1# SPDX-License-Identifier: GPL-2.0-only 2config DRM_PANEL 3 bool 4 depends on DRM 5 help 6 Panel registration and lookup framework. 7 8menu "Display Panels" 9 depends on DRM && DRM_PANEL 10 11config DRM_PANEL_ARM_VERSATILE 12 tristate "ARM Versatile panel driver" 13 depends on OF 14 depends on MFD_SYSCON 15 select VIDEOMODE_HELPERS 16 help 17 This driver supports the ARM Versatile panels connected to ARM 18 reference designs. The panel is detected using special registers 19 in the Versatile family syscon registers. 20 21config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 22 tristate "ASUS Z00T TM5P5 NT35596 panel" 23 depends on GPIOLIB && OF 24 depends on DRM_MIPI_DSI 25 depends on BACKLIGHT_CLASS_DEVICE 26 help 27 Say Y here if you want to enable support for the ASUS TMP5P5 28 NT35596 1080x1920 video mode panel as found in some Asus 29 Zenfone 2 Laser Z00T devices. 30 31config DRM_PANEL_BOE_HIMAX8279D 32 tristate "Boe Himax8279d panel" 33 depends on OF 34 depends on DRM_MIPI_DSI 35 depends on BACKLIGHT_CLASS_DEVICE 36 help 37 Say Y here if you want to enable support for Boe Himax8279d 38 TFT-LCD modules. The panel has a 1200x1920 resolution and uses 39 24 bit RGB per pixel. It provides a MIPI DSI interface to 40 the host and has a built-in LED backlight. 41 42config DRM_PANEL_BOE_TV101WUM_NL6 43 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" 44 depends on OF 45 depends on DRM_MIPI_DSI 46 depends on BACKLIGHT_CLASS_DEVICE 47 help 48 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 49 45NA WUXGA PANEL DSI Video Mode panel 50 51config DRM_PANEL_LVDS 52 tristate "Generic LVDS panel driver" 53 depends on OF 54 depends on BACKLIGHT_CLASS_DEVICE 55 select VIDEOMODE_HELPERS 56 help 57 This driver supports LVDS panels that don't require device-specific 58 handling of power supplies or control signals. It implements automatic 59 backlight handling if the panel is attached to a backlight controller. 60 61config DRM_PANEL_SIMPLE 62 tristate "support for simple panels" 63 depends on OF 64 depends on BACKLIGHT_CLASS_DEVICE 65 select VIDEOMODE_HELPERS 66 help 67 DRM panel driver for dumb panels that need at most a regulator and 68 a GPIO to be powered up. Optionally a backlight can be attached so 69 that it can be automatically turned off when the panel goes into a 70 low power state. 71 72config DRM_PANEL_ELIDA_KD35T133 73 tristate "Elida KD35T133 panel driver" 74 depends on OF 75 depends on DRM_MIPI_DSI 76 depends on BACKLIGHT_CLASS_DEVICE 77 help 78 Say Y here if you want to enable support for the Elida 79 KD35T133 controller for 320x480 LCD panels with MIPI-DSI 80 system interfaces. 81 82config DRM_PANEL_FEIXIN_K101_IM2BA02 83 tristate "Feixin K101 IM2BA02 panel" 84 depends on OF 85 depends on DRM_MIPI_DSI 86 depends on BACKLIGHT_CLASS_DEVICE 87 help 88 Say Y here if you want to enable support for the Feixin K101 IM2BA02 89 4-lane 800x1280 MIPI DSI panel. 90 91config DRM_PANEL_FEIYANG_FY07024DI26A30D 92 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" 93 depends on OF 94 depends on DRM_MIPI_DSI 95 depends on BACKLIGHT_CLASS_DEVICE 96 help 97 Say Y if you want to enable support for panels based on the 98 Feiyang FY07024DI26A30-D MIPI-DSI interface. 99 100config DRM_PANEL_ILITEK_IL9322 101 tristate "Ilitek ILI9322 320x240 QVGA panels" 102 depends on OF && SPI 103 select REGMAP 104 help 105 Say Y here if you want to enable support for Ilitek IL9322 106 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. 