xref: /openbmc/linux/drivers/gpu/drm/panel/Kconfig (revision e3da4c40) 
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ABT_Y030XX067A
12	tristate "ABT Y030XX067A 320x480 LCD panel"
13	depends on OF && SPI
14	select REGMAP_SPI
15	help
16	  Say Y here to enable support for the Asia Better Technology Ltd.
17	  Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18	  and RG-99 handheld gaming consoles.
19
20config DRM_PANEL_ARM_VERSATILE
21	tristate "ARM Versatile panel driver"
22	depends on OF
23	depends on MFD_SYSCON
24	select VIDEOMODE_HELPERS
25	help
26	  This driver supports the ARM Versatile panels connected to ARM
27	  reference designs. The panel is detected using special registers
28	  in the Versatile family syscon registers.
29
30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31	tristate "ASUS Z00T TM5P5 NT35596 panel"
32	depends on GPIOLIB && OF
33	depends on DRM_MIPI_DSI
34	depends on BACKLIGHT_CLASS_DEVICE
35	help
36	  Say Y here if you want to enable support for the ASUS TMP5P5
37	  NT35596 1080x1920 video mode panel as found in some Asus
38	  Zenfone 2 Laser Z00T devices.
39
40config DRM_PANEL_AUO_A030JTN01
41	tristate "AUO A030JTN01"
42	depends on SPI
43	select REGMAP_SPI
44	help
45	  Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel
46	  as found in the YLM RS-97 handheld gaming console.
47
48config DRM_PANEL_BOE_BF060Y8M_AJ0
49	tristate "Boe BF060Y8M-AJ0 panel"
50	depends on OF
51	depends on DRM_MIPI_DSI
52	depends on BACKLIGHT_CLASS_DEVICE
53	help
54	  Say Y here if you want to enable support for Boe BF060Y8M-AJ0
55	  5.99" AMOLED modules. The panel has a 1080x2160 resolution and
56	  uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
57	  the host and backlight is controlled through DSI commands.
58
59config DRM_PANEL_BOE_HIMAX8279D
60	tristate "Boe Himax8279d panel"
61	depends on OF
62	depends on DRM_MIPI_DSI
63	depends on BACKLIGHT_CLASS_DEVICE
64	help
65	  Say Y here if you want to enable support for Boe Himax8279d
66	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
67	  24 bit RGB per pixel. It provides a MIPI DSI interface to
68	  the host and has a built-in LED backlight.
69
70config DRM_PANEL_BOE_TV101WUM_NL6
71	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
72	depends on OF
73	depends on DRM_MIPI_DSI
74	depends on BACKLIGHT_CLASS_DEVICE
75	help
76	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
77	  45NA WUXGA PANEL DSI Video Mode panel
78
79config DRM_PANEL_DSI_CM
80	tristate "Generic DSI command mode panels"
81	depends on OF
82	depends on DRM_MIPI_DSI
83	depends on BACKLIGHT_CLASS_DEVICE
84	help
85	  DRM panel driver for DSI command mode panels with support for
86	  embedded and external backlights.
87
88config DRM_PANEL_LVDS
89	tristate "Generic LVDS panel driver"
90	depends on OF
91	depends on BACKLIGHT_CLASS_DEVICE
92	select VIDEOMODE_HELPERS
93	help
94	  This driver supports LVDS panels that don't require device-specific
95	  handling of power supplies or control signals. It implements automatic
96	  backlight handling if the panel is attached to a backlight controller.
97
98config DRM_PANEL_SIMPLE
99	tristate "support for simple panels (other than eDP ones)"
100	depends on OF
101	depends on BACKLIGHT_CLASS_DEVICE
102	depends on PM
103	select VIDEOMODE_HELPERS
104	help
105	  DRM panel driver for dumb non-eDP panels that need at most a regulator
106	  and a GPIO to be powered up. Optionally a backlight can be attached so
107	  that it can be automatically turned off when the panel goes into a
108	  low power state.
