1# SPDX-License-Identifier: GPL-2.0-only 2config DRM_PANEL 3 bool 4 depends on DRM 5 help 6 Panel registration and lookup framework. 7 8menu "Display Panels" 9 depends on DRM && DRM_PANEL 10 11config DRM_PANEL_ABT_Y030XX067A 12 tristate "ABT Y030XX067A 320x480 LCD panel" 13 depends on OF && SPI 14 select REGMAP_SPI 15 help 16 Say Y here to enable support for the Asia Better Technology Ltd. 17 Y030XX067A 320x480 3.0" panel as found in the YLM RG-280M, RG-300 18 and RG-99 handheld gaming consoles. 19 20config DRM_PANEL_ARM_VERSATILE 21 tristate "ARM Versatile panel driver" 22 depends on OF 23 depends on MFD_SYSCON 24 select VIDEOMODE_HELPERS 25 help 26 This driver supports the ARM Versatile panels connected to ARM 27 reference designs. The panel is detected using special registers 28 in the Versatile family syscon registers. 29 30config DRM_PANEL_ASUS_Z00T_TM5P5_NT35596 31 tristate "ASUS Z00T TM5P5 NT35596 panel" 32 depends on GPIOLIB && OF 33 depends on DRM_MIPI_DSI 34 depends on BACKLIGHT_CLASS_DEVICE 35 help 36 Say Y here if you want to enable support for the ASUS TMP5P5 37 NT35596 1080x1920 video mode panel as found in some Asus 38 Zenfone 2 Laser Z00T devices. 39 40config DRM_PANEL_AUO_A030JTN01 41 tristate "AUO A030JTN01" 42 depends on SPI 43 select REGMAP_SPI 44 help 45 Say Y here to enable support for the AUO A030JTN01 320x480 3.0" panel 46 as found in the YLM RS-97 handheld gaming console. 47 48config DRM_PANEL_BOE_BF060Y8M_AJ0 49 tristate "Boe BF060Y8M-AJ0 panel" 50 depends on OF 51 depends on DRM_MIPI_DSI 52 depends on BACKLIGHT_CLASS_DEVICE 53 help 54 Say Y here if you want to enable support for Boe BF060Y8M-AJ0 55 5.99" AMOLED modules. The panel has a 1080x2160 resolution and 56 uses 24 bit RGB per pixel. It provides a MIPI DSI interface to 57 the host and backlight is controlled through DSI commands. 58 59config DRM_PANEL_BOE_HIMAX8279D 60 tristate "Boe Himax8279d panel" 61 depends on OF 62 depends on DRM_MIPI_DSI 63 depends on BACKLIGHT_CLASS_DEVICE 64 help 65 Say Y here if you want to enable support for Boe Himax8279d 66 TFT-LCD modules. The panel has a 1200x1920 resolution and uses 67 24 bit RGB per pixel. It provides a MIPI DSI interface to 68 the host and has a built-in LED backlight. 69 70config DRM_PANEL_BOE_TV101WUM_NL6 71 tristate "BOE TV101WUM and AUO KD101N80 45NA 1200x1920 panel" 72 depends on OF 73 depends on DRM_MIPI_DSI 74 depends on BACKLIGHT_CLASS_DEVICE 75 help 76 Say Y here if you want to support for BOE TV101WUM and AUO KD101N80 77 45NA WUXGA PANEL DSI Video Mode panel 78 79config DRM_PANEL_DSI_CM 80 tristate "Generic DSI command mode panels" 81 depends on OF 82 depends on DRM_MIPI_DSI 83 depends on BACKLIGHT_CLASS_DEVICE 84 help 85 DRM panel driver for DSI command mode panels with support for 86 embedded and external backlights. 87 88config DRM_PANEL_LVDS 89 tristate "Generic LVDS panel driver" 90 depends on OF 91 depends on BACKLIGHT_CLASS_DEVICE 92 select VIDEOMODE_HELPERS 93 help 94 This driver supports LVDS panels that don't require device-specific 95 handling of power supplies or control signals. It implements automatic 96 backlight handling if the panel is attached to a backlight controller. 