xref: /openbmc/linux/drivers/gpu/drm/panel/Kconfig (revision d0931f1d) 
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ABT_Y030XX067A
12	tristate "ABT Y030XX067A 320x480 LCD panel"
13	depends on OF && SPI
14	select REGMAP_SPI
15	help
16	  Say Y here to enable support for the Asia Better Technology Ltd.
17	  Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18	  and RG-99 handheld gaming consoles.
19
20config DRM_PANEL_ARM_VERSATILE
21	tristate "ARM Versatile panel driver"
22	depends on OF
23	depends on MFD_SYSCON
24	select VIDEOMODE_HELPERS
25	help
26	  This driver supports the ARM Versatile panels connected to ARM
27	  reference designs. The panel is detected using special registers
28	  in the Versatile family syscon registers.
29
30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31	tristate "ASUS Z00T TM5P5 NT35596 panel"
32	depends on GPIOLIB && OF
33	depends on DRM_MIPI_DSI
34	depends on BACKLIGHT_CLASS_DEVICE
35	help
36	  Say Y here if you want to enable support for the ASUS TMP5P5
37	  NT35596 1080x1920 video mode panel as found in some Asus
38	  Zenfone 2 Laser Z00T devices.
39
40config DRM_PANEL_BOE_BF060Y8M_AJ0
41	tristate "Boe BF060Y8M-AJ0 panel"
42	depends on OF
43	depends on DRM_MIPI_DSI
44	depends on BACKLIGHT_CLASS_DEVICE
45	help
46	  Say Y here if you want to enable support for Boe BF060Y8M-AJ0
47	  5.99" AMOLED modules. The panel has a 1080x2160 resolution and
48	  uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
49	  the host and backlight is controlled through DSI commands.
50
51config DRM_PANEL_BOE_HIMAX8279D
52	tristate "Boe Himax8279d panel"
53	depends on OF
54	depends on DRM_MIPI_DSI
55	depends on BACKLIGHT_CLASS_DEVICE
56	help
57	  Say Y here if you want to enable support for Boe Himax8279d
58	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
59	  24 bit RGB per pixel. It provides a MIPI DSI interface to
60	  the host and has a built-in LED backlight.
61
62config DRM_PANEL_BOE_TV101WUM_NL6
63	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
64	depends on OF
65	depends on DRM_MIPI_DSI
66	depends on BACKLIGHT_CLASS_DEVICE
67	help
68	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
69	  45NA WUXGA PANEL DSI Video Mode panel
70
71config DRM_PANEL_DSI_CM
72	tristate "Generic DSI command mode panels"
73	depends on OF
74	depends on DRM_MIPI_DSI
75	depends on BACKLIGHT_CLASS_DEVICE
76	help
77	  DRM panel driver for DSI command mode panels with support for
78	  embedded and external backlights.
79
80config DRM_PANEL_LVDS
81	tristate "Generic LVDS panel driver"
82	depends on OF
83	depends on BACKLIGHT_CLASS_DEVICE
84	select VIDEOMODE_HELPERS
85	help
86	  This driver supports LVDS panels that don't require device-specific
87	  handling of power supplies or control signals. It implements automatic
88	  backlight handling if the panel is attached to a backlight controller.
89
90config DRM_PANEL_SIMPLE
91	tristate "support for simple panels (other than eDP ones)"
92	depends on OF
93	depends on BACKLIGHT_CLASS_DEVICE
94	depends on PM
95	select VIDEOMODE_HELPERS
96	help
97	  DRM panel driver for dumb non-eDP panels that need at most a regulator
98	  and a GPIO to be powered up. Optionally a backlight can be attached so
99	  that it can be automatically turned off when the panel goes into a
100	  low power state.
101
102config DRM_PANEL_EDP
103	tristate "support for simple Embedded DisplayPort panels"
104	depends on OF
105	depends on BACKLIGHT_CLASS_DEVICE
106	depends on PM
107	select VIDEOMODE_HELPERS
108	select DRM_DISPLAY_DP_HELPER
109	select DRM_DISPLAY_HELPER
110	select DRM_DP_AUX_BUS
111	select DRM_KMS_HELPER
112	help
113	  DRM panel driver for dumb eDP panels that need at most a regulator and
114	  a GPIO to be powered up. Optionally a backlight can be attached so
115	  that it can be automatically turned off when the panel goes into a
116	  low power state.
