1# SPDX-License-Identifier: GPL-2.0-only 2config DRM_PANEL 3 bool 4 depends on DRM 5 help 6 Panel registration and lookup framework. 7 8menu "Display Panels" 9 depends on DRM && DRM_PANEL 10 11config DRM_PANEL_ARM_VERSATILE 12 tristate "ARM Versatile panel driver" 13 depends on OF 14 depends on MFD_SYSCON 15 select VIDEOMODE_HELPERS 16 help 17 This driver supports the ARM Versatile panels connected to ARM 18 reference designs. The panel is detected using special registers 19 in the Versatile family syscon registers. 20 21config DRM_PANEL_BOE_HIMAX8279D 22 tristate "Boe Himax8279d panel" 23 depends on OF 24 depends on DRM_MIPI_DSI 25 depends on BACKLIGHT_CLASS_DEVICE 26 help 27 Say Y here if you want to enable support for Boe Himax8279d 28 TFT-LCD modules. The panel has a 1200x1920 resolution and uses 29 24 bit RGB per pixel. It provides a MIPI DSI interface to 30 the host and has a built-in LED backlight. 31 32config DRM_PANEL_BOE_TV101WUM_NL6 33 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" 34 depends on OF 35 depends on DRM_MIPI_DSI 36 depends on BACKLIGHT_CLASS_DEVICE 37 help 38 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 39 45NA WUXGA PANEL DSI Video Mode panel 40 41config DRM_PANEL_LVDS 42 tristate "Generic LVDS panel driver" 43 depends on OF 44 depends on BACKLIGHT_CLASS_DEVICE 45 select VIDEOMODE_HELPERS 46 help 47 This driver supports LVDS panels that don't require device-specific 48 handling of power supplies or control signals. It implements automatic 49 backlight handling if the panel is attached to a backlight controller. 50 51config DRM_PANEL_SIMPLE 52 tristate "support for simple panels" 53 depends on OF 54 depends on BACKLIGHT_CLASS_DEVICE 55 select VIDEOMODE_HELPERS 56 help 57 DRM panel driver for dumb panels that need at most a regulator and 58 a GPIO to be powered up. Optionally a backlight can be attached so 59 that it can be automatically turned off when the panel goes into a 60 low power state. 61 62config DRM_PANEL_ELIDA_KD35T133 63 tristate "Elida KD35T133 panel driver" 64 depends on OF 65 depends on DRM_MIPI_DSI 66 depends on BACKLIGHT_CLASS_DEVICE 67 help 68 Say Y here if you want to enable support for the Elida 69 KD35T133 controller for 320x480 LCD panels with MIPI-DSI 70 system interfaces. 71 72config DRM_PANEL_FEIXIN_K101_IM2BA02 73 tristate "Feixin K101 IM2BA02 panel" 74 depends on OF 75 depends on DRM_MIPI_DSI 76 depends on BACKLIGHT_CLASS_DEVICE 77 help 78 Say Y here if you want to enable support for the Feixin K101 IM2BA02 79 4-lane 800x1280 MIPI DSI panel. 80 81config DRM_PANEL_FEIYANG_FY07024DI26A30D 82 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" 83 depends on OF 84 depends on DRM_MIPI_DSI 85 depends on BACKLIGHT_CLASS_DEVICE 86 help 87 Say Y if you want to enable support for panels based on the 88 Feiyang FY07024DI26A30-D MIPI-DSI interface. 89 90config DRM_PANEL_ILITEK_IL9322 91 tristate "Ilitek ILI9322 320x240 QVGA panels" 92 depends on OF && SPI 93 select REGMAP 94 help 95 Say Y here if you want to enable support for Ilitek IL9322 96 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. 97 98config DRM_PANEL_ILITEK_ILI9881C 99 tristate "Ilitek ILI9881C-based panels" 100 depends on OF 101 depends on DRM_MIPI_DSI 102 depends on BACKLIGHT_CLASS_DEVICE 103 help 104 Say Y if you want to enable support for panels based on the 105 Ilitek ILI9881c controller. 106 107config DRM_PANEL_INNOLUX_P079ZCA 108 tristate "Innolux P079ZCA panel" 109 depends on OF 110 depends on DRM_MIPI_DSI 111 depends on BACKLIGHT_CLASS_DEVICE 112 help 113 Say Y here if you want to enable support for Innolux P079ZCA 114 TFT-LCD modules. The panel has a 1024x768 resolution and uses 115 24 bit RGB per pixel. It provides a MIPI DSI interface to 116 the host and has a built-in LED backlight. 