1# SPDX-License-Identifier: GPL-2.0-only 2config DRM_PANEL 3 bool 4 depends on DRM 5 help 6 Panel registration and lookup framework. 7 8menu "Display Panels" 9 depends on DRM && DRM_PANEL 10 11config DRM_PANEL_ABT_Y030XX067A 12 tristate "ABT Y030XX067A 320x480 LCD panel" 13 depends on OF && SPI 14 select REGMAP_SPI 15 help 16 Say Y here to enable support for the Asia Better Technology Ltd. 17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300 18 and RG-99 handheld gaming consoles. 19 20config DRM_PANEL_ARM_VERSATILE 21 tristate "ARM Versatile panel driver" 22 depends on OF 23 depends on MFD_SYSCON 24 select VIDEOMODE_HELPERS 25 help 26 This driver supports the ARM Versatile panels connected to ARM 27 reference designs. The panel is detected using special registers 28 in the Versatile family syscon registers. 29 30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 31 tristate "ASUS Z00T TM5P5 NT35596 panel" 32 depends on GPIOLIB && OF 33 depends on DRM_MIPI_DSI 34 depends on BACKLIGHT_CLASS_DEVICE 35 help 36 Say Y here if you want to enable support for the ASUS TMP5P5 37 NT35596 1080x1920 video mode panel as found in some Asus 38 Zenfone 2 Laser Z00T devices. 39 40config DRM_PANEL_BOE_BF060Y8M_AJ0 41 tristate "Boe BF060Y8M-AJ0 panel" 42 depends on OF 43 depends on DRM_MIPI_DSI 44 depends on BACKLIGHT_CLASS_DEVICE 45 help 46 Say Y here if you want to enable support for Boe BF060Y8M-AJ0 47 5.99" AMOLED modules. The panel has a 1080x2160 resolution and 48 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to 49 the host and backlight is controlled through DSI commands. 50 51config DRM_PANEL_BOE_HIMAX8279D 52 tristate "Boe Himax8279d panel" 53 depends on OF 54 depends on DRM_MIPI_DSI 55 depends on BACKLIGHT_CLASS_DEVICE 56 help 57 Say Y here if you want to enable support for Boe Himax8279d 58 TFT-LCD modules. The panel has a 1200x1920 resolution and uses 59 24 bit RGB per pixel. It provides a MIPI DSI interface to 60 the host and has a built-in LED backlight. 61 62config DRM_PANEL_BOE_TV101WUM_NL6 63 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" 64 depends on OF 65 depends on DRM_MIPI_DSI 66 depends on BACKLIGHT_CLASS_DEVICE 67 help 68 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 69 45NA WUXGA PANEL DSI Video Mode panel 70 71config DRM_PANEL_DSI_CM 72 tristate "Generic DSI command mode panels" 73 depends on OF 74 depends on DRM_MIPI_DSI 75 depends on BACKLIGHT_CLASS_DEVICE 76 help 77 DRM panel driver for DSI command mode panels with support for 78 embedded and external backlights. 79 80config DRM_PANEL_LVDS 81 tristate "Generic LVDS panel driver" 82 depends on OF 83 depends on BACKLIGHT_CLASS_DEVICE 84 select VIDEOMODE_HELPERS 85 help 86 This driver supports LVDS panels that don't require device-specific 87 handling of power supplies or control signals. It implements automatic 88 backlight handling if the panel is attached to a backlight controller. 89 90config DRM_PANEL_SIMPLE 91 tristate "support for simple panels (other than eDP ones)" 92 depends on OF 93 depends on BACKLIGHT_CLASS_DEVICE 94 depends on PM 95 select VIDEOMODE_HELPERS 96 help 97 DRM panel driver for dumb non-eDP panels that need at most a regulator 98 and a GPIO to be powered up. Optionally a backlight can be attached so 99 that it can be automatically turned off when the panel goes into a 100 low power state. 