97 98config DRM_PANEL_SIMPLE 99 tristate "support for simple panels (other than eDP ones)" 100 depends on OF 101 depends on BACKLIGHT_CLASS_DEVICE 102 depends on PM 103 select VIDEOMODE_HELPERS 104 help 105 DRM panel driver for dumb non-eDP panels that need at most a regulator 106 and a GPIO to be powered up. Optionally a backlight can be attached so 107 that it can be automatically turned off when the panel goes into a 108 low power state. 109 110config DRM_PANEL_EDP 111 tristate "support for simple Embedded DisplayPort panels" 112 depends on OF 113 depends on BACKLIGHT_CLASS_DEVICE 114 depends on PM 115 select VIDEOMODE_HELPERS 116 select DRM_DISPLAY_DP_HELPER 117 select DRM_DISPLAY_HELPER 118 select DRM_DP_AUX_BUS 119 select DRM_KMS_HELPER 120 help 121 DRM panel driver for dumb eDP panels that need at most a regulator and 122 a GPIO to be powered up. Optionally a backlight can be attached so 123 that it can be automatically turned off when the panel goes into a 124 low power state. 125 126config DRM_PANEL_EBBG_FT8719 127 tristate "EBBG FT8719 panel driver" 128 depends on OF 129 depends on DRM_MIPI_DSI 130 depends on BACKLIGHT_CLASS_DEVICE 131 help 132 Say Y here if you want to enable support for the EBBG FT8719 133 video mode panel. Mainly found on Xiaomi Poco F1 mobile phone. 134 The panel has a resolution of 1080x2246. It provides a MIPI DSI 135 interface to the host. 136 137config DRM_PANEL_ELIDA_KD35T133 138 tristate "Elida KD35T133 panel driver" 139 depends on OF 140 depends on DRM_MIPI_DSI 141 depends on BACKLIGHT_CLASS_DEVICE 142 help 143 Say Y here if you want to enable support for the Elida 144 KD35T133 controller for 320x480 LCD panels with MIPI-DSI 145 system interfaces. 146 147config DRM_PANEL_FEIXIN_K101_IM2BA02 148 tristate "Feixin K101 IM2BA02 panel" 149 depends on OF 150 depends on DRM_MIPI_DSI 151 depends on BACKLIGHT_CLASS_DEVICE 152 help 153 Say Y here if you want to enable support for the Feixin K101 IM2BA02 154 4-lane 800x1280 MIPI DSI panel. 155 156config DRM_PANEL_FEIYANG_FY07024DI26A30D 157 tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel" 158 depends on OF 159 depends on DRM_MIPI_DSI 160 depends on BACKLIGHT_CLASS_DEVICE 161 help 162 Say Y if you want to enable support for panels based on the 163 Feiyang FY07024DI26A30-D MIPI-DSI interface. 164 165config DRM_PANEL_HIMAX_HX8394 166 tristate "HIMAX HX8394 MIPI-DSI LCD panels" 167 depends on OF 168 depends on DRM_MIPI_DSI 169 depends on BACKLIGHT_CLASS_DEVICE 170 help 171 Say Y if you want to enable support for panels based on the 172 Himax HX8394 controller, such as the HannStar HSD060BHW4 173 720x1440 TFT LCD panel that uses a MIPI-DSI interface. 174 175 If M is selected the module will be called panel-himax-hx8394. 176 177config DRM_PANEL_ILITEK_IL9322 178 tristate "Ilitek ILI9322 320x240 QVGA panels" 179 depends on OF && SPI 180 select REGMAP 181 help 182 Say Y here if you want to enable support for Ilitek IL9322 183 QVGA (320x240) RGB, YUV and ITU-T BT.656 panels. 184 185config DRM_PANEL_ILITEK_ILI9341 186 tristate "Ilitek ILI9341 240x320 QVGA panels" 187 depends on OF && SPI 188 select DRM_KMS_HELPER 189 select DRM_GEM_DMA_HELPER 190 depends on BACKLIGHT_CLASS_DEVICE 191 select DRM_MIPI_DBI 192 help 193 Say Y here if you want to enable support for Ilitek IL9341 194 QVGA (240x320) RGB panels. support serial & parallel rgb 195 interface. 196 197config DRM_PANEL_ILITEK_ILI9881C 198 tristate "Ilitek ILI9881C-based panels" 199 depends on OF 200 depends on DRM_MIPI_DSI 201 depends on BACKLIGHT_CLASS_DEVICE 202 help 203 Say Y if you want to enable support for panels based on the 204 Ilitek ILI9881c controller. 