107 108config DRM_PANEL_ILITEK_ILI9881C 109 tristate "Ilitek ILI9881C-based panels" 110 depends on OF 111 depends on DRM_MIPI_DSI 112 depends on BACKLIGHT_CLASS_DEVICE 113 help 114 Say Y if you want to enable support for panels based on the 115 Ilitek ILI9881c controller. 116 117config DRM_PANEL_INNOLUX_P079ZCA 118 tristate "Innolux P079ZCA panel" 119 depends on OF 120 depends on DRM_MIPI_DSI 121 depends on BACKLIGHT_CLASS_DEVICE 122 help 123 Say Y here if you want to enable support for Innolux P079ZCA 124 TFT-LCD modules. The panel has a 1024x768 resolution and uses 125 24 bit RGB per pixel. It provides a MIPI DSI interface to 126 the host and has a built-in LED backlight. 127 128config DRM_PANEL_JDI_LT070ME05000 129 tristate "JDI LT070ME05000 WUXGA DSI panel" 130 depends on OF 131 depends on DRM_MIPI_DSI 132 depends on BACKLIGHT_CLASS_DEVICE 133 help 134 Say Y here if you want to enable support for JDI DSI video mode 135 panel as found in Google Nexus 7 (2013) devices. 136 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 137 24 bit per pixel. 138 139config DRM_PANEL_KINGDISPLAY_KD097D04 140 tristate "Kingdisplay kd097d04 panel" 141 depends on OF 142 depends on DRM_MIPI_DSI 143 depends on BACKLIGHT_CLASS_DEVICE 144 help 145 Say Y here if you want to enable support for Kingdisplay kd097d04 146 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 147 24 bit RGB per pixel. It provides a MIPI DSI interface to 148 the host and has a built-in LED backlight. 149 150config DRM_PANEL_LEADTEK_LTK050H3146W 151 tristate "Leadtek LTK050H3146W panel" 152 depends on OF 153 depends on DRM_MIPI_DSI 154 depends on BACKLIGHT_CLASS_DEVICE 155 help 156 Say Y here if you want to enable support for Leadtek LTK050H3146W 157 TFT-LCD modules. The panel has a 720x1280 resolution and uses 158 24 bit RGB per pixel. It provides a MIPI DSI interface to 159 the host and has a built-in LED backlight. 160 161config DRM_PANEL_LEADTEK_LTK500HD1829 162 tristate "Leadtek LTK500HD1829 panel" 163 depends on OF 164 depends on DRM_MIPI_DSI 165 depends on BACKLIGHT_CLASS_DEVICE 166 help 167 Say Y here if you want to enable support for Kingdisplay kd097d04 168 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 169 24 bit RGB per pixel. It provides a MIPI DSI interface to 170 the host and has a built-in LED backlight. 171 172config DRM_PANEL_SAMSUNG_LD9040 173 tristate "Samsung LD9040 RGB/SPI panel" 174 depends on OF && SPI 175 select VIDEOMODE_HELPERS 176 177config DRM_PANEL_LG_LB035Q02 178 tristate "LG LB035Q024573 RGB panel" 179 depends on GPIOLIB && OF && SPI 180 help 181 Say Y here if you want to enable support for the LB035Q02 RGB panel 182 (found on the Gumstix Overo Palo35 board). To compile this driver as 183 a module, choose M here. 184 185config DRM_PANEL_LG_LG4573 186 tristate "LG4573 RGB/SPI panel" 187 depends on OF && SPI 188 select VIDEOMODE_HELPERS 189 help 190 Say Y here if you want to enable support for LG4573 RGB panel. 