1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Asia Better Technology Ltd. Y030XX067A IPS LCD panel driver
4  *
5  * Copyright (C) 2020, Paul Cercueil <paul@crapouillou.net>
6  * Copyright (C) 2020, Christophe Branchereau <cbranchereau@gmail.com>
7  */
8 
9 #include <linux/delay.h>
10 #include <linux/device.h>
11 #include <linux/gpio/consumer.h>
12 #include <linux/media-bus-format.h>
13 #include <linux/module.h>
14 #include <linux/of_device.h>
15 #include <linux/regmap.h>
16 #include <linux/regulator/consumer.h>
17 #include <linux/spi/spi.h>
18 
19 #include <drm/drm_modes.h>
20 #include <drm/drm_panel.h>
21 
22 #define REG00_VBRT_CTRL(val)		(val)
23 
24 #define REG01_COM_DC(val)		(val)
25 
26 #define REG02_DA_CONTRAST(val)		(val)
27 #define REG02_VESA_SEL(val)		((val) << 5)
28 #define REG02_COMDC_SW			BIT(7)
29 
30 #define REG03_VPOSITION(val)		(val)
31 #define REG03_BSMOUNT			BIT(5)
32 #define REG03_COMTST			BIT(6)
33 #define REG03_HPOSITION1		BIT(7)
34 
35 #define REG04_HPOSITION1(val)		(val)
36 
37 #define REG05_CLIP			BIT(0)
38 #define REG05_NVM_VREFRESH		BIT(1)
39 #define REG05_SLFR			BIT(2)
40 #define REG05_SLBRCHARGE(val)		((val) << 3)
41 #define REG05_PRECHARGE_LEVEL(val)	((val) << 6)
42 
43 #define REG06_TEST5			BIT(0)
44 #define REG06_SLDWN			BIT(1)
45 #define REG06_SLRGT			BIT(2)
46 #define REG06_TEST2			BIT(3)
47 #define REG06_XPSAVE			BIT(4)
48 #define REG06_GAMMA_SEL(val)		((val) << 5)
49 #define REG06_NT			BIT(7)
50 
51 #define REG07_TEST1			BIT(0)
52 #define REG07_HDVD_POL			BIT(1)
53 #define REG07_CK_POL			BIT(2)
54 #define REG07_TEST3			BIT(3)
55 #define REG07_TEST4			BIT(4)
56 #define REG07_480_LINEMASK		BIT(5)
57 #define REG07_AMPTST(val)		((val) << 6)
58 
59 #define REG08_SLHRC(val)		(val)
60 #define REG08_CLOCK_DIV(val)		((val) << 2)
61 #define REG08_PANEL(val)		((val) << 5)
62 
63 #define REG09_SUB_BRIGHT_R(val)		(val)
64 #define REG09_NW_NB			BIT(6)
65 #define REG09_IPCON			BIT(7)
66 
67 #define REG0A_SUB_BRIGHT_B(val)		(val)
68 #define REG0A_PAIR			BIT(6)
69 #define REG0A_DE_SEL			BIT(7)
70 
71 #define REG0B_MBK_POSITION(val)		(val)
72 #define REG0B_HD_FREERUN		BIT(4)
73 #define REG0B_VD_FREERUN		BIT(5)
74 #define REG0B_YUV2BIN(val)		((val) << 6)
75 
76 #define REG0C_CONTRAST_R(val)		(val)
77 #define REG0C_DOUBLEREAD		BIT(7)
78 
79 #define REG0D_CONTRAST_G(val)		(val)
80 #define REG0D_RGB_YUV			BIT(7)
81 
82 #define REG0E_CONTRAST_B(val)		(val)
83 #define REG0E_PIXELCOLORDRIVE		BIT(7)
84 
85 #define REG0F_ASPECT			BIT(0)
86 #define REG0F_OVERSCAN(val)		((val) << 1)
87 #define REG0F_FRAMEWIDTH(val)		((val) << 3)
88 
89 #define REG10_BRIGHT(val)		(val)
90 
91 #define REG11_SIG_GAIN(val)		(val)
92 #define REG11_SIGC_CNTL			BIT(6)
93 #define REG11_SIGC_POL			BIT(7)
94 
95 #define REG12_COLOR(val)		(val)
96 #define REG12_PWCKSEL(val)		((val) << 6)
97 
