xref: /openbmc/linux/drivers/gpu/drm/panel/Kconfig (revision bbb774d9) 
1# SPDX-License-Identifier: GPL-2.0-only
2config DRM_PANEL
3	bool
4	depends on DRM
5	help
6	  Panel registration and lookup framework.
7
8menu "Display Panels"
9	depends on DRM && DRM_PANEL
10
11config DRM_PANEL_ABT_Y030XX067A
12	tristate "ABT Y030XX067A 320x480 LCD panel"
13	depends on OF && SPI
14	select REGMAP_SPI
15	help
16	  Say Y here to enable support for the Asia Better Technology Ltd.
17	  Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300
18	  and RG-99 handheld gaming consoles.
19
20config DRM_PANEL_ARM_VERSATILE
21	tristate "ARM Versatile panel driver"
22	depends on OF
23	depends on MFD_SYSCON
24	select VIDEOMODE_HELPERS
25	help
26	  This driver supports the ARM Versatile panels connected to ARM
27	  reference designs. The panel is detected using special registers
28	  in the Versatile family syscon registers.
29
30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596
31	tristate "ASUS Z00T TM5P5 NT35596 panel"
32	depends on GPIOLIB && OF
33	depends on DRM_MIPI_DSI
34	depends on BACKLIGHT_CLASS_DEVICE
35	help
36	  Say Y here if you want to enable support for the ASUS TMP5P5
37	  NT35596 1080x1920 video mode panel as found in some Asus
38	  Zenfone 2 Laser Z00T devices.
39
40config DRM_PANEL_BOE_BF060Y8M_AJ0
41	tristate "Boe BF060Y8M-AJ0 panel"
42	depends on OF
43	depends on DRM_MIPI_DSI
44	depends on BACKLIGHT_CLASS_DEVICE
45	help
46	  Say Y here if you want to enable support for Boe BF060Y8M-AJ0
47	  5.99" AMOLED modules. The panel has a 1080x2160 resolution and
48	  uses 24 bit RGB per pixel. It provides a MIPI DSI interface to
49	  the host and backlight is controlled through DSI commands.
50
51config DRM_PANEL_BOE_HIMAX8279D
52	tristate "Boe Himax8279d panel"
53	depends on OF
54	depends on DRM_MIPI_DSI
55	depends on BACKLIGHT_CLASS_DEVICE
56	help
57	  Say Y here if you want to enable support for Boe Himax8279d
58	  TFT-LCD modules. The panel has a 1200x1920 resolution and uses
59	  24 bit RGB per pixel. It provides a MIPI DSI interface to
60	  the host and has a built-in LED backlight.
61
62config DRM_PANEL_BOE_TV101WUM_NL6
63	tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel"
64	depends on OF
65	depends on DRM_MIPI_DSI
66	depends on BACKLIGHT_CLASS_DEVICE
67	help
68	  Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
69	  45NA WUXGA PANEL DSI Video Mode panel
70
71config DRM_PANEL_DSI_CM
72	tristate "Generic DSI command mode panels"
73	depends on OF
74	depends on DRM_MIPI_DSI
75	depends on BACKLIGHT_CLASS_DEVICE
76	help
77	  DRM panel driver for DSI command mode panels with support for
78	  embedded and external backlights.
79
80config DRM_PANEL_LVDS
81	tristate "Generic LVDS panel driver"
82	depends on OF
83	depends on BACKLIGHT_CLASS_DEVICE
84	select VIDEOMODE_HELPERS
85	help
86	  This driver supports LVDS panels that don't require device-specific
87	  handling of power supplies or control signals. It implements automatic
88	  backlight handling if the panel is attached to a backlight controller.
89
90config DRM_PANEL_SIMPLE
91	tristate "support for simple panels (other than eDP ones)"
92	depends on OF
93	depends on BACKLIGHT_CLASS_DEVICE
94	depends on PM
95	select VIDEOMODE_HELPERS
96	help
97	  DRM panel driver for dumb non-eDP panels that need at most a regulator
98	  and a GPIO to be powered up. Optionally a backlight can be attached so
99	  that it can be automatically turned off when the panel goes into a
100	  low power state.