117 118config DRM_PANEL_JDI_LT070ME05000 119 tristate "JDI LT070ME05000 WUXGA DSI panel" 120 depends on OF 121 depends on DRM_MIPI_DSI 122 depends on BACKLIGHT_CLASS_DEVICE 123 help 124 Say Y here if you want to enable support for JDI DSI video mode 125 panel as found in Google Nexus 7 (2013) devices. 126 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 127 24 bit per pixel. 128 129config DRM_PANEL_KINGDISPLAY_KD097D04 130 tristate "Kingdisplay kd097d04 panel" 131 depends on OF 132 depends on DRM_MIPI_DSI 133 depends on BACKLIGHT_CLASS_DEVICE 134 help 135 Say Y here if you want to enable support for Kingdisplay kd097d04 136 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 137 24 bit RGB per pixel. It provides a MIPI DSI interface to 138 the host and has a built-in LED backlight. 139 140config DRM_PANEL_LEADTEK_LTK500HD1829 141 tristate "Leadtek LTK500HD1829 panel" 142 depends on OF 143 depends on DRM_MIPI_DSI 144 depends on BACKLIGHT_CLASS_DEVICE 145 help 146 Say Y here if you want to enable support for Kingdisplay kd097d04 147 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 148 24 bit RGB per pixel. It provides a MIPI DSI interface to 149 the host and has a built-in LED backlight. 150 151config DRM_PANEL_SAMSUNG_LD9040 152 tristate "Samsung LD9040 RGB/SPI panel" 153 depends on OF && SPI 154 select VIDEOMODE_HELPERS 155 156config DRM_PANEL_LG_LB035Q02 157 tristate "LG LB035Q024573 RGB panel" 158 depends on GPIOLIB && OF && SPI 159 help 160 Say Y here if you want to enable support for the LB035Q02 RGB panel 161 (found on the Gumstix Overo Palo35 board). To compile this driver as 162 a module, choose M here. 163 164config DRM_PANEL_LG_LG4573 165 tristate "LG4573 RGB/SPI panel" 166 depends on OF && SPI 167 select VIDEOMODE_HELPERS 168 help 169 Say Y here if you want to enable support for LG4573 RGB panel. 170 To compile this driver as a module, choose M here. 171 172config DRM_PANEL_NEC_NL8048HL11 173 tristate "NEC NL8048HL11 RGB panel" 174 depends on GPIOLIB && OF && SPI 175 help 176 Say Y here if you want to enable support for the NEC NL8048HL11 RGB 177 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver 178 as a module, choose M here. 179 180config DRM_PANEL_NOVATEK_NT35510 181 tristate "Novatek NT35510 RGB panel driver" 182 depends on OF 183 depends on DRM_MIPI_DSI 184 depends on BACKLIGHT_CLASS_DEVICE 185 help 186 Say Y here if you want to enable support for the panels built 187 around the Novatek NT35510 display controller, such as some 188 Hydis panels. 189 190config DRM_PANEL_NOVATEK_NT39016 191 tristate "Novatek NT39016 RGB/SPI panel" 192 depends on OF && SPI 193 depends on BACKLIGHT_CLASS_DEVICE 194 select REGMAP_SPI 195 help 196 Say Y here if you want to enable support for the panels built 197 around the Novatek NT39016 display controller. 198 199config DRM_PANEL_OLIMEX_LCD_OLINUXINO 200 tristate "Olimex LCD-OLinuXino panel" 201 depends on OF 202 depends on I2C 203 depends on BACKLIGHT_CLASS_DEVICE 204 help 205 The panel is used with different sizes LCDs, from 480x272 to 206 1280x800, and 24 bit per pixel. 207 208 Say Y here if you want to enable support for Olimex Ltd. 209 LCD-OLinuXino panel. 210 211config DRM_PANEL_ORISETECH_OTM8009A 212 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" 213 depends on OF 214 depends on DRM_MIPI_DSI 215 depends on BACKLIGHT_CLASS_DEVICE 216 help 217 Say Y here if you want to enable support for Orise Technology 218 otm8009a 480x800 dsi 2dl panel. 