205 206config DRM_PANEL_INNOLUX_EJ030NA 207 tristate "Innolux EJ030NA 320x480 LCD panel" 208 depends on OF && SPI 209 select REGMAP_SPI 210 help 211 Say Y here to enable support for the Innolux/Chimei EJ030NA 212 320x480 3.0" panel as found in the RS97 V2.1, RG300(non-ips) 213 and LDK handheld gaming consoles. 214 215config DRM_PANEL_INNOLUX_P079ZCA 216 tristate "Innolux P079ZCA panel" 217 depends on OF 218 depends on DRM_MIPI_DSI 219 depends on BACKLIGHT_CLASS_DEVICE 220 help 221 Say Y here if you want to enable support for Innolux P079ZCA 222 TFT-LCD modules. The panel has a 1024x768 resolution and uses 223 24 bit RGB per pixel. It provides a MIPI DSI interface to 224 the host and has a built-in LED backlight. 225 226config DRM_PANEL_JADARD_JD9365DA_H3 227 tristate "Jadard JD9365DA-H3 WXGA DSI panel" 228 depends on OF 229 depends on DRM_MIPI_DSI 230 depends on BACKLIGHT_CLASS_DEVICE 231 help 232 Say Y here if you want to enable support for Jadard JD9365DA-H3 233 WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with 234 800RGBx1280 dots at maximum. 235 236config DRM_PANEL_JDI_LT070ME05000 237 tristate "JDI LT070ME05000 WUXGA DSI panel" 238 depends on OF 239 depends on DRM_MIPI_DSI 240 depends on BACKLIGHT_CLASS_DEVICE 241 help 242 Say Y here if you want to enable support for JDI DSI video mode 243 panel as found in Google Nexus 7 (2013) devices. 244 The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses 245 24 bit per pixel. 246 247config DRM_PANEL_JDI_R63452 248 tristate "JDI R63452 Full HD DSI panel" 249 depends on OF 250 depends on DRM_MIPI_DSI 251 depends on BACKLIGHT_CLASS_DEVICE 252 help 253 Say Y here if you want to enable support for the JDI R63452 254 DSI command mode panel as found in Xiaomi Mi 5 Devices. 255 256config DRM_PANEL_KHADAS_TS050 257 tristate "Khadas TS050 panel" 258 depends on OF 259 depends on DRM_MIPI_DSI 260 depends on BACKLIGHT_CLASS_DEVICE 261 help 262 Say Y here if you want to enable support for Khadas TS050 TFT-LCD 263 panel module. The panel has a 1080x1920 resolution and uses 264 24 bit RGB per pixel. It provides a MIPI DSI interface to 265 the host, a built-in LED backlight and touch controller. 266 267config DRM_PANEL_KINGDISPLAY_KD097D04 268 tristate "Kingdisplay kd097d04 panel" 269 depends on OF 270 depends on DRM_MIPI_DSI 271 depends on BACKLIGHT_CLASS_DEVICE 272 help 273 Say Y here if you want to enable support for Kingdisplay kd097d04 274 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 275 24 bit RGB per pixel. It provides a MIPI DSI interface to 276 the host and has a built-in LED backlight. 277 278config DRM_PANEL_LEADTEK_LTK050H3146W 279 tristate "Leadtek LTK050H3146W panel" 280 depends on OF 281 depends on DRM_MIPI_DSI 282 depends on BACKLIGHT_CLASS_DEVICE 283 help 284 Say Y here if you want to enable support for Leadtek LTK050H3146W 285 TFT-LCD modules. The panel has a 720x1280 resolution and uses 286 24 bit RGB per pixel. It provides a MIPI DSI interface to 287 the host and has a built-in LED backlight. 288 289config DRM_PANEL_LEADTEK_LTK500HD1829 290 tristate "Leadtek LTK500HD1829 panel" 291 depends on OF 292 depends on DRM_MIPI_DSI 293 depends on BACKLIGHT_CLASS_DEVICE 294 help 295 Say Y here if you want to enable support for Kingdisplay kd097d04 296 TFT-LCD modules. The panel has a 1536x2048 resolution and uses 297 24 bit RGB per pixel. It provides a MIPI DSI interface to 298 the host and has a built-in LED backlight. 