98 #define REG13_4096LEVEL_CNTL(val)	(val)
99 #define REG13_SL4096(val)		((val) << 4)
100 #define REG13_LIMITER_CONTROL		BIT(7)
101 
102 #define REG14_PANEL_TEST(val)		(val)
103 
104 #define REG15_NVM_LINK0			BIT(0)
105 #define REG15_NVM_LINK1			BIT(1)
106 #define REG15_NVM_LINK2			BIT(2)
107 #define REG15_NVM_LINK3			BIT(3)
108 #define REG15_NVM_LINK4			BIT(4)
109 #define REG15_NVM_LINK5			BIT(5)
110 #define REG15_NVM_LINK6			BIT(6)
111 #define REG15_NVM_LINK7			BIT(7)
112 
113 struct y030xx067a_info {
114 	const struct drm_display_mode *display_modes;
115 	unsigned int num_modes;
116 	u16 width_mm, height_mm;
117 	u32 bus_format, bus_flags;
118 };
119 
120 struct y030xx067a {
121 	struct drm_panel panel;
122 	struct spi_device *spi;
123 	struct regmap *map;
124 
125 	const struct y030xx067a_info *panel_info;
126 
127 	struct regulator *supply;
128 	struct gpio_desc *reset_gpio;
129 };
130 
131 static inline struct y030xx067a *to_y030xx067a(struct drm_panel *panel)
132 {
133 	return container_of(panel, struct y030xx067a, panel);
134 }
135 
136 static const struct reg_sequence y030xx067a_init_sequence[] = {
137 	{ 0x00, REG00_VBRT_CTRL(0x7f) },
138 	{ 0x01, REG01_COM_DC(0x3c) },
139 	{ 0x02, REG02_VESA_SEL(0x3) | REG02_DA_CONTRAST(0x1f) },
140 	{ 0x03, REG03_VPOSITION(0x0a) },
141 	{ 0x04, REG04_HPOSITION1(0xd2) },
142 	{ 0x05, REG05_CLIP | REG05_NVM_VREFRESH | REG05_SLBRCHARGE(0x2) },
143 	{ 0x06, REG06_NT },
144 	{ 0x07, 0 },
145 	{ 0x08, REG08_PANEL(0x1) | REG08_CLOCK_DIV(0x2) },
146 	{ 0x09, REG09_SUB_BRIGHT_R(0x20) },
147 	{ 0x0a, REG0A_SUB_BRIGHT_B(0x20) },
148 	{ 0x0b, REG0B_HD_FREERUN | REG0B_VD_FREERUN },
149 	{ 0x0c, REG0C_CONTRAST_R(0x00) },
150 	{ 0x0d, REG0D_CONTRAST_G(0x00) },
151 	{ 0x0e, REG0E_CONTRAST_B(0x10) },
152 	{ 0x0f, 0 },
153 	{ 0x10, REG10_BRIGHT(0x7f) },
154 	{ 0x11, REG11_SIGC_CNTL | REG11_SIG_GAIN(0x3f) },
155 	{ 0x12, REG12_COLOR(0x20) | REG12_PWCKSEL(0x1) },
156 	{ 0x13, REG13_4096LEVEL_CNTL(0x8) },
157 	{ 0x14, 0 },
158 	{ 0x15, 0 },
159 };
160 
161 static int y030xx067a_prepare(struct drm_panel *panel)
162 {
163 	struct y030xx067a *priv = to_y030xx067a(panel);
164 	struct device *dev = &priv->spi->dev;
165 	int err;
166 
167 	err = regulator_enable(priv->supply);
168 	if (err) {
169 		dev_err(dev, "Failed to enable power supply: %d\n", err);
170 		return err;
171 	}
172 
173 	/* Reset the chip */
174 	gpiod_set_value_cansleep(priv->reset_gpio, 1);
175 	usleep_range(1000, 20000);
176 	gpiod_set_value_cansleep(priv->reset_gpio, 0);
177 	usleep_range(1000, 20000);
178 
179 	err = regmap_multi_reg_write(priv->map, y030xx067a_init_sequence,
180 				     ARRAY_SIZE(y030xx067a_init_sequence));
181 	if (err) {
182 		dev_err(dev, "Failed to init registers: %d\n", err);
183 		goto err_disable_regulator;
184 	}
185 
186 	return 0;
187 
188 err_disable_regulator:
189 	regulator_disable(priv->supply);
190 	return err;
191 }
192 
193 static int y030xx067a_unprepare(struct drm_panel *panel)
194 {
195 	struct y030xx067a *priv = to_y030xx067a(panel);
196 
197 	gpiod_set_value_cansleep(priv->reset_gpio, 1);
198 	regulator_disable(priv->supply);
199 
200 	return 0;
201 }
202 
203 static int y030xx067a_enable(struct drm_panel *panel)
204 {
205 	struct y030xx067a *priv = to_y030xx067a(panel);
206 
207 	regmap_set_bits(priv->map, 0x06, REG06_XPSAVE);
208 
209 	if (panel->backlight) {
210 		/* Wait for the picture to be ready before enabling backlight */
211 		msleep(120);
212 	}
213 
214 	return 0;
215 }
216 
217 static int y030xx067a_disable(struct drm_panel *panel)
218 {
219 	struct y030xx067a *priv = to_y030xx067a(panel);
220 
221 	regmap_clear_bits(priv->map, 0x06, REG06_XPSAVE);
222 
223 	return 0;
224 }
225 
226 static int y030xx067a_get_modes(struct drm_panel *panel,
227 				struct drm_connector *connector)
228 {
229 	struct y030xx067a *priv = to_y030xx067a(panel);
230 	const struct y030xx067a_info *panel_info = priv->panel_info;
231 	struct drm_display_mode *mode;
232 	unsigned int i;
233 
234 	for (i = 0; i < panel_info->num_modes; i++) {
235 		mode = drm_mode_duplicate(connector->dev,
236 					  &panel_info->display_modes[i]);
237 		if (!mode)
238 			return -ENOMEM;
239 
240 		drm_mode_set_name(mode);
241 
242 		mode->type = DRM_MODE_TYPE_DRIVER;
243 		if (panel_info->num_modes == 1)
244 			mode->type |= DRM_MODE_TYPE_PREFERRED;
245 
246 		drm_mode_probed_add(connector, mode);
247 	}
248 
249 	connector->display_info.bpc = 8;
250 	connector->display_info.width_mm = panel_info->width_mm;
251 	connector->display_info.height_mm = panel_info->height_mm;
252 
253 	drm_display_info_set_bus_formats(&connector->display_info,
254 					 &panel_info->bus_format, 1);
255 	connector->display_info.bus_flags = panel_info->bus_flags;
256 
257 	return panel_info->num_modes;
258 }
259 
260 static const struct drm_panel_funcs y030xx067a_funcs = {
261 	.prepare	= y030xx067a_prepare,
262 	.unprepare	= y030xx067a_unprepare,
263 	.enable		= y030xx067a_enable,
264 	.disable	= y030xx067a_disable,
265 	.get_modes	= y030xx067a_get_modes,
266 };
267 
268 static const struct regmap_config y030xx067a_regmap_config = {
269 	.reg_bits = 8,
270 	.val_bits = 8,
271 	.max_register = 0x15,
272 	.cache_type = REGCACHE_FLAT,
273 };
274 
275 static int y030xx067a_probe(struct spi_device *spi)
276 {
277 	struct device *dev = &spi->dev;
278 	struct y030xx067a *priv;
279 	int err;
280 
281 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
282 	if (!priv)
283 		return -ENOMEM;
284 
285 	priv->spi = spi;
286 	spi_set_drvdata(spi, priv);
287 
288 	priv->map = devm_regmap_init_spi(spi, &y030xx067a_regmap_config);
289 	if (IS_ERR(priv->map)) {
290 		dev_err(dev, "Unable to init regmap\n");