101 102config DRM_PANEL_EDP 103 tristate "support for simple Embedded DisplayPort panels" 104 depends on OF 105 depends on BACKLIGHT_CLASS_DEVICE 106 depends on PM 107 select VIDEOMODE_HELPERS 108 select DRM_DP_AUX_BUS 109 select DRM_DP_HELPER 110 select DRM_KMS_HELPER 111 help 112 DRM panel driver for dumb eDP panels that need at most a regulator and 113 a GPIO to be powered up. Optionally a backlight can be attached so 114 that it can be automatically turned off when the panel goes into a 115 low power state. 116 117config DRM_PANEL_ELIDA_KD35T133 118 tristate "Elida KD35T133 panel driver" 119 depends on OF 120 depends on DRM_MIPI_DSI 121 depends on BACKLIGHT_CLASS_DEVICE 122 help 123 Say Y here if you want to enable support for the Elida 124 KD35T133 controller for 320x480 LCD panels with MIPI-DSI 125 system interfaces. 126 127config DRM_PANEL_FEIXIN_K101_IM2BA02 128 tristate "Feixin K101 IM2BA02 panel" 129 depends on OF 130 depends on DRM_MIPI_DSI 131 depends on BACKLIGHT_CLASS_DEVICE 132 help 133 Say Y here if you want to enable support for the Feixin K101 IM2BA02 134 4-lane 800x1280 MIPI DSI panel. 135 136config DRM_PANEL_FEIYANG_FY07024DI26A30D 137 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" 138 depends on OF 139 depends on DRM_MIPI_DSI 140 depends on BACKLIGHT_CLASS_DEVICE 141 help 142 Say Y if you want to enable support for panels based on the 143 Feiyang FY07024DI26A30-D MIPI-DSI interface. 144 145config DRM_PANEL_ILITEK_IL9322 146 tristate "Ilitek ILI9322 320x240 QVGA panels" 147 depends on OF && SPI 148 select REGMAP 149 help 150 Say Y here if you want to enable support for Ilitek IL9322 151 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. 152 153config DRM_PANEL_ILITEK_ILI9341 154 tristate "Ilitek ILI9341 240x320 QVGA panels" 155 depends on OF && SPI 156 depends on DRM_KMS_HELPER 157 depends on DRM_GEM_CMA_HELPER 158 depends on BACKLIGHT_CLASS_DEVICE 159 select DRM_MIPI_DBI 160 help 161 Say Y here if you want to enable support for Ilitek IL9341 162 QVGA (240x320) RGB panels. support serial & parallel rgb 163 interface. 164 165config DRM_PANEL_ILITEK_ILI9881C 166 tristate "Ilitek ILI9881C-based panels" 167 depends on OF 168 depends on DRM_MIPI_DSI 169 depends on BACKLIGHT_CLASS_DEVICE 170 help 171 Say Y if you want to enable support for panels based on the 172 Ilitek ILI9881c controller. 173 174config DRM_PANEL_INNOLUX_EJ030NA 175 tristate "Innolux EJ030NA 320x480 LCD panel" 176 depends on OF && SPI 177 select REGMAP_SPI 178 help 179 Say Y here to enable support for the Innolux/Chimei EJ030NA 180 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips) 181 and LDK handheld gaming consoles. 182 183config DRM_PANEL_INNOLUX_P079ZCA 184 tristate "Innolux P079ZCA panel" 185 depends on OF 186 depends on DRM_MIPI_DSI 187 depends on BACKLIGHT_CLASS_DEVICE 188 help 189 Say Y here if you want to enable support for Innolux P079ZCA 190 TFT-LCD modules. The panel has a 1024x768 resolution and uses 191 24 bit RGB per pixel. It provides a MIPI DSI interface to 192 the host and has a built-in LED backlight. 193 194config DRM_PANEL_JDI_LT070ME05000 195 tristate "JDI LT070ME05000 WUXGA DSI panel" 196 depends on OF 197 depends on DRM_MIPI_DSI 198 depends on BACKLIGHT_CLASS_DEVICE 199 help 200 Say Y here if you want to enable support for JDI DSI video mode 201 panel as found in Google Nexus 7 (2013) devices. 