEUP_DUPLICATE (BIT(0) | BIT(4)) 27 28 /* VESA Display Stream Compression param */ 29 #define MCS_PARAM_VESA_DSC_ON 0x03 30 31 /* Data Compression mode */ 32 #define MCS_PARAM_DATA_COMPRESSION 0x90 33 #define MCS_DATA_COMPRESSION_NONE 0x00 34 #define MCS_DATA_COMPRESSION_FBC 0x02 35 #define MCS_DATA_COMPRESSION_DSC 0x03 36 37 /* Display Output control */ 38 #define MCS_PARAM_DISP_OUTPUT_CTRL 0xb4 39 #define MCS_DISP_OUT_SRAM_EN BIT(0) 40 #define MCS_DISP_OUT_VIDEO_MODE BIT(4) 41 42 /* VESA Display Stream Compression setting */ 43 #define MCS_PARAM_VESA_DSC_SETTING 0xc0 44 45 /* SubPixel Rendering (SPR) */ 46 #define MCS_PARAM_SPR_EN 0xe3 47 #define MCS_PARAM_SPR_MODE 0xef 48 #define MCS_SPR_MODE_YYG_RAINBOW_RGB 0x01 49 50 #define NT35950_VREG_MAX 4 51 52 struct nt35950 { 53 struct drm_panel panel; 54 struct drm_connector *connector; 55 struct mipi_dsi_device *dsi[2]; 56 struct regulator_bulk_data vregs[NT35950_VREG_MAX]; 57 struct gpio_desc *reset_gpio; 58 const struct nt35950_panel_desc *desc; 59 60 int cur_mode; 61 u8 last_page; 62 bool prepared; 63 }; 64 65 struct nt35950_panel_mode { 66 const struct drm_display_mode mode; 67 68 bool enable_sram; 69 bool is_video_mode; 70 u8 scaler_on; 71 u8 scaler_mode; 72 u8 compression; 73 u8 spr_en; 74 u8 spr_mode; 75 }; 76 77 struct nt35950_panel_desc { 78 const char *model_name; 79 const struct mipi_dsi_device_info dsi_info; 80 const struct nt35950_panel_mode *mode_data; 81 82 bool is_dual_dsi; 83 u8 num_lanes; 84 u8 num_modes; 85 }; 86 87 static inline struct nt35950 *to_nt35950(struct drm_panel *panel) 88 { 89 return container_of(panel, struct nt35950, panel); 90 } 91 92 #define dsi_dcs_write_seq(dsi, seq...) do { \ 93 static const u8 d[] = { seq }; \ 94 int ret; \ 95 ret = mipi_dsi_dcs_write_buffer(dsi, d, ARRAY_SIZE(d)); \ 96 if (ret < 0) \ 97 return ret; \ 98 } while (0) 99 100 static void nt35950_reset(struct nt35950 *nt) 101 { 102 gpiod_set_value_cansleep(nt->reset_gpio, 1); 103 usleep_range(12000, 13000); 104 gpiod_set_value_cansleep(nt->reset_gpio, 0); 105 usleep_range(300, 400); 106 gpiod_set_value_cansleep(nt->reset_gpio, 1); 107 usleep_range(12000, 13000); 108 } 109 110 /* 111 * nt35950_set_cmd2_page - Select manufacturer control (CMD2) page 112 * @nt: Main driver structure 113 * @page: Page number (0-7) 114 * 115 * Return: Number of transferred bytes or negative number on error 116 */ 117 static int nt35950_set_cmd2_page(struct nt35950 *nt, u8 page) 118 { 119 const u8 mauc_cmd2_page[] = { MCS_CMD_MAUCCTR, 0x55, 0xaa, 0x52, 120 0x08, page }; 121 int ret; 122 123 ret = mipi_dsi_dcs_write_buffer(nt->dsi[0], mauc_cmd2_page, 124 ARRAY_SIZE(mauc_cmd2_page)); 125 if (ret < 0) 126 return ret; 127 128 nt->last_page = page; 129 return 0; 130 } 131 132 /* 133 * nt35950_set_data_compression - Set data compression mode 134 * @nt: Main driver structure 135 * @comp_mode: Compression mode 136 * 137 * Return: Number of transferred bytes or negative number on error 138 */ 139 static int nt35950_set_data_compression(struct nt35950 *nt, u8 comp_mode) 140 { 141 u8 