291 		return PTR_ERR(priv->map);
292 	}
293 
294 	priv->panel_info = of_device_get_match_data(dev);
295 	if (!priv->panel_info)
296 		return -EINVAL;
297 
298 	priv->supply = devm_regulator_get(dev, "power");
299 	if (IS_ERR(priv->supply))
300 		return dev_err_probe(dev, PTR_ERR(priv->supply),
301 				     "Failed to get power supply\n");
302 
303 	priv->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
304 	if (IS_ERR(priv->reset_gpio))
305 		return dev_err_probe(dev, PTR_ERR(priv->reset_gpio),
306 				     "Failed to get reset GPIO\n");
307 
308 	drm_panel_init(&priv->panel, dev, &y030xx067a_funcs,
309 		       DRM_MODE_CONNECTOR_DPI);
310 
311 	err = drm_panel_of_backlight(&priv->panel);
312 	if (err)
313 		return err;
314 
315 	drm_panel_add(&priv->panel);
316 
317 	return 0;
318 }
319 
320 static void y030xx067a_remove(struct spi_device *spi)
321 {
322 	struct y030xx067a *priv = spi_get_drvdata(spi);
323 
324 	drm_panel_remove(&priv->panel);
325 	drm_panel_disable(&priv->panel);
326 	drm_panel_unprepare(&priv->panel);
327 }
328 
329 static const struct drm_display_mode y030xx067a_modes[] = {
330 	{ /* 60 Hz */
331 		.clock = 14400,
332 		.hdisplay = 320,
333 		.hsync_start = 320 + 10,
334 		.hsync_end = 320 + 10 + 37,
335 		.htotal = 320 + 10 + 37 + 33,
336 		.vdisplay = 480,
337 		.vsync_start = 480 + 84,
338 		.vsync_end = 480 + 84 + 20,
339 		.vtotal = 480 + 84 + 20 + 16,
340 		.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
341 	},
342 	{ /* 50 Hz */
343 		.clock = 12000,
344 		.hdisplay = 320,
345 		.hsync_start = 320 + 10,
346 		.hsync_end = 320 + 10 + 37,
347 		.htotal = 320 + 10 + 37 + 33,
348 		.vdisplay = 480,
349 		.vsync_start = 480 + 84,
350 		.vsync_end = 480 + 84 + 20,
351 		.vtotal = 480 + 84 + 20 + 16,
352 		.flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC,
353 	},
354 };
355 
356 static const struct y030xx067a_info y030xx067a_info = {
357 	.display_modes = y030xx067a_modes,
358 	.num_modes = ARRAY_SIZE(y030xx067a_modes),
359 	.width_mm = 69,
360 	.height_mm = 51,
361 	.bus_format = MEDIA_BUS_FMT_RGB888_3X8_DELTA,
362 	.bus_flags = DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE | DRM_BUS_FLAG_DE_LOW,
363 };
364 
365 static const struct of_device_id y030xx067a_of_match[] = {
366 	{ .compatible = "abt,y030xx067a", .data = &y030xx067a_info },
367 	{ /* sentinel */ }
368 };
369 MODULE_DEVICE_TABLE(of, y030xx067a_of_match);
370 
371 static struct spi_driver y030xx067a_driver = {
372 	.driver = {
373 		.name = "abt-y030xx067a",
374 		.of_match_table = y030xx067a_of_match,
375 	},
376 	.probe = y030xx067a_probe,
377 	.remove = y030xx067a_remove,
378 };
379 module_spi_driver(y030xx067a_driver);
380 
381 MODULE_AUTHOR("Paul Cercueil <paul@crapouillou.net>");
382 MODULE_AUTHOR("Christophe Branchereau <cbranchereau@gmail.com>");
383 MODULE_LICENSE("GPL v2");
384