117
118config DRM_PANEL_EBBG_FT8719
119	tristate "EBBG FT8719 panel driver"
120	depends on OF
121	depends on DRM_MIPI_DSI
122	depends on BACKLIGHT_CLASS_DEVICE
123	help
124	  Say Y here if you want to enable support for the EBBG FT8719
125	  video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
126	  The panel has a resolution of 1080x2246. It provides a MIPI DSI
127	  interface to the host.
128
129config DRM_PANEL_ELIDA_KD35T133
130	tristate "Elida KD35T133 panel driver"
131	depends on OF
132	depends on DRM_MIPI_DSI
133	depends on BACKLIGHT_CLASS_DEVICE
134	help
135	  Say Y here if you want to enable support for the Elida
136	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
137	  system interfaces.
138
139config DRM_PANEL_FEIXIN_K101_IM2BA02
140	tristate "Feixin K101 IM2BA02 panel"
141	depends on OF
142	depends on DRM_MIPI_DSI
143	depends on BACKLIGHT_CLASS_DEVICE
144	help
145	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
146	  4-lane 800x1280 MIPI DSI panel.
147
148config DRM_PANEL_FEIYANG_FY07024DI26A30D
149	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
150	depends on OF
151	depends on DRM_MIPI_DSI
152	depends on BACKLIGHT_CLASS_DEVICE
153	help
154	  Say Y if you want to enable support for panels based on the
155	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
156
157config DRM_PANEL_ILITEK_IL9322
158	tristate "Ilitek ILI9322 320x240 QVGA panels"
159	depends on OF && SPI
160	select REGMAP
161	help
162	  Say Y here if you want to enable support for Ilitek IL9322
163	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
164
165config DRM_PANEL_ILITEK_ILI9341
166	tristate "Ilitek ILI9341 240x320 QVGA panels"
167	depends on OF && SPI
168	select DRM_KMS_HELPER
169	select DRM_GEM_DMA_HELPER
170	depends on BACKLIGHT_CLASS_DEVICE
171	select DRM_MIPI_DBI
172	help
173	  Say Y here if you want to enable support for Ilitek IL9341
174	  QVGA (240x320) RGB panels. support serial & parallel rgb
175	  interface.
176
177config DRM_PANEL_ILITEK_ILI9881C
178	tristate "Ilitek ILI9881C-based panels"
179	depends on OF
180	depends on DRM_MIPI_DSI
181	depends on BACKLIGHT_CLASS_DEVICE
182	help
183	  Say Y if you want to enable support for panels based on the
184	  Ilitek ILI9881c controller.
185
186config DRM_PANEL_INNOLUX_EJ030NA
187        tristate "Innolux EJ030NA 320x480 LCD panel"
188        depends on OF && SPI
189        select REGMAP_SPI
190        help
191          Say Y here to enable support for the Innolux/Chimei EJ030NA
192          320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
193          and LDK handheld gaming consoles.
194
195config DRM_PANEL_INNOLUX_P079ZCA
196	tristate "Innolux P079ZCA panel"
197	depends on OF
198	depends on DRM_MIPI_DSI
199	depends on BACKLIGHT_CLASS_DEVICE
200	help
201	  Say Y here if you want to enable support for Innolux P079ZCA
202	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
203	  24 bit RGB per pixel. It provides a MIPI DSI interface to
204	  the host and has a built-in LED backlight.
205
206config DRM_PANEL_JADARD_JD9365DA_H3
207	tristate "Jadard JD9365DA-H3 WXGA DSI panel"
208	depends on OF
209	depends on DRM_MIPI_DSI
210	depends on BACKLIGHT_CLASS_DEVICE
211	help
212	  Say Y here if you want to enable support for Jadard JD9365DA-H3
213	  WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
214	  800RGBx1280 dots at maximum.