202 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 203 24 bit per pixel. 204 205config DRM_PANEL_JDI_R63452 206 tristate "JDI R63452 Full HD DSI panel" 207 depends on OF 208 depends on DRM_MIPI_DSI 209 depends on BACKLIGHT_CLASS_DEVICE 210 help 211 Say Y here if you want to enable support for the JDI R63452 212 DSI command mode panel as found in Xiaomi Mi 5 Devices. 213 214config DRM_PANEL_KHADAS_TS050 215 tristate "Khadas TS050 panel" 216 depends on OF 217 depends on DRM_MIPI_DSI 218 depends on BACKLIGHT_CLASS_DEVICE 219 help 220 Say Y here if you want to enable support for Khadas TS050 TFT-LCD 221 panel module. The panel has a 1080x1920 resolution and uses 222 24 bit RGB per pixel. It provides a MIPI DSI interface to 223 the host, a built-in LED backlight and touch controller. 224 225config DRM_PANEL_KINGDISPLAY_KD097D04 226 tristate "Kingdisplay kd097d04 panel" 227 depends on OF 228 depends on DRM_MIPI_DSI 229 depends on BACKLIGHT_CLASS_DEVICE 230 help 231 Say Y here if you want to enable support for Kingdisplay kd097d04 232 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 233 24 bit RGB per pixel. It provides a MIPI DSI interface to 234 the host and has a built-in LED backlight. 235 236config DRM_PANEL_LEADTEK_LTK050H3146W 237 tristate "Leadtek LTK050H3146W panel" 238 depends on OF 239 depends on DRM_MIPI_DSI 240 depends on BACKLIGHT_CLASS_DEVICE 241 help 242 Say Y here if you want to enable support for Leadtek LTK050H3146W 243 TFT-LCD modules. The panel has a 720x1280 resolution and uses 244 24 bit RGB per pixel. It provides a MIPI DSI interface to 245 the host and has a built-in LED backlight. 246 247config DRM_PANEL_LEADTEK_LTK500HD1829 248 tristate "Leadtek LTK500HD1829 panel" 249 depends on OF 250 depends on DRM_MIPI_DSI 251 depends on BACKLIGHT_CLASS_DEVICE 252 help 253 Say Y here if you want to enable support for Kingdisplay kd097d04 254 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 255 24 bit RGB per pixel. It provides a MIPI DSI interface to 256 the host and has a built-in LED backlight. 257 258config DRM_PANEL_SAMSUNG_LD9040 259 tristate "Samsung LD9040 RGB/SPI panel" 260 depends on OF && SPI 261 select VIDEOMODE_HELPERS 262 263config DRM_PANEL_LG_LB035Q02 264 tristate "LG LB035Q024573 RGB panel" 265 depends on GPIOLIB && OF && SPI 266 help 267 Say Y here if you want to enable support for the LB035Q02 RGB panel 268 (found on the Gumstix Overo Palo35 board). To compile this driver as 269 a module, choose M here. 270 271config DRM_PANEL_LG_LG4573 272 tristate "LG4573 RGB/SPI panel" 273 depends on OF && SPI 274 select VIDEOMODE_HELPERS 275 help 276 Say Y here if you want to enable support for LG4573 RGB panel. 277 To compile this driver as a module, choose M here. 278 279config DRM_PANEL_NEC_NL8048HL11 280 tristate "NEC NL8048HL11 RGB panel" 281 depends on GPIOLIB && OF && SPI 282 help 283 Say Y here if you want to enable support for the NEC NL8048HL11 RGB 284 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver 285 as a module, choose M here. 286 287config DRM_PANEL_NOVATEK_NT35510 288 tristate "Novatek NT35510 RGB panel driver" 289 depends on OF 290 depends on DRM_MIPI_DSI 291 depends on BACKLIGHT_CLASS_DEVICE 292 help 293 Say Y here if you want to enable support for the panels built 294 around the Novatek NT35510 display controller, such as some 295 Hydis panels. 