191 To compile this driver as a module, choose M here. 192 193config DRM_PANEL_NEC_NL8048HL11 194 tristate "NEC NL8048HL11 RGB panel" 195 depends on GPIOLIB && OF && SPI 196 help 197 Say Y here if you want to enable support for the NEC NL8048HL11 RGB 198 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver 199 as a module, choose M here. 200 201config DRM_PANEL_NOVATEK_NT35510 202 tristate "Novatek NT35510 RGB panel driver" 203 depends on OF 204 depends on DRM_MIPI_DSI 205 depends on BACKLIGHT_CLASS_DEVICE 206 help 207 Say Y here if you want to enable support for the panels built 208 around the Novatek NT35510 display controller, such as some 209 Hydis panels. 210 211config DRM_PANEL_NOVATEK_NT39016 212 tristate "Novatek NT39016 RGB/SPI panel" 213 depends on OF && SPI 214 depends on BACKLIGHT_CLASS_DEVICE 215 select REGMAP_SPI 216 help 217 Say Y here if you want to enable support for the panels built 218 around the Novatek NT39016 display controller. 219 220config DRM_PANEL_MANTIX_MLAF057WE51 221 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" 222 depends on OF 223 depends on DRM_MIPI_DSI 224 depends on BACKLIGHT_CLASS_DEVICE 225 help 226 Say Y here if you want to enable support for the Mantix 227 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It 228 has a resolution of 720x1440 pixels, a built in backlight and touch 229 controller. 230 231config DRM_PANEL_OLIMEX_LCD_OLINUXINO 232 tristate "Olimex LCD-OLinuXino panel" 233 depends on OF 234 depends on I2C 235 depends on BACKLIGHT_CLASS_DEVICE 236 help 237 The panel is used with different sizes LCDs, from 480x272 to 238 1280x800, and 24 bit per pixel. 239 240 Say Y here if you want to enable support for Olimex Ltd. 241 LCD-OLinuXino panel. 242 243config DRM_PANEL_ORISETECH_OTM8009A 244 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" 245 depends on OF 246 depends on DRM_MIPI_DSI 247 depends on BACKLIGHT_CLASS_DEVICE 248 help 249 Say Y here if you want to enable support for Orise Technology 250 otm8009a 480x800 dsi 2dl panel. 251 252config DRM_PANEL_OSD_OSD101T2587_53TS 253 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" 254 depends on OF 255 depends on DRM_MIPI_DSI 256 depends on BACKLIGHT_CLASS_DEVICE 257 help 258 Say Y here if you want to enable support for One Stop Displays 259 OSD101T2587-53TS 10.1" 1920x1200 dsi panel. 260 261config DRM_PANEL_PANASONIC_VVX10F034N00 262 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" 263 depends on OF 264 depends on DRM_MIPI_DSI 265 depends on BACKLIGHT_CLASS_DEVICE 266 help 267 Say Y here if you want to enable support for Panasonic VVX10F034N00 268 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some 269 Xperia Z2 tablets 270 271config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN 272 tristate "Raspberry Pi 7-inch touchscreen panel" 273 depends on DRM_MIPI_DSI 274 help 275 Say Y here if you want to enable support for the Raspberry 276 Pi 7" Touchscreen. To compile this driver as a module, 277 choose M here. 278 279config DRM_PANEL_RAYDIUM_RM67191 280 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" 281 depends on OF 282 depends on DRM_MIPI_DSI 283 depends on BACKLIGHT_CLASS_DEVICE 284 help 285 Say Y here if you want to enable support for Raydium RM67191 FHD 286 (1080x1920) DSI panel. 287 288config DRM_PANEL_RAYDIUM_RM68200 289 tristate "Raydium RM68200 720x1280 DSI video mode panel" 290 depends on OF 291 depends on DRM_MIPI_DSI 292 depends on BACKLIGHT_CLASS_DEVICE 293 help 294 Say Y here if you want to enable support for Raydium RM68200 295 720x1280 DSI video mode panel. 