215
216config DRM_PANEL_JDI_LT070ME05000
217	tristate "JDI LT070ME05000 WUXGA DSI panel"
218	depends on OF
219	depends on DRM_MIPI_DSI
220	depends on BACKLIGHT_CLASS_DEVICE
221	help
222	  Say Y here if you want to enable support for JDI DSI video mode
223	  panel as found in Google Nexus 7 (2013) devices.
224	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
225	  24 bit per pixel.
226
227config DRM_PANEL_JDI_R63452
228	tristate "JDI R63452 Full HD DSI panel"
229	depends on OF
230	depends on DRM_MIPI_DSI
231	depends on BACKLIGHT_CLASS_DEVICE
232	help
233	  Say Y here if you want to enable support for the JDI R63452
234	  DSI command mode panel as found in Xiaomi Mi 5 Devices.
235
236config DRM_PANEL_KHADAS_TS050
237	tristate "Khadas TS050 panel"
238	depends on OF
239	depends on DRM_MIPI_DSI
240	depends on BACKLIGHT_CLASS_DEVICE
241	help
242	  Say Y here if you want to enable support for Khadas TS050 TFT-LCD
243	  panel module. The panel has a 1080x1920 resolution and uses
244	  24 bit RGB per pixel. It provides a MIPI DSI interface to
245	  the host, a built-in LED backlight and touch controller.
246
247config DRM_PANEL_KINGDISPLAY_KD097D04
248	tristate "Kingdisplay kd097d04 panel"
249	depends on OF
250	depends on DRM_MIPI_DSI
251	depends on BACKLIGHT_CLASS_DEVICE
252	help
253	  Say Y here if you want to enable support for Kingdisplay kd097d04
254	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
255	  24 bit RGB per pixel. It provides a MIPI DSI interface to
256	  the host and has a built-in LED backlight.
257
258config DRM_PANEL_LEADTEK_LTK050H3146W
259	tristate "Leadtek LTK050H3146W panel"
260	depends on OF
261	depends on DRM_MIPI_DSI
262	depends on BACKLIGHT_CLASS_DEVICE
263	help
264	  Say Y here if you want to enable support for Leadtek LTK050H3146W
265	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
266	  24 bit RGB per pixel. It provides a MIPI DSI interface to
267	  the host and has a built-in LED backlight.
268
269config DRM_PANEL_LEADTEK_LTK500HD1829
270	tristate "Leadtek LTK500HD1829 panel"
271	depends on OF
272	depends on DRM_MIPI_DSI
273	depends on BACKLIGHT_CLASS_DEVICE
274	help
275	  Say Y here if you want to enable support for Kingdisplay kd097d04
276	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
277	  24 bit RGB per pixel. It provides a MIPI DSI interface to
278	  the host and has a built-in LED backlight.
279
280config DRM_PANEL_SAMSUNG_LD9040
281	tristate "Samsung LD9040 RGB/SPI panel"
282	depends on OF && SPI
283	select VIDEOMODE_HELPERS
284
285config DRM_PANEL_LG_LB035Q02
286	tristate "LG LB035Q024573 RGB panel"
287	depends on GPIOLIB && OF && SPI
288	help
289	  Say Y here if you want to enable support for the LB035Q02 RGB panel
290	  (found on the Gumstix Overo Palo35 board). To compile this driver as
291	  a module, choose M here.
292
293config DRM_PANEL_LG_LG4573
294	tristate "LG4573 RGB/SPI panel"
295	depends on OF && SPI
296	select VIDEOMODE_HELPERS
297	help
298	  Say Y here if you want to enable support for LG4573 RGB panel.
299	  To compile this driver as a module, choose M here.
300
301config DRM_PANEL_NEC_NL8048HL11
302	tristate "NEC NL8048HL11 RGB panel"
303	depends on GPIOLIB && OF && SPI
304	help
305	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
306	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
307	  as a module, choose M here.
