xref: /openbmc/linux/drivers/gpu/drm/panel/Kconfig (revision f97769fd)
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ARM_VERSATILE
12	tristate "ARM Versatile panel driver"
13	depends on OF
14	depends on MFD_SYSCON
15	select VIDEOMODE_HELPERS
16	help
17	  This driver supports the ARM Versatile panels connected to ARM
18	  reference designs. The panel is detected using special registers
19	  in the Versatile family syscon registers.
20
21config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
22	tristate "ASUS Z00T TM5P5 NT35596 panel"
23	depends on GPIOLIB && OF
24	depends on DRM_MIPI_DSI
25	depends on BACKLIGHT_CLASS_DEVICE
26	help
27	  Say Y here if you want to enable support for the ASUS TMP5P5
28	  NT35596 1080x1920 video mode panel as found in some Asus
29	  Zenfone 2 Laser Z00T devices.
30
31config DRM_PANEL_BOE_HIMAX8279D
32	tristate "Boe Himax8279d panel"
33	depends on OF
34	depends on DRM_MIPI_DSI
35	depends on BACKLIGHT_CLASS_DEVICE
36	help
37	  Say Y here if you want to enable support for Boe Himax8279d
38	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
39	  24 bit RGB per pixel. It provides a MIPI DSI interface to
40	  the host and has a built-in LED backlight.
41
42config DRM_PANEL_BOE_TV101WUM_NL6
43	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
44	depends on OF
45	depends on DRM_MIPI_DSI
46	depends on BACKLIGHT_CLASS_DEVICE
47	help
48	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
49	  45NA WUXGA PANEL DSI Video Mode panel
50
51config DRM_PANEL_LVDS
52	tristate "Generic LVDS panel driver"
53	depends on OF
54	depends on BACKLIGHT_CLASS_DEVICE
55	select VIDEOMODE_HELPERS
56	help
57	  This driver supports LVDS panels that don't require device-specific
58	  handling of power supplies or control signals. It implements automatic
59	  backlight handling if the panel is attached to a backlight controller.
60
61config DRM_PANEL_SIMPLE
62	tristate "support for simple panels"
63	depends on OF
64	depends on BACKLIGHT_CLASS_DEVICE
65	select VIDEOMODE_HELPERS
66	help
67	  DRM panel driver for dumb panels that need at most a regulator and
68	  a GPIO to be powered up. Optionally a backlight can be attached so
69	  that it can be automatically turned off when the panel goes into a
70	  low power state.
71
72config DRM_PANEL_ELIDA_KD35T133
73	tristate "Elida KD35T133 panel driver"
74	depends on OF
75	depends on DRM_MIPI_DSI
76	depends on BACKLIGHT_CLASS_DEVICE
77	help
78	  Say Y here if you want to enable support for the Elida
79	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
80	  system interfaces.
81
82config DRM_PANEL_FEIXIN_K101_IM2BA02
83	tristate "Feixin K101 IM2BA02 panel"
84	depends on OF
85	depends on DRM_MIPI_DSI
86	depends on BACKLIGHT_CLASS_DEVICE
87	help
88	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
89	  4-lane 800x1280 MIPI DSI panel.
90
91config DRM_PANEL_FEIYANG_FY07024DI26A30D
92	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
93	depends on OF
94	depends on DRM_MIPI_DSI
95	depends on BACKLIGHT_CLASS_DEVICE
96	help
97	  Say Y if you want to enable support for panels based on the
98	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
99
100config DRM_PANEL_ILITEK_IL9322
101	tristate "Ilitek ILI9322 320x240 QVGA panels"
102	depends on OF && SPI
103	select REGMAP
104	help
105	  Say Y here if you want to enable support for Ilitek IL9322
106	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
107
108config DRM_PANEL_ILITEK_ILI9881C
109	tristate "Ilitek ILI9881C-based panels"
110	depends on OF
111	depends on DRM_MIPI_DSI
112	depends on BACKLIGHT_CLASS_DEVICE
113	help
114	  Say Y if you want to enable support for panels based on the
115	  Ilitek ILI9881c controller.
116
117config DRM_PANEL_INNOLUX_P079ZCA
118	tristate "Innolux P079ZCA panel"
119	depends on OF
120	depends on DRM_MIPI_DSI
121	depends on BACKLIGHT_CLASS_DEVICE
122	help
123	  Say Y here if you want to enable support for Innolux P079ZCA
124	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
125	  24 bit RGB per pixel. It provides a MIPI DSI interface to
126	  the host and has a built-in LED backlight.