109
110config DRM_PANEL_EDP
111	tristate "support for simple Embedded DisplayPort panels"
112	depends on OF
113	depends on BACKLIGHT_CLASS_DEVICE
114	depends on PM
115	select VIDEOMODE_HELPERS
116	select DRM_DISPLAY_DP_HELPER
117	select DRM_DISPLAY_HELPER
118	select DRM_DP_AUX_BUS
119	select DRM_KMS_HELPER
120	help
121	  DRM panel driver for dumb eDP panels that need at most a regulator and
122	  a GPIO to be powered up. Optionally a backlight can be attached so
123	  that it can be automatically turned off when the panel goes into a
124	  low power state.
125
126config DRM_PANEL_EBBG_FT8719
127	tristate "EBBG FT8719 panel driver"
128	depends on OF
129	depends on DRM_MIPI_DSI
130	depends on BACKLIGHT_CLASS_DEVICE
131	help
132	  Say Y here if you want to enable support for the EBBG FT8719
133	  video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
134	  The panel has a resolution of 1080x2246. It provides a MIPI DSI
135	  interface to the host.
136
137config DRM_PANEL_ELIDA_KD35T133
138	tristate "Elida KD35T133 panel driver"
139	depends on OF
140	depends on DRM_MIPI_DSI
141	depends on BACKLIGHT_CLASS_DEVICE
142	help
143	  Say Y here if you want to enable support for the Elida
144	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
145	  system interfaces.
146
147config DRM_PANEL_FEIXIN_K101_IM2BA02
148	tristate "Feixin K101 IM2BA02 panel"
149	depends on OF
150	depends on DRM_MIPI_DSI
151	depends on BACKLIGHT_CLASS_DEVICE
152	help
153	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
154	  4-lane 800x1280 MIPI DSI panel.
155
156config DRM_PANEL_FEIYANG_FY07024DI26A30D
157	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
158	depends on OF
159	depends on DRM_MIPI_DSI
160	depends on BACKLIGHT_CLASS_DEVICE
161	help
162	  Say Y if you want to enable support for panels based on the
163	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
164
165config DRM_PANEL_HIMAX_HX8394
166	tristate "HIMAX HX8394 MIPI-DSI LCD panels"
167	depends on OF
168	depends on DRM_MIPI_DSI
169	depends on BACKLIGHT_CLASS_DEVICE
170	help
171	  Say Y if you want to enable support for panels based on the
172	  Himax HX8394 controller, such as the HannStar HSD060BHW4
173	  720x1440 TFT LCD panel that uses a MIPI-DSI interface.
174
175	  If M is selected the module will be called panel-himax-hx8394.
176
177config DRM_PANEL_ILITEK_IL9322
178	tristate "Ilitek ILI9322 320x240 QVGA panels"
179	depends on OF && SPI
180	select REGMAP
181	help
182	  Say Y here if you want to enable support for Ilitek IL9322
183	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
184
185config DRM_PANEL_ILITEK_ILI9341
186	tristate "Ilitek ILI9341 240x320 QVGA panels"
187	depends on OF && SPI
188	select DRM_KMS_HELPER
189	select DRM_GEM_DMA_HELPER
190	depends on BACKLIGHT_CLASS_DEVICE
191	select DRM_MIPI_DBI
192	help
193	  Say Y here if you want to enable support for Ilitek IL9341
194	  QVGA (240x320) RGB panels. support serial & parallel rgb
195	  interface.
196
197config DRM_PANEL_ILITEK_ILI9881C
198	tristate "Ilitek ILI9881C-based panels"
199	depends on OF
200	depends on DRM_MIPI_DSI
201	depends on BACKLIGHT_CLASS_DEVICE
202	help
203	  Say Y if you want to enable support for panels based on the
204	  Ilitek ILI9881c controller.
205
206config DRM_PANEL_INNOLUX_EJ030NA
207        tristate "Innolux EJ030NA 320x480 LCD panel"
208        depends on OF && SPI
209        select REGMAP_SPI
210        help
211          Say Y here to enable support for the Innolux/Chimei EJ030NA
212          320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
213          and LDK handheld gaming consoles.
214
215config DRM_PANEL_INNOLUX_P079ZCA
216	tristate "Innolux P079ZCA panel"
217	depends on OF
218	depends on DRM_MIPI_DSI
219	depends on BACKLIGHT_CLASS_DEVICE
220	help
221	  Say Y here if you want to enable support for Innolux P079ZCA
222	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
223	  24 bit RGB per pixel. It provides a MIPI DSI interface to
224	  the host and has a built-in LED backlight.