cmd_data_compression[] = { MCS_PARAM_DATA_COMPRESSION, comp_mode }; 142 u8 cmd_vesa_dsc_on[] = { MCS_PARAM_VESA_DSC_ON, !!comp_mode }; 143 u8 cmd_vesa_dsc_setting[] = { MCS_PARAM_VESA_DSC_SETTING, 0x03 }; 144 u8 last_page = nt->last_page; 145 int ret; 146 147 /* Set CMD2 Page 0 if we're not there yet */ 148 if (last_page != 0) { 149 ret = nt35950_set_cmd2_page(nt, 0); 150 if (ret < 0) 151 return ret; 152 } 153 154 ret = mipi_dsi_dcs_write_buffer(nt->dsi[0], cmd_data_compression, 155 ARRAY_SIZE(cmd_data_compression)); 156 if (ret < 0) 157 return ret; 158 159 ret = mipi_dsi_dcs_write_buffer(nt->dsi[0], cmd_vesa_dsc_on, 160 ARRAY_SIZE(cmd_vesa_dsc_on)); 161 if (ret < 0) 162 return ret; 163 164 /* Set the vesa dsc setting on Page 4 */ 165 ret = nt35950_set_cmd2_page(nt, 4); 166 if (ret < 0) 167 return ret; 168 169 /* Display Stream Compression setting, always 0x03 */ 170 ret = mipi_dsi_dcs_write_buffer(nt->dsi[0], cmd_vesa_dsc_setting, 171 ARRAY_SIZE(cmd_vesa_dsc_setting)); 172 if (ret < 0) 173 return ret; 174 175 /* Get back to the previously set page */ 176 return nt35950_set_cmd2_page(nt, last_page); 177 } 178 179 /* 180 * nt35950_set_scaler - Enable/disable resolution upscaling 181 * @nt: Main driver structure 182 * @scale_up: Scale up function control 183 * 184 * Return: Number of transferred bytes or negative number on error 185 */ 186 static int nt35950_set_scaler(struct nt35950 *nt, u8 scale_up) 187 { 188 u8 cmd_scaler[] = { MCS_PARAM_SCALER_FUNCTION, scale_up }; 189 190 return mipi_dsi_dcs_write_buffer(nt->dsi[0], cmd_scaler, 191 ARRAY_SIZE(cmd_scaler)); 192 } 193 194 /* 195 * nt35950_set_scale_mode - Resolution upscaling mode 196 * @nt: Main driver structure 197 * @mode: Scaler mode (MCS_DATA_COMPRESSION_*) 198 * 199 * Return: Number of transferred bytes or negative number on error 200 */ 201 static int nt35950_set_scale_mode(struct nt35950 *nt, u8 mode) 202 { 203 u8 cmd_scaler[] = { MCS_PARAM_SCALEUP_MODE, mode }; 204 205 return mipi_dsi_dcs_write_buffer(nt->dsi[0], cmd_scaler, 206 ARRAY_SIZE(cmd_scaler)); 207 } 208 209 /* 210 * nt35950_inject_black_image - Display a completely black image 211 * @nt: Main driver structure 212 * 213 * After IC setup, the attached panel may show random data 214 * due to driveric behavior changes (resolution, compression, 215 * scaling, etc). This function, called after parameters setup, 216 * makes the driver ic to output a completely black image to 217 * the display. 218 * It makes sense to push a black image before sending the sleep-out 219 * and display-on commands. 220 * 221 * Return: Number of transferred bytes or negative number on error 222 */ 223 static int nt35950_inject_black_image(struct nt35950 *nt) 224 { 225 const u8 cmd0_black_img[] = { 0x6f, 0x01 }; 226 const u8 cmd1_black_img[] = { 0xf3, 0x10 }; 227 u8 cmd_test[] = { 0xff, 0xaa, 0x55, 0xa5, 0x80 }; 228 int ret; 229 230 /* Enable test command */ 231 ret = mipi_dsi_dcs_write_buffer(nt->dsi[0], cmd_test, ARRAY_SIZE(cmd_test)); 232 if (ret < 0) 233 return ret; 234 235 /* Send a black image */ 236 ret = mipi_dsi_dcs_write_buffer(nt->dsi[0], cmd0_black_img, 