299 300config DRM_PANEL_SAMSUNG_LD9040 301 tristate "Samsung LD9040 RGB/SPI panel" 302 depends on OF && SPI 303 select VIDEOMODE_HELPERS 304 305config DRM_PANEL_LG_LB035Q02 306 tristate "LG LB035Q024573 RGB panel" 307 depends on GPIOLIB && OF && SPI 308 help 309 Say Y here if you want to enable support for the LB035Q02 RGB panel 310 (found on the Gumstix Overo Palo35 board). To compile this driver as 311 a module, choose M here. 312 313config DRM_PANEL_LG_LG4573 314 tristate "LG4573 RGB/SPI panel" 315 depends on OF && SPI 316 select VIDEOMODE_HELPERS 317 help 318 Say Y here if you want to enable support for LG4573 RGB panel. 319 To compile this driver as a module, choose M here. 320 321config DRM_PANEL_MAGNACHIP_D53E6EA8966 322 tristate "Magnachip D53E6EA8966 DSI panel" 323 depends on OF && SPI 324 depends on DRM_MIPI_DSI 325 depends on BACKLIGHT_CLASS_DEVICE 326 select DRM_MIPI_DBI 327 help 328 DRM panel driver for the Samsung AMS495QA01 panel controlled 329 with the Magnachip D53E6EA8966 panel IC. This panel receives 330 video data via DSI but commands via 9-bit SPI using DBI. 331 332config DRM_PANEL_NEC_NL8048HL11 333 tristate "NEC NL8048HL11 RGB panel" 334 depends on GPIOLIB && OF && SPI 335 help 336 Say Y here if you want to enable support for the NEC NL8048HL11 RGB 337 panel (found on the Zoom2/3/3630 SDP boards). To compile this driver 338 as a module, choose M here. 339 340config DRM_PANEL_NEWVISION_NV3051D 341 tristate "NewVision NV3051D DSI panel" 342 depends on OF 343 depends on DRM_MIPI_DSI 344 depends on BACKLIGHT_CLASS_DEVICE 345 help 346 This driver supports the NV3051D based panel found on the Anbernic 347 RG353P and RG353V. 348 349config DRM_PANEL_NEWVISION_NV3052C 350 tristate "NewVision NV3052C RGB/SPI panel" 351 depends on OF && SPI 352 depends on BACKLIGHT_CLASS_DEVICE 353 select DRM_MIPI_DBI 354 help 355 Say Y here if you want to enable support for the panels built 356 around the NewVision NV3052C display controller. 357 358config DRM_PANEL_NOVATEK_NT35510 359 tristate "Novatek NT35510 RGB panel driver" 360 depends on OF 361 depends on DRM_MIPI_DSI 362 depends on BACKLIGHT_CLASS_DEVICE 363 help 364 Say Y here if you want to enable support for the panels built 365 around the Novatek NT35510 display controller, such as some 366 Hydis panels. 367 368config DRM_PANEL_NOVATEK_NT35560 369 tristate "Novatek NT35560 DSI command mode panel" 370 depends on OF 371 depends on DRM_MIPI_DSI 372 depends on BACKLIGHT_CLASS_DEVICE 373 select VIDEOMODE_HELPERS 374 help 375 Say Y here if you want to enable the Novatek NT35560 display 376 controller. This panel supports DSI in both command and video 377 mode. This supports several panels such as Sony ACX424AKM and 378 ACX424AKP. 379 380config DRM_PANEL_NOVATEK_NT35950 381 tristate "Novatek NT35950 DSI panel" 382 depends on OF 383 depends on DRM_MIPI_DSI 384 depends on BACKLIGHT_CLASS_DEVICE 385 help 386 Say Y here if you want to enable support for the panels built 387 around the Novatek NT35950 display controller, such as some 388 Sharp panels used in Sony Xperia Z5 Premium and XZ Premium 389 mobile phones. 