225
226config DRM_PANEL_JADARD_JD9365DA_H3
227	tristate "Jadard JD9365DA-H3 WXGA DSI panel"
228	depends on OF
229	depends on DRM_MIPI_DSI
230	depends on BACKLIGHT_CLASS_DEVICE
231	help
232	  Say Y here if you want to enable support for Jadard JD9365DA-H3
233	  WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
234	  800RGBx1280 dots at maximum.
235
236config DRM_PANEL_JDI_LT070ME05000
237	tristate "JDI LT070ME05000 WUXGA DSI panel"
238	depends on OF
239	depends on DRM_MIPI_DSI
240	depends on BACKLIGHT_CLASS_DEVICE
241	help
242	  Say Y here if you want to enable support for JDI DSI video mode
243	  panel as found in Google Nexus 7 (2013) devices.
244	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
245	  24 bit per pixel.
246
247config DRM_PANEL_JDI_R63452
248	tristate "JDI R63452 Full HD DSI panel"
249	depends on OF
250	depends on DRM_MIPI_DSI
251	depends on BACKLIGHT_CLASS_DEVICE
252	help
253	  Say Y here if you want to enable support for the JDI R63452
254	  DSI command mode panel as found in Xiaomi Mi 5 Devices.
255
256config DRM_PANEL_KHADAS_TS050
257	tristate "Khadas TS050 panel"
258	depends on OF
259	depends on DRM_MIPI_DSI
260	depends on BACKLIGHT_CLASS_DEVICE
261	help
262	  Say Y here if you want to enable support for Khadas TS050 TFT-LCD
263	  panel module. The panel has a 1080x1920 resolution and uses
264	  24 bit RGB per pixel. It provides a MIPI DSI interface to
265	  the host, a built-in LED backlight and touch controller.
266
267config DRM_PANEL_KINGDISPLAY_KD097D04
268	tristate "Kingdisplay kd097d04 panel"
269	depends on OF
270	depends on DRM_MIPI_DSI
271	depends on BACKLIGHT_CLASS_DEVICE
272	help
273	  Say Y here if you want to enable support for Kingdisplay kd097d04
274	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
275	  24 bit RGB per pixel. It provides a MIPI DSI interface to
276	  the host and has a built-in LED backlight.
277
278config DRM_PANEL_LEADTEK_LTK050H3146W
279	tristate "Leadtek LTK050H3146W panel"
280	depends on OF
281	depends on DRM_MIPI_DSI
282	depends on BACKLIGHT_CLASS_DEVICE
283	help
284	  Say Y here if you want to enable support for Leadtek LTK050H3146W
285	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
286	  24 bit RGB per pixel. It provides a MIPI DSI interface to
287	  the host and has a built-in LED backlight.
288
289config DRM_PANEL_LEADTEK_LTK500HD1829
290	tristate "Leadtek LTK500HD1829 panel"
291	depends on OF
292	depends on DRM_MIPI_DSI
293	depends on BACKLIGHT_CLASS_DEVICE
294	help
295	  Say Y here if you want to enable support for Kingdisplay kd097d04
296	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
297	  24 bit RGB per pixel. It provides a MIPI DSI interface to
298	  the host and has a built-in LED backlight.
299
300config DRM_PANEL_SAMSUNG_LD9040
301	tristate "Samsung LD9040 RGB/SPI panel"
302	depends on OF && SPI
303	depends on BACKLIGHT_CLASS_DEVICE
304	select VIDEOMODE_HELPERS
305
306config DRM_PANEL_LG_LB035Q02
307	tristate "LG LB035Q024573 RGB panel"
308	depends on GPIOLIB && OF && SPI
309	help
310	  Say Y here if you want to enable support for the LB035Q02 RGB panel
311	  (found on the Gumstix Overo Palo35 board). To compile this driver as
312	  a module, choose M here.