308
309config DRM_PANEL_NEWVISION_NV3051D
310	tristate "NewVision NV3051D DSI panel"
311	depends on OF
312	depends on DRM_MIPI_DSI
313	depends on BACKLIGHT_CLASS_DEVICE
314	help
315	  This driver supports the NV3051D based panel found on the Anbernic
316	  RG353P and RG353V.
317
318config DRM_PANEL_NEWVISION_NV3052C
319	tristate "NewVision NV3052C RGB/SPI panel"
320	depends on OF && SPI
321	depends on BACKLIGHT_CLASS_DEVICE
322	select DRM_MIPI_DBI
323	help
324	  Say Y here if you want to enable support for the panels built
325	  around the NewVision NV3052C display controller.
326
327config DRM_PANEL_NOVATEK_NT35510
328	tristate "Novatek NT35510 RGB panel driver"
329	depends on OF
330	depends on DRM_MIPI_DSI
331	depends on BACKLIGHT_CLASS_DEVICE
332	help
333	  Say Y here if you want to enable support for the panels built
334	  around the Novatek NT35510 display controller, such as some
335	  Hydis panels.
336
337config DRM_PANEL_NOVATEK_NT35560
338	tristate "Novatek NT35560 DSI command mode panel"
339	depends on OF
340	depends on DRM_MIPI_DSI
341	depends on BACKLIGHT_CLASS_DEVICE
342	select VIDEOMODE_HELPERS
343	help
344	  Say Y here if you want to enable the Novatek NT35560 display
345	  controller. This panel supports DSI in both command and video
346	  mode. This supports several panels such as Sony ACX424AKM and
347	  ACX424AKP.
348
349config DRM_PANEL_NOVATEK_NT35950
350	tristate "Novatek NT35950 DSI panel"
351	depends on OF
352	depends on DRM_MIPI_DSI
353	depends on BACKLIGHT_CLASS_DEVICE
354	help
355	  Say Y here if you want to enable support for the panels built
356	  around the Novatek NT35950 display controller, such as some
357	  Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
358	  mobile phones.
359
360config DRM_PANEL_NOVATEK_NT36672A
361	tristate "Novatek NT36672A DSI panel"
362	depends on OF
363	depends on DRM_MIPI_DSI
364	depends on BACKLIGHT_CLASS_DEVICE
365	help
366	  Say Y here if you want to enable support for the panels built
367	  around the Novatek NT36672A display controller, such as some
368	  Tianma panels used in a few Xiaomi Poco F1 mobile phones.
369
370config DRM_PANEL_NOVATEK_NT39016
371	tristate "Novatek NT39016 RGB/SPI panel"
372	depends on OF && SPI
373	depends on BACKLIGHT_CLASS_DEVICE
374	select REGMAP_SPI
375	help
376	  Say Y here if you want to enable support for the panels built
377	  around the Novatek NT39016 display controller.
378
379config DRM_PANEL_MANTIX_MLAF057WE51
380	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
381	depends on OF
382	depends on DRM_MIPI_DSI
383	depends on BACKLIGHT_CLASS_DEVICE
384	help
385	  Say Y here if you want to enable support for the Mantix
386	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
387	  has a resolution of 720x1440 pixels, a built in backlight and touch
388	  controller.
389
390config DRM_PANEL_OLIMEX_LCD_OLINUXINO
391	tristate "Olimex LCD-OLinuXino panel"
392	depends on OF
393	depends on I2C
394	depends on BACKLIGHT_CLASS_DEVICE
395	select CRC32
396	help
397	  The panel is used with different sizes LCDs, from 480x272 to
398	  1280x800, and 24 bit per pixel.
399
400	  Say Y here if you want to enable support for Olimex Ltd.
401	  LCD-OLinuXino panel.
402
403config DRM_PANEL_ORISETECH_OTM8009A
404	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
405	depends on OF
406	depends on DRM_MIPI_DSI
407	depends on BACKLIGHT_CLASS_DEVICE
408	help
409	  Say Y here if you want to enable support for Orise Technology
410	  otm8009a 480x800 dsi 2dl panel.