219 220config DRM_PANEL_OSD_OSD101T2587_53TS 221 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" 222 depends on OF 223 depends on DRM_MIPI_DSI 224 depends on BACKLIGHT_CLASS_DEVICE 225 help 226 Say Y here if you want to enable support for One Stop Displays 227 OSD101T2587-53TS 10.1" 1920x1200 dsi panel. 228 229config DRM_PANEL_PANASONIC_VVX10F034N00 230 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" 231 depends on OF 232 depends on DRM_MIPI_DSI 233 depends on BACKLIGHT_CLASS_DEVICE 234 help 235 Say Y here if you want to enable support for Panasonic VVX10F034N00 236 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some 237 Xperia Z2 tablets 238 239config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN 240 tristate "Raspberry Pi 7-inch touchscreen panel" 241 depends on DRM_MIPI_DSI 242 help 243 Say Y here if you want to enable support for the Raspberry 244 Pi 7" Touchscreen. To compile this driver as a module, 245 choose M here. 246 247config DRM_PANEL_RAYDIUM_RM67191 248 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" 249 depends on OF 250 depends on DRM_MIPI_DSI 251 depends on BACKLIGHT_CLASS_DEVICE 252 help 253 Say Y here if you want to enable support for Raydium RM67191 FHD 254 (1080x1920) DSI panel. 255 256config DRM_PANEL_RAYDIUM_RM68200 257 tristate "Raydium RM68200 720x1280 DSI video mode panel" 258 depends on OF 259 depends on DRM_MIPI_DSI 260 depends on BACKLIGHT_CLASS_DEVICE 261 help 262 Say Y here if you want to enable support for Raydium RM68200 263 720x1280 DSI video mode panel. 264 265config DRM_PANEL_ROCKTECH_JH057N00900 266 tristate "Rocktech JH057N00900 MIPI touchscreen panel" 267 depends on OF 268 depends on DRM_MIPI_DSI 269 depends on BACKLIGHT_CLASS_DEVICE 270 help 271 Say Y here if you want to enable support for Rocktech JH057N00900 272 MIPI DSI panel as e.g. used in the Librem 5 devkit. It has a 273 resolution of 720x1440 pixels, a built in backlight and touch 274 controller. 275 Touch input support is provided by the goodix driver and needs to be 276 selected separately. 277 278config DRM_PANEL_RONBO_RB070D30 279 tristate "Ronbo Electronics RB070D30 panel" 280 depends on OF 281 depends on DRM_MIPI_DSI 282 depends on BACKLIGHT_CLASS_DEVICE 283 help 284 Say Y here if you want to enable support for Ronbo Electronics 285 RB070D30 1024x600 DSI panel. 286 287config DRM_PANEL_SAMSUNG_S6D16D0 288 tristate "Samsung S6D16D0 DSI video mode panel" 289 depends on OF 290 depends on DRM_MIPI_DSI 291 select VIDEOMODE_HELPERS 292 293config DRM_PANEL_SAMSUNG_S6E3HA2 294 tristate "Samsung S6E3HA2 DSI video mode panel" 295 depends on OF 296 depends on DRM_MIPI_DSI 297 depends on BACKLIGHT_CLASS_DEVICE 298 select VIDEOMODE_HELPERS 299 300config DRM_PANEL_SAMSUNG_S6E63J0X03 301 tristate "Samsung S6E63J0X03 DSI command mode panel" 302 depends on OF 303 depends on DRM_MIPI_DSI 304 depends on BACKLIGHT_CLASS_DEVICE 305 select VIDEOMODE_HELPERS 306 307config DRM_PANEL_SAMSUNG_S6E63M0 308 tristate "Samsung S6E63M0 RGB/SPI panel" 309 depends on OF 310 depends on SPI 311 depends on BACKLIGHT_CLASS_DEVICE 312 help 313 Say Y here if you want to enable support for Samsung S6E63M0 314 AMOLED LCD panel. 315 316config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 317 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" 318 depends on OF 319 select DRM_MIPI_DSI 320 select VIDEOMODE_HELPERS 321 322config DRM_PANEL_SAMSUNG_S6E8AA0 323 tristate "Samsung S6E8AA0 DSI video mode panel" 324 depends on OF 325 select DRM_MIPI_DSI 326 select VIDEOMODE_HELPERS 327 328config DRM_PANEL_SEIKO_43WVF1G 329 tristate "Seiko 43WVF1G panel" 330 depends on OF 331 depends on BACKLIGHT_CLASS_DEVICE 332 select VIDEOMODE_HELPERS 333 help 334 Say Y here if you want to enable support for the Seiko 335 43WVF1G controller for 800x480 LCD panels 336 337config DRM_PANEL_SHARP_LQ101R1SX01 338 tristate "Sharp LQ101R1SX01 panel" 339 depends on OF 340 depends on DRM_MIPI_DSI 341 depends on BACKLIGHT_CLASS_DEVICE 342 help 343 Say Y here if you want to enable support for Sharp LQ101R1SX01 344 TFT-LCD modules. The panel has a 2560x1600 resolution and uses 345 24 bit RGB per pixel. It provides a dual MIPI DSI interface to 346 the host and has a built-in LED backlight. 