101
102config DRM_PANEL_EDP
103	tristate "support for simple Embedded DisplayPort panels"
104	depends on OF
105	depends on BACKLIGHT_CLASS_DEVICE
106	depends on PM
107	select VIDEOMODE_HELPERS
108	select DRM_DISPLAY_DP_HELPER
109	select DRM_DISPLAY_HELPER
110	select DRM_DP_AUX_BUS
111	select DRM_KMS_HELPER
112	help
113	  DRM panel driver for dumb eDP panels that need at most a regulator and
114	  a GPIO to be powered up. Optionally a backlight can be attached so
115	  that it can be automatically turned off when the panel goes into a
116	  low power state.
117
118config DRM_PANEL_EBBG_FT8719
119	tristate "EBBG FT8719 panel driver"
120	depends on OF
121	depends on DRM_MIPI_DSI
122	depends on BACKLIGHT_CLASS_DEVICE
123	help
124	  Say Y here if you want to enable support for the EBBG FT8719
125	  video mode panel. Mainly found on Xiaomi Poco F1 mobile phone.
126	  The panel has a resolution of 1080x2246. It provides a MIPI DSI
127	  interface to the host.
128
129config DRM_PANEL_ELIDA_KD35T133
130	tristate "Elida KD35T133 panel driver"
131	depends on OF
132	depends on DRM_MIPI_DSI
133	depends on BACKLIGHT_CLASS_DEVICE
134	help
135	  Say Y here if you want to enable support for the Elida
136	  KD35T133 controller for 320x480 LCD panels with MIPI-DSI
137	  system interfaces.
138
139config DRM_PANEL_FEIXIN_K101_IM2BA02
140	tristate "Feixin K101 IM2BA02 panel"
141	depends on OF
142	depends on DRM_MIPI_DSI
143	depends on BACKLIGHT_CLASS_DEVICE
144	help
145	  Say Y here if you want to enable support for the Feixin K101 IM2BA02
146	  4-lane 800x1280 MIPI DSI panel.
147
148config DRM_PANEL_FEIYANG_FY07024DI26A30D
149	tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
150	depends on OF
151	depends on DRM_MIPI_DSI
152	depends on BACKLIGHT_CLASS_DEVICE
153	help
154	  Say Y if you want to enable support for panels based on the
155	  Feiyang FY07024DI26A30-D MIPI-DSI interface.
156
157config DRM_PANEL_ILITEK_IL9322
158	tristate "Ilitek ILI9322 320x240 QVGA panels"
159	depends on OF && SPI
160	select REGMAP
161	help
162	  Say Y here if you want to enable support for Ilitek IL9322
163	  QVGA (320x240) RGB, YUV and ITU-T BT.656 panels.
164
165config DRM_PANEL_ILITEK_ILI9341
166	tristate "Ilitek ILI9341 240x320 QVGA panels"
167	depends on OF && SPI
168	depends on DRM_KMS_HELPER
169	depends on DRM_GEM_CMA_HELPER
170	depends on BACKLIGHT_CLASS_DEVICE
171	select DRM_MIPI_DBI
172	help
173	  Say Y here if you want to enable support for Ilitek IL9341
174	  QVGA (240x320) RGB panels. support serial & parallel rgb
175	  interface.
176
177config DRM_PANEL_ILITEK_ILI9881C
178	tristate "Ilitek ILI9881C-based panels"
179	depends on OF
180	depends on DRM_MIPI_DSI
181	depends on BACKLIGHT_CLASS_DEVICE
182	help
183	  Say Y if you want to enable support for panels based on the
184	  Ilitek ILI9881c controller.
185
186config DRM_PANEL_INNOLUX_EJ030NA
187        tristate "Innolux EJ030NA 320x480 LCD panel"
188        depends on OF && SPI
189        select REGMAP_SPI
190        help
191          Say Y here to enable support for the Innolux/Chimei EJ030NA
192          320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips)
193          and LDK handheld gaming consoles.
194
195config DRM_PANEL_INNOLUX_P079ZCA
196	tristate "Innolux P079ZCA panel"
197	depends on OF
198	depends on DRM_MIPI_DSI
199	depends on BACKLIGHT_CLASS_DEVICE
200	help
201	  Say Y here if you want to enable support for Innolux P079ZCA
202	  TFT-LCD modules. The panel has a 1024x768 resolution and uses
203	  24 bit RGB per pixel. It provides a MIPI DSI interface to
204	  the host and has a built-in LED backlight.