313
314config DRM_PANEL_LG_LG4573
315	tristate "LG4573 RGB/SPI panel"
316	depends on OF && SPI
317	select VIDEOMODE_HELPERS
318	help
319	  Say Y here if you want to enable support for LG4573 RGB panel.
320	  To compile this driver as a module, choose M here.
321
322config DRM_PANEL_MAGNACHIP_D53E6EA8966
323	tristate "Magnachip D53E6EA8966 DSI panel"
324	depends on OF && SPI
325	depends on DRM_MIPI_DSI
326	depends on BACKLIGHT_CLASS_DEVICE
327	select DRM_MIPI_DBI
328	help
329	  DRM panel driver for the Samsung AMS495QA01 panel controlled
330	  with the Magnachip D53E6EA8966 panel IC. This panel receives
331	  video data via DSI but commands via 9-bit SPI using DBI.
332
333config DRM_PANEL_NEC_NL8048HL11
334	tristate "NEC NL8048HL11 RGB panel"
335	depends on GPIOLIB && OF && SPI
336	help
337	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
338	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
339	  as a module, choose M here.
340
341config DRM_PANEL_NEWVISION_NV3051D
342	tristate "NewVision NV3051D DSI panel"
343	depends on OF
344	depends on DRM_MIPI_DSI
345	depends on BACKLIGHT_CLASS_DEVICE
346	help
347	  This driver supports the NV3051D based panel found on the Anbernic
348	  RG353P and RG353V.
349
350config DRM_PANEL_NEWVISION_NV3052C
351	tristate "NewVision NV3052C RGB/SPI panel"
352	depends on OF && SPI
353	depends on BACKLIGHT_CLASS_DEVICE
354	select DRM_MIPI_DBI
355	help
356	  Say Y here if you want to enable support for the panels built
357	  around the NewVision NV3052C display controller.
358
359config DRM_PANEL_NOVATEK_NT35510
360	tristate "Novatek NT35510 RGB panel driver"
361	depends on OF
362	depends on DRM_MIPI_DSI
363	depends on BACKLIGHT_CLASS_DEVICE
364	help
365	  Say Y here if you want to enable support for the panels built
366	  around the Novatek NT35510 display controller, such as some
367	  Hydis panels.
368
369config DRM_PANEL_NOVATEK_NT35560
370	tristate "Novatek NT35560 DSI command mode panel"
371	depends on OF
372	depends on DRM_MIPI_DSI
373	depends on BACKLIGHT_CLASS_DEVICE
374	select VIDEOMODE_HELPERS
375	help
376	  Say Y here if you want to enable the Novatek NT35560 display
377	  controller. This panel supports DSI in both command and video
378	  mode. This supports several panels such as Sony ACX424AKM and
379	  ACX424AKP.
380
381config DRM_PANEL_NOVATEK_NT35950
382	tristate "Novatek NT35950 DSI panel"
383	depends on OF
384	depends on DRM_MIPI_DSI
385	depends on BACKLIGHT_CLASS_DEVICE
386	help
387	  Say Y here if you want to enable support for the panels built
388	  around the Novatek NT35950 display controller, such as some
389	  Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
390	  mobile phones.
391
392config DRM_PANEL_NOVATEK_NT36523
393	tristate "Novatek NT36523 panel driver"
394	depends on OF
395	depends on DRM_MIPI_DSI
396	depends on BACKLIGHT_CLASS_DEVICE
397	help
398	  Say Y here if you want to enable support for the panels built
399	  around the Novatek NT36523 display controller, such as some
400	  Boe panels used in Xiaomi Mi Pad 5 and 5 Pro tablets.
401
402config DRM_PANEL_NOVATEK_NT36672A
403	tristate "Novatek NT36672A DSI panel"
404	depends on OF
405	depends on DRM_MIPI_DSI
406	depends on BACKLIGHT_CLASS_DEVICE
407	help
408	  Say Y here if you want to enable support for the panels built
409	  around the Novatek NT36672A display controller, such as some
410	  Tianma panels used in a few Xiaomi Poco F1 mobile phones.
411
412config DRM_PANEL_NOVATEK_NT39016
413	tristate "Novatek NT39016 RGB/SPI panel"
414	depends on OF && SPI
415	depends on BACKLIGHT_CLASS_DEVICE
416	select REGMAP_SPI
417	help
418	  Say Y here if you want to enable support for the panels built
419	  around the Novatek NT39016 display controller.