390 391config DRM_PANEL_NOVATEK_NT36672A 392 tristate "Novatek NT36672A DSI panel" 393 depends on OF 394 depends on DRM_MIPI_DSI 395 depends on BACKLIGHT_CLASS_DEVICE 396 help 397 Say Y here if you want to enable support for the panels built 398 around the Novatek NT36672A display controller, such as some 399 Tianma panels used in a few Xiaomi Poco F1 mobile phones. 400 401config DRM_PANEL_NOVATEK_NT39016 402 tristate "Novatek NT39016 RGB/SPI panel" 403 depends on OF && SPI 404 depends on BACKLIGHT_CLASS_DEVICE 405 select REGMAP_SPI 406 help 407 Say Y here if you want to enable support for the panels built 408 around the Novatek NT39016 display controller. 409 410config DRM_PANEL_MANTIX_MLAF057WE51 411 tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel" 412 depends on OF 413 depends on DRM_MIPI_DSI 414 depends on BACKLIGHT_CLASS_DEVICE 415 help 416 Say Y here if you want to enable support for the Mantix 417 MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It 418 has a resolution of 720x1440 pixels, a built in backlight and touch 419 controller. 420 421config DRM_PANEL_OLIMEX_LCD_OLINUXINO 422 tristate "Olimex LCD-OLinuXino panel" 423 depends on OF 424 depends on I2C 425 depends on BACKLIGHT_CLASS_DEVICE 426 select CRC32 427 help 428 The panel is used with different sizes LCDs, from 480x272 to 429 1280x800, and 24 bit per pixel. 430 431 Say Y here if you want to enable support for Olimex Ltd. 432 LCD-OLinuXino panel. 433 434config DRM_PANEL_ORISETECH_OTA5601A 435 tristate "Orise Technology ota5601a RGB/SPI panel" 436 depends on SPI 437 depends on BACKLIGHT_CLASS_DEVICE 438 select REGMAP_SPI 439 help 440 Say Y here if you want to enable support for the panels built 441 around the Orise Technology OTA9601A display controller. 442 443config DRM_PANEL_ORISETECH_OTM8009A 444 tristate "Orise Technology otm8009a 480x800 dsi 2dl panel" 445 depends on OF 446 depends on DRM_MIPI_DSI 447 depends on BACKLIGHT_CLASS_DEVICE 448 help 449 Say Y here if you want to enable support for Orise Technology 450 otm8009a 480x800 dsi 2dl panel. 451 452config DRM_PANEL_OSD_OSD101T2587_53TS 453 tristate "OSD OSD101T2587-53TS DSI 1920x1200 video mode panel" 454 depends on OF 455 depends on DRM_MIPI_DSI 456 depends on BACKLIGHT_CLASS_DEVICE 457 help 458 Say Y here if you want to enable support for One Stop Displays 459 OSD101T2587-53TS 10.1" 1920x1200 dsi panel. 460 461config DRM_PANEL_PANASONIC_VVX10F034N00 462 tristate "Panasonic VVX10F034N00 1920x1200 video mode panel" 463 depends on OF 464 depends on DRM_MIPI_DSI 465 depends on BACKLIGHT_CLASS_DEVICE 466 help 467 Say Y here if you want to enable support for Panasonic VVX10F034N00 468 WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some 469 Xperia Z2 tablets 470 471config DRM_PANEL_RASPBERRYPI_TOUCHSCREEN 472 tristate "Raspberry Pi 7-inch touchscreen panel" 473 depends on DRM_MIPI_DSI 474 help 475 Say Y here if you want to enable support for the Raspberry 476 Pi 7" Touchscreen. To compile this driver as a module, 477 choose M here. 478 479config DRM_PANEL_RAYDIUM_RM67191 480 tristate "Raydium RM67191 FHD 1080x1920 DSI video mode panel" 481 depends on OF 482 depends on DRM_MIPI_DSI 483 depends on BACKLIGHT_CLASS_DEVICE 484 help 485 Say Y here if you want to enable support for Raydium RM67191 FHD 486 (1080x1920) DSI panel. 