411
412config DRM_PANEL_OSD_OSD101T2587_53TS
413	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
414	depends on OF
415	depends on DRM_MIPI_DSI
416	depends on BACKLIGHT_CLASS_DEVICE
417	help
418	  Say Y here if you want to enable support for One Stop Displays
419	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
420
421config DRM_PANEL_PANASONIC_VVX10F034N00
422	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
423	depends on OF
424	depends on DRM_MIPI_DSI
425	depends on BACKLIGHT_CLASS_DEVICE
426	help
427	  Say Y here if you want to enable support for Panasonic VVX10F034N00
428	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
429	  Xperia Z2 tablets
430
431config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
432	tristate "Raspberry Pi 7-inch touchscreen panel"
433	depends on DRM_MIPI_DSI
434	help
435	  Say Y here if you want to enable support for the Raspberry
436	  Pi 7" Touchscreen.  To compile this driver as a module,
437	  choose M here.
438
439config DRM_PANEL_RAYDIUM_RM67191
440	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
441	depends on OF
442	depends on DRM_MIPI_DSI
443	depends on BACKLIGHT_CLASS_DEVICE
444	help
445	  Say Y here if you want to enable support for Raydium RM67191 FHD
446	  (1080x1920) DSI panel.
447
448config DRM_PANEL_RAYDIUM_RM68200
449	tristate "Raydium RM68200 720x1280 DSI video mode panel"
450	depends on OF
451	depends on DRM_MIPI_DSI
452	depends on BACKLIGHT_CLASS_DEVICE
453	help
454	  Say Y here if you want to enable support for Raydium RM68200
455	  720x1280 DSI video mode panel.
456
457config DRM_PANEL_RONBO_RB070D30
458	tristate "Ronbo Electronics RB070D30 panel"
459	depends on OF
460	depends on DRM_MIPI_DSI
461	depends on BACKLIGHT_CLASS_DEVICE
462	help
463	  Say Y here if you want to enable support for Ronbo Electronics
464	  RB070D30 1024x600 DSI panel.
465
466config DRM_PANEL_SAMSUNG_ATNA33XC20
467	tristate "Samsung ATNA33XC20 eDP panel"
468	depends on OF
469	depends on BACKLIGHT_CLASS_DEVICE
470	depends on PM
471	select DRM_DISPLAY_DP_HELPER
472	select DRM_DISPLAY_HELPER
473	select DRM_DP_AUX_BUS
474	help
475	  DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
476	  be handled by the DRM_PANEL_SIMPLE driver because its power
477	  sequencing is non-standard.
478
479config DRM_PANEL_SAMSUNG_DB7430
480	tristate "Samsung DB7430-based DPI panels"
481	depends on OF && SPI && GPIOLIB
482	depends on BACKLIGHT_CLASS_DEVICE
483	select DRM_MIPI_DBI
484	help
485	  Say Y here if you want to enable support for the Samsung
486	  DB7430 DPI display controller used in such devices as the
487	  LMS397KF04 480x800 DPI panel.
488
489config DRM_PANEL_SAMSUNG_S6D16D0
490	tristate "Samsung S6D16D0 DSI video mode panel"
491	depends on OF
492	depends on DRM_MIPI_DSI
493	select VIDEOMODE_HELPERS
494
495config DRM_PANEL_SAMSUNG_S6D27A1
496	tristate "Samsung S6D27A1 DPI panel driver"
497	depends on OF && SPI && GPIOLIB
498	select DRM_MIPI_DBI
499	help
500	  Say Y here if you want to enable support for the Samsung
501	  S6D27A1 DPI 480x800 panel.
502
503	  This panel can be found in Samsung Galaxy Ace 2
504	  GT-I8160 mobile phone.
505
506config DRM_PANEL_SAMSUNG_S6E3HA2
507	tristate "Samsung S6E3HA2 DSI video mode panel"
508	depends on OF
509	depends on DRM_MIPI_DSI
510	depends on BACKLIGHT_CLASS_DEVICE
511	select VIDEOMODE_HELPERS
512
513config DRM_PANEL_SAMSUNG_S6E63J0X03
514	tristate "Samsung S6E63J0X03 DSI command mode panel"
515	depends on OF
516	depends on DRM_MIPI_DSI
517	depends on BACKLIGHT_CLASS_DEVICE
518	select VIDEOMODE_HELPERS
519
520config DRM_PANEL_SAMSUNG_S6E63M0
521	tristate "Samsung S6E63M0 RGB panel"