205
206config DRM_PANEL_JDI_LT070ME05000
207	tristate "JDI LT070ME05000 WUXGA DSI panel"
208	depends on OF
209	depends on DRM_MIPI_DSI
210	depends on BACKLIGHT_CLASS_DEVICE
211	help
212	  Say Y here if you want to enable support for JDI DSI video mode
213	  panel as found in Google Nexus 7 (2013) devices.
214	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
215	  24 bit per pixel.
216
217config DRM_PANEL_JDI_R63452
218	tristate "JDI R63452 Full HD DSI panel"
219	depends on OF
220	depends on DRM_MIPI_DSI
221	depends on BACKLIGHT_CLASS_DEVICE
222	help
223	  Say Y here if you want to enable support for the JDI R63452
224	  DSI command mode panel as found in Xiaomi Mi 5 Devices.
225
226config DRM_PANEL_KHADAS_TS050
227	tristate "Khadas TS050 panel"
228	depends on OF
229	depends on DRM_MIPI_DSI
230	depends on BACKLIGHT_CLASS_DEVICE
231	help
232	  Say Y here if you want to enable support for Khadas TS050 TFT-LCD
233	  panel module. The panel has a 1080x1920 resolution and uses
234	  24 bit RGB per pixel. It provides a MIPI DSI interface to
235	  the host, a built-in LED backlight and touch controller.
236
237config DRM_PANEL_KINGDISPLAY_KD097D04
238	tristate "Kingdisplay kd097d04 panel"
239	depends on OF
240	depends on DRM_MIPI_DSI
241	depends on BACKLIGHT_CLASS_DEVICE
242	help
243	  Say Y here if you want to enable support for Kingdisplay kd097d04
244	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
245	  24 bit RGB per pixel. It provides a MIPI DSI interface to
246	  the host and has a built-in LED backlight.
247
248config DRM_PANEL_LEADTEK_LTK050H3146W
249	tristate "Leadtek LTK050H3146W panel"
250	depends on OF
251	depends on DRM_MIPI_DSI
252	depends on BACKLIGHT_CLASS_DEVICE
253	help
254	  Say Y here if you want to enable support for Leadtek LTK050H3146W
255	  TFT-LCD modules. The panel has a 720x1280 resolution and uses
256	  24 bit RGB per pixel. It provides a MIPI DSI interface to
257	  the host and has a built-in LED backlight.
258
259config DRM_PANEL_LEADTEK_LTK500HD1829
260	tristate "Leadtek LTK500HD1829 panel"
261	depends on OF
262	depends on DRM_MIPI_DSI
263	depends on BACKLIGHT_CLASS_DEVICE
264	help
265	  Say Y here if you want to enable support for Kingdisplay kd097d04
266	  TFT-LCD modules. The panel has a 1536x2048 resolution and uses
267	  24 bit RGB per pixel. It provides a MIPI DSI interface to
268	  the host and has a built-in LED backlight.
269
270config DRM_PANEL_SAMSUNG_LD9040
271	tristate "Samsung LD9040 RGB/SPI panel"
272	depends on OF && SPI
273	select VIDEOMODE_HELPERS
274
275config DRM_PANEL_LG_LB035Q02
276	tristate "LG LB035Q024573 RGB panel"
277	depends on GPIOLIB && OF && SPI
278	help
279	  Say Y here if you want to enable support for the LB035Q02 RGB panel
280	  (found on the Gumstix Overo Palo35 board). To compile this driver as
281	  a module, choose M here.
282
283config DRM_PANEL_LG_LG4573
284	tristate "LG4573 RGB/SPI panel"
285	depends on OF && SPI
286	select VIDEOMODE_HELPERS
287	help
288	  Say Y here if you want to enable support for LG4573 RGB panel.
289	  To compile this driver as a module, choose M here.
290
291config DRM_PANEL_NEC_NL8048HL11
292	tristate "NEC NL8048HL11 RGB panel"
293	depends on GPIOLIB && OF && SPI
294	help
295	  Say Y here if you want to enable support for the NEC NL8048HL11 RGB
296	  panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
297	  as a module, choose M here.
298
299config DRM_PANEL_NEWVISION_NV3052C
300	tristate "NewVision NV3052C RGB/SPI panel"
301	depends on OF && SPI
302	depends on BACKLIGHT_CLASS_DEVICE
303	select DRM_MIPI_DBI
304	help
305	  Say Y here if you want to enable support for the panels built
306	  around the NewVision NV3052C display controller.