296 297config DRM_PANEL_NOVATEK_NT35560 298 tristate "Novatek NT35560 DSI command mode panel" 299 depends on OF 300 depends on DRM_MIPI_DSI 301 depends on BACKLIGHT_CLASS_DEVICE 302 select VIDEOMODE_HELPERS 303 help 304 Say Y here if you want to enable the Novatek NT35560 display 305 controller. This panel supports DSI in both command and video 306 mode. This supports several panels such as Sony ACX424AKM and 307 ACX424AKP. 308 309config DRM_PANEL_NOVATEK_NT35950 310 tristate "Novatek NT35950 DSI panel" 311 depends on OF 312 depends on DRM_MIPI_DSI 313 depends on BACKLIGHT_CLASS_DEVICE 314 help 315 Say Y here if you want to enable support for the panels built 316 around the Novatek NT35950 display controller, such as some 317 Sharp panels used in Sony Xperia Z5 Premium and XZ Premium 318 mobile phones. 319 320config DRM_PANEL_NOVATEK_NT36672A 321 tristate "Novatek NT36672A DSI panel" 322 depends on OF 323 depends on DRM_MIPI_DSI 324 depends on BACKLIGHT_CLASS_DEVICE 325 help 326 Say Y here if you want to enable support for the panels built 327 around the Novatek NT36672A display controller, such as some 328 Tianma panels used in a few Xiaomi Poco F1 mobile phones. 329 330config DRM_PANEL_NOVATEK_NT39016 331 tristate "Novatek NT39016 RGB/SPI panel" 332 depends on OF && SPI 333 depends on BACKLIGHT_CLASS_DEVICE 334 select REGMAP_SPI 335 help 336 Say Y here if you want to enable support for the panels built 337 around the Novatek NT39016 display controller. 338 339config DRM_PANEL_MANTIX_MLAF057WE51 340 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" 341 depends on OF 342 depends on DRM_MIPI_DSI 343 depends on BACKLIGHT_CLASS_DEVICE 344 help 345 Say Y here if you want to enable support for the Mantix 346 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It 347 has a resolution of 720x1440 pixels, a built in backlight and touch 348 controller. 349 350config DRM_PANEL_OLIMEX_LCD_OLINUXINO 351 tristate "Olimex LCD-OLinuXino panel" 352 depends on OF 353 depends on I2C 354 depends on BACKLIGHT_CLASS_DEVICE 355 select CRC32 356 help 357 The panel is used with different sizes LCDs, from 480x272 to 358 1280x800, and 24 bit per pixel. 359 360 Say Y here if you want to enable support for Olimex Ltd. 361 LCD-OLinuXino panel. 362 363config DRM_PANEL_ORISETECH_OTM8009A 364 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" 365 depends on OF 366 depends on DRM_MIPI_DSI 367 depends on BACKLIGHT_CLASS_DEVICE 368 help 369 Say Y here if you want to enable support for Orise Technology 370 otm8009a 480x800 dsi 2dl panel. 371 372config DRM_PANEL_OSD_OSD101T2587_53TS 373 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" 374 depends on OF 375 depends on DRM_MIPI_DSI 376 depends on BACKLIGHT_CLASS_DEVICE 377 help 378 Say Y here if you want to enable support for One Stop Displays 379 OSD101T2587-53TS 10.1" 1920x1200 dsi panel. 380 381config DRM_PANEL_PANASONIC_VVX10F034N00 382 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" 383 depends on OF 384 depends on DRM_MIPI_DSI 385 depends on BACKLIGHT_CLASS_DEVICE 386 help 387 Say Y here if you want to enable support for Panasonic VVX10F034N00 388 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some 389 Xperia Z2 tablets 390 391config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN 392 tristate "Raspberry Pi 7-inch touchscreen panel" 393 depends on DRM_MIPI_DSI 394 help 395 Say Y here if you want to enable support for the Raspberry 396 Pi 7" Touchscreen. To compile this driver as a module, 397 choose M here. 398 399config DRM_PANEL_RAYDIUM_RM67191 400 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" 401 depends on OF 402 depends on DRM_MIPI_DSI 403 depends on BACKLIGHT_CLASS_DEVICE 404 help 405 Say Y here if you want to enable support for Raydium RM67191 FHD 406 (1080x1920) DSI panel. 