127
128config DRM_PANEL_JDI_LT070ME05000
129	tristate "JDI LT070ME05000 WUXGA DSI panel"
130	depends on OF
131	depends on DRM_MIPI_DSI
132	depends on BACKLIGHT_CLASS_DEVICE
133	help
134	  Say Y here if you want to enable support for JDI DSI video mode
135	  panel as found in Google Nexus 7 (2013) devices.
136	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
137	  24 bit per pixel.
138
139config DRM_PANEL_KINGDISPLAY_KD097D04
140	tristate "Kingdisplay kd097d04 panel"
141	depends on OF
142	depends on DRM_MIPI_DSI
143	depends on BACKLIGHT_CLASS_DEVICE
144	help
145	  Say Y here if you want to enable support for Kingdisplay kd097d04
146	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
147	  24 bit RGB per pixel. It provides a MIPI DSI interface to
148	  the host and has a built-in LED backlight.
149
150config DRM_PANEL_LEADTEK_LTK050H3146W
151	tristate "Leadtek LTK050H3146W panel"
152	depends on OF
153	depends on DRM_MIPI_DSI
154	depends on BACKLIGHT_CLASS_DEVICE
155	help
156	  Say Y here if you want to enable support for Leadtek LTK050H3146W
157	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
158	  24 bit RGB per pixel. It provides a MIPI DSI interface to
159	  the host and has a built-in LED backlight.
160
161config DRM_PANEL_LEADTEK_LTK500HD1829
162	tristate "Leadtek LTK500HD1829 panel"
163	depends on OF
164	depends on DRM_MIPI_DSI
165	depends on BACKLIGHT_CLASS_DEVICE
166	help
167	  Say Y here if you want to enable support for Kingdisplay kd097d04
168	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
169	  24 bit RGB per pixel. It provides a MIPI DSI interface to
170	  the host and has a built-in LED backlight.
171
172config DRM_PANEL_SAMSUNG_LD9040
173	tristate "Samsung LD9040 RGB/SPI panel"
174	depends on OF && SPI
175	select VIDEOMODE_HELPERS
176
177config DRM_PANEL_LG_LB035Q02
178	tristate "LG LB035Q024573 RGB panel"
179	depends on GPIOLIB && OF && SPI
180	help
181	  Say Y here if you want to enable support for the LB035Q02 RGB panel
182	  (found on the Gumstix Overo Palo35 board). To compile this driver as
183	  a module, choose M here.
184
185config DRM_PANEL_LG_LG4573
186	tristate "LG4573 RGB/SPI panel"
187	depends on OF && SPI
188	select VIDEOMODE_HELPERS
189	help
190	  Say Y here if you want to enable support for LG4573 RGB panel.
191	  To compile this driver as a module, choose M here.
192
193config DRM_PANEL_NEC_NL8048HL11
194	tristate "NEC NL8048HL11 RGB panel"
195	depends on GPIOLIB && OF && SPI
196	help
197	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
198	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
199	  as a module, choose M here.
200
201config DRM_PANEL_NOVATEK_NT35510
202	tristate "Novatek NT35510 RGB panel driver"
203	depends on OF
204	depends on DRM_MIPI_DSI
205	depends on BACKLIGHT_CLASS_DEVICE
206	help
207	  Say Y here if you want to enable support for the panels built
208	  around the Novatek NT35510 display controller, such as some
209	  Hydis panels.
210
211config DRM_PANEL_NOVATEK_NT39016
212	tristate "Novatek NT39016 RGB/SPI panel"
213	depends on OF && SPI
214	depends on BACKLIGHT_CLASS_DEVICE
215	select REGMAP_SPI
216	help
217	  Say Y here if you want to enable support for the panels built
218	  around the Novatek NT39016 display controller.
219
220config DRM_PANEL_OLIMEX_LCD_OLINUXINO
221	tristate "Olimex LCD-OLinuXino panel"
222	depends on OF
223	depends on I2C
224	depends on BACKLIGHT_CLASS_DEVICE
225	help
226	  The panel is used with different sizes LCDs, from 480x272 to
227	  1280x800, and 24 bit per pixel.
228
229	  Say Y here if you want to enable support for Olimex Ltd.
230	  LCD-OLinuXino panel.
231
232config DRM_PANEL_ORISETECH_OTM8009A
233	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
234	depends on OF
235	depends on DRM_MIPI_DSI
236	depends on BACKLIGHT_CLASS_DEVICE
237	help
238	  Say Y here if you want to enable support for Orise Technology
239	  otm8009a 480x800 dsi 2dl panel.