420
421config DRM_PANEL_MANTIX_MLAF057WE51
422	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
423	depends on OF
424	depends on DRM_MIPI_DSI
425	depends on BACKLIGHT_CLASS_DEVICE
426	help
427	  Say Y here if you want to enable support for the Mantix
428	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
429	  has a resolution of 720x1440 pixels, a built in backlight and touch
430	  controller.
431
432config DRM_PANEL_OLIMEX_LCD_OLINUXINO
433	tristate "Olimex LCD-OLinuXino panel"
434	depends on OF
435	depends on I2C
436	depends on BACKLIGHT_CLASS_DEVICE
437	select CRC32
438	help
439	  The panel is used with different sizes LCDs, from 480x272 to
440	  1280x800, and 24 bit per pixel.
441
442	  Say Y here if you want to enable support for Olimex Ltd.
443	  LCD-OLinuXino panel.
444
445config DRM_PANEL_ORISETECH_OTA5601A
446        tristate "Orise Technology ota5601a RGB/SPI panel"
447        depends on SPI
448        depends on BACKLIGHT_CLASS_DEVICE
449        select REGMAP_SPI
450        help
451          Say Y here if you want to enable support for the panels built
452          around the Orise Technology OTA9601A display controller.
453
454config DRM_PANEL_ORISETECH_OTM8009A
455	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
456	depends on OF
457	depends on DRM_MIPI_DSI
458	depends on BACKLIGHT_CLASS_DEVICE
459	help
460	  Say Y here if you want to enable support for Orise Technology
461	  otm8009a 480x800 dsi 2dl panel.
462
463config DRM_PANEL_OSD_OSD101T2587_53TS
464	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
465	depends on OF
466	depends on DRM_MIPI_DSI
467	depends on BACKLIGHT_CLASS_DEVICE
468	help
469	  Say Y here if you want to enable support for One Stop Displays
470	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
471
472config DRM_PANEL_PANASONIC_VVX10F034N00
473	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
474	depends on OF
475	depends on DRM_MIPI_DSI
476	depends on BACKLIGHT_CLASS_DEVICE
477	help
478	  Say Y here if you want to enable support for Panasonic VVX10F034N00
479	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
480	  Xperia Z2 tablets
481
482config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
483	tristate "Raspberry Pi 7-inch touchscreen panel"
484	depends on DRM_MIPI_DSI
485	help
486	  Say Y here if you want to enable support for the Raspberry
487	  Pi 7" Touchscreen.  To compile this driver as a module,
488	  choose M here.
489
490config DRM_PANEL_RAYDIUM_RM67191
491	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
492	depends on OF
493	depends on DRM_MIPI_DSI
494	depends on BACKLIGHT_CLASS_DEVICE
495	help
496	  Say Y here if you want to enable support for Raydium RM67191 FHD
497	  (1080x1920) DSI panel.
498
499config DRM_PANEL_RAYDIUM_RM68200
500	tristate "Raydium RM68200 720x1280 DSI video mode panel"
501	depends on OF
502	depends on DRM_MIPI_DSI
503	depends on BACKLIGHT_CLASS_DEVICE
504	help
505	  Say Y here if you want to enable support for Raydium RM68200
506	  720x1280 DSI video mode panel.
507
508config DRM_PANEL_RONBO_RB070D30
509	tristate "Ronbo Electronics RB070D30 panel"
510	depends on OF
511	depends on DRM_MIPI_DSI
512	depends on BACKLIGHT_CLASS_DEVICE
513	help
514	  Say Y here if you want to enable support for Ronbo Electronics
515	  RB070D30 1024x600 DSI panel.
516
517config DRM_PANEL_SAMSUNG_ATNA33XC20
518	tristate "Samsung ATNA33XC20 eDP panel"
519	depends on OF
520	depends on BACKLIGHT_CLASS_DEVICE
521	depends on PM
522	select DRM_DISPLAY_DP_HELPER
523	select DRM_DISPLAY_HELPER
524	select DRM_DP_AUX_BUS
525	help
526	  DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
527	  be handled by the DRM_PANEL_SIMPLE driver because its power
528	  sequencing is non-standard.