307
308config DRM_PANEL_NOVATEK_NT35510
309	tristate "Novatek NT35510 RGB panel driver"
310	depends on OF
311	depends on DRM_MIPI_DSI
312	depends on BACKLIGHT_CLASS_DEVICE
313	help
314	  Say Y here if you want to enable support for the panels built
315	  around the Novatek NT35510 display controller, such as some
316	  Hydis panels.
317
318config DRM_PANEL_NOVATEK_NT35560
319	tristate "Novatek NT35560 DSI command mode panel"
320	depends on OF
321	depends on DRM_MIPI_DSI
322	depends on BACKLIGHT_CLASS_DEVICE
323	select VIDEOMODE_HELPERS
324	help
325	  Say Y here if you want to enable the Novatek NT35560 display
326	  controller. This panel supports DSI in both command and video
327	  mode. This supports several panels such as Sony ACX424AKM and
328	  ACX424AKP.
329
330config DRM_PANEL_NOVATEK_NT35950
331	tristate "Novatek NT35950 DSI panel"
332	depends on OF
333	depends on DRM_MIPI_DSI
334	depends on BACKLIGHT_CLASS_DEVICE
335	help
336	  Say Y here if you want to enable support for the panels built
337	  around the Novatek NT35950 display controller, such as some
338	  Sharp panels used in Sony Xperia Z5 Premium and XZ Premium
339	  mobile phones.
340
341config DRM_PANEL_NOVATEK_NT36672A
342	tristate "Novatek NT36672A DSI panel"
343	depends on OF
344	depends on DRM_MIPI_DSI
345	depends on BACKLIGHT_CLASS_DEVICE
346	help
347	  Say Y here if you want to enable support for the panels built
348	  around the Novatek NT36672A display controller, such as some
349	  Tianma panels used in a few Xiaomi Poco F1 mobile phones.
350
351config DRM_PANEL_NOVATEK_NT39016
352	tristate "Novatek NT39016 RGB/SPI panel"
353	depends on OF && SPI
354	depends on BACKLIGHT_CLASS_DEVICE
355	select REGMAP_SPI
356	help
357	  Say Y here if you want to enable support for the panels built
358	  around the Novatek NT39016 display controller.
359
360config DRM_PANEL_MANTIX_MLAF057WE51
361	tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
362	depends on OF
363	depends on DRM_MIPI_DSI
364	depends on BACKLIGHT_CLASS_DEVICE
365	help
366	  Say Y here if you want to enable support for the Mantix
367	  MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
368	  has a resolution of 720x1440 pixels, a built in backlight and touch
369	  controller.
370
371config DRM_PANEL_OLIMEX_LCD_OLINUXINO
372	tristate "Olimex LCD-OLinuXino panel"
373	depends on OF
374	depends on I2C
375	depends on BACKLIGHT_CLASS_DEVICE
376	select CRC32
377	help
378	  The panel is used with different sizes LCDs, from 480x272 to
379	  1280x800, and 24 bit per pixel.
380
381	  Say Y here if you want to enable support for Olimex Ltd.
382	  LCD-OLinuXino panel.
383
384config DRM_PANEL_ORISETECH_OTM8009A
385	tristate "Orise Technology otm8009a 480x800 dsi 2dl panel"
386	depends on OF
387	depends on DRM_MIPI_DSI
388	depends on BACKLIGHT_CLASS_DEVICE
389	help
390	  Say Y here if you want to enable support for Orise Technology
391	  otm8009a 480x800 dsi 2dl panel.
392
393config DRM_PANEL_OSD_OSD101T2587_53TS
394	tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel"
395	depends on OF
396	depends on DRM_MIPI_DSI
397	depends on BACKLIGHT_CLASS_DEVICE
398	help
399	  Say Y here if you want to enable support for One Stop Displays
400	  OSD101T2587-53TS 10.1" 1920x1200 dsi panel.
401
402config DRM_PANEL_PANASONIC_VVX10F034N00
403	tristate "Panasonic VVX10F034N00 1920x1200 video mode panel"
404	depends on OF
405	depends on DRM_MIPI_DSI
406	depends on BACKLIGHT_CLASS_DEVICE
407	help
408	  Say Y here if you want to enable support for Panasonic VVX10F034N00
409	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
410	  Xperia Z2 tablets
411
412config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN
413	tristate "Raspberry Pi 7-inch touchscreen panel"
414	depends on DRM_MIPI_DSI
415	help
416	  Say Y here if you want to enable support for the Raspberry
417	  Pi 7" Touchscreen.  To compile this driver as a module,
418	  choose M here.