240
241config DRM_PANEL_OSD_OSD101T2587_53TS
242	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
243	depends on OF
244	depends on DRM_MIPI_DSI
245	depends on BACKLIGHT_CLASS_DEVICE
246	help
247	  Say Y here if you want to enable support for One Stop Displays
248	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
249
250config DRM_PANEL_PANASONIC_VVX10F034N00
251	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
252	depends on OF
253	depends on DRM_MIPI_DSI
254	depends on BACKLIGHT_CLASS_DEVICE
255	help
256	  Say Y here if you want to enable support for Panasonic VVX10F034N00
257	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
258	  Xperia Z2 tablets
259
260config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
261	tristate "Raspberry Pi 7-inch touchscreen panel"
262	depends on DRM_MIPI_DSI
263	help
264	  Say Y here if you want to enable support for the Raspberry
265	  Pi 7" Touchscreen.  To compile this driver as a module,
266	  choose M here.
267
268config DRM_PANEL_RAYDIUM_RM67191
269	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
270	depends on OF
271	depends on DRM_MIPI_DSI
272	depends on BACKLIGHT_CLASS_DEVICE
273	help
274	  Say Y here if you want to enable support for Raydium RM67191 FHD
275	  (1080x1920) DSI panel.
276
277config DRM_PANEL_RAYDIUM_RM68200
278	tristate "Raydium RM68200 720x1280 DSI video mode panel"
279	depends on OF
280	depends on DRM_MIPI_DSI
281	depends on BACKLIGHT_CLASS_DEVICE
282	help
283	  Say Y here if you want to enable support for Raydium RM68200
284	  720x1280 DSI video mode panel.
285
286config DRM_PANEL_RONBO_RB070D30
287	tristate "Ronbo Electronics RB070D30 panel"
288	depends on OF
289	depends on DRM_MIPI_DSI
290	depends on BACKLIGHT_CLASS_DEVICE
291	help
292	  Say Y here if you want to enable support for Ronbo Electronics
293	  RB070D30 1024x600 DSI panel.
294
295config DRM_PANEL_SAMSUNG_S6D16D0
296	tristate "Samsung S6D16D0 DSI video mode panel"
297	depends on OF
298	depends on DRM_MIPI_DSI
299	select VIDEOMODE_HELPERS
300
301config DRM_PANEL_SAMSUNG_S6E3HA2
302	tristate "Samsung S6E3HA2 DSI video mode panel"
303	depends on OF
304	depends on DRM_MIPI_DSI
305	depends on BACKLIGHT_CLASS_DEVICE
306	select VIDEOMODE_HELPERS
307
308config DRM_PANEL_SAMSUNG_S6E63J0X03
309	tristate "Samsung S6E63J0X03 DSI command mode panel"
310	depends on OF
311	depends on DRM_MIPI_DSI
312	depends on BACKLIGHT_CLASS_DEVICE
313	select VIDEOMODE_HELPERS
314
315config DRM_PANEL_SAMSUNG_S6E63M0
316	tristate "Samsung S6E63M0 RGB/SPI panel"
317	depends on OF
318	depends on SPI
319	depends on BACKLIGHT_CLASS_DEVICE
320	help
321	  Say Y here if you want to enable support for Samsung S6E63M0
322	  AMOLED LCD panel.
323
324config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
325	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
326	depends on OF
327	select DRM_MIPI_DSI
328	select VIDEOMODE_HELPERS
329
330config DRM_PANEL_SAMSUNG_S6E8AA0
331	tristate "Samsung S6E8AA0 DSI video mode panel"
332	depends on OF
333	select DRM_MIPI_DSI
334	select VIDEOMODE_HELPERS
335
336config DRM_PANEL_SEIKO_43WVF1G
337	tristate "Seiko 43WVF1G panel"
338	depends on OF
339	depends on BACKLIGHT_CLASS_DEVICE
340	select VIDEOMODE_HELPERS
341	help
342	  Say Y here if you want to enable support for the Seiko
343	  43WVF1G controller for 800x480 LCD panels
344
345config DRM_PANEL_SHARP_LQ101R1SX01
346	tristate "Sharp LQ101R1SX01 panel"
347	depends on OF
348	depends on DRM_MIPI_DSI
349	depends on BACKLIGHT_CLASS_DEVICE
350	help
351	  Say Y here if you want to enable support for Sharp LQ101R1SX01
352	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
353	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
354	  the host and has a built-in LED backlight.