407 408config DRM_PANEL_RAYDIUM_RM68200 409 tristate "Raydium RM68200 720x1280 DSI video mode panel" 410 depends on OF 411 depends on DRM_MIPI_DSI 412 depends on BACKLIGHT_CLASS_DEVICE 413 help 414 Say Y here if you want to enable support for Raydium RM68200 415 720x1280 DSI video mode panel. 416 417config DRM_PANEL_RONBO_RB070D30 418 tristate "Ronbo Electronics RB070D30 panel" 419 depends on OF 420 depends on DRM_MIPI_DSI 421 depends on BACKLIGHT_CLASS_DEVICE 422 help 423 Say Y here if you want to enable support for Ronbo Electronics 424 RB070D30 1024x600 DSI panel. 425 426config DRM_PANEL_SAMSUNG_ATNA33XC20 427 tristate "Samsung ATNA33XC20 eDP panel" 428 depends on OF 429 depends on BACKLIGHT_CLASS_DEVICE 430 depends on PM 431 select DRM_DP_AUX_BUS 432 help 433 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't 434 be handled by the DRM_PANEL_SIMPLE driver because its power 435 sequencing is non-standard. 436 437config DRM_PANEL_SAMSUNG_DB7430 438 tristate "Samsung DB7430-based DPI panels" 439 depends on OF && SPI && GPIOLIB 440 depends on BACKLIGHT_CLASS_DEVICE 441 select DRM_MIPI_DBI 442 help 443 Say Y here if you want to enable support for the Samsung 444 DB7430 DPI display controller used in such devices as the 445 LMS397KF04 480x800 DPI panel. 446 447config DRM_PANEL_SAMSUNG_S6D16D0 448 tristate "Samsung S6D16D0 DSI video mode panel" 449 depends on OF 450 depends on DRM_MIPI_DSI 451 select VIDEOMODE_HELPERS 452 453config DRM_PANEL_SAMSUNG_S6D27A1 454 tristate "Samsung S6D27A1 DPI panel driver" 455 depends on OF && SPI && GPIOLIB 456 select DRM_MIPI_DBI 457 help 458 Say Y here if you want to enable support for the Samsung 459 S6D27A1 DPI 480x800 panel. 460 461 This panel can be found in Samsung Galaxy Ace 2 462 GT-I8160 mobile phone. 463 464config DRM_PANEL_SAMSUNG_S6E3HA2 465 tristate "Samsung S6E3HA2 DSI video mode panel" 466 depends on OF 467 depends on DRM_MIPI_DSI 468 depends on BACKLIGHT_CLASS_DEVICE 469 select VIDEOMODE_HELPERS 470 471config DRM_PANEL_SAMSUNG_S6E63J0X03 472 tristate "Samsung S6E63J0X03 DSI command mode panel" 473 depends on OF 474 depends on DRM_MIPI_DSI 475 depends on BACKLIGHT_CLASS_DEVICE 476 select VIDEOMODE_HELPERS 477 478config DRM_PANEL_SAMSUNG_S6E63M0 479 tristate "Samsung S6E63M0 RGB panel" 480 depends on OF 481 depends on BACKLIGHT_CLASS_DEVICE 482 help 483 Say Y here if you want to enable support for Samsung S6E63M0 484 AMOLED LCD panel. This panel can be accessed using SPI or 485 DSI. 486 487config DRM_PANEL_SAMSUNG_S6E63M0_SPI 488 tristate "Samsung S6E63M0 RGB SPI interface" 489 depends on SPI 490 depends on DRM_PANEL_SAMSUNG_S6E63M0 491 default DRM_PANEL_SAMSUNG_S6E63M0 492 select DRM_MIPI_DBI 493 help 494 Say Y here if you want to be able to access the Samsung 495 S6E63M0 panel using SPI. 496 497config DRM_PANEL_SAMSUNG_S6E63M0_DSI 498 tristate "Samsung S6E63M0 RGB DSI interface" 499 depends on DRM_MIPI_DSI 500 depends on DRM_PANEL_SAMSUNG_S6E63M0 501 help 502 