419
420config DRM_PANEL_RAYDIUM_RM67191
421	tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel"
422	depends on OF
423	depends on DRM_MIPI_DSI
424	depends on BACKLIGHT_CLASS_DEVICE
425	help
426	  Say Y here if you want to enable support for Raydium RM67191 FHD
427	  (1080x1920) DSI panel.
428
429config DRM_PANEL_RAYDIUM_RM68200
430	tristate "Raydium RM68200 720x1280 DSI video mode panel"
431	depends on OF
432	depends on DRM_MIPI_DSI
433	depends on BACKLIGHT_CLASS_DEVICE
434	help
435	  Say Y here if you want to enable support for Raydium RM68200
436	  720x1280 DSI video mode panel.
437
438config DRM_PANEL_RONBO_RB070D30
439	tristate "Ronbo Electronics RB070D30 panel"
440	depends on OF
441	depends on DRM_MIPI_DSI
442	depends on BACKLIGHT_CLASS_DEVICE
443	help
444	  Say Y here if you want to enable support for Ronbo Electronics
445	  RB070D30 1024x600 DSI panel.
446
447config DRM_PANEL_SAMSUNG_ATNA33XC20
448	tristate "Samsung ATNA33XC20 eDP panel"
449	depends on OF
450	depends on BACKLIGHT_CLASS_DEVICE
451	depends on PM
452	select DRM_DISPLAY_DP_HELPER
453	select DRM_DISPLAY_HELPER
454	select DRM_DP_AUX_BUS
455	help
456	  DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't
457	  be handled by the DRM_PANEL_SIMPLE driver because its power
458	  sequencing is non-standard.
459
460config DRM_PANEL_SAMSUNG_DB7430
461	tristate "Samsung DB7430-based DPI panels"
462	depends on OF && SPI && GPIOLIB
463	depends on BACKLIGHT_CLASS_DEVICE
464	select DRM_MIPI_DBI
465	help
466	  Say Y here if you want to enable support for the Samsung
467	  DB7430 DPI display controller used in such devices as the
468	  LMS397KF04 480x800 DPI panel.
469
470config DRM_PANEL_SAMSUNG_S6D16D0
471	tristate "Samsung S6D16D0 DSI video mode panel"
472	depends on OF
473	depends on DRM_MIPI_DSI
474	select VIDEOMODE_HELPERS
475
476config DRM_PANEL_SAMSUNG_S6D27A1
477	tristate "Samsung S6D27A1 DPI panel driver"
478	depends on OF && SPI && GPIOLIB
479	select DRM_MIPI_DBI
480	help
481	  Say Y here if you want to enable support for the Samsung
482	  S6D27A1 DPI 480x800 panel.
483
484	  This panel can be found in Samsung Galaxy Ace 2
485	  GT-I8160 mobile phone.
486
487config DRM_PANEL_SAMSUNG_S6E3HA2
488	tristate "Samsung S6E3HA2 DSI video mode panel"
489	depends on OF
490	depends on DRM_MIPI_DSI
491	depends on BACKLIGHT_CLASS_DEVICE
492	select VIDEOMODE_HELPERS
493
494config DRM_PANEL_SAMSUNG_S6E63J0X03
495	tristate "Samsung S6E63J0X03 DSI command mode panel"
496	depends on OF
497	depends on DRM_MIPI_DSI
498	depends on BACKLIGHT_CLASS_DEVICE
499	select VIDEOMODE_HELPERS
500
501config DRM_PANEL_SAMSUNG_S6E63M0
502	tristate "Samsung S6E63M0 RGB panel"