487 488config DRM_PANEL_RAYDIUM_RM68200 489 tristate "Raydium RM68200 720x1280 DSI video mode panel" 490 depends on OF 491 depends on DRM_MIPI_DSI 492 depends on BACKLIGHT_CLASS_DEVICE 493 help 494 Say Y here if you want to enable support for Raydium RM68200 495 720x1280 DSI video mode panel. 496 497config DRM_PANEL_RONBO_RB070D30 498 tristate "Ronbo Electronics RB070D30 panel" 499 depends on OF 500 depends on DRM_MIPI_DSI 501 depends on BACKLIGHT_CLASS_DEVICE 502 help 503 Say Y here if you want to enable support for Ronbo Electronics 504 RB070D30 1024x600 DSI panel. 505 506config DRM_PANEL_SAMSUNG_ATNA33XC20 507 tristate "Samsung ATNA33XC20 eDP panel" 508 depends on OF 509 depends on BACKLIGHT_CLASS_DEVICE 510 depends on PM 511 select DRM_DISPLAY_DP_HELPER 512 select DRM_DISPLAY_HELPER 513 select DRM_DP_AUX_BUS 514 help 515 DRM panel driver for the Samsung ATNA33XC20 panel. This panel can't 516 be handled by the DRM_PANEL_SIMPLE driver because its power 517 sequencing is non-standard. 518 519config DRM_PANEL_SAMSUNG_DB7430 520 tristate "Samsung DB7430-based DPI panels" 521 depends on OF && SPI && GPIOLIB 522 depends on BACKLIGHT_CLASS_DEVICE 523 select DRM_MIPI_DBI 524 help 525 Say Y here if you want to enable support for the Samsung 526 DB7430 DPI display controller used in such devices as the 527 LMS397KF04 480x800 DPI panel. 528 529config DRM_PANEL_SAMSUNG_S6D16D0 530 tristate "Samsung S6D16D0 DSI video mode panel" 531 depends on OF 532 depends on DRM_MIPI_DSI 533 select VIDEOMODE_HELPERS 534 535config DRM_PANEL_SAMSUNG_S6D27A1 536 tristate "Samsung S6D27A1 DPI panel driver" 537 depends on OF && SPI && GPIOLIB 538 select DRM_MIPI_DBI 539 help 540 Say Y here if you want to enable support for the Samsung 541 S6D27A1 DPI 480x800 panel. 542 543 This panel can be found in Samsung Galaxy Ace 2 544 GT-I8160 mobile phone. 545 546config DRM_PANEL_SAMSUNG_S6E3HA2 547 tristate "Samsung S6E3HA2 DSI video mode panel" 548 depends on OF 549 depends on DRM_MIPI_DSI 550 depends on BACKLIGHT_CLASS_DEVICE 551 select VIDEOMODE_HELPERS 552 553config DRM_PANEL_SAMSUNG_S6E63J0X03 554 tristate "Samsung S6E63J0X03 DSI command mode panel" 555 depends on OF 556 depends on DRM_MIPI_DSI 557 depends on BACKLIGHT_CLASS_DEVICE 558 select VIDEOMODE_HELPERS 559 560config DRM_PANEL_SAMSUNG_S6E63M0 561 tristate "Samsung S6E63M0 RGB panel" 562 depends on OF 563 depends on BACKLIGHT_CLASS_DEVICE 564 help 565 Say Y here if you want to enable support for Samsung S6E63M0 566 AMOLED LCD panel. This panel can be accessed using SPI or 567 DSI. 568 569config DRM_PANEL_SAMSUNG_S6E63M0_SPI 570 tristate "Samsung S6E63M0 RGB SPI interface" 571 depends on SPI 572 depends on DRM_PANEL_SAMSUNG_S6E63M0 573 default DRM_PANEL_SAMSUNG_S6E63M0 574 select DRM_MIPI_DBI 575 help 576 Say Y here if you want to be able to access the Samsung 577 S6E63M0 panel using SPI. 578 579config DRM_PANEL_SAMSUNG_S6E63M0_DSI 580 tristate "Samsung S6E63M0 RGB DSI interface" 581 depends on DRM_MIPI_DSI 582 depends on DRM_PANEL_SAMSUNG_S6E63M0 583 help 584 Say Y here if you want to be able to access the Samsung 585 S6E63M0 panel using DSI. 586 587config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01 588 tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller" 589 depends on OF 590 select DRM_MIPI_DSI 591 select VIDEOMODE_HELPERS 592 593config DRM_PANEL_SAMSUNG_S6E8AA0 594 tristate "Samsung S6E8AA0 DSI video mode panel" 595 depends on OF 596 select DRM_MIPI_DSI 597 select VIDEOMODE_HELPERS 598 599config DRM_PANEL_SAMSUNG_SOFEF00 600 tristate "Samsung sofef00/s6e3fc2x01 OnePlus 6/6T DSI cmd mode panels" 601 depends on OF 602 depends on DRM_MIPI_DSI 603 depends on BACKLIGHT_CLASS_DEVICE 604 select VIDEOMODE_HELPERS 605 help 606 Say Y or M here if you want to enable support for the Samsung AMOLED 607 command mode panels found in the OnePlus 6/6T smartphones. 