Say Y here if you want to be able to access the Samsung 503 S6E63M0 panel using DSI. 504 505config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 506 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" 507 depends on OF 508 select DRM_MIPI_DSI 509 select VIDEOMODE_HELPERS 510 511config DRM_PANEL_SAMSUNG_S6E8AA0 512 tristate "Samsung S6E8AA0 DSI video mode panel" 513 depends on OF 514 select DRM_MIPI_DSI 515 select VIDEOMODE_HELPERS 516 517config DRM_PANEL_SAMSUNG_SOFEF00 518 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels" 519 depends on OF 520 depends on DRM_MIPI_DSI 521 depends on BACKLIGHT_CLASS_DEVICE 522 select VIDEOMODE_HELPERS 523 help 524 Say Y or M here if you want to enable support for the Samsung AMOLED 525 command mode panels found in the OnePlus 6/6T smartphones. 526 527 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively 528 529config DRM_PANEL_SEIKO_43WVF1G 530 tristate "Seiko 43WVF1G panel" 531 depends on OF 532 depends on BACKLIGHT_CLASS_DEVICE 533 select VIDEOMODE_HELPERS 534 help 535 Say Y here if you want to enable support for the Seiko 536 43WVF1G controller for 800x480 LCD panels 537 538config DRM_PANEL_SHARP_LQ101R1SX01 539 tristate "Sharp LQ101R1SX01 panel" 540 depends on OF 541 depends on DRM_MIPI_DSI 542 depends on BACKLIGHT_CLASS_DEVICE 543 help 544 Say Y here if you want to enable support for Sharp LQ101R1SX01 545 TFT-LCD modules. The panel has a 2560x1600 resolution and uses 546 24 bit RGB per pixel. It provides a dual MIPI DSI interface to 547 the host and has a built-in LED backlight. 548 549 To compile this driver as a module, choose M here: the module 550 will be called panel-sharp-lq101r1sx01. 551 552config DRM_PANEL_SHARP_LS037V7DW01 553 tristate "Sharp LS037V7DW01 VGA LCD panel" 554 depends on GPIOLIB && OF && REGULATOR 555 help 556 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA 557 (480x640) LCD panel (found on the TI SDP3430 board). 558 559config DRM_PANEL_SHARP_LS043T1LE01 560 tristate "Sharp LS043T1LE01 qHD video mode panel" 561 depends on OF 562 depends on DRM_MIPI_DSI 563 depends on BACKLIGHT_CLASS_DEVICE 564 help 565 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD 566 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard 567 568config DRM_PANEL_SHARP_LS060T1SX01 569 tristate "Sharp LS060T1SX01 FullHD video mode panel" 570 depends on OF 571 depends on DRM_MIPI_DSI 572 depends on BACKLIGHT_CLASS_DEVICE 573 help 574 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0" 575 FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter 576 Bundle. 577 578config DRM_PANEL_SITRONIX_ST7701 579 tristate "Sitronix ST7701 panel driver" 580 depends on OF 581 depends on DRM_MIPI_DSI 582 depends on BACKLIGHT_CLASS_DEVICE 583 help 584 Say Y here if you want to enable support for the Sitronix 585 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI 586 system interfaces. 587 588config DRM_PANEL_SITRONIX_ST7703 589 tristate "Sitronix ST7703 based MIPI touchscreen panels" 590 depends on OF 591 depends on DRM_MIPI_DSI 592 depends on BACKLIGHT_CLASS_DEVICE 593 help 594 Say Y here if you want to enable support for Sitronix ST7703 based 595 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in 596 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built 597 in backlight and touch controller. 598 Touch input support is provided by the goodix driver and needs to be 599 selected separately. 