355
356	  To compile this driver as a module, choose M here: the module
357	  will be called panel-sharp-lq101r1sx01.
358
359config DRM_PANEL_SHARP_LS037V7DW01
360	tristate "Sharp LS037V7DW01 VGA LCD panel"
361	depends on GPIOLIB && OF && REGULATOR
362	help
363	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
364	  (480x640) LCD panel (found on the TI SDP3430 board).
365
366config DRM_PANEL_SHARP_LS043T1LE01
367	tristate "Sharp LS043T1LE01 qHD video mode panel"
368	depends on OF
369	depends on DRM_MIPI_DSI
370	depends on BACKLIGHT_CLASS_DEVICE
371	help
372	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
373	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
374
375config DRM_PANEL_SITRONIX_ST7701
376	tristate "Sitronix ST7701 panel driver"
377	depends on OF
378	depends on DRM_MIPI_DSI
379	depends on BACKLIGHT_CLASS_DEVICE
380	help
381	  Say Y here if you want to enable support for the Sitronix
382	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
383	  system interfaces.
384
385config DRM_PANEL_SITRONIX_ST7703
386	tristate "Sitronix ST7703 based MIPI touchscreen panels"
387	depends on OF
388	depends on DRM_MIPI_DSI
389	depends on BACKLIGHT_CLASS_DEVICE
390	help
391	  Say Y here if you want to enable support for Sitronix ST7703 based
392	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
393	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
394	  in backlight and touch controller.
395	  Touch input support is provided by the goodix driver and needs to be
396	  selected separately.
397
398config DRM_PANEL_SITRONIX_ST7789V
399	tristate "Sitronix ST7789V panel"
400	depends on OF && SPI
401	depends on BACKLIGHT_CLASS_DEVICE
402	help
403	  Say Y here if you want to enable support for the Sitronix
404	  ST7789V controller for 240x320 LCD panels
405
406config DRM_PANEL_SONY_ACX424AKP
407	tristate "Sony ACX424AKP DSI command mode panel"
408	depends on OF
409	depends on DRM_MIPI_DSI
410	depends on BACKLIGHT_CLASS_DEVICE
411	select VIDEOMODE_HELPERS
412	help
413	  Say Y here if you want to enable the Sony ACX424 display
414	  panel. This panel supports DSI in both command and video
415	  mode.
416
417config DRM_PANEL_SONY_ACX565AKM
418	tristate "Sony ACX565AKM panel"
419	depends on GPIOLIB && OF && SPI
420	depends on BACKLIGHT_CLASS_DEVICE
421	help
422	  Say Y here if you want to enable support for the Sony ACX565AKM
423	  800x600 3.5" panel (found on the Nokia N900).
424
425config DRM_PANEL_TPO_TD028TTEC1
426	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
427	depends on OF && SPI
428	depends on BACKLIGHT_CLASS_DEVICE
429	help
430	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
431	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
432
433config DRM_PANEL_TPO_TD043MTEA1
434	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
435	depends on GPIOLIB && OF && REGULATOR && SPI
436	help
437	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
438	  4.3" panel (found on the OMAP3 Pandora board).
439
440config DRM_PANEL_TPO_TPG110
441	tristate "TPO TPG 800x400 panel"
442	depends on OF && SPI && GPIOLIB
443	depends on BACKLIGHT_CLASS_DEVICE
444	help
445	  Say Y here if you want to enable support for TPO TPG110
446	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
447	  800x400 LCD panels.
448
449config DRM_PANEL_TRULY_NT35597_WQXGA
450	tristate "Truly WQXGA"
451	depends on OF
452	depends on DRM_MIPI_DSI
453	help
454	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
455	  Video Mode panel
456
457config DRM_PANEL_VISIONOX_RM69299
458	tristate "Visionox RM69299"
459	depends on OF
460	depends on DRM_MIPI_DSI
461	help
462	  Say Y here if you want to enable support for Visionox
463	  RM69299  DSI Video Mode panel.
464
465config DRM_PANEL_XINPENG_XPP055C272
466	tristate "Xinpeng XPP055C272 panel driver"
467	depends on OF
468	depends on DRM_MIPI_DSI
469	depends on BACKLIGHT_CLASS_DEVICE
470	help
471	  Say Y here if you want to enable support for the Xinpeng
472	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
473	  system interfaces.
474endmenu
475