608 609 The panels are 2280x1080@60Hz and 2340x1080@60Hz respectively 610 611config DRM_PANEL_SEIKO_43WVF1G 612 tristate "Seiko 43WVF1G panel" 613 depends on OF 614 depends on BACKLIGHT_CLASS_DEVICE 615 select VIDEOMODE_HELPERS 616 help 617 Say Y here if you want to enable support for the Seiko 618 43WVF1G controller for 800x480 LCD panels 619 620config DRM_PANEL_SHARP_LQ101R1SX01 621 tristate "Sharp LQ101R1SX01 panel" 622 depends on OF 623 depends on DRM_MIPI_DSI 624 depends on BACKLIGHT_CLASS_DEVICE 625 help 626 Say Y here if you want to enable support for Sharp LQ101R1SX01 627 TFT-LCD modules. The panel has a 2560x1600 resolution and uses 628 24 bit RGB per pixel. It provides a dual MIPI DSI interface to 629 the host and has a built-in LED backlight. 630 631 To compile this driver as a module, choose M here: the module 632 will be called panel-sharp-lq101r1sx01. 633 634config DRM_PANEL_SHARP_LS037V7DW01 635 tristate "Sharp LS037V7DW01 VGA LCD panel" 636 depends on GPIOLIB && OF && REGULATOR 637 help 638 Say Y here if you want to enable support for Sharp LS037V7DW01 VGA 639 (480x640) LCD panel (found on the TI SDP3430 board). 640 641config DRM_PANEL_SHARP_LS043T1LE01 642 tristate "Sharp LS043T1LE01 qHD video mode panel" 643 depends on OF 644 depends on DRM_MIPI_DSI 645 depends on BACKLIGHT_CLASS_DEVICE 646 help 647 Say Y here if you want to enable support for Sharp LS043T1LE01 qHD 648 (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard 649 650config DRM_PANEL_SHARP_LS060T1SX01 651 tristate "Sharp LS060T1SX01 FullHD video mode panel" 652 depends on OF 653 depends on DRM_MIPI_DSI 654 depends on BACKLIGHT_CLASS_DEVICE 655 help 656 Say Y here if you want to enable support for Sharp LS060T1SX01 6.0" 657 FullHD (1080x1920) DSI panel as found in Dragonboard Display Adapter 658 Bundle. 659 660config DRM_PANEL_SITRONIX_ST7701 661 tristate "Sitronix ST7701 panel driver" 662 depends on OF 663 depends on DRM_MIPI_DSI 664 depends on BACKLIGHT_CLASS_DEVICE 665 help 666 Say Y here if you want to enable support for the Sitronix 667 ST7701 controller for 480X864 LCD panels with MIPI/RGB/SPI 668 system interfaces. 669 670config DRM_PANEL_SITRONIX_ST7703 671 tristate "Sitronix ST7703 based MIPI touchscreen panels" 672 depends on OF 673 depends on DRM_MIPI_DSI 674 depends on BACKLIGHT_CLASS_DEVICE 675 help 676 Say Y here if you want to enable support for Sitronix ST7703 based 677 panels, souch as Rocktech JH057N00900 MIPI DSI panel as e.g. used in 678 the Librem 5 devkit. It has a resolution of 720x1440 pixels, a built 679 in backlight and touch controller. 680 Touch input support is provided by the goodix driver and needs to be 681 selected separately. 682 683config DRM_PANEL_SITRONIX_ST7789V 684 tristate "Sitronix ST7789V panel" 685 depends on OF && SPI 686 depends on BACKLIGHT_CLASS_DEVICE 687 help 688 Say Y here if you want to enable support for the Sitronix 689 ST7789V controller for 240x320 LCD panels 690 691config DRM_PANEL_SONY_ACX565AKM 692 tristate "Sony ACX565AKM panel" 693 depends on GPIOLIB && OF && SPI 694 depends on BACKLIGHT_CLASS_DEVICE 695 help 696 Say Y here if you want to enable support for the Sony ACX565AKM 697 800x600 3.5" panel (found on the Nokia N900). 