522	depends on OF
523	depends on BACKLIGHT_CLASS_DEVICE
524	help
525	  Say Y here if you want to enable support for Samsung S6E63M0
526	  AMOLED LCD panel. This panel can be accessed using SPI or
527	  DSI.
528
529config DRM_PANEL_SAMSUNG_S6E63M0_SPI
530	tristate "Samsung S6E63M0 RGB SPI interface"
531	depends on SPI
532	depends on DRM_PANEL_SAMSUNG_S6E63M0
533	default DRM_PANEL_SAMSUNG_S6E63M0
534	select DRM_MIPI_DBI
535	help
536	  Say Y here if you want to be able to access the Samsung
537	  S6E63M0 panel using SPI.
538
539config DRM_PANEL_SAMSUNG_S6E63M0_DSI
540	tristate "Samsung S6E63M0 RGB DSI interface"
541	depends on DRM_MIPI_DSI
542	depends on DRM_PANEL_SAMSUNG_S6E63M0
543	help
544	  Say Y here if you want to be able to access the Samsung
545	  S6E63M0 panel using DSI.
546
547config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
548	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
549	depends on OF
550	select DRM_MIPI_DSI
551	select VIDEOMODE_HELPERS
552
553config DRM_PANEL_SAMSUNG_S6E8AA0
554	tristate "Samsung S6E8AA0 DSI video mode panel"
555	depends on OF
556	select DRM_MIPI_DSI
557	select VIDEOMODE_HELPERS
558
559config DRM_PANEL_SAMSUNG_SOFEF00
560	tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
561	depends on OF
562	depends on DRM_MIPI_DSI
563	depends on BACKLIGHT_CLASS_DEVICE
564	select VIDEOMODE_HELPERS
565	help
566	  Say Y or M here if you want to enable support for the Samsung AMOLED
567	  command mode panels found in the OnePlus 6/6T smartphones.
568
569	  The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
570
571config DRM_PANEL_SEIKO_43WVF1G
572	tristate "Seiko 43WVF1G panel"
573	depends on OF
574	depends on BACKLIGHT_CLASS_DEVICE
575	select VIDEOMODE_HELPERS
576	help
577	  Say Y here if you want to enable support for the Seiko
578	  43WVF1G controller for 800x480 LCD panels
579
580config DRM_PANEL_SHARP_LQ101R1SX01
581	tristate "Sharp LQ101R1SX01 panel"
582	depends on OF
583	depends on DRM_MIPI_DSI
584	depends on BACKLIGHT_CLASS_DEVICE
585	help
586	  Say Y here if you want to enable support for Sharp LQ101R1SX01
587	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
588	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
589	  the host and has a built-in LED backlight.
590
591	  To compile this driver as a module, choose M here: the module
592	  will be called panel-sharp-lq101r1sx01.
593
594config DRM_PANEL_SHARP_LS037V7DW01
595	tristate "Sharp LS037V7DW01 VGA LCD panel"
596	depends on GPIOLIB && OF && REGULATOR
597	help
598	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
599	  (480x640) LCD panel (found on the TI SDP3430 board).
600
601config DRM_PANEL_SHARP_LS043T1LE01
602	tristate "Sharp LS043T1LE01 qHD video mode panel"
603	depends on OF
604	depends on DRM_MIPI_DSI
605	depends on BACKLIGHT_CLASS_DEVICE
606	help
607	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
608	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
609
610config DRM_PANEL_SHARP_LS060T1SX01
611	tristate "Sharp LS060T1SX01 FullHD video mode panel"
612	depends on OF
613	depends on DRM_MIPI_DSI
614	depends on BACKLIGHT_CLASS_DEVICE
615	help
616	  Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
617	  FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
618	  Bundle.
619
620config DRM_PANEL_SITRONIX_ST7701
621	tristate "Sitronix ST7701 panel driver"
622	depends on OF
623	depends on DRM_MIPI_DSI
624	depends on BACKLIGHT_CLASS_DEVICE
625	help
626	  Say Y here if you want to enable support for the Sitronix
627	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
628	  system interfaces.