296 297config DRM_PANEL_RONBO_RB070D30 298 tristate "Ronbo Electronics RB070D30 panel" 299 depends on OF 300 depends on DRM_MIPI_DSI 301 depends on BACKLIGHT_CLASS_DEVICE 302 help 303 Say Y here if you want to enable support for Ronbo Electronics 304 RB070D30 1024x600 DSI panel. 305 306config DRM_PANEL_SAMSUNG_S6D16D0 307 tristate "Samsung S6D16D0 DSI video mode panel" 308 depends on OF 309 depends on DRM_MIPI_DSI 310 select VIDEOMODE_HELPERS 311 312config DRM_PANEL_SAMSUNG_S6E3HA2 313 tristate "Samsung S6E3HA2 DSI video mode panel" 314 depends on OF 315 depends on DRM_MIPI_DSI 316 depends on BACKLIGHT_CLASS_DEVICE 317 select VIDEOMODE_HELPERS 318 319config DRM_PANEL_SAMSUNG_S6E63J0X03 320 tristate "Samsung S6E63J0X03 DSI command mode panel" 321 depends on OF 322 depends on DRM_MIPI_DSI 323 depends on BACKLIGHT_CLASS_DEVICE 324 select VIDEOMODE_HELPERS 325 326config DRM_PANEL_SAMSUNG_S6E63M0 327 tristate "Samsung S6E63M0 RGB panel" 328 depends on OF 329 depends on BACKLIGHT_CLASS_DEVICE 330 help 331 Say Y here if you want to enable support for Samsung S6E63M0 332 AMOLED LCD panel. This panel can be accessed using SPI or 333 DSI. 334 335config DRM_PANEL_SAMSUNG_S6E63M0_SPI 336 tristate "Samsung S6E63M0 RGB SPI interface" 337 depends on SPI 338 depends on DRM_PANEL_SAMSUNG_S6E63M0 339 default DRM_PANEL_SAMSUNG_S6E63M0 340 help 341 Say Y here if you want to be able to access the Samsung 342 S6E63M0 panel using SPI. 343 344config DRM_PANEL_SAMSUNG_S6E63M0_DSI 345 tristate "Samsung S6E63M0 RGB DSI interface" 346 depends on DRM_MIPI_DSI 347 depends on DRM_PANEL_SAMSUNG_S6E63M0 348 help 349 Say Y here if you want to be able to access the Samsung 350 S6E63M0 panel using DSI. 351 352config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 353 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" 354 depends on OF 355 select DRM_MIPI_DSI 356 select VIDEOMODE_HELPERS 357 358config DRM_PANEL_SAMSUNG_S6E8AA0 359 tristate "Samsung S6E8AA0 DSI video mode panel" 360 depends on OF 361 select DRM_MIPI_DSI 362 select VIDEOMODE_HELPERS 363 364config DRM_PANEL_SEIKO_43WVF1G 365 tristate "Seiko 43WVF1G panel" 366 depends on OF 367 depends on BACKLIGHT_CLASS_DEVICE 368 select VIDEOMODE_HELPERS 369 help 370 Say Y here if you want to enable support for the Seiko 371 43WVF1G controller for 800x480 LCD panels 372 373config DRM_PANEL_SHARP_LQ101R1SX01 374 tristate "Sharp LQ101R1SX01 panel" 375 depends on OF 376 depends on DRM_MIPI_DSI 377 depends on BACKLIGHT_CLASS_DEVICE 378 help 379 Say Y here if you want to enable support for Sharp LQ101R1SX01 380 TFT-LCD modules. The panel has a 2560x1600 resolution and uses 381 24 bit RGB per pixel. It provides a dual MIPI DSI interface to 382 the host and has a built-in LED backlight. 383 384 To compile this driver as a module, choose M here: the module 385 will be called panel-sharp-lq101r1sx01. 386 387config DRM_PANEL_SHARP_LS037V7DW01 388 tristate "Sharp LS037V7DW01 VGA LCD panel" 389 depends on GPIOLIB && OF && REGULATOR 390 help 391 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA 392 (480x640) LCD panel (found on the TI SDP3430 board). 