237 ARRAY_SIZE(cmd0_black_img)); 238 if (ret < 0) 239 return ret; 240 ret = mipi_dsi_dcs_write_buffer(nt->dsi[0], cmd1_black_img, 241 ARRAY_SIZE(cmd1_black_img)); 242 if (ret < 0) 243 return ret; 244 245 /* Disable test command */ 246 cmd_test[ARRAY_SIZE(cmd_test) - 1] = 0x00; 247 return mipi_dsi_dcs_write_buffer(nt->dsi[0], cmd_test, ARRAY_SIZE(cmd_test)); 248 } 249 250 /* 251 * nt35950_set_dispout - Set Display Output register parameters 252 * @nt: Main driver structure 253 * 254 * Return: Number of transferred bytes or negative number on error 255 */ 256 static int nt35950_set_dispout(struct nt35950 *nt) 257 { 258 u8 cmd_dispout[] = { MCS_PARAM_DISP_OUTPUT_CTRL, 0x00 }; 259 const struct nt35950_panel_mode *mode_data = nt->desc->mode_data; 260 261 if (mode_data[nt->cur_mode].is_video_mode) 262 cmd_dispout[1] |= MCS_DISP_OUT_VIDEO_MODE; 263 if (mode_data[nt->cur_mode].enable_sram) 264 cmd_dispout[1] |= MCS_DISP_OUT_SRAM_EN; 265 266 return mipi_dsi_dcs_write_buffer(nt->dsi[0], cmd_dispout, 267 ARRAY_SIZE(cmd_dispout)); 268 } 269 270 static int nt35950_get_current_mode(struct nt35950 *nt) 271 { 272 struct drm_connector *connector = nt->connector; 273 struct drm_crtc_state *crtc_state; 274 int i; 275 276 /* Return the default (first) mode if no info available yet */ 277 if (!connector->state || !connector->state->crtc) 278 return 0; 279 280 crtc_state = connector->state->crtc->state; 281 282 for (i = 0; i < nt->desc->num_modes; i++) { 283 if (drm_mode_match(&crtc_state->mode, 284 &nt->desc->mode_data[i].mode, 285 DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_CLOCK)) 286 return i; 287 } 288 289 return 0; 290 } 291 292 static int nt35950_on(struct nt35950 *nt) 293 { 294 const struct nt35950_panel_mode *mode_data = nt->desc->mode_data; 295 struct mipi_dsi_device *dsi = nt->dsi[0]; 296 struct device *dev = &dsi->dev; 297 int ret; 298 299 nt->cur_mode = nt35950_get_current_mode(nt); 300 nt->dsi[0]->mode_flags |= MIPI_DSI_MODE_LPM; 301 nt->dsi[1]->mode_flags |= MIPI_DSI_MODE_LPM; 302 303 ret = nt35950_set_cmd2_page(nt, 0); 304 if (ret < 0) 305 return ret; 306 307 ret = nt35950_set_data_compression(nt, mode_data[nt->cur_mode].compression); 308 if (ret < 0) 309 return ret; 310 311 ret = nt35950_set_scale_mode(nt, mode_data[nt->cur_mode].scaler_mode); 312 if (ret < 0) 313 return ret; 314 315 ret = nt35950_set_scaler(nt, mode_data[nt->cur_mode].scaler_on); 316 if (ret < 0) 317 return ret; 318 319 ret = nt35950_set_dispout(nt); 320 if (ret < 0) 321 return ret; 322 323 ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK); 324 if (ret < 0) { 325 dev_err(dev, "Failed to set tear on: %d\n", ret); 326 return ret; 327 } 328 329 ret = mipi_dsi_dcs_set_tear_scanline(dsi, 0); 330 if (ret < 0) { 331 dev_err(dev, "Failed to set tear scanline: %d\n", ret); 332 return ret; 333 } 334 335 /* CMD2 Page 1 */ 336 ret = nt35950_set_cmd2_page(nt, 1); 337 if (ret < 0) 338 return ret; 339 340 /* Unknown command */ 341 dsi_dcs_write_seq(dsi, 0xd4, 0x88, 0x88); 342 343 /* CMD2 Page 7 */ 344 ret = nt35950_set_cmd2_page(nt, 7); 345 if (ret < 0) 