503	depends on OF
504	depends on BACKLIGHT_CLASS_DEVICE
505	help
506	  Say Y here if you want to enable support for Samsung S6E63M0
507	  AMOLED LCD panel. This panel can be accessed using SPI or
508	  DSI.
509
510config DRM_PANEL_SAMSUNG_S6E63M0_SPI
511	tristate "Samsung S6E63M0 RGB SPI interface"
512	depends on SPI
513	depends on DRM_PANEL_SAMSUNG_S6E63M0
514	default DRM_PANEL_SAMSUNG_S6E63M0
515	select DRM_MIPI_DBI
516	help
517	  Say Y here if you want to be able to access the Samsung
518	  S6E63M0 panel using SPI.
519
520config DRM_PANEL_SAMSUNG_S6E63M0_DSI
521	tristate "Samsung S6E63M0 RGB DSI interface"
522	depends on DRM_MIPI_DSI
523	depends on DRM_PANEL_SAMSUNG_S6E63M0
524	help
525	  Say Y here if you want to be able to access the Samsung
526	  S6E63M0 panel using DSI.
527
528config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
529	tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
530	depends on OF
531	select DRM_MIPI_DSI
532	select VIDEOMODE_HELPERS
533
534config DRM_PANEL_SAMSUNG_S6E8AA0
535	tristate "Samsung S6E8AA0 DSI video mode panel"
536	depends on OF
537	select DRM_MIPI_DSI
538	select VIDEOMODE_HELPERS
539
540config DRM_PANEL_SAMSUNG_SOFEF00
541	tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels"
542	depends on OF
543	depends on DRM_MIPI_DSI
544	depends on BACKLIGHT_CLASS_DEVICE
545	select VIDEOMODE_HELPERS
546	help
547	  Say Y or M here if you want to enable support for the Samsung AMOLED
548	  command mode panels found in the OnePlus 6/6T smartphones.
549
550	  The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively
551
552config DRM_PANEL_SEIKO_43WVF1G
553	tristate "Seiko 43WVF1G panel"
554	depends on OF
555	depends on BACKLIGHT_CLASS_DEVICE
556	select VIDEOMODE_HELPERS
557	help
558	  Say Y here if you want to enable support for the Seiko
559	  43WVF1G controller for 800x480 LCD panels
560
561config DRM_PANEL_SHARP_LQ101R1SX01
562	tristate "Sharp LQ101R1SX01 panel"
563	depends on OF
564	depends on DRM_MIPI_DSI
565	depends on BACKLIGHT_CLASS_DEVICE
566	help
567	  Say Y here if you want to enable support for Sharp LQ101R1SX01
568	  TFT-LCD modules. The panel has a 2560x1600 resolution and uses
569	  24 bit RGB per pixel. It provides a dual MIPI DSI interface to
570	  the host and has a built-in LED backlight.
571
572	  To compile this driver as a module, choose M here: the module
573	  will be called panel-sharp-lq101r1sx01.
574
575config DRM_PANEL_SHARP_LS037V7DW01
576	tristate "Sharp LS037V7DW01 VGA LCD panel"
577	depends on GPIOLIB && OF && REGULATOR
578	help
579	  Say Y here if you want to enable support for Sharp LS037V7DW01 VGA
580	  (480x640) LCD panel (found on the TI SDP3430 board).
581
582config DRM_PANEL_SHARP_LS043T1LE01
583	tristate "Sharp LS043T1LE01 qHD video mode panel"
584	depends on OF
585	depends on DRM_MIPI_DSI
586	depends on BACKLIGHT_CLASS_DEVICE
587	help
588	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
589	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
590
591config DRM_PANEL_SHARP_LS060T1SX01
592	tristate "Sharp LS060T1SX01 FullHD video mode panel"
593	depends on OF
594	depends on DRM_MIPI_DSI
595	depends on BACKLIGHT_CLASS_DEVICE
596	help
597	  Say Y here if you want to enable support for Sharp LS060T1SX01 6.0"
598	  FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter
599	  Bundle.
600
601config DRM_PANEL_SITRONIX_ST7701
602	tristate "Sitronix ST7701 panel driver"
603	depends on OF
604	depends on DRM_MIPI_DSI
605	depends on BACKLIGHT_CLASS_DEVICE
606	help
607	  Say Y here if you want to enable support for the Sitronix
608	  ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI
609	  system interfaces.
610
611config DRM_PANEL_SITRONIX_ST7703
612	tristate "Sitronix ST7703 based MIPI touchscreen panels"
613	depends on OF
614	depends on DRM_MIPI_DSI
615	depends on BACKLIGHT_CLASS_DEVICE
616	help
617	  Say Y here if you want to enable support for Sitronix ST7703 based
618	  panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in
619	  the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built
620	  in backlight and touch controller.