600 601config DRM_PANEL_SITRONIX_ST7789V 602 tristate "Sitronix ST7789V panel" 603 depends on OF && SPI 604 depends on BACKLIGHT_CLASS_DEVICE 605 help 606 Say Y here if you want to enable support for the Sitronix 607 ST7789V controller for 240x320 LCD panels 608 609config DRM_PANEL_SONY_ACX565AKM 610 tristate "Sony ACX565AKM panel" 611 depends on GPIOLIB && OF && SPI 612 depends on BACKLIGHT_CLASS_DEVICE 613 help 614 Say Y here if you want to enable support for the Sony ACX565AKM 615 800x600 3.5" panel (found on the Nokia N900). 616 617config DRM_PANEL_SONY_TULIP_TRULY_NT35521 618 tristate "Sony Tulip Truly NT35521 panel" 619 depends on GPIOLIB && OF 620 depends on DRM_MIPI_DSI 621 depends on BACKLIGHT_CLASS_DEVICE 622 help 623 Say Y here if you want to enable support for the Sony Tulip 624 NT35521 1280x720 video mode panel as found on Sony Xperia M4 625 Aqua phone. 626 627config DRM_PANEL_TDO_TL070WSH30 628 tristate "TDO TL070WSH30 DSI panel" 629 depends on OF 630 depends on DRM_MIPI_DSI 631 depends on BACKLIGHT_CLASS_DEVICE 632 help 633 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD 634 panel module. The panel has a 1024×600 resolution and uses 635 24 bit RGB per pixel. It provides a MIPI DSI interface to 636 the host, a built-in LED backlight and touch controller. 637 638config DRM_PANEL_TPO_TD028TTEC1 639 tristate "Toppoly (TPO) TD028TTEC1 panel driver" 640 depends on OF && SPI 641 depends on BACKLIGHT_CLASS_DEVICE 642 help 643 Say Y here if you want to enable support for TPO TD028TTEC1 480x640 644 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973). 645 646config DRM_PANEL_TPO_TD043MTEA1 647 tristate "Toppoly (TPO) TD043MTEA1 panel driver" 648 depends on GPIOLIB && OF && REGULATOR && SPI 649 help 650 Say Y here if you want to enable support for TPO TD043MTEA1 800x480 651 4.3" panel (found on the OMAP3 Pandora board). 652 653config DRM_PANEL_TPO_TPG110 654 tristate "TPO TPG 800x400 panel" 655 depends on OF && SPI && GPIOLIB 656 depends on BACKLIGHT_CLASS_DEVICE 657 help 658 Say Y here if you want to enable support for TPO TPG110 659 400CH LTPS TFT LCD Single Chip Digital Driver for up to 660 800x400 LCD panels. 661 662config DRM_PANEL_TRULY_NT35597_WQXGA 663 tristate "Truly WQXGA" 664 depends on OF 665 depends on DRM_MIPI_DSI 666 help 667 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI 668 Video Mode panel 669 670config DRM_PANEL_VISIONOX_RM69299 671 tristate "Visionox RM69299" 672 depends on OF 673 depends on DRM_MIPI_DSI 674 help 675 Say Y here if you want to enable support for Visionox 676 RM69299 DSI Video Mode panel. 677 678config DRM_PANEL_WIDECHIPS_WS2401 679 tristate "Widechips WS2401 DPI panel driver" 680 depends on SPI && GPIOLIB 681 depends on BACKLIGHT_CLASS_DEVICE 682 select DRM_MIPI_DBI 683 help 684 Say Y here if you want to enable support for the Widechips WS2401 DPI 685 480x800 display controller used in panels such as Samsung LMS380KF01. 686 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina). 687 688config DRM_PANEL_XINPENG_XPP055C272 689 tristate "Xinpeng XPP055C272 panel driver" 690 depends on OF 691 depends on DRM_MIPI_DSI 692 depends on BACKLIGHT_CLASS_DEVICE 693 help 694 Say Y here if you want to enable support for the Xinpeng 695 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI 696 system interfaces. 697endmenu 698