346 return ret; 347 348 /* Enable SubPixel Rendering */ 349 dsi_dcs_write_seq(dsi, MCS_PARAM_SPR_EN, 0x01); 350 351 /* SPR Mode: YYG Rainbow-RGB */ 352 dsi_dcs_write_seq(dsi, MCS_PARAM_SPR_MODE, MCS_SPR_MODE_YYG_RAINBOW_RGB); 353 354 /* CMD3 */ 355 ret = nt35950_inject_black_image(nt); 356 if (ret < 0) 357 return ret; 358 359 ret = mipi_dsi_dcs_exit_sleep_mode(dsi); 360 if (ret < 0) 361 return ret; 362 msleep(120); 363 364 ret = mipi_dsi_dcs_set_display_on(dsi); 365 if (ret < 0) 366 return ret; 367 msleep(120); 368 369 nt->dsi[0]->mode_flags &= ~MIPI_DSI_MODE_LPM; 370 nt->dsi[1]->mode_flags &= ~MIPI_DSI_MODE_LPM; 371 372 return 0; 373 } 374 375 static int nt35950_off(struct nt35950 *nt) 376 { 377 struct device *dev = &nt->dsi[0]->dev; 378 int ret; 379 380 ret = mipi_dsi_dcs_set_display_off(nt->dsi[0]); 381 if (ret < 0) { 382 dev_err(dev, "Failed to set display off: %d\n", ret); 383 goto set_lpm; 384 } 385 usleep_range(10000, 11000); 386 387 ret = mipi_dsi_dcs_enter_sleep_mode(nt->dsi[0]); 388 if (ret < 0) { 389 dev_err(dev, "Failed to enter sleep mode: %d\n", ret); 390 goto set_lpm; 391 } 392 msleep(150); 393 394 set_lpm: 395 nt->dsi[0]->mode_flags |= MIPI_DSI_MODE_LPM; 396 nt->dsi[1]->mode_flags |= MIPI_DSI_MODE_LPM; 397 398 return 0; 399 } 400 401 static int nt35950_sharp_init_vregs(struct nt35950 *nt, struct device *dev) 402 { 403 int ret; 404 405 nt->vregs[0].supply = "vddio"; 406 nt->vregs[1].supply = "avdd"; 407 nt->vregs[2].supply = "avee"; 408 nt->vregs[3].supply = "dvdd"; 409 ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(nt->vregs), 410 nt->vregs); 411 if (ret < 0) 412 return ret; 413 414 ret = regulator_is_supported_voltage(nt->vregs[0].consumer, 415 1750000, 1950000); 416 if (!ret) 417 return -EINVAL; 418 ret = regulator_is_supported_voltage(nt->vregs[1].consumer, 419 5200000, 5900000); 420 if (!ret) 421 return -EINVAL; 422 /* AVEE is negative: -5.90V to -5.20V */ 423 ret = regulator_is_supported_voltage(nt->vregs[2].consumer, 424 5200000, 5900000); 425 if (!ret) 426 return -EINVAL; 427 428 ret = regulator_is_supported_voltage(nt->vregs[3].consumer, 429 1300000, 1400000); 430 if (!ret) 431 return -EINVAL; 432 433 return 0; 434 } 435 436 static int nt35950_prepare(struct drm_panel *panel) 437 { 438 struct nt35950 *nt = to_nt35950(panel); 439 struct device *dev = &nt->dsi[0]->dev; 440 int ret; 441 442 if (nt->prepared) 443 return 0; 444 445 ret = regulator_enable(nt->vregs[0].consumer); 446 if (ret) 447 return ret; 448 usleep_range(2000, 5000); 449 450 ret = regulator_enable(nt->vregs[3].consumer); 451 if (ret) 452 goto end; 453 usleep_range(15000, 18000); 454 455 ret = regulator_enable(nt->vregs[1].consumer); 456 if (ret) 457 goto end; 458 459 ret = regulator_enable(nt->vregs[2].consumer); 460 if (ret) 461 goto end; 462 usleep_range(12000, 13000); 463 464 nt35950_reset(nt); 465 466 ret = nt35950_on(nt); 467 if (ret < 0) { 468 dev_err(dev, "Failed to initialize panel: %d\n", ret); 469 goto end; 470 } 471 nt->prepared = true; 472 473 end: 474 if (ret < 0) { 475 regulator_bulk_disable(ARRAY_SIZE(nt->vregs), nt->vregs); 