629
630config DRM_PANEL_SITRONIX_ST7703
631	tristate "Sitronix ST7703 based MIPI touchscreen panels"
632	depends on OF
633	depends on DRM_MIPI_DSI
634	depends on BACKLIGHT_CLASS_DEVICE
635	help
636	  Say Y here if you want to enable support for Sitronix ST7703 based
637	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
638	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
639	  in backlight and touch controller.
640	  Touch input support is provided by the goodix driver and needs to be
641	  selected separately.
642
643config DRM_PANEL_SITRONIX_ST7789V
644	tristate "Sitronix ST7789V panel"
645	depends on OF && SPI
646	depends on BACKLIGHT_CLASS_DEVICE
647	help
648	  Say Y here if you want to enable support for the Sitronix
649	  ST7789V controller for 240x320 LCD panels
650
651config DRM_PANEL_SONY_ACX565AKM
652	tristate "Sony ACX565AKM panel"
653	depends on GPIOLIB && OF && SPI
654	depends on BACKLIGHT_CLASS_DEVICE
655	help
656	  Say Y here if you want to enable support for the Sony ACX565AKM
657	  800x600 3.5" panel (found on the Nokia N900).
658
659config DRM_PANEL_SONY_TULIP_TRULY_NT35521
660	tristate "Sony Tulip Truly NT35521 panel"
661	depends on GPIOLIB && OF
662	depends on DRM_MIPI_DSI
663	depends on BACKLIGHT_CLASS_DEVICE
664	help
665	  Say Y here if you want to enable support for the Sony Tulip
666	  NT35521 1280x720 video mode panel as found on Sony Xperia M4
667	  Aqua phone.
668
669config DRM_PANEL_TDO_TL070WSH30
670	tristate "TDO TL070WSH30 DSI panel"
671	depends on OF
672	depends on DRM_MIPI_DSI
673	depends on BACKLIGHT_CLASS_DEVICE
674	help
675	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
676	  panel module. The panel has a 1024×600 resolution and uses
677	  24 bit RGB per pixel. It provides a MIPI DSI interface to
678	  the host, a built-in LED backlight and touch controller.
679
680config DRM_PANEL_TPO_TD028TTEC1
681	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
682	depends on OF && SPI
683	depends on BACKLIGHT_CLASS_DEVICE
684	help
685	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
686	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
687
688config DRM_PANEL_TPO_TD043MTEA1
689	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
690	depends on GPIOLIB && OF && REGULATOR && SPI
691	help
692	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
693	  4.3" panel (found on the OMAP3 Pandora board).
694
695config DRM_PANEL_TPO_TPG110
696	tristate "TPO TPG 800x400 panel"
697	depends on OF && SPI && GPIOLIB
698	depends on BACKLIGHT_CLASS_DEVICE
699	help
700	  Say Y here if you want to enable support for TPO TPG110
701	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
702	  800x400 LCD panels.
703
704config DRM_PANEL_TRULY_NT35597_WQXGA
705	tristate "Truly WQXGA"
706	depends on OF
707	depends on DRM_MIPI_DSI
708	help
709	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
710	  Video Mode panel
711
712config DRM_PANEL_VISIONOX_RM69299
713	tristate "Visionox RM69299"
714	depends on OF
715	depends on DRM_MIPI_DSI
716	help
717	  Say Y here if you want to enable support for Visionox
718	  RM69299  DSI Video Mode panel.
719
720config DRM_PANEL_WIDECHIPS_WS2401
721	tristate "Widechips WS2401 DPI panel driver"
722	depends on SPI && GPIOLIB
723	depends on BACKLIGHT_CLASS_DEVICE
724	select DRM_MIPI_DBI
725	help
726	  Say Y here if you want to enable support for the Widechips WS2401 DPI
727	  480x800 display controller used in panels such as Samsung LMS380KF01.
728	  This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
729
730config DRM_PANEL_XINPENG_XPP055C272
731	tristate "Xinpeng XPP055C272 panel driver"
732	depends on OF
733	depends on DRM_MIPI_DSI
734	depends on BACKLIGHT_CLASS_DEVICE
735	help
736	  Say Y here if you want to enable support for the Xinpeng
737	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
738	  system interfaces.
739endmenu
740