621	  Touch input support is provided by the goodix driver and needs to be
622	  selected separately.
623
624config DRM_PANEL_SITRONIX_ST7789V
625	tristate "Sitronix ST7789V panel"
626	depends on OF && SPI
627	depends on BACKLIGHT_CLASS_DEVICE
628	help
629	  Say Y here if you want to enable support for the Sitronix
630	  ST7789V controller for 240x320 LCD panels
631
632config DRM_PANEL_SONY_ACX565AKM
633	tristate "Sony ACX565AKM panel"
634	depends on GPIOLIB && OF && SPI
635	depends on BACKLIGHT_CLASS_DEVICE
636	help
637	  Say Y here if you want to enable support for the Sony ACX565AKM
638	  800x600 3.5" panel (found on the Nokia N900).
639
640config DRM_PANEL_SONY_TULIP_TRULY_NT35521
641	tristate "Sony Tulip Truly NT35521 panel"
642	depends on GPIOLIB && OF
643	depends on DRM_MIPI_DSI
644	depends on BACKLIGHT_CLASS_DEVICE
645	help
646	  Say Y here if you want to enable support for the Sony Tulip
647	  NT35521 1280x720 video mode panel as found on Sony Xperia M4
648	  Aqua phone.
649
650config DRM_PANEL_TDO_TL070WSH30
651	tristate "TDO TL070WSH30 DSI panel"
652	depends on OF
653	depends on DRM_MIPI_DSI
654	depends on BACKLIGHT_CLASS_DEVICE
655	help
656	  Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD
657	  panel module. The panel has a 1024×600 resolution and uses
658	  24 bit RGB per pixel. It provides a MIPI DSI interface to
659	  the host, a built-in LED backlight and touch controller.
660
661config DRM_PANEL_TPO_TD028TTEC1
662	tristate "Toppoly (TPO) TD028TTEC1 panel driver"
663	depends on OF && SPI
664	depends on BACKLIGHT_CLASS_DEVICE
665	help
666	  Say Y here if you want to enable support for TPO TD028TTEC1 480x640
667	  2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973).
668
669config DRM_PANEL_TPO_TD043MTEA1
670	tristate "Toppoly (TPO) TD043MTEA1 panel driver"
671	depends on GPIOLIB && OF && REGULATOR && SPI
672	help
673	  Say Y here if you want to enable support for TPO TD043MTEA1 800x480
674	  4.3" panel (found on the OMAP3 Pandora board).
675
676config DRM_PANEL_TPO_TPG110
677	tristate "TPO TPG 800x400 panel"
678	depends on OF && SPI && GPIOLIB
679	depends on BACKLIGHT_CLASS_DEVICE
680	help
681	  Say Y here if you want to enable support for TPO TPG110
682	  400CH LTPS TFT LCD Single Chip Digital Driver for up to
683	  800x400 LCD panels.
684
685config DRM_PANEL_TRULY_NT35597_WQXGA
686	tristate "Truly WQXGA"
687	depends on OF
688	depends on DRM_MIPI_DSI
689	help
690	  Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
691	  Video Mode panel
692
693config DRM_PANEL_VISIONOX_RM69299
694	tristate "Visionox RM69299"
695	depends on OF
696	depends on DRM_MIPI_DSI
697	help
698	  Say Y here if you want to enable support for Visionox
699	  RM69299  DSI Video Mode panel.
700
701config DRM_PANEL_WIDECHIPS_WS2401
702	tristate "Widechips WS2401 DPI panel driver"
703	depends on SPI && GPIOLIB
704	depends on BACKLIGHT_CLASS_DEVICE
705	select DRM_MIPI_DBI
706	help
707	  Say Y here if you want to enable support for the Widechips WS2401 DPI
708	  480x800 display controller used in panels such as Samsung LMS380KF01.
709	  This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina).
710
711config DRM_PANEL_XINPENG_XPP055C272
712	tristate "Xinpeng XPP055C272 panel driver"
713	depends on OF
714	depends on DRM_MIPI_DSI
715	depends on BACKLIGHT_CLASS_DEVICE
716	help
717	  Say Y here if you want to enable support for the Xinpeng
718	  XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI
719	  system interfaces.
720endmenu
721