476 return ret; 477 } 478 479 return 0; 480 } 481 482 static int nt35950_unprepare(struct drm_panel *panel) 483 { 484 struct nt35950 *nt = to_nt35950(panel); 485 struct device *dev = &nt->dsi[0]->dev; 486 int ret; 487 488 if (!nt->prepared) 489 return 0; 490 491 ret = nt35950_off(nt); 492 if (ret < 0) 493 dev_err(dev, "Failed to deinitialize panel: %d\n", ret); 494 495 gpiod_set_value_cansleep(nt->reset_gpio, 0); 496 regulator_bulk_disable(ARRAY_SIZE(nt->vregs), nt->vregs); 497 498 nt->prepared = false; 499 return 0; 500 } 501 502 static int nt35950_get_modes(struct drm_panel *panel, 503 struct drm_connector *connector) 504 { 505 struct nt35950 *nt = to_nt35950(panel); 506 int i; 507 508 for (i = 0; i < nt->desc->num_modes; i++) { 509 struct drm_display_mode *mode; 510 511 mode = drm_mode_duplicate(connector->dev, 512 &nt->desc->mode_data[i].mode); 513 if (!mode) 514 return -ENOMEM; 515 516 drm_mode_set_name(mode); 517 518 mode->type |= DRM_MODE_TYPE_DRIVER; 519 if (nt->desc->num_modes == 1) 520 mode->type |= DRM_MODE_TYPE_PREFERRED; 521 522 drm_mode_probed_add(connector, mode); 523 } 524 525 connector->display_info.bpc = 8; 526 connector->display_info.height_mm = nt->desc->mode_data[0].mode.height_mm; 527 connector->display_info.width_mm = nt->desc->mode_data[0].mode.width_mm; 528 nt->connector = connector; 529 530 return nt->desc->num_modes; 531 } 532 533 static const struct drm_panel_funcs nt35950_panel_funcs = { 534 .prepare = nt35950_prepare, 535 .unprepare = nt35950_unprepare, 536 .get_modes = nt35950_get_modes, 537 }; 538 539 static int nt35950_probe(struct mipi_dsi_device *dsi) 540 { 541 struct device *dev = &dsi->dev; 542 struct device_node *dsi_r; 543 struct mipi_dsi_host *dsi_r_host; 544 struct nt35950 *nt; 545 const struct mipi_dsi_device_info *info; 546 int i, num_dsis = 1, ret; 547 548 nt = devm_kzalloc(dev, sizeof(*nt), GFP_KERNEL); 549 if (!nt) 550 return -ENOMEM; 551 552 ret = nt35950_sharp_init_vregs(nt, dev); 553 if (ret) 554 return dev_err_probe(dev, ret, "Regulator init failure.\n"); 555 556 nt->desc = of_device_get_match_data(dev); 557 if (!nt->desc) 558 return -ENODEV; 559 560 nt->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_ASIS); 561 if (IS_ERR(nt->reset_gpio)) { 562 return dev_err_probe(dev, PTR_ERR(nt->reset_gpio), 563 "Failed to get reset gpio\n"); 564 } 565 566 /* If the panel is connected on two DSIs then DSI0 left, DSI1 right */ 567 if (nt->desc->is_dual_dsi) { 568 info = &nt->desc->dsi_info; 569 dsi_r = of_graph_get_remote_node(dsi->dev.of_node, 1, -1); 570 if (!dsi_r) { 571 dev_err(dev, "Cannot get secondary DSI node.\n"); 572 return -ENODEV; 573 } 574 dsi_r_host = of_find_mipi_dsi_host_by_node(dsi_r); 575 of_node_put(dsi_r); 576 if (!dsi_r_host) { 577 dev_err(dev, "Cannot get secondary DSI host\n"); 578 return -EPROBE_DEFER; 579 } 580 581 nt->dsi[1] = mipi_dsi_device_register_full(dsi_r_host, info); 582 if (!nt->dsi[1]) { 583 dev_err(dev, "Cannot get secondary DSI node\n"); 584 return -ENODEV; 585 } 586 num_dsis++; 587 } 588 589 nt->dsi[0] = dsi; 590 mipi_dsi_set_drvdata(dsi, nt); 