529
530config DRM_PANEL_SAMSUNG_DB7430
531	tristate "Samsung DB7430-based DPI panels"
532	depends on OF && SPI && GPIOLIB
533	depends on BACKLIGHT_CLASS_DEVICE
534	select DRM_MIPI_DBI
535	help
536	  Say Y here if you want to enable support for the Samsung
537	  DB7430 DPI display controller used in such devices as the
538	  LMS397KF04 480x800 DPI panel.
539
540config DRM_PANEL_SAMSUNG_S6D16D0
541	tristate "Samsung S6D16D0 DSI video mode panel"
542	depends on OF
543	depends on DRM_MIPI_DSI
544	select VIDEOMODE_HELPERS
545
546config DRM_PANEL_SAMSUNG_S6D27A1
547	tristate "Samsung S6D27A1 DPI panel driver"
548	depends on OF && SPI && GPIOLIB
549	select DRM_MIPI_DBI
550	help
551	  Say Y here if you want to enable support for the Samsung
552	  S6D27A1 DPI 480x800 panel.
553
554	  This panel can be found in Samsung Galaxy Ace 2
555	  GT-I8160 mobile phone.
556
557config DRM_PANEL_SAMSUNG_S6D7AA0
558	tristate "Samsung S6D7AA0 MIPI-DSI video mode panel controller"
559	depends on OF
560	depends on BACKLIGHT_CLASS_DEVICE
561	select DRM_MIPI_DSI
562	select VIDEOMODE_HELPERS
563
564config DRM_PANEL_SAMSUNG_S6E3HA2
565	tristate "Samsung S6E3HA2 DSI video mode panel"
566	depends on OF
567	depends on DRM_MIPI_DSI
568	depends on BACKLIGHT_CLASS_DEVICE
569	select VIDEOMODE_HELPERS
570
571config DRM_PANEL_SAMSUNG_S6E63J0X03
572	tristate "Samsung S6E63J0X03 DSI command mode panel"
573	depends on OF
574	depends on DRM_MIPI_DSI
575	depends on BACKLIGHT_CLASS_DEVICE
576	select VIDEOMODE_HELPERS
577
578config DRM_PANEL_SAMSUNG_S6E63M0
579	tristate "Samsung S6E63M0 RGB panel"
580	depends on OF
581	depends on BACKLIGHT_CLASS_DEVICE
582	help
583	  Say Y here if you want to enable support for Samsung S6E63M0
584	  AMOLED LCD panel. This panel can be accessed using SPI or
585	  DSI.
586
587config DRM_PANEL_SAMSUNG_S6E63M0_SPI
588	tristate "Samsung S6E63M0 RGB SPI interface"
589	depends on SPI
590	depends on DRM_PANEL_SAMSUNG_S6E63M0
591	default DRM_PANEL_SAMSUNG_S6E63M0
592	select DRM_MIPI_DBI
593	help
594	  Say Y here if you want to be able to access the Samsung
595	  S6E63M0 panel using SPI.
596
597config DRM_PANEL_SAMSUNG_S6E63M0_DSI
598	tristate "Samsung S6E63M0 RGB DSI interface"
599	depends on DRM_MIPI_DSI
600	depends on DRM_PANEL_SAMSUNG_S6E63M0
601	help
602	  Say Y here if you want to be able to access the Samsung
603	  S6E63M0 panel using DSI.
604
605config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
606	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
607	depends on OF
608	select DRM_MIPI_DSI
609	select VIDEOMODE_HELPERS
610
611config DRM_PANEL_SAMSUNG_S6E8AA0
612	tristate "Samsung S6E8AA0 DSI video mode panel"
613	depends on OF
614	select DRM_MIPI_DSI
615	select VIDEOMODE_HELPERS
616
617config DRM_PANEL_SAMSUNG_SOFEF00
618	tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
619	depends on OF
620	depends on DRM_MIPI_DSI
621	depends on BACKLIGHT_CLASS_DEVICE
622	select VIDEOMODE_HELPERS
623	help
624	  Say Y or M here if you want to enable support for the Samsung AMOLED
625	  command mode panels found in the OnePlus 6/6T smartphones.