698 699config DRM_PANEL_SONY_TULIP_TRULY_NT35521 700 tristate "Sony Tulip Truly NT35521 panel" 701 depends on GPIOLIB && OF 702 depends on DRM_MIPI_DSI 703 depends on BACKLIGHT_CLASS_DEVICE 704 help 705 Say Y here if you want to enable support for the Sony Tulip 706 NT35521 1280x720 video mode panel as found on Sony Xperia M4 707 Aqua phone. 708 709config DRM_PANEL_TDO_TL070WSH30 710 tristate "TDO TL070WSH30 DSI panel" 711 depends on OF 712 depends on DRM_MIPI_DSI 713 depends on BACKLIGHT_CLASS_DEVICE 714 help 715 Say Y here if you want to enable support for TDO TL070WSH30 TFT-LCD 716 panel module. The panel has a 1024×600 resolution and uses 717 24 bit RGB per pixel. It provides a MIPI DSI interface to 718 the host, a built-in LED backlight and touch controller. 719 720config DRM_PANEL_TPO_TD028TTEC1 721 tristate "Toppoly (TPO) TD028TTEC1 panel driver" 722 depends on OF && SPI 723 depends on BACKLIGHT_CLASS_DEVICE 724 help 725 Say Y here if you want to enable support for TPO TD028TTEC1 480x640 726 2.8" panel (found on the OpenMoko Neo FreeRunner and Neo 1973). 727 728config DRM_PANEL_TPO_TD043MTEA1 729 tristate "Toppoly (TPO) TD043MTEA1 panel driver" 730 depends on GPIOLIB && OF && REGULATOR && SPI 731 help 732 Say Y here if you want to enable support for TPO TD043MTEA1 800x480 733 4.3" panel (found on the OMAP3 Pandora board). 734 735config DRM_PANEL_TPO_TPG110 736 tristate "TPO TPG 800x400 panel" 737 depends on OF && SPI && GPIOLIB 738 depends on BACKLIGHT_CLASS_DEVICE 739 help 740 Say Y here if you want to enable support for TPO TPG110 741 400CH LTPS TFT LCD Single Chip Digital Driver for up to 742 800x400 LCD panels. 743 744config DRM_PANEL_TRULY_NT35597_WQXGA 745 tristate "Truly WQXGA" 746 depends on OF 747 depends on DRM_MIPI_DSI 748 help 749 Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI 750 Video Mode panel 751 752config DRM_PANEL_VISIONOX_RM69299 753 tristate "Visionox RM69299" 754 depends on OF 755 depends on DRM_MIPI_DSI 756 help 757 Say Y here if you want to enable support for Visionox 758 RM69299 DSI Video Mode panel. 759 760config DRM_PANEL_VISIONOX_VTDR6130 761 tristate "Visionox VTDR6130" 762 depends on OF 763 depends on DRM_MIPI_DSI 764 depends on BACKLIGHT_CLASS_DEVICE 765 help 766 Say Y here if you want to enable support for Visionox 767 VTDR6130 1080x2400 AMOLED DSI panel. 768 769config DRM_PANEL_WIDECHIPS_WS2401 770 tristate "Widechips WS2401 DPI panel driver" 771 depends on SPI && GPIOLIB 772 depends on BACKLIGHT_CLASS_DEVICE 773 select DRM_MIPI_DBI 774 help 775 Say Y here if you want to enable support for the Widechips WS2401 DPI 776 480x800 display controller used in panels such as Samsung LMS380KF01. 777 This display is used in the Samsung Galaxy Ace 2 GT-I8160 (Codina). 778 779config DRM_PANEL_XINPENG_XPP055C272 780 tristate "Xinpeng XPP055C272 panel driver" 781 depends on OF 782 depends on DRM_MIPI_DSI 783 depends on BACKLIGHT_CLASS_DEVICE 784 help 785 Say Y here if you want to enable support for the Xinpeng 786 XPP055C272 controller for 720x1280 LCD panels with MIPI/RGB/SPI 787 system interfaces. 788endmenu 789