591 592 drm_panel_init(&nt->panel, dev, &nt35950_panel_funcs, 593 DRM_MODE_CONNECTOR_DSI); 594 595 ret = drm_panel_of_backlight(&nt->panel); 596 if (ret) 597 return dev_err_probe(dev, ret, "Failed to get backlight\n"); 598 599 drm_panel_add(&nt->panel); 600 601 for (i = 0; i < num_dsis; i++) { 602 nt->dsi[i]->lanes = nt->desc->num_lanes; 603 nt->dsi[i]->format = MIPI_DSI_FMT_RGB888; 604 605 nt->dsi[i]->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS | 606 MIPI_DSI_MODE_LPM; 607 608 if (nt->desc->mode_data[0].is_video_mode) 609 nt->dsi[i]->mode_flags |= MIPI_DSI_MODE_VIDEO; 610 611 ret = mipi_dsi_attach(nt->dsi[i]); 612 if (ret < 0) { 613 return dev_err_probe(dev, ret, 614 "Cannot attach to DSI%d host.\n", i); 615 } 616 } 617 618 /* Make sure to set RESX LOW before starting the power-on sequence */ 619 gpiod_set_value_cansleep(nt->reset_gpio, 0); 620 return 0; 621 } 622 623 static void nt35950_remove(struct mipi_dsi_device *dsi) 624 { 625 struct nt35950 *nt = mipi_dsi_get_drvdata(dsi); 626 int ret; 627 628 ret = mipi_dsi_detach(nt->dsi[0]); 629 if (ret < 0) 630 dev_err(&dsi->dev, 631 "Failed to detach from DSI0 host: %d\n", ret); 632 633 if (nt->dsi[1]) { 634 ret = mipi_dsi_detach(nt->dsi[1]); 635 if (ret < 0) 636 dev_err(&dsi->dev, 637 "Failed to detach from DSI1 host: %d\n", ret); 638 mipi_dsi_device_unregister(nt->dsi[1]); 639 } 640 641 drm_panel_remove(&nt->panel); 642 } 643 644 static const struct nt35950_panel_mode sharp_ls055d1sx04_modes[] = { 645 { 646 /* 1920x1080 60Hz no compression */ 647 .mode = { 648 .clock = 214537, 649 .hdisplay = 1080, 650 .hsync_start = 1080 + 400, 651 .hsync_end = 1080 + 400 + 40, 652 .htotal = 1080 + 400 + 40 + 300, 653 .vdisplay = 1920, 654 .vsync_start = 1920 + 12, 655 .vsync_end = 1920 + 12 + 2, 656 .vtotal = 1920 + 12 + 2 + 10, 657 .width_mm = 68, 658 .height_mm = 121, 659 }, 660 .compression = MCS_DATA_COMPRESSION_NONE, 661 .enable_sram = true, 662 .is_video_mode = false, 663 .scaler_on = 1, 664 .scaler_mode = MCS_SCALEUP_DUPLICATE, 665 }, 666 /* TODO: Add 2160x3840 60Hz when DSC is supported */ 667 }; 668 669 static const struct nt35950_panel_desc sharp_ls055d1sx04 = { 670 .model_name = "Sharp LS055D1SX04", 671 .dsi_info = { 672 .type = "LS055D1SX04", 673 .channel = 0, 674 .node = NULL, 675 }, 676 .mode_data = sharp_ls055d1sx04_modes, 677 .num_modes = ARRAY_SIZE(sharp_ls055d1sx04_modes), 678 .is_dual_dsi = true, 679 .num_lanes = 4, 680 }; 681 682 static const struct of_device_id nt35950_of_match[] = { 683 { .compatible = "sharp,ls055d1sx04", .data = &sharp_ls055d1sx04 }, 684 { } 685 }; 686 MODULE_DEVICE_TABLE(of, nt35950_of_match); 687 688 static struct mipi_dsi_driver nt35950_driver = { 689 .probe = nt35950_probe, 690 .remove = nt35950_remove, 691 .driver = { 692 .name = "panel-novatek-nt35950", 693 .of_match_table = nt35950_of_match, 694 }, 695 }; 696 module_mipi_dsi_driver(nt35950_driver); 697 698 MODULE_AUTHOR("AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>"); 699 MODULE_DESCRIPTION("Novatek NT35950 DriverIC panels driver"); 700 MODULE_LICENSE("GPL v2"); 701