393 394config DRM_PANEL_SHARP_LS043T1LE01 395 tristate "Sharp LS043T1LE01 qHD video mode panel" 396 depends on OF 397 depends on DRM_MIPI_DSI 398 depends on BACKLIGHT_CLASS_DEVICE 399 help 400 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD 401 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard 402 403config DRM_PANEL_SITRONIX_ST7701 404 tristate "Sitronix ST7701 panel driver" 405 depends on OF 406 depends on DRM_MIPI_DSI 407 depends on BACKLIGHT_CLASS_DEVICE 408 help 409 Say Y here if you want to enable support for the Sitronix 410 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI 411 system interfaces. 412 413config DRM_PANEL_SITRONIX_ST7703 414 tristate "Sitronix ST7703 based MIPI touchscreen panels" 415 depends on OF 416 depends on DRM_MIPI_DSI 417 depends on BACKLIGHT_CLASS_DEVICE 418 help 419 Say Y here if you want to enable support for Sitronix ST7703 based 420 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in 421 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built 422 in backlight and touch controller. 423 Touch input support is provided by the goodix driver and needs to be 424 selected separately. 425 426config DRM_PANEL_SITRONIX_ST7789V 427 tristate "Sitronix ST7789V panel" 428 depends on OF && SPI 429 depends on BACKLIGHT_CLASS_DEVICE 430 help 431 Say Y here if you want to enable support for the Sitronix 432 ST7789V controller for 240x320 LCD panels 433 434config DRM_PANEL_SONY_ACX424AKP 435 tristate "Sony ACX424AKP DSI command mode panel" 436 depends on OF 437 depends on DRM_MIPI_DSI 438 depends on BACKLIGHT_CLASS_DEVICE 439 select VIDEOMODE_HELPERS 440 help 441 Say Y here if you want to enable the Sony ACX424 display 442 panel. This panel supports DSI in both command and video 443 mode. 444 445config DRM_PANEL_SONY_ACX565AKM 446 tristate "Sony ACX565AKM panel" 447 depends on GPIOLIB && OF && SPI 448 depends on BACKLIGHT_CLASS_DEVICE 449 help 450 Say Y here if you want to enable support for the Sony ACX565AKM 451 800x600 3.5" panel (found on the Nokia N900). 452 453config DRM_PANEL_TPO_TD028TTEC1 454 tristate "Toppoly (TPO) TD028TTEC1 panel driver" 455 depends on OF && SPI 456 depends on BACKLIGHT_CLASS_DEVICE 457 help 458 Say Y here if you want to enable support for TPO TD028TTEC1 480x640 459 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973). 460 461config DRM_PANEL_TPO_TD043MTEA1 462 tristate "Toppoly (TPO) TD043MTEA1 panel driver" 463 depends on GPIOLIB && OF && REGULATOR && SPI 464 help 465 Say Y here if you want to enable support for TPO TD043MTEA1 800x480 466 4.3" panel (found on the OMAP3 Pandora board). 467 468config DRM_PANEL_TPO_TPG110 469 tristate "TPO TPG 800x400 panel" 470 depends on OF && SPI && GPIOLIB 471 depends on BACKLIGHT_CLASS_DEVICE 472 help 473 Say Y here if you want to enable support for TPO TPG110 474 400CH LTPS TFT LCD Single Chip Digital Driver for up to 475 800x400 LCD panels. 476 477config DRM_PANEL_TRULY_NT35597_WQXGA 478 tristate "Truly WQXGA" 479 depends on OF 480 depends on DRM_MIPI_DSI 481 help 482 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI 483 Video Mode panel 484 485config DRM_PANEL_VISIONOX_RM69299 486 tristate "Visionox RM69299" 487 depends on OF 488 depends on DRM_MIPI_DSI 489 help 490 Say Y here if you want to enable support for Visionox 491 RM69299 DSI Video Mode panel. 492 493config DRM_PANEL_XINPENG_XPP055C272 494 tristate "Xinpeng XPP055C272 panel driver" 495 depends on OF 496 depends on DRM_MIPI_DSI 497 depends on BACKLIGHT_CLASS_DEVICE 498 help 499 Say Y here if you want to enable support for the Xinpeng 500 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI 501 system interfaces. 502endmenu 503