347 348 To compile this driver as a module, choose M here: the module 349 will be called panel-sharp-lq101r1sx01. 350 351config DRM_PANEL_SHARP_LS037V7DW01 352 tristate "Sharp LS037V7DW01 VGA LCD panel" 353 depends on GPIOLIB && OF && REGULATOR 354 help 355 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA 356 (480x640) LCD panel (found on the TI SDP3430 board). 357 358config DRM_PANEL_SHARP_LS043T1LE01 359 tristate "Sharp LS043T1LE01 qHD video mode panel" 360 depends on OF 361 depends on DRM_MIPI_DSI 362 depends on BACKLIGHT_CLASS_DEVICE 363 help 364 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD 365 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard 366 367config DRM_PANEL_SITRONIX_ST7701 368 tristate "Sitronix ST7701 panel driver" 369 depends on OF 370 depends on DRM_MIPI_DSI 371 depends on BACKLIGHT_CLASS_DEVICE 372 help 373 Say Y here if you want to enable support for the Sitronix 374 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI 375 system interfaces. 376 377config DRM_PANEL_SITRONIX_ST7789V 378 tristate "Sitronix ST7789V panel" 379 depends on OF && SPI 380 depends on BACKLIGHT_CLASS_DEVICE 381 help 382 Say Y here if you want to enable support for the Sitronix 383 ST7789V controller for 240x320 LCD panels 384 385config DRM_PANEL_SONY_ACX424AKP 386 tristate "Sony ACX424AKP DSI command mode panel" 387 depends on OF 388 depends on DRM_MIPI_DSI 389 depends on BACKLIGHT_CLASS_DEVICE 390 select VIDEOMODE_HELPERS 391 help 392 Say Y here if you want to enable the Sony ACX424 display 393 panel. This panel supports DSI in both command and video 394 mode. 395 396config DRM_PANEL_SONY_ACX565AKM 397 tristate "Sony ACX565AKM panel" 398 depends on GPIOLIB && OF && SPI 399 depends on BACKLIGHT_CLASS_DEVICE 400 help 401 Say Y here if you want to enable support for the Sony ACX565AKM 402 800x600 3.5" panel (found on the Nokia N900). 403 404config DRM_PANEL_TPO_TD028TTEC1 405 tristate "Toppoly (TPO) TD028TTEC1 panel driver" 406 depends on OF && SPI 407 depends on BACKLIGHT_CLASS_DEVICE 408 help 409 Say Y here if you want to enable support for TPO TD028TTEC1 480x640 410 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973). 411 412config DRM_PANEL_TPO_TD043MTEA1 413 tristate "Toppoly (TPO) TD043MTEA1 panel driver" 414 depends on GPIOLIB && OF && REGULATOR && SPI 415 help 416 Say Y here if you want to enable support for TPO TD043MTEA1 800x480 417 4.3" panel (found on the OMAP3 Pandora board). 418 419config DRM_PANEL_TPO_TPG110 420 tristate "TPO TPG 800x400 panel" 421 depends on OF && SPI && GPIOLIB 422 depends on BACKLIGHT_CLASS_DEVICE 423 help 424 Say Y here if you want to enable support for TPO TPG110 425 400CH LTPS TFT LCD Single Chip Digital Driver for up to 426 800x400 LCD panels. 427 428config DRM_PANEL_TRULY_NT35597_WQXGA 429 tristate "Truly WQXGA" 430 depends on OF 431 depends on DRM_MIPI_DSI 432 help 433 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI 434 Video Mode panel 435 436config DRM_PANEL_XINPENG_XPP055C272 437 tristate "Xinpeng XPP055C272 panel driver" 438 depends on OF 439 depends on DRM_MIPI_DSI 440 depends on BACKLIGHT_CLASS_DEVICE 441 help 442 Say Y here if you want to enable support for the Xinpeng 443 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI 444 system interfaces. 445endmenu 446