626
627	  The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
628
629config DRM_PANEL_SEIKO_43WVF1G
630	tristate "Seiko 43WVF1G panel"
631	depends on OF
632	depends on BACKLIGHT_CLASS_DEVICE
633	select VIDEOMODE_HELPERS
634	help
635	  Say Y here if you want to enable support for the Seiko
636	  43WVF1G controller for 800x480 LCD panels
637
638config DRM_PANEL_SHARP_LQ101R1SX01
639	tristate "Sharp LQ101R1SX01 panel"
640	depends on OF
641	depends on DRM_MIPI_DSI
642	depends on BACKLIGHT_CLASS_DEVICE
643	help
644	  Say Y here if you want to enable support for Sharp LQ101R1SX01
645	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
646	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
647	  the host and has a built-in LED backlight.
648
649	  To compile this driver as a module, choose M here: the module
650	  will be called panel-sharp-lq101r1sx01.
651
652config DRM_PANEL_SHARP_LS037V7DW01
653	tristate "Sharp LS037V7DW01 VGA LCD panel"
654	depends on GPIOLIB && OF && REGULATOR
655	help
656	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
657	  (480x640) LCD panel (found on the TI SDP3430 board).
658
659config DRM_PANEL_SHARP_LS043T1LE01
660	tristate "Sharp LS043T1LE01 qHD video mode panel"
661	depends on OF
662	depends on DRM_MIPI_DSI
663	depends on BACKLIGHT_CLASS_DEVICE
664	help
665	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
666	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
667
668config DRM_PANEL_SHARP_LS060T1SX01
669	tristate "Sharp LS060T1SX01 FullHD video mode panel"
670	depends on OF
671	depends on DRM_MIPI_DSI
672	depends on BACKLIGHT_CLASS_DEVICE
673	help
674	  Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
675	  FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
676	  Bundle.
677
678config DRM_PANEL_SITRONIX_ST7701
679	tristate "Sitronix ST7701 panel driver"
680	depends on OF
681	depends on DRM_MIPI_DSI
682	depends on BACKLIGHT_CLASS_DEVICE
683	help
684	  Say Y here if you want to enable support for the Sitronix
685	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
686	  system interfaces.
687
688config DRM_PANEL_SITRONIX_ST7703
689	tristate "Sitronix ST7703 based MIPI touchscreen panels"
690	depends on OF
691	depends on DRM_MIPI_DSI
692	depends on BACKLIGHT_CLASS_DEVICE
693	help
694	  Say Y here if you want to enable support for Sitronix ST7703 based
695	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
696	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
697	  in backlight and touch controller.
698	  Touch input support is provided by the goodix driver and needs to be
699	  selected separately.
700
701config DRM_PANEL_SITRONIX_ST7789V
702	tristate "Sitronix ST7789V panel"
703	depends on OF && SPI
704	depends on BACKLIGHT_CLASS_DEVICE
705	help
706	  Say Y here if you want to enable support for the Sitronix
707	  ST7789V controller for 240x320 LCD panels
708
709config DRM_PANEL_SONY_ACX565AKM
710	tristate "Sony ACX565AKM panel"
711	depends on GPIOLIB && OF && SPI
712	depends on BACKLIGHT_CLASS_DEVICE
713	help
714	  Say Y here if you want to enable support for the Sony ACX565AKM
715	  800x600 3.5" panel (found on the Nokia N900).
716
717config DRM_PANEL_SONY_TD4353_JDI
718	tristate "Sony TD4353 JDI panel"
719	depends on GPIOLIB && OF
720	depends on DRM_MIPI_DSI
721	depends on BACKLIGHT_CLASS_DEVICE
722	help
723	  Say Y here if you want to enable support for the Sony Tama
724	  TD4353 JDI command mode panel as found on some Sony Xperia
725	  XZ2 and XZ2 Compact smartphones.
726
727config DRM_PANEL_SONY_TULIP_TRULY_NT35521
728	tristate "Sony Tulip Truly NT35521 panel"
729	depends on GPIOLIB && OF
730	depends on DRM_MIPI_DSI
731	depends on BACKLIGHT_CLASS_DEVICE
732	help
733	  Say Y here if you want to enable support for the Sony Tulip
734	  NT35521 1280x720 video mode panel as found on Sony Xperia M4
735	  Aqua phone.
736
737config DRM_PANEL_STARTEK_KD070FHFID015
738	tristate "STARTEK KD070FHFID015 panel"
739	depends on OF
740	depends on DRM_MIPI_DSI
741	depends on BACKLIGHT_CLASS_DEVICE
742	help
743	  Say Y here if you want to enable support for STARTEK KD070FHFID015 DSI panel
744	  based on RENESAS-R69429 controller. The pannel is a 7-inch TFT LCD display
745	  with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
746	  the host, a built-in LED backlight and touch controller.
747
748config DRM_PANEL_TDO_TL070WSH30
749	tristate "TDO TL070WSH30 DSI panel"
750	depends on OF
751	depends on DRM_MIPI_DSI
752	depends on BACKLIGHT_CLASS_DEVICE
753	help
754	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
755	  panel module. The panel has a 1024×600 resolution and uses
756	  24 bit RGB per pixel. It provides a MIPI DSI interface to
757	  the host, a built-in LED backlight and touch controller.
758
759config DRM_PANEL_TPO_TD028TTEC1
760	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
761	depends on OF && SPI
762	depends on BACKLIGHT_CLASS_DEVICE
763	help
764	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
765	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
766
767config DRM_PANEL_TPO_TD043MTEA1
768	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
769	depends on GPIOLIB && OF && REGULATOR && SPI
770	help
771	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
772	  4.3" panel (found on the OMAP3 Pandora board).
773
774config DRM_PANEL_TPO_TPG110
775	tristate "TPO TPG 800x400 panel"
776	depends on OF && SPI && GPIOLIB
777	depends on BACKLIGHT_CLASS_DEVICE
778	help
779	  Say Y here if you want to enable support for TPO TPG110
780	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
781	  800x400 LCD panels.
782
783config DRM_PANEL_TRULY_NT35597_WQXGA
784	tristate "Truly WQXGA"
785	depends on OF
786	depends on DRM_MIPI_DSI
787	help
788	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
789	  Video Mode panel
790
791config DRM_PANEL_VISIONOX_RM69299
792	tristate "Visionox RM69299"
793	depends on OF
794	depends on DRM_MIPI_DSI
795	help
796	  Say Y here if you want to enable support for Visionox
797	  RM69299  DSI Video Mode panel.
798
799config DRM_PANEL_VISIONOX_VTDR6130
800	tristate "Visionox VTDR6130"
801	depends on OF
802	depends on DRM_MIPI_DSI
803	depends on BACKLIGHT_CLASS_DEVICE
804	help
805	  Say Y here if you want to enable support for Visionox
806	  VTDR6130 1080x2400 AMOLED DSI panel.
807
808config DRM_PANEL_VISIONOX_R66451
809	tristate "Visionox R66451"
810	depends on OF
811	depends on DRM_MIPI_DSI
812	depends on BACKLIGHT_CLASS_DEVICE
813	select DRM_DISPLAY_DP_HELPER
814	select DRM_DISPLAY_HELPER
815	help
816	  Say Y here if you want to enable support for Visionox
817	  R66451 1080x2340 AMOLED DSI panel.
818
819config DRM_PANEL_WIDECHIPS_WS2401
820	tristate "Widechips WS2401 DPI panel driver"
821	depends on SPI && GPIOLIB
822	depends on BACKLIGHT_CLASS_DEVICE
823	select DRM_MIPI_DBI
824	help
825	  Say Y here if you want to enable support for the Widechips WS2401 DPI
826	  480x800 display controller used in panels such as Samsung LMS380KF01.
827	  This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
828
829config DRM_PANEL_XINPENG_XPP055C272
830	tristate "Xinpeng XPP055C272 panel driver"
831	depends on OF
832	depends on DRM_MIPI_DSI
833	depends on BACKLIGHT_CLASS_DEVICE
834	help
835	  Say Y here if you want to enable support for the Xinpeng
836	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
837	  system interfaces.
838endmenu
839